diff options
| -rw-r--r-- | MAINTAINERS | 1 | ||||
| -rw-r--r-- | include/linux/platform_data/dsa.h | 68 | ||||
| -rw-r--r-- | include/net/dsa.h | 61 |
3 files changed, 70 insertions, 60 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index 4d04cebb4a71..a592b9992b46 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -10576,6 +10576,7 @@ F: Documentation/devicetree/bindings/net/dsa/ F: net/dsa/ F: include/net/dsa.h F: include/linux/dsa/ +F: include/linux/platform_data/dsa.h F: drivers/net/dsa/ NETWORKING [GENERAL] diff --git a/include/linux/platform_data/dsa.h b/include/linux/platform_data/dsa.h new file mode 100644 index 000000000000..d4d9bf2060a6 --- /dev/null +++ b/include/linux/platform_data/dsa.h @@ -0,0 +1,68 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __DSA_PDATA_H +#define __DSA_PDATA_H + +struct device; +struct net_device; + +#define DSA_MAX_SWITCHES 4 +#define DSA_MAX_PORTS 12 +#define DSA_RTABLE_NONE -1 + +struct dsa_chip_data { + /* + * How to access the switch configuration registers. + */ + struct device *host_dev; + int sw_addr; + + /* + * Reference to network devices + */ + struct device *netdev[DSA_MAX_PORTS]; + + /* set to size of eeprom if supported by the switch */ + int eeprom_len; + + /* Device tree node pointer for this specific switch chip + * used during switch setup in case additional properties + * and resources needs to be used + */ + struct device_node *of_node; + + /* + * The names of the switch's ports. Use "cpu" to + * designate the switch port that the cpu is connected to, + * "dsa" to indicate that this port is a DSA link to + * another switch, NULL to indicate the port is unused, + * or any other string to indicate this is a physical port. + */ + char *port_names[DSA_MAX_PORTS]; + struct device_node *port_dn[DSA_MAX_PORTS]; + + /* + * An array of which element [a] indicates which port on this + * switch should be used to send packets to that are destined + * for switch a. Can be NULL if there is only one switch chip. + */ + s8 rtable[DSA_MAX_SWITCHES]; +}; + +struct dsa_platform_data { + /* + * Reference to a Linux network interface that connects + * to the root switch chip of the tree. + */ + struct device *netdev; + struct net_device *of_netdev; + + /* + * Info structs describing each of the switch chips + * connected via this network interface. + */ + int nr_chips; + struct dsa_chip_data *chip; +}; + + +#endif /* __DSA_PDATA_H */ diff --git a/include/net/dsa.h b/include/net/dsa.h index 2f1daf29131a..7f2a668ef2cc 100644 --- a/include/net/dsa.h +++ b/include/net/dsa.h @@ -21,6 +21,7 @@ #include <linux/ethtool.h> #include <linux/net_tstamp.h> #include <linux/phy.h> +#include <linux/platform_data/dsa.h> #include <net/devlink.h> #include <net/switchdev.h> @@ -44,66 +45,6 @@ enum dsa_tag_protocol { DSA_TAG_LAST, /* MUST BE LAST */ }; -#define DSA_MAX_SWITCHES 4 -#define DSA_MAX_PORTS 12 - -#define DSA_RTABLE_NONE -1 - -struct dsa_chip_data { - /* - * How to access the switch configuration registers. - */ - struct device *host_dev; - int sw_addr; - - /* - * Reference to network devices - */ - struct device *netdev[DSA_MAX_PORTS]; - - /* set to size of eeprom if supported by the switch */ - int eeprom_len; - - /* Device tree node pointer for this specific switch chip - * used during switch setup in case additional properties - * and resources needs to be used - */ - struct device_node *of_node; - - /* - * The names of the switch's ports. Use "cpu" to - * designate the switch port that the cpu is connected to, - * "dsa" to indicate that this port is a DSA link to - * another switch, NULL to indicate the port is unused, - * or any other string to indicate this is a physical port. - */ - char *port_names[DSA_MAX_PORTS]; - struct device_node *port_dn[DSA_MAX_PORTS]; - - /* - * An array of which element [a] indicates which port on this - * switch should be used to send packets to that are destined - * for switch a. Can be NULL if there is only one switch chip. - */ - s8 rtable[DSA_MAX_SWITCHES]; -}; - -struct dsa_platform_data { - /* - * Reference to a Linux network interface that connects - * to the root switch chip of the tree. - */ - struct device *netdev; - struct net_device *of_netdev; - - /* - * Info structs describing each of the switch chips - * connected via this network interface. - */ - int nr_chips; - struct dsa_chip_data *chip; -}; - struct packet_type; struct dsa_switch; |