1 files changed, 73 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/hsi/omap_ssi.txt b/Documentation/devicetree/bindings/hsi/omap_ssi.txt
new file mode 100644
index 000000000000..e3597ebd76c7
--- /dev/null
+++ b/Documentation/devicetree/bindings/hsi/omap_ssi.txt
@@ -0,0 +1,73 @@
+OMAP SSI controller bindings
+
+Required properties:
+- compatible:		Should be set to the following value
+                        ti,omap3-ssi (applicable to OMAP34xx devices)
+- ti,hwmods:		Name of the hwmod associated to the controller, which
+			is "ssi".
+- reg:			Contains SSI register address range (base address and
+			length).
+- reg-names:		Contains the names of the address ranges. It's
+                        expected, that "sys" and "gdd" address ranges are
+			provided.
+- interrupts: 		Contains the interrupt information for the controller.
+- interrupt-names:      Contains the names of the interrupts. It's expected,
+			that "gdd_mpu" is provided.
+- ranges		Required as an empty node
+- #address-cells	Should be set to <1>
+- #size-cells		Should be set to <1>
+
+Each port is represented as a sub-node of the ti,omap3-ssi device.
+
+Required Port sub-node properties:
+- compatible:		Should be set to the following value
+                        ti,omap3-ssi-port (applicable to OMAP34xx devices)
+- reg:			Contains port's register address range (base address
+			and length).
+- reg-names:		Contains the names of the address ranges. It's
+                        expected, that "tx" and "rx" address ranges are
+			provided.
+- interrupt-parent	Should be a phandle for the interrupt controller
+- interrupts:		Contains the interrupt information for the port.
+- interrupt-names:	Contains the names of the interrupts. It's expected,
+			that "mpu_irq0" and "mpu_irq1" are provided.
+- ti,ssi-cawake-gpio:	Defines which GPIO pin is used to signify CAWAKE
+			events for the port. This is an optional board-specific
+			property. If it's missing the port will not be
+			enabled.
+
+Example for Nokia N900:
+
+ssi-controller@48058000 {
+	compatible = "ti,omap3-ssi";
+	ti,hwmods = "ssi";
+
+	reg = <0x48058000 0x1000>,
+	      <0x48059000 0x1000>;
+	reg-names = "sys",
+		    "gdd";
+
+	interrupts = <55>;
+	interrupt-names = "gdd_mpu";
+
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges;
+
+	ssi-port@0 {
+		compatible = "ti,omap3-ssi-port";
+
+		reg = <0x4805a000 0x800>,
+		      <0x4805a800 0x800>;
+		reg-names = "tx",
+			    "rx";
+
+		interrupt-parent = <&intc>;
+		interrupts = <51>,
+			     <52>;
+		interrupt-names = "mpu_irq0",
+				  "mpu_irq1";
+
+		ti,ssi-cawake-gpio = <&gpio5 23 GPIO_ACTIVE_HIGH>; /* 151 */
+	}
+}