diff options
Diffstat (limited to 'Documentation/devicetree/bindings/drm/tilcdc/panel.txt')
-rw-r--r-- | Documentation/devicetree/bindings/drm/tilcdc/panel.txt | 66 |
1 files changed, 0 insertions, 66 deletions
diff --git a/Documentation/devicetree/bindings/drm/tilcdc/panel.txt b/Documentation/devicetree/bindings/drm/tilcdc/panel.txt deleted file mode 100644 index 4ab9e2300907..000000000000 --- a/Documentation/devicetree/bindings/drm/tilcdc/panel.txt +++ /dev/null @@ -1,66 +0,0 @@ -Device-Tree bindings for tilcdc DRM generic panel output driver - -Required properties: - - compatible: value should be "ti,tilcdc,panel". - - panel-info: configuration info to configure LCDC correctly for the panel - - ac-bias: AC Bias Pin Frequency - - ac-bias-intrpt: AC Bias Pin Transitions per Interrupt - - dma-burst-sz: DMA burst size - - bpp: Bits per pixel - - fdd: FIFO DMA Request Delay - - sync-edge: Horizontal and Vertical Sync Edge: 0=rising 1=falling - - sync-ctrl: Horizontal and Vertical Sync: Control: 0=ignore - - raster-order: Raster Data Order Select: 1=Most-to-least 0=Least-to-most - - fifo-th: DMA FIFO threshold - - display-timings: typical videomode of lcd panel. Multiple video modes - can be listed if the panel supports multiple timings, but the 'native-mode' - should be the preferred/default resolution. Refer to - Documentation/devicetree/bindings/video/display-timing.txt for display - timing binding details. - -Optional properties: -- backlight: phandle of the backlight device attached to the panel -- enable-gpios: GPIO pin to enable or disable the panel - -Recommended properties: - - pinctrl-names, pinctrl-0: the pincontrol settings to configure - muxing properly for pins that connect to TFP410 device - -Example: - - /* Settings for CDTech_S035Q01 / LCD3 cape: */ - lcd3 { - compatible = "ti,tilcdc,panel"; - pinctrl-names = "default"; - pinctrl-0 = <&bone_lcd3_cape_lcd_pins>; - backlight = <&backlight>; - enable-gpios = <&gpio3 19 0>; - - panel-info { - ac-bias = <255>; - ac-bias-intrpt = <0>; - dma-burst-sz = <16>; - bpp = <16>; - fdd = <0x80>; - sync-edge = <0>; - sync-ctrl = <1>; - raster-order = <0>; - fifo-th = <0>; - }; - display-timings { - native-mode = <&timing0>; - timing0: 320x240 { - hactive = <320>; - vactive = <240>; - hback-porch = <21>; - hfront-porch = <58>; - hsync-len = <47>; - vback-porch = <11>; - vfront-porch = <23>; - vsync-len = <2>; - clock-frequency = <8000000>; - hsync-active = <0>; - vsync-active = <0>; - }; - }; - }; |