summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--drivers/ata/Kconfig5
-rw-r--r--drivers/ata/libata-core.c3
-rw-r--r--drivers/ata/pata_pdc2027x.c11
-rw-r--r--drivers/ata/pata_sis.c46
-rw-r--r--drivers/ata/sata_inic162x.c7
-rw-r--r--drivers/ata/sata_nv.c2
-rw-r--r--drivers/ata/sata_sis.c39
-rw-r--r--drivers/ata/sis.h2
-rw-r--r--drivers/scsi/Kconfig1
9 files changed, 89 insertions, 27 deletions
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index b4a8d6030e48..4ad8675f5a16 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -16,6 +16,11 @@ menuconfig ATA
that "speaks" the ATA protocol, also called ATA controller),
because you will be asked for it.
+ NOTE: ATA enables basic SCSI support; *however*,
+ 'SCSI disk support', 'SCSI tape support', or
+ 'SCSI CDROM support' may also be needed,
+ depending on your hardware configuration.
+
if ATA
config ATA_NONSTANDARD
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index bfc59a104728..2407f8482948 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -3798,6 +3798,7 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
/* Drives which do spurious command completion */
{ "HTS541680J9SA00", "SB2IC7EP", ATA_HORKAGE_NONCQ, },
{ "HTS541612J9SA00", "SBDIC7JP", ATA_HORKAGE_NONCQ, },
+ { "Hitachi HTS541616J9SA00", "SB4OC70P", ATA_HORKAGE_NONCQ, },
{ "WDC WD740ADFD-00NLR1", NULL, ATA_HORKAGE_NONCQ, },
/* Devices with NCQ limits */
@@ -4781,8 +4782,6 @@ static void ata_hsm_qc_complete(struct ata_queued_cmd *qc, int in_wq)
} else
ata_qc_complete(qc);
}
-
- ata_altstatus(ap); /* flush */
}
/**
diff --git a/drivers/ata/pata_pdc2027x.c b/drivers/ata/pata_pdc2027x.c
index 0d2cc49fde4b..69a5aa4949f5 100644
--- a/drivers/ata/pata_pdc2027x.c
+++ b/drivers/ata/pata_pdc2027x.c
@@ -689,10 +689,12 @@ static long pdc_detect_pll_input_clock(struct ata_host *host)
void __iomem *mmio_base = host->iomap[PDC_MMIO_BAR];
u32 scr;
long start_count, end_count;
- long pll_clock;
+ struct timeval start_time, end_time;
+ long pll_clock, usec_elapsed;
/* Read current counter value */
start_count = pdc_read_counter(host);
+ do_gettimeofday(&start_time);
/* Start the test mode */
scr = readl(mmio_base + PDC_SYS_CTL);
@@ -705,6 +707,7 @@ static long pdc_detect_pll_input_clock(struct ata_host *host)
/* Read the counter values again */
end_count = pdc_read_counter(host);
+ do_gettimeofday(&end_time);
/* Stop the test mode */
scr = readl(mmio_base + PDC_SYS_CTL);
@@ -713,7 +716,11 @@ static long pdc_detect_pll_input_clock(struct ata_host *host)
readl(mmio_base + PDC_SYS_CTL); /* flush */
/* calculate the input clock in Hz */
- pll_clock = (start_count - end_count) * 10;
+ usec_elapsed = (end_time.tv_sec - start_time.tv_sec) * 1000000 +
+ (end_time.tv_usec - start_time.tv_usec);
+
+ pll_clock = (start_count - end_count) / 100 *
+ (100000000 / usec_elapsed);
PDPRINTK("start[%ld] end[%ld] \n", start_count, end_count);
PDPRINTK("PLL input clock[%ld]Hz\n", pll_clock);
diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c
index ec3ae9375015..cfe4ec6eb3d5 100644
--- a/drivers/ata/pata_sis.c
+++ b/drivers/ata/pata_sis.c
@@ -560,6 +560,40 @@ static const struct ata_port_operations sis_133_ops = {
.port_start = ata_port_start,
};
+static const struct ata_port_operations sis_133_for_sata_ops = {
+ .port_disable = ata_port_disable,
+ .set_piomode = sis_133_set_piomode,
+ .set_dmamode = sis_133_set_dmamode,
+ .mode_filter = ata_pci_default_filter,
+
+ .tf_load = ata_tf_load,
+ .tf_read = ata_tf_read,
+ .check_status = ata_check_status,
+ .exec_command = ata_exec_command,
+ .dev_select = ata_std_dev_select,
+
+ .freeze = ata_bmdma_freeze,
+ .thaw = ata_bmdma_thaw,
+ .error_handler = ata_bmdma_error_handler,
+ .post_internal_cmd = ata_bmdma_post_internal_cmd,
+ .cable_detect = sis_133_cable_detect,
+
+ .bmdma_setup = ata_bmdma_setup,
+ .bmdma_start = ata_bmdma_start,
+ .bmdma_stop = ata_bmdma_stop,
+ .bmdma_status = ata_bmdma_status,
+ .qc_prep = ata_qc_prep,
+ .qc_issue = ata_qc_issue_prot,
+ .data_xfer = ata_data_xfer,
+
+ .irq_handler = ata_interrupt,
+ .irq_clear = ata_bmdma_irq_clear,
+ .irq_on = ata_irq_on,
+ .irq_ack = ata_irq_ack,
+
+ .port_start = ata_port_start,
+};
+
static const struct ata_port_operations sis_133_early_ops = {
.port_disable = ata_port_disable,
.set_piomode = sis_100_set_piomode,
@@ -733,13 +767,20 @@ static const struct ata_port_info sis_info100_early = {
.pio_mask = 0x1f, /* pio0-4 */
.port_ops = &sis_66_ops,
};
-const struct ata_port_info sis_info133 = {
+static const struct ata_port_info sis_info133 = {
.sht = &sis_sht,
.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
.pio_mask = 0x1f, /* pio0-4 */
.udma_mask = ATA_UDMA6,
.port_ops = &sis_133_ops,
};
+const struct ata_port_info sis_info133_for_sata = {
+ .sht = &sis_sht,
+ .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+ .pio_mask = 0x1f, /* pio0-4 */
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &sis_133_for_sata_ops,
+};
static const struct ata_port_info sis_info133_early = {
.sht = &sis_sht,
.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
@@ -749,7 +790,7 @@ static const struct ata_port_info sis_info133_early = {
};
/* Privately shared with the SiS180 SATA driver, not for use elsewhere */
-EXPORT_SYMBOL_GPL(sis_info133);
+EXPORT_SYMBOL_GPL(sis_info133_for_sata);
static void sis_fixup(struct pci_dev *pdev, struct sis_chipset *sis)
{
@@ -975,6 +1016,7 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
static const struct pci_device_id sis_pci_tbl[] = {
{ PCI_VDEVICE(SI, 0x5513), }, /* SiS 5513 */
{ PCI_VDEVICE(SI, 0x5518), }, /* SiS 5518 */
+ { PCI_VDEVICE(SI, 0x1180), }, /* SiS 1180 */
{ }
};
diff --git a/drivers/ata/sata_inic162x.c b/drivers/ata/sata_inic162x.c
index 2d80c9d95e95..dc3bbce04676 100644
--- a/drivers/ata/sata_inic162x.c
+++ b/drivers/ata/sata_inic162x.c
@@ -496,6 +496,13 @@ static void inic_dev_config(struct ata_device *dev)
/* inic can only handle upto LBA28 max sectors */
if (dev->max_sectors > ATA_MAX_SECTORS)
dev->max_sectors = ATA_MAX_SECTORS;
+
+ if (dev->n_sectors >= 1 << 28) {
+ ata_dev_printk(dev, KERN_ERR,
+ "ERROR: This driver doesn't support LBA48 yet and may cause\n"
+ " data corruption on such devices. Disabling.\n");
+ ata_dev_disable(dev);
+ }
}
static void init_port(struct ata_port *ap)
diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index adfa693db53d..d53cb8c47f39 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -307,6 +307,7 @@ static struct scsi_host_template nv_sht = {
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
.queuecommand = ata_scsi_queuecmd,
+ .change_queue_depth = ata_scsi_change_queue_depth,
.can_queue = ATA_DEF_QUEUE,
.this_id = ATA_SHT_THIS_ID,
.sg_tablesize = LIBATA_MAX_PRD,
@@ -325,6 +326,7 @@ static struct scsi_host_template nv_adma_sht = {
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
.queuecommand = ata_scsi_queuecmd,
+ .change_queue_depth = ata_scsi_change_queue_depth,
.can_queue = NV_ADMA_MAX_CPBS,
.this_id = ATA_SHT_THIS_ID,
.sg_tablesize = NV_ADMA_SGTBL_TOTAL_LEN,
diff --git a/drivers/ata/sata_sis.c b/drivers/ata/sata_sis.c
index 221099d1d08f..f111c984a359 100644
--- a/drivers/ata/sata_sis.c
+++ b/drivers/ata/sata_sis.c
@@ -72,8 +72,8 @@ static const struct pci_device_id sis_pci_tbl[] = {
{ PCI_VDEVICE(SI, 0x0181), sis_180 }, /* SiS 964/180 */
{ PCI_VDEVICE(SI, 0x0182), sis_180 }, /* SiS 965/965L */
{ PCI_VDEVICE(SI, 0x0183), sis_180 }, /* SiS 965/965L */
- { PCI_VDEVICE(SI, 0x1182), sis_180 }, /* SiS 966/966L */
- { PCI_VDEVICE(SI, 0x1183), sis_180 }, /* SiS 966/966L */
+ { PCI_VDEVICE(SI, 0x1182), sis_180 }, /* SiS 966/680 */
+ { PCI_VDEVICE(SI, 0x1183), sis_180 }, /* SiS 966/966L/968/680 */
{ } /* terminate list */
};
@@ -161,7 +161,6 @@ static unsigned int get_scr_cfg_addr(struct ata_port *ap, unsigned int sc_reg)
case 0x0182:
case 0x0183:
case 0x1182:
- case 0x1183:
addr += SIS182_SATA1_OFS;
break;
}
@@ -183,8 +182,8 @@ static u32 sis_scr_cfg_read (struct ata_port *ap, unsigned int sc_reg)
pci_read_config_dword(pdev, cfg_addr, &val);
- if ((pdev->device == 0x0182) || (pdev->device == 0x0183) || (pdev->device == 0x1182) ||
- (pdev->device == 0x1183) || (pmr & SIS_PMR_COMBINED))
+ if ((pdev->device == 0x0182) || (pdev->device == 0x0183) ||
+ (pdev->device == 0x1182) || (pmr & SIS_PMR_COMBINED))
pci_read_config_dword(pdev, cfg_addr+0x10, &val2);
return (val|val2) & 0xfffffffb; /* avoid problems with powerdowned ports */
@@ -203,8 +202,8 @@ static void sis_scr_cfg_write (struct ata_port *ap, unsigned int sc_reg, u32 val
pci_write_config_dword(pdev, cfg_addr, val);
- if ((pdev->device == 0x0182) || (pdev->device == 0x0183) || (pdev->device == 0x1182) ||
- (pdev->device == 0x1183) || (pmr & SIS_PMR_COMBINED))
+ if ((pdev->device == 0x0182) || (pdev->device == 0x0183) ||
+ (pdev->device == 0x1182) || (pmr & SIS_PMR_COMBINED))
pci_write_config_dword(pdev, cfg_addr+0x10, val);
}
@@ -224,8 +223,8 @@ static u32 sis_scr_read (struct ata_port *ap, unsigned int sc_reg)
val = ioread32(ap->ioaddr.scr_addr + (sc_reg * 4));
- if ((pdev->device == 0x0182) || (pdev->device == 0x0183) || (pdev->device == 0x1182) ||
- (pdev->device == 0x1183) || (pmr & SIS_PMR_COMBINED))
+ if ((pdev->device == 0x0182) || (pdev->device == 0x0183) ||
+ (pdev->device == 0x1182) || (pmr & SIS_PMR_COMBINED))
val2 = ioread32(ap->ioaddr.scr_addr + (sc_reg * 4) + 0x10);
return (val | val2) & 0xfffffffb;
@@ -245,8 +244,8 @@ static void sis_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val)
sis_scr_cfg_write(ap, sc_reg, val);
else {
iowrite32(val, ap->ioaddr.scr_addr + (sc_reg * 4));
- if ((pdev->device == 0x0182) || (pdev->device == 0x0183) || (pdev->device == 0x1182) ||
- (pdev->device == 0x1183) || (pmr & SIS_PMR_COMBINED))
+ if ((pdev->device == 0x0182) || (pdev->device == 0x0183) ||
+ (pdev->device == 0x1182) || (pmr & SIS_PMR_COMBINED))
iowrite32(val, ap->ioaddr.scr_addr + (sc_reg * 4)+0x10);
}
}
@@ -293,11 +292,11 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
/* The PATA-handling is provided by pata_sis */
switch (pmr & 0x30) {
case 0x10:
- ppi[1] = &sis_info133;
+ ppi[1] = &sis_info133_for_sata;
break;
case 0x30:
- ppi[0] = &sis_info133;
+ ppi[0] = &sis_info133_for_sata;
break;
}
if ((pmr & SIS_PMR_COMBINED) == 0) {
@@ -324,14 +323,14 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
break;
case 0x1182:
+ dev_printk(KERN_INFO, &pdev->dev, "Detected SiS 1182/966/680 SATA controller\n");
+ pi.flags |= ATA_FLAG_SLAVE_POSS;
+ break;
+
case 0x1183:
- pci_read_config_dword(pdev, 0x64, &val);
- if (val & 0x10000000) {
- dev_printk(KERN_INFO, &pdev->dev, "Detected SiS 1182/1183/966L SATA controller\n");
- } else {
- dev_printk(KERN_INFO, &pdev->dev, "Detected SiS 1182/1183/966 SATA controller\n");
- pi.flags |= ATA_FLAG_SLAVE_POSS;
- }
+ dev_printk(KERN_INFO, &pdev->dev, "Detected SiS 1183/966/966L/968/680 controller in PATA mode\n");
+ ppi[0] = &sis_info133_for_sata;
+ ppi[1] = &sis_info133_for_sata;
break;
}
diff --git a/drivers/ata/sis.h b/drivers/ata/sis.h
index 0f2208d8d5ef..f7f3eebe666c 100644
--- a/drivers/ata/sis.h
+++ b/drivers/ata/sis.h
@@ -2,4 +2,4 @@
struct ata_port_info;
/* pata_sis.c */
-extern const struct ata_port_info sis_info133;
+extern const struct ata_port_info sis_info133_for_sata;
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index 2b2f5c12019b..eb46cb0e3cb7 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -60,6 +60,7 @@ config BLK_DEV_SD
depends on SCSI
---help---
If you want to use SCSI hard disks, Fibre Channel disks,
+ Serial ATA (SATA) or Parallel ATA (PATA) hard disks,
USB storage or the SCSI or parallel port version of
the IOMEGA ZIP drive, say Y and read the SCSI-HOWTO,
the Disk-HOWTO and the Multi-Disk-HOWTO, available from
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-09 07:44:02 +0000