summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--arch/powerpc/platforms/512x/mpc512x_shared.c22
-rw-r--r--arch/powerpc/platforms/85xx/p1022_ds.c47
-rw-r--r--arch/powerpc/platforms/86xx/mpc8610_hpcd.c55
-rw-r--r--arch/powerpc/sysdev/fsl_soc.h25
-rw-r--r--drivers/video/Kconfig16
-rw-r--r--drivers/video/Makefile1
-rw-r--r--drivers/video/au1200fb.c297
-rw-r--r--drivers/video/backlight/adp8860_bl.c1
-rw-r--r--drivers/video/backlight/adp8870_bl.c1
-rw-r--r--drivers/video/carminefb.c6
-rw-r--r--drivers/video/controlfb.c2
-rw-r--r--drivers/video/da8xx-fb.c151
-rw-r--r--drivers/video/fb_defio.c3
-rw-r--r--drivers/video/fsl-diu-fb.c74
-rw-r--r--drivers/video/grvga.c579
-rw-r--r--drivers/video/msm/mdp.c4
-rw-r--r--drivers/video/platinumfb.c2
-rw-r--r--drivers/video/pm2fb.c2
-rw-r--r--drivers/video/pm3fb.c2
-rw-r--r--drivers/video/pxa3xx-gcu.c2
-rw-r--r--drivers/video/s3c2410fb.c1
-rw-r--r--drivers/video/s3fb.c2
-rw-r--r--drivers/video/skeletonfb.c2
-rw-r--r--drivers/video/udlfb.c21
-rw-r--r--drivers/video/valkyriefb.c2
-rw-r--r--drivers/video/via/via_modesetting.h5
-rw-r--r--drivers/video/via/viafbdev.c16
-rw-r--r--drivers/video/xilinxfb.c1
28 files changed, 1039 insertions, 303 deletions
diff --git a/arch/powerpc/platforms/512x/mpc512x_shared.c b/arch/powerpc/platforms/512x/mpc512x_shared.c
index e41ebbdb3e12..3dc62f907a1e 100644
--- a/arch/powerpc/platforms/512x/mpc512x_shared.c
+++ b/arch/powerpc/platforms/512x/mpc512x_shared.c
@@ -66,8 +66,8 @@ struct fsl_diu_shared_fb {
bool in_use;
};
-unsigned int mpc512x_get_pixel_format(unsigned int bits_per_pixel,
- int monitor_port)
+u32 mpc512x_get_pixel_format(enum fsl_diu_monitor_port port,
+ unsigned int bits_per_pixel)
{
switch (bits_per_pixel) {
case 32:
@@ -80,11 +80,12 @@ unsigned int mpc512x_get_pixel_format(unsigned int bits_per_pixel,
return 0x00000400;
}
-void mpc512x_set_gamma_table(int monitor_port, char *gamma_table_base)
+void mpc512x_set_gamma_table(enum fsl_diu_monitor_port port,
+ char *gamma_table_base)
{
}
-void mpc512x_set_monitor_port(int monitor_port)
+void mpc512x_set_monitor_port(enum fsl_diu_monitor_port port)
{
}
@@ -182,14 +183,10 @@ void mpc512x_set_pixel_clock(unsigned int pixclock)
iounmap(ccm);
}
-ssize_t mpc512x_show_monitor_port(int monitor_port, char *buf)
+enum fsl_diu_monitor_port
+mpc512x_valid_monitor_port(enum fsl_diu_monitor_port port)
{
- return sprintf(buf, "0 - 5121 LCD\n");
-}
-
-int mpc512x_set_sysfs_monitor_port(int val)
-{
- return 0;
+ return FSL_DIU_PORT_DVI;
}
static struct fsl_diu_shared_fb __attribute__ ((__aligned__(8))) diu_shared_fb;
@@ -332,8 +329,7 @@ void __init mpc512x_setup_diu(void)
diu_ops.set_gamma_table = mpc512x_set_gamma_table;
diu_ops.set_monitor_port = mpc512x_set_monitor_port;
diu_ops.set_pixel_clock = mpc512x_set_pixel_clock;
- diu_ops.show_monitor_port = mpc512x_show_monitor_port;
- diu_ops.set_sysfs_monitor_port = mpc512x_set_sysfs_monitor_port;
+ diu_ops.valid_monitor_port = mpc512x_valid_monitor_port;
diu_ops.release_bootmem = mpc512x_release_bootmem;
#endif
}
diff --git a/arch/powerpc/platforms/85xx/p1022_ds.c b/arch/powerpc/platforms/85xx/p1022_ds.c
index 266b3aadfe5e..c01c7277888c 100644
--- a/arch/powerpc/platforms/85xx/p1022_ds.c
+++ b/arch/powerpc/platforms/85xx/p1022_ds.c
@@ -93,8 +93,8 @@
* The Area Descriptor is a 32-bit value that determine which bits in each
* pixel are to be used for each color.
*/
-static unsigned int p1022ds_get_pixel_format(unsigned int bits_per_pixel,
- int monitor_port)
+static u32 p1022ds_get_pixel_format(enum fsl_diu_monitor_port port,
+ unsigned int bits_per_pixel)
{
switch (bits_per_pixel) {
case 32:
@@ -118,7 +118,8 @@ static unsigned int p1022ds_get_pixel_format(unsigned int bits_per_pixel,
* On some boards, the gamma table for some ports may need to be modified.
* This is not the case on the P1022DS, so we do nothing.
*/
-static void p1022ds_set_gamma_table(int monitor_port, char *gamma_table_base)
+static void p1022ds_set_gamma_table(enum fsl_diu_monitor_port port,
+ char *gamma_table_base)
{
}
@@ -126,7 +127,7 @@ static void p1022ds_set_gamma_table(int monitor_port, char *gamma_table_base)
* p1022ds_set_monitor_port: switch the output to a different monitor port
*
*/
-static void p1022ds_set_monitor_port(int monitor_port)
+static void p1022ds_set_monitor_port(enum fsl_diu_monitor_port port)
{
struct device_node *pixis_node;
void __iomem *pixis;
@@ -145,19 +146,21 @@ static void p1022ds_set_monitor_port(int monitor_port)
}
brdcfg1 = pixis + 9; /* BRDCFG1 is at offset 9 in the ngPIXIS */
- switch (monitor_port) {
- case 0: /* DVI */
+ switch (port) {
+ case FSL_DIU_PORT_DVI:
+ printk(KERN_INFO "%s:%u\n", __func__, __LINE__);
/* Enable the DVI port, disable the DFP and the backlight */
clrsetbits_8(brdcfg1, PX_BRDCFG1_DFPEN | PX_BRDCFG1_BACKLIGHT,
PX_BRDCFG1_DVIEN);
break;
- case 1: /* Single link LVDS */
+ case FSL_DIU_PORT_LVDS:
+ printk(KERN_INFO "%s:%u\n", __func__, __LINE__);
/* Enable the DFP port, disable the DVI and the backlight */
clrsetbits_8(brdcfg1, PX_BRDCFG1_DVIEN | PX_BRDCFG1_BACKLIGHT,
PX_BRDCFG1_DFPEN);
break;
default:
- pr_err("p1022ds: unsupported monitor port %i\n", monitor_port);
+ pr_err("p1022ds: unsupported monitor port %i\n", port);
}
iounmap(pixis);
@@ -214,23 +217,18 @@ void p1022ds_set_pixel_clock(unsigned int pixclock)
}
/**
- * p1022ds_show_monitor_port: show the current monitor
- *
- * This function returns a string indicating whether the current monitor is
- * set to DVI or LVDS.
- */
-ssize_t p1022ds_show_monitor_port(int monitor_port, char *buf)
-{
- return sprintf(buf, "%c0 - DVI\n%c1 - Single link LVDS\n",
- monitor_port == 0 ? '*' : ' ', monitor_port == 1 ? '*' : ' ');
-}
-
-/**
- * p1022ds_set_sysfs_monitor_port: set the monitor port for sysfs
+ * p1022ds_valid_monitor_port: set the monitor port for sysfs
*/
-int p1022ds_set_sysfs_monitor_port(int val)
+enum fsl_diu_monitor_port
+p1022ds_valid_monitor_port(enum fsl_diu_monitor_port port)
{
- return val < 2 ? val : 0;
+ switch (port) {
+ case FSL_DIU_PORT_DVI:
+ case FSL_DIU_PORT_LVDS:
+ return port;
+ default:
+ return FSL_DIU_PORT_DVI; /* Dual-link LVDS is not supported */
+ }
}
#endif
@@ -305,8 +303,7 @@ static void __init p1022_ds_setup_arch(void)
diu_ops.set_gamma_table = p1022ds_set_gamma_table;
diu_ops.set_monitor_port = p1022ds_set_monitor_port;
diu_ops.set_pixel_clock = p1022ds_set_pixel_clock;
- diu_ops.show_monitor_port = p1022ds_show_monitor_port;
- diu_ops.set_sysfs_monitor_port = p1022ds_set_sysfs_monitor_port;
+ diu_ops.valid_monitor_port = p1022ds_valid_monitor_port;
#endif
#ifdef CONFIG_SMP
diff --git a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
index 74e018ef724b..13fa9a6403e6 100644
--- a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
+++ b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
@@ -152,10 +152,10 @@ machine_device_initcall(mpc86xx_hpcd, mpc8610_declare_of_platform_devices);
(c2 << AD_COMP_2_SHIFT) | (c1 << AD_COMP_1_SHIFT) | \
(c0 << AD_COMP_0_SHIFT) | (size << AD_PIXEL_S_SHIFT))
-unsigned int mpc8610hpcd_get_pixel_format(unsigned int bits_per_pixel,
- int monitor_port)
+u32 mpc8610hpcd_get_pixel_format(enum fsl_diu_monitor_port port,
+ unsigned int bits_per_pixel)
{
- static const unsigned long pixelformat[][3] = {
+ static const u32 pixelformat[][3] = {
{
MAKE_AD(3, 0, 2, 1, 3, 8, 8, 8, 8),
MAKE_AD(4, 2, 0, 1, 2, 8, 8, 8, 0),
@@ -170,7 +170,8 @@ unsigned int mpc8610hpcd_get_pixel_format(unsigned int bits_per_pixel,
unsigned int arch_monitor;
/* The DVI port is mis-wired on revision 1 of this board. */
- arch_monitor = ((*pixis_arch == 0x01) && (monitor_port == 0))? 0 : 1;
+ arch_monitor =
+ ((*pixis_arch == 0x01) && (port == FSL_DIU_PORT_DVI)) ? 0 : 1;
switch (bits_per_pixel) {
case 32:
@@ -185,10 +186,11 @@ unsigned int mpc8610hpcd_get_pixel_format(unsigned int bits_per_pixel,
}
}
-void mpc8610hpcd_set_gamma_table(int monitor_port, char *gamma_table_base)
+void mpc8610hpcd_set_gamma_table(enum fsl_diu_monitor_port port,
+ char *gamma_table_base)
{
int i;
- if (monitor_port == 2) { /* dual link LVDS */
+ if (port == FSL_DIU_PORT_DLVDS) {
for (i = 0; i < 256*3; i++)
gamma_table_base[i] = (gamma_table_base[i] << 2) |
((gamma_table_base[i] >> 6) & 0x03);
@@ -199,17 +201,21 @@ void mpc8610hpcd_set_gamma_table(int monitor_port, char *gamma_table_base)
#define PX_BRDCFG0_DLINK (1 << 4)
#define PX_BRDCFG0_DIU_MASK (PX_BRDCFG0_DVISEL | PX_BRDCFG0_DLINK)
-void mpc8610hpcd_set_monitor_port(int monitor_port)
+void mpc8610hpcd_set_monitor_port(enum fsl_diu_monitor_port port)
{
- static const u8 bdcfg[] = {
- PX_BRDCFG0_DVISEL | PX_BRDCFG0_DLINK,
- PX_BRDCFG0_DLINK,
- 0,
- };
-
- if (monitor_port < 3)
+ switch (port) {
+ case FSL_DIU_PORT_DVI:
clrsetbits_8(pixis_bdcfg0, PX_BRDCFG0_DIU_MASK,
- bdcfg[monitor_port]);
+ PX_BRDCFG0_DVISEL | PX_BRDCFG0_DLINK);
+ break;
+ case FSL_DIU_PORT_LVDS:
+ clrsetbits_8(pixis_bdcfg0, PX_BRDCFG0_DIU_MASK,
+ PX_BRDCFG0_DLINK);
+ break;
+ case FSL_DIU_PORT_DLVDS:
+ clrbits8(pixis_bdcfg0, PX_BRDCFG0_DIU_MASK);
+ break;
+ }
}
/**
@@ -262,20 +268,10 @@ void mpc8610hpcd_set_pixel_clock(unsigned int pixclock)
iounmap(guts);
}
-ssize_t mpc8610hpcd_show_monitor_port(int monitor_port, char *buf)
-{
- return snprintf(buf, PAGE_SIZE,
- "%c0 - DVI\n"
- "%c1 - Single link LVDS\n"
- "%c2 - Dual link LVDS\n",
- monitor_port == 0 ? '*' : ' ',
- monitor_port == 1 ? '*' : ' ',
- monitor_port == 2 ? '*' : ' ');
-}
-
-int mpc8610hpcd_set_sysfs_monitor_port(int val)
+enum fsl_diu_monitor_port
+mpc8610hpcd_valid_monitor_port(enum fsl_diu_monitor_port port)
{
- return val < 3 ? val : 0;
+ return port;
}
#endif
@@ -307,8 +303,7 @@ static void __init mpc86xx_hpcd_setup_arch(void)
diu_ops.set_gamma_table = mpc8610hpcd_set_gamma_table;
diu_ops.set_monitor_port = mpc8610hpcd_set_monitor_port;
diu_ops.set_pixel_clock = mpc8610hpcd_set_pixel_clock;
- diu_ops.show_monitor_port = mpc8610hpcd_show_monitor_port;
- diu_ops.set_sysfs_monitor_port = mpc8610hpcd_set_sysfs_monitor_port;
+ diu_ops.valid_monitor_port = mpc8610hpcd_valid_monitor_port;
#endif
pixis_node = of_find_compatible_node(NULL, NULL, "fsl,fpga-pixis");
diff --git a/arch/powerpc/sysdev/fsl_soc.h b/arch/powerpc/sysdev/fsl_soc.h
index 2ece02beb8ff..c6d00736f07f 100644
--- a/arch/powerpc/sysdev/fsl_soc.h
+++ b/arch/powerpc/sysdev/fsl_soc.h
@@ -22,15 +22,24 @@ struct device_node;
extern void fsl_rstcr_restart(char *cmd);
#if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE)
+
+/* The different ports that the DIU can be connected to */
+enum fsl_diu_monitor_port {
+ FSL_DIU_PORT_DVI, /* DVI */
+ FSL_DIU_PORT_LVDS, /* Single-link LVDS */
+ FSL_DIU_PORT_DLVDS /* Dual-link LVDS */
+};
+
struct platform_diu_data_ops {
- unsigned int (*get_pixel_format) (unsigned int bits_per_pixel,
- int monitor_port);
- void (*set_gamma_table) (int monitor_port, char *gamma_table_base);
- void (*set_monitor_port) (int monitor_port);
- void (*set_pixel_clock) (unsigned int pixclock);
- ssize_t (*show_monitor_port) (int monitor_port, char *buf);
- int (*set_sysfs_monitor_port) (int val);
- void (*release_bootmem) (void);
+ u32 (*get_pixel_format)(enum fsl_diu_monitor_port port,
+ unsigned int bpp);
+ void (*set_gamma_table)(enum fsl_diu_monitor_port port,
+ char *gamma_table_base);
+ void (*set_monitor_port)(enum fsl_diu_monitor_port port);
+ void (*set_pixel_clock)(unsigned int pixclock);
+ enum fsl_diu_monitor_port (*valid_monitor_port)
+ (enum fsl_diu_monitor_port port);
+ void (*release_bootmem)(void);
};
extern struct platform_diu_data_ops diu_ops;
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 963b8b767b83..903ace58fec5 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -259,6 +259,15 @@ config FB_TILEBLITTING
comment "Frame buffer hardware drivers"
depends on FB
+config FB_GRVGA
+ tristate "Aeroflex Gaisler framebuffer support"
+ depends on FB && SPARC
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ ---help---
+ This enables support for the SVGACTRL framebuffer in the GRLIB IP library from Aeroflex Gaisler.
+
config FB_CIRRUS
tristate "Cirrus Logic support"
depends on FB && (ZORRO || PCI)
@@ -1756,9 +1765,10 @@ config FB_AU1100
config FB_AU1200
bool "Au1200 LCD Driver"
depends on (FB = y) && MIPS && SOC_AU1200
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
+ select FB_SYS_FILLRECT
+ select FB_SYS_COPYAREA
+ select FB_SYS_IMAGEBLIT
+ select FB_SYS_FOPS
help
This is the framebuffer driver for the AMD Au1200 SOC. It can drive
various panels and CRTs by passing in kernel cmd line option
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index 8b83129e209c..43079108bb16 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -33,6 +33,7 @@ obj-$(CONFIG_FB_AMIGA) += amifb.o c2p_planar.o
obj-$(CONFIG_FB_ARC) += arcfb.o
obj-$(CONFIG_FB_CLPS711X) += clps711xfb.o
obj-$(CONFIG_FB_CYBER2000) += cyber2000fb.o
+obj-$(CONFIG_FB_GRVGA) += grvga.o
obj-$(CONFIG_FB_PM2) += pm2fb.o
obj-$(CONFIG_FB_PM3) += pm3fb.o
diff --git a/drivers/video/au1200fb.c b/drivers/video/au1200fb.c
index 5dff32ac8044..ed5dcdb29cf7 100644
--- a/drivers/video/au1200fb.c
+++ b/drivers/video/au1200fb.c
@@ -46,14 +46,6 @@
#include <asm/mach-au1x00/au1000.h>
#include "au1200fb.h"
-#ifdef CONFIG_PM
-#include <asm/mach-au1x00/au1xxx_pm.h>
-#endif
-
-#ifndef CONFIG_FB_AU1200_DEVS
-#define CONFIG_FB_AU1200_DEVS 4
-#endif
-
#define DRIVER_NAME "au1200fb"
#define DRIVER_DESC "LCD controller driver for AU1200 processors"
@@ -150,7 +142,7 @@ struct au1200_lcd_iodata_t {
/* Private, per-framebuffer management information (independent of the panel itself) */
struct au1200fb_device {
- struct fb_info fb_info; /* FB driver info record */
+ struct fb_info *fb_info; /* FB driver info record */
int plane;
unsigned char* fb_mem; /* FrameBuffer memory map */
@@ -158,7 +150,6 @@ struct au1200fb_device {
dma_addr_t fb_phys;
};
-static struct au1200fb_device _au1200fb_devices[CONFIG_FB_AU1200_DEVS];
/********************************************************************/
/* LCD controller restrictions */
@@ -171,10 +162,18 @@ static struct au1200fb_device _au1200fb_devices[CONFIG_FB_AU1200_DEVS];
/* Default number of visible screen buffer to allocate */
#define AU1200FB_NBR_VIDEO_BUFFERS 1
+/* Default maximum number of fb devices to create */
+#define MAX_DEVICE_COUNT 4
+
+/* Default window configuration entry to use (see windows[]) */
+#define DEFAULT_WINDOW_INDEX 2
+
/********************************************************************/
+static struct fb_info *_au1200fb_infos[MAX_DEVICE_COUNT];
static struct au1200_lcd *lcd = (struct au1200_lcd *) AU1200_LCD_ADDR;
-static int window_index = 2; /* default is zero */
+static int device_count = MAX_DEVICE_COUNT;
+static int window_index = DEFAULT_WINDOW_INDEX; /* default is zero */
static int panel_index = 2; /* default is zero */
static struct window_settings *win;
static struct panel_settings *panel;
@@ -205,12 +204,6 @@ struct window_settings {
extern int board_au1200fb_panel_init (void);
extern int board_au1200fb_panel_shutdown (void);
-#ifdef CONFIG_PM
-int au1200fb_pm_callback(au1xxx_power_dev_t *dev,
- au1xxx_request_t request, void *data);
-au1xxx_power_dev_t *LCD_pm_dev;
-#endif
-
/*
* Default window configurations
*/
@@ -652,25 +645,6 @@ static struct panel_settings known_lcd_panels[] =
/********************************************************************/
-#ifdef CONFIG_PM
-static int set_brightness(unsigned int brightness)
-{
- unsigned int hi1, divider;
-
- /* limit brightness pwm duty to >= 30/1600 */
- if (brightness < 30) {
- brightness = 30;
- }
- divider = (lcd->pwmdiv & 0x3FFFF) + 1;
- hi1 = (lcd->pwmhi >> 16) + 1;
- hi1 = (((brightness & 0xFF) + 1) * divider >> 8);
- lcd->pwmhi &= 0xFFFF;
- lcd->pwmhi |= (hi1 << 16);
-
- return brightness;
-}
-#endif /* CONFIG_PM */
-
static int winbpp (unsigned int winctrl1)
{
int bits = 0;
@@ -712,8 +686,8 @@ static int fbinfo2index (struct fb_info *fb_info)
{
int i;
- for (i = 0; i < CONFIG_FB_AU1200_DEVS; ++i) {
- if (fb_info == (struct fb_info *)(&_au1200fb_devices[i].fb_info))
+ for (i = 0; i < device_count; ++i) {
+ if (fb_info == _au1200fb_infos[i])
return i;
}
printk("au1200fb: ERROR: fbinfo2index failed!\n");
@@ -962,7 +936,7 @@ static void au1200_setmode(struct au1200fb_device *fbdev)
lcd->window[plane].winctrl2 = ( 0
| LCD_WINCTRL2_CKMODE_00
| LCD_WINCTRL2_DBM
- | LCD_WINCTRL2_BX_N( fbdev->fb_info.fix.line_length)
+ | LCD_WINCTRL2_BX_N(fbdev->fb_info->fix.line_length)
| LCD_WINCTRL2_SCX_1
| LCD_WINCTRL2_SCY_1
) ;
@@ -1050,7 +1024,7 @@ static void au1200fb_update_fbinfo(struct fb_info *fbi)
static int au1200fb_fb_check_var(struct fb_var_screeninfo *var,
struct fb_info *fbi)
{
- struct au1200fb_device *fbdev = (struct au1200fb_device *)fbi;
+ struct au1200fb_device *fbdev = fbi->par;
u32 pixclock;
int screen_size, plane;
@@ -1142,7 +1116,7 @@ static int au1200fb_fb_check_var(struct fb_var_screeninfo *var,
*/
static int au1200fb_fb_set_par(struct fb_info *fbi)
{
- struct au1200fb_device *fbdev = (struct au1200fb_device *)fbi;
+ struct au1200fb_device *fbdev = fbi->par;
au1200fb_update_fbinfo(fbi);
au1200_setmode(fbdev);
@@ -1246,11 +1220,7 @@ static int au1200fb_fb_mmap(struct fb_info *info, struct vm_area_struct *vma)
{
unsigned int len;
unsigned long start=0, off;
- struct au1200fb_device *fbdev = (struct au1200fb_device *) info;
-
-#ifdef CONFIG_PM
- au1xxx_pm_access(LCD_pm_dev);
-#endif
+ struct au1200fb_device *fbdev = info->par;
if (vma->vm_pgoff > (~0UL >> PAGE_SHIFT)) {
return -EINVAL;
@@ -1461,10 +1431,6 @@ static int au1200fb_ioctl(struct fb_info *info, unsigned int cmd,
int plane;
int val;
-#ifdef CONFIG_PM
- au1xxx_pm_access(LCD_pm_dev);
-#endif
-
plane = fbinfo2index(info);
print_dbg("au1200fb: ioctl %d on plane %d\n", cmd, plane);
@@ -1536,9 +1502,11 @@ static struct fb_ops au1200fb_fb_ops = {
.fb_set_par = au1200fb_fb_set_par,
.fb_setcolreg = au1200fb_fb_setcolreg,
.fb_blank = au1200fb_fb_blank,
- .fb_fillrect = cfb_fillrect,
- .fb_copyarea = cfb_copyarea,
- .fb_imageblit = cfb_imageblit,
+ .fb_fillrect = sys_fillrect,
+ .fb_copyarea = sys_copyarea,
+ .fb_imageblit = sys_imageblit,
+ .fb_read = fb_sys_read,
+ .fb_write = fb_sys_write,
.fb_sync = NULL,
.fb_ioctl = au1200fb_ioctl,
.fb_mmap = au1200fb_fb_mmap,
@@ -1561,10 +1529,9 @@ static irqreturn_t au1200fb_handle_irq(int irq, void* dev_id)
static int au1200fb_init_fbinfo(struct au1200fb_device *fbdev)
{
- struct fb_info *fbi = &fbdev->fb_info;
+ struct fb_info *fbi = fbdev->fb_info;
int bpp;
- memset(fbi, 0, sizeof(struct fb_info));
fbi->fbops = &au1200fb_fb_ops;
bpp = winbpp(win->w[fbdev->plane].mode_winctrl1);
@@ -1623,24 +1590,36 @@ static int au1200fb_init_fbinfo(struct au1200fb_device *fbdev)
/* AU1200 LCD controller device driver */
-static int au1200fb_drv_probe(struct platform_device *dev)
+static int __devinit au1200fb_drv_probe(struct platform_device *dev)
{
struct au1200fb_device *fbdev;
+ struct fb_info *fbi = NULL;
unsigned long page;
- int bpp, plane, ret;
+ int bpp, plane, ret, irq;
- if (!dev)
- return -EINVAL;
+ /* shut gcc up */
+ ret = 0;
+ fbdev = NULL;
+
+ /* Kickstart the panel */
+ au1200_setpanel(panel);
- for (plane = 0; plane < CONFIG_FB_AU1200_DEVS; ++plane) {
+ for (plane = 0; plane < device_count; ++plane) {
bpp = winbpp(win->w[plane].mode_winctrl1);
if (win->w[plane].xres == 0)
win->w[plane].xres = panel->Xres;
if (win->w[plane].yres == 0)
win->w[plane].yres = panel->Yres;
- fbdev = &_au1200fb_devices[plane];
- memset(fbdev, 0, sizeof(struct au1200fb_device));
+ fbi = framebuffer_alloc(sizeof(struct au1200fb_device),
+ &dev->dev);
+ if (!fbi)
+ goto failed;
+
+ _au1200fb_infos[plane] = fbi;
+ fbdev = fbi->par;
+ fbdev->fb_info = fbi;
+
fbdev->plane = plane;
/* Allocate the framebuffer to the maximum screen size */
@@ -1673,30 +1652,31 @@ static int au1200fb_drv_probe(struct platform_device *dev)
goto failed;
/* Register new framebuffer */
- if ((ret = register_framebuffer(&fbdev->fb_info)) < 0) {
+ ret = register_framebuffer(fbi);
+ if (ret < 0) {
print_err("cannot register new framebuffer");
goto failed;
}
- au1200fb_fb_set_par(&fbdev->fb_info);
+ au1200fb_fb_set_par(fbi);
#if !defined(CONFIG_FRAMEBUFFER_CONSOLE) && defined(CONFIG_LOGO)
if (plane == 0)
- if (fb_prepare_logo(&fbdev->fb_info, FB_ROTATE_UR)) {
+ if (fb_prepare_logo(fbi, FB_ROTATE_UR)) {
/* Start display and show logo on boot */
- fb_set_cmap(&fbdev->fb_info.cmap,
- &fbdev->fb_info);
-
- fb_show_logo(&fbdev->fb_info, FB_ROTATE_UR);
+ fb_set_cmap(&fbi->cmap, fbi);
+ fb_show_logo(fbi, FB_ROTATE_UR);
}
#endif
}
/* Now hook interrupt too */
- if ((ret = request_irq(AU1200_LCD_INT, au1200fb_handle_irq,
- IRQF_DISABLED | IRQF_SHARED, "lcd", (void *)dev)) < 0) {
+ irq = platform_get_irq(dev, 0);
+ ret = request_irq(irq, au1200fb_handle_irq,
+ IRQF_DISABLED | IRQF_SHARED, "lcd", (void *)dev);
+ if (ret) {
print_err("fail to request interrupt line %d (err: %d)",
- AU1200_LCD_INT, ret);
+ irq, ret);
goto failed;
}
@@ -1705,84 +1685,108 @@ static int au1200fb_drv_probe(struct platform_device *dev)
failed:
/* NOTE: This only does the current plane/window that failed; others are still active */
if (fbdev->fb_mem)
- dma_free_noncoherent(dev, PAGE_ALIGN(fbdev->fb_len),
+ dma_free_noncoherent(&dev->dev, PAGE_ALIGN(fbdev->fb_len),
fbdev->fb_mem, fbdev->fb_phys);
- if (fbdev->fb_info.cmap.len != 0)
- fb_dealloc_cmap(&fbdev->fb_info.cmap);
- if (fbdev->fb_info.pseudo_palette)
- kfree(fbdev->fb_info.pseudo_palette);
+ if (fbi) {
+ if (fbi->cmap.len != 0)
+ fb_dealloc_cmap(&fbi->cmap);
+ kfree(fbi->pseudo_palette);
+ }
if (plane == 0)
free_irq(AU1200_LCD_INT, (void*)dev);
return ret;
}
-static int au1200fb_drv_remove(struct platform_device *dev)
+static int __devexit au1200fb_drv_remove(struct platform_device *dev)
{
struct au1200fb_device *fbdev;
+ struct fb_info *fbi;
int plane;
- if (!dev)
- return -ENODEV;
-
/* Turn off the panel */
au1200_setpanel(NULL);
- for (plane = 0; plane < CONFIG_FB_AU1200_DEVS; ++plane)
- {
- fbdev = &_au1200fb_devices[plane];
+ for (plane = 0; plane < device_count; ++plane) {
+ fbi = _au1200fb_infos[plane];
+ fbdev = fbi->par;
/* Clean up all probe data */
- unregister_framebuffer(&fbdev->fb_info);
+ unregister_framebuffer(fbi);
if (fbdev->fb_mem)
dma_free_noncoherent(&dev->dev,
PAGE_ALIGN(fbdev->fb_len),
fbdev->fb_mem, fbdev->fb_phys);
- if (fbdev->fb_info.cmap.len != 0)
- fb_dealloc_cmap(&fbdev->fb_info.cmap);
- if (fbdev->fb_info.pseudo_palette)
- kfree(fbdev->fb_info.pseudo_palette);
+ if (fbi->cmap.len != 0)
+ fb_dealloc_cmap(&fbi->cmap);
+ kfree(fbi->pseudo_palette);
+
+ framebuffer_release(fbi);
+ _au1200fb_infos[plane] = NULL;
}
- free_irq(AU1200_LCD_INT, (void *)dev);
+ free_irq(platform_get_irq(dev, 0), (void *)dev);
return 0;
}
#ifdef CONFIG_PM
-static int au1200fb_drv_suspend(struct platform_device *dev, u32 state)
+static int au1200fb_drv_suspend(struct device *dev)
{
- /* TODO */
+ au1200_setpanel(NULL);
+
+ lcd->outmask = 0;
+ au_sync();
+
return 0;
}
-static int au1200fb_drv_resume(struct platform_device *dev)
+static int au1200fb_drv_resume(struct device *dev)
{
- /* TODO */
+ struct fb_info *fbi;
+ int i;
+
+ /* Kickstart the panel */
+ au1200_setpanel(panel);
+
+ for (i = 0; i < device_count; i++) {
+ fbi = _au1200fb_infos[i];
+ au1200fb_fb_set_par(fbi);
+ }
+
return 0;
}
+
+static const struct dev_pm_ops au1200fb_pmops = {
+ .suspend = au1200fb_drv_suspend,
+ .resume = au1200fb_drv_resume,
+ .freeze = au1200fb_drv_suspend,
+ .thaw = au1200fb_drv_resume,
+};
+
+#define AU1200FB_PMOPS (&au1200fb_pmops)
+
+#else
+#define AU1200FB_PMOPS NULL
#endif /* CONFIG_PM */
static struct platform_driver au1200fb_driver = {
.driver = {
- .name = "au1200-lcd",
- .owner = THIS_MODULE,
+ .name = "au1200-lcd",
+ .owner = THIS_MODULE,
+ .pm = AU1200FB_PMOPS,
},
.probe = au1200fb_drv_probe,
- .remove = au1200fb_drv_remove,
-#ifdef CONFIG_PM
- .suspend = au1200fb_drv_suspend,
- .resume = au1200fb_drv_resume,
-#endif
+ .remove = __devexit_p(au1200fb_drv_remove),
};
/*-------------------------------------------------------------------------*/
/* Kernel driver */
-static void au1200fb_setup(void)
+static int au1200fb_setup(void)
{
- char* options = NULL;
- char* this_opt;
+ char *options = NULL;
+ char *this_opt, *endptr;
int num_panels = ARRAY_SIZE(known_lcd_panels);
int panel_idx = -1;
@@ -1827,70 +1831,42 @@ static void au1200fb_setup(void)
nohwcursor = 1;
}
- /* Unsupported option */
- else {
- print_warn("Unsupported option \"%s\"", this_opt);
+ else if (strncmp(this_opt, "devices:", 8) == 0) {
+ this_opt += 8;
+ device_count = simple_strtol(this_opt,
+ &endptr, 0);
+ if ((device_count < 0) ||
+ (device_count > MAX_DEVICE_COUNT))
+ device_count = MAX_DEVICE_COUNT;
}
- }
- }
-}
-#ifdef CONFIG_PM
-static int au1200fb_pm_callback(au1xxx_power_dev_t *dev,
- au1xxx_request_t request, void *data) {
- int retval = -1;
- unsigned int d = 0;
- unsigned int brightness = 0;
-
- if (request == AU1XXX_PM_SLEEP) {
- board_au1200fb_panel_shutdown();
- }
- else if (request == AU1XXX_PM_WAKEUP) {
- if(dev->prev_state == SLEEP_STATE)
- {
- int plane;
- au1200_setpanel(panel);
- for (plane = 0; plane < CONFIG_FB_AU1200_DEVS; ++plane) {
- struct au1200fb_device *fbdev;
- fbdev = &_au1200fb_devices[plane];
- au1200fb_fb_set_par(&fbdev->fb_info);
+ else if (strncmp(this_opt, "wincfg:", 7) == 0) {
+ this_opt += 7;
+ window_index = simple_strtol(this_opt,
+ &endptr, 0);
+ if ((window_index < 0) ||
+ (window_index >= ARRAY_SIZE(windows)))
+ window_index = DEFAULT_WINDOW_INDEX;
}
- }
- d = *((unsigned int*)data);
- if(d <=10) brightness = 26;
- else if(d<=20) brightness = 51;
- else if(d<=30) brightness = 77;
- else if(d<=40) brightness = 102;
- else if(d<=50) brightness = 128;
- else if(d<=60) brightness = 153;
- else if(d<=70) brightness = 179;
- else if(d<=80) brightness = 204;
- else if(d<=90) brightness = 230;
- else brightness = 255;
- set_brightness(brightness);
- } else if (request == AU1XXX_PM_GETSTATUS) {
- return dev->cur_state;
- } else if (request == AU1XXX_PM_ACCESS) {
- if (dev->cur_state != SLEEP_STATE)
- return retval;
- else {
- au1200_setpanel(panel);
+ else if (strncmp(this_opt, "off", 3) == 0)
+ return 1;
+ /* Unsupported option */
+ else {
+ print_warn("Unsupported option \"%s\"", this_opt);
+ }
}
- } else if (request == AU1XXX_PM_IDLE) {
- } else if (request == AU1XXX_PM_CLEANUP) {
}
-
- return retval;
+ return 0;
}
-#endif
static int __init au1200fb_init(void)
{
print_info("" DRIVER_DESC "");
/* Setup driver with options */
- au1200fb_setup();
+ if (au1200fb_setup())
+ return -ENODEV;
/* Point to the panel selected */
panel = &known_lcd_panels[panel_index];
@@ -1899,17 +1875,6 @@ static int __init au1200fb_init(void)
printk(DRIVER_NAME ": Panel %d %s\n", panel_index, panel->name);
printk(DRIVER_NAME ": Win %d %s\n", window_index, win->name);
- /* Kickstart the panel, the framebuffers/windows come soon enough */
- au1200_setpanel(panel);
-
- #ifdef CONFIG_PM
- LCD_pm_dev = new_au1xxx_power_device("LCD", &au1200fb_pm_callback, NULL);
- if ( LCD_pm_dev == NULL)
- printk(KERN_INFO "Unable to create a power management device entry for the au1200fb.\n");
- else
- printk(KERN_INFO "Power management device entry for the au1200fb loaded.\n");
- #endif
-
return platform_driver_register(&au1200fb_driver);
}
diff --git a/drivers/video/backlight/adp8860_bl.c b/drivers/video/backlight/adp8860_bl.c
index 183b6f639852..66bc74d9ce2a 100644
--- a/drivers/video/backlight/adp8860_bl.c
+++ b/drivers/video/backlight/adp8860_bl.c
@@ -7,7 +7,6 @@
*/
#include <linux/module.h>
-#include <linux/version.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/pm.h>
diff --git a/drivers/video/backlight/adp8870_bl.c b/drivers/video/backlight/adp8870_bl.c
index 05a8832bb3eb..383c4c364b5f 100644
--- a/drivers/video/backlight/adp8870_bl.c
+++ b/drivers/video/backlight/adp8870_bl.c
@@ -7,7 +7,6 @@
*/
#include <linux/module.h>
-#include <linux/version.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/pm.h>
diff --git a/drivers/video/carminefb.c b/drivers/video/carminefb.c
index caaa27d4a46a..cb09aa1fa138 100644
--- a/drivers/video/carminefb.c
+++ b/drivers/video/carminefb.c
@@ -32,11 +32,11 @@
#define CARMINEFB_DEFAULT_VIDEO_MODE 1
static unsigned int fb_mode = CARMINEFB_DEFAULT_VIDEO_MODE;
-module_param(fb_mode, uint, 444);
+module_param(fb_mode, uint, 0444);
MODULE_PARM_DESC(fb_mode, "Initial video mode as integer.");
static char *fb_mode_str;
-module_param(fb_mode_str, charp, 444);
+module_param(fb_mode_str, charp, 0444);
MODULE_PARM_DESC(fb_mode_str, "Initial video mode in characters.");
/*
@@ -46,7 +46,7 @@ MODULE_PARM_DESC(fb_mode_str, "Initial video mode in characters.");
* 0b010 Display 1
*/
static int fb_displays = CARMINE_USE_DISPLAY0 | CARMINE_USE_DISPLAY1;
-module_param(fb_displays, int, 444);
+module_param(fb_displays, int, 0444);
MODULE_PARM_DESC(fb_displays, "Bit mode, which displays are used");
struct carmine_hw {
diff --git a/drivers/video/controlfb.c b/drivers/video/controlfb.c
index 9075bea55879..7b2c40abae15 100644
--- a/drivers/video/controlfb.c
+++ b/drivers/video/controlfb.c
@@ -550,7 +550,7 @@ static void control_set_hardware(struct fb_info_control *p, struct fb_par_contro
/*
- * Parse user speficied options (`video=controlfb:')
+ * Parse user specified options (`video=controlfb:')
*/
static void __init control_setup(char *options)
{
diff --git a/drivers/video/da8xx-fb.c b/drivers/video/da8xx-fb.c
index 8d4e4ebd9977..217c05f74541 100644
--- a/drivers/video/da8xx-fb.c
+++ b/drivers/video/da8xx-fb.c
@@ -35,6 +35,9 @@
#define DRIVER_NAME "da8xx_lcdc"
+#define LCD_VERSION_1 1
+#define LCD_VERSION_2 2
+
/* LCD Status Register */
#define LCD_END_OF_FRAME1 BIT(9)
#define LCD_END_OF_FRAME0 BIT(8)
@@ -49,7 +52,9 @@
#define LCD_DMA_BURST_4 0x2
#define LCD_DMA_BURST_8 0x3
#define LCD_DMA_BURST_16 0x4
-#define LCD_END_OF_FRAME_INT_ENA BIT(2)
+#define LCD_V1_END_OF_FRAME_INT_ENA BIT(2)
+#define LCD_V2_END_OF_FRAME0_INT_ENA BIT(8)
+#define LCD_V2_END_OF_FRAME1_INT_ENA BIT(9)
#define LCD_DUAL_FRAME_BUFFER_ENABLE BIT(0)
/* LCD Control Register */
@@ -65,12 +70,18 @@
#define LCD_MONO_8BIT_MODE BIT(9)
#define LCD_RASTER_ORDER BIT(8)
#define LCD_TFT_MODE BIT(7)
-#define LCD_UNDERFLOW_INT_ENA BIT(6)
-#define LCD_PL_ENABLE BIT(4)
+#define LCD_V1_UNDERFLOW_INT_ENA BIT(6)
+#define LCD_V2_UNDERFLOW_INT_ENA BIT(5)
+#define LCD_V1_PL_INT_ENA BIT(4)
+#define LCD_V2_PL_INT_ENA BIT(6)
#define LCD_MONOCHROME_MODE BIT(1)
#define LCD_RASTER_ENABLE BIT(0)
#define LCD_TFT_ALT_ENABLE BIT(23)
#define LCD_STN_565_ENABLE BIT(24)
+#define LCD_V2_DMA_CLK_EN BIT(2)
+#define LCD_V2_LIDD_CLK_EN BIT(1)
+#define LCD_V2_CORE_CLK_EN BIT(0)
+#define LCD_V2_LPP_B10 26
/* LCD Raster Timing 2 Register */
#define LCD_AC_BIAS_TRANSITIONS_PER_INT(x) ((x) << 16)
@@ -82,6 +93,7 @@
#define LCD_INVERT_FRAME_CLOCK BIT(20)
/* LCD Block */
+#define LCD_PID_REG 0x0
#define LCD_CTRL_REG 0x4
#define LCD_STAT_REG 0x8
#define LCD_RASTER_CTRL_REG 0x28
@@ -94,6 +106,17 @@
#define LCD_DMA_FRM_BUF_BASE_ADDR_1_REG 0x4C
#define LCD_DMA_FRM_BUF_CEILING_ADDR_1_REG 0x50
+/* Interrupt Registers available only in Version 2 */
+#define LCD_RAW_STAT_REG 0x58
+#define LCD_MASKED_STAT_REG 0x5c
+#define LCD_INT_ENABLE_SET_REG 0x60
+#define LCD_INT_ENABLE_CLR_REG 0x64
+#define LCD_END_OF_INT_IND_REG 0x68
+
+/* Clock registers available only on Version 2 */
+#define LCD_CLK_ENABLE_REG 0x6c
+#define LCD_CLK_RESET_REG 0x70
+
#define LCD_NUM_BUFFERS 2
#define WSI_TIMEOUT 50
@@ -105,6 +128,8 @@
static resource_size_t da8xx_fb_reg_base;
static struct resource *lcdc_regs;
+static unsigned int lcd_revision;
+static irq_handler_t lcdc_irq_handler;
static inline unsigned int lcdc_read(unsigned int addr)
{
@@ -240,6 +265,7 @@ static void lcd_blit(int load_mode, struct da8xx_fb_par *par)
u32 end;
u32 reg_ras;
u32 reg_dma;
+ u32 reg_int;
/* init reg to clear PLM (loading mode) fields */
reg_ras = lcdc_read(LCD_RASTER_CTRL_REG);
@@ -252,7 +278,14 @@ static void lcd_blit(int load_mode, struct da8xx_fb_par *par)
end = par->dma_end;
reg_ras |= LCD_PALETTE_LOAD_MODE(DATA_ONLY);
- reg_dma |= LCD_END_OF_FRAME_INT_ENA;
+ if (lcd_revision == LCD_VERSION_1) {
+ reg_dma |= LCD_V1_END_OF_FRAME_INT_ENA;
+ } else {
+ reg_int = lcdc_read(LCD_INT_ENABLE_SET_REG) |
+ LCD_V2_END_OF_FRAME0_INT_ENA |
+ LCD_V2_END_OF_FRAME1_INT_ENA;
+ lcdc_write(reg_int, LCD_INT_ENABLE_SET_REG);
+ }
reg_dma |= LCD_DUAL_FRAME_BUFFER_ENABLE;
lcdc_write(start, LCD_DMA_FRM_BUF_BASE_ADDR_0_REG);
@@ -264,7 +297,14 @@ static void lcd_blit(int load_mode, struct da8xx_fb_par *par)
end = start + par->palette_sz - 1;
reg_ras |= LCD_PALETTE_LOAD_MODE(PALETTE_ONLY);
- reg_ras |= LCD_PL_ENABLE;
+
+ if (lcd_revision == LCD_VERSION_1) {
+ reg_ras |= LCD_V1_PL_INT_ENA;
+ } else {
+ reg_int = lcdc_read(LCD_INT_ENABLE_SET_REG) |
+ LCD_V2_PL_INT_ENA;
+ lcdc_write(reg_int, LCD_INT_ENABLE_SET_REG);
+ }
lcdc_write(start, LCD_DMA_FRM_BUF_BASE_ADDR_0_REG);
lcdc_write(end, LCD_DMA_FRM_BUF_CEILING_ADDR_0_REG);
@@ -348,6 +388,7 @@ static void lcd_cfg_vertical_sync(int back_porch, int pulse_width,
static int lcd_cfg_display(const struct lcd_ctrl_config *cfg)
{
u32 reg;
+ u32 reg_int;
reg = lcdc_read(LCD_RASTER_CTRL_REG) & ~(LCD_TFT_MODE |
LCD_MONO_8BIT_MODE |
@@ -375,7 +416,13 @@ static int lcd_cfg_display(const struct lcd_ctrl_config *cfg)
}
/* enable additional interrupts here */
- reg |= LCD_UNDERFLOW_INT_ENA;
+ if (lcd_revision == LCD_VERSION_1) {
+ reg |= LCD_V1_UNDERFLOW_INT_ENA;
+ } else {
+ reg_int = lcdc_read(LCD_INT_ENABLE_SET_REG) |
+ LCD_V2_UNDERFLOW_INT_ENA;
+ lcdc_write(reg_int, LCD_INT_ENABLE_SET_REG);
+ }
lcdc_write(reg, LCD_RASTER_CTRL_REG);
@@ -511,6 +558,9 @@ static void lcd_reset(struct da8xx_fb_par *par)
/* DMA has to be disabled */
lcdc_write(0, LCD_DMA_CTRL_REG);
lcdc_write(0, LCD_RASTER_CTRL_REG);
+
+ if (lcd_revision == LCD_VERSION_2)
+ lcdc_write(0, LCD_INT_ENABLE_SET_REG);
}
static void lcd_calc_clk_divider(struct da8xx_fb_par *par)
@@ -523,6 +573,11 @@ static void lcd_calc_clk_divider(struct da8xx_fb_par *par)
/* Configure the LCD clock divisor. */
lcdc_write(LCD_CLK_DIVISOR(div) |
(LCD_RASTER_MODE & 0x1), LCD_CTRL_REG);
+
+ if (lcd_revision == LCD_VERSION_2)
+ lcdc_write(LCD_V2_DMA_CLK_EN | LCD_V2_LIDD_CLK_EN |
+ LCD_V2_CORE_CLK_EN, LCD_CLK_ENABLE_REG);
+
}
static int lcd_init(struct da8xx_fb_par *par, const struct lcd_ctrl_config *cfg,
@@ -583,7 +638,63 @@ static int lcd_init(struct da8xx_fb_par *par, const struct lcd_ctrl_config *cfg,
return 0;
}
-static irqreturn_t lcdc_irq_handler(int irq, void *arg)
+/* IRQ handler for version 2 of LCDC */
+static irqreturn_t lcdc_irq_handler_rev02(int irq, void *arg)
+{
+ struct da8xx_fb_par *par = arg;
+ u32 stat = lcdc_read(LCD_MASKED_STAT_REG);
+ u32 reg_int;
+
+ if ((stat & LCD_SYNC_LOST) && (stat & LCD_FIFO_UNDERFLOW)) {
+ lcd_disable_raster();
+ lcdc_write(stat, LCD_MASKED_STAT_REG);
+ lcd_enable_raster();
+ } else if (stat & LCD_PL_LOAD_DONE) {
+ /*
+ * Must disable raster before changing state of any control bit.
+ * And also must be disabled before clearing the PL loading
+ * interrupt via the following write to the status register. If
+ * this is done after then one gets multiple PL done interrupts.
+ */
+ lcd_disable_raster();
+
+ lcdc_write(stat, LCD_MASKED_STAT_REG);
+
+ /* Disable PL completion inerrupt */
+ reg_int = lcdc_read(LCD_INT_ENABLE_CLR_REG) |
+ (LCD_V2_PL_INT_ENA);
+ lcdc_write(reg_int, LCD_INT_ENABLE_CLR_REG);
+
+ /* Setup and start data loading mode */
+ lcd_blit(LOAD_DATA, par);
+ } else {
+ lcdc_write(stat, LCD_MASKED_STAT_REG);
+
+ if (stat & LCD_END_OF_FRAME0) {
+ lcdc_write(par->dma_start,
+ LCD_DMA_FRM_BUF_BASE_ADDR_0_REG);
+ lcdc_write(par->dma_end,
+ LCD_DMA_FRM_BUF_CEILING_ADDR_0_REG);
+ par->vsync_flag = 1;
+ wake_up_interruptible(&par->vsync_wait);
+ }
+
+ if (stat & LCD_END_OF_FRAME1) {
+ lcdc_write(par->dma_start,
+ LCD_DMA_FRM_BUF_BASE_ADDR_1_REG);
+ lcdc_write(par->dma_end,
+ LCD_DMA_FRM_BUF_CEILING_ADDR_1_REG);
+ par->vsync_flag = 1;
+ wake_up_interruptible(&par->vsync_wait);
+ }
+ }
+
+ lcdc_write(0, LCD_END_OF_INT_IND_REG);
+ return IRQ_HANDLED;
+}
+
+/* IRQ handler for version 1 LCDC */
+static irqreturn_t lcdc_irq_handler_rev01(int irq, void *arg)
{
struct da8xx_fb_par *par = arg;
u32 stat = lcdc_read(LCD_STAT_REG);
@@ -606,7 +717,7 @@ static irqreturn_t lcdc_irq_handler(int irq, void *arg)
/* Disable PL completion inerrupt */
reg_ras = lcdc_read(LCD_RASTER_CTRL_REG);
- reg_ras &= ~LCD_PL_ENABLE;
+ reg_ras &= ~LCD_V1_PL_INT_ENA;
lcdc_write(reg_ras, LCD_RASTER_CTRL_REG);
/* Setup and start data loading mode */
@@ -945,6 +1056,22 @@ static int __devinit fb_probe(struct platform_device *device)
if (ret)
goto err_clk_put;
+ /* Determine LCD IP Version */
+ switch (lcdc_read(LCD_PID_REG)) {
+ case 0x4C100102:
+ lcd_revision = LCD_VERSION_1;
+ break;
+ case 0x4F200800:
+ lcd_revision = LCD_VERSION_2;
+ break;
+ default:
+ dev_warn(&device->dev, "Unknown PID Reg value 0x%x, "
+ "defaulting to LCD revision 1\n",
+ lcdc_read(LCD_PID_REG));
+ lcd_revision = LCD_VERSION_1;
+ break;
+ }
+
for (i = 0, lcdc_info = known_lcd_panels;
i < ARRAY_SIZE(known_lcd_panels);
i++, lcdc_info++) {
@@ -1085,7 +1212,13 @@ static int __devinit fb_probe(struct platform_device *device)
}
#endif
- ret = request_irq(par->irq, lcdc_irq_handler, 0, DRIVER_NAME, par);
+ if (lcd_revision == LCD_VERSION_1)
+ lcdc_irq_handler = lcdc_irq_handler_rev01;
+ else
+ lcdc_irq_handler = lcdc_irq_handler_rev02;
+
+ ret = request_irq(par->irq, lcdc_irq_handler, 0,
+ DRIVER_NAME, par);
if (ret)
goto irq_freq;
return 0;
diff --git a/drivers/video/fb_defio.c b/drivers/video/fb_defio.c
index 32814e8800e0..c27e153d8882 100644
--- a/drivers/video/fb_defio.c
+++ b/drivers/video/fb_defio.c
@@ -223,8 +223,7 @@ void fb_deferred_io_cleanup(struct fb_info *info)
int i;
BUG_ON(!fbdefio);
- cancel_delayed_work(&info->deferred_work);
- flush_scheduled_work();
+ cancel_delayed_work_sync(&info->deferred_work);
/* clear out the mapping that we setup */
for (i = 0 ; i < info->fix.smem_len; i += PAGE_SIZE) {
diff --git a/drivers/video/fsl-diu-fb.c b/drivers/video/fsl-diu-fb.c
index 0acc7d65aeaa..0f1933b54596 100644
--- a/drivers/video/fsl-diu-fb.c
+++ b/drivers/video/fsl-diu-fb.c
@@ -31,8 +31,6 @@
#include <linux/uaccess.h>
#include <linux/vmalloc.h>
-#include <linux/of_platform.h>
-
#include <sysdev/fsl_soc.h>
#include <linux/fsl-diu-fb.h>
#include "edid.h"
@@ -183,7 +181,8 @@ static struct fb_videomode __devinitdata fsl_diu_mode_db[] = {
static char *fb_mode = "1024x768-32@60";
static unsigned long default_bpp = 32;
-static int monitor_port;
+static enum fsl_diu_monitor_port monitor_port;
+static char *monitor_string;
#if defined(CONFIG_NOT_COHERENT_CACHE)
static u8 *coherence_data;
@@ -201,7 +200,7 @@ struct fsl_diu_data {
void *dummy_aoi_virt;
unsigned int irq;
int fb_enabled;
- int monitor_port;
+ enum fsl_diu_monitor_port monitor_port;
};
struct mfb_info {
@@ -282,6 +281,37 @@ static struct diu_hw dr = {
static struct diu_pool pool;
/**
+ * fsl_diu_name_to_port - convert a port name to a monitor port enum
+ *
+ * Takes the name of a monitor port ("dvi", "lvds", or "dlvds") and returns
+ * the enum fsl_diu_monitor_port that corresponds to that string.
+ *
+ * For compatibility with older versions, a number ("0", "1", or "2") is also
+ * supported.
+ *
+ * If the string is unknown, DVI is assumed.
+ *
+ * If the particular port is not supported by the platform, another port
+ * (platform-specific) is chosen instead.
+ */
+static enum fsl_diu_monitor_port fsl_diu_name_to_port(const char *s)
+{
+ enum fsl_diu_monitor_port port = FSL_DIU_PORT_DVI;
+ unsigned long val;
+
+ if (s) {
+ if (!strict_strtoul(s, 10, &val) && (val <= 2))
+ port = (enum fsl_diu_monitor_port) val;
+ else if (strncmp(s, "lvds", 4) == 0)
+ port = FSL_DIU_PORT_LVDS;
+ else if (strncmp(s, "dlvds", 5) == 0)
+ port = FSL_DIU_PORT_DLVDS;
+ }
+
+ return diu_ops.valid_monitor_port(port);
+}
+
+/**
* fsl_diu_alloc - allocate memory for the DIU
* @size: number of bytes to allocate
* @param: returned physical address of memory
@@ -831,9 +861,8 @@ static int fsl_diu_set_par(struct fb_info *info)
}
}
- ad->pix_fmt =
- diu_ops.get_pixel_format(var->bits_per_pixel,
- machine_data->monitor_port);
+ ad->pix_fmt = diu_ops.get_pixel_format(machine_data->monitor_port,
+ var->bits_per_pixel);
ad->addr = cpu_to_le32(info->fix.smem_start);
ad->src_size_g_alpha = cpu_to_le32((var->yres_virtual << 12) |
var->xres_virtual) | mfbi->g_alpha;
@@ -1439,16 +1468,12 @@ static void free_buf(struct device *dev, struct diu_addr *buf, u32 size,
static ssize_t store_monitor(struct device *device,
struct device_attribute *attr, const char *buf, size_t count)
{
- int old_monitor_port;
- unsigned long val;
+ enum fsl_diu_monitor_port old_monitor_port;
struct fsl_diu_data *machine_data =
container_of(attr, struct fsl_diu_data, dev_attr);
- if (strict_strtoul(buf, 10, &val))
- return 0;
-
old_monitor_port = machine_data->monitor_port;
- machine_data->monitor_port = diu_ops.set_sysfs_monitor_port(val);
+ machine_data->monitor_port = fsl_diu_name_to_port(buf);
if (old_monitor_port != machine_data->monitor_port) {
/* All AOIs need adjust pixel format
@@ -1468,7 +1493,17 @@ static ssize_t show_monitor(struct device *device,
{
struct fsl_diu_data *machine_data =
container_of(attr, struct fsl_diu_data, dev_attr);
- return diu_ops.show_monitor_port(machine_data->monitor_port, buf);
+
+ switch (machine_data->monitor_port) {
+ case FSL_DIU_PORT_DVI:
+ return sprintf(buf, "DVI\n");
+ case FSL_DIU_PORT_LVDS:
+ return sprintf(buf, "Single-link LVDS\n");
+ case FSL_DIU_PORT_DLVDS:
+ return sprintf(buf, "Dual-link LVDS\n");
+ }
+
+ return 0;
}
static int __devinit fsl_diu_probe(struct platform_device *ofdev)
@@ -1692,8 +1727,7 @@ static int __init fsl_diu_setup(char *options)
if (!*opt)
continue;
if (!strncmp(opt, "monitor=", 8)) {
- if (!strict_strtoul(opt + 8, 10, &val) && (val <= 2))
- monitor_port = val;
+ monitor_port = fsl_diu_name_to_port(opt + 8);
} else if (!strncmp(opt, "bpp=", 4)) {
if (!strict_strtoul(opt + 4, 10, &val))
default_bpp = val;
@@ -1746,6 +1780,8 @@ static int __init fsl_diu_init(void)
if (fb_get_options("fslfb", &option))
return -ENODEV;
fsl_diu_setup(option);
+#else
+ monitor_port = fsl_diu_name_to_port(monitor_string);
#endif
printk(KERN_INFO "Freescale DIU driver\n");
@@ -1812,7 +1848,7 @@ MODULE_PARM_DESC(mode,
"Specify resolution as \"<xres>x<yres>[-<bpp>][@<refresh>]\" ");
module_param_named(bpp, default_bpp, ulong, 0);
MODULE_PARM_DESC(bpp, "Specify bit-per-pixel if not specified mode");
-module_param_named(monitor, monitor_port, int, 0);
-MODULE_PARM_DESC(monitor,
- "Specify the monitor port (0, 1 or 2) if supported by the platform");
+module_param_named(monitor, monitor_string, charp, 0);
+MODULE_PARM_DESC(monitor, "Specify the monitor port "
+ "(\"dvi\", \"lvds\", or \"dlvds\") if supported by the platform");
diff --git a/drivers/video/grvga.c b/drivers/video/grvga.c
new file mode 100644
index 000000000000..f37e02538203
--- /dev/null
+++ b/drivers/video/grvga.c
@@ -0,0 +1,579 @@
+/*
+ * Driver for Aeroflex Gaisler SVGACTRL framebuffer device.
+ *
+ * 2011 (c) Aeroflex Gaisler AB
+ *
+ * Full documentation of the core can be found here:
+ * http://www.gaisler.com/products/grlib/grip.pdf
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * Contributors: Kristoffer Glembo <kristoffer@gaisler.com>
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/of_platform.h>
+#include <linux/of_device.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/tty.h>
+#include <linux/mm.h>
+#include <linux/fb.h>
+#include <linux/io.h>
+
+struct grvga_regs {
+ u32 status; /* 0x00 */
+ u32 video_length; /* 0x04 */
+ u32 front_porch; /* 0x08 */
+ u32 sync_length; /* 0x0C */
+ u32 line_length; /* 0x10 */
+ u32 fb_pos; /* 0x14 */
+ u32 clk_vector[4]; /* 0x18 */
+ u32 clut; /* 0x20 */
+};
+
+struct grvga_par {
+ struct grvga_regs *regs;
+ u32 color_palette[16]; /* 16 entry pseudo palette used by fbcon in true color mode */
+ int clk_sel;
+ int fb_alloced; /* = 1 if framebuffer is allocated in main memory */
+};
+
+
+static const struct fb_videomode grvga_modedb[] = {
+ {
+ /* 640x480 @ 60 Hz */
+ NULL, 60, 640, 480, 40000, 48, 16, 39, 11, 96, 2,
+ 0, FB_VMODE_NONINTERLACED
+ }, {
+ /* 800x600 @ 60 Hz */
+ NULL, 60, 800, 600, 25000, 88, 40, 23, 1, 128, 4,
+ 0, FB_VMODE_NONINTERLACED
+ }, {
+ /* 800x600 @ 72 Hz */
+ NULL, 72, 800, 600, 20000, 64, 56, 23, 37, 120, 6,
+ 0, FB_VMODE_NONINTERLACED
+ }, {
+ /* 1024x768 @ 60 Hz */
+ NULL, 60, 1024, 768, 15385, 160, 24, 29, 3, 136, 6,
+ 0, FB_VMODE_NONINTERLACED
+ }
+ };
+
+static struct fb_fix_screeninfo grvga_fix __initdata = {
+ .id = "AG SVGACTRL",
+ .type = FB_TYPE_PACKED_PIXELS,
+ .visual = FB_VISUAL_PSEUDOCOLOR,
+ .xpanstep = 0,
+ .ypanstep = 1,
+ .ywrapstep = 0,
+ .accel = FB_ACCEL_NONE,
+};
+
+static int grvga_check_var(struct fb_var_screeninfo *var,
+ struct fb_info *info)
+{
+ struct grvga_par *par = info->par;
+ int i;
+
+ if (!var->xres)
+ var->xres = 1;
+ if (!var->yres)
+ var->yres = 1;
+ if (var->bits_per_pixel <= 8)
+ var->bits_per_pixel = 8;
+ else if (var->bits_per_pixel <= 16)
+ var->bits_per_pixel = 16;
+ else if (var->bits_per_pixel <= 24)
+ var->bits_per_pixel = 24;
+ else if (var->bits_per_pixel <= 32)
+ var->bits_per_pixel = 32;
+ else
+ return -EINVAL;
+
+ var->xres_virtual = var->xres;
+ var->yres_virtual = 2*var->yres;
+
+ if (info->fix.smem_len) {
+ if ((var->yres_virtual*var->xres_virtual*var->bits_per_pixel/8) > info->fix.smem_len)
+ return -ENOMEM;
+ }
+
+ /* Which clocks that are available can be read out in these registers */
+ for (i = 0; i <= 3 ; i++) {
+ if (var->pixclock == par->regs->clk_vector[i])
+ break;
+ }
+ if (i <= 3)
+ par->clk_sel = i;
+ else
+ return -EINVAL;
+
+ switch (info->var.bits_per_pixel) {
+ case 8:
+ var->red = (struct fb_bitfield) {0, 8, 0}; /* offset, length, msb-right */
+ var->green = (struct fb_bitfield) {0, 8, 0};
+ var->blue = (struct fb_bitfield) {0, 8, 0};
+ var->transp = (struct fb_bitfield) {0, 0, 0};
+ break;
+ case 16:
+ var->red = (struct fb_bitfield) {11, 5, 0};
+ var->green = (struct fb_bitfield) {5, 6, 0};
+ var->blue = (struct fb_bitfield) {0, 5, 0};
+ var->transp = (struct fb_bitfield) {0, 0, 0};
+ break;
+ case 24:
+ case 32:
+ var->red = (struct fb_bitfield) {16, 8, 0};
+ var->green = (struct fb_bitfield) {8, 8, 0};
+ var->blue = (struct fb_bitfield) {0, 8, 0};
+ var->transp = (struct fb_bitfield) {24, 8, 0};
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int grvga_set_par(struct fb_info *info)
+{
+
+ u32 func = 0;
+ struct grvga_par *par = info->par;
+
+ __raw_writel(((info->var.yres - 1) << 16) | (info->var.xres - 1),
+ &par->regs->video_length);
+
+ __raw_writel((info->var.lower_margin << 16) | (info->var.right_margin),
+ &par->regs->front_porch);
+
+ __raw_writel((info->var.vsync_len << 16) | (info->var.hsync_len),
+ &par->regs->sync_length);
+
+ __raw_writel(((info->var.yres + info->var.lower_margin + info->var.upper_margin + info->var.vsync_len - 1) << 16) |
+ (info->var.xres + info->var.right_margin + info->var.left_margin + info->var.hsync_len - 1),
+ &par->regs->line_length);
+
+ switch (info->var.bits_per_pixel) {
+ case 8:
+ info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
+ func = 1;
+ break;
+ case 16:
+ info->fix.visual = FB_VISUAL_TRUECOLOR;
+ func = 2;
+ break;
+ case 24:
+ case 32:
+ info->fix.visual = FB_VISUAL_TRUECOLOR;
+ func = 3;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ __raw_writel((par->clk_sel << 6) | (func << 4) | 1,
+ &par->regs->status);
+
+ info->fix.line_length = (info->var.xres_virtual*info->var.bits_per_pixel)/8;
+ return 0;
+}
+
+static int grvga_setcolreg(unsigned regno, unsigned red, unsigned green, unsigned blue, unsigned transp, struct fb_info *info)
+{
+ struct grvga_par *par;
+ par = info->par;
+
+ if (regno >= 256) /* Size of CLUT */
+ return -EINVAL;
+
+ if (info->var.grayscale) {
+ /* grayscale = 0.30*R + 0.59*G + 0.11*B */
+ red = green = blue = (red * 77 + green * 151 + blue * 28) >> 8;
+ }
+
+
+
+#define CNVT_TOHW(val, width) ((((val)<<(width))+0x7FFF-(val))>>16)
+
+ red = CNVT_TOHW(red, info->var.red.length);
+ green = CNVT_TOHW(green, info->var.green.length);
+ blue = CNVT_TOHW(blue, info->var.blue.length);
+ transp = CNVT_TOHW(transp, info->var.transp.length);
+
+#undef CNVT_TOHW
+
+ /* In PSEUDOCOLOR we use the hardware CLUT */
+ if (info->fix.visual == FB_VISUAL_PSEUDOCOLOR)
+ __raw_writel((regno << 24) | (red << 16) | (green << 8) | blue,
+ &par->regs->clut);
+
+ /* Truecolor uses the pseudo palette */
+ else if (info->fix.visual == FB_VISUAL_TRUECOLOR) {
+ u32 v;
+ if (regno >= 16)
+ return -EINVAL;
+
+
+ v = (red << info->var.red.offset) |
+ (green << info->var.green.offset) |
+ (blue << info->var.blue.offset) |
+ (transp << info->var.transp.offset);
+
+ ((u32 *) (info->pseudo_palette))[regno] = v;
+ }
+ return 0;
+}
+
+static int grvga_pan_display(struct fb_var_screeninfo *var,
+ struct fb_info *info)
+{
+ struct grvga_par *par = info->par;
+ struct fb_fix_screeninfo *fix = &info->fix;
+ u32 base_addr;
+
+ if (var->xoffset != 0)
+ return -EINVAL;
+
+ base_addr = fix->smem_start + (var->yoffset * fix->line_length);
+ base_addr &= ~3UL;
+
+ /* Set framebuffer base address */
+ __raw_writel(base_addr,
+ &par->regs->fb_pos);
+
+ return 0;
+}
+
+static struct fb_ops grvga_ops = {
+ .owner = THIS_MODULE,
+ .fb_check_var = grvga_check_var,
+ .fb_set_par = grvga_set_par,
+ .fb_setcolreg = grvga_setcolreg,
+ .fb_pan_display = grvga_pan_display,
+ .fb_fillrect = cfb_fillrect,
+ .fb_copyarea = cfb_copyarea,
+ .fb_imageblit = cfb_imageblit
+};
+
+static int __init grvga_parse_custom(char *options,
+ struct fb_var_screeninfo *screendata)
+{
+ char *this_opt;
+ int count = 0;
+ if (!options || !*options)
+ return -1;
+
+ while ((this_opt = strsep(&options, " ")) != NULL) {
+ if (!*this_opt)
+ continue;
+
+ switch (count) {
+ case 0:
+ screendata->pixclock = simple_strtoul(this_opt, NULL, 0);
+ count++;
+ break;
+ case 1:
+ screendata->xres = screendata->xres_virtual = simple_strtoul(this_opt, NULL, 0);
+ count++;
+ break;
+ case 2:
+ screendata->right_margin = simple_strtoul(this_opt, NULL, 0);
+ count++;
+ break;
+ case 3:
+ screendata->hsync_len = simple_strtoul(this_opt, NULL, 0);
+ count++;
+ break;
+ case 4:
+ screendata->left_margin = simple_strtoul(this_opt, NULL, 0);
+ count++;
+ break;
+ case 5:
+ screendata->yres = screendata->yres_virtual = simple_strtoul(this_opt, NULL, 0);
+ count++;
+ break;
+ case 6:
+ screendata->lower_margin = simple_strtoul(this_opt, NULL, 0);
+ count++;
+ break;
+ case 7:
+ screendata->vsync_len = simple_strtoul(this_opt, NULL, 0);
+ count++;
+ break;
+ case 8:
+ screendata->upper_margin = simple_strtoul(this_opt, NULL, 0);
+ count++;
+ break;
+ case 9:
+ screendata->bits_per_pixel = simple_strtoul(this_opt, NULL, 0);
+ count++;
+ break;
+ default:
+ return -1;
+ }
+ }
+ screendata->activate = FB_ACTIVATE_NOW;
+ screendata->vmode = FB_VMODE_NONINTERLACED;
+ return 0;
+}
+
+static int __devinit grvga_probe(struct platform_device *dev)
+{
+ struct fb_info *info;
+ int retval = -ENOMEM;
+ unsigned long virtual_start;
+ unsigned long grvga_fix_addr = 0;
+ unsigned long physical_start = 0;
+ unsigned long grvga_mem_size = 0;
+ struct grvga_par *par = NULL;
+ char *options = NULL, *mode_opt = NULL;
+
+ info = framebuffer_alloc(sizeof(struct grvga_par), &dev->dev);
+ if (!info) {
+ dev_err(&dev->dev, "framebuffer_alloc failed\n");
+ return -ENOMEM;
+ }
+
+ /* Expecting: "grvga: modestring, [addr:<framebuffer physical address>], [size:<framebuffer size>]
+ *
+ * If modestring is custom:<custom mode string> we parse the string which then contains all videoparameters
+ * If address is left out, we allocate memory,
+ * if size is left out we only allocate enough to support the given mode.
+ */
+ if (fb_get_options("grvga", &options)) {
+ retval = -ENODEV;
+ goto err;
+ }
+
+ if (!options || !*options)
+ options = "640x480-8@60";
+
+ while (1) {
+ char *this_opt = strsep(&options, ",");
+
+ if (!this_opt)
+ break;
+
+ if (!strncmp(this_opt, "custom", 6)) {
+ if (grvga_parse_custom(this_opt, &info->var) < 0) {
+ dev_err(&dev->dev, "Failed to parse custom mode (%s).\n", this_opt);
+ retval = -EINVAL;
+ goto err1;
+ }
+ } else if (!strncmp(this_opt, "addr", 4))
+ grvga_fix_addr = simple_strtoul(this_opt + 5, NULL, 16);
+ else if (!strncmp(this_opt, "size", 4))
+ grvga_mem_size = simple_strtoul(this_opt + 5, NULL, 0);
+ else
+ mode_opt = this_opt;
+ }
+
+ par = info->par;
+ info->fbops = &grvga_ops;
+ info->fix = grvga_fix;
+ info->pseudo_palette = par->color_palette;
+ info->flags = FBINFO_DEFAULT | FBINFO_PARTIAL_PAN_OK | FBINFO_HWACCEL_YPAN;
+ info->fix.smem_len = grvga_mem_size;
+
+ if (!request_mem_region(dev->resource[0].start, resource_size(&dev->resource[0]), "grlib-svgactrl regs")) {
+ dev_err(&dev->dev, "registers already mapped\n");
+ retval = -EBUSY;
+ goto err;
+ }
+
+ par->regs = of_ioremap(&dev->resource[0], 0,
+ resource_size(&dev->resource[0]),
+ "grlib-svgactrl regs");
+
+ if (!par->regs) {
+ dev_err(&dev->dev, "failed to map registers\n");
+ retval = -ENOMEM;
+ goto err1;
+ }
+
+ retval = fb_alloc_cmap(&info->cmap, 256, 0);
+ if (retval < 0) {
+ dev_err(&dev->dev, "failed to allocate mem with fb_alloc_cmap\n");
+ retval = -ENOMEM;
+ goto err2;
+ }
+
+ if (mode_opt) {
+ retval = fb_find_mode(&info->var, info, mode_opt,
+ grvga_modedb, sizeof(grvga_modedb), &grvga_modedb[0], 8);
+ if (!retval || retval == 4) {
+ retval = -EINVAL;
+ goto err3;
+ }
+ }
+
+ if (!grvga_mem_size)
+ grvga_mem_size = info->var.xres_virtual * info->var.yres_virtual * info->var.bits_per_pixel/8;
+
+ if (grvga_fix_addr) {
+ /* Got framebuffer base address from argument list */
+
+ physical_start = grvga_fix_addr;
+
+ if (!request_mem_region(physical_start, grvga_mem_size, dev->name)) {
+ dev_err(&dev->dev, "failed to request memory region\n");
+ retval = -ENOMEM;
+ goto err3;
+ }
+
+ virtual_start = (unsigned long) ioremap(physical_start, grvga_mem_size);
+
+ if (!virtual_start) {
+ dev_err(&dev->dev, "error mapping framebuffer memory\n");
+ retval = -ENOMEM;
+ goto err4;
+ }
+ } else { /* Allocate frambuffer memory */
+
+ unsigned long page;
+
+ virtual_start = (unsigned long) __get_free_pages(GFP_DMA,
+ get_order(grvga_mem_size));
+ if (!virtual_start) {
+ dev_err(&dev->dev,
+ "unable to allocate framebuffer memory (%lu bytes)\n",
+ grvga_mem_size);
+ retval = -ENOMEM;
+ goto err3;
+ }
+
+ physical_start = dma_map_single(&dev->dev, (void *)virtual_start, grvga_mem_size, DMA_TO_DEVICE);
+
+ /* Set page reserved so that mmap will work. This is necessary
+ * since we'll be remapping normal memory.
+ */
+ for (page = virtual_start;
+ page < PAGE_ALIGN(virtual_start + grvga_mem_size);
+ page += PAGE_SIZE) {
+ SetPageReserved(virt_to_page(page));
+ }
+
+ par->fb_alloced = 1;
+ }
+
+ memset((unsigned long *) virtual_start, 0, grvga_mem_size);
+
+ info->screen_base = (char __iomem *) virtual_start;
+ info->fix.smem_start = physical_start;
+ info->fix.smem_len = grvga_mem_size;
+
+ dev_set_drvdata(&dev->dev, info);
+
+ dev_info(&dev->dev,
+ "Aeroflex Gaisler framebuffer device (fb%d), %dx%d-%d, using %luK of video memory @ %p\n",
+ info->node, info->var.xres, info->var.yres, info->var.bits_per_pixel,
+ grvga_mem_size >> 10, info->screen_base);
+
+ retval = register_framebuffer(info);
+ if (retval < 0) {
+ dev_err(&dev->dev, "failed to register framebuffer\n");
+ goto err4;
+ }
+
+ __raw_writel(physical_start, &par->regs->fb_pos);
+ __raw_writel(__raw_readl(&par->regs->status) | 1, /* Enable framebuffer */
+ &par->regs->status);
+
+ return 0;
+
+err4:
+ dev_set_drvdata(&dev->dev, NULL);
+ if (grvga_fix_addr) {
+ release_mem_region(physical_start, grvga_mem_size);
+ iounmap((void *)virtual_start);
+ } else
+ kfree((void *)virtual_start);
+err3:
+ fb_dealloc_cmap(&info->cmap);
+err2:
+ of_iounmap(&dev->resource[0], par->regs,
+ resource_size(&dev->resource[0]));
+err1:
+ release_mem_region(dev->resource[0].start, resource_size(&dev->resource[0]));
+err:
+ framebuffer_release(info);
+
+ return retval;
+}
+
+static int __devexit grvga_remove(struct platform_device *device)
+{
+ struct fb_info *info = dev_get_drvdata(&device->dev);
+ struct grvga_par *par = info->par;
+
+ if (info) {
+ unregister_framebuffer(info);
+ fb_dealloc_cmap(&info->cmap);
+
+ of_iounmap(&device->resource[0], par->regs,
+ resource_size(&device->resource[0]));
+ release_mem_region(device->resource[0].start, resource_size(&device->resource[0]));
+
+ if (!par->fb_alloced) {
+ release_mem_region(info->fix.smem_start, info->fix.smem_len);
+ iounmap(info->screen_base);
+ } else
+ kfree((void *)info->screen_base);
+
+ framebuffer_release(info);
+ dev_set_drvdata(&device->dev, NULL);
+ }
+
+ return 0;
+}
+
+static struct of_device_id svgactrl_of_match[] = {
+ {
+ .name = "GAISLER_SVGACTRL",
+ },
+ {
+ .name = "01_063",
+ },
+ {},
+};
+MODULE_DEVICE_TABLE(of, svgactrl_of_match);
+
+static struct platform_driver grvga_driver = {
+ .driver = {
+ .name = "grlib-svgactrl",
+ .owner = THIS_MODULE,
+ .of_match_table = svgactrl_of_match,
+ },
+ .probe = grvga_probe,
+ .remove = __devexit_p(grvga_remove),
+};
+
+
+static int __init grvga_init(void)
+{
+ return platform_driver_register(&grvga_driver);
+}
+
+static void __exit grvga_exit(void)
+{
+ platform_driver_unregister(&grvga_driver);
+}
+
+module_init(grvga_init);
+module_exit(grvga_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Aeroflex Gaisler");
+MODULE_DESCRIPTION("Aeroflex Gaisler framebuffer device driver");
diff --git a/drivers/video/msm/mdp.c b/drivers/video/msm/mdp.c
index 243d16f09b8a..01fa660764b4 100644
--- a/drivers/video/msm/mdp.c
+++ b/drivers/video/msm/mdp.c
@@ -421,7 +421,8 @@ int mdp_probe(struct platform_device *pdev)
clk = clk_get(&pdev->dev, "mdp_clk");
if (IS_ERR(clk)) {
printk(KERN_INFO "mdp: failed to get mdp clk");
- return PTR_ERR(clk);
+ ret = PTR_ERR(clk);
+ goto error_get_clk;
}
ret = request_irq(mdp->irq, mdp_isr, IRQF_DISABLED, "msm_mdp", mdp);
@@ -495,6 +496,7 @@ int mdp_probe(struct platform_device *pdev)
error_device_register:
free_irq(mdp->irq, mdp);
error_request_irq:
+error_get_clk:
iounmap(mdp->base);
error_get_irq:
error_ioremap:
diff --git a/drivers/video/platinumfb.c b/drivers/video/platinumfb.c
index f27ae16ead2e..66949232f85c 100644
--- a/drivers/video/platinumfb.c
+++ b/drivers/video/platinumfb.c
@@ -490,7 +490,7 @@ static int platinum_var_to_par(struct fb_var_screeninfo *var,
/*
- * Parse user speficied options (`video=platinumfb:')
+ * Parse user specified options (`video=platinumfb:')
*/
static int __init platinumfb_setup(char *options)
{
diff --git a/drivers/video/pm2fb.c b/drivers/video/pm2fb.c
index f4f8ce802d02..dc7bfa91e57a 100644
--- a/drivers/video/pm2fb.c
+++ b/drivers/video/pm2fb.c
@@ -1773,7 +1773,7 @@ MODULE_DEVICE_TABLE(pci, pm2fb_id_table);
#ifndef MODULE
/**
- * Parse user speficied options.
+ * Parse user specified options.
*
* This is, comma-separated options following `video=pm2fb:'.
*/
diff --git a/drivers/video/pm3fb.c b/drivers/video/pm3fb.c
index 8221b5b42da9..6632ee5ecb7e 100644
--- a/drivers/video/pm3fb.c
+++ b/drivers/video/pm3fb.c
@@ -1525,7 +1525,7 @@ static int __init pm3fb_setup(char *options)
{
char *this_opt;
- /* Parse user speficied options (`video=pm3fb:') */
+ /* Parse user specified options (`video=pm3fb:') */
if (!options || !*options)
return 0;
diff --git a/drivers/video/pxa3xx-gcu.c b/drivers/video/pxa3xx-gcu.c
index 0283c7021090..d8de5577d3cf 100644
--- a/drivers/video/pxa3xx-gcu.c
+++ b/drivers/video/pxa3xx-gcu.c
@@ -31,8 +31,6 @@
*/
#include <linux/module.h>
-#include <linux/version.h>
-
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/miscdevice.h>
diff --git a/drivers/video/s3c2410fb.c b/drivers/video/s3c2410fb.c
index 0aa13761de6e..798144a4eedd 100644
--- a/drivers/video/s3c2410fb.c
+++ b/drivers/video/s3c2410fb.c
@@ -767,7 +767,6 @@ static irqreturn_t s3c2410fb_irq(int irq, void *dev_id)
static int s3c2410fb_cpufreq_transition(struct notifier_block *nb,
unsigned long val, void *data)
{
- struct cpufreq_freqs *freqs = data;
struct s3c2410fb_info *info;
struct fb_info *fbinfo;
long delta_f;
diff --git a/drivers/video/s3fb.c b/drivers/video/s3fb.c
index 0f9af1aa5077..946a949f4c7d 100644
--- a/drivers/video/s3fb.c
+++ b/drivers/video/s3fb.c
@@ -1505,7 +1505,7 @@ static struct pci_driver s3fb_pci_driver = {
.resume = s3_pci_resume,
};
-/* Parse user speficied options */
+/* Parse user specified options */
#ifndef MODULE
static int __init s3fb_setup(char *options)
diff --git a/drivers/video/skeletonfb.c b/drivers/video/skeletonfb.c
index 89158bc71da2..30f7a815a62b 100644
--- a/drivers/video/skeletonfb.c
+++ b/drivers/video/skeletonfb.c
@@ -989,7 +989,7 @@ static struct platform_device *xxxfb_device;
*/
int __init xxxfb_setup(char *options)
{
- /* Parse user speficied options (`video=xxxfb:') */
+ /* Parse user specified options (`video=xxxfb:') */
}
#endif /* MODULE */
diff --git a/drivers/video/udlfb.c b/drivers/video/udlfb.c
index 101846c2084a..3473e75ce785 100644
--- a/drivers/video/udlfb.c
+++ b/drivers/video/udlfb.c
@@ -48,13 +48,22 @@ static const u32 udlfb_info_flags = FBINFO_DEFAULT | FBINFO_READS_FAST |
FBINFO_HWACCEL_COPYAREA | FBINFO_MISC_ALWAYS_SETPAR;
/*
- * There are many DisplayLink-based products, all with unique PIDs. We are able
- * to support all volume ones (circa 2009) with a single driver, so we match
- * globally on VID. TODO: Probe() needs to detect when we might be running
- * "future" chips, and bail on those, so a compatible driver can match.
+ * There are many DisplayLink-based graphics products, all with unique PIDs.
+ * So we match on DisplayLink's VID + Vendor-Defined Interface Class (0xff)
+ * We also require a match on SubClass (0x00) and Protocol (0x00),
+ * which is compatible with all known USB 2.0 era graphics chips and firmware,
+ * but allows DisplayLink to increment those for any future incompatible chips
*/
static struct usb_device_id id_table[] = {
- {.idVendor = 0x17e9, .match_flags = USB_DEVICE_ID_MATCH_VENDOR,},
+ {.idVendor = 0x17e9,
+ .bInterfaceClass = 0xff,
+ .bInterfaceSubClass = 0x00,
+ .bInterfaceProtocol = 0x00,
+ .match_flags = USB_DEVICE_ID_MATCH_VENDOR |
+ USB_DEVICE_ID_MATCH_INT_CLASS |
+ USB_DEVICE_ID_MATCH_INT_SUBCLASS |
+ USB_DEVICE_ID_MATCH_INT_PROTOCOL,
+ },
{},
};
MODULE_DEVICE_TABLE(usb, id_table);
@@ -1613,7 +1622,7 @@ static int dlfb_usb_probe(struct usb_interface *interface,
/* We don't register a new USB class. Our client interface is fbdev */
/* allocates framebuffer driver structure, not framebuffer memory */
- info = framebuffer_alloc(0, &usbdev->dev);
+ info = framebuffer_alloc(0, &interface->dev);
if (!info) {
retval = -ENOMEM;
pr_err("framebuffer_alloc failed\n");
diff --git a/drivers/video/valkyriefb.c b/drivers/video/valkyriefb.c
index 6b52bf65f0b5..3f5a041601da 100644
--- a/drivers/video/valkyriefb.c
+++ b/drivers/video/valkyriefb.c
@@ -555,7 +555,7 @@ static int __init valkyrie_init_info(struct fb_info *info,
/*
- * Parse user speficied options (`video=valkyriefb:')
+ * Parse user specified options (`video=valkyriefb:')
*/
int __init valkyriefb_setup(char *options)
{
diff --git a/drivers/video/via/via_modesetting.h b/drivers/video/via/via_modesetting.h
index ae35cfdeb37c..013884543e91 100644
--- a/drivers/video/via/via_modesetting.h
+++ b/drivers/video/via/via_modesetting.h
@@ -28,6 +28,11 @@
#include <linux/types.h>
+
+#define VIA_PITCH_SIZE (1<<3)
+#define VIA_PITCH_MAX 0x3FF8
+
+
void via_set_primary_address(u32 addr);
void via_set_secondary_address(u32 addr);
void via_set_primary_pitch(u32 pitch);
diff --git a/drivers/video/via/viafbdev.c b/drivers/video/via/viafbdev.c
index 53aa4430d86e..09fa57cea844 100644
--- a/drivers/video/via/viafbdev.c
+++ b/drivers/video/via/viafbdev.c
@@ -151,7 +151,8 @@ static void viafb_update_fix(struct fb_info *info)
info->fix.visual =
bpp == 8 ? FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_TRUECOLOR;
- info->fix.line_length = (info->var.xres_virtual * bpp / 8 + 7) & ~7;
+ info->fix.line_length = ALIGN(info->var.xres_virtual * bpp / 8,
+ VIA_PITCH_SIZE);
}
static void viafb_setup_fixinfo(struct fb_fix_screeninfo *fix,
@@ -238,8 +239,12 @@ static int viafb_check_var(struct fb_var_screeninfo *var,
depth = 24;
viafb_fill_var_color_info(var, depth);
- line = (var->xres_virtual * var->bits_per_pixel / 8 + 7) & ~7;
- if (line * var->yres_virtual > ppar->memsize)
+ if (var->xres_virtual < var->xres)
+ var->xres_virtual = var->xres;
+
+ line = ALIGN(var->xres_virtual * var->bits_per_pixel / 8,
+ VIA_PITCH_SIZE);
+ if (line > VIA_PITCH_MAX || line * var->yres_virtual > ppar->memsize)
return -EINVAL;
/* Based on var passed in to calculate the refresh,
@@ -348,8 +353,9 @@ static int viafb_pan_display(struct fb_var_screeninfo *var,
struct fb_info *info)
{
struct viafb_par *viapar = info->par;
- u32 vram_addr = (var->yoffset * var->xres_virtual + var->xoffset)
- * (var->bits_per_pixel / 8) + viapar->vram_addr;
+ u32 vram_addr = viapar->vram_addr
+ + var->yoffset * info->fix.line_length
+ + var->xoffset * info->var.bits_per_pixel / 8;
DEBUG_MSG(KERN_DEBUG "viafb_pan_display, address = %d\n", vram_addr);
if (!viafb_dual_fb) {
diff --git a/drivers/video/xilinxfb.c b/drivers/video/xilinxfb.c
index 77dea015ff69..fcb6cd90f64d 100644
--- a/drivers/video/xilinxfb.c
+++ b/drivers/video/xilinxfb.c
@@ -23,7 +23,6 @@
#include <linux/device.h>
#include <linux/module.h>
#include <linux/kernel.h>
-#include <linux/version.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>