diff options
-rw-r--r-- | arch/arm/boot/dts/gemini-dlink-dir-685.dts | 50 | ||||
-rw-r--r-- | arch/arm/boot/dts/gemini-dlink-dns-313.dts | 2 | ||||
-rw-r--r-- | arch/arm/boot/dts/gemini-nas4220b.dts | 4 | ||||
-rw-r--r-- | arch/arm/boot/dts/gemini-sl93512r.dts | 4 | ||||
-rw-r--r-- | arch/arm/boot/dts/gemini-sq201.dts | 2 | ||||
-rw-r--r-- | arch/arm/boot/dts/gemini.dtsi | 8 |
6 files changed, 58 insertions, 12 deletions
diff --git a/arch/arm/boot/dts/gemini-dlink-dir-685.dts b/arch/arm/boot/dts/gemini-dlink-dir-685.dts index e2030ba16512..cc39289e99dd 100644 --- a/arch/arm/boot/dts/gemini-dlink-dir-685.dts +++ b/arch/arm/boot/dts/gemini-dlink-dir-685.dts @@ -119,13 +119,11 @@ /* * This is a Sunon Maglev GM0502PFV2-8 cooling fan @10000 RPM. - * Since the platform has no temperature sensor, this is controlled - * from userspace by using the hard disks S.M.A.R.T. temperature * sensor. It is turned on when the temperature exceeds 46 degrees * and turned off when the temperatures goes below 41 degrees * (celsius). */ - gpio-fan { + fan0: gpio-fan { compatible = "gpio-fan"; /* Collides with IDE */ gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; @@ -133,6 +131,40 @@ #cooling-cells = <2>; }; + thermal-zones { + chassis-thermal { + /* Poll every 20 seconds */ + polling-delay = <20000>; + /* Poll every 2nd second when cooling */ + polling-delay-passive = <2000>; + /* Use the thermal sensor in the hard drive */ + thermal-sensors = <&drive0>; + + /* Tripping points from the fan.script in the rootfs */ + trips { + alert: chassis-alert { + /* At 43 degrees turn on the fan */ + temperature = <43000>; + hysteresis = <3000>; + type = "active"; + }; + crit: chassis-crit { + /* Just shut down at 60 degrees */ + temperature = <60000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&alert>; + cooling-device = <&fan0 1 1>; + }; + }; + }; + }; + /* * The touchpad input is connected to a GPIO bit-banged * I2C bus. @@ -443,8 +475,18 @@ }; }; - ata@63000000 { + ide@63000000 { status = "okay"; + + /* + * This drive may have a temperature sensor with a + * thermal zone we can use for thermal control of the + * chassis temperature using the fan. + */ + drive0: ide-port@0 { + reg = <0>; + #thermal-sensor-cells = <0>; + }; }; display-controller@6a000000 { diff --git a/arch/arm/boot/dts/gemini-dlink-dns-313.dts b/arch/arm/boot/dts/gemini-dlink-dns-313.dts index 360642a02a48..c6f3d90e3e90 100644 --- a/arch/arm/boot/dts/gemini-dlink-dns-313.dts +++ b/arch/arm/boot/dts/gemini-dlink-dns-313.dts @@ -297,7 +297,7 @@ }; }; - ata@63000000 { + ide@63000000 { status = "okay"; }; }; diff --git a/arch/arm/boot/dts/gemini-nas4220b.dts b/arch/arm/boot/dts/gemini-nas4220b.dts index 521714f38eed..43c45f7e1e0a 100644 --- a/arch/arm/boot/dts/gemini-nas4220b.dts +++ b/arch/arm/boot/dts/gemini-nas4220b.dts @@ -170,11 +170,11 @@ }; }; - ata@63000000 { + ide@63000000 { status = "okay"; }; - ata@63400000 { + ide@63400000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/gemini-sl93512r.dts b/arch/arm/boot/dts/gemini-sl93512r.dts index a98af0351906..a0916d3c1059 100644 --- a/arch/arm/boot/dts/gemini-sl93512r.dts +++ b/arch/arm/boot/dts/gemini-sl93512r.dts @@ -293,11 +293,11 @@ }; }; - ata@63000000 { + ide@63000000 { status = "okay"; }; - ata@63400000 { + ide@63400000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/gemini-sq201.dts b/arch/arm/boot/dts/gemini-sq201.dts index 239dfacaae4d..0c6e6d35bfaa 100644 --- a/arch/arm/boot/dts/gemini-sq201.dts +++ b/arch/arm/boot/dts/gemini-sq201.dts @@ -289,7 +289,7 @@ }; }; - ata@63000000 { + ide@63000000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/gemini.dtsi b/arch/arm/boot/dts/gemini.dtsi index 8cf67b11751f..065ed10a79fa 100644 --- a/arch/arm/boot/dts/gemini.dtsi +++ b/arch/arm/boot/dts/gemini.dtsi @@ -356,7 +356,7 @@ }; }; - ata@63000000 { + ide@63000000 { compatible = "cortina,gemini-pata", "faraday,ftide010"; reg = <0x63000000 0x1000>; interrupts = <4 IRQ_TYPE_EDGE_RISING>; @@ -365,9 +365,11 @@ clock-names = "PCLK"; sata = <&sata>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; - ata@63400000 { + ide@63400000 { compatible = "cortina,gemini-pata", "faraday,ftide010"; reg = <0x63400000 0x1000>; interrupts = <5 IRQ_TYPE_EDGE_RISING>; @@ -376,6 +378,8 @@ clock-names = "PCLK"; sata = <&sata>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; dma-controller@67000000 { |