summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--arch/arm/configs/u8500_defconfig4
-rw-r--r--arch/arm/mach-ux500/Kconfig26
-rw-r--r--arch/arm/mach-ux500/Makefile5
-rw-r--r--arch/arm/mach-ux500/clock.c14
-rw-r--r--arch/arm/mach-ux500/cpu-db5500.c18
-rw-r--r--arch/arm/mach-ux500/cpu-db8500.c105
-rw-r--r--arch/arm/mach-ux500/cpu.c78
-rw-r--r--arch/arm/mach-ux500/id.c107
-rw-r--r--arch/arm/mach-ux500/include/mach/debug-macro.S19
-rw-r--r--arch/arm/mach-ux500/include/mach/entry-macro.S5
-rw-r--r--arch/arm/mach-ux500/include/mach/hardware.h108
-rw-r--r--arch/arm/mach-ux500/include/mach/id.h80
-rw-r--r--arch/arm/mach-ux500/include/mach/irqs.h2
-rw-r--r--arch/arm/mach-ux500/include/mach/setup.h2
-rw-r--r--arch/arm/mach-ux500/modem-irq-db5500.c5
-rw-r--r--arch/arm/mach-ux500/platsmp.c37
16 files changed, 354 insertions, 261 deletions
diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig
index be80f037f85a..52d86c4485bf 100644
--- a/arch/arm/configs/u8500_defconfig
+++ b/arch/arm/configs/u8500_defconfig
@@ -9,6 +9,10 @@ CONFIG_MODULE_UNLOAD=y
# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
CONFIG_ARCH_U8500=y
+CONFIG_UX500_SOC_DB5500=y
+CONFIG_UX500_SOC_DB8500=y
+CONFIG_MACH_U8500=y
+CONFIG_MACH_U5500=y
CONFIG_SMP=y
CONFIG_NR_CPUS=2
CONFIG_PREEMPT=y
diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig
index 2dd44a0b4615..247caa3400d0 100644
--- a/arch/arm/mach-ux500/Kconfig
+++ b/arch/arm/mach-ux500/Kconfig
@@ -7,28 +7,30 @@ config UX500_SOC_COMMON
select HAS_MTU
select NOMADIK_GPIO
-config UX500_SOC_DB8500
- bool
+menu "Ux500 SoC"
config UX500_SOC_DB5500
- bool
+ bool "DB5500"
+
+config UX500_SOC_DB8500
+ bool "DB8500"
+
+endmenu
-choice
- prompt "Ux500 target platform"
- default MACH_U8500_MOP
+menu "Ux500 target platform"
-config MACH_U8500_MOP
+config MACH_U8500
bool "U8500 Development platform"
- select UX500_SOC_DB8500
+ depends on UX500_SOC_DB8500
help
Include support for the mop500 development platform.
config MACH_U5500
bool "U5500 Development platform"
- select UX500_SOC_DB5500
+ depends on UX500_SOC_DB5500
help
Include support for the U5500 development platform.
-endchoice
+endmenu
config UX500_DEBUG_UART
int "Ux500 UART to use for low-level debug"
@@ -39,14 +41,14 @@ config UX500_DEBUG_UART
config U5500_MODEM_IRQ
bool "Modem IRQ support"
- depends on MACH_U5500
+ depends on UX500_SOC_DB5500
default y
help
Add support for handling IRQ:s from modem side
config U5500_MBOX
bool "Mailbox support"
- depends on MACH_U5500 && U5500_MODEM_IRQ
+ depends on U5500_MODEM_IRQ
default y
help
Add support for U5500 mailbox communication with modem side
diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile
index 12052e8e064c..53ebb429e971 100644
--- a/arch/arm/mach-ux500/Makefile
+++ b/arch/arm/mach-ux500/Makefile
@@ -2,10 +2,11 @@
# Makefile for the linux kernel, U8500 machine.
#
-obj-y := clock.o cpu.o devices.o devices-common.o
+obj-y := clock.o cpu.o devices.o devices-common.o \
+ id.o
obj-$(CONFIG_UX500_SOC_DB5500) += cpu-db5500.o dma-db5500.o
obj-$(CONFIG_UX500_SOC_DB8500) += cpu-db8500.o devices-db8500.o prcmu.o
-obj-$(CONFIG_MACH_U8500_MOP) += board-mop500.o board-mop500-sdi.o \
+obj-$(CONFIG_MACH_U8500) += board-mop500.o board-mop500-sdi.o \
board-mop500-keypads.o
obj-$(CONFIG_MACH_U5500) += board-u5500.o board-u5500-sdi.o
obj-$(CONFIG_SMP) += platsmp.o headsmp.o
diff --git a/arch/arm/mach-ux500/clock.c b/arch/arm/mach-ux500/clock.c
index ccff2dae167f..b2b0a3b9be8f 100644
--- a/arch/arm/mach-ux500/clock.c
+++ b/arch/arm/mach-ux500/clock.c
@@ -136,8 +136,7 @@ EXPORT_SYMBOL(clk_disable);
*/
static unsigned long clk_mtu_get_rate(struct clk *clk)
{
- void __iomem *addr = __io_address(UX500_PRCMU_BASE)
- + PRCM_TCR;
+ void __iomem *addr;
u32 tcr;
int mtu = (int) clk->data;
/*
@@ -149,13 +148,20 @@ static unsigned long clk_mtu_get_rate(struct clk *clk)
unsigned long mturate;
unsigned long retclk;
+ if (cpu_is_u5500())
+ addr = __io_address(U5500_PRCMU_BASE);
+ else if (cpu_is_u8500())
+ addr = __io_address(U8500_PRCMU_BASE);
+ else
+ ux500_unknown_soc();
+
/*
* On a startup, always conifgure the TCR to the doze mode;
* bootloaders do it for us. Do this in the kernel too.
*/
- writel(PRCM_TCR_DOZE_MODE, addr);
+ writel(PRCM_TCR_DOZE_MODE, addr + PRCM_TCR);
- tcr = readl(addr);
+ tcr = readl(addr + PRCM_TCR);
/* Get the rate from the parent as a default */
if (clk->parent_periph)
diff --git a/arch/arm/mach-ux500/cpu-db5500.c b/arch/arm/mach-ux500/cpu-db5500.c
index acc841e48de4..af04e0891a78 100644
--- a/arch/arm/mach-ux500/cpu-db5500.c
+++ b/arch/arm/mach-ux500/cpu-db5500.c
@@ -21,7 +21,20 @@
#include "devices-db5500.h"
+static struct map_desc u5500_uart_io_desc[] __initdata = {
+ __IO_DEV_DESC(U5500_UART0_BASE, SZ_4K),
+ __IO_DEV_DESC(U5500_UART2_BASE, SZ_4K),
+};
+
static struct map_desc u5500_io_desc[] __initdata = {
+ __IO_DEV_DESC(U5500_GIC_CPU_BASE, SZ_4K),
+ __IO_DEV_DESC(U5500_GIC_DIST_BASE, SZ_4K),
+ __IO_DEV_DESC(U5500_L2CC_BASE, SZ_4K),
+ __IO_DEV_DESC(U5500_TWD_BASE, SZ_4K),
+ __IO_DEV_DESC(U5500_MTU0_BASE, SZ_4K),
+ __IO_DEV_DESC(U5500_SCU_BASE, SZ_4K),
+ __IO_DEV_DESC(U5500_BACKUPRAM0_BASE, SZ_8K),
+
__IO_DEV_DESC(U5500_GPIO0_BASE, SZ_4K),
__IO_DEV_DESC(U5500_GPIO1_BASE, SZ_4K),
__IO_DEV_DESC(U5500_GPIO2_BASE, SZ_4K),
@@ -143,6 +156,11 @@ static void __init db5500_add_gpios(void)
void __init u5500_map_io(void)
{
+ /*
+ * Map the UARTs early so that the DEBUG_LL stuff continues to work.
+ */
+ iotable_init(u5500_uart_io_desc, ARRAY_SIZE(u5500_uart_io_desc));
+
ux500_map_io();
iotable_init(u5500_io_desc, ARRAY_SIZE(u5500_io_desc));
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index c0f34a404c53..1748fbc58530 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -29,13 +29,31 @@ static struct platform_device *platform_devs[] __initdata = {
};
/* minimum static i/o mapping required to boot U8500 platforms */
+static struct map_desc u8500_uart_io_desc[] __initdata = {
+ __IO_DEV_DESC(U8500_UART0_BASE, SZ_4K),
+ __IO_DEV_DESC(U8500_UART2_BASE, SZ_4K),
+};
+
static struct map_desc u8500_io_desc[] __initdata = {
+ __IO_DEV_DESC(U8500_GIC_CPU_BASE, SZ_4K),
+ __IO_DEV_DESC(U8500_GIC_DIST_BASE, SZ_4K),
+ __IO_DEV_DESC(U8500_L2CC_BASE, SZ_4K),
+ __IO_DEV_DESC(U8500_TWD_BASE, SZ_4K),
+ __IO_DEV_DESC(U8500_MTU0_BASE, SZ_4K),
+ __IO_DEV_DESC(U8500_SCU_BASE, SZ_4K),
+ __IO_DEV_DESC(U8500_BACKUPRAM0_BASE, SZ_8K),
+
+ __IO_DEV_DESC(U8500_CLKRST1_BASE, SZ_4K),
+ __IO_DEV_DESC(U8500_CLKRST2_BASE, SZ_4K),
+ __IO_DEV_DESC(U8500_CLKRST3_BASE, SZ_4K),
+ __IO_DEV_DESC(U8500_CLKRST5_BASE, SZ_4K),
+ __IO_DEV_DESC(U8500_CLKRST6_BASE, SZ_4K),
+
__IO_DEV_DESC(U8500_PRCMU_BASE, SZ_4K),
__IO_DEV_DESC(U8500_GPIO0_BASE, SZ_4K),
__IO_DEV_DESC(U8500_GPIO1_BASE, SZ_4K),
__IO_DEV_DESC(U8500_GPIO2_BASE, SZ_4K),
__IO_DEV_DESC(U8500_GPIO3_BASE, SZ_4K),
- __MEM_DEV_DESC(U8500_BOOT_ROM_BASE, SZ_1M),
};
static struct map_desc u8500_ed_io_desc[] __initdata = {
@@ -52,71 +70,13 @@ static struct map_desc u8500_v2_io_desc[] __initdata = {
__IO_DEV_DESC(U8500_PRCMU_TCDM_BASE, SZ_4K),
};
-/*
- * Functions to differentiate between later ASICs
- * We look into the end of the ROM to locate the hardcoded ASIC ID.
- * This is only needed to differentiate between minor revisions and
- * process variants of an ASIC, the major revisions are encoded in
- * the cpuid.
- */
-#define U8500_ASIC_ID_LOC_ED_V1 (U8500_BOOT_ROM_BASE + 0x1FFF4)
-#define U8500_ASIC_ID_LOC_V2 (U8500_BOOT_ROM_BASE + 0x1DBF4)
-#define U8500_ASIC_REV_ED 0x01
-#define U8500_ASIC_REV_V10 0xA0
-#define U8500_ASIC_REV_V11 0xA1
-#define U8500_ASIC_REV_V20 0xB0
-
-/**
- * struct db8500_asic_id - fields of the ASIC ID
- * @process: the manufacturing process, 0x40 is 40 nm
- * 0x00 is "standard"
- * @partnumber: hithereto 0x8500 for DB8500
- * @revision: version code in the series
- * This field definion is not formally defined but makes
- * sense.
- */
-struct db8500_asic_id {
- u8 process;
- u16 partnumber;
- u8 revision;
-};
-
-/* This isn't going to change at runtime */
-static struct db8500_asic_id db8500_id;
-
-static void __init get_db8500_asic_id(void)
-{
- u32 asicid;
-
- if (cpu_is_u8500v1() || cpu_is_u8500ed())
- asicid = readl(__io_address(U8500_ASIC_ID_LOC_ED_V1));
- else if (cpu_is_u8500v2())
- asicid = readl(__io_address(U8500_ASIC_ID_LOC_V2));
- else
- BUG();
-
- db8500_id.process = (asicid >> 24);
- db8500_id.partnumber = (asicid >> 16) & 0xFFFFU;
- db8500_id.revision = asicid & 0xFFU;
-}
-
-bool cpu_is_u8500v10(void)
-{
- return (db8500_id.revision == U8500_ASIC_REV_V10);
-}
-
-bool cpu_is_u8500v11(void)
-{
- return (db8500_id.revision == U8500_ASIC_REV_V11);
-}
-
-bool cpu_is_u8500v20(void)
-{
- return (db8500_id.revision == U8500_ASIC_REV_V20);
-}
-
void __init u8500_map_io(void)
{
+ /*
+ * Map the UARTs early so that the DEBUG_LL stuff continues to work.
+ */
+ iotable_init(u8500_uart_io_desc, ARRAY_SIZE(u8500_uart_io_desc));
+
ux500_map_io();
iotable_init(u8500_io_desc, ARRAY_SIZE(u8500_io_desc));
@@ -127,9 +87,6 @@ void __init u8500_map_io(void)
iotable_init(u8500_v1_io_desc, ARRAY_SIZE(u8500_v1_io_desc));
else if (cpu_is_u8500v2())
iotable_init(u8500_v2_io_desc, ARRAY_SIZE(u8500_v2_io_desc));
-
- /* Read out the ASIC ID as early as we can */
- get_db8500_asic_id();
}
static resource_size_t __initdata db8500_gpio_base[] = {
@@ -159,20 +116,6 @@ static void __init db8500_add_gpios(void)
*/
void __init u8500_init_devices(void)
{
- /* Display some ASIC boilerplate */
- pr_info("DB8500: process: %02x, revision ID: 0x%02x\n",
- db8500_id.process, db8500_id.revision);
- if (cpu_is_u8500ed())
- pr_info("DB8500: Early Drop (ED)\n");
- else if (cpu_is_u8500v10())
- pr_info("DB8500: version 1.0\n");
- else if (cpu_is_u8500v11())
- pr_info("DB8500: version 1.1\n");
- else if (cpu_is_u8500v20())
- pr_info("DB8500: version 2.0\n");
- else
- pr_warning("ASIC: UNKNOWN SILICON VERSION!\n");
-
if (cpu_is_u8500ed())
dma40_u8500ed_fixup();
diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c
index 5730409c0f7d..5a43107c6232 100644
--- a/arch/arm/mach-ux500/cpu.c
+++ b/arch/arm/mach-ux500/cpu.c
@@ -23,37 +23,25 @@
#include "clock.h"
-static struct map_desc ux500_io_desc[] __initdata = {
- __IO_DEV_DESC(UX500_UART0_BASE, SZ_4K),
- __IO_DEV_DESC(UX500_UART2_BASE, SZ_4K),
-
- __IO_DEV_DESC(UX500_GIC_CPU_BASE, SZ_4K),
- __IO_DEV_DESC(UX500_GIC_DIST_BASE, SZ_4K),
- __IO_DEV_DESC(UX500_L2CC_BASE, SZ_4K),
- __IO_DEV_DESC(UX500_TWD_BASE, SZ_4K),
- __IO_DEV_DESC(UX500_SCU_BASE, SZ_4K),
-
- __IO_DEV_DESC(UX500_CLKRST1_BASE, SZ_4K),
- __IO_DEV_DESC(UX500_CLKRST2_BASE, SZ_4K),
- __IO_DEV_DESC(UX500_CLKRST3_BASE, SZ_4K),
- __IO_DEV_DESC(UX500_CLKRST5_BASE, SZ_4K),
- __IO_DEV_DESC(UX500_CLKRST6_BASE, SZ_4K),
-
- __IO_DEV_DESC(UX500_MTU0_BASE, SZ_4K),
- __IO_DEV_DESC(UX500_MTU1_BASE, SZ_4K),
-
- __IO_DEV_DESC(UX500_BACKUPRAM0_BASE, SZ_8K),
-};
-
-void __init ux500_map_io(void)
-{
- iotable_init(ux500_io_desc, ARRAY_SIZE(ux500_io_desc));
-}
+#ifdef CONFIG_CACHE_L2X0
+static void __iomem *l2x0_base;
+#endif
void __init ux500_init_irq(void)
{
- gic_init(0, 29, __io_address(UX500_GIC_DIST_BASE),
- __io_address(UX500_GIC_CPU_BASE));
+ void __iomem *dist_base;
+ void __iomem *cpu_base;
+
+ if (cpu_is_u5500()) {
+ dist_base = __io_address(U5500_GIC_DIST_BASE);
+ cpu_base = __io_address(U5500_GIC_CPU_BASE);
+ } else if (cpu_is_u8500()) {
+ dist_base = __io_address(U8500_GIC_DIST_BASE);
+ cpu_base = __io_address(U8500_GIC_CPU_BASE);
+ } else
+ ux500_unknown_soc();
+
+ gic_init(0, 29, dist_base, cpu_base);
/*
* Init clocks here so that they are available for system timer
@@ -74,7 +62,8 @@ static inline void ux500_cache_wait(void __iomem *reg, unsigned long mask)
static inline void ux500_cache_sync(void)
{
- void __iomem *base = __io_address(UX500_L2CC_BASE);
+ void __iomem *base = l2x0_base;
+
writel_relaxed(0, base + L2X0_CACHE_SYNC);
ux500_cache_wait(base + L2X0_CACHE_SYNC, 1);
}
@@ -96,20 +85,23 @@ static void ux500_l2x0_disable(void)
*/
static void ux500_l2x0_inv_all(void)
{
- void __iomem *l2x0_base = __io_address(UX500_L2CC_BASE);
+ void __iomem *base = l2x0_base;
uint32_t l2x0_way_mask = (1<<16) - 1; /* Bitmask of active ways */
/* invalidate all ways */
- writel_relaxed(l2x0_way_mask, l2x0_base + L2X0_INV_WAY);
- ux500_cache_wait(l2x0_base + L2X0_INV_WAY, l2x0_way_mask);
+ writel_relaxed(l2x0_way_mask, base + L2X0_INV_WAY);
+ ux500_cache_wait(base + L2X0_INV_WAY, l2x0_way_mask);
ux500_cache_sync();
}
static int ux500_l2x0_init(void)
{
- void __iomem *l2x0_base;
-
- l2x0_base = __io_address(UX500_L2CC_BASE);
+ if (cpu_is_u5500())
+ l2x0_base = __io_address(U5500_L2CC_BASE);
+ else if (cpu_is_u8500())
+ l2x0_base = __io_address(U8500_L2CC_BASE);
+ else
+ ux500_unknown_soc();
/* 64KB way size, 8 way associativity, force WA */
l2x0_init(l2x0_base, 0x3e060000, 0xc0000fff);
@@ -127,13 +119,21 @@ static void __init ux500_timer_init(void)
{
#ifdef CONFIG_LOCAL_TIMERS
/* Setup the local timer base */
- twd_base = __io_address(UX500_TWD_BASE);
+ if (cpu_is_u5500())
+ twd_base = __io_address(U5500_TWD_BASE);
+ else if (cpu_is_u8500())
+ twd_base = __io_address(U8500_TWD_BASE);
+ else
+ ux500_unknown_soc();
#endif
- /* Setup the MTU base */
- if (cpu_is_u8500ed())
+ if (cpu_is_u5500())
+ mtu_base = __io_address(U5500_MTU0_BASE);
+ else if (cpu_is_u8500ed())
mtu_base = __io_address(U8500_MTU0_BASE_ED);
+ else if (cpu_is_u8500())
+ mtu_base = __io_address(U8500_MTU0_BASE);
else
- mtu_base = __io_address(UX500_MTU0_BASE);
+ ux500_unknown_soc();
nmdk_timer_init();
}
diff --git a/arch/arm/mach-ux500/id.c b/arch/arm/mach-ux500/id.c
new file mode 100644
index 000000000000..d35122ebc67b
--- /dev/null
+++ b/arch/arm/mach-ux500/id.c
@@ -0,0 +1,107 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+
+#include <asm/cputype.h>
+#include <asm/tlbflush.h>
+#include <asm/cacheflush.h>
+#include <asm/mach/map.h>
+
+#include <mach/hardware.h>
+#include <mach/setup.h>
+
+struct dbx500_asic_id dbx500_id;
+
+static unsigned int ux500_read_asicid(phys_addr_t addr)
+{
+ phys_addr_t base = addr & ~0xfff;
+ struct map_desc desc = {
+ .virtual = IO_ADDRESS(base),
+ .pfn = __phys_to_pfn(base),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ };
+
+ iotable_init(&desc, 1);
+
+ /* As in devicemaps_init() */
+ local_flush_tlb_all();
+ flush_cache_all();
+
+ return readl(__io_address(addr));
+}
+
+static void ux500_print_soc_info(unsigned int asicid)
+{
+ unsigned int rev = dbx500_revision();
+
+ pr_info("DB%4x ", dbx500_partnumber());
+
+ if (rev == 0x01)
+ pr_cont("Early Drop");
+ else if (rev >= 0xA0)
+ pr_cont("v%d.%d" , (rev >> 4) - 0xA + 1, rev & 0xf);
+ else
+ pr_cont("Unknown");
+
+ pr_cont(" [%#010x]\n", asicid);
+}
+
+static unsigned int partnumber(unsigned int asicid)
+{
+ return (asicid >> 8) & 0xffff;
+}
+
+/*
+ * SOC MIDR ASICID ADDRESS ASICID VALUE
+ * DB8500ed 0x410fc090 0x9001FFF4 0x00850001
+ * DB8500v1 0x411fc091 0x9001FFF4 0x008500A0
+ * DB8500v1.1 0x411fc091 0x9001FFF4 0x008500A1
+ * DB8500v2 0x412fc091 0x9001DBF4 0x008500B0
+ * DB5500v1 0x412fc091 0x9001FFF4 0x005500A0
+ */
+
+void __init ux500_map_io(void)
+{
+ unsigned int cpuid = read_cpuid_id();
+ unsigned int asicid = 0;
+ phys_addr_t addr = 0;
+
+ switch (cpuid) {
+ case 0x410fc090: /* DB8500ed */
+ case 0x411fc091: /* DB8500v1 */
+ addr = 0x9001FFF4;
+ break;
+
+ case 0x412fc091: /* DB8500v2 / DB5500v1 */
+ asicid = ux500_read_asicid(0x9001DBF4);
+ if (partnumber(asicid) == 0x8500)
+ /* DB8500v2 */
+ break;
+
+ /* DB5500v1 */
+ addr = 0x9001FFF4;
+ break;
+ }
+
+ if (addr)
+ asicid = ux500_read_asicid(addr);
+
+ if (!asicid) {
+ pr_err("Unable to identify SoC\n");
+ ux500_unknown_soc();
+ }
+
+ dbx500_id.process = asicid >> 24;
+ dbx500_id.partnumber = partnumber(asicid);
+ dbx500_id.revision = asicid & 0xff;
+
+ ux500_print_soc_info(asicid);
+}
diff --git a/arch/arm/mach-ux500/include/mach/debug-macro.S b/arch/arm/mach-ux500/include/mach/debug-macro.S
index be7c0f14e310..700fb05ee815 100644
--- a/arch/arm/mach-ux500/include/mach/debug-macro.S
+++ b/arch/arm/mach-ux500/include/mach/debug-macro.S
@@ -14,7 +14,24 @@
#error Invalid Ux500 debug UART
#endif
-#define __UX500_UART(n) UX500_UART##n##_BASE
+/*
+ * DEBUG_LL only works if only one SOC is built in. We don't use #else below
+ * in order to get "__UX500_UART redefined" warnings if more than one SOC is
+ * built, so that there's some hint during the build that something is wrong.
+ */
+
+#ifdef CONFIG_UX500_SOC_DB5500
+#define __UX500_UART(n) U5500_UART##n##_BASE
+#endif
+
+#ifdef CONFIG_UX500_SOC_DB8500
+#define __UX500_UART(n) U8500_UART##n##_BASE
+#endif
+
+#ifndef __UX500_UART
+#error Unknown SOC
+#endif
+
#define UX500_UART(n) __UX500_UART(n)
#define UART_BASE UX500_UART(CONFIG_UX500_DEBUG_UART)
diff --git a/arch/arm/mach-ux500/include/mach/entry-macro.S b/arch/arm/mach-ux500/include/mach/entry-macro.S
index a37f585a3ecb..071bba94f727 100644
--- a/arch/arm/mach-ux500/include/mach/entry-macro.S
+++ b/arch/arm/mach-ux500/include/mach/entry-macro.S
@@ -11,15 +11,10 @@
* warranty of any kind, whether express or implied.
*/
#include <mach/hardware.h>
-#define HAVE_GET_IRQNR_PREAMBLE
#include <asm/hardware/entry-macro-gic.S>
.macro disable_fiq
.endm
- .macro get_irqnr_preamble, base, tmp
- ldr \base, =IO_ADDRESS(UX500_GIC_CPU_BASE)
- .endm
-
.macro arch_ret_to_user, tmp1, tmp2
.endm
diff --git a/arch/arm/mach-ux500/include/mach/hardware.h b/arch/arm/mach-ux500/include/mach/hardware.h
index 6295cc581355..bf63f2631ba0 100644
--- a/arch/arm/mach-ux500/include/mach/hardware.h
+++ b/arch/arm/mach-ux500/include/mach/hardware.h
@@ -29,118 +29,12 @@
#include <mach/db8500-regs.h>
#include <mach/db5500-regs.h>
-#ifdef CONFIG_UX500_SOC_DB8500
-#define UX500(periph) U8500_##periph##_BASE
-#elif defined(CONFIG_UX500_SOC_DB5500)
-#define UX500(periph) U5500_##periph##_BASE
-#endif
-
-#define UX500_BACKUPRAM0_BASE UX500(BACKUPRAM0)
-#define UX500_BACKUPRAM1_BASE UX500(BACKUPRAM1)
-#define UX500_B2R2_BASE UX500(B2R2)
-
-#define UX500_CLKRST1_BASE UX500(CLKRST1)
-#define UX500_CLKRST2_BASE UX500(CLKRST2)
-#define UX500_CLKRST3_BASE UX500(CLKRST3)
-#define UX500_CLKRST5_BASE UX500(CLKRST5)
-#define UX500_CLKRST6_BASE UX500(CLKRST6)
-
-#define UX500_DMA_BASE UX500(DMA)
-#define UX500_FSMC_BASE UX500(FSMC)
-
-#define UX500_GIC_CPU_BASE UX500(GIC_CPU)
-#define UX500_GIC_DIST_BASE UX500(GIC_DIST)
-
-#define UX500_I2C1_BASE UX500(I2C1)
-#define UX500_I2C2_BASE UX500(I2C2)
-#define UX500_I2C3_BASE UX500(I2C3)
-
-#define UX500_L2CC_BASE UX500(L2CC)
-#define UX500_MCDE_BASE UX500(MCDE)
-#define UX500_MTU0_BASE UX500(MTU0)
-#define UX500_MTU1_BASE UX500(MTU1)
-#define UX500_PRCMU_BASE UX500(PRCMU)
-
-#define UX500_RNG_BASE UX500(RNG)
-#define UX500_RTC_BASE UX500(RTC)
-
-#define UX500_SCU_BASE UX500(SCU)
-
-#define UX500_SDI0_BASE UX500(SDI0)
-#define UX500_SDI1_BASE UX500(SDI1)
-#define UX500_SDI2_BASE UX500(SDI2)
-#define UX500_SDI3_BASE UX500(SDI3)
-#define UX500_SDI4_BASE UX500(SDI4)
-
-#define UX500_SPI0_BASE UX500(SPI0)
-#define UX500_SPI1_BASE UX500(SPI1)
-#define UX500_SPI2_BASE UX500(SPI2)
-#define UX500_SPI3_BASE UX500(SPI3)
-
-#define UX500_SIA_BASE UX500(SIA)
-#define UX500_SVA_BASE UX500(SVA)
-
-#define UX500_TWD_BASE UX500(TWD)
-
-#define UX500_UART0_BASE UX500(UART0)
-#define UX500_UART1_BASE UX500(UART1)
-#define UX500_UART2_BASE UX500(UART2)
-
-#define UX500_USBOTG_BASE UX500(USBOTG)
-
/* ST-Ericsson modified pl022 id */
#define SSP_PER_ID 0x01080022
#ifndef __ASSEMBLY__
-#include <asm/cputype.h>
-
-static inline bool cpu_is_u8500(void)
-{
-#ifdef CONFIG_UX500_SOC_DB8500
- return 1;
-#else
- return 0;
-#endif
-}
-
-#define CPUID_DB8500ED 0x410fc090
-#define CPUID_DB8500V1 0x411fc091
-#define CPUID_DB8500V2 0x412fc091
-
-static inline bool cpu_is_u8500ed(void)
-{
- return cpu_is_u8500() && (read_cpuid_id() == CPUID_DB8500ED);
-}
-
-static inline bool cpu_is_u8500v1(void)
-{
- return cpu_is_u8500() && (read_cpuid_id() == CPUID_DB8500V1);
-}
-
-static inline bool cpu_is_u8500v2(void)
-{
- return cpu_is_u8500() && (read_cpuid_id() == CPUID_DB8500V2);
-}
-
-#ifdef CONFIG_UX500_SOC_DB8500
-bool cpu_is_u8500v10(void);
-bool cpu_is_u8500v11(void);
-bool cpu_is_u8500v20(void);
-#else
-static inline bool cpu_is_u8500v10(void) { return false; }
-static inline bool cpu_is_u8500v11(void) { return false; }
-static inline bool cpu_is_u8500v20(void) { return false; }
-#endif
-
-static inline bool cpu_is_u5500(void)
-{
-#ifdef CONFIG_UX500_SOC_DB5500
- return 1;
-#else
- return 0;
-#endif
-}
+#include <mach/id.h>
#define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x)
diff --git a/arch/arm/mach-ux500/include/mach/id.h b/arch/arm/mach-ux500/include/mach/id.h
new file mode 100644
index 000000000000..f1288d10b6ab
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/id.h
@@ -0,0 +1,80 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#ifndef __MACH_UX500_ID
+#define __MACH_UX500_ID
+
+/**
+ * struct dbx500_asic_id - fields of the ASIC ID
+ * @process: the manufacturing process, 0x40 is 40 nm 0x00 is "standard"
+ * @partnumber: hithereto 0x8500 for DB8500
+ * @revision: version code in the series
+ */
+struct dbx500_asic_id {
+ u16 partnumber;
+ u8 revision;
+ u8 process;
+};
+
+extern struct dbx500_asic_id dbx500_id;
+
+static inline unsigned int __attribute_const__ dbx500_partnumber(void)
+{
+ return dbx500_id.partnumber;
+}
+
+static inline unsigned int __attribute_const__ dbx500_revision(void)
+{
+ return dbx500_id.revision;
+}
+
+/*
+ * SOCs
+ */
+
+static inline bool __attribute_const__ cpu_is_u8500(void)
+{
+ return dbx500_partnumber() == 0x8500;
+}
+
+static inline bool __attribute_const__ cpu_is_u5500(void)
+{
+ return dbx500_partnumber() == 0x5500;
+}
+
+/*
+ * 8500 revisions
+ */
+
+static inline bool __attribute_const__ cpu_is_u8500ed(void)
+{
+ return cpu_is_u8500() && dbx500_revision() == 0x00;
+}
+
+static inline bool __attribute_const__ cpu_is_u8500v1(void)
+{
+ return cpu_is_u8500() && (dbx500_revision() & 0xf0) == 0xA0;
+}
+
+static inline bool __attribute_const__ cpu_is_u8500v10(void)
+{
+ return cpu_is_u8500() && dbx500_revision() == 0xA0;
+}
+
+static inline bool __attribute_const__ cpu_is_u8500v11(void)
+{
+ return cpu_is_u8500() && dbx500_revision() == 0xA1;
+}
+
+static inline bool __attribute_const__ cpu_is_u8500v2(void)
+{
+ return cpu_is_u8500() && ((dbx500_revision() & 0xf0) == 0xB0);
+}
+
+#define ux500_unknown_soc() BUG()
+
+#endif
diff --git a/arch/arm/mach-ux500/include/mach/irqs.h b/arch/arm/mach-ux500/include/mach/irqs.h
index 880ae45bc235..ba1294c13c4d 100644
--- a/arch/arm/mach-ux500/include/mach/irqs.h
+++ b/arch/arm/mach-ux500/include/mach/irqs.h
@@ -36,7 +36,7 @@
/* This will be overridden by board-specific irq headers */
#define IRQ_BOARD_END IRQ_BOARD_START
-#ifdef CONFIG_MACH_U8500_MOP
+#ifdef CONFIG_MACH_U8500
#include <mach/irqs-board-mop500.h>
#endif
diff --git a/arch/arm/mach-ux500/include/mach/setup.h b/arch/arm/mach-ux500/include/mach/setup.h
index 469877e0de90..a7d363fdb4cd 100644
--- a/arch/arm/mach-ux500/include/mach/setup.h
+++ b/arch/arm/mach-ux500/include/mach/setup.h
@@ -14,7 +14,7 @@
#include <asm/mach/time.h>
#include <linux/init.h>
-extern void __init ux500_map_io(void);
+void __init ux500_map_io(void);
extern void __init u5500_map_io(void);
extern void __init u8500_map_io(void);
diff --git a/arch/arm/mach-ux500/modem-irq-db5500.c b/arch/arm/mach-ux500/modem-irq-db5500.c
index 3187f8871169..e1296a7447c8 100644
--- a/arch/arm/mach-ux500/modem-irq-db5500.c
+++ b/arch/arm/mach-ux500/modem-irq-db5500.c
@@ -12,6 +12,8 @@
#include <linux/io.h>
#include <linux/slab.h>
+#include <mach/id.h>
+
#define MODEM_INTCON_BASE_ADDR 0xBFFD3000
#define MODEM_INTCON_SIZE 0xFFF
@@ -101,6 +103,9 @@ static int modem_irq_init(void)
static struct irq_chip modem_irq_chip;
struct modem_irq *mi;
+ if (!cpu_is_u5500())
+ return -ENODEV;
+
pr_info("modem_irq: Set up IRQ handler for incoming modem IRQ %d\n",
IRQ_DB5500_MODEM);
diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c
index d77e76cb7edd..4fff4d408417 100644
--- a/arch/arm/mach-ux500/platsmp.c
+++ b/arch/arm/mach-ux500/platsmp.c
@@ -20,6 +20,7 @@
#include <asm/cacheflush.h>
#include <asm/smp_scu.h>
#include <mach/hardware.h>
+#include <mach/setup.h>
/*
* control for which core is the next to come out of the secondary
@@ -40,6 +41,18 @@ static void write_pen_release(int val)
outer_clean_range(__pa(&pen_release), __pa(&pen_release + 1));
}
+static void __iomem *scu_base_addr(void)
+{
+ if (cpu_is_u5500())
+ return __io_address(U5500_SCU_BASE);
+ else if (cpu_is_u8500())
+ return __io_address(U8500_SCU_BASE);
+ else
+ ux500_unknown_soc();
+
+ return NULL;
+}
+
static DEFINE_SPINLOCK(boot_lock);
void __cpuinit platform_secondary_init(unsigned int cpu)
@@ -100,21 +113,28 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
static void __init wakeup_secondary(void)
{
+ void __iomem *backupram;
+
+ if (cpu_is_u5500())
+ backupram = __io_address(U5500_BACKUPRAM0_BASE);
+ else if (cpu_is_u8500())
+ backupram = __io_address(U8500_BACKUPRAM0_BASE);
+ else
+ ux500_unknown_soc();
+
/*
* write the address of secondary startup into the backup ram register
* at offset 0x1FF4, then write the magic number 0xA1FEED01 to the
* backup ram register at offset 0x1FF0, which is what boot rom code
* is waiting for. This would wake up the secondary core from WFE
*/
-#define U8500_CPU1_JUMPADDR_OFFSET 0x1FF4
+#define UX500_CPU1_JUMPADDR_OFFSET 0x1FF4
__raw_writel(virt_to_phys(u8500_secondary_startup),
- __io_address(UX500_BACKUPRAM0_BASE) +
- U8500_CPU1_JUMPADDR_OFFSET);
+ backupram + UX500_CPU1_JUMPADDR_OFFSET);
-#define U8500_CPU1_WAKEMAGIC_OFFSET 0x1FF0
+#define UX500_CPU1_WAKEMAGIC_OFFSET 0x1FF0
__raw_writel(0xA1FEED01,
- __io_address(UX500_BACKUPRAM0_BASE) +
- U8500_CPU1_WAKEMAGIC_OFFSET);
+ backupram + UX500_CPU1_WAKEMAGIC_OFFSET);
/* make sure write buffer is drained */
mb();
@@ -126,9 +146,10 @@ static void __init wakeup_secondary(void)
*/
void __init smp_init_cpus(void)
{
+ void __iomem *scu_base = scu_base_addr();
unsigned int i, ncores;
- ncores = scu_get_core_count(__io_address(UX500_SCU_BASE));
+ ncores = scu_base ? scu_get_core_count(scu_base) : 1;
/* sanity check */
if (ncores > NR_CPUS) {
@@ -154,6 +175,6 @@ void __init platform_smp_prepare_cpus(unsigned int max_cpus)
for (i = 0; i < max_cpus; i++)
set_cpu_present(i, true);
- scu_enable(__io_address(UX500_SCU_BASE));
+ scu_enable(scu_base_addr());
wakeup_secondary();
}