summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--drivers/parport/ieee1284.c90
-rw-r--r--drivers/parport/ieee1284_ops.c67
2 files changed, 57 insertions, 100 deletions
diff --git a/drivers/parport/ieee1284.c b/drivers/parport/ieee1284.c
index 90fb73575495..ba562bcd4b80 100644
--- a/drivers/parport/ieee1284.c
+++ b/drivers/parport/ieee1284.c
@@ -31,12 +31,6 @@
#undef DEBUG /* Don't want a garbled console */
#endif
-#ifdef DEBUG
-#define DPRINTK(stuff...) printk (stuff)
-#else
-#define DPRINTK(stuff...)
-#endif
-
/* Make parport_wait_peripheral wake up.
* It will be useful to call this from an interrupt handler. */
static void parport_ieee1284_wakeup (struct parport *port)
@@ -258,12 +252,11 @@ static void parport_ieee1284_terminate (struct parport *port)
PARPORT_STATUS_PAPEROUT,
PARPORT_STATUS_PAPEROUT);
if (r)
- DPRINTK (KERN_INFO "%s: Timeout at event 49\n",
+ pr_debug("%s: Timeout at event 49\n",
port->name);
parport_data_forward (port);
- DPRINTK (KERN_DEBUG "%s: ECP direction: forward\n",
- port->name);
+ pr_debug("%s: ECP direction: forward\n", port->name);
port->ieee1284.phase = IEEE1284_PH_FWD_IDLE;
}
@@ -281,8 +274,7 @@ static void parport_ieee1284_terminate (struct parport *port)
/* Event 24: nAck goes low */
r = parport_wait_peripheral (port, PARPORT_STATUS_ACK, 0);
if (r)
- DPRINTK (KERN_INFO "%s: Timeout at event 24\n",
- port->name);
+ pr_debug("%s: Timeout at event 24\n", port->name);
/* Event 25: Set nAutoFd low */
parport_frob_control (port,
@@ -294,8 +286,7 @@ static void parport_ieee1284_terminate (struct parport *port)
PARPORT_STATUS_ACK,
PARPORT_STATUS_ACK);
if (r)
- DPRINTK (KERN_INFO "%s: Timeout at event 27\n",
- port->name);
+ pr_debug("%s: Timeout at event 27\n", port->name);
/* Event 29: Set nAutoFd high */
parport_frob_control (port, PARPORT_CONTROL_AUTOFD, 0);
@@ -304,8 +295,7 @@ static void parport_ieee1284_terminate (struct parport *port)
port->ieee1284.mode = IEEE1284_MODE_COMPAT;
port->ieee1284.phase = IEEE1284_PH_FWD_IDLE;
- DPRINTK (KERN_DEBUG "%s: In compatibility (forward idle) mode\n",
- port->name);
+ pr_debug("%s: In compatibility (forward idle) mode\n", port->name);
}
#endif /* IEEE1284 support */
@@ -406,8 +396,7 @@ int parport_negotiate (struct parport *port, int mode)
PARPORT_CONTROL_SELECT
| PARPORT_CONTROL_AUTOFD,
PARPORT_CONTROL_SELECT);
- DPRINTK (KERN_DEBUG
- "%s: Peripheral not IEEE1284 compliant (0x%02X)\n",
+ pr_debug("%s: Peripheral not IEEE1284 compliant (0x%02X)\n",
port->name, parport_read_status (port));
port->ieee1284.phase = IEEE1284_PH_FWD_IDLE;
return -1; /* Not IEEE1284 compliant */
@@ -430,8 +419,7 @@ int parport_negotiate (struct parport *port, int mode)
PARPORT_STATUS_ACK,
PARPORT_STATUS_ACK)) {
/* This shouldn't really happen with a compliant device. */
- DPRINTK (KERN_DEBUG
- "%s: Mode 0x%02x not supported? (0x%02x)\n",
+ pr_debug("%s: Mode 0x%02x not supported? (0x%02x)\n",
port->name, mode, port->ops->read_status (port));
parport_ieee1284_terminate (port);
return 1;
@@ -442,7 +430,7 @@ int parport_negotiate (struct parport *port, int mode)
/* xflag should be high for all modes other than nibble (0). */
if (mode && !xflag) {
/* Mode not supported. */
- DPRINTK (KERN_DEBUG "%s: Mode 0x%02x rejected by peripheral\n",
+ pr_debug("%s: Mode 0x%02x rejected by peripheral\n",
port->name, mode);
parport_ieee1284_terminate (port);
return 1;
@@ -463,9 +451,7 @@ int parport_negotiate (struct parport *port, int mode)
/* Event 52: nAck goes low */
if (parport_wait_peripheral (port, PARPORT_STATUS_ACK, 0)) {
/* This peripheral is _very_ slow. */
- DPRINTK (KERN_DEBUG
- "%s: Event 52 didn't happen\n",
- port->name);
+ pr_debug("%s: Event 52 didn't happen\n", port->name);
parport_ieee1284_terminate (port);
return 1;
}
@@ -481,10 +467,9 @@ int parport_negotiate (struct parport *port, int mode)
PARPORT_STATUS_ACK)) {
/* This shouldn't really happen with a compliant
* device. */
- DPRINTK (KERN_DEBUG
- "%s: Mode 0x%02x not supported? (0x%02x)\n",
+ pr_debug("%s: Mode 0x%02x not supported? (0x%02x)\n",
port->name, mode,
- port->ops->read_status (port));
+ port->ops->read_status(port));
parport_ieee1284_terminate (port);
return 1;
}
@@ -495,8 +480,8 @@ int parport_negotiate (struct parport *port, int mode)
/* xflag should be high. */
if (!xflag) {
/* Extended mode not supported. */
- DPRINTK (KERN_DEBUG "%s: Extended mode 0x%02x not "
- "supported\n", port->name, mode);
+ pr_debug("%s: Extended mode 0x%02x not supported\n",
+ port->name, mode);
parport_ieee1284_terminate (port);
return 1;
}
@@ -505,7 +490,7 @@ int parport_negotiate (struct parport *port, int mode)
}
/* Mode is supported */
- DPRINTK (KERN_DEBUG "%s: In mode 0x%02x\n", port->name, mode);
+ pr_debug("%s: In mode 0x%02x\n", port->name, mode);
port->ieee1284.mode = mode;
/* But ECP is special */
@@ -522,13 +507,11 @@ int parport_negotiate (struct parport *port, int mode)
PARPORT_STATUS_PAPEROUT,
PARPORT_STATUS_PAPEROUT);
if (r) {
- DPRINTK (KERN_INFO "%s: Timeout at event 31\n",
- port->name);
+ pr_debug("%s: Timeout at event 31\n", port->name);
}
port->ieee1284.phase = IEEE1284_PH_FWD_IDLE;
- DPRINTK (KERN_DEBUG "%s: ECP direction: forward\n",
- port->name);
+ pr_debug("%s: ECP direction: forward\n", port->name);
} else switch (mode) {
case IEEE1284_MODE_NIBBLE:
case IEEE1284_MODE_BYTE:
@@ -573,7 +556,7 @@ void parport_ieee1284_interrupt (void *handle)
if (port->ieee1284.phase == IEEE1284_PH_REV_IDLE) {
/* An interrupt in this phase means that data
* is now available. */
- DPRINTK (KERN_DEBUG "%s: Data available\n", port->name);
+ pr_debug("%s: Data available\n", port->name);
parport_ieee1284_ack_data_avail (port);
}
#endif /* IEEE1284 support */
@@ -617,13 +600,12 @@ ssize_t parport_write (struct parport *port, const void *buffer, size_t len)
parport_negotiate (port, IEEE1284_MODE_COMPAT);
/* fall through */
case IEEE1284_MODE_COMPAT:
- DPRINTK (KERN_DEBUG "%s: Using compatibility mode\n",
- port->name);
+ pr_debug("%s: Using compatibility mode\n", port->name);
fn = port->ops->compat_write_data;
break;
case IEEE1284_MODE_EPP:
- DPRINTK (KERN_DEBUG "%s: Using EPP mode\n", port->name);
+ pr_debug("%s: Using EPP mode\n", port->name);
if (addr) {
fn = port->ops->epp_write_addr;
} else {
@@ -631,8 +613,7 @@ ssize_t parport_write (struct parport *port, const void *buffer, size_t len)
}
break;
case IEEE1284_MODE_EPPSWE:
- DPRINTK (KERN_DEBUG "%s: Using software-emulated EPP mode\n",
- port->name);
+ pr_debug("%s: Using software-emulated EPP mode\n", port->name);
if (addr) {
fn = parport_ieee1284_epp_write_addr;
} else {
@@ -641,7 +622,7 @@ ssize_t parport_write (struct parport *port, const void *buffer, size_t len)
break;
case IEEE1284_MODE_ECP:
case IEEE1284_MODE_ECPRLE:
- DPRINTK (KERN_DEBUG "%s: Using ECP mode\n", port->name);
+ pr_debug("%s: Using ECP mode\n", port->name);
if (addr) {
fn = port->ops->ecp_write_addr;
} else {
@@ -650,8 +631,7 @@ ssize_t parport_write (struct parport *port, const void *buffer, size_t len)
break;
case IEEE1284_MODE_ECPSWE:
- DPRINTK (KERN_DEBUG "%s: Using software-emulated ECP mode\n",
- port->name);
+ pr_debug("%s: Using software-emulated ECP mode\n", port->name);
/* The caller has specified that it must be emulated,
* even if we have ECP hardware! */
if (addr) {
@@ -662,13 +642,13 @@ ssize_t parport_write (struct parport *port, const void *buffer, size_t len)
break;
default:
- DPRINTK (KERN_DEBUG "%s: Unknown mode 0x%02x\n", port->name,
- port->ieee1284.mode);
+ pr_debug("%s: Unknown mode 0x%02x\n",
+ port->name, port->ieee1284.mode);
return -ENOSYS;
}
retval = (*fn) (port, buffer, len, 0);
- DPRINTK (KERN_DEBUG "%s: wrote %d/%d bytes\n", port->name, retval, len);
+ pr_debug("%s: wrote %zd/%zu bytes\n", port->name, retval, len);
return retval;
#endif /* IEEE1284 support */
}
@@ -715,7 +695,7 @@ ssize_t parport_read (struct parport *port, void *buffer, size_t len)
if ((port->physport->modes & PARPORT_MODE_TRISTATE) &&
!parport_negotiate (port, IEEE1284_MODE_BYTE)) {
/* got into BYTE mode OK */
- DPRINTK (KERN_DEBUG "%s: Using byte mode\n", port->name);
+ pr_debug("%s: Using byte mode\n", port->name);
fn = port->ops->byte_read_data;
break;
}
@@ -724,17 +704,17 @@ ssize_t parport_read (struct parport *port, void *buffer, size_t len)
}
/* fall through - to NIBBLE */
case IEEE1284_MODE_NIBBLE:
- DPRINTK (KERN_DEBUG "%s: Using nibble mode\n", port->name);
+ pr_debug("%s: Using nibble mode\n", port->name);
fn = port->ops->nibble_read_data;
break;
case IEEE1284_MODE_BYTE:
- DPRINTK (KERN_DEBUG "%s: Using byte mode\n", port->name);
+ pr_debug("%s: Using byte mode\n", port->name);
fn = port->ops->byte_read_data;
break;
case IEEE1284_MODE_EPP:
- DPRINTK (KERN_DEBUG "%s: Using EPP mode\n", port->name);
+ pr_debug("%s: Using EPP mode\n", port->name);
if (addr) {
fn = port->ops->epp_read_addr;
} else {
@@ -742,8 +722,7 @@ ssize_t parport_read (struct parport *port, void *buffer, size_t len)
}
break;
case IEEE1284_MODE_EPPSWE:
- DPRINTK (KERN_DEBUG "%s: Using software-emulated EPP mode\n",
- port->name);
+ pr_debug("%s: Using software-emulated EPP mode\n", port->name);
if (addr) {
fn = parport_ieee1284_epp_read_addr;
} else {
@@ -752,19 +731,18 @@ ssize_t parport_read (struct parport *port, void *buffer, size_t len)
break;
case IEEE1284_MODE_ECP:
case IEEE1284_MODE_ECPRLE:
- DPRINTK (KERN_DEBUG "%s: Using ECP mode\n", port->name);
+ pr_debug("%s: Using ECP mode\n", port->name);
fn = port->ops->ecp_read_data;
break;
case IEEE1284_MODE_ECPSWE:
- DPRINTK (KERN_DEBUG "%s: Using software-emulated ECP mode\n",
- port->name);
+ pr_debug("%s: Using software-emulated ECP mode\n", port->name);
fn = parport_ieee1284_ecp_read_data;
break;
default:
- DPRINTK (KERN_DEBUG "%s: Unknown mode 0x%02x\n", port->name,
- port->physport->ieee1284.mode);
+ pr_debug("%s: Unknown mode 0x%02x\n",
+ port->name, port->physport->ieee1284.mode);
return -ENOSYS;
}
diff --git a/drivers/parport/ieee1284_ops.c b/drivers/parport/ieee1284_ops.c
index 5d41dda6da4e..b1c9f513167b 100644
--- a/drivers/parport/ieee1284_ops.c
+++ b/drivers/parport/ieee1284_ops.c
@@ -27,12 +27,6 @@
#undef DEBUG /* Don't want a garbled console */
#endif
-#ifdef DEBUG
-#define DPRINTK(stuff...) printk (stuff)
-#else
-#define DPRINTK(stuff...)
-#endif
-
/*** *
* One-way data transfer functions. *
* ***/
@@ -115,7 +109,7 @@ size_t parport_ieee1284_write_compat (struct parport *port,
if (signal_pending (current))
break;
- DPRINTK (KERN_DEBUG "%s: Timed out\n", port->name);
+ pr_debug("%s: Timed out\n", port->name);
break;
ready:
@@ -178,9 +172,8 @@ size_t parport_ieee1284_read_nibble (struct parport *port,
if (parport_wait_peripheral (port,
PARPORT_STATUS_ACK, 0)) {
/* Timeout -- no more data? */
- DPRINTK (KERN_DEBUG
- "%s: Nibble timeout at event 9 (%d bytes)\n",
- port->name, i/2);
+ pr_debug("%s: Nibble timeout at event 9 (%d bytes)\n",
+ port->name, i / 2);
parport_frob_control (port, PARPORT_CONTROL_AUTOFD, 0);
break;
}
@@ -201,8 +194,7 @@ size_t parport_ieee1284_read_nibble (struct parport *port,
PARPORT_STATUS_ACK,
PARPORT_STATUS_ACK)) {
/* Timeout -- no more data? */
- DPRINTK (KERN_DEBUG
- "%s: Nibble timeout at event 11\n",
+ pr_debug("%s: Nibble timeout at event 11\n",
port->name);
break;
}
@@ -219,9 +211,8 @@ size_t parport_ieee1284_read_nibble (struct parport *port,
/* Read the last nibble without checking data avail. */
if (parport_read_status (port) & PARPORT_STATUS_ERROR) {
end_of_data:
- DPRINTK (KERN_DEBUG
- "%s: No more nibble data (%d bytes)\n",
- port->name, i/2);
+ pr_debug("%s: No more nibble data (%d bytes)\n",
+ port->name, i / 2);
/* Go to reverse idle phase. */
parport_frob_control (port,
@@ -272,8 +263,7 @@ size_t parport_ieee1284_read_byte (struct parport *port,
/* Timeout -- no more data? */
parport_frob_control (port, PARPORT_CONTROL_AUTOFD,
0);
- DPRINTK (KERN_DEBUG "%s: Byte timeout at event 9\n",
- port->name);
+ pr_debug("%s: Byte timeout at event 9\n", port->name);
break;
}
@@ -288,8 +278,7 @@ size_t parport_ieee1284_read_byte (struct parport *port,
PARPORT_STATUS_ACK,
PARPORT_STATUS_ACK)) {
/* Timeout -- no more data? */
- DPRINTK (KERN_DEBUG "%s: Byte timeout at event 11\n",
- port->name);
+ pr_debug("%s: Byte timeout at event 11\n", port->name);
break;
}
@@ -307,8 +296,7 @@ size_t parport_ieee1284_read_byte (struct parport *port,
/* Read the last byte without checking data avail. */
if (parport_read_status (port) & PARPORT_STATUS_ERROR) {
end_of_data:
- DPRINTK (KERN_DEBUG
- "%s: No more byte data (%zd bytes)\n",
+ pr_debug("%s: No more byte data (%zd bytes)\n",
port->name, count);
/* Go to reverse idle phase. */
@@ -353,12 +341,10 @@ int ecp_forward_to_reverse (struct parport *port)
PARPORT_STATUS_PAPEROUT, 0);
if (!retval) {
- DPRINTK (KERN_DEBUG "%s: ECP direction: reverse\n",
- port->name);
+ pr_debug("%s: ECP direction: reverse\n", port->name);
port->ieee1284.phase = IEEE1284_PH_REV_IDLE;
} else {
- DPRINTK (KERN_DEBUG "%s: ECP direction: failed to reverse\n",
- port->name);
+ pr_debug("%s: ECP direction: failed to reverse\n", port->name);
port->ieee1284.phase = IEEE1284_PH_ECP_DIR_UNKNOWN;
}
@@ -384,12 +370,10 @@ int ecp_reverse_to_forward (struct parport *port)
if (!retval) {
parport_data_forward (port);
- DPRINTK (KERN_DEBUG "%s: ECP direction: forward\n",
- port->name);
+ pr_debug("%s: ECP direction: forward\n", port->name);
port->ieee1284.phase = IEEE1284_PH_FWD_IDLE;
} else {
- DPRINTK (KERN_DEBUG
- "%s: ECP direction: failed to switch forward\n",
+ pr_debug("%s: ECP direction: failed to switch forward\n",
port->name);
port->ieee1284.phase = IEEE1284_PH_ECP_DIR_UNKNOWN;
}
@@ -450,7 +434,7 @@ size_t parport_ieee1284_ecp_write_data (struct parport *port,
}
/* Time for Host Transfer Recovery (page 41 of IEEE1284) */
- DPRINTK (KERN_DEBUG "%s: ECP transfer stalled!\n", port->name);
+ pr_debug("%s: ECP transfer stalled!\n", port->name);
parport_frob_control (port, PARPORT_CONTROL_INIT,
PARPORT_CONTROL_INIT);
@@ -466,8 +450,7 @@ size_t parport_ieee1284_ecp_write_data (struct parport *port,
if (!(parport_read_status (port) & PARPORT_STATUS_PAPEROUT))
break;
- DPRINTK (KERN_DEBUG "%s: Host transfer recovered\n",
- port->name);
+ pr_debug("%s: Host transfer recovered\n", port->name);
if (time_after_eq (jiffies, expire)) break;
goto try_again;
@@ -565,23 +548,20 @@ size_t parport_ieee1284_ecp_read_data (struct parport *port,
command or a normal data byte, don't accept it. */
if (command) {
if (byte & 0x80) {
- DPRINTK (KERN_DEBUG "%s: stopping short at "
- "channel command (%02x)\n",
+ pr_debug("%s: stopping short at channel command (%02x)\n",
port->name, byte);
goto out;
}
else if (port->ieee1284.mode != IEEE1284_MODE_ECPRLE)
- DPRINTK (KERN_DEBUG "%s: device illegally "
- "using RLE; accepting anyway\n",
+ pr_debug("%s: device illegally using RLE; accepting anyway\n",
port->name);
rle_count = byte + 1;
/* Are we allowed to read that many bytes? */
if (rle_count > (len - count)) {
- DPRINTK (KERN_DEBUG "%s: leaving %d RLE bytes "
- "for next time\n", port->name,
- rle_count);
+ pr_debug("%s: leaving %d RLE bytes for next time\n",
+ port->name, rle_count);
break;
}
@@ -596,7 +576,7 @@ size_t parport_ieee1284_ecp_read_data (struct parport *port,
PARPORT_STATUS_ACK)) {
/* It's gone wrong. Return what data we have
to the caller. */
- DPRINTK (KERN_DEBUG "ECP read timed out at 45\n");
+ pr_debug("ECP read timed out at 45\n");
if (command)
printk (KERN_WARNING
@@ -620,7 +600,7 @@ size_t parport_ieee1284_ecp_read_data (struct parport *port,
memset (buf, byte, rle_count);
buf += rle_count;
count += rle_count;
- DPRINTK (KERN_DEBUG "%s: decompressed to %d bytes\n",
+ pr_debug("%s: decompressed to %d bytes\n",
port->name, rle_count);
} else {
/* Normal data byte. */
@@ -686,7 +666,7 @@ size_t parport_ieee1284_ecp_write_addr (struct parport *port,
}
/* Time for Host Transfer Recovery (page 41 of IEEE1284) */
- DPRINTK (KERN_DEBUG "%s: ECP transfer stalled!\n", port->name);
+ pr_debug("%s: ECP transfer stalled!\n", port->name);
parport_frob_control (port, PARPORT_CONTROL_INIT,
PARPORT_CONTROL_INIT);
@@ -702,8 +682,7 @@ size_t parport_ieee1284_ecp_write_addr (struct parport *port,
if (!(parport_read_status (port) & PARPORT_STATUS_PAPEROUT))
break;
- DPRINTK (KERN_DEBUG "%s: Host transfer recovered\n",
- port->name);
+ pr_debug("%s: Host transfer recovered\n", port->name);
if (time_after_eq (jiffies, expire)) break;
goto try_again;
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-23 18:02:02 +0000