diff options
| -rw-r--r-- | drivers/extcon/Kconfig | 7 | ||||
| -rw-r--r-- | drivers/extcon/Makefile | 1 | ||||
| -rw-r--r-- | drivers/extcon/extcon-axp288.c | 385 | ||||
| -rw-r--r-- | include/linux/mfd/axp20x.h | 5 |
4 files changed, 398 insertions, 0 deletions
diff --git a/drivers/extcon/Kconfig b/drivers/extcon/Kconfig index bd10b6c6962d..b74e1f27688b 100644 --- a/drivers/extcon/Kconfig +++ b/drivers/extcon/Kconfig @@ -28,6 +28,13 @@ config EXTCON_ARIZONA with Wolfson Arizona devices. These are audio CODECs with advanced audio accessory detection support. +config EXTCON_AXP288 + tristate "X-Power AXP288 EXTCON support" + depends on MFD_AXP20X && USB_PHY + help + Say Y here to enable support for USB peripheral detection + and USB MUX switching by X-Power AXP288 PMIC. + config EXTCON_GPIO tristate "GPIO extcon support" depends on GPIOLIB diff --git a/drivers/extcon/Makefile b/drivers/extcon/Makefile index 9204114791a3..ba787d04295b 100644 --- a/drivers/extcon/Makefile +++ b/drivers/extcon/Makefile @@ -5,6 +5,7 @@ obj-$(CONFIG_EXTCON) += extcon.o obj-$(CONFIG_EXTCON_ADC_JACK) += extcon-adc-jack.o obj-$(CONFIG_EXTCON_ARIZONA) += extcon-arizona.o +obj-$(CONFIG_EXTCON_AXP288) += extcon-axp288.o obj-$(CONFIG_EXTCON_GPIO) += extcon-gpio.o obj-$(CONFIG_EXTCON_MAX14577) += extcon-max14577.o obj-$(CONFIG_EXTCON_MAX77693) += extcon-max77693.o diff --git a/drivers/extcon/extcon-axp288.c b/drivers/extcon/extcon-axp288.c new file mode 100644 index 000000000000..8299adb9b676 --- /dev/null +++ b/drivers/extcon/extcon-axp288.c @@ -0,0 +1,385 @@ +/* + * extcon-axp288.c - X-Power AXP288 PMIC extcon cable detection driver + * + * Copyright (C) 2015 Intel Corporation + * Author: Ramakrishna Pallala <ramakrishna.pallala@intel.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/io.h> +#include <linux/slab.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/property.h> +#include <linux/usb/phy.h> +#include <linux/notifier.h> +#include <linux/extcon.h> +#include <linux/regmap.h> +#include <linux/gpio.h> +#include <linux/gpio/consumer.h> +#include <linux/mfd/axp20x.h> + +/* Power source status register */ +#define PS_STAT_VBUS_TRIGGER BIT(0) +#define PS_STAT_BAT_CHRG_DIR BIT(2) +#define PS_STAT_VBUS_ABOVE_VHOLD BIT(3) +#define PS_STAT_VBUS_VALID BIT(4) +#define PS_STAT_VBUS_PRESENT BIT(5) + +/* BC module global register */ +#define BC_GLOBAL_RUN BIT(0) +#define BC_GLOBAL_DET_STAT BIT(2) +#define BC_GLOBAL_DBP_TOUT BIT(3) +#define BC_GLOBAL_VLGC_COM_SEL BIT(4) +#define BC_GLOBAL_DCD_TOUT_MASK (BIT(6)|BIT(5)) +#define BC_GLOBAL_DCD_TOUT_300MS 0 +#define BC_GLOBAL_DCD_TOUT_100MS 1 +#define BC_GLOBAL_DCD_TOUT_500MS 2 +#define BC_GLOBAL_DCD_TOUT_900MS 3 +#define BC_GLOBAL_DCD_DET_SEL BIT(7) + +/* BC module vbus control and status register */ +#define VBUS_CNTL_DPDM_PD_EN BIT(4) +#define VBUS_CNTL_DPDM_FD_EN BIT(5) +#define VBUS_CNTL_FIRST_PO_STAT BIT(6) + +/* BC USB status register */ +#define USB_STAT_BUS_STAT_MASK (BIT(3)|BIT(2)|BIT(1)|BIT(0)) +#define USB_STAT_BUS_STAT_SHIFT 0 +#define USB_STAT_BUS_STAT_ATHD 0 +#define USB_STAT_BUS_STAT_CONN 1 +#define USB_STAT_BUS_STAT_SUSP 2 +#define USB_STAT_BUS_STAT_CONF 3 +#define USB_STAT_USB_SS_MODE BIT(4) +#define USB_STAT_DEAD_BAT_DET BIT(6) +#define USB_STAT_DBP_UNCFG BIT(7) + +/* BC detect status register */ +#define DET_STAT_MASK (BIT(7)|BIT(6)|BIT(5)) +#define DET_STAT_SHIFT 5 +#define DET_STAT_SDP 1 +#define DET_STAT_CDP 2 +#define DET_STAT_DCP 3 + +/* IRQ enable-1 register */ +#define PWRSRC_IRQ_CFG_MASK (BIT(4)|BIT(3)|BIT(2)) + +/* IRQ enable-6 register */ +#define BC12_IRQ_CFG_MASK BIT(1) + +#define AXP288_EXTCON_SLOW_CHARGER "SLOW-CHARGER" +#define AXP288_EXTCON_DOWNSTREAM_CHARGER "CHARGE-DOWNSTREAM" +#define AXP288_EXTCON_FAST_CHARGER "FAST-CHARGER" + +enum axp288_extcon_reg { + AXP288_PS_STAT_REG = 0x00, + AXP288_PS_BOOT_REASON_REG = 0x02, + AXP288_BC_GLOBAL_REG = 0x2c, + AXP288_BC_VBUS_CNTL_REG = 0x2d, + AXP288_BC_USB_STAT_REG = 0x2e, + AXP288_BC_DET_STAT_REG = 0x2f, + AXP288_PWRSRC_IRQ_CFG_REG = 0x40, + AXP288_BC12_IRQ_CFG_REG = 0x45, +}; + +enum axp288_mux_select { + EXTCON_GPIO_MUX_SEL_PMIC = 0, + EXTCON_GPIO_MUX_SEL_SOC, +}; + +enum axp288_extcon_irq { + VBUS_FALLING_IRQ = 0, + VBUS_RISING_IRQ, + MV_CHNG_IRQ, + BC_USB_CHNG_IRQ, + EXTCON_IRQ_END, +}; + +static const char *axp288_extcon_cables[] = { + AXP288_EXTCON_SLOW_CHARGER, + AXP288_EXTCON_DOWNSTREAM_CHARGER, + AXP288_EXTCON_FAST_CHARGER, + NULL, +}; + +struct axp288_extcon_info { + struct device *dev; + struct regmap *regmap; + struct regmap_irq_chip_data *regmap_irqc; + struct axp288_extcon_pdata *pdata; + int irq[EXTCON_IRQ_END]; + struct extcon_dev *edev; + struct notifier_block extcon_nb; + struct usb_phy *otg; +}; + +/* Power up/down reason string array */ +static char *axp288_pwr_up_down_info[] = { + "Last wake caused by user pressing the power button", + "Last wake caused by a charger insertion", + "Last wake caused by a battery insertion", + "Last wake caused by SOC initiated global reset", + "Last wake caused by cold reset", + "Last shutdown caused by PMIC UVLO threshold", + "Last shutdown caused by SOC initiated cold off", + "Last shutdown caused by user pressing the power button", + NULL, +}; + +/* + * Decode and log the given "reset source indicator" (rsi) + * register and then clear it. + */ +static void axp288_extcon_log_rsi(struct axp288_extcon_info *info) +{ + char **rsi; + unsigned int val, i, clear_mask = 0; + int ret; + + ret = regmap_read(info->regmap, AXP288_PS_BOOT_REASON_REG, &val); + for (i = 0, rsi = axp288_pwr_up_down_info; *rsi; rsi++, i++) { + if (val & BIT(i)) { + dev_dbg(info->dev, "%s\n", *rsi); + clear_mask |= BIT(i); + } + } + + /* Clear the register value for next reboot (write 1 to clear bit) */ + regmap_write(info->regmap, AXP288_PS_BOOT_REASON_REG, clear_mask); +} + +static int axp288_handle_chrg_det_event(struct axp288_extcon_info *info) +{ + static bool notify_otg, notify_charger; + static char *cable; + int ret, stat, cfg, pwr_stat; + u8 chrg_type; + bool vbus_attach = false; + + ret = regmap_read(info->regmap, AXP288_PS_STAT_REG, &pwr_stat); + if (ret < 0) { + dev_err(info->dev, "failed to read vbus status\n"); + return ret; + } + + vbus_attach = (pwr_stat & PS_STAT_VBUS_PRESENT); + if (!vbus_attach) + goto notify_otg; + + /* Check charger detection completion status */ + ret = regmap_read(info->regmap, AXP288_BC_GLOBAL_REG, &cfg); + if (ret < 0) + goto dev_det_ret; + if (cfg & BC_GLOBAL_DET_STAT) { + dev_dbg(info->dev, "can't complete the charger detection\n"); + goto dev_det_ret; + } + + ret = regmap_read(info->regmap, AXP288_BC_DET_STAT_REG, &stat); + if (ret < 0) + goto dev_det_ret; + + chrg_type = (stat & DET_STAT_MASK) >> DET_STAT_SHIFT; + + switch (chrg_type) { + case DET_STAT_SDP: + dev_dbg(info->dev, "sdp cable is connecetd\n"); + notify_otg = true; + notify_charger = true; + cable = AXP288_EXTCON_SLOW_CHARGER; + break; + case DET_STAT_CDP: + dev_dbg(info->dev, "cdp cable is connecetd\n"); + notify_otg = true; + notify_charger = true; + cable = AXP288_EXTCON_DOWNSTREAM_CHARGER; + break; + case DET_STAT_DCP: + dev_dbg(info->dev, "dcp cable is connecetd\n"); + notify_charger = true; + cable = AXP288_EXTCON_FAST_CHARGER; + break; + default: + dev_warn(info->dev, + "disconnect or unknown or ID event\n"); + } + +notify_otg: + if (notify_otg) { + /* + * If VBUS is absent Connect D+/D- lines to PMIC for BC + * detection. Else connect them to SOC for USB communication. + */ + if (info->pdata->gpio_mux_cntl) + gpiod_set_value(info->pdata->gpio_mux_cntl, + vbus_attach ? EXTCON_GPIO_MUX_SEL_SOC + : EXTCON_GPIO_MUX_SEL_PMIC); + + atomic_notifier_call_chain(&info->otg->notifier, + vbus_attach ? USB_EVENT_VBUS : USB_EVENT_NONE, NULL); + } + + if (notify_charger) + extcon_set_cable_state(info->edev, cable, vbus_attach); + + /* Clear the flags on disconnect event */ + if (!vbus_attach) + notify_otg = notify_charger = false; + + return 0; + +dev_det_ret: + if (ret < 0) + dev_err(info->dev, "failed to detect BC Mod\n"); + + return ret; +} + +static irqreturn_t axp288_extcon_isr(int irq, void *data) +{ + struct axp288_extcon_info *info = data; + int ret; + + ret = axp288_handle_chrg_det_event(info); + if (ret < 0) + dev_err(info->dev, "failed to handle the interrupt\n"); + + return IRQ_HANDLED; +} + +static void axp288_extcon_enable_irq(struct axp288_extcon_info *info) +{ + /* Unmask VBUS interrupt */ + regmap_write(info->regmap, AXP288_PWRSRC_IRQ_CFG_REG, + PWRSRC_IRQ_CFG_MASK); + regmap_update_bits(info->regmap, AXP288_BC_GLOBAL_REG, + BC_GLOBAL_RUN, 0); + /* Unmask the BC1.2 complete interrupts */ + regmap_write(info->regmap, AXP288_BC12_IRQ_CFG_REG, BC12_IRQ_CFG_MASK); + /* Enable the charger detection logic */ + regmap_update_bits(info->regmap, AXP288_BC_GLOBAL_REG, + BC_GLOBAL_RUN, BC_GLOBAL_RUN); +} + +static int axp288_extcon_probe(struct platform_device *pdev) +{ + struct axp288_extcon_info *info; + struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent); + int ret, i, pirq, gpio; + + info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL); + if (!info) + return -ENOMEM; + + info->dev = &pdev->dev; + info->regmap = axp20x->regmap; + info->regmap_irqc = axp20x->regmap_irqc; + info->pdata = pdev->dev.platform_data; + + if (!info->pdata) { + /* Try ACPI provided pdata via device properties */ + if (!device_property_present(&pdev->dev, + "axp288_extcon_data\n")) + dev_err(&pdev->dev, "failed to get platform data\n"); + return -ENODEV; + } + platform_set_drvdata(pdev, info); + + axp288_extcon_log_rsi(info); + + /* Initialize extcon device */ + info->edev = devm_extcon_dev_allocate(&pdev->dev, + axp288_extcon_cables); + if (IS_ERR(info->edev)) { + dev_err(&pdev->dev, "failed to allocate memory for extcon\n"); + return PTR_ERR(info->edev); + } + + /* Register extcon device */ + ret = devm_extcon_dev_register(&pdev->dev, info->edev); + if (ret) { + dev_err(&pdev->dev, "failed to register extcon device\n"); + return ret; + } + + /* Get otg transceiver phy */ + info->otg = usb_get_phy(USB_PHY_TYPE_USB2); + if (IS_ERR(info->otg)) { + dev_err(&pdev->dev, "failed to get otg transceiver\n"); + return PTR_ERR(info->otg); + } + + /* Set up gpio control for USB Mux */ + if (info->pdata->gpio_mux_cntl) { + gpio = desc_to_gpio(info->pdata->gpio_mux_cntl); + ret = gpio_request(gpio, "USB_MUX"); + if (ret < 0) { + dev_err(&pdev->dev, + "failed to request the gpio=%d\n", gpio); + goto gpio_req_failed; + } + gpiod_direction_output(info->pdata->gpio_mux_cntl, + EXTCON_GPIO_MUX_SEL_PMIC); + } + + for (i = 0; i < EXTCON_IRQ_END; i++) { + pirq = platform_get_irq(pdev, i); + info->irq[i] = regmap_irq_get_virq(info->regmap_irqc, pirq); + if (info->irq[i] < 0) { + dev_err(&pdev->dev, + "failed to get virtual interrupt=%d\n", pirq); + ret = info->irq[i]; + goto gpio_req_failed; + } + + ret = devm_request_threaded_irq(&pdev->dev, info->irq[i], + NULL, axp288_extcon_isr, + IRQF_ONESHOT | IRQF_NO_SUSPEND, + pdev->name, info); + if (ret) { + dev_err(&pdev->dev, "failed to request interrupt=%d\n", + info->irq[i]); + goto gpio_req_failed; + } + } + + /* Enable interrupts */ + axp288_extcon_enable_irq(info); + + return 0; + +gpio_req_failed: + usb_put_phy(info->otg); + return ret; +} + +static int axp288_extcon_remove(struct platform_device *pdev) +{ + struct axp288_extcon_info *info = platform_get_drvdata(pdev); + + usb_put_phy(info->otg); + return 0; +} + +static struct platform_driver axp288_extcon_driver = { + .probe = axp288_extcon_probe, + .remove = axp288_extcon_remove, + .driver = { + .name = "axp288_extcon", + }, +}; +module_platform_driver(axp288_extcon_driver); + +MODULE_AUTHOR("Ramakrishna Pallala <ramakrishna.pallala@intel.com>"); +MODULE_DESCRIPTION("X-Powers AXP288 extcon driver"); +MODULE_LICENSE("GPL v2"); diff --git a/include/linux/mfd/axp20x.h b/include/linux/mfd/axp20x.h index dfabd6db7ddf..4ed8071d062e 100644 --- a/include/linux/mfd/axp20x.h +++ b/include/linux/mfd/axp20x.h @@ -275,4 +275,9 @@ struct axp20x_fg_pdata { int thermistor_curve[MAX_THERM_CURVE_SIZE][2]; }; +struct axp288_extcon_pdata { + /* GPIO pin control to switch D+/D- lines b/w PMIC and SOC */ + struct gpio_desc *gpio_mux_cntl; +}; + #endif /* __LINUX_MFD_AXP20X_H */ |