diff options
-rw-r--r-- | Documentation/devicetree/bindings/sound/adi,adau1977.txt | 61 | ||||
-rw-r--r-- | Documentation/devicetree/bindings/sound/adi,adau1977.yaml | 92 |
2 files changed, 92 insertions, 61 deletions
diff --git a/Documentation/devicetree/bindings/sound/adi,adau1977.txt b/Documentation/devicetree/bindings/sound/adi,adau1977.txt deleted file mode 100644 index 37f8aad01203..000000000000 --- a/Documentation/devicetree/bindings/sound/adi,adau1977.txt +++ /dev/null @@ -1,61 +0,0 @@ -Analog Devices ADAU1977/ADAU1978/ADAU1979 - -Datasheets: -https://www.analog.com/media/en/technical-documentation/data-sheets/ADAU1977.pdf -https://www.analog.com/media/en/technical-documentation/data-sheets/ADAU1978.pdf -https://www.analog.com/media/en/technical-documentation/data-sheets/ADAU1979.pdf - -This driver supports both the I2C and SPI bus. - -Required properties: - - compatible: Should contain one of the following: - "adi,adau1977" - "adi,adau1978" - "adi,adau1979" - - - AVDD-supply: analog power supply for the device, please consult - Documentation/devicetree/bindings/regulator/regulator.txt - -Optional properties: - - reset-gpios: the reset pin for the chip, for more details consult - Documentation/devicetree/bindings/gpio/gpio.txt - - - DVDD-supply: supply voltage for the digital core, please consult - Documentation/devicetree/bindings/regulator/regulator.txt - -- adi,micbias: configures the voltage setting for the MICBIAS pin. - Select 0/1/2/3/4/5/6/7/8 to specify MICBIAS voltage - 5V/5.5V/6V/6.5V/7V/7.5V/8V/8.5V/9V - If not specified the default value will be "7" meaning 8.5 Volts. - This property is only valid for the ADAU1977 - -For required properties on SPI, please consult -Documentation/devicetree/bindings/spi/spi-bus.txt - -Required properties on I2C: - - - reg: The i2c address. Value depends on the state of ADDR0 - and ADDR1, as wired in hardware. - -Examples: - - adau1977_spi: adau1977@0 { - compatible = "adi,adau1977"; - spi-max-frequency = <600000>; - - AVDD-supply = <®ulator>; - DVDD-supply = <®ulator_digital>; - - adi,micbias = <3>; - reset-gpios = <&gpio 10 GPIO_ACTIVE_LOW>; - }; - - adau1977_i2c: adau1977@11 { - compatible = "adi,adau1977"; - reg = <0x11>; - - AVDD-supply = <®ulator>; - DVDD-supply = <®ulator_digital>; - - reset-gpios = <&gpio 10 GPIO_ACTIVE_LOW>; - }; diff --git a/Documentation/devicetree/bindings/sound/adi,adau1977.yaml b/Documentation/devicetree/bindings/sound/adi,adau1977.yaml new file mode 100644 index 000000000000..b80454ad97da --- /dev/null +++ b/Documentation/devicetree/bindings/sound/adi,adau1977.yaml @@ -0,0 +1,92 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/adi,adau1977.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices ADAU1977/ADAU1978/ADAU1979 Quad ADC with Diagnostics + +maintainers: + - Lars-Peter Clausen <lars@metafoo.de> + - Bogdan Togorean <bogdan.togorean@analog.com> + +description: | + Analog Devices ADAU1977 and similar quad ADC with Diagnostics + https://www.analog.com/media/en/technical-documentation/data-sheets/ADAU1977.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/ADAU1978.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/ADAU1979.pdf + +properties: + compatible: + enum: + - adi,adau1977 + - adi,adau1978 + - adi,adau1979 + + reg: + maxItems: 1 + + "#sound-dai-cells": + const: 0 + + reset-gpios: + maxItems: 1 + + spi-max-frequency: true + + AVDD-supply: + description: Analog power support for the device. + + DVDD-supply: + description: Supply voltage for digital core. + + adi,micbias: + description: | + Configures the voltage setting for the MICBIAS pin. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3, 4, 5, 6, 7, 8] + default: 7 + +required: + - reg + - compatible + - AVDD-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + spi { + #address-cells = <1>; + #size-cells = <0>; + adau1977_spi: adau1977@0 { + compatible = "adi,adau1977"; + reg = <0>; + spi-max-frequency = <600000>; + + AVDD-supply = <®ulator>; + DVDD-supply = <®ulator_digital>; + + reset-gpios = <&gpio 10 GPIO_ACTIVE_LOW>; + + adi,micbias = <3>; + }; + }; + - | + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + adau1977_i2c: adau1977@11 { + compatible = "adi,adau1977"; + reg = <0x11>; + + AVDD-supply = <®ulator>; + DVDD-supply = <®ulator_digital>; + + reset-gpios = <&gpio 10 GPIO_ACTIVE_LOW>; + }; + }; |