summaryrefslogtreecommitdiffstats
path: root/Documentation/admin-guide/serial-console.rst
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/admin-guide/serial-console.rst')
-rw-r--r--Documentation/admin-guide/serial-console.rst115
1 files changed, 115 insertions, 0 deletions
diff --git a/Documentation/admin-guide/serial-console.rst b/Documentation/admin-guide/serial-console.rst
new file mode 100644
index 000000000000..a8d1e36b627a
--- /dev/null
+++ b/Documentation/admin-guide/serial-console.rst
@@ -0,0 +1,115 @@
+.. _serial_console:
+
+Linux Serial Console
+====================
+
+To use a serial port as console you need to compile the support into your
+kernel - by default it is not compiled in. For PC style serial ports
+it's the config option next to menu option:
+
+:menuselection:`Character devices --> Serial drivers --> 8250/16550 and compatible serial support --> Console on 8250/16550 and compatible serial port`
+
+You must compile serial support into the kernel and not as a module.
+
+It is possible to specify multiple devices for console output. You can
+define a new kernel command line option to select which device(s) to
+use for console output.
+
+The format of this option is::
+
+ console=device,options
+
+ device: tty0 for the foreground virtual console
+ ttyX for any other virtual console
+ ttySx for a serial port
+ lp0 for the first parallel port
+ ttyUSB0 for the first USB serial device
+
+ options: depend on the driver. For the serial port this
+ defines the baudrate/parity/bits/flow control of
+ the port, in the format BBBBPNF, where BBBB is the
+ speed, P is parity (n/o/e), N is number of bits,
+ and F is flow control ('r' for RTS). Default is
+ 9600n8. The maximum baudrate is 115200.
+
+You can specify multiple console= options on the kernel command line.
+Output will appear on all of them. The last device will be used when
+you open ``/dev/console``. So, for example::
+
+ console=ttyS1,9600 console=tty0
+
+defines that opening ``/dev/console`` will get you the current foreground
+virtual console, and kernel messages will appear on both the VGA
+console and the 2nd serial port (ttyS1 or COM2) at 9600 baud.
+
+Note that you can only define one console per device type (serial, video).
+
+If no console device is specified, the first device found capable of
+acting as a system console will be used. At this time, the system
+first looks for a VGA card and then for a serial port. So if you don't
+have a VGA card in your system the first serial port will automatically
+become the console.
+
+You will need to create a new device to use ``/dev/console``. The official
+``/dev/console`` is now character device 5,1.
+
+(You can also use a network device as a console. See
+``Documentation/networking/netconsole.txt`` for information on that.)
+
+Here's an example that will use ``/dev/ttyS1`` (COM2) as the console.
+Replace the sample values as needed.
+
+1. Create ``/dev/console`` (real console) and ``/dev/tty0`` (master virtual
+ console)::
+
+ cd /dev
+ rm -f console tty0
+ mknod -m 622 console c 5 1
+ mknod -m 622 tty0 c 4 0
+
+2. LILO can also take input from a serial device. This is a very
+ useful option. To tell LILO to use the serial port:
+ In lilo.conf (global section)::
+
+ serial = 1,9600n8 (ttyS1, 9600 bd, no parity, 8 bits)
+
+3. Adjust to kernel flags for the new kernel,
+ again in lilo.conf (kernel section)::
+
+ append = "console=ttyS1,9600"
+
+4. Make sure a getty runs on the serial port so that you can login to
+ it once the system is done booting. This is done by adding a line
+ like this to ``/etc/inittab`` (exact syntax depends on your getty)::
+
+ S1:23:respawn:/sbin/getty -L ttyS1 9600 vt100
+
+5. Init and ``/etc/ioctl.save``
+
+ Sysvinit remembers its stty settings in a file in ``/etc``, called
+ ``/etc/ioctl.save``. REMOVE THIS FILE before using the serial
+ console for the first time, because otherwise init will probably
+ set the baudrate to 38400 (baudrate of the virtual console).
+
+6. ``/dev/console`` and X
+ Programs that want to do something with the virtual console usually
+ open ``/dev/console``. If you have created the new ``/dev/console`` device,
+ and your console is NOT the virtual console some programs will fail.
+ Those are programs that want to access the VT interface, and use
+ ``/dev/console instead of /dev/tty0``. Some of those programs are::
+
+ Xfree86, svgalib, gpm, SVGATextMode
+
+ It should be fixed in modern versions of these programs though.
+
+ Note that if you boot without a ``console=`` option (or with
+ ``console=/dev/tty0``), ``/dev/console`` is the same as ``/dev/tty0``.
+ In that case everything will still work.
+
+7. Thanks
+
+ Thanks to Geert Uytterhoeven <geert@linux-m68k.org>
+ for porting the patches from 2.1.4x to 2.1.6x for taking care of
+ the integration of these patches into m68k, ppc and alpha.
+
+Miquel van Smoorenburg <miquels@cistron.nl>, 11-Jun-2000