diff options
| -rw-r--r-- | drivers/pinctrl/qcom/pinctrl-msm.c | 21 |
1 files changed, 21 insertions, 0 deletions
diff --git a/drivers/pinctrl/qcom/pinctrl-msm.c b/drivers/pinctrl/qcom/pinctrl-msm.c index a2abfe987ab1..8bf8b21954fe 100644 --- a/drivers/pinctrl/qcom/pinctrl-msm.c +++ b/drivers/pinctrl/qcom/pinctrl-msm.c @@ -51,6 +51,7 @@ * detection. * @skip_wake_irqs: Skip IRQs that are handled by wakeup interrupt controller * @disabled_for_mux: These IRQs were disabled because we muxed away. + * @ever_gpio: This bit is set the first time we mux a pin to gpio_func. * @soc: Reference to soc_data of platform specific data. * @regs: Base addresses for the TLMM tiles. * @phys_base: Physical base address @@ -72,6 +73,7 @@ struct msm_pinctrl { DECLARE_BITMAP(enabled_irqs, MAX_NR_GPIO); DECLARE_BITMAP(skip_wake_irqs, MAX_NR_GPIO); DECLARE_BITMAP(disabled_for_mux, MAX_NR_GPIO); + DECLARE_BITMAP(ever_gpio, MAX_NR_GPIO); const struct msm_pinctrl_soc_data *soc; void __iomem *regs[MAX_NR_TILES]; @@ -218,6 +220,25 @@ static int msm_pinmux_set_mux(struct pinctrl_dev *pctldev, val = msm_readl_ctl(pctrl, g); + /* + * If this is the first time muxing to GPIO and the direction is + * output, make sure that we're not going to be glitching the pin + * by reading the current state of the pin and setting it as the + * output. + */ + if (i == gpio_func && (val & BIT(g->oe_bit)) && + !test_and_set_bit(group, pctrl->ever_gpio)) { + u32 io_val = msm_readl_io(pctrl, g); + + if (io_val & BIT(g->in_bit)) { + if (!(io_val & BIT(g->out_bit))) + msm_writel_io(io_val | BIT(g->out_bit), pctrl, g); + } else { + if (io_val & BIT(g->out_bit)) + msm_writel_io(io_val & ~BIT(g->out_bit), pctrl, g); + } + } + if (egpio_func && i == egpio_func) { if (val & BIT(g->egpio_present)) val &= ~BIT(g->egpio_enable); |