summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/serial/of-serial.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/serial/of-serial.txt')
-rw-r--r--Documentation/devicetree/bindings/serial/of-serial.txt49
1 files changed, 49 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/serial/of-serial.txt b/Documentation/devicetree/bindings/serial/of-serial.txt
new file mode 100644
index 000000000000..1928a3e83cd0
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/of-serial.txt
@@ -0,0 +1,49 @@
+* UART (Universal Asynchronous Receiver/Transmitter)
+
+Required properties:
+- compatible : one of:
+ - "ns8250"
+ - "ns16450"
+ - "ns16550a"
+ - "ns16550"
+ - "ns16750"
+ - "ns16850"
+ - "nvidia,tegra20-uart"
+ - "nxp,lpc3220-uart"
+ - "ibm,qpace-nwp-serial"
+ - "altr,16550-FIFO32"
+ - "altr,16550-FIFO64"
+ - "altr,16550-FIFO128"
+ - "serial" if the port type is unknown.
+- reg : offset and length of the register set for the device.
+- interrupts : should contain uart interrupt.
+- clock-frequency : the input clock frequency for the UART
+ or
+ clocks phandle to refer to the clk used as per Documentation/devicetree
+ /bindings/clock/clock-bindings.txt
+
+Optional properties:
+- current-speed : the current active speed of the UART.
+- reg-offset : offset to apply to the mapbase from the start of the registers.
+- reg-shift : quantity to shift the register offsets by.
+- reg-io-width : the size (in bytes) of the IO accesses that should be
+ performed on the device. There are some systems that require 32-bit
+ accesses to the UART (e.g. TI davinci).
+- used-by-rtas : set to indicate that the port is in use by the OpenFirmware
+ RTAS and should not be registered.
+- no-loopback-test: set to indicate that the port does not implements loopback
+ test mode
+- fifo-size: the fifo size of the UART.
+- auto-flow-control: one way to enable automatic flow control support. The
+ driver is allowed to detect support for the capability even without this
+ property.
+
+Example:
+
+ uart@80230000 {
+ compatible = "ns8250";
+ reg = <0x80230000 0x100>;
+ clock-frequency = <3686400>;
+ interrupts = <10>;
+ reg-shift = <2>;
+ };