diff options
| -rw-r--r-- | drivers/mtd/nand/raw/Kconfig | 13 | ||||
| -rw-r--r-- | drivers/mtd/nand/raw/brcmnand/Makefile | 2 | ||||
| -rw-r--r-- | drivers/mtd/nand/raw/brcmnand/bcma_nand.c | 132 | ||||
| -rw-r--r-- | drivers/mtd/nand/raw/brcmnand/brcmnand.c | 4 |
4 files changed, 151 insertions, 0 deletions
diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig index 20408b7db540..99141b14b059 100644 --- a/drivers/mtd/nand/raw/Kconfig +++ b/drivers/mtd/nand/raw/Kconfig @@ -209,6 +209,19 @@ config MTD_NAND_BRCMNAND originally designed for Set-Top Box but is used on various BCM7xxx, BCM3xxx, BCM63xxx, iProc/Cygnus and more. +if MTD_NAND_BRCMNAND + +config MTD_NAND_BRCMNAND_BCMA + tristate "Broadcom BCMA NAND controller" + depends on BCMA_NFLASH + depends on BCMA + help + Enables the BRCMNAND controller over BCMA on BCM47186/BCM5358 SoCs. + The glue driver will take care of performing the low-level I/O + operations to interface the BRCMNAND controller over the BCMA bus. + +endif # MTD_NAND_BRCMNAND + config MTD_NAND_BCM47XXNFLASH tristate "BCM4706 BCMA NAND controller" depends on BCMA_NFLASH diff --git a/drivers/mtd/nand/raw/brcmnand/Makefile b/drivers/mtd/nand/raw/brcmnand/Makefile index 195b845e48b8..16dc7254200e 100644 --- a/drivers/mtd/nand/raw/brcmnand/Makefile +++ b/drivers/mtd/nand/raw/brcmnand/Makefile @@ -6,3 +6,5 @@ obj-$(CONFIG_MTD_NAND_BRCMNAND) += bcm63138_nand.o obj-$(CONFIG_MTD_NAND_BRCMNAND) += bcm6368_nand.o obj-$(CONFIG_MTD_NAND_BRCMNAND) += brcmstb_nand.o obj-$(CONFIG_MTD_NAND_BRCMNAND) += brcmnand.o + +obj-$(CONFIG_MTD_NAND_BRCMNAND_BCMA) += bcma_nand.o diff --git a/drivers/mtd/nand/raw/brcmnand/bcma_nand.c b/drivers/mtd/nand/raw/brcmnand/bcma_nand.c new file mode 100644 index 000000000000..d7c62988c452 --- /dev/null +++ b/drivers/mtd/nand/raw/brcmnand/bcma_nand.c @@ -0,0 +1,132 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright © 2021 Broadcom + */ +#include <linux/bcma/bcma.h> +#include <linux/bcma/bcma_driver_chipcommon.h> +#include <linux/device.h> +#include <linux/module.h> +#include <linux/platform_device.h> + +#include "brcmnand.h" + +struct brcmnand_bcma_soc { + struct brcmnand_soc soc; + struct bcma_drv_cc *cc; +}; + +static inline bool brcmnand_bcma_needs_swapping(u32 offset) +{ + switch (offset) { + case BCMA_CC_NAND_SPARE_RD0: + case BCMA_CC_NAND_SPARE_RD4: + case BCMA_CC_NAND_SPARE_RD8: + case BCMA_CC_NAND_SPARE_RD12: + case BCMA_CC_NAND_SPARE_WR0: + case BCMA_CC_NAND_SPARE_WR4: + case BCMA_CC_NAND_SPARE_WR8: + case BCMA_CC_NAND_SPARE_WR12: + case BCMA_CC_NAND_DEVID: + case BCMA_CC_NAND_DEVID_X: + case BCMA_CC_NAND_SPARE_RD16: + case BCMA_CC_NAND_SPARE_RD20: + case BCMA_CC_NAND_SPARE_RD24: + case BCMA_CC_NAND_SPARE_RD28: + return true; + } + + return false; +} + +static inline struct brcmnand_bcma_soc *to_bcma_soc(struct brcmnand_soc *soc) +{ + return container_of(soc, struct brcmnand_bcma_soc, soc); +} + +static u32 brcmnand_bcma_read_reg(struct brcmnand_soc *soc, u32 offset) +{ + struct brcmnand_bcma_soc *sc = to_bcma_soc(soc); + u32 val; + + /* Offset into the NAND block and deal with the flash cache separately */ + if (offset == BRCMNAND_NON_MMIO_FC_ADDR) + offset = BCMA_CC_NAND_CACHE_DATA; + else + offset += BCMA_CC_NAND_REVISION; + + val = bcma_cc_read32(sc->cc, offset); + + /* Swap if necessary */ + if (brcmnand_bcma_needs_swapping(offset)) + val = be32_to_cpu(val); + return val; +} + +static void brcmnand_bcma_write_reg(struct brcmnand_soc *soc, u32 val, + u32 offset) +{ + struct brcmnand_bcma_soc *sc = to_bcma_soc(soc); + + /* Offset into the NAND block */ + if (offset == BRCMNAND_NON_MMIO_FC_ADDR) + offset = BCMA_CC_NAND_CACHE_DATA; + else + offset += BCMA_CC_NAND_REVISION; + + /* Swap if necessary */ + if (brcmnand_bcma_needs_swapping(offset)) + val = cpu_to_be32(val); + + bcma_cc_write32(sc->cc, offset, val); +} + +static struct brcmnand_io_ops brcmnand_bcma_io_ops = { + .read_reg = brcmnand_bcma_read_reg, + .write_reg = brcmnand_bcma_write_reg, +}; + +static void brcmnand_bcma_prepare_data_bus(struct brcmnand_soc *soc, bool prepare, + bool is_param) +{ + struct brcmnand_bcma_soc *sc = to_bcma_soc(soc); + + /* Reset the cache address to ensure we are already accessing the + * beginning of a sub-page. + */ + bcma_cc_write32(sc->cc, BCMA_CC_NAND_CACHE_ADDR, 0); +} + +static int brcmnand_bcma_nand_probe(struct platform_device *pdev) +{ + struct bcma_nflash *nflash = dev_get_platdata(&pdev->dev); + struct brcmnand_bcma_soc *soc; + + soc = devm_kzalloc(&pdev->dev, sizeof(*soc), GFP_KERNEL); + if (!soc) + return -ENOMEM; + + soc->cc = container_of(nflash, struct bcma_drv_cc, nflash); + soc->soc.prepare_data_bus = brcmnand_bcma_prepare_data_bus; + soc->soc.ops = &brcmnand_bcma_io_ops; + + if (soc->cc->core->bus->chipinfo.id == BCMA_CHIP_ID_BCM4706) { + dev_err(&pdev->dev, "Use bcm47xxnflash for 4706!\n"); + return -ENODEV; + } + + return brcmnand_probe(pdev, &soc->soc); +} + +static struct platform_driver brcmnand_bcma_nand_driver = { + .probe = brcmnand_bcma_nand_probe, + .remove = brcmnand_remove, + .driver = { + .name = "bcma_brcmnand", + .pm = &brcmnand_pm_ops, + } +}; +module_platform_driver(brcmnand_bcma_nand_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Broadcom"); +MODULE_DESCRIPTION("NAND controller driver glue for BCMA chips"); diff --git a/drivers/mtd/nand/raw/brcmnand/brcmnand.c b/drivers/mtd/nand/raw/brcmnand/brcmnand.c index 4759303ece7c..c412f79b81db 100644 --- a/drivers/mtd/nand/raw/brcmnand/brcmnand.c +++ b/drivers/mtd/nand/raw/brcmnand/brcmnand.c @@ -598,7 +598,11 @@ enum { static inline bool brcmnand_non_mmio_ops(struct brcmnand_controller *ctrl) { +#if IS_ENABLED(CONFIG_MTD_NAND_BRCMNAND_BCMA) return static_branch_unlikely(&brcmnand_soc_has_ops_key); +#else + return false; +#endif } static inline u32 nand_readreg(struct brcmnand_controller *ctrl, u32 offs) |