diff options
-rw-r--r-- | drivers/input/touchscreen/Kconfig | 12 | ||||
-rw-r--r-- | drivers/input/touchscreen/Makefile | 1 | ||||
-rw-r--r-- | drivers/input/touchscreen/msg2638.c | 337 |
3 files changed, 350 insertions, 0 deletions
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index aead3ad6ba6a..db1a4c78eec3 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -590,6 +590,18 @@ config TOUCHSCREEN_MELFAS_MIP4 To compile this driver as a module, choose M here: the module will be called melfas_mip4. +config TOUCHSCREEN_MSG2638 + tristate "MStar msg2638 touchscreen support" + depends on I2C + depends on GPIOLIB || COMPILE_TEST + help + Say Y here if you have an I2C touchscreen using MStar msg2638. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called msg2638. + config TOUCHSCREEN_MTOUCH tristate "MicroTouch serial touchscreens" select SERIO diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile index 80cd241b4c1b..ee1d3d3fd918 100644 --- a/drivers/input/touchscreen/Makefile +++ b/drivers/input/touchscreen/Makefile @@ -58,6 +58,7 @@ obj-$(CONFIG_TOUCHSCREEN_MCS5000) += mcs5000_ts.o obj-$(CONFIG_TOUCHSCREEN_MELFAS_MIP4) += melfas_mip4.o obj-$(CONFIG_TOUCHSCREEN_MIGOR) += migor_ts.o obj-$(CONFIG_TOUCHSCREEN_MMS114) += mms114.o +obj-$(CONFIG_TOUCHSCREEN_MSG2638) += msg2638.o obj-$(CONFIG_TOUCHSCREEN_MTOUCH) += mtouch.o obj-$(CONFIG_TOUCHSCREEN_MK712) += mk712.o obj-$(CONFIG_TOUCHSCREEN_HP600) += hp680_ts_input.o diff --git a/drivers/input/touchscreen/msg2638.c b/drivers/input/touchscreen/msg2638.c new file mode 100644 index 000000000000..75536bc88969 --- /dev/null +++ b/drivers/input/touchscreen/msg2638.c @@ -0,0 +1,337 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Driver for MStar msg2638 touchscreens + * + * Copyright (c) 2021 Vincent Knecht <vincent.knecht@mailoo.org> + * + * Checksum and IRQ handler based on mstar_drv_common.c and + * mstar_drv_mutual_fw_control.c + * Copyright (c) 2006-2012 MStar Semiconductor, Inc. + * + * Driver structure based on zinitix.c by Michael Srba <Michael.Srba@seznam.cz> + */ + +#include <linux/delay.h> +#include <linux/gpio/consumer.h> +#include <linux/i2c.h> +#include <linux/input.h> +#include <linux/input/mt.h> +#include <linux/input/touchscreen.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/mod_devicetable.h> +#include <linux/module.h> +#include <linux/regulator/consumer.h> +#include <linux/slab.h> + +#define MODE_DATA_RAW 0x5A + +#define MAX_SUPPORTED_FINGER_NUM 5 + +#define CHIP_ON_DELAY_MS 15 +#define FIRMWARE_ON_DELAY_MS 50 +#define RESET_DELAY_MIN_US 10000 +#define RESET_DELAY_MAX_US 11000 + +struct packet { + u8 xy_hi; /* higher bits of x and y coordinates */ + u8 x_low; + u8 y_low; + u8 pressure; +}; + +struct touch_event { + u8 mode; + struct packet pkt[MAX_SUPPORTED_FINGER_NUM]; + u8 proximity; + u8 checksum; +}; + +struct msg2638_ts_data { + struct i2c_client *client; + struct input_dev *input_dev; + struct touchscreen_properties prop; + struct regulator_bulk_data supplies[2]; + struct gpio_desc *reset_gpiod; +}; + +static u8 msg2638_checksum(u8 *data, u32 length) +{ + s32 sum = 0; + u32 i; + + for (i = 0; i < length; i++) + sum += data[i]; + + return (u8)((-sum) & 0xFF); +} + +static irqreturn_t msg2638_ts_irq_handler(int irq, void *msg2638_handler) +{ + struct msg2638_ts_data *msg2638 = msg2638_handler; + struct i2c_client *client = msg2638->client; + struct input_dev *input = msg2638->input_dev; + struct touch_event touch_event; + u32 len = sizeof(touch_event); + struct i2c_msg msg[] = { + { + .addr = client->addr, + .flags = I2C_M_RD, + .len = sizeof(touch_event), + .buf = (u8 *)&touch_event, + }, + }; + struct packet *p; + u16 x, y; + int ret; + int i; + + ret = i2c_transfer(client->adapter, msg, ARRAY_SIZE(msg)); + if (ret != ARRAY_SIZE(msg)) { + dev_err(&client->dev, + "Failed I2C transfer in irq handler: %d\n", + ret < 0 ? ret : -EIO); + goto out; + } + + if (touch_event.mode != MODE_DATA_RAW) + goto out; + + if (msg2638_checksum((u8 *)&touch_event, len - 1) != + touch_event.checksum) { + dev_err(&client->dev, "Failed checksum!\n"); + goto out; + } + + for (i = 0; i < MAX_SUPPORTED_FINGER_NUM; i++) { + p = &touch_event.pkt[i]; + + /* Ignore non-pressed finger data */ + if (p->xy_hi == 0xFF && p->x_low == 0xFF && p->y_low == 0xFF) + continue; + + x = (((p->xy_hi & 0xF0) << 4) | p->x_low); + y = (((p->xy_hi & 0x0F) << 8) | p->y_low); + + input_mt_slot(input, i); + input_mt_report_slot_state(input, MT_TOOL_FINGER, true); + touchscreen_report_pos(input, &msg2638->prop, x, y, true); + } + + input_mt_sync_frame(msg2638->input_dev); + input_sync(msg2638->input_dev); + +out: + return IRQ_HANDLED; +} + +static void msg2638_reset(struct msg2638_ts_data *msg2638) +{ + gpiod_set_value_cansleep(msg2638->reset_gpiod, 1); + usleep_range(RESET_DELAY_MIN_US, RESET_DELAY_MAX_US); + gpiod_set_value_cansleep(msg2638->reset_gpiod, 0); + msleep(FIRMWARE_ON_DELAY_MS); +} + +static int msg2638_start(struct msg2638_ts_data *msg2638) +{ + int error; + + error = regulator_bulk_enable(ARRAY_SIZE(msg2638->supplies), + msg2638->supplies); + if (error) { + dev_err(&msg2638->client->dev, + "Failed to enable regulators: %d\n", error); + return error; + } + + msleep(CHIP_ON_DELAY_MS); + + msg2638_reset(msg2638); + + enable_irq(msg2638->client->irq); + + return 0; +} + +static int msg2638_stop(struct msg2638_ts_data *msg2638) +{ + int error; + + disable_irq(msg2638->client->irq); + + error = regulator_bulk_disable(ARRAY_SIZE(msg2638->supplies), + msg2638->supplies); + if (error) { + dev_err(&msg2638->client->dev, + "Failed to disable regulators: %d\n", error); + return error; + } + + return 0; +} + +static int msg2638_input_open(struct input_dev *dev) +{ + struct msg2638_ts_data *msg2638 = input_get_drvdata(dev); + + return msg2638_start(msg2638); +} + +static void msg2638_input_close(struct input_dev *dev) +{ + struct msg2638_ts_data *msg2638 = input_get_drvdata(dev); + + msg2638_stop(msg2638); +} + +static int msg2638_init_input_dev(struct msg2638_ts_data *msg2638) +{ + struct device *dev = &msg2638->client->dev; + struct input_dev *input_dev; + int error; + + input_dev = devm_input_allocate_device(dev); + if (!input_dev) { + dev_err(dev, "Failed to allocate input device.\n"); + return -ENOMEM; + } + + input_set_drvdata(input_dev, msg2638); + msg2638->input_dev = input_dev; + + input_dev->name = "MStar TouchScreen"; + input_dev->phys = "input/ts"; + input_dev->id.bustype = BUS_I2C; + input_dev->open = msg2638_input_open; + input_dev->close = msg2638_input_close; + + input_set_capability(input_dev, EV_ABS, ABS_MT_POSITION_X); + input_set_capability(input_dev, EV_ABS, ABS_MT_POSITION_Y); + + touchscreen_parse_properties(input_dev, true, &msg2638->prop); + if (!msg2638->prop.max_x || !msg2638->prop.max_y) { + dev_err(dev, "touchscreen-size-x and/or touchscreen-size-y not set in properties\n"); + return -EINVAL; + } + + error = input_mt_init_slots(input_dev, MAX_SUPPORTED_FINGER_NUM, + INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED); + if (error) { + dev_err(dev, "Failed to initialize MT slots: %d\n", error); + return error; + } + + error = input_register_device(input_dev); + if (error) { + dev_err(dev, "Failed to register input device: %d\n", error); + return error; + } + + return 0; +} + +static int msg2638_ts_probe(struct i2c_client *client) +{ + struct device *dev = &client->dev; + struct msg2638_ts_data *msg2638; + int error; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { + dev_err(dev, "Failed to assert adapter's support for plain I2C.\n"); + return -ENXIO; + } + + msg2638 = devm_kzalloc(dev, sizeof(*msg2638), GFP_KERNEL); + if (!msg2638) + return -ENOMEM; + + msg2638->client = client; + i2c_set_clientdata(client, msg2638); + + msg2638->supplies[0].supply = "vdd"; + msg2638->supplies[1].supply = "vddio"; + error = devm_regulator_bulk_get(dev, ARRAY_SIZE(msg2638->supplies), + msg2638->supplies); + if (error) { + dev_err(dev, "Failed to get regulators: %d\n", error); + return error; + } + + msg2638->reset_gpiod = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW); + if (IS_ERR(msg2638->reset_gpiod)) { + error = PTR_ERR(msg2638->reset_gpiod); + dev_err(dev, "Failed to request reset GPIO: %d\n", error); + return error; + } + + error = msg2638_init_input_dev(msg2638); + if (error) { + dev_err(dev, "Failed to initialize input device: %d\n", error); + return error; + } + + error = devm_request_threaded_irq(dev, client->irq, + NULL, msg2638_ts_irq_handler, + IRQF_ONESHOT | IRQF_NO_AUTOEN, + client->name, msg2638); + if (error) { + dev_err(dev, "Failed to request IRQ: %d\n", error); + return error; + } + + return 0; +} + +static int __maybe_unused msg2638_suspend(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct msg2638_ts_data *msg2638 = i2c_get_clientdata(client); + + mutex_lock(&msg2638->input_dev->mutex); + + if (input_device_enabled(msg2638->input_dev)) + msg2638_stop(msg2638); + + mutex_unlock(&msg2638->input_dev->mutex); + + return 0; +} + +static int __maybe_unused msg2638_resume(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct msg2638_ts_data *msg2638 = i2c_get_clientdata(client); + int ret = 0; + + mutex_lock(&msg2638->input_dev->mutex); + + if (input_device_enabled(msg2638->input_dev)) + ret = msg2638_start(msg2638); + + mutex_unlock(&msg2638->input_dev->mutex); + + return ret; +} + +static SIMPLE_DEV_PM_OPS(msg2638_pm_ops, msg2638_suspend, msg2638_resume); + +static const struct of_device_id msg2638_of_match[] = { + { .compatible = "mstar,msg2638" }, + { } +}; +MODULE_DEVICE_TABLE(of, msg2638_of_match); + +static struct i2c_driver msg2638_ts_driver = { + .probe_new = msg2638_ts_probe, + .driver = { + .name = "MStar-TS", + .pm = &msg2638_pm_ops, + .of_match_table = msg2638_of_match, + }, +}; +module_i2c_driver(msg2638_ts_driver); + +MODULE_AUTHOR("Vincent Knecht <vincent.knecht@mailoo.org>"); +MODULE_DESCRIPTION("MStar MSG2638 touchscreen driver"); +MODULE_LICENSE("GPL v2"); |