summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--Documentation/devicetree/bindings/spi/fsl-spi.txt6
-rw-r--r--Documentation/devicetree/bindings/spi/spi-bus.txt2
-rw-r--r--Documentation/devicetree/bindings/spi/spi-cadence.txt31
-rw-r--r--Documentation/devicetree/bindings/spi/spi-dw.txt24
-rw-r--r--arch/blackfin/mach-bf609/boards/ezkit.c22
-rw-r--r--arch/blackfin/mach-bf609/clock.c7
-rw-r--r--drivers/spi/Kconfig13
-rw-r--r--drivers/spi/Makefile3
-rw-r--r--drivers/spi/spi-adi-v3.c (renamed from drivers/spi/spi-bfin-v3.c)433
-rw-r--r--drivers/spi/spi-ath79.c1
-rw-r--r--drivers/spi/spi-atmel.c9
-rw-r--r--drivers/spi/spi-bcm63xx-hsspi.c1
-rw-r--r--drivers/spi/spi-bcm63xx.c1
-rw-r--r--drivers/spi/spi-cadence.c673
-rw-r--r--drivers/spi/spi-dw-mmio.c22
-rw-r--r--drivers/spi/spi-dw.c197
-rw-r--r--drivers/spi/spi-dw.h24
-rw-r--r--drivers/spi/spi-falcon.c1
-rw-r--r--drivers/spi/spi-fsl-dspi.c2
-rw-r--r--drivers/spi/spi-fsl-espi.c40
-rw-r--r--drivers/spi/spi-fsl-lib.c6
-rw-r--r--drivers/spi/spi-fsl-lib.h1
-rw-r--r--drivers/spi/spi-fsl-spi.c2
-rw-r--r--drivers/spi/spi-gpio.c2
-rw-r--r--drivers/spi/spi-nuc900.c1
-rw-r--r--drivers/spi/spi-omap-uwire.c1
-rw-r--r--drivers/spi/spi-pl022.c13
-rw-r--r--drivers/spi/spi-pxa2xx-pci.c76
-rw-r--r--drivers/spi/spi-pxa2xx.c21
-rw-r--r--drivers/spi/spi-qup.c6
-rw-r--r--drivers/spi/spi-rspi.c601
-rw-r--r--drivers/spi/spi-s3c24xx.c15
-rw-r--r--drivers/spi/spi-s3c64xx.c6
-rw-r--r--drivers/spi/spi-sh-msiof.c4
-rw-r--r--drivers/spi/spi-sh-sci.c1
-rw-r--r--drivers/spi/spi-sirf.c305
-rw-r--r--drivers/spi/spi-sun4i.c1
-rw-r--r--drivers/spi/spi-sun6i.c1
-rw-r--r--drivers/spi/spi-tegra114.c2
-rw-r--r--drivers/spi/spi-tegra20-sflash.c2
-rw-r--r--drivers/spi/spi-tegra20-slink.c2
-rw-r--r--drivers/spi/spi-tle62x0.c4
-rw-r--r--drivers/spi/spi-topcliff-pch.c5
-rw-r--r--drivers/spi/spi.c22
-rw-r--r--include/linux/spi/adi_spi3.h (renamed from arch/blackfin/include/asm/bfin_spi3.h)20
-rw-r--r--include/linux/spi/rspi.h2
46 files changed, 1582 insertions, 1052 deletions
diff --git a/Documentation/devicetree/bindings/spi/fsl-spi.txt b/Documentation/devicetree/bindings/spi/fsl-spi.txt
index b032dd76e9d2..a2331372068c 100644
--- a/Documentation/devicetree/bindings/spi/fsl-spi.txt
+++ b/Documentation/devicetree/bindings/spi/fsl-spi.txt
@@ -42,6 +42,10 @@ Required properties:
- interrupts : should contain eSPI interrupt, the device has one interrupt.
- fsl,espi-num-chipselects : the number of the chipselect signals.
+Optional properties:
+- fsl,csbef: chip select assertion time in bits before frame starts
+- fsl,csaft: chip select negation time in bits after frame ends
+
Example:
spi@110000 {
#address-cells = <1>;
@@ -51,4 +55,6 @@ Example:
interrupts = <53 0x2>;
interrupt-parent = <&mpic>;
fsl,espi-num-chipselects = <4>;
+ fsl,csbef = <1>;
+ fsl,csaft = <1>;
};
diff --git a/Documentation/devicetree/bindings/spi/spi-bus.txt b/Documentation/devicetree/bindings/spi/spi-bus.txt
index e5a4d1b4acfe..22d57404fdc3 100644
--- a/Documentation/devicetree/bindings/spi/spi-bus.txt
+++ b/Documentation/devicetree/bindings/spi/spi-bus.txt
@@ -55,6 +55,8 @@ contain the following properties.
chip select active high
- spi-3wire - (optional) Empty property indicating device requires
3-wire mode.
+- spi-lsb-first - (optional) Empty property indicating device requires
+ LSB first mode.
- spi-tx-bus-width - (optional) The bus width(number of data wires) that
used for MOSI. Defaults to 1 if not present.
- spi-rx-bus-width - (optional) The bus width(number of data wires) that
diff --git a/Documentation/devicetree/bindings/spi/spi-cadence.txt b/Documentation/devicetree/bindings/spi/spi-cadence.txt
new file mode 100644
index 000000000000..94f09141a4f0
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-cadence.txt
@@ -0,0 +1,31 @@
+Cadence SPI controller Device Tree Bindings
+-------------------------------------------
+
+Required properties:
+- compatible : Should be "cdns,spi-r1p6" or "xlnx,zynq-spi-r1p6".
+- reg : Physical base address and size of SPI registers map.
+- interrupts : Property with a value describing the interrupt
+ number.
+- interrupt-parent : Must be core interrupt controller
+- clock-names : List of input clock names - "ref_clk", "pclk"
+ (See clock bindings for details).
+- clocks : Clock phandles (see clock bindings for details).
+
+Optional properties:
+- num-cs : Number of chip selects used.
+ If a decoder is used, this will be the number of
+ chip selects after the decoder.
+- is-decoded-cs : Flag to indicate whether decoder is used or not.
+
+Example:
+
+ spi@e0007000 {
+ compatible = "xlnx,zynq-spi-r1p6";
+ clock-names = "ref_clk", "pclk";
+ clocks = <&clkc 26>, <&clkc 35>;
+ interrupt-parent = <&intc>;
+ interrupts = <0 49 4>;
+ num-cs = <4>;
+ is-decoded-cs = <0>;
+ reg = <0xe0007000 0x1000>;
+ } ;
diff --git a/Documentation/devicetree/bindings/spi/spi-dw.txt b/Documentation/devicetree/bindings/spi/spi-dw.txt
new file mode 100644
index 000000000000..7b63ed601990
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-dw.txt
@@ -0,0 +1,24 @@
+Synopsys DesignWare SPI master
+
+Required properties:
+- compatible: should be "snps,designware-spi"
+- #address-cells: see spi-bus.txt
+- #size-cells: see spi-bus.txt
+- reg: address and length of the spi master registers
+- interrupts: should contain one interrupt
+- clocks: spi clock phandle
+- num-cs: see spi-bus.txt
+
+Optional properties:
+- cs-gpios: see spi-bus.txt
+
+Example:
+
+spi: spi@4020a000 {
+ compatible = "snps,designware-spi";
+ interrupts = <11 1>;
+ reg = <0x4020a000 0x1000>;
+ clocks = <&pclk>;
+ num-cs = <2>;
+ cs-gpios = <&banka 0 0>;
+};
diff --git a/arch/blackfin/mach-bf609/boards/ezkit.c b/arch/blackfin/mach-bf609/boards/ezkit.c
index 943f7e95ec15..1ba4600de69f 100644
--- a/arch/blackfin/mach-bf609/boards/ezkit.c
+++ b/arch/blackfin/mach-bf609/boards/ezkit.c
@@ -20,7 +20,7 @@
#include <linux/pinctrl/machine.h>
#include <linux/pinctrl/pinconf-generic.h>
#include <linux/platform_data/pinctrl-adi2.h>
-#include <asm/bfin_spi3.h>
+#include <linux/spi/adi_spi3.h>
#include <asm/dma.h>
#include <asm/gpio.h>
#include <asm/nand.h>
@@ -767,13 +767,13 @@ static struct flash_platform_data bfin_spi_flash_data = {
.type = "w25q32",
};
-static struct bfin_spi3_chip spi_flash_chip_info = {
+static struct adi_spi3_chip spi_flash_chip_info = {
.enable_dma = true, /* use dma transfer with this chip*/
};
#endif
#if IS_ENABLED(CONFIG_SPI_SPIDEV)
-static struct bfin_spi3_chip spidev_chip_info = {
+static struct adi_spi3_chip spidev_chip_info = {
.enable_dma = true,
};
#endif
@@ -1736,7 +1736,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
},
#endif
};
-#if IS_ENABLED(CONFIG_SPI_BFIN_V3)
+#if IS_ENABLED(CONFIG_SPI_ADI_V3)
/* SPI (0) */
static struct resource bfin_spi0_resource[] = {
{
@@ -1777,13 +1777,13 @@ static struct resource bfin_spi1_resource[] = {
};
/* SPI controller data */
-static struct bfin_spi3_master bf60x_spi_master_info0 = {
+static struct adi_spi3_master bf60x_spi_master_info0 = {
.num_chipselect = MAX_CTRL_CS + MAX_BLACKFIN_GPIOS,
.pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
};
static struct platform_device bf60x_spi_master0 = {
- .name = "bfin-spi3",
+ .name = "adi-spi3",
.id = 0, /* Bus number */
.num_resources = ARRAY_SIZE(bfin_spi0_resource),
.resource = bfin_spi0_resource,
@@ -1792,13 +1792,13 @@ static struct platform_device bf60x_spi_master0 = {
},
};
-static struct bfin_spi3_master bf60x_spi_master_info1 = {
+static struct adi_spi3_master bf60x_spi_master_info1 = {
.num_chipselect = MAX_CTRL_CS + MAX_BLACKFIN_GPIOS,
.pin_req = {P_SPI1_SCK, P_SPI1_MISO, P_SPI1_MOSI, 0},
};
static struct platform_device bf60x_spi_master1 = {
- .name = "bfin-spi3",
+ .name = "adi-spi3",
.id = 1, /* Bus number */
.num_resources = ARRAY_SIZE(bfin_spi1_resource),
.resource = bfin_spi1_resource,
@@ -1990,7 +1990,7 @@ static struct platform_device *ezkit_devices[] __initdata = {
&bfin_sdh_device,
#endif
-#if IS_ENABLED(CONFIG_SPI_BFIN_V3)
+#if IS_ENABLED(CONFIG_SPI_ADI_V3)
&bf60x_spi_master0,
&bf60x_spi_master1,
#endif
@@ -2051,8 +2051,8 @@ static struct pinctrl_map __initdata bfin_pinmux_map[] = {
PIN_MAP_MUX_GROUP_DEFAULT("bfin_sir.1", "pinctrl-adi2.0", NULL, "uart1"),
PIN_MAP_MUX_GROUP_DEFAULT("bfin-sdh.0", "pinctrl-adi2.0", NULL, "rsi0"),
PIN_MAP_MUX_GROUP_DEFAULT("stmmaceth.0", "pinctrl-adi2.0", NULL, "eth0"),
- PIN_MAP_MUX_GROUP_DEFAULT("bfin-spi3.0", "pinctrl-adi2.0", NULL, "spi0"),
- PIN_MAP_MUX_GROUP_DEFAULT("bfin-spi3.1", "pinctrl-adi2.0", NULL, "spi1"),
+ PIN_MAP_MUX_GROUP_DEFAULT("adi-spi3.0", "pinctrl-adi2.0", NULL, "spi0"),
+ PIN_MAP_MUX_GROUP_DEFAULT("adi-spi3.1", "pinctrl-adi2.0", NULL, "spi1"),
PIN_MAP_MUX_GROUP_DEFAULT("i2c-bfin-twi.0", "pinctrl-adi2.0", NULL, "twi0"),
PIN_MAP_MUX_GROUP_DEFAULT("i2c-bfin-twi.1", "pinctrl-adi2.0", NULL, "twi1"),
PIN_MAP_MUX_GROUP_DEFAULT("bfin-rotary", "pinctrl-adi2.0", NULL, "rotary"),
diff --git a/arch/blackfin/mach-bf609/clock.c b/arch/blackfin/mach-bf609/clock.c
index 56200f37cfc8..244fa4ab4c56 100644
--- a/arch/blackfin/mach-bf609/clock.c
+++ b/arch/blackfin/mach-bf609/clock.c
@@ -363,6 +363,12 @@ static struct clk ethclk = {
.ops = &dummy_clk_ops,
};
+static struct clk spiclk = {
+ .name = "spi",
+ .parent = &sclk1,
+ .ops = &dummy_clk_ops,
+};
+
static struct clk_lookup bf609_clks[] = {
CLK(sys_clkin, NULL, "SYS_CLKIN"),
CLK(pll_clk, NULL, "PLLCLK"),
@@ -375,6 +381,7 @@ static struct clk_lookup bf609_clks[] = {
CLK(dclk, NULL, "DCLK"),
CLK(oclk, NULL, "OCLK"),
CLK(ethclk, NULL, "stmmaceth"),
+ CLK(spiclk, NULL, "spi"),
};
int __init clk_init(void)
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 60f2b41c7310..213b5cbb9dcc 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -91,8 +91,8 @@ config SPI_BFIN5XX
help
This is the SPI controller master driver for Blackfin 5xx processor.
-config SPI_BFIN_V3
- tristate "SPI controller v3 for Blackfin"
+config SPI_ADI_V3
+ tristate "SPI controller v3 for ADI"
depends on BF60x
help
This is the SPI controller v3 master driver
@@ -148,6 +148,13 @@ config SPI_BUTTERFLY
inexpensive battery powered microcontroller evaluation board.
This same cable can be used to flash new firmware.
+config SPI_CADENCE
+ tristate "Cadence SPI controller"
+ depends on ARM
+ help
+ This selects the Cadence SPI controller master driver
+ used by Xilinx Zynq.
+
config SPI_CLPS711X
tristate "CLPS711X host SPI controller"
depends on ARCH_CLPS711X || COMPILE_TEST
@@ -505,7 +512,7 @@ config SPI_TEGRA20_SLINK
config SPI_TOPCLIFF_PCH
tristate "Intel EG20T PCH/LAPIS Semicon IOH(ML7213/ML7223/ML7831) SPI"
- depends on PCI
+ depends on PCI && (X86_32 || COMPILE_TEST)
help
SPI driver for the Topcliff PCH (Platform Controller Hub) SPI bus
used in some x86 embedded processors.
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index bd792669e563..929c9f5eac01 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -18,10 +18,11 @@ obj-$(CONFIG_SPI_BCM2835) += spi-bcm2835.o
obj-$(CONFIG_SPI_BCM63XX) += spi-bcm63xx.o
obj-$(CONFIG_SPI_BCM63XX_HSSPI) += spi-bcm63xx-hsspi.o
obj-$(CONFIG_SPI_BFIN5XX) += spi-bfin5xx.o
-obj-$(CONFIG_SPI_BFIN_V3) += spi-bfin-v3.o
+obj-$(CONFIG_SPI_ADI_V3) += spi-adi-v3.o
obj-$(CONFIG_SPI_BFIN_SPORT) += spi-bfin-sport.o
obj-$(CONFIG_SPI_BITBANG) += spi-bitbang.o
obj-$(CONFIG_SPI_BUTTERFLY) += spi-butterfly.o
+obj-$(CONFIG_SPI_CADENCE) += spi-cadence.o
obj-$(CONFIG_SPI_CLPS711X) += spi-clps711x.o
obj-$(CONFIG_SPI_COLDFIRE_QSPI) += spi-coldfire-qspi.o
obj-$(CONFIG_SPI_DAVINCI) += spi-davinci.o
diff --git a/drivers/spi/spi-bfin-v3.c b/drivers/spi/spi-adi-v3.c
index 4089d0e0d84e..dcb2287c7f8a 100644
--- a/drivers/spi/spi-bfin-v3.c
+++ b/drivers/spi/spi-adi-v3.c
@@ -1,7 +1,7 @@
/*
* Analog Devices SPI3 controller driver
*
- * Copyright (c) 2013 Analog Devices Inc.
+ * Copyright (c) 2014 Analog Devices Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -13,6 +13,7 @@
* GNU General Public License for more details.
*/
+#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/dma-mapping.h>
@@ -26,35 +27,34 @@
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/spi/spi.h>
+#include <linux/spi/adi_spi3.h>
#include <linux/types.h>
-#include <asm/bfin_spi3.h>
-#include <asm/cacheflush.h>
#include <asm/dma.h>
#include <asm/portmux.h>
-enum bfin_spi_state {
+enum adi_spi_state {
START_STATE,
RUNNING_STATE,
DONE_STATE,
ERROR_STATE
};
-struct bfin_spi_master;
+struct adi_spi_master;
-struct bfin_spi_transfer_ops {
- void (*write) (struct bfin_spi_master *);
- void (*read) (struct bfin_spi_master *);
- void (*duplex) (struct bfin_spi_master *);
+struct adi_spi_transfer_ops {
+ void (*write) (struct adi_spi_master *);
+ void (*read) (struct adi_spi_master *);
+ void (*duplex) (struct adi_spi_master *);
};
/* runtime info for spi master */
-struct bfin_spi_master {
+struct adi_spi_master {
/* SPI framework hookup */
struct spi_master *master;
/* Regs base of SPI controller */
- struct bfin_spi_regs __iomem *regs;
+ struct adi_spi_regs __iomem *regs;
/* Pin request list */
u16 *pin_req;
@@ -65,7 +65,7 @@ struct bfin_spi_master {
/* Current message transfer state info */
struct spi_message *cur_msg;
struct spi_transfer *cur_transfer;
- struct bfin_spi_device *cur_chip;
+ struct adi_spi_device *cur_chip;
unsigned transfer_len;
/* transfer buffer */
@@ -90,12 +90,12 @@ struct bfin_spi_master {
u32 ssel;
unsigned long sclk;
- enum bfin_spi_state state;
+ enum adi_spi_state state;
- const struct bfin_spi_transfer_ops *ops;
+ const struct adi_spi_transfer_ops *ops;
};
-struct bfin_spi_device {
+struct adi_spi_device {
u32 control;
u32 clock;
u32 ssel;
@@ -105,17 +105,25 @@ struct bfin_spi_device {
u32 cs_gpio;
u32 tx_dummy_val; /* tx value for rx only transfer */
bool enable_dma;
- const struct bfin_spi_transfer_ops *ops;
+ const struct adi_spi_transfer_ops *ops;
};
-static void bfin_spi_enable(struct bfin_spi_master *drv_data)
+static void adi_spi_enable(struct adi_spi_master *drv_data)
{
- bfin_write_or(&drv_data->regs->control, SPI_CTL_EN);
+ u32 ctl;
+
+ ctl = ioread32(&drv_data->regs->control);
+ ctl |= SPI_CTL_EN;
+ iowrite32(ctl, &drv_data->regs->control);
}
-static void bfin_spi_disable(struct bfin_spi_master *drv_data)
+static void adi_spi_disable(struct adi_spi_master *drv_data)
{
- bfin_write_and(&drv_data->regs->control, ~SPI_CTL_EN);
+ u32 ctl;
+
+ ctl = ioread32(&drv_data->regs->control);
+ ctl &= ~SPI_CTL_EN;
+ iowrite32(ctl, &drv_data->regs->control);
}
/* Caculate the SPI_CLOCK register value based on input HZ */
@@ -128,35 +136,43 @@ static u32 hz_to_spi_clock(u32 sclk, u32 speed_hz)
return spi_clock;
}
-static int bfin_spi_flush(struct bfin_spi_master *drv_data)
+static int adi_spi_flush(struct adi_spi_master *drv_data)
{
unsigned long limit = loops_per_jiffy << 1;
/* wait for stop and clear stat */
- while (!(bfin_read(&drv_data->regs->status) & SPI_STAT_SPIF) && --limit)
+ while (!(ioread32(&drv_data->regs->status) & SPI_STAT_SPIF) && --limit)
cpu_relax();
- bfin_write(&drv_data->regs->status, 0xFFFFFFFF);
+ iowrite32(0xFFFFFFFF, &drv_data->regs->status);
return limit;
}
/* Chip select operation functions for cs_change flag */
-static void bfin_spi_cs_active(struct bfin_spi_master *drv_data, struct bfin_spi_device *chip)
+static void adi_spi_cs_active(struct adi_spi_master *drv_data, struct adi_spi_device *chip)
{
- if (likely(chip->cs < MAX_CTRL_CS))
- bfin_write_and(&drv_data->regs->ssel, ~chip->ssel);
- else
+ if (likely(chip->cs < MAX_CTRL_CS)) {
+ u32 reg;
+ reg = ioread32(&drv_data->regs->ssel);
+ reg &= ~chip->ssel;
+ iowrite32(reg, &drv_data->regs->ssel);
+ } else {
gpio_set_value(chip->cs_gpio, 0);
+ }
}
-static void bfin_spi_cs_deactive(struct bfin_spi_master *drv_data,
- struct bfin_spi_device *chip)
+static void adi_spi_cs_deactive(struct adi_spi_master *drv_data,
+ struct adi_spi_device *chip)
{
- if (likely(chip->cs < MAX_CTRL_CS))
- bfin_write_or(&drv_data->regs->ssel, chip->ssel);
- else
+ if (likely(chip->cs < MAX_CTRL_CS)) {
+ u32 reg;
+ reg = ioread32(&drv_data->regs->ssel);
+ reg |= chip->ssel;
+ iowrite32(reg, &drv_data->regs->ssel);
+ } else {
gpio_set_value(chip->cs_gpio, 1);
+ }
/* Move delay here for consistency */
if (chip->cs_chg_udelay)
@@ -164,187 +180,192 @@ static void bfin_spi_cs_deactive(struct bfin_spi_master *drv_data,
}
/* enable or disable the pin muxed by GPIO and SPI CS to work as SPI CS */
-static inline void bfin_spi_cs_enable(struct bfin_spi_master *drv_data,
- struct bfin_spi_device *chip)
+static inline void adi_spi_cs_enable(struct adi_spi_master *drv_data,
+ struct adi_spi_device *chip)
{
- if (chip->cs < MAX_CTRL_CS)
- bfin_write_or(&drv_data->regs->ssel, chip->ssel >> 8);
+ if (chip->cs < MAX_CTRL_CS) {
+ u32 reg;
+ reg = ioread32(&drv_data->regs->ssel);
+ reg |= chip->ssel >> 8;
+ iowrite32(reg, &drv_data->regs->ssel);
+ }
}
-static inline void bfin_spi_cs_disable(struct bfin_spi_master *drv_data,
- struct bfin_spi_device *chip)
+static inline void adi_spi_cs_disable(struct adi_spi_master *drv_data,
+ struct adi_spi_device *chip)
{
- if (chip->cs < MAX_CTRL_CS)
- bfin_write_and(&drv_data->regs->ssel, ~(chip->ssel >> 8));
+ if (chip->cs < MAX_CTRL_CS) {
+ u32 reg;
+ reg = ioread32(&drv_data->regs->ssel);
+ reg &= ~(chip->ssel >> 8);
+ iowrite32(reg, &drv_data->regs->ssel);
+ }
}
/* stop controller and re-config current chip*/
-static void bfin_spi_restore_state(struct bfin_spi_master *drv_data)
+static void adi_spi_restore_state(struct adi_spi_master *drv_data)
{
- struct bfin_spi_device *chip = drv_data->cur_chip;
+ struct adi_spi_device *chip = drv_data->cur_chip;
/* Clear status and disable clock */
- bfin_write(&drv_data->regs->status, 0xFFFFFFFF);
- bfin_write(&drv_data->regs->rx_control, 0x0);
- bfin_write(&drv_data->regs->tx_control, 0x0);
- bfin_spi_disable(drv_data);
-
- SSYNC();
+ iowrite32(0xFFFFFFFF, &drv_data->regs->status);
+ iowrite32(0x0, &drv_data->regs->rx_control);
+ iowrite32(0x0, &drv_data->regs->tx_control);
+ adi_spi_disable(drv_data);
/* Load the registers */
- bfin_write(&drv_data->regs->control, chip->control);
- bfin_write(&drv_data->regs->clock, chip->clock);
+ iowrite32(chip->control, &drv_data->regs->control);
+ iowrite32(chip->clock, &drv_data->regs->clock);
- bfin_spi_enable(drv_data);
+ adi_spi_enable(drv_data);
drv_data->tx_num = drv_data->rx_num = 0;
/* we always choose tx transfer initiate */
- bfin_write(&drv_data->regs->rx_control, SPI_RXCTL_REN);
- bfin_write(&drv_data->regs->tx_control,
- SPI_TXCTL_TEN | SPI_TXCTL_TTI);
- bfin_spi_cs_active(drv_data, chip);
+ iowrite32(SPI_RXCTL_REN, &drv_data->regs->rx_control);
+ iowrite32(SPI_TXCTL_TEN | SPI_TXCTL_TTI, &drv_data->regs->tx_control);
+ adi_spi_cs_active(drv_data, chip);
}
/* discard invalid rx data and empty rfifo */
-static inline void dummy_read(struct bfin_spi_master *drv_data)
+static inline void dummy_read(struct adi_spi_master *drv_data)
{
- while (!(bfin_read(&drv_data->regs->status) & SPI_STAT_RFE))
- bfin_read(&drv_data->regs->rfifo);
+ while (!(ioread32(&drv_data->regs->status) & SPI_STAT_RFE))
+ ioread32(&drv_data->regs->rfifo);
}
-static void bfin_spi_u8_write(struct bfin_spi_master *drv_data)
+static void adi_spi_u8_write(struct adi_spi_master *drv_data)
{
dummy_read(drv_data);
while (drv_data->tx < drv_data->tx_end) {
- bfin_write(&drv_data->regs->tfifo, (*(u8 *)(drv_data->tx++)));
- while (bfin_read(&drv_data->regs->status) & SPI_STAT_RFE)
+ iowrite32(*(u8 *)(drv_data->tx++), &drv_data->regs->tfifo);
+ while (ioread32(&drv_data->regs->status) & SPI_STAT_RFE)
cpu_relax();
- bfin_read(&drv_data->regs->rfifo);
+ ioread32(&drv_data->regs->rfifo);
}
}
-static void bfin_spi_u8_read(struct bfin_spi_master *drv_data)
+static void adi_spi_u8_read(struct adi_spi_master *drv_data)
{
u32 tx_val = drv_data->cur_chip->tx_dummy_val;
dummy_read(drv_data);
while (drv_data->rx < drv_data->rx_end) {
- bfin_write(&drv_data->regs->tfifo, tx_val);
- while (bfin_read(&drv_data->regs->status) & SPI_STAT_RFE)
+ iowrite32(tx_val, &drv_data->regs->tfifo);
+ while (ioread32(&drv_data->regs->status) & SPI_STAT_RFE)
cpu_relax();
- *(u8 *)(drv_data->rx++) = bfin_read(&drv_data->regs->rfifo);
+ *(u8 *)(drv_data->rx++) = ioread32(&drv_data->regs->rfifo);
}
}
-static void bfin_spi_u8_duplex(struct bfin_spi_master *drv_data)
+static void adi_spi_u8_duplex(struct adi_spi_master *drv_data)
{
dummy_read(drv_data);
while (drv_data->rx < drv_data->rx_end) {
- bfin_write(&drv_data->regs->tfifo, (*(u8 *)(drv_data->tx++)));
- while (bfin_read(&drv_data->regs->status) & SPI_STAT_RFE)
+ iowrite32(*(u8 *)(drv_data->tx++), &drv_data->regs->tfifo);
+ while (ioread32(&drv_data->regs->status) & SPI_STAT_RFE)
cpu_relax();
- *(u8 *)(drv_data->rx++) = bfin_read(&drv_data->regs->rfifo);
+ *(u8 *)(drv_data->rx++) = ioread32(&drv_data->regs->rfifo);
}
}
-static const struct bfin_spi_transfer_ops bfin_bfin_spi_transfer_ops_u8 = {
- .write = bfin_spi_u8_write,
- .read = bfin_spi_u8_read,
- .duplex = bfin_spi_u8_duplex,
+static const struct adi_spi_transfer_ops adi_spi_transfer_ops_u8 = {
+ .write = adi_spi_u8_write,
+ .read = adi_spi_u8_read,
+ .duplex = adi_spi_u8_duplex,
};
-static void bfin_spi_u16_write(struct bfin_spi_master *drv_data)
+static void adi_spi_u16_write(struct adi_spi_master *drv_data)
{
dummy_read(drv_data);
while (drv_data->tx < drv_data->tx_end) {
- bfin_write(&drv_data->regs->tfifo, (*(u16 *)drv_data->tx));
+ iowrite32(*(u16 *)drv_data->tx, &drv_data->regs->tfifo);
drv_data->tx += 2;
- while (bfin_read(&drv_data->regs->status) & SPI_STAT_RFE)
+ while (ioread32(&drv_data->regs->status) & SPI_STAT_RFE)
cpu_relax();
- bfin_read(&drv_data->regs->rfifo);
+ ioread32(&drv_data->regs->rfifo);
}
}
-static void bfin_spi_u16_read(struct bfin_spi_master *drv_data)
+static void adi_spi_u16_read(struct adi_spi_master *drv_data)
{
u32 tx_val = drv_data->cur_chip->tx_dummy_val;
dummy_read(drv_data);
while (drv_data->rx < drv_data->rx_end) {
- bfin_write(&drv_data->regs->tfifo, tx_val);
- while (bfin_read(&drv_data->regs->status) & SPI_STAT_RFE)
+ iowrite32(tx_val, &drv_data->regs->tfifo);
+ while (ioread32(&drv_data->regs->status) & SPI_STAT_RFE)
cpu_relax();
- *(u16 *)drv_data->rx = bfin_read(&drv_data->regs->rfifo);
+ *(u16 *)drv_data->rx = ioread32(&drv_data->regs->rfifo);
drv_data->rx += 2;
}
}
-static void bfin_spi_u16_duplex(struct bfin_spi_master *drv_data)
+static void adi_spi_u16_duplex(struct adi_spi_master *drv_data)
{
dummy_read(drv_data);
while (drv_data->rx < drv_data->rx_end) {
- bfin_write(&drv_data->regs->tfifo, (*(u16 *)drv_data->tx));
+ iowrite32(*(u16 *)drv_data->tx, &drv_data->regs->tfifo);
drv_data->tx += 2;
- while (bfin_read(&drv_data->regs->status) & SPI_STAT_RFE)
+ while (ioread32(&drv_data->regs->status) & SPI_STAT_RFE)
cpu_relax();
- *(u16 *)drv_data->rx = bfin_read(&drv_data->regs->rfifo);
+ *(u16 *)drv_data->rx = ioread32(&drv_data->regs->rfifo);
drv_data->rx += 2;
}
}
-static const struct bfin_spi_transfer_ops bfin_bfin_spi_transfer_ops_u16 = {
- .write = bfin_spi_u16_write,
- .read = bfin_spi_u16_read,
- .duplex = bfin_spi_u16_duplex,
+static const struct adi_spi_transfer_ops adi_spi_transfer_ops_u16 = {
+ .write = adi_spi_u16_write,
+ .read = adi_spi_u16_read,
+ .duplex = adi_spi_u16_duplex,
};
-static void bfin_spi_u32_write(struct bfin_spi_master *drv_data)
+static void adi_spi_u32_write(struct adi_spi_master *drv_data)
{
dummy_read(drv_data);
while (drv_data->tx < drv_data->tx_end) {
- bfin_write(&drv_data->regs->tfifo, (*(u32 *)drv_data->tx));
+ iowrite32(*(u32 *)drv_data->tx, &drv_data->regs->tfifo);
drv_data->tx += 4;
- while (bfin_read(&drv_data->regs->status) & SPI_STAT_RFE)
+ while (ioread32(&drv_data->regs->status) & SPI_STAT_RFE)
cpu_relax();
- bfin_read(&drv_data->regs->rfifo);
+ ioread32(&drv_data->regs->rfifo);
}
}
-static void bfin_spi_u32_read(struct bfin_spi_master *drv_data)
+static void adi_spi_u32_read(struct adi_spi_master *drv_data)
{
u32 tx_val = drv_data->cur_chip->tx_dummy_val;
dummy_read(drv_data);
while (drv_data->rx < drv_data->rx_end) {
- bfin_write(&drv_data->regs->tfifo, tx_val);
- while (bfin_read(&drv_data->regs->status) & SPI_STAT_RFE)
+ iowrite32(tx_val, &drv_data->regs->tfifo);
+ while (ioread32(&drv_data->regs->status) & SPI_STAT_RFE)
cpu_relax();
- *(u32 *)drv_data->rx = bfin_read(&drv_data->regs->rfifo);
+ *(u32 *)drv_data->rx = ioread32(&drv_data->regs->rfifo);
drv_data->rx += 4;
}
}
-static void bfin_spi_u32_duplex(struct bfin_spi_master *drv_data)
+static void adi_spi_u32_duplex(struct adi_spi_master *drv_data)
{
dummy_read(drv_data);
while (drv_data->rx < drv_data->rx_end) {
- bfin_write(&drv_data->regs->tfifo, (*(u32 *)drv_data->tx));
+ iowrite32(*(u32 *)drv_data->tx, &drv_data->regs->tfifo);
drv_data->tx += 4;
- while (bfin_read(&drv_data->regs->status) & SPI_STAT_RFE)
+ while (ioread32(&drv_data->regs->status) & SPI_STAT_RFE)
cpu_relax();
- *(u32 *)drv_data->rx = bfin_read(&drv_data->regs->rfifo);
+ *(u32 *)drv_data->rx = ioread32(&drv_data->regs->rfifo);
drv_data->rx += 4;
}
}
-static const struct bfin_spi_transfer_ops bfin_bfin_spi_transfer_ops_u32 = {
- .write = bfin_spi_u32_write,
- .read = bfin_spi_u32_read,
- .duplex = bfin_spi_u32_duplex,
+static const struct adi_spi_transfer_ops adi_spi_transfer_ops_u32 = {
+ .write = adi_spi_u32_write,
+ .read = adi_spi_u32_read,
+ .duplex = adi_spi_u32_duplex,
};
/* test if there is more transfer to be done */
-static void bfin_spi_next_transfer(struct bfin_spi_master *drv)
+static void adi_spi_next_transfer(struct adi_spi_master *drv)
{
struct spi_message *msg = drv->cur_msg;
struct spi_transfer *t = drv->cur_transfer;
@@ -360,15 +381,15 @@ static void bfin_spi_next_transfer(struct bfin_spi_master *drv)
}
}
-static void bfin_spi_giveback(struct bfin_spi_master *drv_data)
+static void adi_spi_giveback(struct adi_spi_master *drv_data)
{
- struct bfin_spi_device *chip = drv_data->cur_chip;
+ struct adi_spi_device *chip = drv_data->cur_chip;
- bfin_spi_cs_deactive(drv_data, chip);
+ adi_spi_cs_deactive(drv_data, chip);
spi_finalize_current_message(drv_data->master);
}
-static int bfin_spi_setup_transfer(struct bfin_spi_master *drv)
+static int adi_spi_setup_transfer(struct adi_spi_master *drv)
{
struct spi_transfer *t = drv->cur_transfer;
u32 cr, cr_width;
@@ -393,34 +414,33 @@ static int bfin_spi_setup_transfer(struct bfin_spi_master *drv)
switch (t->bits_per_word) {
case 8:
cr_width = SPI_CTL_SIZE08;
- drv->ops = &bfin_bfin_spi_transfer_ops_u8;
+ drv->ops = &adi_spi_transfer_ops_u8;
break;
case 16:
cr_width = SPI_CTL_SIZE16;
- drv->ops = &bfin_bfin_spi_transfer_ops_u16;
+ drv->ops = &adi_spi_transfer_ops_u16;
break;
case 32:
cr_width = SPI_CTL_SIZE32;
- drv->ops = &bfin_bfin_spi_transfer_ops_u32;
+ drv->ops = &adi_spi_transfer_ops_u32;
break;
default:
return -EINVAL;
}
- cr = bfin_read(&drv->regs->control) & ~SPI_CTL_SIZE;
+ cr = ioread32(&drv->regs->control) & ~SPI_CTL_SIZE;
cr |= cr_width;
- bfin_write(&drv->regs->control, cr);
+ iowrite32(cr, &drv->regs->control);
/* speed setup */
- bfin_write(&drv->regs->clock,
- hz_to_spi_clock(drv->sclk, t->speed_hz));
+ iowrite32(hz_to_spi_clock(drv->sclk, t->speed_hz), &drv->regs->clock);
return 0;
}
-static int bfin_spi_dma_xfer(struct bfin_spi_master *drv_data)
+static int adi_spi_dma_xfer(struct adi_spi_master *drv_data)
{
struct spi_transfer *t = drv_data->cur_transfer;
struct spi_message *msg = drv_data->cur_msg;
- struct bfin_spi_device *chip = drv_data->cur_chip;
+ struct adi_spi_device *chip = drv_data->cur_chip;
u32 dma_config;
unsigned long word_count, word_size;
void *tx_buf, *rx_buf;
@@ -498,17 +518,16 @@ static int bfin_spi_dma_xfer(struct bfin_spi_master *drv_data)
set_dma_config(drv_data->rx_dma, dma_config | WNR);
enable_dma(drv_data->tx_dma);
enable_dma(drv_data->rx_dma);
- SSYNC();
- bfin_write(&drv_data->regs->rx_control, SPI_RXCTL_REN | SPI_RXCTL_RDR_NE);
- SSYNC();
- bfin_write(&drv_data->regs->tx_control,
- SPI_TXCTL_TEN | SPI_TXCTL_TTI | SPI_TXCTL_TDR_NF);
+ iowrite32(SPI_RXCTL_REN | SPI_RXCTL_RDR_NE,
+ &drv_data->regs->rx_control);
+ iowrite32(SPI_TXCTL_TEN | SPI_TXCTL_TTI | SPI_TXCTL_TDR_NF,
+ &drv_data->regs->tx_control);
return 0;
}
-static int bfin_spi_pio_xfer(struct bfin_spi_master *drv_data)
+static int adi_spi_pio_xfer(struct adi_spi_master *drv_data)
{
struct spi_message *msg = drv_data->cur_msg;
@@ -529,19 +548,19 @@ static int bfin_spi_pio_xfer(struct bfin_spi_master *drv_data)
return -EIO;
}
- if (!bfin_spi_flush(drv_data))
+ if (!adi_spi_flush(drv_data))
return -EIO;
msg->actual_length += drv_data->transfer_len;
tasklet_schedule(&drv_data->pump_transfers);
return 0;
}
-static void bfin_spi_pump_transfers(unsigned long data)
+static void adi_spi_pump_transfers(unsigned long data)
{
- struct bfin_spi_master *drv_data = (struct bfin_spi_master *)data;
+ struct adi_spi_master *drv_data = (struct adi_spi_master *)data;
struct spi_message *msg = NULL;
struct spi_transfer *t = NULL;
- struct bfin_spi_device *chip = NULL;
+ struct adi_spi_device *chip = NULL;
int ret;
/* Get current state information */
@@ -552,7 +571,7 @@ static void bfin_spi_pump_transfers(unsigned long data)
/* Handle for abort */
if (drv_data->state == ERROR_STATE) {
msg->status = -EIO;
- bfin_spi_giveback(drv_data);
+ adi_spi_giveback(drv_data);
return;
}
@@ -560,14 +579,14 @@ static void bfin_spi_pump_transfers(unsigned long data)
if (t->delay_usecs)
udelay(t->delay_usecs);
if (t->cs_change)
- bfin_spi_cs_deactive(drv_data, chip);
- bfin_spi_next_transfer(drv_data);
+ adi_spi_cs_deactive(drv_data, chip);
+ adi_spi_next_transfer(drv_data);
t = drv_data->cur_transfer;
}
/* Handle end of message */
if (drv_data->state == DONE_STATE) {
msg->status = 0;
- bfin_spi_giveback(drv_data);
+ adi_spi_giveback(drv_data);
return;
}
@@ -577,34 +596,34 @@ static void bfin_spi_pump_transfers(unsigned long data)
return;
}
- ret = bfin_spi_setup_transfer(drv_data);
+ ret = adi_spi_setup_transfer(drv_data);
if (ret) {
msg->status = ret;
- bfin_spi_giveback(drv_data);
+ adi_spi_giveback(drv_data);
}
- bfin_write(&drv_data->regs->status, 0xFFFFFFFF);
- bfin_spi_cs_active(drv_data, chip);
+ iowrite32(0xFFFFFFFF, &drv_data->regs->status);
+ adi_spi_cs_active(drv_data, chip);
drv_data->state = RUNNING_STATE;
if (chip->enable_dma)
- ret = bfin_spi_dma_xfer(drv_data);
+ ret = adi_spi_dma_xfer(drv_data);
else
- ret = bfin_spi_pio_xfer(drv_data);
+ ret = adi_spi_pio_xfer(drv_data);
if (ret) {
msg->status = ret;
- bfin_spi_giveback(drv_data);
+ adi_spi_giveback(drv_data);
}
}
-static int bfin_spi_transfer_one_message(struct spi_master *master,
+static int adi_spi_transfer_one_message(struct spi_master *master,
struct spi_message *m)
{
- struct bfin_spi_master *drv_data = spi_master_get_devdata(master);
+ struct adi_spi_master *drv_data = spi_master_get_devdata(master);
drv_data->cur_msg = m;
drv_data->cur_chip = spi_get_ctldata(drv_data->cur_msg->spi);
- bfin_spi_restore_state(drv_data);
+ adi_spi_restore_state(drv_data);
drv_data->state = START_STATE;
drv_data->cur_transfer = list_entry(drv_data->cur_msg->transfers.next,
@@ -630,15 +649,15 @@ static const u16 ssel[][MAX_SPI_SSEL] = {
P_SPI2_SSEL6, P_SPI2_SSEL7},
};
-static int bfin_spi_setup(struct spi_device *spi)
+static int adi_spi_setup(struct spi_device *spi)
{
- struct bfin_spi_master *drv_data = spi_master_get_devdata(spi->master);
- struct bfin_spi_device *chip = spi_get_ctldata(spi);
- u32 bfin_ctl_reg = SPI_CTL_ODM | SPI_CTL_PSSE;
+ struct adi_spi_master *drv_data = spi_master_get_devdata(spi->master);
+ struct adi_spi_device *chip = spi_get_ctldata(spi);
+ u32 ctl_reg = SPI_CTL_ODM | SPI_CTL_PSSE;
int ret = -EINVAL;
if (!chip) {
- struct bfin_spi3_chip *chip_info = spi->controller_data;
+ struct adi_spi3_chip *chip_info = spi->controller_data;
chip = kzalloc(sizeof(*chip), GFP_KERNEL);
if (!chip) {
@@ -646,7 +665,7 @@ static int bfin_spi_setup(struct spi_device *spi)
return -ENOMEM;
}
if (chip_info) {
- if (chip_info->control & ~bfin_ctl_reg) {
+ if (chip_info->control & ~ctl_reg) {
dev_err(&spi->dev,
"do not set bits that the SPI framework manages\n");
goto error;
@@ -657,6 +676,7 @@ static int bfin_spi_setup(struct spi_device *spi)
chip->enable_dma = chip_info->enable_dma;
}
chip->cs = spi->chip_select;
+
if (chip->cs < MAX_CTRL_CS) {
chip->ssel = (1 << chip->cs) << 8;
ret = peripheral_request(ssel[spi->master->bus_num]
@@ -678,7 +698,7 @@ static int bfin_spi_setup(struct spi_device *spi)
}
/* force a default base state */
- chip->control &= bfin_ctl_reg;
+ chip->control &= ctl_reg;
if (spi->mode & SPI_CPOL)
chip->control |= SPI_CTL_CPOL;
@@ -692,8 +712,8 @@ static int bfin_spi_setup(struct spi_device *spi)
chip->clock = hz_to_spi_clock(drv_data->sclk, spi->max_speed_hz);
- bfin_spi_cs_enable(drv_data, chip);
- bfin_spi_cs_deactive(drv_data, chip);
+ adi_spi_cs_enable(drv_data, chip);
+ adi_spi_cs_deactive(drv_data, chip);
return 0;
error:
@@ -705,10 +725,10 @@ error:
return ret;
}
-static void bfin_spi_cleanup(struct spi_device *spi)
+static void adi_spi_cleanup(struct spi_device *spi)
{
- struct bfin_spi_device *chip = spi_get_ctldata(spi);
- struct bfin_spi_master *drv_data = spi_master_get_devdata(spi->master);
+ struct adi_spi_device *chip = spi_get_ctldata(spi);
+ struct adi_spi_master *drv_data = spi_master_get_devdata(spi->master);
if (!chip)
return;
@@ -716,7 +736,7 @@ static void bfin_spi_cleanup(struct spi_device *spi)
if (chip->cs < MAX_CTRL_CS) {
peripheral_free(ssel[spi->master->bus_num]
[chip->cs-1]);
- bfin_spi_cs_disable(drv_data, chip);
+ adi_spi_cs_disable(drv_data, chip);
} else {
gpio_free(chip->cs_gpio);
}
@@ -725,10 +745,11 @@ static void bfin_spi_cleanup(struct spi_device *spi)
spi_set_ctldata(spi, NULL);
}
-static irqreturn_t bfin_spi_tx_dma_isr(int irq, void *dev_id)
+static irqreturn_t adi_spi_tx_dma_isr(int irq, void *dev_id)
{
- struct bfin_spi_master *drv_data = dev_id;
+ struct adi_spi_master *drv_data = dev_id;
u32 dma_stat = get_dma_curr_irqstat(drv_data->tx_dma);
+ u32 tx_ctl;
clear_dma_irqstat(drv_data->tx_dma);
if (dma_stat & DMA_DONE) {
@@ -739,13 +760,15 @@ static irqreturn_t bfin_spi_tx_dma_isr(int irq, void *dev_id)
if (drv_data->tx)
drv_data->state = ERROR_STATE;
}
- bfin_write_and(&drv_data->regs->tx_control, ~SPI_TXCTL_TDR_NF);
+ tx_ctl = ioread32(&drv_data->regs->tx_control);
+ tx_ctl &= ~SPI_TXCTL_TDR_NF;
+ iowrite32(tx_ctl, &drv_data->regs->tx_control);
return IRQ_HANDLED;
}
-static irqreturn_t bfin_spi_rx_dma_isr(int irq, void *dev_id)
+static irqreturn_t adi_spi_rx_dma_isr(int irq, void *dev_id)
{
- struct bfin_spi_master *drv_data = dev_id;
+ struct adi_spi_master *drv_data = dev_id;
struct spi_message *msg = drv_data->cur_msg;
u32 dma_stat = get_dma_curr_irqstat(drv_data->rx_dma);
@@ -760,8 +783,8 @@ static irqreturn_t bfin_spi_rx_dma_isr(int irq, void *dev_id)
dev_err(&drv_data->master->dev,
"spi rx dma error: %d\n", dma_stat);
}
- bfin_write(&drv_data->regs->tx_control, 0);
- bfin_write(&drv_data->regs->rx_control, 0);
+ iowrite32(0, &drv_data->regs->tx_control);
+ iowrite32(0, &drv_data->regs->rx_control);
if (drv_data->rx_num != drv_data->tx_num)
dev_dbg(&drv_data->master->dev,
"dma interrupt missing: tx=%d,rx=%d\n",
@@ -770,15 +793,15 @@ static irqreturn_t bfin_spi_rx_dma_isr(int irq, void *dev_id)
return IRQ_HANDLED;
}
-static int bfin_spi_probe(struct platform_device *pdev)
+static int adi_spi_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
- struct bfin_spi3_master *info = dev_get_platdata(dev);
+ struct adi_spi3_master *info = dev_get_platdata(dev);
struct spi_master *master;
- struct bfin_spi_master *drv_data;
+ struct adi_spi_master *drv_data;
struct resource *mem, *res;
unsigned int tx_dma, rx_dma;
- unsigned long sclk;
+ struct clk *sclk;
int ret;
if (!info) {
@@ -786,10 +809,10 @@ static int bfin_spi_probe(struct platform_device *pdev)
return -ENODEV;
}
- sclk = get_sclk1();
- if (!sclk) {
- dev_err(dev, "can not get sclk1\n");
- return -ENXIO;
+ sclk = devm_clk_get(dev, "spi");
+ if (IS_ERR(sclk)) {
+ dev_err(dev, "can not get spi clock\n");
+ return PTR_ERR(sclk);
}
res = platform_get_resource(pdev, IORESOURCE_DMA, 0);
@@ -819,9 +842,9 @@ static int bfin_spi_probe(struct platform_device *pdev)
master->bus_num = pdev->id;
master->num_chipselect = info->num_chipselect;
- master->cleanup = bfin_spi_cleanup;
- master->setup = bfin_spi_setup;
- master->transfer_one_message = bfin_spi_transfer_one_message;
+ master->cleanup = adi_spi_cleanup;
+ master->setup = adi_spi_setup;
+ master->transfer_one_message = adi_spi_transfer_one_message;
master->bits_per_word_mask = SPI_BPW_MASK(32) | SPI_BPW_MASK(16) |
SPI_BPW_MASK(8);
@@ -830,7 +853,7 @@ static int bfin_spi_probe(struct platform_device *pdev)
drv_data->tx_dma = tx_dma;
drv_data->rx_dma = rx_dma;
drv_data->pin_req = info->pin_req;
- drv_data->sclk = sclk;
+ drv_data->sclk = clk_get_rate(sclk);
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
drv_data->regs = devm_ioremap_resource(dev, mem);
@@ -845,28 +868,28 @@ static int bfin_spi_probe(struct platform_device *pdev)
dev_err(dev, "can not request SPI TX DMA channel\n");
goto err_put_master;
}
- set_dma_callback(tx_dma, bfin_spi_tx_dma_isr, drv_data);
+ set_dma_callback(tx_dma, adi_spi_tx_dma_isr, drv_data);
ret = request_dma(rx_dma, "SPI_RX_DMA");
if (ret) {
dev_err(dev, "can not request SPI RX DMA channel\n");
goto err_free_tx_dma;
}
- set_dma_callback(drv_data->rx_dma, bfin_spi_rx_dma_isr, drv_data);
+ set_dma_callback(drv_data->rx_dma, adi_spi_rx_dma_isr, drv_data);
/* request CLK, MOSI and MISO */
- ret = peripheral_request_list(drv_data->pin_req, "bfin-spi3");
+ ret = peripheral_request_list(drv_data->pin_req, "adi-spi3");
if (ret < 0) {
dev_err(dev, "can not request spi pins\n");
goto err_free_rx_dma;
}
- bfin_write(&drv_data->regs->control, SPI_CTL_MSTR | SPI_CTL_CPHA);
- bfin_write(&drv_data->regs->ssel, 0x0000FE00);
- bfin_write(&drv_data->regs->delay, 0x0);
+ iowrite32(SPI_CTL_MSTR | SPI_CTL_CPHA, &drv_data->regs->control);
+ iowrite32(0x0000FE00, &drv_data->regs->ssel);
+ iowrite32(0x0, &drv_data->regs->delay);
tasklet_init(&drv_data->pump_transfers,
- bfin_spi_pump_transfers, (unsigned long)drv_data);
+ adi_spi_pump_transfers, (unsigned long)drv_data);
/* register with the SPI framework */
ret = devm_spi_register_master(dev, master);
if (ret) {
@@ -888,43 +911,41 @@ err_put_master:
return ret;
}
-static int bfin_spi_remove(struct platform_device *pdev)
+static int adi_spi_remove(struct platform_device *pdev)
{
struct spi_master *master = platform_get_drvdata(pdev);
- struct bfin_spi_master *drv_data = spi_master_get_devdata(master);
-
- bfin_spi_disable(drv_data);
+ struct adi_spi_master *drv_data = spi_master_get_devdata(master);
+ adi_spi_disable(drv_data);
peripheral_free_list(drv_data->pin_req);
free_dma(drv_data->rx_dma);
free_dma(drv_data->tx_dma);
-
return 0;
}
#ifdef CONFIG_PM
-static int bfin_spi_suspend(struct device *dev)
+static int adi_spi_suspend(struct device *dev)
{
struct spi_master *master = dev_get_drvdata(dev);
- struct bfin_spi_master *drv_data = spi_master_get_devdata(master);
+ struct adi_spi_master *drv_data = spi_master_get_devdata(master);
spi_master_suspend(master);
- drv_data->control = bfin_read(&drv_data->regs->control);
- drv_data->ssel = bfin_read(&drv_data->regs->ssel);
+ drv_data->control = ioread32(&drv_data->regs->control);
+ drv_data->ssel = ioread32(&drv_data->regs->ssel);
- bfin_write(&drv_data->regs->control, SPI_CTL_MSTR | SPI_CTL_CPHA);
- bfin_write(&drv_data->regs->ssel, 0x0000FE00);
+ iowrite32(SPI_CTL_MSTR | SPI_CTL_CPHA, &drv_data->regs->control);
+ iowrite32(0x0000FE00, &drv_data->regs->ssel);
dma_disable_irq(drv_data->rx_dma);
dma_disable_irq(drv_data->tx_dma);
return 0;
}
-static int bfin_spi_resume(struct device *dev)
+static int adi_spi_resume(struct device *dev)
{
struct spi_master *master = dev_get_drvdata(dev);
- struct bfin_spi_master *drv_data = spi_master_get_devdata(master);
+ struct adi_spi_master *drv_data = spi_master_get_devdata(master);
int ret = 0;
/* bootrom may modify spi and dma status when resume in spi boot mode */
@@ -932,8 +953,8 @@ static int bfin_spi_resume(struct device *dev)
dma_enable_irq(drv_data->rx_dma);
dma_enable_irq(drv_data->tx_dma);
- bfin_write(&drv_data->regs->control, drv_data->control);
- bfin_write(&drv_data->regs->ssel, drv_data->ssel);
+ iowrite32(drv_data->control, &drv_data->regs->control);
+ iowrite32(drv_data->ssel, &drv_data->regs->ssel);
ret = spi_master_resume(master);
if (ret) {
@@ -944,21 +965,21 @@ static int bfin_spi_resume(struct device *dev)
return ret;
}
#endif
-static const struct dev_pm_ops bfin_spi_pm_ops = {
- SET_SYSTEM_SLEEP_PM_OPS(bfin_spi_suspend, bfin_spi_resume)
+static const struct dev_pm_ops adi_spi_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(adi_spi_suspend, adi_spi_resume)
};
-MODULE_ALIAS("platform:bfin-spi3");
-static struct platform_driver bfin_spi_driver = {
+MODULE_ALIAS("platform:adi-spi3");
+static struct platform_driver adi_spi_driver = {
.driver = {
- .name = "bfin-spi3",
+ .name = "adi-spi3",
.owner = THIS_MODULE,
- .pm = &bfin_spi_pm_ops,
+ .pm = &adi_spi_pm_ops,
},
- .remove = bfin_spi_remove,
+ .remove = adi_spi_remove,
};
-module_platform_driver_probe(bfin_spi_driver, bfin_spi_probe);
+module_platform_driver_probe(adi_spi_driver, adi_spi_probe);
MODULE_DESCRIPTION("Analog Devices SPI3 controller driver");
MODULE_AUTHOR("Scott Jiang <Scott.Jiang.Linux@gmail.com>");
diff --git a/drivers/spi/spi-ath79.c b/drivers/spi/spi-ath79.c
index 3898b0b9ee77..058db0fe8dc7 100644
--- a/drivers/spi/spi-ath79.c
+++ b/drivers/spi/spi-ath79.c
@@ -16,7 +16,6 @@
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/spinlock.h>
-#include <linux/workqueue.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/spi/spi.h>
diff --git a/drivers/spi/spi-atmel.c b/drivers/spi/spi-atmel.c
index 079e6b1b0cdb..92a6f0d93233 100644
--- a/drivers/spi/spi-atmel.c
+++ b/drivers/spi/spi-atmel.c
@@ -224,7 +224,7 @@ struct atmel_spi {
struct platform_device *pdev;
struct spi_transfer *current_transfer;
- unsigned long current_remaining_bytes;
+ int current_remaining_bytes;
int done_status;
struct completion xfer_completion;
@@ -874,8 +874,9 @@ atmel_spi_pump_pio_data(struct atmel_spi *as, struct spi_transfer *xfer)
spi_readl(as, RDR);
}
if (xfer->bits_per_word > 8) {
- as->current_remaining_bytes -= 2;
- if (as->current_remaining_bytes < 0)
+ if (as->current_remaining_bytes > 2)
+ as->current_remaining_bytes -= 2;
+ else
as->current_remaining_bytes = 0;
} else {
as->current_remaining_bytes--;
@@ -1110,6 +1111,8 @@ static int atmel_spi_one_transfer(struct spi_master *master,
atmel_spi_next_xfer_pio(master, xfer);
} else {
as->current_remaining_bytes -= len;
+ if (as->current_remaining_bytes < 0)
+ as->current_remaining_bytes = 0;
}
} else {
atmel_spi_next_xfer_pio(master, xfer);
diff --git a/drivers/spi/spi-bcm63xx-hsspi.c b/drivers/spi/spi-bcm63xx-hsspi.c
index 5a211e98383b..86f5a98aa7a2 100644
--- a/drivers/spi/spi-bcm63xx-hsspi.c
+++ b/drivers/spi/spi-bcm63xx-hsspi.c
@@ -18,7 +18,6 @@
#include <linux/err.h>
#include <linux/interrupt.h>
#include <linux/spi/spi.h>
-#include <linux/workqueue.h>
#include <linux/mutex.h>
#define HSSPI_GLOBAL_CTRL_REG 0x0
diff --git a/drivers/spi/spi-bcm63xx.c b/drivers/spi/spi-bcm63xx.c
index 0250fa721cea..8510400e7867 100644
--- a/drivers/spi/spi-bcm63xx.c
+++ b/drivers/spi/spi-bcm63xx.c
@@ -29,7 +29,6 @@
#include <linux/spi/spi.h>
#include <linux/completion.h>
#include <linux/err.h>
-#include <linux/workqueue.h>
#include <linux/pm_runtime.h>
#include <bcm63xx_dev_spi.h>
diff --git a/drivers/spi/spi-cadence.c b/drivers/spi/spi-cadence.c
new file mode 100644
index 000000000000..bb758978465d
--- /dev/null
+++ b/drivers/spi/spi-cadence.c
@@ -0,0 +1,673 @@
+/*
+ * Cadence SPI controller driver (master mode only)
+ *
+ * Copyright (C) 2008 - 2014 Xilinx, Inc.
+ *
+ * based on Blackfin On-Chip SPI Driver (spi_bfin5xx.c)
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_irq.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+
+/* Name of this driver */
+#define CDNS_SPI_NAME "cdns-spi"
+
+/* Register offset definitions */
+#define CDNS_SPI_CR_OFFSET 0x00 /* Configuration Register, RW */
+#define CDNS_SPI_ISR_OFFSET 0x04 /* Interrupt Status Register, RO */
+#define CDNS_SPI_IER_OFFSET 0x08 /* Interrupt Enable Register, WO */
+#define CDNS_SPI_IDR_OFFSET 0x0c /* Interrupt Disable Register, WO */
+#define CDNS_SPI_IMR_OFFSET 0x10 /* Interrupt Enabled Mask Register, RO */
+#define CDNS_SPI_ER_OFFSET 0x14 /* Enable/Disable Register, RW */
+#define CDNS_SPI_DR_OFFSET 0x18 /* Delay Register, RW */
+#define CDNS_SPI_TXD_OFFSET 0x1C /* Data Transmit Register, WO */
+#define CDNS_SPI_RXD_OFFSET 0x20 /* Data Receive Register, RO */
+#define CDNS_SPI_SICR_OFFSET 0x24 /* Slave Idle Count Register, RW */
+#define CDNS_SPI_THLD_OFFSET 0x28 /* Transmit FIFO Watermark Register,RW */
+
+/*
+ * SPI Configuration Register bit Masks
+ *
+ * This register contains various control bits that affect the operation
+ * of the SPI controller
+ */
+#define CDNS_SPI_CR_MANSTRT_MASK 0x00010000 /* Manual TX Start */
+#define CDNS_SPI_CR_CPHA_MASK 0x00000004 /* Clock Phase Control */
+#define CDNS_SPI_CR_CPOL_MASK 0x00000002 /* Clock Polarity Control */
+#define CDNS_SPI_CR_SSCTRL_MASK 0x00003C00 /* Slave Select Mask */
+#define CDNS_SPI_CR_BAUD_DIV_MASK 0x00000038 /* Baud Rate Divisor Mask */
+#define CDNS_SPI_CR_MSTREN_MASK 0x00000001 /* Master Enable Mask */
+#define CDNS_SPI_CR_MANSTRTEN_MASK 0x00008000 /* Manual TX Enable Mask */
+#define CDNS_SPI_CR_SSFORCE_MASK 0x00004000 /* Manual SS Enable Mask */
+#define CDNS_SPI_CR_BAUD_DIV_4_MASK 0x00000008 /* Default Baud Div Mask */
+#define CDNS_SPI_CR_DEFAULT_MASK (CDNS_SPI_CR_MSTREN_MASK | \
+ CDNS_SPI_CR_SSCTRL_MASK | \
+ CDNS_SPI_CR_SSFORCE_MASK | \
+ CDNS_SPI_CR_BAUD_DIV_4_MASK)
+
+/*
+ * SPI Configuration Register - Baud rate and slave select
+ *
+ * These are the values used in the calculation of baud rate divisor and
+ * setting the slave select.
+ */
+
+#define CDNS_SPI_BAUD_DIV_MAX 7 /* Baud rate divisor maximum */
+#define CDNS_SPI_BAUD_DIV_MIN 1 /* Baud rate divisor minimum */
+#define CDNS_SPI_BAUD_DIV_SHIFT 3 /* Baud rate divisor shift in CR */
+#define CDNS_SPI_SS_SHIFT 10 /* Slave Select field shift in CR */
+#define CDNS_SPI_SS0 0x1 /* Slave Select zero */
+
+/*
+ * SPI Interrupt Registers bit Masks
+ *
+ * All the four interrupt registers (Status/Mask/Enable/Disable) have the same
+ * bit definitions.
+ */
+#define CDNS_SPI_IXR_TXOW_MASK 0x00000004 /* SPI TX FIFO Overwater */
+#define CDNS_SPI_IXR_MODF_MASK 0x00000002 /* SPI Mode Fault */
+#define CDNS_SPI_IXR_RXNEMTY_MASK 0x00000010 /* SPI RX FIFO Not Empty */
+#define CDNS_SPI_IXR_DEFAULT_MASK (CDNS_SPI_IXR_TXOW_MASK | \
+ CDNS_SPI_IXR_MODF_MASK)
+#define CDNS_SPI_IXR_TXFULL_MASK 0x00000008 /* SPI TX Full */
+#define CDNS_SPI_IXR_ALL_MASK 0x0000007F /* SPI all interrupts */
+
+/*
+ * SPI Enable Register bit Masks
+ *
+ * This register is used to enable or disable the SPI controller
+ */
+#define CDNS_SPI_ER_ENABLE_MASK 0x00000001 /* SPI Enable Bit Mask */
+#define CDNS_SPI_ER_DISABLE_MASK 0x0 /* SPI Disable Bit Mask */
+
+/* SPI FIFO depth in bytes */
+#define CDNS_SPI_FIFO_DEPTH 128
+
+/* Default number of chip select lines */
+#define CDNS_SPI_DEFAULT_NUM_CS 4
+
+/**
+ * struct cdns_spi - This definition defines spi driver instance
+ * @regs: Virtual address of the SPI controller registers
+ * @ref_clk: Pointer to the peripheral clock
+ * @pclk: Pointer to the APB clock
+ * @speed_hz: Current SPI bus clock speed in Hz
+ * @txbuf: Pointer to the TX buffer
+ * @rxbuf: Pointer to the RX buffer
+ * @tx_bytes: Number of bytes left to transfer
+ * @rx_bytes: Number of bytes requested
+ * @dev_busy: Device busy flag
+ * @is_decoded_cs: Flag for decoder property set or not
+ */
+struct cdns_spi {
+ void __iomem *regs;
+ struct clk *ref_clk;
+ struct clk *pclk;
+ u32 speed_hz;
+ const u8 *txbuf;
+ u8 *rxbuf;
+ int tx_bytes;
+ int rx_bytes;
+ u8 dev_busy;
+ u32 is_decoded_cs;
+};
+
+/* Macros for the SPI controller read/write */
+static inline u32 cdns_spi_read(struct cdns_spi *xspi, u32 offset)
+{
+ return readl_relaxed(xspi->regs + offset);
+}
+
+static inline void cdns_spi_write(struct cdns_spi *xspi, u32 offset, u32 val)
+{
+ writel_relaxed(val, xspi->regs + offset);
+}
+
+/**
+ * cdns_spi_init_hw - Initialize the hardware and configure the SPI controller
+ * @xspi: Pointer to the cdns_spi structure
+ *
+ * On reset the SPI controller is configured to be in master mode, baud rate
+ * divisor is set to 4, threshold value for TX FIFO not full interrupt is set
+ * to 1 and size of the word to be transferred as 8 bit.
+ * This function initializes the SPI controller to disable and clear all the
+ * interrupts, enable manual slave select and manual start, deselect all the
+ * chip select lines, and enable the SPI controller.
+ */
+static void cdns_spi_init_hw(struct cdns_spi *xspi)
+{
+ cdns_spi_write(xspi, CDNS_SPI_ER_OFFSET,
+ CDNS_SPI_ER_DISABLE_MASK);
+ cdns_spi_write(xspi, CDNS_SPI_IDR_OFFSET,
+ CDNS_SPI_IXR_ALL_MASK);
+
+ /* Clear the RX FIFO */
+ while (cdns_spi_read(xspi, CDNS_SPI_ISR_OFFSET) &
+ CDNS_SPI_IXR_RXNEMTY_MASK)
+ cdns_spi_read(xspi, CDNS_SPI_RXD_OFFSET);
+
+ cdns_spi_write(xspi, CDNS_SPI_ISR_OFFSET,
+ CDNS_SPI_IXR_ALL_MASK);
+ cdns_spi_write(xspi, CDNS_SPI_CR_OFFSET,
+ CDNS_SPI_CR_DEFAULT_MASK);
+ cdns_spi_write(xspi, CDNS_SPI_ER_OFFSET,
+ CDNS_SPI_ER_ENABLE_MASK);
+}
+
+/**
+ * cdns_spi_chipselect - Select or deselect the chip select line
+ * @spi: Pointer to the spi_device structure
+ * @is_on: Select(0) or deselect (1) the chip select line
+ */
+static void cdns_spi_chipselect(struct spi_device *spi, bool is_high)
+{
+ struct cdns_spi *xspi = spi_master_get_devdata(spi->master);
+ u32 ctrl_reg;
+
+ ctrl_reg = cdns_spi_read(xspi, CDNS_SPI_CR_OFFSET);
+
+ if (is_high) {
+ /* Deselect the slave */
+ ctrl_reg |= CDNS_SPI_CR_SSCTRL_MASK;
+ } else {
+ /* Select the slave */
+ ctrl_reg &= ~CDNS_SPI_CR_SSCTRL_MASK;
+ if (!(xspi->is_decoded_cs))
+ ctrl_reg |= ((~(CDNS_SPI_SS0 << spi->chip_select)) <<
+ CDNS_SPI_SS_SHIFT) &
+ CDNS_SPI_CR_SSCTRL_MASK;
+ else
+ ctrl_reg |= (spi->chip_select << CDNS_SPI_SS_SHIFT) &
+ CDNS_SPI_CR_SSCTRL_MASK;
+ }
+
+ cdns_spi_write(xspi, CDNS_SPI_CR_OFFSET, ctrl_reg);
+}
+
+/**
+ * cdns_spi_config_clock_mode - Sets clock polarity and phase
+ * @spi: Pointer to the spi_device structure
+ *
+ * Sets the requested clock polarity and phase.
+ */
+static void cdns_spi_config_clock_mode(struct spi_device *spi)
+{
+ struct cdns_spi *xspi = spi_master_get_devdata(spi->master);
+ u32 ctrl_reg;
+
+ ctrl_reg = cdns_spi_read(xspi, CDNS_SPI_CR_OFFSET);
+
+ /* Set the SPI clock phase and clock polarity */
+ ctrl_reg &= ~(CDNS_SPI_CR_CPHA_MASK | CDNS_SPI_CR_CPOL_MASK);
+ if (spi->mode & SPI_CPHA)
+ ctrl_reg |= CDNS_SPI_CR_CPHA_MASK;
+ if (spi->mode & SPI_CPOL)
+ ctrl_reg |= CDNS_SPI_CR_CPOL_MASK;
+
+ cdns_spi_write(xspi, CDNS_SPI_CR_OFFSET, ctrl_reg);
+}
+
+/**
+ * cdns_spi_config_clock_freq - Sets clock frequency
+ * @spi: Pointer to the spi_device structure
+ * @transfer: Pointer to the spi_transfer structure which provides
+ * information about next transfer setup parameters
+ *
+ * Sets the requested clock frequency.
+ * Note: If the requested frequency is not an exact match with what can be
+ * obtained using the prescalar value the driver sets the clock frequency which
+ * is lower than the requested frequency (maximum lower) for the transfer. If
+ * the requested frequency is higher or lower than that is supported by the SPI
+ * controller the driver will set the highest or lowest frequency supported by
+ * controller.
+ */
+static void cdns_spi_config_clock_freq(struct spi_device *spi,
+ struct spi_transfer *transfer)
+{
+ struct cdns_spi *xspi = spi_master_get_devdata(spi->master);
+ u32 ctrl_reg, baud_rate_val;
+ unsigned long frequency;
+
+ frequency = clk_get_rate(xspi->ref_clk);
+
+ ctrl_reg = cdns_spi_read(xspi, CDNS_SPI_CR_OFFSET);
+
+ /* Set the clock frequency */
+ if (xspi->speed_hz != transfer->speed_hz) {
+ /* first valid value is 1 */
+ baud_rate_val = CDNS_SPI_BAUD_DIV_MIN;
+ while ((baud_rate_val < CDNS_SPI_BAUD_DIV_MAX) &&
+ (frequency / (2 << baud_rate_val)) > transfer->speed_hz)
+ baud_rate_val++;
+
+ ctrl_reg &= ~CDNS_SPI_CR_BAUD_DIV_MASK;
+ ctrl_reg |= baud_rate_val << CDNS_SPI_BAUD_DIV_SHIFT;
+
+ xspi->speed_hz = frequency / (2 << baud_rate_val);
+ }
+ cdns_spi_write(xspi, CDNS_SPI_CR_OFFSET, ctrl_reg);
+}
+
+/**
+ * cdns_spi_setup_transfer - Configure SPI controller for specified transfer
+ * @spi: Pointer to the spi_device structure
+ * @transfer: Pointer to the spi_transfer structure which provides
+ * information about next transfer setup parameters
+ *
+ * Sets the operational mode of SPI controller for the next SPI transfer and
+ * sets the requested clock frequency.
+ *
+ * Return: Always 0
+ */
+static int cdns_spi_setup_transfer(struct spi_device *spi,
+ struct spi_transfer *transfer)
+{
+ struct cdns_spi *xspi = spi_master_get_devdata(spi->master);
+
+ cdns_spi_config_clock_freq(spi, transfer);
+
+ dev_dbg(&spi->dev, "%s, mode %d, %u bits/w, %u clock speed\n",
+ __func__, spi->mode, spi->bits_per_word,
+ xspi->speed_hz);
+
+ return 0;
+}
+
+/**
+ * cdns_spi_fill_tx_fifo - Fills the TX FIFO with as many bytes as possible
+ * @xspi: Pointer to the cdns_spi structure
+ */
+static void cdns_spi_fill_tx_fifo(struct cdns_spi *xspi)
+{
+ unsigned long trans_cnt = 0;
+
+ while ((trans_cnt < CDNS_SPI_FIFO_DEPTH) &&
+ (xspi->tx_bytes > 0)) {
+ if (xspi->txbuf)
+ cdns_spi_write(xspi, CDNS_SPI_TXD_OFFSET,
+ *xspi->txbuf++);
+ else
+ cdns_spi_write(xspi, CDNS_SPI_TXD_OFFSET, 0);
+
+ xspi->tx_bytes--;
+ trans_cnt++;
+ }
+}
+
+/**
+ * cdns_spi_irq - Interrupt service routine of the SPI controller
+ * @irq: IRQ number
+ * @dev_id: Pointer to the xspi structure
+ *
+ * This function handles TX empty and Mode Fault interrupts only.
+ * On TX empty interrupt this function reads the received data from RX FIFO and
+ * fills the TX FIFO if there is any data remaining to be transferred.
+ * On Mode Fault interrupt this function indicates that transfer is completed,
+ * the SPI subsystem will identify the error as the remaining bytes to be
+ * transferred is non-zero.
+ *
+ * Return: IRQ_HANDLED when handled; IRQ_NONE otherwise.
+ */
+static irqreturn_t cdns_spi_irq(int irq, void *dev_id)
+{
+ struct spi_master *master = dev_id;
+ struct cdns_spi *xspi = spi_master_get_devdata(master);
+ u32 intr_status, status;
+
+ status = IRQ_NONE;
+ intr_status = cdns_spi_read(xspi, CDNS_SPI_ISR_OFFSET);
+ cdns_spi_write(xspi, CDNS_SPI_ISR_OFFSET, intr_status);
+
+ if (intr_status & CDNS_SPI_IXR_MODF_MASK) {
+ /* Indicate that transfer is completed, the SPI subsystem will
+ * identify the error as the remaining bytes to be
+ * transferred is non-zero
+ */
+ cdns_spi_write(xspi, CDNS_SPI_IDR_OFFSET,
+ CDNS_SPI_IXR_DEFAULT_MASK);
+ spi_finalize_current_transfer(master);
+ status = IRQ_HANDLED;
+ } else if (intr_status & CDNS_SPI_IXR_TXOW_MASK) {
+ unsigned long trans_cnt;
+
+ trans_cnt = xspi->rx_bytes - xspi->tx_bytes;
+
+ /* Read out the data from the RX FIFO */
+ while (trans_cnt) {
+ u8 data;
+
+ data = cdns_spi_read(xspi, CDNS_SPI_RXD_OFFSET);
+ if (xspi->rxbuf)
+ *xspi->rxbuf++ = data;
+
+ xspi->rx_bytes--;
+ trans_cnt--;
+ }
+
+ if (xspi->tx_bytes) {
+ /* There is more data to send */
+ cdns_spi_fill_tx_fifo(xspi);
+ } else {
+ /* Transfer is completed */
+ cdns_spi_write(xspi, CDNS_SPI_IDR_OFFSET,
+ CDNS_SPI_IXR_DEFAULT_MASK);
+ spi_finalize_current_transfer(master);
+ }
+ status = IRQ_HANDLED;
+ }
+
+ return status;
+}
+
+/**
+ * cdns_transfer_one - Initiates the SPI transfer
+ * @master: Pointer to spi_master structure
+ * @spi: Pointer to the spi_device structure
+ * @transfer: Pointer to the spi_transfer structure which provides
+ * information about next transfer parameters
+ *
+ * This function fills the TX FIFO, starts the SPI transfer and
+ * returns a positive transfer count so that core will wait for completion.
+ *
+ * Return: Number of bytes transferred in the last transfer
+ */
+static int cdns_transfer_one(struct spi_master *master,
+ struct spi_device *spi,
+ struct spi_transfer *transfer)
+{
+ struct cdns_spi *xspi = spi_master_get_devdata(master);
+
+ xspi->txbuf = transfer->tx_buf;
+ xspi->rxbuf = transfer->rx_buf;
+ xspi->tx_bytes = transfer->len;
+ xspi->rx_bytes = transfer->len;
+
+ cdns_spi_setup_transfer(spi, transfer);
+
+ cdns_spi_fill_tx_fifo(xspi);
+
+ cdns_spi_write(xspi, CDNS_SPI_IER_OFFSET,
+ CDNS_SPI_IXR_DEFAULT_MASK);
+ return transfer->len;
+}
+
+/**
+ * cdns_prepare_transfer_hardware - Prepares hardware for transfer.
+ * @master: Pointer to the spi_master structure which provides
+ * information about the controller.
+ *
+ * This function enables SPI master controller.
+ *
+ * Return: 0 always
+ */
+static int cdns_prepare_transfer_hardware(struct spi_master *master)
+{
+ struct cdns_spi *xspi = spi_master_get_devdata(master);
+
+ cdns_spi_config_clock_mode(master->cur_msg->spi);
+
+ cdns_spi_write(xspi, CDNS_SPI_ER_OFFSET,
+ CDNS_SPI_ER_ENABLE_MASK);
+
+ return 0;
+}
+
+/**
+ * cdns_unprepare_transfer_hardware - Relaxes hardware after transfer
+ * @master: Pointer to the spi_master structure which provides
+ * information about the controller.
+ *
+ * This function disables the SPI master controller.
+ *
+ * Return: 0 always
+ */
+static int cdns_unprepare_transfer_hardware(struct spi_master *master)
+{
+ struct cdns_spi *xspi = spi_master_get_devdata(master);
+
+ cdns_spi_write(xspi, CDNS_SPI_ER_OFFSET,
+ CDNS_SPI_ER_DISABLE_MASK);
+
+ return 0;
+}
+
+/**
+ * cdns_spi_probe - Probe method for the SPI driver
+ * @pdev: Pointer to the platform_device structure
+ *
+ * This function initializes the driver data structures and the hardware.
+ *
+ * Return: 0 on success and error value on error
+ */
+static int cdns_spi_probe(struct platform_device *pdev)
+{
+ int ret = 0, irq;
+ struct spi_master *master;
+ struct cdns_spi *xspi;
+ struct resource *res;
+ u32 num_cs;
+
+ master = spi_alloc_master(&pdev->dev, sizeof(*xspi));
+ if (master == NULL)
+ return -ENOMEM;
+
+ xspi = spi_master_get_devdata(master);
+ master->dev.of_node = pdev->dev.of_node;
+ platform_set_drvdata(pdev, master);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ xspi->regs = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(xspi->regs)) {
+ ret = PTR_ERR(xspi->regs);
+ goto remove_master;
+ }
+
+ xspi->pclk = devm_clk_get(&pdev->dev, "pclk");
+ if (IS_ERR(xspi->pclk)) {
+ dev_err(&pdev->dev, "pclk clock not found.\n");
+ ret = PTR_ERR(xspi->pclk);
+ goto remove_master;
+ }
+
+ xspi->ref_clk = devm_clk_get(&pdev->dev, "ref_clk");
+ if (IS_ERR(xspi->ref_clk)) {
+ dev_err(&pdev->dev, "ref_clk clock not found.\n");
+ ret = PTR_ERR(xspi->ref_clk);
+ goto remove_master;
+ }
+
+ ret = clk_prepare_enable(xspi->pclk);
+ if (ret) {
+ dev_err(&pdev->dev, "Unable to enable APB clock.\n");
+ goto remove_master;
+ }
+
+ ret = clk_prepare_enable(xspi->ref_clk);
+ if (ret) {
+ dev_err(&pdev->dev, "Unable to enable device clock.\n");
+ goto clk_dis_apb;
+ }
+
+ /* SPI controller initializations */
+ cdns_spi_init_hw(xspi);
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq <= 0) {
+ ret = -ENXIO;
+ dev_err(&pdev->dev, "irq number is invalid\n");
+ goto remove_master;
+ }
+
+ ret = devm_request_irq(&pdev->dev, irq, cdns_spi_irq,
+ 0, pdev->name, master);
+ if (ret != 0) {
+ ret = -ENXIO;
+ dev_err(&pdev->dev, "request_irq failed\n");
+ goto remove_master;
+ }
+
+ ret = of_property_read_u32(pdev->dev.of_node, "num-cs", &num_cs);
+
+ if (ret < 0)
+ master->num_chipselect = CDNS_SPI_DEFAULT_NUM_CS;
+ else
+ master->num_chipselect = num_cs;
+
+ ret = of_property_read_u32(pdev->dev.of_node, "is-decoded-cs",
+ &xspi->is_decoded_cs);
+
+ if (ret < 0)
+ xspi->is_decoded_cs = 0;
+
+ master->prepare_transfer_hardware = cdns_prepare_transfer_hardware;
+ master->transfer_one = cdns_transfer_one;
+ master->unprepare_transfer_hardware = cdns_unprepare_transfer_hardware;
+ master->set_cs = cdns_spi_chipselect;
+ master->mode_bits = SPI_CPOL | SPI_CPHA;
+
+ /* Set to default valid value */
+ master->max_speed_hz = clk_get_rate(xspi->ref_clk) / 4;
+ xspi->speed_hz = master->max_speed_hz;
+
+ master->bits_per_word_mask = SPI_BPW_MASK(8);
+
+ ret = spi_register_master(master);
+ if (ret) {
+ dev_err(&pdev->dev, "spi_register_master failed\n");
+ goto clk_dis_all;
+ }
+
+ return ret;
+
+clk_dis_all:
+ clk_disable_unprepare(xspi->ref_clk);
+clk_dis_apb:
+ clk_disable_unprepare(xspi->pclk);
+remove_master:
+ spi_master_put(master);
+ return ret;
+}
+
+/**
+ * cdns_spi_remove - Remove method for the SPI driver
+ * @pdev: Pointer to the platform_device structure
+ *
+ * This function is called if a device is physically removed from the system or
+ * if the driver module is being unloaded. It frees all resources allocated to
+ * the device.
+ *
+ * Return: 0 on success and error value on error
+ */
+static int cdns_spi_remove(struct platform_device *pdev)
+{
+ struct spi_master *master = platform_get_drvdata(pdev);
+ struct cdns_spi *xspi = spi_master_get_devdata(master);
+
+ cdns_spi_write(xspi, CDNS_SPI_ER_OFFSET,
+ CDNS_SPI_ER_DISABLE_MASK);
+
+ clk_disable_unprepare(xspi->ref_clk);
+ clk_disable_unprepare(xspi->pclk);
+
+ spi_unregister_master(master);
+
+ return 0;
+}
+
+/**
+ * cdns_spi_suspend - Suspend method for the SPI driver
+ * @dev: Address of the platform_device structure
+ *
+ * This function disables the SPI controller and
+ * changes the driver state to "suspend"
+ *
+ * Return: Always 0
+ */
+static int __maybe_unused cdns_spi_suspend(struct device *dev)
+{
+ struct platform_device *pdev = container_of(dev,
+ struct platform_device, dev);
+ struct spi_master *master = platform_get_drvdata(pdev);
+ struct cdns_spi *xspi = spi_master_get_devdata(master);
+
+ spi_master_suspend(master);
+
+ clk_disable_unprepare(xspi->ref_clk);
+
+ clk_disable_unprepare(xspi->pclk);
+
+ return 0;
+}
+
+/**
+ * cdns_spi_resume - Resume method for the SPI driver
+ * @dev: Address of the platform_device structure
+ *
+ * This function changes the driver state to "ready"
+ *
+ * Return: 0 on success and error value on error
+ */
+static int __maybe_unused cdns_spi_resume(struct device *dev)
+{
+ struct platform_device *pdev = container_of(dev,
+ struct platform_device, dev);
+ struct spi_master *master = platform_get_drvdata(pdev);
+ struct cdns_spi *xspi = spi_master_get_devdata(master);
+ int ret = 0;
+
+ ret = clk_prepare_enable(xspi->pclk);
+ if (ret) {
+ dev_err(dev, "Cannot enable APB clock.\n");
+ return ret;
+ }
+
+ ret = clk_prepare_enable(xspi->ref_clk);
+ if (ret) {
+ dev_err(dev, "Cannot enable device clock.\n");
+ clk_disable(xspi->pclk);
+ return ret;
+ }
+ spi_master_resume(master);
+
+ return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(cdns_spi_dev_pm_ops, cdns_spi_suspend,
+ cdns_spi_resume);
+
+static struct of_device_id cdns_spi_of_match[] = {
+ { .compatible = "xlnx,zynq-spi-r1p6" },
+ { .compatible = "cdns,spi-r1p6" },
+ { /* end of table */ }
+};
+MODULE_DEVICE_TABLE(of, cdns_spi_of_match);
+
+/* cdns_spi_driver - This structure defines the SPI subsystem platform driver */
+static struct platform_driver cdns_spi_driver = {
+ .probe = cdns_spi_probe,
+ .remove = cdns_spi_remove,
+ .driver = {
+ .name = CDNS_SPI_NAME,
+ .owner = THIS_MODULE,
+ .of_match_table = cdns_spi_of_match,
+ .pm = &cdns_spi_dev_pm_ops,
+ },
+};
+
+module_platform_driver(cdns_spi_driver);
+
+MODULE_AUTHOR("Xilinx, Inc.");
+MODULE_DESCRIPTION("Cadence SPI driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/spi/spi-dw-mmio.c b/drivers/spi/spi-dw-mmio.c
index 1492f5ee9aaa..a5cba14ac3d2 100644
--- a/drivers/spi/spi-dw-mmio.c
+++ b/drivers/spi/spi-dw-mmio.c
@@ -16,6 +16,7 @@
#include <linux/spi/spi.h>
#include <linux/scatterlist.h>
#include <linux/module.h>
+#include <linux/of_gpio.h>
#include "spi-dw.h"
@@ -70,6 +71,27 @@ static int dw_spi_mmio_probe(struct platform_device *pdev)
dws->num_cs = 4;
dws->max_freq = clk_get_rate(dwsmmio->clk);
+ if (pdev->dev.of_node) {
+ int i;
+
+ for (i = 0; i < dws->num_cs; i++) {
+ int cs_gpio = of_get_named_gpio(pdev->dev.of_node,
+ "cs-gpios", i);
+
+ if (cs_gpio == -EPROBE_DEFER) {
+ ret = cs_gpio;
+ goto out;
+ }
+
+ if (gpio_is_valid(cs_gpio)) {
+ ret = devm_gpio_request(&pdev->dev, cs_gpio,
+ dev_name(&pdev->dev));
+ if (ret)
+ goto out;
+ }
+ }
+ }
+
ret = dw_spi_add_host(&pdev->dev, dws);
if (ret)
goto out;
diff --git a/drivers/spi/spi-dw.c b/drivers/spi/spi-dw.c
index 712ac5629cd4..29f33143b795 100644
--- a/drivers/spi/spi-dw.c
+++ b/drivers/spi/spi-dw.c
@@ -24,6 +24,7 @@
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/spi/spi.h>
+#include <linux/gpio.h>
#include "spi-dw.h"
@@ -36,12 +37,6 @@
#define DONE_STATE ((void *)2)
#define ERROR_STATE ((void *)-1)
-#define QUEUE_RUNNING 0
-#define QUEUE_STOPPED 1
-
-#define MRST_SPI_DEASSERT 0
-#define MRST_SPI_ASSERT 1
-
/* Slave spi_dev related */
struct chip_data {
u16 cr0;
@@ -263,28 +258,22 @@ static int map_dma_buffers(struct dw_spi *dws)
static void giveback(struct dw_spi *dws)
{
struct spi_transfer *last_transfer;
- unsigned long flags;
struct spi_message *msg;
- spin_lock_irqsave(&dws->lock, flags);
msg = dws->cur_msg;
dws->cur_msg = NULL;
dws->cur_transfer = NULL;
dws->prev_chip = dws->cur_chip;
dws->cur_chip = NULL;
dws->dma_mapped = 0;
- queue_work(dws->workqueue, &dws->pump_messages);
- spin_unlock_irqrestore(&dws->lock, flags);
last_transfer = list_last_entry(&msg->transfers, struct spi_transfer,
transfer_list);
- if (!last_transfer->cs_change && dws->cs_control)
- dws->cs_control(MRST_SPI_DEASSERT);
+ if (!last_transfer->cs_change)
+ spi_chip_sel(dws, dws->cur_msg->spi, 0);
- msg->state = NULL;
- if (msg->complete)
- msg->complete(msg->context);
+ spi_finalize_current_message(dws->master);
}
static void int_error_stop(struct dw_spi *dws, const char *msg)
@@ -502,7 +491,7 @@ static void pump_transfers(unsigned long data)
dw_writew(dws, DW_SPI_CTRL0, cr0);
spi_set_clk(dws, clk_div ? clk_div : chip->clk_div);
- spi_chip_sel(dws, spi->chip_select);
+ spi_chip_sel(dws, spi, 1);
/* Set the interrupt mask, for poll mode just disable all int */
spi_mask_intr(dws, 0xff);
@@ -529,30 +518,12 @@ early_exit:
return;
}
-static void pump_messages(struct work_struct *work)
+static int dw_spi_transfer_one_message(struct spi_master *master,
+ struct spi_message *msg)
{
- struct dw_spi *dws =
- container_of(work, struct dw_spi, pump_messages);
- unsigned long flags;
-
- /* Lock queue and check for queue work */
- spin_lock_irqsave(&dws->lock, flags);
- if (list_empty(&dws->queue) || dws->run == QUEUE_STOPPED) {
- dws->busy = 0;
- spin_unlock_irqrestore(&dws->lock, flags);
- return;
- }
-
- /* Make sure we are not already running a message */
- if (dws->cur_msg) {
- spin_unlock_irqrestore(&dws->lock, flags);
- return;
- }
-
- /* Extract head of queue */
- dws->cur_msg = list_entry(dws->queue.next, struct spi_message, queue);
- list_del_init(&dws->cur_msg->queue);
+ struct dw_spi *dws = spi_master_get_devdata(master);
+ dws->cur_msg = msg;
/* Initial message state*/
dws->cur_msg->state = START_STATE;
dws->cur_transfer = list_entry(dws->cur_msg->transfers.next,
@@ -560,46 +531,9 @@ static void pump_messages(struct work_struct *work)
transfer_list);
dws->cur_chip = spi_get_ctldata(dws->cur_msg->spi);
- /* Mark as busy and launch transfers */
+ /* Launch transfers */
tasklet_schedule(&dws->pump_transfers);
- dws->busy = 1;
- spin_unlock_irqrestore(&dws->lock, flags);
-}
-
-/* spi_device use this to queue in their spi_msg */
-static int dw_spi_transfer(struct spi_device *spi, struct spi_message *msg)
-{
- struct dw_spi *dws = spi_master_get_devdata(spi->master);
- unsigned long flags;
-
- spin_lock_irqsave(&dws->lock, flags);
-
- if (dws->run == QUEUE_STOPPED) {
- spin_unlock_irqrestore(&dws->lock, flags);
- return -ESHUTDOWN;
- }
-
- msg->actual_length = 0;
- msg->status = -EINPROGRESS;
- msg->state = START_STATE;
-
- list_add_tail(&msg->queue, &dws->queue);
-
- if (dws->run == QUEUE_RUNNING && !dws->busy) {
-
- if (dws->cur_transfer || dws->cur_msg)
- queue_work(dws->workqueue,
- &dws->pump_messages);
- else {
- /* If no other data transaction in air, just go */
- spin_unlock_irqrestore(&dws->lock, flags);
- pump_messages(&dws->pump_messages);
- return 0;
- }
- }
-
- spin_unlock_irqrestore(&dws->lock, flags);
return 0;
}
@@ -608,6 +542,7 @@ static int dw_spi_setup(struct spi_device *spi)
{
struct dw_spi_chip *chip_info = NULL;
struct chip_data *chip;
+ int ret;
/* Only alloc on first setup */
chip = spi_get_ctldata(spi);
@@ -661,81 +596,13 @@ static int dw_spi_setup(struct spi_device *spi)
| (spi->mode << SPI_MODE_OFFSET)
| (chip->tmode << SPI_TMOD_OFFSET);
- return 0;
-}
-
-static int init_queue(struct dw_spi *dws)
-{
- INIT_LIST_HEAD(&dws->queue);
- spin_lock_init(&dws->lock);
-
- dws->run = QUEUE_STOPPED;
- dws->busy = 0;
-
- tasklet_init(&dws->pump_transfers,
- pump_transfers, (unsigned long)dws);
-
- INIT_WORK(&dws->pump_messages, pump_messages);
- dws->workqueue = create_singlethread_workqueue(
- dev_name(dws->master->dev.parent));
- if (dws->workqueue == NULL)
- return -EBUSY;
-
- return 0;
-}
-
-static int start_queue(struct dw_spi *dws)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&dws->lock, flags);
-
- if (dws->run == QUEUE_RUNNING || dws->busy) {
- spin_unlock_irqrestore(&dws->lock, flags);
- return -EBUSY;
+ if (gpio_is_valid(spi->cs_gpio)) {
+ ret = gpio_direction_output(spi->cs_gpio,
+ !(spi->mode & SPI_CS_HIGH));
+ if (ret)
+ return ret;
}
- dws->run = QUEUE_RUNNING;
- dws->cur_msg = NULL;
- dws->cur_transfer = NULL;
- dws->cur_chip = NULL;
- dws->prev_chip = NULL;
- spin_unlock_irqrestore(&dws->lock, flags);
-
- queue_work(dws->workqueue, &dws->pump_messages);
-
- return 0;
-}
-
-static int stop_queue(struct dw_spi *dws)
-{
- unsigned long flags;
- unsigned limit = 50;
- int status = 0;
-
- spin_lock_irqsave(&dws->lock, flags);
- dws->run = QUEUE_STOPPED;
- while ((!list_empty(&dws->queue) || dws->busy) && limit--) {
- spin_unlock_irqrestore(&dws->lock, flags);
- msleep(10);
- spin_lock_irqsave(&dws->lock, flags);
- }
-
- if (!list_empty(&dws->queue) || dws->busy)
- status = -EBUSY;
- spin_unlock_irqrestore(&dws->lock, flags);
-
- return status;
-}
-
-static int destroy_queue(struct dw_spi *dws)
-{
- int status;
-
- status = stop_queue(dws);
- if (status != 0)
- return status;
- destroy_workqueue(dws->workqueue);
return 0;
}
@@ -794,7 +661,7 @@ int dw_spi_add_host(struct device *dev, struct dw_spi *dws)
master->bus_num = dws->bus_num;
master->num_chipselect = dws->num_cs;
master->setup = dw_spi_setup;
- master->transfer = dw_spi_transfer;
+ master->transfer_one_message = dw_spi_transfer_one_message;
master->max_speed_hz = dws->max_freq;
/* Basic HW init */
@@ -808,33 +675,21 @@ int dw_spi_add_host(struct device *dev, struct dw_spi *dws)
}
}
- /* Initial and start queue */
- ret = init_queue(dws);
- if (ret) {
- dev_err(&master->dev, "problem initializing queue\n");
- goto err_diable_hw;
- }
- ret = start_queue(dws);
- if (ret) {
- dev_err(&master->dev, "problem starting queue\n");
- goto err_diable_hw;
- }
+ tasklet_init(&dws->pump_transfers, pump_transfers, (unsigned long)dws);
spi_master_set_devdata(master, dws);
ret = devm_spi_register_master(dev, master);
if (ret) {
dev_err(&master->dev, "problem registering spi master\n");
- goto err_queue_alloc;
+ goto err_dma_exit;
}
mrst_spi_debugfs_init(dws);
return 0;
-err_queue_alloc:
- destroy_queue(dws);
+err_dma_exit:
if (dws->dma_ops && dws->dma_ops->dma_exit)
dws->dma_ops->dma_exit(dws);
-err_diable_hw:
spi_enable_chip(dws, 0);
err_free_master:
spi_master_put(master);
@@ -844,18 +699,10 @@ EXPORT_SYMBOL_GPL(dw_spi_add_host);
void dw_spi_remove_host(struct dw_spi *dws)
{
- int status = 0;
-
if (!dws)
return;
mrst_spi_debugfs_remove(dws);
- /* Remove the queue */
- status = destroy_queue(dws);
- if (status != 0)
- dev_err(&dws->master->dev,
- "dw_spi_remove: workqueue will not complete, message memory not freed\n");
-
if (dws->dma_ops && dws->dma_ops->dma_exit)
dws->dma_ops->dma_exit(dws);
spi_enable_chip(dws, 0);
@@ -868,7 +715,7 @@ int dw_spi_suspend_host(struct dw_spi *dws)
{
int ret = 0;
- ret = stop_queue(dws);
+ ret = spi_master_suspend(dws->master);
if (ret)
return ret;
spi_enable_chip(dws, 0);
@@ -882,7 +729,7 @@ int dw_spi_resume_host(struct dw_spi *dws)
int ret;
spi_hw_init(dws);
- ret = start_queue(dws);
+ ret = spi_master_resume(dws->master);
if (ret)
dev_err(&dws->master->dev, "fail to start queue (%d)\n", ret);
return ret;
diff --git a/drivers/spi/spi-dw.h b/drivers/spi/spi-dw.h
index 587643dae11e..6d2acad34f64 100644
--- a/drivers/spi/spi-dw.h
+++ b/drivers/spi/spi-dw.h
@@ -3,6 +3,7 @@
#include <linux/io.h>
#include <linux/scatterlist.h>
+#include <linux/gpio.h>
/* Register offsets */
#define DW_SPI_CTRL0 0x00
@@ -104,14 +105,6 @@ struct dw_spi {
u16 bus_num;
u16 num_cs; /* supported slave numbers */
- /* Driver message queue */
- struct workqueue_struct *workqueue;
- struct work_struct pump_messages;
- spinlock_t lock;
- struct list_head queue;
- int busy;
- int run;
-
/* Message Transfer pump */
struct tasklet_struct pump_transfers;
@@ -186,15 +179,20 @@ static inline void spi_set_clk(struct dw_spi *dws, u16 div)
dw_writel(dws, DW_SPI_BAUDR, div);
}
-static inline void spi_chip_sel(struct dw_spi *dws, u16 cs)
+static inline void spi_chip_sel(struct dw_spi *dws, struct spi_device *spi,
+ int active)
{
- if (cs > dws->num_cs)
- return;
+ u16 cs = spi->chip_select;
+ int gpio_val = active ? (spi->mode & SPI_CS_HIGH) :
+ !(spi->mode & SPI_CS_HIGH);
if (dws->cs_control)
- dws->cs_control(1);
+ dws->cs_control(active);
+ if (gpio_is_valid(spi->cs_gpio))
+ gpio_set_value(spi->cs_gpio, gpio_val);
- dw_writel(dws, DW_SPI_SER, 1 << cs);
+ if (active)
+ dw_writel(dws, DW_SPI_SER, 1 << cs);
}
/* Disable IRQ bits */
diff --git a/drivers/spi/spi-falcon.c b/drivers/spi/spi-falcon.c
index 09965f069a1c..ba441ad9a007 100644
--- a/drivers/spi/spi-falcon.c
+++ b/drivers/spi/spi-falcon.c
@@ -11,7 +11,6 @@
#include <linux/platform_device.h>
#include <linux/spi/spi.h>
#include <linux/delay.h>
-#include <linux/workqueue.h>
#include <linux/of.h>
#include <linux/of_platform.h>
diff --git a/drivers/spi/spi-fsl-dspi.c b/drivers/spi/spi-fsl-dspi.c
index d565eeee3bd8..5021ddf03f60 100644
--- a/drivers/spi/spi-fsl-dspi.c
+++ b/drivers/spi/spi-fsl-dspi.c
@@ -406,7 +406,7 @@ static irqreturn_t dspi_interrupt(int irq, void *dev_id)
return IRQ_HANDLED;
}
-static struct of_device_id fsl_dspi_dt_ids[] = {
+static const struct of_device_id fsl_dspi_dt_ids[] = {
{ .compatible = "fsl,vf610-dspi", .data = NULL, },
{ /* sentinel */ }
};
diff --git a/drivers/spi/spi-fsl-espi.c b/drivers/spi/spi-fsl-espi.c
index e767f5831b9c..8ebd724e4c59 100644
--- a/drivers/spi/spi-fsl-espi.c
+++ b/drivers/spi/spi-fsl-espi.c
@@ -348,7 +348,7 @@ static void fsl_espi_cmd_trans(struct spi_message *m,
}
espi_trans->tx_buf = local_buf;
- espi_trans->rx_buf = local_buf + espi_trans->n_tx;
+ espi_trans->rx_buf = local_buf;
fsl_espi_do_trans(m, espi_trans);
espi_trans->actual_length = espi_trans->len;
@@ -397,7 +397,7 @@ static void fsl_espi_rw_trans(struct spi_message *m,
espi_trans->n_rx = trans_len;
espi_trans->len = trans_len + n_tx;
espi_trans->tx_buf = local_buf;
- espi_trans->rx_buf = local_buf + n_tx;
+ espi_trans->rx_buf = local_buf;
fsl_espi_do_trans(m, espi_trans);
memcpy(rx_buf + pos, espi_trans->rx_buf + n_tx, trans_len);
@@ -458,7 +458,7 @@ static int fsl_espi_setup(struct spi_device *spi)
return -EINVAL;
if (!cs) {
- cs = kzalloc(sizeof *cs, GFP_KERNEL);
+ cs = devm_kzalloc(&spi->dev, sizeof(*cs), GFP_KERNEL);
if (!cs)
return -ENOMEM;
spi->controller_state = cs;
@@ -586,8 +586,10 @@ static struct spi_master * fsl_espi_probe(struct device *dev,
struct spi_master *master;
struct mpc8xxx_spi *mpc8xxx_spi;
struct fsl_espi_reg *reg_base;
- u32 regval;
- int i, ret = 0;
+ struct device_node *nc;
+ const __be32 *prop;
+ u32 regval, csmode;
+ int i, len, ret = 0;
master = spi_alloc_master(dev, sizeof(struct mpc8xxx_spi));
if (!master) {
@@ -634,8 +636,32 @@ static struct spi_master * fsl_espi_probe(struct device *dev,
mpc8xxx_spi_write_reg(&reg_base->event, 0xffffffff);
/* Init eSPI CS mode register */
- for (i = 0; i < pdata->max_chipselect; i++)
- mpc8xxx_spi_write_reg(&reg_base->csmode[i], CSMODE_INIT_VAL);
+ for_each_available_child_of_node(master->dev.of_node, nc) {
+ /* get chip select */
+ prop = of_get_property(nc, "reg", &len);
+ if (!prop || len < sizeof(*prop))
+ continue;
+ i = be32_to_cpup(prop);
+ if (i < 0 || i >= pdata->max_chipselect)
+ continue;
+
+ csmode = CSMODE_INIT_VAL;
+ /* check if CSBEF is set in device tree */
+ prop = of_get_property(nc, "fsl,csbef", &len);
+ if (prop && len >= sizeof(*prop)) {
+ csmode &= ~(CSMODE_BEF(0xf));
+ csmode |= CSMODE_BEF(be32_to_cpup(prop));
+ }
+ /* check if CSAFT is set in device tree */
+ prop = of_get_property(nc, "fsl,csaft", &len);
+ if (prop && len >= sizeof(*prop)) {
+ csmode &= ~(CSMODE_AFT(0xf));
+ csmode |= CSMODE_AFT(be32_to_cpup(prop));
+ }
+ mpc8xxx_spi_write_reg(&reg_base->csmode[i], csmode);
+
+ dev_info(dev, "cs=%d, init_csmode=0x%x\n", i, csmode);
+ }
/* Enable SPI interface */
regval = pdata->initial_spmode | SPMODE_INIT_VAL | SPMODE_ENABLE;
diff --git a/drivers/spi/spi-fsl-lib.c b/drivers/spi/spi-fsl-lib.c
index e5d45fca3551..95212ea96c8d 100644
--- a/drivers/spi/spi-fsl-lib.c
+++ b/drivers/spi/spi-fsl-lib.c
@@ -99,11 +99,6 @@ int mpc8xxx_spi_transfer(struct spi_device *spi,
return 0;
}
-void mpc8xxx_spi_cleanup(struct spi_device *spi)
-{
- kfree(spi->controller_state);
-}
-
const char *mpc8xxx_spi_strmode(unsigned int flags)
{
if (flags & SPI_QE_CPU_MODE) {
@@ -134,7 +129,6 @@ int mpc8xxx_spi_probe(struct device *dev, struct resource *mem,
| SPI_LSB_FIRST | SPI_LOOP;
master->transfer = mpc8xxx_spi_transfer;
- master->cleanup = mpc8xxx_spi_cleanup;
master->dev.of_node = dev->of_node;
mpc8xxx_spi = spi_master_get_devdata(master);
diff --git a/drivers/spi/spi-fsl-lib.h b/drivers/spi/spi-fsl-lib.h
index 52db6936778e..2fcbfd01d109 100644
--- a/drivers/spi/spi-fsl-lib.h
+++ b/drivers/spi/spi-fsl-lib.h
@@ -124,7 +124,6 @@ extern struct mpc8xxx_spi_probe_info *to_of_pinfo(
extern int mpc8xxx_spi_bufs(struct mpc8xxx_spi *mspi,
struct spi_transfer *t, unsigned int len);
extern int mpc8xxx_spi_transfer(struct spi_device *spi, struct spi_message *m);
-extern void mpc8xxx_spi_cleanup(struct spi_device *spi);
extern const char *mpc8xxx_spi_strmode(unsigned int flags);
extern int mpc8xxx_spi_probe(struct device *dev, struct resource *mem,
unsigned int irq);
diff --git a/drivers/spi/spi-fsl-spi.c b/drivers/spi/spi-fsl-spi.c
index b3e7775034db..98ccd231bf00 100644
--- a/drivers/spi/spi-fsl-spi.c
+++ b/drivers/spi/spi-fsl-spi.c
@@ -431,7 +431,7 @@ static int fsl_spi_setup(struct spi_device *spi)
return -EINVAL;
if (!cs) {
- cs = kzalloc(sizeof *cs, GFP_KERNEL);
+ cs = devm_kzalloc(&spi->dev, sizeof(*cs), GFP_KERNEL);
if (!cs)
return -ENOMEM;
spi->controller_state = cs;
diff --git a/drivers/spi/spi-gpio.c b/drivers/spi/spi-gpio.c
index 09823076df88..9f595535cf27 100644
--- a/drivers/spi/spi-gpio.c
+++ b/drivers/spi/spi-gpio.c
@@ -340,7 +340,7 @@ done:
}
#ifdef CONFIG_OF
-static struct of_device_id spi_gpio_dt_ids[] = {
+static const struct of_device_id spi_gpio_dt_ids[] = {
{ .compatible = "spi-gpio" },
{}
};
diff --git a/drivers/spi/spi-nuc900.c b/drivers/spi/spi-nuc900.c
index 16e30de650b0..73e91d5a43df 100644
--- a/drivers/spi/spi-nuc900.c
+++ b/drivers/spi/spi-nuc900.c
@@ -10,7 +10,6 @@
#include <linux/module.h>
#include <linux/spinlock.h>
-#include <linux/workqueue.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/errno.h>
diff --git a/drivers/spi/spi-omap-uwire.c b/drivers/spi/spi-omap-uwire.c
index be2a2e108e2f..0f5a0aa3b871 100644
--- a/drivers/spi/spi-omap-uwire.c
+++ b/drivers/spi/spi-omap-uwire.c
@@ -37,7 +37,6 @@
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/platform_device.h>
-#include <linux/workqueue.h>
#include <linux/interrupt.h>
#include <linux/err.h>
#include <linux/clk.h>
diff --git a/drivers/spi/spi-pl022.c b/drivers/spi/spi-pl022.c
index 51d99779682f..66d2ae21e78e 100644
--- a/drivers/spi/spi-pl022.c
+++ b/drivers/spi/spi-pl022.c
@@ -1111,10 +1111,8 @@ static int pl022_dma_probe(struct pl022 *pl022)
}
pl022->dummypage = kmalloc(PAGE_SIZE, GFP_KERNEL);
- if (!pl022->dummypage) {
- dev_dbg(&pl022->adev->dev, "no DMA dummypage!\n");
+ if (!pl022->dummypage)
goto err_no_dummypage;
- }
dev_info(&pl022->adev->dev, "setup for DMA on RX %s, TX %s\n",
dma_chan_name(pl022->dma_rx_channel),
@@ -1809,11 +1807,8 @@ static int pl022_setup(struct spi_device *spi)
if (chip == NULL) {
chip = kzalloc(sizeof(struct chip_data), GFP_KERNEL);
- if (!chip) {
- dev_err(&spi->dev,
- "cannot allocate controller state\n");
+ if (!chip)
return -ENOMEM;
- }
dev_dbg(&spi->dev,
"allocated memory for controller's runtime state\n");
}
@@ -2050,10 +2045,8 @@ pl022_platform_data_dt_get(struct device *dev)
}
pd = devm_kzalloc(dev, sizeof(struct pl022_ssp_controller), GFP_KERNEL);
- if (!pd) {
- dev_err(dev, "cannot allocate platform data memory\n");
+ if (!pd)
return NULL;
- }
pd->bus_id = -1;
pd->enable_dma = 1;
diff --git a/drivers/spi/spi-pxa2xx-pci.c b/drivers/spi/spi-pxa2xx-pci.c
index 3f006d3ed2a8..c1865c92ccb9 100644
--- a/drivers/spi/spi-pxa2xx-pci.c
+++ b/drivers/spi/spi-pxa2xx-pci.c
@@ -8,7 +8,43 @@
#include <linux/module.h>
#include <linux/spi/pxa2xx_spi.h>
-static int ce4100_spi_probe(struct pci_dev *dev,
+enum {
+ PORT_CE4100,
+ PORT_BYT,
+};
+
+struct pxa_spi_info {
+ enum pxa_ssp_type type;
+ int port_id;
+ int num_chipselect;
+ int tx_slave_id;
+ int tx_chan_id;
+ int rx_slave_id;
+ int rx_chan_id;
+};
+
+static struct pxa_spi_info spi_info_configs[] = {
+ [PORT_CE4100] = {
+ .type = PXA25x_SSP,
+ .port_id = -1,
+ .num_chipselect = -1,
+ .tx_slave_id = -1,
+ .tx_chan_id = -1,
+ .rx_slave_id = -1,
+ .rx_chan_id = -1,
+ },
+ [PORT_BYT] = {
+ .type = LPSS_SSP,
+ .port_id = 0,
+ .num_chipselect = 1,
+ .tx_slave_id = 0,
+ .tx_chan_id = 0,
+ .rx_slave_id = 1,
+ .rx_chan_id = 1,
+ },
+};
+
+static int pxa2xx_spi_pci_probe(struct pci_dev *dev,
const struct pci_device_id *ent)
{
struct platform_device_info pi;
@@ -16,6 +52,7 @@ static int ce4100_spi_probe(struct pci_dev *dev,
struct platform_device *pdev;
struct pxa2xx_spi_master spi_pdata;
struct ssp_device *ssp;
+ struct pxa_spi_info *c;
ret = pcim_enable_device(dev);
if (ret)
@@ -25,8 +62,16 @@ static int ce4100_spi_probe(struct pci_dev *dev,
if (ret)
return ret;
+ c = &spi_info_configs[ent->driver_data];
+
memset(&spi_pdata, 0, sizeof(spi_pdata));
- spi_pdata.num_chipselect = dev->devfn;
+ spi_pdata.num_chipselect = (c->num_chipselect > 0) ?
+ c->num_chipselect : dev->devfn;
+ spi_pdata.tx_slave_id = c->tx_slave_id;
+ spi_pdata.tx_chan_id = c->tx_chan_id;
+ spi_pdata.rx_slave_id = c->rx_slave_id;
+ spi_pdata.rx_chan_id = c->rx_chan_id;
+ spi_pdata.enable_dma = c->rx_slave_id >= 0 && c->tx_slave_id >= 0;
ssp = &spi_pdata.ssp;
ssp->phys_base = pci_resource_start(dev, 0);
@@ -36,8 +81,8 @@ static int ce4100_spi_probe(struct pci_dev *dev,
return -EIO;
}
ssp->irq = dev->irq;
- ssp->port_id = dev->devfn;
- ssp->type = PXA25x_SSP;
+ ssp->port_id = (c->port_id >= 0) ? c->port_id : dev->devfn;
+ ssp->type = c->type;
memset(&pi, 0, sizeof(pi));
pi.parent = &dev->dev;
@@ -55,28 +100,29 @@ static int ce4100_spi_probe(struct pci_dev *dev,
return 0;
}
-static void ce4100_spi_remove(struct pci_dev *dev)
+static void pxa2xx_spi_pci_remove(struct pci_dev *dev)
{
struct platform_device *pdev = pci_get_drvdata(dev);
platform_device_unregister(pdev);
}
-static const struct pci_device_id ce4100_spi_devices[] = {
- { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x2e6a) },
+static const struct pci_device_id pxa2xx_spi_pci_devices[] = {
+ { PCI_VDEVICE(INTEL, 0x2e6a), PORT_CE4100 },
+ { PCI_VDEVICE(INTEL, 0x0f0e), PORT_BYT },
{ },
};
-MODULE_DEVICE_TABLE(pci, ce4100_spi_devices);
+MODULE_DEVICE_TABLE(pci, pxa2xx_spi_pci_devices);
-static struct pci_driver ce4100_spi_driver = {
- .name = "ce4100_spi",
- .id_table = ce4100_spi_devices,
- .probe = ce4100_spi_probe,
- .remove = ce4100_spi_remove,
+static struct pci_driver pxa2xx_spi_pci_driver = {
+ .name = "pxa2xx_spi_pci",
+ .id_table = pxa2xx_spi_pci_devices,
+ .probe = pxa2xx_spi_pci_probe,
+ .remove = pxa2xx_spi_pci_remove,
};
-module_pci_driver(ce4100_spi_driver);
+module_pci_driver(pxa2xx_spi_pci_driver);
-MODULE_DESCRIPTION("CE4100 PCI-SPI glue code for PXA's driver");
+MODULE_DESCRIPTION("CE4100/LPSS PCI-SPI glue code for PXA's driver");
MODULE_LICENSE("GPL v2");
MODULE_AUTHOR("Sebastian Andrzej Siewior <bigeasy@linutronix.de>");
diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c
index 41185d0557fa..a98df7eeb42d 100644
--- a/drivers/spi/spi-pxa2xx.c
+++ b/drivers/spi/spi-pxa2xx.c
@@ -27,7 +27,6 @@
#include <linux/platform_device.h>
#include <linux/spi/pxa2xx_spi.h>
#include <linux/spi/spi.h>
-#include <linux/workqueue.h>
#include <linux/delay.h>
#include <linux/gpio.h>
#include <linux/slab.h>
@@ -886,11 +885,8 @@ static int setup(struct spi_device *spi)
chip = spi_get_ctldata(spi);
if (!chip) {
chip = kzalloc(sizeof(struct chip_data), GFP_KERNEL);
- if (!chip) {
- dev_err(&spi->dev,
- "failed setup: can't allocate chip data\n");
+ if (!chip)
return -ENOMEM;
- }
if (drv_data->ssp_type == CE4100_SSP) {
if (spi->chip_select > 4) {
@@ -1037,11 +1033,8 @@ pxa2xx_spi_acpi_get_pdata(struct platform_device *pdev)
return NULL;
pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
- if (!pdata) {
- dev_err(&pdev->dev,
- "failed to allocate memory for platform data\n");
+ if (!pdata)
return NULL;
- }
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res)
@@ -1202,6 +1195,11 @@ static int pxa2xx_spi_probe(struct platform_device *pdev)
tasklet_init(&drv_data->pump_transfers, pump_transfers,
(unsigned long)drv_data);
+ pm_runtime_set_autosuspend_delay(&pdev->dev, 50);
+ pm_runtime_use_autosuspend(&pdev->dev);
+ pm_runtime_set_active(&pdev->dev);
+ pm_runtime_enable(&pdev->dev);
+
/* Register with the SPI framework */
platform_set_drvdata(pdev, drv_data);
status = devm_spi_register_master(&pdev->dev, master);
@@ -1210,11 +1208,6 @@ static int pxa2xx_spi_probe(struct platform_device *pdev)
goto out_error_clock_enabled;
}
- pm_runtime_set_autosuspend_delay(&pdev->dev, 50);
- pm_runtime_use_autosuspend(&pdev->dev);
- pm_runtime_set_active(&pdev->dev);
- pm_runtime_enable(&pdev->dev);
-
return status;
out_error_clock_enabled:
diff --git a/drivers/spi/spi-qup.c b/drivers/spi/spi-qup.c
index 78c66e3c53ed..fc1de86d3c8a 100644
--- a/drivers/spi/spi-qup.c
+++ b/drivers/spi/spi-qup.c
@@ -287,7 +287,7 @@ static irqreturn_t spi_qup_qup_irq(int irq, void *dev_id)
writel_relaxed(opflags, controller->base + QUP_OPERATIONAL);
if (!xfer) {
- dev_err_ratelimited(controller->dev, "unexpected irq %x08 %x08 %x08\n",
+ dev_err_ratelimited(controller->dev, "unexpected irq %08x %08x %08x\n",
qup_err, spi_err, opflags);
return IRQ_HANDLED;
}
@@ -366,7 +366,7 @@ static int spi_qup_io_config(struct spi_device *spi, struct spi_transfer *xfer)
n_words = xfer->len / w_size;
controller->w_size = w_size;
- if (n_words <= controller->in_fifo_sz) {
+ if (n_words <= (controller->in_fifo_sz / sizeof(u32))) {
mode = QUP_IO_M_MODE_FIFO;
writel_relaxed(n_words, controller->base + QUP_MX_READ_CNT);
writel_relaxed(n_words, controller->base + QUP_MX_WRITE_CNT);
@@ -749,7 +749,7 @@ static int spi_qup_remove(struct platform_device *pdev)
return 0;
}
-static struct of_device_id spi_qup_dt_match[] = {
+static const struct of_device_id spi_qup_dt_match[] = {
{ .compatible = "qcom,spi-qup-v2.1.1", },
{ .compatible = "qcom,spi-qup-v2.2.1", },
{ }
diff --git a/drivers/spi/spi-rspi.c b/drivers/spi/spi-rspi.c
index 1fb0ad213324..10112745bb17 100644
--- a/drivers/spi/spi-rspi.c
+++ b/drivers/spi/spi-rspi.c
@@ -183,8 +183,6 @@
#define SPBFCR_TXTRG_MASK 0x30 /* Transmit Buffer Data Triggering Number */
#define SPBFCR_RXTRG_MASK 0x07 /* Receive Buffer Data Triggering Number */
-#define DUMMY_DATA 0x00
-
struct rspi_data {
void __iomem *addr;
u32 max_speed_hz;
@@ -197,11 +195,6 @@ struct rspi_data {
int rx_irq, tx_irq;
const struct spi_ops *ops;
- /* for dmaengine */
- struct dma_chan *chan_tx;
- struct dma_chan *chan_rx;
-
- unsigned dma_width_16bit:1;
unsigned dma_callbacked:1;
unsigned byte_access:1;
};
@@ -253,6 +246,8 @@ struct spi_ops {
int (*transfer_one)(struct spi_master *master, struct spi_device *spi,
struct spi_transfer *xfer);
u16 mode_bits;
+ u16 flags;
+ u16 fifo_size;
};
/*
@@ -266,7 +261,8 @@ static int rspi_set_config_register(struct rspi_data *rspi, int access_size)
rspi_write8(rspi, rspi->sppcr, RSPI_SPPCR);
/* Sets transfer bit rate */
- spbr = clk_get_rate(rspi->clk) / (2 * rspi->max_speed_hz) - 1;
+ spbr = DIV_ROUND_UP(clk_get_rate(rspi->clk),
+ 2 * rspi->max_speed_hz) - 1;
rspi_write8(rspi, clamp(spbr, 0, 255), RSPI_SPBR);
/* Disable dummy transmission, set 16-bit word access, 1 frame */
@@ -302,7 +298,8 @@ static int rspi_rz_set_config_register(struct rspi_data *rspi, int access_size)
rspi_write8(rspi, rspi->sppcr, RSPI_SPPCR);
/* Sets transfer bit rate */
- spbr = clk_get_rate(rspi->clk) / (2 * rspi->max_speed_hz) - 1;
+ spbr = DIV_ROUND_UP(clk_get_rate(rspi->clk),
+ 2 * rspi->max_speed_hz) - 1;
rspi_write8(rspi, clamp(spbr, 0, 255), RSPI_SPBR);
/* Disable dummy transmission, set byte access */
@@ -335,7 +332,7 @@ static int qspi_set_config_register(struct rspi_data *rspi, int access_size)
rspi_write8(rspi, rspi->sppcr, RSPI_SPPCR);
/* Sets transfer bit rate */
- spbr = clk_get_rate(rspi->clk) / (2 * rspi->max_speed_hz);
+ spbr = DIV_ROUND_UP(clk_get_rate(rspi->clk), 2 * rspi->max_speed_hz);
rspi_write8(rspi, clamp(spbr, 0, 255), RSPI_SPBR);
/* Disable dummy transmission, set byte access */
@@ -403,11 +400,22 @@ static int rspi_wait_for_interrupt(struct rspi_data *rspi, u8 wait_mask,
return 0;
}
+static inline int rspi_wait_for_tx_empty(struct rspi_data *rspi)
+{
+ return rspi_wait_for_interrupt(rspi, SPSR_SPTEF, SPCR_SPTIE);
+}
+
+static inline int rspi_wait_for_rx_full(struct rspi_data *rspi)
+{
+ return rspi_wait_for_interrupt(rspi, SPSR_SPRF, SPCR_SPRIE);
+}
+
static int rspi_data_out(struct rspi_data *rspi, u8 data)
{
- if (rspi_wait_for_interrupt(rspi, SPSR_SPTEF, SPCR_SPTIE) < 0) {
+ int error = rspi_wait_for_tx_empty(rspi);
+ if (error < 0) {
dev_err(&rspi->master->dev, "transmit timeout\n");
- return -ETIMEDOUT;
+ return error;
}
rspi_write_data(rspi, data);
return 0;
@@ -415,25 +423,36 @@ static int rspi_data_out(struct rspi_data *rspi, u8 data)
static int rspi_data_in(struct rspi_data *rspi)
{
+ int error;
u8 data;
- if (rspi_wait_for_interrupt(rspi, SPSR_SPRF, SPCR_SPRIE) < 0) {
+ error = rspi_wait_for_rx_full(rspi);
+ if (error < 0) {
dev_err(&rspi->master->dev, "receive timeout\n");
- return -ETIMEDOUT;
+ return error;
}
data = rspi_read_data(rspi);
return data;
}
-static int rspi_data_out_in(struct rspi_data *rspi, u8 data)
+static int rspi_pio_transfer(struct rspi_data *rspi, const u8 *tx, u8 *rx,
+ unsigned int n)
{
- int ret;
-
- ret = rspi_data_out(rspi, data);
- if (ret < 0)
- return ret;
+ while (n-- > 0) {
+ if (tx) {
+ int ret = rspi_data_out(rspi, *tx++);
+ if (ret < 0)
+ return ret;
+ }
+ if (rx) {
+ int ret = rspi_data_in(rspi);
+ if (ret < 0)
+ return ret;
+ *rx++ = ret;
+ }
+ }
- return rspi_data_in(rspi);
+ return 0;
}
static void rspi_dma_complete(void *arg)
@@ -444,97 +463,67 @@ static void rspi_dma_complete(void *arg)
wake_up_interruptible(&rspi->wait);
}
-static int rspi_dma_map_sg(struct scatterlist *sg, const void *buf,
- unsigned len, struct dma_chan *chan,
- enum dma_transfer_direction dir)
-{
- sg_init_table(sg, 1);
- sg_set_buf(sg, buf, len);
- sg_dma_len(sg) = len;
- return dma_map_sg(chan->device->dev, sg, 1, dir);
-}
-
-static void rspi_dma_unmap_sg(struct scatterlist *sg, struct dma_chan *chan,
- enum dma_transfer_direction dir)
+static int rspi_dma_transfer(struct rspi_data *rspi, struct sg_table *tx,
+ struct sg_table *rx)
{
- dma_unmap_sg(chan->device->dev, sg, 1, dir);
-}
-
-static void rspi_memory_to_8bit(void *buf, const void *data, unsigned len)
-{
- u16 *dst = buf;
- const u8 *src = data;
-
- while (len) {
- *dst++ = (u16)(*src++);
- len--;
- }
-}
-
-static void rspi_memory_from_8bit(void *buf, const void *data, unsigned len)
-{
- u8 *dst = buf;
- const u16 *src = data;
-
- while (len) {
- *dst++ = (u8)*src++;
- len--;
- }
-}
+ struct dma_async_tx_descriptor *desc_tx = NULL, *desc_rx = NULL;
+ u8 irq_mask = 0;
+ unsigned int other_irq = 0;
+ dma_cookie_t cookie;
+ int ret;
-static int rspi_send_dma(struct rspi_data *rspi, struct spi_transfer *t)
-{
- struct scatterlist sg;
- const void *buf = NULL;
- struct dma_async_tx_descriptor *desc;
- unsigned int len;
- int ret = 0;
-
- if (rspi->dma_width_16bit) {
- void *tmp;
- /*
- * If DMAC bus width is 16-bit, the driver allocates a dummy
- * buffer. And, the driver converts original data into the
- * DMAC data as the following format:
- * original data: 1st byte, 2nd byte ...
- * DMAC data: 1st byte, dummy, 2nd byte, dummy ...
- */
- len = t->len * 2;
- tmp = kmalloc(len, GFP_KERNEL);
- if (!tmp)
- return -ENOMEM;
- rspi_memory_to_8bit(tmp, t->tx_buf, t->len);
- buf = tmp;
- } else {
- len = t->len;
- buf = t->tx_buf;
- }
+ if (tx) {
+ desc_tx = dmaengine_prep_slave_sg(rspi->master->dma_tx,
+ tx->sgl, tx->nents, DMA_TO_DEVICE,
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+ if (!desc_tx)
+ return -EIO;
- if (!rspi_dma_map_sg(&sg, buf, len, rspi->chan_tx, DMA_TO_DEVICE)) {
- ret = -EFAULT;
- goto end_nomap;
+ irq_mask |= SPCR_SPTIE;
}
- desc = dmaengine_prep_slave_sg(rspi->chan_tx, &sg, 1, DMA_TO_DEVICE,
- DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
- if (!desc) {
- ret = -EIO;
- goto end;
+ if (rx) {
+ desc_rx = dmaengine_prep_slave_sg(rspi->master->dma_rx,
+ rx->sgl, rx->nents, DMA_FROM_DEVICE,
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+ if (!desc_rx)
+ return -EIO;
+
+ irq_mask |= SPCR_SPRIE;
}
/*
- * DMAC needs SPTIE, but if SPTIE is set, this IRQ routine will be
+ * DMAC needs SPxIE, but if SPxIE is set, the IRQ routine will be
* called. So, this driver disables the IRQ while DMA transfer.
*/
- disable_irq(rspi->tx_irq);
+ if (tx)
+ disable_irq(other_irq = rspi->tx_irq);
+ if (rx && rspi->rx_irq != other_irq)
+ disable_irq(rspi->rx_irq);
- rspi_write8(rspi, rspi_read8(rspi, RSPI_SPCR) | SPCR_TXMD, RSPI_SPCR);
- rspi_enable_irq(rspi, SPCR_SPTIE);
+ rspi_enable_irq(rspi, irq_mask);
rspi->dma_callbacked = 0;
- desc->callback = rspi_dma_complete;
- desc->callback_param = rspi;
- dmaengine_submit(desc);
- dma_async_issue_pending(rspi->chan_tx);
+ if (rx) {
+ desc_rx->callback = rspi_dma_complete;
+ desc_rx->callback_param = rspi;
+ cookie = dmaengine_submit(desc_rx);
+ if (dma_submit_error(cookie))
+ return cookie;
+ dma_async_issue_pending(rspi->master->dma_rx);
+ }
+ if (tx) {
+ if (rx) {
+ /* No callback */
+ desc_tx->callback = NULL;
+ } else {
+ desc_tx->callback = rspi_dma_complete;
+ desc_tx->callback_param = rspi;
+ }
+ cookie = dmaengine_submit(desc_tx);
+ if (dma_submit_error(cookie))
+ return cookie;
+ dma_async_issue_pending(rspi->master->dma_tx);
+ }
ret = wait_event_interruptible_timeout(rspi->wait,
rspi->dma_callbacked, HZ);
@@ -542,15 +531,13 @@ static int rspi_send_dma(struct rspi_data *rspi, struct spi_transfer *t)
ret = 0;
else if (!ret)
ret = -ETIMEDOUT;
- rspi_disable_irq(rspi, SPCR_SPTIE);
- enable_irq(rspi->tx_irq);
+ rspi_disable_irq(rspi, irq_mask);
-end:
- rspi_dma_unmap_sg(&sg, rspi->chan_tx, DMA_TO_DEVICE);
-end_nomap:
- if (rspi->dma_width_16bit)
- kfree(buf);
+ if (tx)
+ enable_irq(rspi->tx_irq);
+ if (rx && rspi->rx_irq != other_irq)
+ enable_irq(rspi->rx_irq);
return ret;
}
@@ -585,157 +572,37 @@ static void qspi_receive_init(const struct rspi_data *rspi)
rspi_write8(rspi, 0, QSPI_SPBFCR);
}
-static int rspi_receive_dma(struct rspi_data *rspi, struct spi_transfer *t)
+static bool __rspi_can_dma(const struct rspi_data *rspi,
+ const struct spi_transfer *xfer)
{
- struct scatterlist sg, sg_dummy;
- void *dummy = NULL, *rx_buf = NULL;
- struct dma_async_tx_descriptor *desc, *desc_dummy;
- unsigned int len;
- int ret = 0;
-
- if (rspi->dma_width_16bit) {
- /*
- * If DMAC bus width is 16-bit, the driver allocates a dummy
- * buffer. And, finally the driver converts the DMAC data into
- * actual data as the following format:
- * DMAC data: 1st byte, dummy, 2nd byte, dummy ...
- * actual data: 1st byte, 2nd byte ...
- */
- len = t->len * 2;
- rx_buf = kmalloc(len, GFP_KERNEL);
- if (!rx_buf)
- return -ENOMEM;
- } else {
- len = t->len;
- rx_buf = t->rx_buf;
- }
-
- /* prepare dummy transfer to generate SPI clocks */
- dummy = kzalloc(len, GFP_KERNEL);
- if (!dummy) {
- ret = -ENOMEM;
- goto end_nomap;
- }
- if (!rspi_dma_map_sg(&sg_dummy, dummy, len, rspi->chan_tx,
- DMA_TO_DEVICE)) {
- ret = -EFAULT;
- goto end_nomap;
- }
- desc_dummy = dmaengine_prep_slave_sg(rspi->chan_tx, &sg_dummy, 1,
- DMA_TO_DEVICE, DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
- if (!desc_dummy) {
- ret = -EIO;
- goto end_dummy_mapped;
- }
-
- /* prepare receive transfer */
- if (!rspi_dma_map_sg(&sg, rx_buf, len, rspi->chan_rx,
- DMA_FROM_DEVICE)) {
- ret = -EFAULT;
- goto end_dummy_mapped;
-
- }
- desc = dmaengine_prep_slave_sg(rspi->chan_rx, &sg, 1, DMA_FROM_DEVICE,
- DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
- if (!desc) {
- ret = -EIO;
- goto end;
- }
-
- rspi_receive_init(rspi);
-
- /*
- * DMAC needs SPTIE, but if SPTIE is set, this IRQ routine will be
- * called. So, this driver disables the IRQ while DMA transfer.
- */
- disable_irq(rspi->tx_irq);
- if (rspi->rx_irq != rspi->tx_irq)
- disable_irq(rspi->rx_irq);
-
- rspi_write8(rspi, rspi_read8(rspi, RSPI_SPCR) & ~SPCR_TXMD, RSPI_SPCR);
- rspi_enable_irq(rspi, SPCR_SPTIE | SPCR_SPRIE);
- rspi->dma_callbacked = 0;
-
- desc->callback = rspi_dma_complete;
- desc->callback_param = rspi;
- dmaengine_submit(desc);
- dma_async_issue_pending(rspi->chan_rx);
-
- desc_dummy->callback = NULL; /* No callback */
- dmaengine_submit(desc_dummy);
- dma_async_issue_pending(rspi->chan_tx);
-
- ret = wait_event_interruptible_timeout(rspi->wait,
- rspi->dma_callbacked, HZ);
- if (ret > 0 && rspi->dma_callbacked)
- ret = 0;
- else if (!ret)
- ret = -ETIMEDOUT;
- rspi_disable_irq(rspi, SPCR_SPTIE | SPCR_SPRIE);
-
- enable_irq(rspi->tx_irq);
- if (rspi->rx_irq != rspi->tx_irq)
- enable_irq(rspi->rx_irq);
-
-end:
- rspi_dma_unmap_sg(&sg, rspi->chan_rx, DMA_FROM_DEVICE);
-end_dummy_mapped:
- rspi_dma_unmap_sg(&sg_dummy, rspi->chan_tx, DMA_TO_DEVICE);
-end_nomap:
- if (rspi->dma_width_16bit) {
- if (!ret)
- rspi_memory_from_8bit(t->rx_buf, rx_buf, t->len);
- kfree(rx_buf);
- }
- kfree(dummy);
-
- return ret;
+ return xfer->len > rspi->ops->fifo_size;
}
-static int rspi_is_dma(const struct rspi_data *rspi, struct spi_transfer *t)
+static bool rspi_can_dma(struct spi_master *master, struct spi_device *spi,
+ struct spi_transfer *xfer)
{
- if (t->tx_buf && rspi->chan_tx)
- return 1;
- /* If the module receives data by DMAC, it also needs TX DMAC */
- if (t->rx_buf && rspi->chan_tx && rspi->chan_rx)
- return 1;
+ struct rspi_data *rspi = spi_master_get_devdata(master);
- return 0;
+ return __rspi_can_dma(rspi, xfer);
}
-static int rspi_transfer_out_in(struct rspi_data *rspi,
+static int rspi_common_transfer(struct rspi_data *rspi,
struct spi_transfer *xfer)
{
- int remain = xfer->len, ret;
- const u8 *tx_buf = xfer->tx_buf;
- u8 *rx_buf = xfer->rx_buf;
- u8 spcr, data;
-
- rspi_receive_init(rspi);
-
- spcr = rspi_read8(rspi, RSPI_SPCR);
- if (rx_buf)
- spcr &= ~SPCR_TXMD;
- else
- spcr |= SPCR_TXMD;
- rspi_write8(rspi, spcr, RSPI_SPCR);
+ int ret;
- while (remain > 0) {
- data = tx_buf ? *tx_buf++ : DUMMY_DATA;
- ret = rspi_data_out(rspi, data);
- if (ret < 0)
- return ret;
- if (rx_buf) {
- ret = rspi_data_in(rspi);
- if (ret < 0)
- return ret;
- *rx_buf++ = ret;
- }
- remain--;
+ if (rspi->master->can_dma && __rspi_can_dma(rspi, xfer)) {
+ /* rx_buf can be NULL on RSPI on SH in TX-only Mode */
+ return rspi_dma_transfer(rspi, &xfer->tx_sg,
+ xfer->rx_buf ? &xfer->rx_sg : NULL);
}
+ ret = rspi_pio_transfer(rspi, xfer->tx_buf, xfer->rx_buf, xfer->len);
+ if (ret < 0)
+ return ret;
+
/* Wait for the last transmission */
- rspi_wait_for_interrupt(rspi, SPSR_SPTEF, SPCR_SPTIE);
+ rspi_wait_for_tx_empty(rspi);
return 0;
}
@@ -744,46 +611,18 @@ static int rspi_transfer_one(struct spi_master *master, struct spi_device *spi,
struct spi_transfer *xfer)
{
struct rspi_data *rspi = spi_master_get_devdata(master);
- int ret;
+ u8 spcr;
- if (!rspi_is_dma(rspi, xfer))
- return rspi_transfer_out_in(rspi, xfer);
-
- if (xfer->tx_buf) {
- ret = rspi_send_dma(rspi, xfer);
- if (ret < 0)
- return ret;
- }
- if (xfer->rx_buf)
- return rspi_receive_dma(rspi, xfer);
-
- return 0;
-}
-
-static int rspi_rz_transfer_out_in(struct rspi_data *rspi,
- struct spi_transfer *xfer)
-{
- int remain = xfer->len, ret;
- const u8 *tx_buf = xfer->tx_buf;
- u8 *rx_buf = xfer->rx_buf;
- u8 data;
-
- rspi_rz_receive_init(rspi);
-
- while (remain > 0) {
- data = tx_buf ? *tx_buf++ : DUMMY_DATA;
- ret = rspi_data_out_in(rspi, data);
- if (ret < 0)
- return ret;
- if (rx_buf)
- *rx_buf++ = ret;
- remain--;
+ spcr = rspi_read8(rspi, RSPI_SPCR);
+ if (xfer->rx_buf) {
+ rspi_receive_init(rspi);
+ spcr &= ~SPCR_TXMD;
+ } else {
+ spcr |= SPCR_TXMD;
}
+ rspi_write8(rspi, spcr, RSPI_SPCR);
- /* Wait for the last transmission */
- rspi_wait_for_interrupt(rspi, SPSR_SPTEF, SPCR_SPTIE);
-
- return 0;
+ return rspi_common_transfer(rspi, xfer);
}
static int rspi_rz_transfer_one(struct spi_master *master,
@@ -791,68 +630,44 @@ static int rspi_rz_transfer_one(struct spi_master *master,
struct spi_transfer *xfer)
{
struct rspi_data *rspi = spi_master_get_devdata(master);
+ int ret;
- return rspi_rz_transfer_out_in(rspi, xfer);
+ rspi_rz_receive_init(rspi);
+
+ return rspi_common_transfer(rspi, xfer);
}
static int qspi_transfer_out_in(struct rspi_data *rspi,
struct spi_transfer *xfer)
{
- int remain = xfer->len, ret;
- const u8 *tx_buf = xfer->tx_buf;
- u8 *rx_buf = xfer->rx_buf;
- u8 data;
-
qspi_receive_init(rspi);
- while (remain > 0) {
- data = tx_buf ? *tx_buf++ : DUMMY_DATA;
- ret = rspi_data_out_in(rspi, data);
- if (ret < 0)
- return ret;
- if (rx_buf)
- *rx_buf++ = ret;
- remain--;
- }
-
- /* Wait for the last transmission */
- rspi_wait_for_interrupt(rspi, SPSR_SPTEF, SPCR_SPTIE);
-
- return 0;
+ return rspi_common_transfer(rspi, xfer);
}
static int qspi_transfer_out(struct rspi_data *rspi, struct spi_transfer *xfer)
{
- const u8 *buf = xfer->tx_buf;
- unsigned int i;
int ret;
- for (i = 0; i < xfer->len; i++) {
- ret = rspi_data_out(rspi, *buf++);
- if (ret < 0)
- return ret;
- }
+ if (rspi->master->can_dma && __rspi_can_dma(rspi, xfer))
+ return rspi_dma_transfer(rspi, &xfer->tx_sg, NULL);
+
+ ret = rspi_pio_transfer(rspi, xfer->tx_buf, NULL, xfer->len);
+ if (ret < 0)
+ return ret;
/* Wait for the last transmission */
- rspi_wait_for_interrupt(rspi, SPSR_SPTEF, SPCR_SPTIE);
+ rspi_wait_for_tx_empty(rspi);
return 0;
}
static int qspi_transfer_in(struct rspi_data *rspi, struct spi_transfer *xfer)
{
- u8 *buf = xfer->rx_buf;
- unsigned int i;
- int ret;
-
- for (i = 0; i < xfer->len; i++) {
- ret = rspi_data_in(rspi);
- if (ret < 0)
- return ret;
- *buf++ = ret;
- }
+ if (rspi->master->can_dma && __rspi_can_dma(rspi, xfer))
+ return rspi_dma_transfer(rspi, NULL, &xfer->rx_sg);
- return 0;
+ return rspi_pio_transfer(rspi, NULL, xfer->rx_buf, xfer->len);
}
static int qspi_transfer_one(struct spi_master *master, struct spi_device *spi,
@@ -862,10 +677,10 @@ static int qspi_transfer_one(struct spi_master *master, struct spi_device *spi,
if (spi->mode & SPI_LOOP) {
return qspi_transfer_out_in(rspi, xfer);
- } else if (xfer->tx_buf && xfer->tx_nbits > SPI_NBITS_SINGLE) {
+ } else if (xfer->tx_nbits > SPI_NBITS_SINGLE) {
/* Quad or Dual SPI Write */
return qspi_transfer_out(rspi, xfer);
- } else if (xfer->rx_buf && xfer->rx_nbits > SPI_NBITS_SINGLE) {
+ } else if (xfer->rx_nbits > SPI_NBITS_SINGLE) {
/* Quad or Dual SPI Read */
return qspi_transfer_in(rspi, xfer);
} else {
@@ -1046,65 +861,78 @@ static irqreturn_t rspi_irq_tx(int irq, void *_sr)
return 0;
}
-static int rspi_request_dma(struct rspi_data *rspi,
- struct platform_device *pdev)
+static struct dma_chan *rspi_request_dma_chan(struct device *dev,
+ enum dma_transfer_direction dir,
+ unsigned int id,
+ dma_addr_t port_addr)
{
- const struct rspi_plat_data *rspi_pd = dev_get_platdata(&pdev->dev);
- struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
dma_cap_mask_t mask;
+ struct dma_chan *chan;
struct dma_slave_config cfg;
int ret;
- if (!res || !rspi_pd)
- return 0; /* The driver assumes no error. */
+ dma_cap_zero(mask);
+ dma_cap_set(DMA_SLAVE, mask);
- rspi->dma_width_16bit = rspi_pd->dma_width_16bit;
-
- /* If the module receives data by DMAC, it also needs TX DMAC */
- if (rspi_pd->dma_rx_id && rspi_pd->dma_tx_id) {
- dma_cap_zero(mask);
- dma_cap_set(DMA_SLAVE, mask);
- rspi->chan_rx = dma_request_channel(mask, shdma_chan_filter,
- (void *)rspi_pd->dma_rx_id);
- if (rspi->chan_rx) {
- cfg.slave_id = rspi_pd->dma_rx_id;
- cfg.direction = DMA_DEV_TO_MEM;
- cfg.dst_addr = 0;
- cfg.src_addr = res->start + RSPI_SPDR;
- ret = dmaengine_slave_config(rspi->chan_rx, &cfg);
- if (!ret)
- dev_info(&pdev->dev, "Use DMA when rx.\n");
- else
- return ret;
- }
+ chan = dma_request_channel(mask, shdma_chan_filter,
+ (void *)(unsigned long)id);
+ if (!chan) {
+ dev_warn(dev, "dma_request_channel failed\n");
+ return NULL;
}
- if (rspi_pd->dma_tx_id) {
- dma_cap_zero(mask);
- dma_cap_set(DMA_SLAVE, mask);
- rspi->chan_tx = dma_request_channel(mask, shdma_chan_filter,
- (void *)rspi_pd->dma_tx_id);
- if (rspi->chan_tx) {
- cfg.slave_id = rspi_pd->dma_tx_id;
- cfg.direction = DMA_MEM_TO_DEV;
- cfg.dst_addr = res->start + RSPI_SPDR;
- cfg.src_addr = 0;
- ret = dmaengine_slave_config(rspi->chan_tx, &cfg);
- if (!ret)
- dev_info(&pdev->dev, "Use DMA when tx\n");
- else
- return ret;
- }
+
+ memset(&cfg, 0, sizeof(cfg));
+ cfg.slave_id = id;
+ cfg.direction = dir;
+ if (dir == DMA_MEM_TO_DEV)
+ cfg.dst_addr = port_addr;
+ else
+ cfg.src_addr = port_addr;
+
+ ret = dmaengine_slave_config(chan, &cfg);
+ if (ret) {
+ dev_warn(dev, "dmaengine_slave_config failed %d\n", ret);
+ dma_release_channel(chan);
+ return NULL;
}
+ return chan;
+}
+
+static int rspi_request_dma(struct device *dev, struct spi_master *master,
+ const struct resource *res)
+{
+ const struct rspi_plat_data *rspi_pd = dev_get_platdata(dev);
+
+ if (!rspi_pd || !rspi_pd->dma_rx_id || !rspi_pd->dma_tx_id)
+ return 0; /* The driver assumes no error. */
+
+ master->dma_rx = rspi_request_dma_chan(dev, DMA_DEV_TO_MEM,
+ rspi_pd->dma_rx_id,
+ res->start + RSPI_SPDR);
+ if (!master->dma_rx)
+ return -ENODEV;
+
+ master->dma_tx = rspi_request_dma_chan(dev, DMA_MEM_TO_DEV,
+ rspi_pd->dma_tx_id,
+ res->start + RSPI_SPDR);
+ if (!master->dma_tx) {
+ dma_release_channel(master->dma_rx);
+ master->dma_rx = NULL;
+ return -ENODEV;
+ }
+
+ master->can_dma = rspi_can_dma;
+ dev_info(dev, "DMA available");
return 0;
}
static void rspi_release_dma(struct rspi_data *rspi)
{
- if (rspi->chan_tx)
- dma_release_channel(rspi->chan_tx);
- if (rspi->chan_rx)
- dma_release_channel(rspi->chan_rx);
+ if (rspi->master->dma_tx)
+ dma_release_channel(rspi->master->dma_tx);
+ if (rspi->master->dma_rx)
+ dma_release_channel(rspi->master->dma_rx);
}
static int rspi_remove(struct platform_device *pdev)
@@ -1118,23 +946,29 @@ static int rspi_remove(struct platform_device *pdev)
}
static const struct spi_ops rspi_ops = {
- .set_config_register = rspi_set_config_register,
- .transfer_one = rspi_transfer_one,
- .mode_bits = SPI_CPHA | SPI_CPOL | SPI_LOOP,
+ .set_config_register = rspi_set_config_register,
+ .transfer_one = rspi_transfer_one,
+ .mode_bits = SPI_CPHA | SPI_CPOL | SPI_LOOP,
+ .flags = SPI_MASTER_MUST_TX,
+ .fifo_size = 8,
};
static const struct spi_ops rspi_rz_ops = {
- .set_config_register = rspi_rz_set_config_register,
- .transfer_one = rspi_rz_transfer_one,
- .mode_bits = SPI_CPHA | SPI_CPOL | SPI_LOOP,
+ .set_config_register = rspi_rz_set_config_register,
+ .transfer_one = rspi_rz_transfer_one,
+ .mode_bits = SPI_CPHA | SPI_CPOL | SPI_LOOP,
+ .flags = SPI_MASTER_MUST_RX | SPI_MASTER_MUST_TX,
+ .fifo_size = 8, /* 8 for TX, 32 for RX */
};
static const struct spi_ops qspi_ops = {
- .set_config_register = qspi_set_config_register,
- .transfer_one = qspi_transfer_one,
- .mode_bits = SPI_CPHA | SPI_CPOL | SPI_LOOP |
- SPI_TX_DUAL | SPI_TX_QUAD |
- SPI_RX_DUAL | SPI_RX_QUAD,
+ .set_config_register = qspi_set_config_register,
+ .transfer_one = qspi_transfer_one,
+ .mode_bits = SPI_CPHA | SPI_CPOL | SPI_LOOP |
+ SPI_TX_DUAL | SPI_TX_QUAD |
+ SPI_RX_DUAL | SPI_RX_QUAD,
+ .flags = SPI_MASTER_MUST_RX | SPI_MASTER_MUST_TX,
+ .fifo_size = 32,
};
#ifdef CONFIG_OF
@@ -1254,6 +1088,7 @@ static int rspi_probe(struct platform_device *pdev)
master->prepare_message = rspi_prepare_message;
master->unprepare_message = rspi_unprepare_message;
master->mode_bits = ops->mode_bits;
+ master->flags = ops->flags;
master->dev.of_node = pdev->dev.of_node;
ret = platform_get_irq_byname(pdev, "rx");
@@ -1291,11 +1126,9 @@ static int rspi_probe(struct platform_device *pdev)
goto error2;
}
- ret = rspi_request_dma(rspi, pdev);
- if (ret < 0) {
- dev_err(&pdev->dev, "rspi_request_dma failed.\n");
- goto error3;
- }
+ ret = rspi_request_dma(&pdev->dev, master, res);
+ if (ret < 0)
+ dev_warn(&pdev->dev, "DMA not available, using PIO\n");
ret = devm_spi_register_master(&pdev->dev, master);
if (ret < 0) {
diff --git a/drivers/spi/spi-s3c24xx.c b/drivers/spi/spi-s3c24xx.c
index bed23384dfab..e713737d784f 100644
--- a/drivers/spi/spi-s3c24xx.c
+++ b/drivers/spi/spi-s3c24xx.c
@@ -10,7 +10,6 @@
*/
#include <linux/spinlock.h>
-#include <linux/workqueue.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/errno.h>
@@ -183,11 +182,11 @@ static int s3c24xx_spi_setup(struct spi_device *spi)
/* allocate settings on the first call */
if (!cs) {
- cs = kzalloc(sizeof(struct s3c24xx_spi_devstate), GFP_KERNEL);
- if (!cs) {
- dev_err(&spi->dev, "no memory for controller state\n");
+ cs = devm_kzalloc(&spi->dev,
+ sizeof(struct s3c24xx_spi_devstate),
+ GFP_KERNEL);
+ if (!cs)
return -ENOMEM;
- }
cs->spcon = SPCON_DEFAULT;
cs->hz = -1;
@@ -209,11 +208,6 @@ static int s3c24xx_spi_setup(struct spi_device *spi)
return 0;
}
-static void s3c24xx_spi_cleanup(struct spi_device *spi)
-{
- kfree(spi->controller_state);
-}
-
static inline unsigned int hw_txbyte(struct s3c24xx_spi *hw, int count)
{
return hw->tx ? hw->tx[count] : 0;
@@ -543,7 +537,6 @@ static int s3c24xx_spi_probe(struct platform_device *pdev)
hw->bitbang.txrx_bufs = s3c24xx_spi_txrx;
hw->master->setup = s3c24xx_spi_setup;
- hw->master->cleanup = s3c24xx_spi_cleanup;
dev_dbg(hw->dev, "bitbang at %p\n", &hw->bitbang);
diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c
index f19cd97855e8..75a56968b14c 100644
--- a/drivers/spi/spi-s3c64xx.c
+++ b/drivers/spi/spi-s3c64xx.c
@@ -19,7 +19,6 @@
#include <linux/init.h>
#include <linux/module.h>
-#include <linux/workqueue.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/clk.h>
@@ -773,7 +772,6 @@ static struct s3c64xx_spi_csinfo *s3c64xx_get_slave_ctrldata(
cs = kzalloc(sizeof(*cs), GFP_KERNEL);
if (!cs) {
- dev_err(&spi->dev, "could not allocate memory for controller data\n");
of_node_put(data_np);
return ERR_PTR(-ENOMEM);
}
@@ -987,10 +985,8 @@ static struct s3c64xx_spi_info *s3c64xx_spi_parse_dt(struct device *dev)
u32 temp;
sci = devm_kzalloc(dev, sizeof(*sci), GFP_KERNEL);
- if (!sci) {
- dev_err(dev, "memory allocation for spi_info failed\n");
+ if (!sci)
return ERR_PTR(-ENOMEM);
- }
if (of_property_read_u32(dev->of_node, "samsung,spi-src-clk", &temp)) {
dev_warn(dev, "spi bus clock parent not specified, using clock at index 0 as parent\n");
diff --git a/drivers/spi/spi-sh-msiof.c b/drivers/spi/spi-sh-msiof.c
index e850d03e7190..45b09142afe2 100644
--- a/drivers/spi/spi-sh-msiof.c
+++ b/drivers/spi/spi-sh-msiof.c
@@ -642,10 +642,8 @@ static struct sh_msiof_spi_info *sh_msiof_spi_parse_dt(struct device *dev)
u32 num_cs = 1;
info = devm_kzalloc(dev, sizeof(struct sh_msiof_spi_info), GFP_KERNEL);
- if (!info) {
- dev_err(dev, "failed to allocate setup data\n");
+ if (!info)
return NULL;
- }
/* Parse the MSIOF properties */
of_property_read_u32(np, "num-cs", &num_cs);
diff --git a/drivers/spi/spi-sh-sci.c b/drivers/spi/spi-sh-sci.c
index 8b44b71f5024..1f56ef651d1a 100644
--- a/drivers/spi/spi-sh-sci.c
+++ b/drivers/spi/spi-sh-sci.c
@@ -16,7 +16,6 @@
#include <linux/kernel.h>
#include <linux/delay.h>
#include <linux/spinlock.h>
-#include <linux/workqueue.h>
#include <linux/platform_device.h>
#include <linux/spi/spi.h>
diff --git a/drivers/spi/spi-sirf.c b/drivers/spi/spi-sirf.c
index 67d8909dcf39..95ac276eaafe 100644
--- a/drivers/spi/spi-sirf.c
+++ b/drivers/spi/spi-sirf.c
@@ -10,6 +10,7 @@
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/clk.h>
+#include <linux/completion.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/of.h>
@@ -85,6 +86,7 @@
#define SIRFSOC_SPI_TX_DONE BIT(1)
#define SIRFSOC_SPI_RX_OFLOW BIT(2)
#define SIRFSOC_SPI_TX_UFLOW BIT(3)
+#define SIRFSOC_SPI_RX_IO_DMA BIT(4)
#define SIRFSOC_SPI_RX_FIFO_FULL BIT(6)
#define SIRFSOC_SPI_TXFIFO_EMPTY BIT(7)
#define SIRFSOC_SPI_RXFIFO_THD_REACH BIT(8)
@@ -264,41 +266,34 @@ static irqreturn_t spi_sirfsoc_irq(int irq, void *dev_id)
{
struct sirfsoc_spi *sspi = dev_id;
u32 spi_stat = readl(sspi->base + SIRFSOC_SPI_INT_STATUS);
-
- writel(spi_stat, sspi->base + SIRFSOC_SPI_INT_STATUS);
-
if (sspi->tx_by_cmd && (spi_stat & SIRFSOC_SPI_FRM_END)) {
complete(&sspi->tx_done);
writel(0x0, sspi->base + SIRFSOC_SPI_INT_EN);
+ writel(SIRFSOC_SPI_INT_MASK_ALL,
+ sspi->base + SIRFSOC_SPI_INT_STATUS);
return IRQ_HANDLED;
}
/* Error Conditions */
if (spi_stat & SIRFSOC_SPI_RX_OFLOW ||
spi_stat & SIRFSOC_SPI_TX_UFLOW) {
+ complete(&sspi->tx_done);
complete(&sspi->rx_done);
writel(0x0, sspi->base + SIRFSOC_SPI_INT_EN);
+ writel(SIRFSOC_SPI_INT_MASK_ALL,
+ sspi->base + SIRFSOC_SPI_INT_STATUS);
+ return IRQ_HANDLED;
}
+ if (spi_stat & SIRFSOC_SPI_TXFIFO_EMPTY)
+ complete(&sspi->tx_done);
+ while (!(readl(sspi->base + SIRFSOC_SPI_INT_STATUS) &
+ SIRFSOC_SPI_RX_IO_DMA))
+ cpu_relax();
+ complete(&sspi->rx_done);
+ writel(0x0, sspi->base + SIRFSOC_SPI_INT_EN);
+ writel(SIRFSOC_SPI_INT_MASK_ALL,
+ sspi->base + SIRFSOC_SPI_INT_STATUS);
- if (spi_stat & (SIRFSOC_SPI_FRM_END
- | SIRFSOC_SPI_RXFIFO_THD_REACH))
- while (!((readl(sspi->base + SIRFSOC_SPI_RXFIFO_STATUS)
- & SIRFSOC_SPI_FIFO_EMPTY)) &&
- sspi->left_rx_word)
- sspi->rx_word(sspi);
-
- if (spi_stat & (SIRFSOC_SPI_TXFIFO_EMPTY |
- SIRFSOC_SPI_TXFIFO_THD_REACH))
- while (!((readl(sspi->base + SIRFSOC_SPI_TXFIFO_STATUS)
- & SIRFSOC_SPI_FIFO_FULL)) &&
- sspi->left_tx_word)
- sspi->tx_word(sspi);
-
- /* Received all words */
- if ((sspi->left_rx_word == 0) && (sspi->left_tx_word == 0)) {
- complete(&sspi->rx_done);
- writel(0x0, sspi->base + SIRFSOC_SPI_INT_EN);
- }
return IRQ_HANDLED;
}
@@ -309,59 +304,51 @@ static void spi_sirfsoc_dma_fini_callback(void *data)
complete(dma_complete);
}
-static int spi_sirfsoc_transfer(struct spi_device *spi, struct spi_transfer *t)
+static int spi_sirfsoc_cmd_transfer(struct spi_device *spi,
+ struct spi_transfer *t)
{
struct sirfsoc_spi *sspi;
int timeout = t->len * 10;
- sspi = spi_master_get_devdata(spi->master);
+ u32 cmd;
- sspi->tx = t->tx_buf ? t->tx_buf : sspi->dummypage;
- sspi->rx = t->rx_buf ? t->rx_buf : sspi->dummypage;
- sspi->left_tx_word = sspi->left_rx_word = t->len / sspi->word_width;
- reinit_completion(&sspi->rx_done);
- reinit_completion(&sspi->tx_done);
-
- writel(SIRFSOC_SPI_INT_MASK_ALL, sspi->base + SIRFSOC_SPI_INT_STATUS);
-
- /*
- * fill tx_buf into command register and wait for its completion
- */
- if (sspi->tx_by_cmd) {
- u32 cmd;
- memcpy(&cmd, sspi->tx, t->len);
-
- if (sspi->word_width == 1 && !(spi->mode & SPI_LSB_FIRST))
- cmd = cpu_to_be32(cmd) >>
- ((SIRFSOC_MAX_CMD_BYTES - t->len) * 8);
- if (sspi->word_width == 2 && t->len == 4 &&
- (!(spi->mode & SPI_LSB_FIRST)))
- cmd = ((cmd & 0xffff) << 16) | (cmd >> 16);
-
- writel(cmd, sspi->base + SIRFSOC_SPI_CMD);
- writel(SIRFSOC_SPI_FRM_END_INT_EN,
- sspi->base + SIRFSOC_SPI_INT_EN);
- writel(SIRFSOC_SPI_CMD_TX_EN,
- sspi->base + SIRFSOC_SPI_TX_RX_EN);
+ sspi = spi_master_get_devdata(spi->master);
+ memcpy(&cmd, sspi->tx, t->len);
+ if (sspi->word_width == 1 && !(spi->mode & SPI_LSB_FIRST))
+ cmd = cpu_to_be32(cmd) >>
+ ((SIRFSOC_MAX_CMD_BYTES - t->len) * 8);
+ if (sspi->word_width == 2 && t->len == 4 &&
+ (!(spi->mode & SPI_LSB_FIRST)))
+ cmd = ((cmd & 0xffff) << 16) | (cmd >> 16);
+ writel(cmd, sspi->base + SIRFSOC_SPI_CMD);
+ writel(SIRFSOC_SPI_FRM_END_INT_EN,
+ sspi->base + SIRFSOC_SPI_INT_EN);
+ writel(SIRFSOC_SPI_CMD_TX_EN,
+ sspi->base + SIRFSOC_SPI_TX_RX_EN);
+ if (wait_for_completion_timeout(&sspi->tx_done, timeout) == 0) {
+ dev_err(&spi->dev, "cmd transfer timeout\n");
+ return 0;
+ }
- if (wait_for_completion_timeout(&sspi->tx_done, timeout) == 0) {
- dev_err(&spi->dev, "transfer timeout\n");
- return 0;
- }
+ return t->len;
+}
- return t->len;
- }
+static void spi_sirfsoc_dma_transfer(struct spi_device *spi,
+ struct spi_transfer *t)
+{
+ struct sirfsoc_spi *sspi;
+ struct dma_async_tx_descriptor *rx_desc, *tx_desc;
+ int timeout = t->len * 10;
- if (sspi->left_tx_word == 1) {
- writel(readl(sspi->base + SIRFSOC_SPI_CTRL) |
- SIRFSOC_SPI_ENA_AUTO_CLR,
- sspi->base + SIRFSOC_SPI_CTRL);
- writel(0, sspi->base + SIRFSOC_SPI_TX_DMA_IO_LEN);
- writel(0, sspi->base + SIRFSOC_SPI_RX_DMA_IO_LEN);
- } else if ((sspi->left_tx_word > 1) && (sspi->left_tx_word <
- SIRFSOC_SPI_DAT_FRM_LEN_MAX)) {
+ sspi = spi_master_get_devdata(spi->master);
+ writel(SIRFSOC_SPI_FIFO_RESET, sspi->base + SIRFSOC_SPI_RXFIFO_OP);
+ writel(SIRFSOC_SPI_FIFO_RESET, sspi->base + SIRFSOC_SPI_TXFIFO_OP);
+ writel(SIRFSOC_SPI_FIFO_START, sspi->base + SIRFSOC_SPI_RXFIFO_OP);
+ writel(SIRFSOC_SPI_FIFO_START, sspi->base + SIRFSOC_SPI_TXFIFO_OP);
+ writel(0, sspi->base + SIRFSOC_SPI_INT_EN);
+ writel(SIRFSOC_SPI_INT_MASK_ALL, sspi->base + SIRFSOC_SPI_INT_STATUS);
+ if (sspi->left_tx_word < SIRFSOC_SPI_DAT_FRM_LEN_MAX) {
writel(readl(sspi->base + SIRFSOC_SPI_CTRL) |
- SIRFSOC_SPI_MUL_DAT_MODE |
- SIRFSOC_SPI_ENA_AUTO_CLR,
+ SIRFSOC_SPI_ENA_AUTO_CLR | SIRFSOC_SPI_MUL_DAT_MODE,
sspi->base + SIRFSOC_SPI_CTRL);
writel(sspi->left_tx_word - 1,
sspi->base + SIRFSOC_SPI_TX_DMA_IO_LEN);
@@ -373,76 +360,122 @@ static int spi_sirfsoc_transfer(struct spi_device *spi, struct spi_transfer *t)
writel(0, sspi->base + SIRFSOC_SPI_TX_DMA_IO_LEN);
writel(0, sspi->base + SIRFSOC_SPI_RX_DMA_IO_LEN);
}
-
- writel(SIRFSOC_SPI_FIFO_RESET, sspi->base + SIRFSOC_SPI_RXFIFO_OP);
- writel(SIRFSOC_SPI_FIFO_RESET, sspi->base + SIRFSOC_SPI_TXFIFO_OP);
- writel(SIRFSOC_SPI_FIFO_START, sspi->base + SIRFSOC_SPI_RXFIFO_OP);
- writel(SIRFSOC_SPI_FIFO_START, sspi->base + SIRFSOC_SPI_TXFIFO_OP);
-
- if (IS_DMA_VALID(t)) {
- struct dma_async_tx_descriptor *rx_desc, *tx_desc;
-
- sspi->dst_start = dma_map_single(&spi->dev, sspi->rx, t->len, DMA_FROM_DEVICE);
- rx_desc = dmaengine_prep_slave_single(sspi->rx_chan,
- sspi->dst_start, t->len, DMA_DEV_TO_MEM,
- DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
- rx_desc->callback = spi_sirfsoc_dma_fini_callback;
- rx_desc->callback_param = &sspi->rx_done;
-
- sspi->src_start = dma_map_single(&spi->dev, (void *)sspi->tx, t->len, DMA_TO_DEVICE);
- tx_desc = dmaengine_prep_slave_single(sspi->tx_chan,
- sspi->src_start, t->len, DMA_MEM_TO_DEV,
- DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
- tx_desc->callback = spi_sirfsoc_dma_fini_callback;
- tx_desc->callback_param = &sspi->tx_done;
-
- dmaengine_submit(tx_desc);
- dmaengine_submit(rx_desc);
- dma_async_issue_pending(sspi->tx_chan);
- dma_async_issue_pending(sspi->rx_chan);
- } else {
- /* Send the first word to trigger the whole tx/rx process */
- sspi->tx_word(sspi);
-
- writel(SIRFSOC_SPI_RX_OFLOW_INT_EN | SIRFSOC_SPI_TX_UFLOW_INT_EN |
- SIRFSOC_SPI_RXFIFO_THD_INT_EN | SIRFSOC_SPI_TXFIFO_THD_INT_EN |
- SIRFSOC_SPI_FRM_END_INT_EN | SIRFSOC_SPI_RXFIFO_FULL_INT_EN |
- SIRFSOC_SPI_TXFIFO_EMPTY_INT_EN, sspi->base + SIRFSOC_SPI_INT_EN);
- }
-
- writel(SIRFSOC_SPI_RX_EN | SIRFSOC_SPI_TX_EN, sspi->base + SIRFSOC_SPI_TX_RX_EN);
-
- if (!IS_DMA_VALID(t)) { /* for PIO */
- if (wait_for_completion_timeout(&sspi->rx_done, timeout) == 0)
- dev_err(&spi->dev, "transfer timeout\n");
- } else if (wait_for_completion_timeout(&sspi->rx_done, timeout) == 0) {
+ sspi->dst_start = dma_map_single(&spi->dev, sspi->rx, t->len,
+ (t->tx_buf != t->rx_buf) ?
+ DMA_FROM_DEVICE : DMA_BIDIRECTIONAL);
+ rx_desc = dmaengine_prep_slave_single(sspi->rx_chan,
+ sspi->dst_start, t->len, DMA_DEV_TO_MEM,
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+ rx_desc->callback = spi_sirfsoc_dma_fini_callback;
+ rx_desc->callback_param = &sspi->rx_done;
+
+ sspi->src_start = dma_map_single(&spi->dev, (void *)sspi->tx, t->len,
+ (t->tx_buf != t->rx_buf) ?
+ DMA_TO_DEVICE : DMA_BIDIRECTIONAL);
+ tx_desc = dmaengine_prep_slave_single(sspi->tx_chan,
+ sspi->src_start, t->len, DMA_MEM_TO_DEV,
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+ tx_desc->callback = spi_sirfsoc_dma_fini_callback;
+ tx_desc->callback_param = &sspi->tx_done;
+
+ dmaengine_submit(tx_desc);
+ dmaengine_submit(rx_desc);
+ dma_async_issue_pending(sspi->tx_chan);
+ dma_async_issue_pending(sspi->rx_chan);
+ writel(SIRFSOC_SPI_RX_EN | SIRFSOC_SPI_TX_EN,
+ sspi->base + SIRFSOC_SPI_TX_RX_EN);
+ if (wait_for_completion_timeout(&sspi->rx_done, timeout) == 0) {
dev_err(&spi->dev, "transfer timeout\n");
dmaengine_terminate_all(sspi->rx_chan);
} else
sspi->left_rx_word = 0;
-
/*
* we only wait tx-done event if transferring by DMA. for PIO,
* we get rx data by writing tx data, so if rx is done, tx has
* done earlier
*/
- if (IS_DMA_VALID(t)) {
- if (wait_for_completion_timeout(&sspi->tx_done, timeout) == 0) {
- dev_err(&spi->dev, "transfer timeout\n");
- dmaengine_terminate_all(sspi->tx_chan);
- }
- }
-
- if (IS_DMA_VALID(t)) {
- dma_unmap_single(&spi->dev, sspi->src_start, t->len, DMA_TO_DEVICE);
- dma_unmap_single(&spi->dev, sspi->dst_start, t->len, DMA_FROM_DEVICE);
+ if (wait_for_completion_timeout(&sspi->tx_done, timeout) == 0) {
+ dev_err(&spi->dev, "transfer timeout\n");
+ dmaengine_terminate_all(sspi->tx_chan);
}
-
+ dma_unmap_single(&spi->dev, sspi->src_start, t->len, DMA_TO_DEVICE);
+ dma_unmap_single(&spi->dev, sspi->dst_start, t->len, DMA_FROM_DEVICE);
/* TX, RX FIFO stop */
writel(0, sspi->base + SIRFSOC_SPI_RXFIFO_OP);
writel(0, sspi->base + SIRFSOC_SPI_TXFIFO_OP);
- writel(0, sspi->base + SIRFSOC_SPI_TX_RX_EN);
- writel(0, sspi->base + SIRFSOC_SPI_INT_EN);
+ if (sspi->left_tx_word >= SIRFSOC_SPI_DAT_FRM_LEN_MAX)
+ writel(0, sspi->base + SIRFSOC_SPI_TX_RX_EN);
+}
+
+static void spi_sirfsoc_pio_transfer(struct spi_device *spi,
+ struct spi_transfer *t)
+{
+ struct sirfsoc_spi *sspi;
+ int timeout = t->len * 10;
+
+ sspi = spi_master_get_devdata(spi->master);
+ do {
+ writel(SIRFSOC_SPI_FIFO_RESET,
+ sspi->base + SIRFSOC_SPI_RXFIFO_OP);
+ writel(SIRFSOC_SPI_FIFO_RESET,
+ sspi->base + SIRFSOC_SPI_TXFIFO_OP);
+ writel(SIRFSOC_SPI_FIFO_START,
+ sspi->base + SIRFSOC_SPI_RXFIFO_OP);
+ writel(SIRFSOC_SPI_FIFO_START,
+ sspi->base + SIRFSOC_SPI_TXFIFO_OP);
+ writel(0, sspi->base + SIRFSOC_SPI_INT_EN);
+ writel(SIRFSOC_SPI_INT_MASK_ALL,
+ sspi->base + SIRFSOC_SPI_INT_STATUS);
+ writel(readl(sspi->base + SIRFSOC_SPI_CTRL) |
+ SIRFSOC_SPI_MUL_DAT_MODE | SIRFSOC_SPI_ENA_AUTO_CLR,
+ sspi->base + SIRFSOC_SPI_CTRL);
+ writel(min(sspi->left_tx_word, (u32)(256 / sspi->word_width))
+ - 1, sspi->base + SIRFSOC_SPI_TX_DMA_IO_LEN);
+ writel(min(sspi->left_rx_word, (u32)(256 / sspi->word_width))
+ - 1, sspi->base + SIRFSOC_SPI_RX_DMA_IO_LEN);
+ while (!((readl(sspi->base + SIRFSOC_SPI_TXFIFO_STATUS)
+ & SIRFSOC_SPI_FIFO_FULL)) && sspi->left_tx_word)
+ sspi->tx_word(sspi);
+ writel(SIRFSOC_SPI_TXFIFO_EMPTY_INT_EN |
+ SIRFSOC_SPI_TX_UFLOW_INT_EN |
+ SIRFSOC_SPI_RX_OFLOW_INT_EN,
+ sspi->base + SIRFSOC_SPI_INT_EN);
+ writel(SIRFSOC_SPI_RX_EN | SIRFSOC_SPI_TX_EN,
+ sspi->base + SIRFSOC_SPI_TX_RX_EN);
+ if (!wait_for_completion_timeout(&sspi->tx_done, timeout) ||
+ !wait_for_completion_timeout(&sspi->rx_done, timeout)) {
+ dev_err(&spi->dev, "transfer timeout\n");
+ break;
+ }
+ while (!((readl(sspi->base + SIRFSOC_SPI_RXFIFO_STATUS)
+ & SIRFSOC_SPI_FIFO_EMPTY)) && sspi->left_rx_word)
+ sspi->rx_word(sspi);
+ writel(0, sspi->base + SIRFSOC_SPI_RXFIFO_OP);
+ writel(0, sspi->base + SIRFSOC_SPI_TXFIFO_OP);
+ } while (sspi->left_tx_word != 0 || sspi->left_rx_word != 0);
+}
+
+static int spi_sirfsoc_transfer(struct spi_device *spi, struct spi_transfer *t)
+{
+ struct sirfsoc_spi *sspi;
+ sspi = spi_master_get_devdata(spi->master);
+
+ sspi->tx = t->tx_buf ? t->tx_buf : sspi->dummypage;
+ sspi->rx = t->rx_buf ? t->rx_buf : sspi->dummypage;
+ sspi->left_tx_word = sspi->left_rx_word = t->len / sspi->word_width;
+ reinit_completion(&sspi->rx_done);
+ reinit_completion(&sspi->tx_done);
+ /*
+ * in the transfer, if transfer data using command register with rx_buf
+ * null, just fill command data into command register and wait for its
+ * completion.
+ */
+ if (sspi->tx_by_cmd)
+ spi_sirfsoc_cmd_transfer(spi, t);
+ else if (IS_DMA_VALID(t))
+ spi_sirfsoc_dma_transfer(spi, t);
+ else
+ spi_sirfsoc_pio_transfer(spi, t);
return t->len - sspi->left_rx_word * sspi->word_width;
}
@@ -512,7 +545,8 @@ spi_sirfsoc_setup_transfer(struct spi_device *spi, struct spi_transfer *t)
break;
case 12:
case 16:
- regval |= (bits_per_word == 12) ? SIRFSOC_SPI_TRAN_DAT_FORMAT_12 :
+ regval |= (bits_per_word == 12) ?
+ SIRFSOC_SPI_TRAN_DAT_FORMAT_12 :
SIRFSOC_SPI_TRAN_DAT_FORMAT_16;
sspi->rx_word = spi_sirfsoc_rx_word_u16;
sspi->tx_word = spi_sirfsoc_tx_word_u16;
@@ -540,8 +574,8 @@ spi_sirfsoc_setup_transfer(struct spi_device *spi, struct spi_transfer *t)
regval |= SIRFSOC_SPI_CLK_IDLE_STAT;
/*
- * Data should be driven at least 1/2 cycle before the fetch edge to make
- * sure that data gets stable at the fetch edge.
+ * Data should be driven at least 1/2 cycle before the fetch edge
+ * to make sure that data gets stable at the fetch edge.
*/
if (((spi->mode & SPI_CPOL) && (spi->mode & SPI_CPHA)) ||
(!(spi->mode & SPI_CPOL) && !(spi->mode & SPI_CPHA)))
@@ -578,11 +612,14 @@ spi_sirfsoc_setup_transfer(struct spi_device *spi, struct spi_transfer *t)
if (IS_DMA_VALID(t)) {
/* Enable DMA mode for RX, TX */
writel(0, sspi->base + SIRFSOC_SPI_TX_DMA_IO_CTRL);
- writel(SIRFSOC_SPI_RX_DMA_FLUSH, sspi->base + SIRFSOC_SPI_RX_DMA_IO_CTRL);
+ writel(SIRFSOC_SPI_RX_DMA_FLUSH,
+ sspi->base + SIRFSOC_SPI_RX_DMA_IO_CTRL);
} else {
/* Enable IO mode for RX, TX */
- writel(SIRFSOC_SPI_IO_MODE_SEL, sspi->base + SIRFSOC_SPI_TX_DMA_IO_CTRL);
- writel(SIRFSOC_SPI_IO_MODE_SEL, sspi->base + SIRFSOC_SPI_RX_DMA_IO_CTRL);
+ writel(SIRFSOC_SPI_IO_MODE_SEL,
+ sspi->base + SIRFSOC_SPI_TX_DMA_IO_CTRL);
+ writel(SIRFSOC_SPI_IO_MODE_SEL,
+ sspi->base + SIRFSOC_SPI_RX_DMA_IO_CTRL);
}
return 0;
@@ -612,7 +649,8 @@ static int spi_sirfsoc_probe(struct platform_device *pdev)
goto err_cs;
}
- master = spi_alloc_master(&pdev->dev, sizeof(*sspi) + sizeof(int) * num_cs);
+ master = spi_alloc_master(&pdev->dev,
+ sizeof(*sspi) + sizeof(int) * num_cs);
if (!master) {
dev_err(&pdev->dev, "Unable to allocate SPI master\n");
return -ENOMEM;
@@ -808,8 +846,7 @@ static struct platform_driver spi_sirfsoc_driver = {
.remove = spi_sirfsoc_remove,
};
module_platform_driver(spi_sirfsoc_driver);
-
MODULE_DESCRIPTION("SiRF SoC SPI master driver");
-MODULE_AUTHOR("Zhiwu Song <Zhiwu.Song@csr.com>, "
- "Barry Song <Baohua.Song@csr.com>");
+MODULE_AUTHOR("Zhiwu Song <Zhiwu.Song@csr.com>");
+MODULE_AUTHOR("Barry Song <Baohua.Song@csr.com>");
MODULE_LICENSE("GPL v2");
diff --git a/drivers/spi/spi-sun4i.c b/drivers/spi/spi-sun4i.c
index d266a8702067..85204c93f3d3 100644
--- a/drivers/spi/spi-sun4i.c
+++ b/drivers/spi/spi-sun4i.c
@@ -19,7 +19,6 @@
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
-#include <linux/workqueue.h>
#include <linux/spi/spi.h>
diff --git a/drivers/spi/spi-sun6i.c b/drivers/spi/spi-sun6i.c
index b3e3498a7e6f..bd24093f4038 100644
--- a/drivers/spi/spi-sun6i.c
+++ b/drivers/spi/spi-sun6i.c
@@ -20,7 +20,6 @@
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/reset.h>
-#include <linux/workqueue.h>
#include <linux/spi/spi.h>
diff --git a/drivers/spi/spi-tegra114.c b/drivers/spi/spi-tegra114.c
index 400649595505..e4a85ada861d 100644
--- a/drivers/spi/spi-tegra114.c
+++ b/drivers/spi/spi-tegra114.c
@@ -1012,7 +1012,7 @@ static irqreturn_t tegra_spi_isr(int irq, void *context_data)
return IRQ_WAKE_THREAD;
}
-static struct of_device_id tegra_spi_of_match[] = {
+static const struct of_device_id tegra_spi_of_match[] = {
{ .compatible = "nvidia,tegra114-spi", },
{}
};
diff --git a/drivers/spi/spi-tegra20-sflash.c b/drivers/spi/spi-tegra20-sflash.c
index 47869ea636e1..3548ce25c08f 100644
--- a/drivers/spi/spi-tegra20-sflash.c
+++ b/drivers/spi/spi-tegra20-sflash.c
@@ -419,7 +419,7 @@ static irqreturn_t tegra_sflash_isr(int irq, void *context_data)
return handle_cpu_based_xfer(tsd);
}
-static struct of_device_id tegra_sflash_of_match[] = {
+static const struct of_device_id tegra_sflash_of_match[] = {
{ .compatible = "nvidia,tegra20-sflash", },
{}
};
diff --git a/drivers/spi/spi-tegra20-slink.c b/drivers/spi/spi-tegra20-slink.c
index e3c1b93e45d1..0b9e32e9f493 100644
--- a/drivers/spi/spi-tegra20-slink.c
+++ b/drivers/spi/spi-tegra20-slink.c
@@ -1001,7 +1001,7 @@ static const struct tegra_slink_chip_data tegra20_spi_cdata = {
.cs_hold_time = false,
};
-static struct of_device_id tegra_slink_of_match[] = {
+static const struct of_device_id tegra_slink_of_match[] = {
{ .compatible = "nvidia,tegra30-slink", .data = &tegra30_spi_cdata, },
{ .compatible = "nvidia,tegra20-slink", .data = &tegra20_spi_cdata, },
{}
diff --git a/drivers/spi/spi-tle62x0.c b/drivers/spi/spi-tle62x0.c
index 2d4010d80824..daf5aa1c24c3 100644
--- a/drivers/spi/spi-tle62x0.c
+++ b/drivers/spi/spi-tle62x0.c
@@ -253,10 +253,8 @@ static int tle62x0_probe(struct spi_device *spi)
}
st = kzalloc(sizeof(struct tle62x0_state), GFP_KERNEL);
- if (st == NULL) {
- dev_err(&spi->dev, "no memory for device state\n");
+ if (st == NULL)
return -ENOMEM;
- }
st->us = spi;
st->nr_gpio = pdata->gpio_count;
diff --git a/drivers/spi/spi-topcliff-pch.c b/drivers/spi/spi-topcliff-pch.c
index f406b30af961..f05abf89c067 100644
--- a/drivers/spi/spi-topcliff-pch.c
+++ b/drivers/spi/spi-topcliff-pch.c
@@ -1578,14 +1578,11 @@ static int pch_spi_probe(struct pci_dev *pdev, const struct pci_device_id *id)
struct pch_pd_dev_save *pd_dev_save;
pd_dev_save = kzalloc(sizeof(struct pch_pd_dev_save), GFP_KERNEL);
- if (!pd_dev_save) {
- dev_err(&pdev->dev, "%s Can't allocate pd_dev_sav\n", __func__);
+ if (!pd_dev_save)
return -ENOMEM;
- }
board_dat = kzalloc(sizeof(struct pch_spi_board_data), GFP_KERNEL);
if (!board_dat) {
- dev_err(&pdev->dev, "%s Can't allocate board_dat\n", __func__);
retval = -ENOMEM;
goto err_no_mem;
}
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index 939edf473235..d4f9670b51bc 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -796,7 +796,7 @@ static int spi_transfer_one_message(struct spi_master *master,
if (ret > 0) {
ret = 0;
ms = xfer->len * 8 * 1000 / xfer->speed_hz;
- ms += 10; /* some tolerance */
+ ms += ms + 100; /* some tolerance */
ms = wait_for_completion_timeout(&master->xfer_completion,
msecs_to_jiffies(ms));
@@ -1255,6 +1255,8 @@ static void of_register_spi_devices(struct spi_master *master)
spi->mode |= SPI_CS_HIGH;
if (of_find_property(nc, "spi-3wire", NULL))
spi->mode |= SPI_3WIRE;
+ if (of_find_property(nc, "spi-lsb-first", NULL))
+ spi->mode |= SPI_LSB_FIRST;
/* Device DUAL/QUAD mode */
if (!of_property_read_u32(nc, "spi-tx-bus-width", &value)) {
@@ -1268,11 +1270,10 @@ static void of_register_spi_devices(struct spi_master *master)
spi->mode |= SPI_TX_QUAD;
break;
default:
- dev_err(&master->dev,
- "spi-tx-bus-width %d not supported\n",
- value);
- spi_dev_put(spi);
- continue;
+ dev_warn(&master->dev,
+ "spi-tx-bus-width %d not supported\n",
+ value);
+ break;
}
}
@@ -1287,11 +1288,10 @@ static void of_register_spi_devices(struct spi_master *master)
spi->mode |= SPI_RX_QUAD;
break;
default:
- dev_err(&master->dev,
- "spi-rx-bus-width %d not supported\n",
- value);
- spi_dev_put(spi);
- continue;
+ dev_warn(&master->dev,
+ "spi-rx-bus-width %d not supported\n",
+ value);
+ break;
}
}
diff --git a/arch/blackfin/include/asm/bfin_spi3.h b/include/linux/spi/adi_spi3.h
index 0957e65a54be..c84123aa1d06 100644
--- a/arch/blackfin/include/asm/bfin_spi3.h
+++ b/include/linux/spi/adi_spi3.h
@@ -1,7 +1,7 @@
/*
* Analog Devices SPI3 controller driver
*
- * Copyright (c) 2011 Analog Devices Inc.
+ * Copyright (c) 2014 Analog Devices Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -11,14 +11,10 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-#ifndef _SPI_CHANNEL_H_
-#define _SPI_CHANNEL_H_
+#ifndef _ADI_SPI3_H_
+#define _ADI_SPI3_H_
#include <linux/types.h>
@@ -209,9 +205,9 @@
#define SPI_ILAT_CLR_TFI 0x00000800 /* Transmit Finish Indication */
/*
- * bfin spi3 registers layout
+ * adi spi3 registers layout
*/
-struct bfin_spi_regs {
+struct adi_spi_regs {
u32 revid;
u32 control;
u32 rx_control;
@@ -240,7 +236,7 @@ struct bfin_spi_regs {
#define MAX_CTRL_CS 8 /* cs in spi controller */
/* device.platform_data for SSP controller devices */
-struct bfin_spi3_master {
+struct adi_spi3_master {
u16 num_chipselect;
u16 pin_req[7];
};
@@ -248,11 +244,11 @@ struct bfin_spi3_master {
/* spi_board_info.controller_data for SPI slave devices,
* copied to spi_device.platform_data ... mostly for dma tuning
*/
-struct bfin_spi3_chip {
+struct adi_spi3_chip {
u32 control;
u16 cs_chg_udelay; /* Some devices require 16-bit delays */
u32 tx_dummy_val; /* tx value for rx only transfer */
bool enable_dma;
};
-#endif /* _SPI_CHANNEL_H_ */
+#endif /* _ADI_SPI3_H_ */
diff --git a/include/linux/spi/rspi.h b/include/linux/spi/rspi.h
index a25bd6f65e7f..e546b2ceb623 100644
--- a/include/linux/spi/rspi.h
+++ b/include/linux/spi/rspi.h
@@ -25,8 +25,6 @@ struct rspi_plat_data {
unsigned int dma_tx_id;
unsigned int dma_rx_id;
- unsigned dma_width_16bit:1; /* DMAC read/write width = 16-bit */
-
u16 num_chipselect;
};