summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--drivers/net/wireless/rtl818x/rtl8180/dev.c58
-rw-r--r--drivers/net/wireless/rtl818x/rtl8180/rtl8180.h7
2 files changed, 49 insertions, 16 deletions
diff --git a/drivers/net/wireless/rtl818x/rtl8180/dev.c b/drivers/net/wireless/rtl818x/rtl8180/dev.c
index 091eb2eb1a3c..767e1048f336 100644
--- a/drivers/net/wireless/rtl818x/rtl8180/dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8180/dev.c
@@ -85,6 +85,30 @@ static const struct ieee80211_channel rtl818x_channels[] = {
{ .center_freq = 2484 },
};
+/* Queues for rtl8180/rtl8185 cards
+ *
+ * name | reg | prio
+ * BC | 7 | 3
+ * HI | 6 | 0
+ * NO | 5 | 1
+ * LO | 4 | 2
+ *
+ * The complete map for DMA kick reg using all queue is:
+ * static const int rtl8180_queues_map[RTL8180_NR_TX_QUEUES] = {6, 5, 4, 7};
+ *
+ * .. but .. Because the mac80211 needs at least 4 queues for QoS or
+ * otherwise QoS can't be done, we use just one.
+ * Beacon queue could be used, but this is not finished yet.
+ * Actual map is:
+ *
+ * name | reg | prio
+ * BC | 7 | 1 <- currently not used yet.
+ * HI | 6 | x <- not used
+ * NO | 5 | x <- not used
+ * LO | 4 | 0 <- used
+ */
+
+static const int rtl8180_queues_map[RTL8180_NR_TX_QUEUES] = {4, 7};
void rtl8180_write_phy(struct ieee80211_hw *dev, u8 addr, u32 data)
{
@@ -235,12 +259,6 @@ static irqreturn_t rtl8180_interrupt(int irq, void *dev_id)
rtl818x_iowrite16(priv, &priv->map->INT_STATUS, reg);
if (reg & (RTL818X_INT_TXB_OK | RTL818X_INT_TXB_ERR))
- rtl8180_handle_tx(dev, 3);
-
- if (reg & (RTL818X_INT_TXH_OK | RTL818X_INT_TXH_ERR))
- rtl8180_handle_tx(dev, 2);
-
- if (reg & (RTL818X_INT_TXN_OK | RTL818X_INT_TXN_ERR))
rtl8180_handle_tx(dev, 1);
if (reg & (RTL818X_INT_TXL_OK | RTL818X_INT_TXL_ERR))
@@ -264,7 +282,7 @@ static void rtl8180_tx(struct ieee80211_hw *dev,
struct rtl8180_tx_ring *ring;
struct rtl8180_tx_desc *entry;
unsigned long flags;
- unsigned int idx, prio;
+ unsigned int idx, prio, hw_prio;
dma_addr_t mapping;
u32 tx_flags;
u8 rc_flags;
@@ -354,7 +372,11 @@ static void rtl8180_tx(struct ieee80211_hw *dev,
spin_unlock_irqrestore(&priv->lock, flags);
- rtl818x_iowrite8(priv, &priv->map->TX_DMA_POLLING, (1 << (prio + 4)));
+ hw_prio = rtl8180_queues_map[prio];
+
+ rtl818x_iowrite8(priv, &priv->map->TX_DMA_POLLING,
+ (1 << hw_prio) | /* ring to poll */
+ (1<<1) | (1<<2));/* stopped rings */
}
void rtl8180_set_anaparam(struct rtl8180_priv *priv, u32 anaparam)
@@ -447,9 +469,7 @@ static int rtl8180_init_hw(struct ieee80211_hw *dev)
rtl8180_set_anaparam(priv, priv->anaparam);
rtl818x_iowrite32(priv, &priv->map->RDSAR, priv->rx_ring_dma);
- rtl818x_iowrite32(priv, &priv->map->TBDA, priv->tx_ring[3].dma);
- rtl818x_iowrite32(priv, &priv->map->THPDA, priv->tx_ring[2].dma);
- rtl818x_iowrite32(priv, &priv->map->TNPDA, priv->tx_ring[1].dma);
+ rtl818x_iowrite32(priv, &priv->map->TBDA, priv->tx_ring[1].dma);
rtl818x_iowrite32(priv, &priv->map->TLPDA, priv->tx_ring[0].dma);
/* TODO: necessary? specs indicate not */
@@ -627,7 +647,7 @@ static int rtl8180_start(struct ieee80211_hw *dev)
if (ret)
return ret;
- for (i = 0; i < 4; i++)
+ for (i = 0; i < (dev->queues + 1); i++)
if ((ret = rtl8180_init_tx_ring(dev, i, 16)))
goto err_free_rings;
@@ -722,7 +742,7 @@ static int rtl8180_start(struct ieee80211_hw *dev)
err_free_rings:
rtl8180_free_rx_ring(dev);
- for (i = 0; i < 4; i++)
+ for (i = 0; i < (dev->queues + 1); i++)
if (priv->tx_ring[i].desc)
rtl8180_free_tx_ring(dev, i);
@@ -752,7 +772,7 @@ static void rtl8180_stop(struct ieee80211_hw *dev)
free_irq(priv->pdev->irq, dev);
rtl8180_free_rx_ring(dev);
- for (i = 0; i < 4; i++)
+ for (i = 0; i < (dev->queues + 1); i++)
rtl8180_free_tx_ring(dev, i);
}
@@ -1215,7 +1235,6 @@ static int rtl8180_probe(struct pci_dev *pdev,
dev->vif_data_size = sizeof(struct rtl8180_vif);
dev->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) |
BIT(NL80211_IFTYPE_ADHOC);
- dev->queues = 1;
dev->max_signal = 65;
reg = rtl818x_ioread32(priv, &priv->map->TX_CONF);
@@ -1246,6 +1265,15 @@ static int rtl8180_probe(struct pci_dev *pdev,
goto err_iounmap;
}
+ /* we declare to MAC80211 all the queues except for beacon queue
+ * that will be eventually handled by DRV.
+ * TX rings are arranged in such a way that lower is the IDX,
+ * higher is the priority, in order to achieve direct mapping
+ * with mac80211, however the beacon queue is an exception and it
+ * is mapped on the highst tx ring IDX.
+ */
+ dev->queues = RTL8180_NR_TX_QUEUES - 1;
+
if (priv->chip_family != RTL818X_CHIP_FAMILY_RTL8180) {
priv->band.n_bitrates = ARRAY_SIZE(rtl818x_rates);
pci_try_set_mwi(pdev);
diff --git a/drivers/net/wireless/rtl818x/rtl8180/rtl8180.h b/drivers/net/wireless/rtl818x/rtl8180/rtl8180.h
index 26383d77fc3a..ad64c5e84857 100644
--- a/drivers/net/wireless/rtl818x/rtl8180/rtl8180.h
+++ b/drivers/net/wireless/rtl818x/rtl8180/rtl8180.h
@@ -24,6 +24,11 @@
#define ANAPARAM_PWR1_SHIFT 20
#define ANAPARAM_PWR1_MASK (0x7F << ANAPARAM_PWR1_SHIFT)
+/* rtl8180/rtl8185 have 3 queue + beacon queue.
+ * mac80211 can use just one, + beacon = 2 tot.
+ */
+#define RTL8180_NR_TX_QUEUES 2
+
struct rtl8180_tx_desc {
__le32 flags;
__le16 rts_duration;
@@ -75,7 +80,7 @@ struct rtl8180_priv {
dma_addr_t rx_ring_dma;
unsigned int rx_idx;
struct sk_buff *rx_buf[32];
- struct rtl8180_tx_ring tx_ring[4];
+ struct rtl8180_tx_ring tx_ring[RTL8180_NR_TX_QUEUES];
struct ieee80211_channel channels[14];
struct ieee80211_rate rates[12];
struct ieee80211_supported_band band;