diff options
| -rw-r--r-- | Documentation/devicetree/bindings/usb/dwc3.txt | 21 | ||||
| -rw-r--r-- | drivers/usb/dwc3/core.c | 88 | ||||
| -rw-r--r-- | drivers/usb/dwc3/core.h | 8 |
3 files changed, 115 insertions, 2 deletions
diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt index 0dbd3083e7dd..7f13ebef06cb 100644 --- a/Documentation/devicetree/bindings/usb/dwc3.txt +++ b/Documentation/devicetree/bindings/usb/dwc3.txt @@ -7,6 +7,26 @@ Required properties: - compatible: must be "snps,dwc3" - reg : Address and length of the register set for the device - interrupts: Interrupts used by the dwc3 controller. + - clock-names: should contain "ref", "bus_early", "suspend" + - clocks: list of phandle and clock specifier pairs corresponding to + entries in the clock-names property. + +Exception for clocks: + clocks are optional if the parent node (i.e. glue-layer) is compatible to + one of the following: + "amlogic,meson-axg-dwc3" + "amlogic,meson-gxl-dwc3" + "cavium,octeon-7130-usb-uctl" + "qcom,dwc3" + "samsung,exynos5250-dwusb3" + "samsung,exynos7-dwusb3" + "sprd,sc9860-dwc3" + "st,stih407-dwc3" + "ti,am437x-dwc3" + "ti,dwc3" + "ti,keystone-dwc3" + "rockchip,rk3399-dwc3" + "xlnx,zynqmp-dwc3" Optional properties: - usb-phy : array of phandle for the PHY device. The first element @@ -15,6 +35,7 @@ Optional properties: - phys: from the *Generic PHY* bindings - phy-names: from the *Generic PHY* bindings; supported names are "usb2-phy" or "usb3-phy". + - resets: a single pair of phandle and reset specifier - snps,usb3_lpm_capable: determines if platform is USB3 LPM capable - snps,disable_scramble_quirk: true when SW should disable data scrambling. Only really useful for FPGA builds. diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 25d7e9d6fb0d..ea91310113b9 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -8,6 +8,7 @@ * Sebastian Andrzej Siewior <bigeasy@linutronix.de> */ +#include <linux/clk.h> #include <linux/version.h> #include <linux/module.h> #include <linux/kernel.h> @@ -24,6 +25,7 @@ #include <linux/of.h> #include <linux/acpi.h> #include <linux/pinctrl/consumer.h> +#include <linux/reset.h> #include <linux/usb/ch9.h> #include <linux/usb/gadget.h> @@ -266,6 +268,12 @@ done: return 0; } +static const struct clk_bulk_data dwc3_core_clks[] = { + { .id = "ref" }, + { .id = "bus_early" }, + { .id = "suspend" }, +}; + /* * dwc3_frame_length_adjustment - Adjusts frame length if required * @dwc3: Pointer to our controller context structure @@ -667,6 +675,9 @@ static void dwc3_core_exit(struct dwc3 *dwc) usb_phy_set_suspend(dwc->usb3_phy, 1); phy_power_off(dwc->usb2_generic_phy); phy_power_off(dwc->usb3_generic_phy); + clk_bulk_disable(dwc->num_clks, dwc->clks); + clk_bulk_unprepare(dwc->num_clks, dwc->clks); + reset_control_assert(dwc->reset); } static bool dwc3_core_is_valid(struct dwc3 *dwc) @@ -1256,6 +1267,12 @@ static int dwc3_probe(struct platform_device *pdev) if (!dwc) return -ENOMEM; + dwc->clks = devm_kmemdup(dev, dwc3_core_clks, sizeof(dwc3_core_clks), + GFP_KERNEL); + if (!dwc->clks) + return -ENOMEM; + + dwc->num_clks = ARRAY_SIZE(dwc3_core_clks); dwc->dev = dev; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); @@ -1286,6 +1303,32 @@ static int dwc3_probe(struct platform_device *pdev) dwc3_get_properties(dwc); + dwc->reset = devm_reset_control_get_optional_shared(dev, NULL); + if (IS_ERR(dwc->reset)) + return PTR_ERR(dwc->reset); + + ret = clk_bulk_get(dev, dwc->num_clks, dwc->clks); + if (ret == -EPROBE_DEFER) + return ret; + /* + * Clocks are optional, but new DT platforms should support all clocks + * as required by the DT-binding. + */ + if (ret) + dwc->num_clks = 0; + + ret = reset_control_deassert(dwc->reset); + if (ret) + goto put_clks; + + ret = clk_bulk_prepare(dwc->num_clks, dwc->clks); + if (ret) + goto assert_reset; + + ret = clk_bulk_enable(dwc->num_clks, dwc->clks); + if (ret) + goto unprepare_clks; + platform_set_drvdata(pdev, dwc); dwc3_cache_hwparams(dwc); @@ -1349,6 +1392,14 @@ err1: pm_runtime_put_sync(&pdev->dev); pm_runtime_disable(&pdev->dev); + clk_bulk_disable(dwc->num_clks, dwc->clks); +unprepare_clks: + clk_bulk_unprepare(dwc->num_clks, dwc->clks); +assert_reset: + reset_control_assert(dwc->reset); +put_clks: + clk_bulk_put(dwc->num_clks, dwc->clks); + return ret; } @@ -1370,11 +1421,44 @@ static int dwc3_remove(struct platform_device *pdev) dwc3_free_event_buffers(dwc); dwc3_free_scratch_buffers(dwc); + clk_bulk_put(dwc->num_clks, dwc->clks); return 0; } #ifdef CONFIG_PM +static int dwc3_core_init_for_resume(struct dwc3 *dwc) +{ + int ret; + + ret = reset_control_deassert(dwc->reset); + if (ret) + return ret; + + ret = clk_bulk_prepare(dwc->num_clks, dwc->clks); + if (ret) + goto assert_reset; + + ret = clk_bulk_enable(dwc->num_clks, dwc->clks); + if (ret) + goto unprepare_clks; + + ret = dwc3_core_init(dwc); + if (ret) + goto disable_clks; + + return 0; + +disable_clks: + clk_bulk_disable(dwc->num_clks, dwc->clks); +unprepare_clks: + clk_bulk_unprepare(dwc->num_clks, dwc->clks); +assert_reset: + reset_control_assert(dwc->reset); + + return ret; +} + static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg) { unsigned long flags; @@ -1438,7 +1522,7 @@ static int dwc3_resume_common(struct dwc3 *dwc, pm_message_t msg) switch (dwc->current_dr_role) { case DWC3_GCTL_PRTCAP_DEVICE: - ret = dwc3_core_init(dwc); + ret = dwc3_core_init_for_resume(dwc); if (ret) return ret; @@ -1449,7 +1533,7 @@ static int dwc3_resume_common(struct dwc3 *dwc, pm_message_t msg) break; case DWC3_GCTL_PRTCAP_HOST: if (!PMSG_IS_AUTO(msg)) { - ret = dwc3_core_init(dwc); + ret = dwc3_core_init_for_resume(dwc); if (ret) return ret; dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_HOST); diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index 4f3b43809917..1765e014aa08 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -891,6 +891,9 @@ struct dwc3_scratchpad_array { * @eps: endpoint array * @gadget: device side representation of the peripheral controller * @gadget_driver: pointer to the gadget driver + * @clks: array of clocks + * @num_clks: number of clocks + * @reset: reset control * @regs: base address for our registers * @regs_size: address space size * @fladj: frame length adjustment @@ -1013,6 +1016,11 @@ struct dwc3 { struct usb_gadget gadget; struct usb_gadget_driver *gadget_driver; + struct clk_bulk_data *clks; + int num_clks; + + struct reset_control *reset; + struct usb_phy *usb2_phy; struct usb_phy *usb3_phy; |