summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--Documentation/ABI/testing/sysfs-firmware-sfi15
-rw-r--r--Documentation/ABI/testing/sysfs-platform-kim2
-rw-r--r--Documentation/admin-guide/kernel-parameters.txt6
-rw-r--r--MAINTAINERS9
-rw-r--r--arch/x86/Kconfig19
-rw-r--r--arch/x86/include/asm/apb_timer.h40
-rw-r--r--arch/x86/include/asm/fixmap.h3
-rw-r--r--arch/x86/include/asm/intel-mid.h93
-rw-r--r--arch/x86/include/asm/intel_mid_vrtc.h10
-rw-r--r--arch/x86/include/asm/intel_scu_ipc.h2
-rw-r--r--arch/x86/include/asm/intel_scu_ipc_legacy.h91
-rw-r--r--arch/x86/include/asm/platform_sst_audio.h2
-rw-r--r--arch/x86/kernel/Makefile1
-rw-r--r--arch/x86/kernel/apb_timer.c347
-rw-r--r--arch/x86/kernel/apic/io_apic.c4
-rw-r--r--arch/x86/kernel/setup.c2
-rw-r--r--arch/x86/pci/intel_mid_pci.c18
-rw-r--r--arch/x86/pci/mmconfig-shared.c6
-rw-r--r--arch/x86/platform/Makefile1
-rw-r--r--arch/x86/platform/intel-mid/Makefile7
-rw-r--r--arch/x86/platform/intel-mid/device_libs/Makefile32
-rw-r--r--arch/x86/platform/intel-mid/device_libs/platform_bcm43xx.c101
-rw-r--r--arch/x86/platform/intel-mid/device_libs/platform_bma023.c16
-rw-r--r--arch/x86/platform/intel-mid/device_libs/platform_bt.c101
-rw-r--r--arch/x86/platform/intel-mid/device_libs/platform_emc1403.c39
-rw-r--r--arch/x86/platform/intel-mid/device_libs/platform_gpio_keys.c81
-rw-r--r--arch/x86/platform/intel-mid/device_libs/platform_lis331.c37
-rw-r--r--arch/x86/platform/intel-mid/device_libs/platform_max7315.c77
-rw-r--r--arch/x86/platform/intel-mid/device_libs/platform_mpu3050.c32
-rw-r--r--arch/x86/platform/intel-mid/device_libs/platform_mrfld_pinctrl.c39
-rw-r--r--arch/x86/platform/intel-mid/device_libs/platform_mrfld_power_btn.c78
-rw-r--r--arch/x86/platform/intel-mid/device_libs/platform_mrfld_rtc.c44
-rw-r--r--arch/x86/platform/intel-mid/device_libs/platform_mrfld_sd.c43
-rw-r--r--arch/x86/platform/intel-mid/device_libs/platform_mrfld_spidev.c50
-rw-r--r--arch/x86/platform/intel-mid/device_libs/platform_msic.c83
-rw-r--r--arch/x86/platform/intel-mid/device_libs/platform_msic.h15
-rw-r--r--arch/x86/platform/intel-mid/device_libs/platform_msic_audio.c42
-rw-r--r--arch/x86/platform/intel-mid/device_libs/platform_msic_battery.c32
-rw-r--r--arch/x86/platform/intel-mid/device_libs/platform_msic_gpio.c43
-rw-r--r--arch/x86/platform/intel-mid/device_libs/platform_msic_ocd.c44
-rw-r--r--arch/x86/platform/intel-mid/device_libs/platform_msic_power_btn.c31
-rw-r--r--arch/x86/platform/intel-mid/device_libs/platform_msic_thermal.c32
-rw-r--r--arch/x86/platform/intel-mid/device_libs/platform_pcal9555a.c95
-rw-r--r--arch/x86/platform/intel-mid/device_libs/platform_tc35876x.c42
-rw-r--r--arch/x86/platform/intel-mid/device_libs/platform_tca6416.c53
-rw-r--r--arch/x86/platform/intel-mid/intel-mid.c106
-rw-r--r--arch/x86/platform/intel-mid/intel_mid_vrtc.c173
-rw-r--r--arch/x86/platform/intel-mid/sfi.c543
-rw-r--r--arch/x86/platform/sfi/Makefile2
-rw-r--r--arch/x86/platform/sfi/sfi.c100
-rw-r--r--drivers/Makefile2
-rw-r--r--drivers/cpufreq/Kconfig.x8610
-rw-r--r--drivers/cpufreq/Makefile1
-rw-r--r--drivers/cpufreq/sfi-cpufreq.c127
-rw-r--r--drivers/mfd/Kconfig9
-rw-r--r--drivers/mfd/Makefile1
-rw-r--r--drivers/mfd/intel_msic.c425
-rw-r--r--drivers/platform/x86/intel_scu_pcidrv.c22
-rw-r--r--drivers/sfi/Kconfig18
-rw-r--r--drivers/sfi/Makefile4
-rw-r--r--drivers/sfi/sfi_acpi.c214
-rw-r--r--drivers/sfi/sfi_core.c522
-rw-r--r--drivers/sfi/sfi_core.h81
-rw-r--r--drivers/staging/media/atomisp/include/linux/atomisp_platform.h1
-rw-r--r--include/linux/mfd/intel_msic.h453
-rw-r--r--include/linux/sfi.h210
-rw-r--r--include/linux/sfi_acpi.h93
-rw-r--r--init/main.c2
68 files changed, 41 insertions, 5038 deletions
diff --git a/Documentation/ABI/testing/sysfs-firmware-sfi b/Documentation/ABI/testing/sysfs-firmware-sfi
deleted file mode 100644
index 5210e0f06ddb..000000000000
--- a/Documentation/ABI/testing/sysfs-firmware-sfi
+++ /dev/null
@@ -1,15 +0,0 @@
-What: /sys/firmware/sfi/tables/
-Date: May 2010
-Contact: Len Brown <lenb@kernel.org>
-Description:
- SFI defines a number of small static memory tables
- so the kernel can get platform information from firmware.
-
- The tables are defined in the latest SFI specification:
- http://simplefirmware.org/documentation
-
- While the tables are used by the kernel, user-space
- can observe them this way::
-
- # cd /sys/firmware/sfi/tables
- # cat $TABLENAME > $TABLENAME.bin
diff --git a/Documentation/ABI/testing/sysfs-platform-kim b/Documentation/ABI/testing/sysfs-platform-kim
index a7f81de68046..6a52d6d2b601 100644
--- a/Documentation/ABI/testing/sysfs-platform-kim
+++ b/Documentation/ABI/testing/sysfs-platform-kim
@@ -7,7 +7,7 @@ Description:
is connected. example: "/dev/ttyS0".
The device name flows down to architecture specific board
- initialization file from the SFI/ATAGS bootloader
+ initialization file from the ATAGS bootloader
firmware. The name exposed is read from the user-space
dameon and opens the device when install is requested.
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index da949b205037..186ad235bf32 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -5990,12 +5990,6 @@
default x2apic cluster mode on platforms
supporting x2apic.
- x86_intel_mid_timer= [X86-32,APBT]
- Choose timer option for x86 Intel MID platform.
- Two valid options are apbt timer only and lapic timer
- plus one apbt timer for broadcast timer.
- x86_intel_mid_timer=apbt_only | lapic_and_apbt
-
xen_512gb_limit [KNL,X86-64,XEN]
Restricts the kernel running paravirtualized under Xen
to use only up to 512 GB of RAM. The reason to do so is
diff --git a/MAINTAINERS b/MAINTAINERS
index e91fe5b33b0e..878e558f5d7e 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -9122,9 +9122,7 @@ F: drivers/gpio/gpio-*cove.c
INTEL PMIC MULTIFUNCTION DEVICE DRIVERS
M: Andy Shevchenko <andy@kernel.org>
S: Maintained
-F: drivers/mfd/intel_msic.c
F: drivers/mfd/intel_soc_pmic*
-F: include/linux/mfd/intel_msic.h
F: include/linux/mfd/intel_soc_pmic*
INTEL PMT DRIVER
@@ -16322,13 +16320,6 @@ S: Maintained
F: Documentation/devicetree/bindings/i3c/silvaco,i3c-master.yaml
F: drivers/i3c/master/svc-i3c-master.c
-SIMPLE FIRMWARE INTERFACE (SFI)
-S: Obsolete
-W: http://simplefirmware.org/
-F: arch/x86/platform/sfi/
-F: drivers/sfi/
-F: include/linux/sfi*.h
-
SIMPLEFB FB DRIVER
M: Hans de Goede <hdegoede@redhat.com>
L: linux-fbdev@vger.kernel.org
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 792517c078c5..3b2102024906 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -448,7 +448,7 @@ config X86_X2APIC
If you don't know what to do here, say N.
config X86_MPPARSE
- bool "Enable MPS table" if ACPI || SFI
+ bool "Enable MPS table" if ACPI
default y
depends on X86_LOCAL_APIC
help
@@ -607,7 +607,6 @@ config X86_INTEL_MID
depends on PCI
depends on X86_64 || (PCI_GOANY && X86_32)
depends on X86_IO_APIC
- select SFI
select I2C
select DW_APB_TIMER
select APB_TIMER
@@ -896,18 +895,6 @@ config HPET_EMULATE_RTC
def_bool y
depends on HPET_TIMER && (RTC_DRV_CMOS=m || RTC_DRV_CMOS=y)
-config APB_TIMER
- def_bool y if X86_INTEL_MID
- prompt "Intel MID APB Timer Support" if X86_INTEL_MID
- select DW_APB_TIMER
- depends on X86_INTEL_MID && SFI
- help
- APB timer is the replacement for 8254, HPET on X86 MID platforms.
- The APBT provides a stable time base on SMP
- systems, unlike the TSC, but it is more expensive to access,
- as it is off-chip. APB timers are always running regardless of CPU
- C states, they are used as per CPU clockevent device when possible.
-
# Mark as expert because too many people got it wrong.
# The code disables itself when not needed.
config DMI
@@ -2469,8 +2456,6 @@ source "kernel/power/Kconfig"
source "drivers/acpi/Kconfig"
-source "drivers/sfi/Kconfig"
-
config X86_APM_BOOT
def_bool y
depends on APM
@@ -2657,7 +2642,7 @@ config PCI_DIRECT
config PCI_MMCONFIG
bool "Support mmconfig PCI config space access" if X86_64
default y
- depends on PCI && (ACPI || SFI || JAILHOUSE_GUEST)
+ depends on PCI && (ACPI || JAILHOUSE_GUEST)
depends on X86_64 || (PCI_GOANY || PCI_GOMMCONFIG)
config PCI_OLPC
diff --git a/arch/x86/include/asm/apb_timer.h b/arch/x86/include/asm/apb_timer.h
deleted file mode 100644
index 87ce8e963215..000000000000
--- a/arch/x86/include/asm/apb_timer.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * apb_timer.h: Driver for Langwell APB timer based on Synopsis DesignWare
- *
- * (C) Copyright 2009 Intel Corporation
- * Author: Jacob Pan (jacob.jun.pan@intel.com)
- *
- * Note:
- */
-
-#ifndef ASM_X86_APBT_H
-#define ASM_X86_APBT_H
-#include <linux/sfi.h>
-
-#ifdef CONFIG_APB_TIMER
-
-/* default memory mapped register base */
-#define LNW_SCU_ADDR 0xFF100000
-#define LNW_EXT_TIMER_OFFSET 0x1B800
-#define APBT_DEFAULT_BASE (LNW_SCU_ADDR+LNW_EXT_TIMER_OFFSET)
-#define LNW_EXT_TIMER_PGOFFSET 0x800
-
-/* APBT clock speed range from PCLK to fabric base, 25-100MHz */
-#define APBT_MAX_FREQ 50000000
-#define APBT_MIN_FREQ 1000000
-#define APBT_MMAP_SIZE 1024
-
-extern void apbt_time_init(void);
-extern void apbt_setup_secondary_clock(void);
-
-extern struct sfi_timer_table_entry *sfi_get_mtmr(int hint);
-extern void sfi_free_mtmr(struct sfi_timer_table_entry *mtmr);
-extern int sfi_mtimer_num;
-
-#else /* CONFIG_APB_TIMER */
-
-static inline void apbt_time_init(void) { }
-
-#endif
-#endif /* ASM_X86_APBT_H */
diff --git a/arch/x86/include/asm/fixmap.h b/arch/x86/include/asm/fixmap.h
index 9f1a0a987e5e..d0dcefb5cc59 100644
--- a/arch/x86/include/asm/fixmap.h
+++ b/arch/x86/include/asm/fixmap.h
@@ -108,9 +108,6 @@ enum fixed_addresses {
#ifdef CONFIG_PARAVIRT_XXL
FIX_PARAVIRT_BOOTMAP,
#endif
-#ifdef CONFIG_X86_INTEL_MID
- FIX_LNW_VRTC,
-#endif
#ifdef CONFIG_ACPI_APEI_GHES
/* Used for GHES mapping from assorted contexts */
diff --git a/arch/x86/include/asm/intel-mid.h b/arch/x86/include/asm/intel-mid.h
index cf0e25f45422..c201083b34f6 100644
--- a/arch/x86/include/asm/intel-mid.h
+++ b/arch/x86/include/asm/intel-mid.h
@@ -1,15 +1,13 @@
/* SPDX-License-Identifier: GPL-2.0-only */
/*
- * intel-mid.h: Intel MID specific setup code
+ * Intel MID specific setup code
*
- * (C) Copyright 2009 Intel Corporation
+ * (C) Copyright 2009, 2021 Intel Corporation
*/
#ifndef _ASM_X86_INTEL_MID_H
#define _ASM_X86_INTEL_MID_H
-#include <linux/sfi.h>
#include <linux/pci.h>
-#include <linux/platform_device.h>
extern int intel_mid_pci_init(void);
extern int intel_mid_pci_set_power_state(struct pci_dev *pdev, pci_power_t state);
@@ -22,93 +20,18 @@ extern void intel_mid_pwr_power_off(void);
extern int intel_mid_pwr_get_lss_id(struct pci_dev *pdev);
-extern int get_gpio_by_name(const char *name);
-extern int __init sfi_parse_mrtc(struct sfi_table_header *table);
-extern int __init sfi_parse_mtmr(struct sfi_table_header *table);
-extern int sfi_mrtc_num;
-extern struct sfi_rtc_table_entry sfi_mrtc_array[];
-
-/*
- * Here defines the array of devices platform data that IAFW would export
- * through SFI "DEVS" table, we use name and type to match the device and
- * its platform data.
- */
-struct devs_id {
- char name[SFI_NAME_LEN + 1];
- u8 type;
- u8 delay;
- u8 msic;
- void *(*get_platform_data)(void *info);
-};
-
-#define sfi_device(i) \
- static const struct devs_id *const __intel_mid_sfi_##i##_dev __used \
- __section(".x86_intel_mid_dev.init") = &i
-
-/**
-* struct mid_sd_board_info - template for SD device creation
-* @name: identifies the driver
-* @bus_num: board-specific identifier for a given SD controller
-* @max_clk: the maximum frequency device supports
-* @platform_data: the particular data stored there is driver-specific
-*/
-struct mid_sd_board_info {
- char name[SFI_NAME_LEN];
- int bus_num;
- unsigned short addr;
- u32 max_clk;
- void *platform_data;
-};
-
-/*
- * Medfield is the follow-up of Moorestown, it combines two chip solution into
- * one. Other than that it also added always-on and constant tsc and lapic
- * timers. Medfield is the platform name, and the chip name is called Penwell
- * we treat Medfield/Penwell as a variant of Moorestown. Penwell can be
- * identified via MSRs.
- */
-enum intel_mid_cpu_type {
- /* 1 was Moorestown */
- INTEL_MID_CPU_CHIP_PENWELL = 2,
- INTEL_MID_CPU_CHIP_CLOVERVIEW,
- INTEL_MID_CPU_CHIP_TANGIER,
-};
-
-extern enum intel_mid_cpu_type __intel_mid_cpu_chip;
-
#ifdef CONFIG_X86_INTEL_MID
-static inline enum intel_mid_cpu_type intel_mid_identify_cpu(void)
-{
- return __intel_mid_cpu_chip;
-}
-
-static inline bool intel_mid_has_msic(void)
-{
- return (intel_mid_identify_cpu() == INTEL_MID_CPU_CHIP_PENWELL);
-}
-
extern void intel_scu_devices_create(void);
extern void intel_scu_devices_destroy(void);
#else /* !CONFIG_X86_INTEL_MID */
-#define intel_mid_identify_cpu() 0
-#define intel_mid_has_msic() 0
-
static inline void intel_scu_devices_create(void) { }
static inline void intel_scu_devices_destroy(void) { }
#endif /* !CONFIG_X86_INTEL_MID */
-enum intel_mid_timer_options {
- INTEL_MID_TIMER_DEFAULT,
- INTEL_MID_TIMER_APBT_ONLY,
- INTEL_MID_TIMER_LAPIC_APBT,
-};
-
-extern enum intel_mid_timer_options intel_mid_timer_options;
-
/* Bus Select SoC Fuse value */
#define BSEL_SOC_FUSE_MASK 0x7
/* FSB 133MHz */
@@ -118,16 +41,4 @@ extern enum intel_mid_timer_options intel_mid_timer_options;
/* FSB 83MHz */
#define BSEL_SOC_FUSE_111 0x7
-#define SFI_MTMR_MAX_NUM 8
-#define SFI_MRTC_MAX 8
-
-/* VRTC timer */
-#define MRST_VRTC_MAP_SZ 1024
-/* #define MRST_VRTC_PGOFFSET 0xc00 */
-
-extern void intel_mid_rtc_init(void);
-
-/* The offset for the mapping of global gpio pin to irq */
-#define INTEL_MID_IRQ_OFFSET 0x100
-
#endif /* _ASM_X86_INTEL_MID_H */
diff --git a/arch/x86/include/asm/intel_mid_vrtc.h b/arch/x86/include/asm/intel_mid_vrtc.h
deleted file mode 100644
index 0b44b1abe4d9..000000000000
--- a/arch/x86/include/asm/intel_mid_vrtc.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _INTEL_MID_VRTC_H
-#define _INTEL_MID_VRTC_H
-
-extern unsigned char vrtc_cmos_read(unsigned char reg);
-extern void vrtc_cmos_write(unsigned char val, unsigned char reg);
-extern void vrtc_get_time(struct timespec64 *now);
-extern int vrtc_set_mmss(const struct timespec64 *now);
-
-#endif
diff --git a/arch/x86/include/asm/intel_scu_ipc.h b/arch/x86/include/asm/intel_scu_ipc.h
index 11d457af68c5..8537f597d20a 100644
--- a/arch/x86/include/asm/intel_scu_ipc.h
+++ b/arch/x86/include/asm/intel_scu_ipc.h
@@ -65,6 +65,4 @@ static inline int intel_scu_ipc_dev_command(struct intel_scu_ipc_dev *scu, int c
inlen, out, outlen);
}
-#include <asm/intel_scu_ipc_legacy.h>
-
#endif
diff --git a/arch/x86/include/asm/intel_scu_ipc_legacy.h b/arch/x86/include/asm/intel_scu_ipc_legacy.h
deleted file mode 100644
index 4cf13fecb673..000000000000
--- a/arch/x86/include/asm/intel_scu_ipc_legacy.h
+++ /dev/null
@@ -1,91 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _ASM_X86_INTEL_SCU_IPC_LEGACY_H_
-#define _ASM_X86_INTEL_SCU_IPC_LEGACY_H_
-
-#include <linux/notifier.h>
-
-#define IPCMSG_INDIRECT_READ 0x02
-#define IPCMSG_INDIRECT_WRITE 0x05
-
-#define IPCMSG_COLD_OFF 0x80 /* Only for Tangier */
-
-#define IPCMSG_WARM_RESET 0xF0
-#define IPCMSG_COLD_RESET 0xF1
-#define IPCMSG_SOFT_RESET 0xF2
-#define IPCMSG_COLD_BOOT 0xF3
-
-#define IPCMSG_VRTC 0xFA /* Set vRTC device */
-/* Command id associated with message IPCMSG_VRTC */
-#define IPC_CMD_VRTC_SETTIME 1 /* Set time */
-#define IPC_CMD_VRTC_SETALARM 2 /* Set alarm */
-
-/* Don't call these in new code - they will be removed eventually */
-
-/* Read single register */
-static inline int intel_scu_ipc_ioread8(u16 addr, u8 *data)
-{
- return intel_scu_ipc_dev_ioread8(NULL, addr, data);
-}
-
-/* Read a vector */
-static inline int intel_scu_ipc_readv(u16 *addr, u8 *data, int len)
-{
- return intel_scu_ipc_dev_readv(NULL, addr, data, len);
-}
-
-/* Write single register */
-static inline int intel_scu_ipc_iowrite8(u16 addr, u8 data)
-{
- return intel_scu_ipc_dev_iowrite8(NULL, addr, data);
-}
-
-/* Write a vector */
-static inline int intel_scu_ipc_writev(u16 *addr, u8 *data, int len)
-{
- return intel_scu_ipc_dev_writev(NULL, addr, data, len);
-}
-
-/* Update single register based on the mask */
-static inline int intel_scu_ipc_update_register(u16 addr, u8 data, u8 mask)
-{
- return intel_scu_ipc_dev_update(NULL, addr, data, mask);
-}
-
-/* Issue commands to the SCU with or without data */
-static inline int intel_scu_ipc_simple_command(int cmd, int sub)
-{
- return intel_scu_ipc_dev_simple_command(NULL, cmd, sub);
-}
-
-static inline int intel_scu_ipc_command(int cmd, int sub, u32 *in, int inlen,
- u32 *out, int outlen)
-{
- /* New API takes both inlen and outlen as bytes so convert here */
- size_t inbytes = inlen * sizeof(u32);
- size_t outbytes = outlen * sizeof(u32);
-
- return intel_scu_ipc_dev_command_with_size(NULL, cmd, sub, in, inbytes,
- inlen, out, outbytes);
-}
-
-extern struct blocking_notifier_head intel_scu_notifier;
-
-static inline void intel_scu_notifier_add(struct notifier_block *nb)
-{
- blocking_notifier_chain_register(&intel_scu_notifier, nb);
-}
-
-static inline void intel_scu_notifier_remove(struct notifier_block *nb)
-{
- blocking_notifier_chain_unregister(&intel_scu_notifier, nb);
-}
-
-static inline int intel_scu_notifier_post(unsigned long v, void *p)
-{
- return blocking_notifier_call_chain(&intel_scu_notifier, v, p);
-}
-
-#define SCU_AVAILABLE 1
-#define SCU_DOWN 2
-
-#endif
diff --git a/arch/x86/include/asm/platform_sst_audio.h b/arch/x86/include/asm/platform_sst_audio.h
index 16b9f220bdeb..40f92270515b 100644
--- a/arch/x86/include/asm/platform_sst_audio.h
+++ b/arch/x86/include/asm/platform_sst_audio.h
@@ -10,8 +10,6 @@
#ifndef _PLATFORM_SST_AUDIO_H_
#define _PLATFORM_SST_AUDIO_H_
-#include <linux/sfi.h>
-
#define MAX_NUM_STREAMS_MRFLD 25
#define MAX_NUM_STREAMS MAX_NUM_STREAMS_MRFLD
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index 5eeb808eb024..2ddf08351f0b 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -116,7 +116,6 @@ obj-$(CONFIG_VM86) += vm86_32.o
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
obj-$(CONFIG_HPET_TIMER) += hpet.o
-obj-$(CONFIG_APB_TIMER) += apb_timer.o
obj-$(CONFIG_AMD_NB) += amd_nb.o
obj-$(CONFIG_DEBUG_NMI_SELFTEST) += nmi_selftest.o
diff --git a/arch/x86/kernel/apb_timer.c b/arch/x86/kernel/apb_timer.c
deleted file mode 100644
index 263eeaddb0aa..000000000000
--- a/arch/x86/kernel/apb_timer.c
+++ /dev/null
@@ -1,347 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * apb_timer.c: Driver for Langwell APB timers
- *
- * (C) Copyright 2009 Intel Corporation
- * Author: Jacob Pan (jacob.jun.pan@intel.com)
- *
- * Note:
- * Langwell is the south complex of Intel Moorestown MID platform. There are
- * eight external timers in total that can be used by the operating system.
- * The timer information, such as frequency and addresses, is provided to the
- * OS via SFI tables.
- * Timer interrupts are routed via FW/HW emulated IOAPIC independently via
- * individual redirection table entries (RTE).
- * Unlike HPET, there is no master counter, therefore one of the timers are
- * used as clocksource. The overall allocation looks like:
- * - timer 0 - NR_CPUs for per cpu timer
- * - one timer for clocksource
- * - one timer for watchdog driver.
- * It is also worth notice that APB timer does not support true one-shot mode,
- * free-running mode will be used here to emulate one-shot mode.
- * APB timer can also be used as broadcast timer along with per cpu local APIC
- * timer, but by default APB timer has higher rating than local APIC timers.
- */
-
-#include <linux/delay.h>
-#include <linux/dw_apb_timer.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/pm.h>
-#include <linux/sfi.h>
-#include <linux/interrupt.h>
-#include <linux/cpu.h>
-#include <linux/irq.h>
-
-#include <asm/fixmap.h>
-#include <asm/apb_timer.h>
-#include <asm/intel-mid.h>
-#include <asm/time.h>
-
-#define APBT_CLOCKEVENT_RATING 110
-#define APBT_CLOCKSOURCE_RATING 250
-
-#define APBT_CLOCKEVENT0_NUM (0)
-#define APBT_CLOCKSOURCE_NUM (2)
-
-static phys_addr_t apbt_address;
-static int apb_timer_block_enabled;
-static void __iomem *apbt_virt_address;
-
-/*
- * Common DW APB timer info
- */
-static unsigned long apbt_freq;
-
-struct apbt_dev {
- struct dw_apb_clock_event_device *timer;
- unsigned int num;
- int cpu;
- unsigned int irq;
- char name[10];
-};
-
-static struct dw_apb_clocksource *clocksource_apbt;
-
-static inline void __iomem *adev_virt_addr(struct apbt_dev *adev)
-{
- return apbt_virt_address + adev->num * APBTMRS_REG_SIZE;
-}
-
-static DEFINE_PER_CPU(struct apbt_dev, cpu_apbt_dev);
-
-#ifdef CONFIG_SMP
-static unsigned int apbt_num_timers_used;
-#endif
-
-static inline void apbt_set_mapping(void)
-{
- struct sfi_timer_table_entry *mtmr;
- int phy_cs_timer_id = 0;
-
- if (apbt_virt_address) {
- pr_debug("APBT base already mapped\n");
- return;
- }
- mtmr = sfi_get_mtmr(APBT_CLOCKEVENT0_NUM);
- if (mtmr == NULL) {
- printk(KERN_ERR "Failed to get MTMR %d from SFI\n",
- APBT_CLOCKEVENT0_NUM);
- return;
- }
- apbt_address = (phys_addr_t)mtmr->phys_addr;
- if (!apbt_address) {
- printk(KERN_WARNING "No timer base from SFI, use default\n");
- apbt_address = APBT_DEFAULT_BASE;
- }
- apbt_virt_address = ioremap(apbt_address, APBT_MMAP_SIZE);
- if (!apbt_virt_address) {
- pr_debug("Failed mapping APBT phy address at %lu\n",\
- (unsigned long)apbt_address);
- goto panic_noapbt;
- }
- apbt_freq = mtmr->freq_hz;
- sfi_free_mtmr(mtmr);
-
- /* Now figure out the physical timer id for clocksource device */
- mtmr = sfi_get_mtmr(APBT_CLOCKSOURCE_NUM);
- if (mtmr == NULL)
- goto panic_noapbt;
-
- /* Now figure out the physical timer id */
- pr_debug("Use timer %d for clocksource\n",
- (int)(mtmr->phys_addr & 0xff) / APBTMRS_REG_SIZE);
- phy_cs_timer_id = (unsigned int)(mtmr->phys_addr & 0xff) /
- APBTMRS_REG_SIZE;
-
- clocksource_apbt = dw_apb_clocksource_init(APBT_CLOCKSOURCE_RATING,
- "apbt0", apbt_virt_address + phy_cs_timer_id *
- APBTMRS_REG_SIZE, apbt_freq);
- return;
-
-panic_noapbt:
- panic("Failed to setup APB system timer\n");
-
-}
-
-static inline void apbt_clear_mapping(void)
-{
- iounmap(apbt_virt_address);
- apbt_virt_address = NULL;
-}
-
-static int __init apbt_clockevent_register(void)
-{
- struct sfi_timer_table_entry *mtmr;
- struct apbt_dev *adev = this_cpu_ptr(&cpu_apbt_dev);
-
- mtmr = sfi_get_mtmr(APBT_CLOCKEVENT0_NUM);
- if (mtmr == NULL) {
- printk(KERN_ERR "Failed to get MTMR %d from SFI\n",
- APBT_CLOCKEVENT0_NUM);
- return -ENODEV;
- }
-
- adev->num = smp_processor_id();
- adev->timer = dw_apb_clockevent_init(smp_processor_id(), "apbt0",
- intel_mid_timer_options == INTEL_MID_TIMER_LAPIC_APBT ?
- APBT_CLOCKEVENT_RATING - 100 : APBT_CLOCKEVENT_RATING,
- adev_virt_addr(adev), 0, apbt_freq);
- /* Firmware does EOI handling for us. */
- adev->timer->eoi = NULL;
-
- if (intel_mid_timer_options == INTEL_MID_TIMER_LAPIC_APBT) {
- global_clock_event = &adev->timer->ced;
- printk(KERN_DEBUG "%s clockevent registered as global\n",
- global_clock_event->name);
- }
-
- dw_apb_clockevent_register(adev->timer);
-
- sfi_free_mtmr(mtmr);
- return 0;
-}
-
-#ifdef CONFIG_SMP
-
-static void apbt_setup_irq(struct apbt_dev *adev)
-{
- irq_modify_status(adev->irq, 0, IRQ_MOVE_PCNTXT);
- irq_set_affinity(adev->irq, cpumask_of(adev->cpu));
-}
-
-/* Should be called with per cpu */
-void apbt_setup_secondary_clock(void)
-{
- struct apbt_dev *adev;
- int cpu;
-
- /* Don't register boot CPU clockevent */
- cpu = smp_processor_id();
- if (!cpu)
- return;
-
- adev = this_cpu_ptr(&cpu_apbt_dev);
- if (!adev->timer) {
- adev->timer = dw_apb_clockevent_init(cpu, adev->name,
- APBT_CLOCKEVENT_RATING, adev_virt_addr(adev),
- adev->irq, apbt_freq);
- adev->timer->eoi = NULL;
- } else {
- dw_apb_clockevent_resume(adev->timer);
- }
-
- printk(KERN_INFO "Registering CPU %d clockevent device %s, cpu %08x\n",
- cpu, adev->name, adev->cpu);
-
- apbt_setup_irq(adev);
- dw_apb_clockevent_register(adev->timer);
-
- return;
-}
-
-/*
- * this notify handler process CPU hotplug events. in case of S0i3, nonboot
- * cpus are disabled/enabled frequently, for performance reasons, we keep the
- * per cpu timer irq registered so that we do need to do free_irq/request_irq.
- *
- * TODO: it might be more reliable to directly disable percpu clockevent device
- * without the notifier chain. currently, cpu 0 may get interrupts from other
- * cpu timers during the offline process due to the ordering of notification.
- * the extra interrupt is harmless.
- */
-static int apbt_cpu_dead(unsigned int cpu)
-{
- struct apbt_dev *adev = &per_cpu(cpu_apbt_dev, cpu);
-
- dw_apb_clockevent_pause(adev->timer);
- if (system_state == SYSTEM_RUNNING) {
- pr_debug("skipping APBT CPU %u offline\n", cpu);
- } else {
- pr_debug("APBT clockevent for cpu %u offline\n", cpu);
- dw_apb_clockevent_stop(adev->timer);
- }
- return 0;
-}
-
-static __init int apbt_late_init(void)
-{
- if (intel_mid_timer_options == INTEL_MID_TIMER_LAPIC_APBT ||
- !apb_timer_block_enabled)
- return 0;
- return cpuhp_setup_state(CPUHP_X86_APB_DEAD, "x86/apb:dead", NULL,
- apbt_cpu_dead);
-}
-fs_initcall(apbt_late_init);
-#else
-
-void apbt_setup_secondary_clock(void) {}
-
-#endif /* CONFIG_SMP */
-
-static int apbt_clocksource_register(void)
-{
- u64 start, now;
- u64 t1;
-
- /* Start the counter, use timer 2 as source, timer 0/1 for event */
- dw_apb_clocksource_start(clocksource_apbt);
-
- /* Verify whether apbt counter works */
- t1 = dw_apb_clocksource_read(clocksource_apbt);
- start = rdtsc();
-
- /*
- * We don't know the TSC frequency yet, but waiting for
- * 200000 TSC cycles is safe:
- * 4 GHz == 50us
- * 1 GHz == 200us
- */
- do {
- rep_nop();
- now = rdtsc();
- } while ((now - start) < 200000UL);
-
- /* APBT is the only always on clocksource, it has to work! */
- if (t1 == dw_apb_clocksource_read(clocksource_apbt))
- panic("APBT counter not counting. APBT disabled\n");
-
- dw_apb_clocksource_register(clocksource_apbt);
-
- return 0;
-}
-
-/*
- * Early setup the APBT timer, only use timer 0 for booting then switch to
- * per CPU timer if possible.
- * returns 1 if per cpu apbt is setup
- * returns 0 if no per cpu apbt is chosen
- * panic if set up failed, this is the only platform timer on Moorestown.
- */
-void __init apbt_time_init(void)
-{
-#ifdef CONFIG_SMP
- int i;
- struct sfi_timer_table_entry *p_mtmr;
- struct apbt_dev *adev;
-#endif
-
- if (apb_timer_block_enabled)
- return;
- apbt_set_mapping();
- if (!apbt_virt_address)
- goto out_noapbt;
- /*
- * Read the frequency and check for a sane value, for ESL model
- * we extend the possible clock range to allow time scaling.
- */
-
- if (apbt_freq < APBT_MIN_FREQ || apbt_freq > APBT_MAX_FREQ) {
- pr_debug("APBT has invalid freq 0x%lx\n", apbt_freq);
- goto out_noapbt;
- }
- if (apbt_clocksource_register()) {
- pr_debug("APBT has failed to register clocksource\n");
- goto out_noapbt;
- }
- if (!apbt_clockevent_register())
- apb_timer_block_enabled = 1;
- else {
- pr_debug("APBT has failed to register clockevent\n");
- goto out_noapbt;
- }
-#ifdef CONFIG_SMP
- /* kernel cmdline disable apb timer, so we will use lapic timers */
- if (intel_mid_timer_options == INTEL_MID_TIMER_LAPIC_APBT) {
- printk(KERN_INFO "apbt: disabled per cpu timer\n");
- return;
- }
- pr_debug("%s: %d CPUs online\n", __func__, num_online_cpus());
- if (num_possible_cpus() <= sfi_mtimer_num)
- apbt_num_timers_used = num_possible_cpus();
- else
- apbt_num_timers_used = 1;
- pr_debug("%s: %d APB timers used\n", __func__, apbt_num_timers_used);
-
- /* here we set up per CPU timer data structure */
- for (i = 0; i < apbt_num_timers_used; i++) {
- adev = &per_cpu(cpu_apbt_dev, i);
- adev->num = i;
- adev->cpu = i;
- p_mtmr = sfi_get_mtmr(i);
- if (p_mtmr)
- adev->irq = p_mtmr->irq;
- else
- printk(KERN_ERR "Failed to get timer for cpu %d\n", i);
- snprintf(adev->name, sizeof(adev->name) - 1, "apbt%d", i);
- }
-#endif
-
- return;
-
-out_noapbt:
- apbt_clear_mapping();
- apb_timer_block_enabled = 0;
- panic("failed to enable APB timer\n");
-}
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index e4ab4804b20d..c3b60c37c728 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -198,7 +198,7 @@ static int __init parse_noapic(char *str)
}
early_param("noapic", parse_noapic);
-/* Will be called in mpparse/acpi/sfi codes for saving IRQ info */
+/* Will be called in mpparse/ACPI codes for saving IRQ info */
void mp_save_irq(struct mpc_intsrc *m)
{
int i;
@@ -2863,7 +2863,7 @@ int mp_register_ioapic(int id, u32 address, u32 gsi_base,
/*
* If mp_register_ioapic() is called during early boot stage when
- * walking ACPI/SFI/DT tables, it's too early to create irqdomain,
+ * walking ACPI/DT tables, it's too early to create irqdomain,
* we are still using bootmem allocator. So delay it to setup_IO_APIC().
*/
if (hotplug) {
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index 740f3bdb3f61..d883176ef2ce 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -16,7 +16,6 @@
#include <linux/memblock.h>
#include <linux/pci.h>
#include <linux/root_dev.h>
-#include <linux/sfi.h>
#include <linux/hugetlb.h>
#include <linux/tboot.h>
#include <linux/usb/xhci-dbgp.h>
@@ -1185,7 +1184,6 @@ void __init setup_arch(char **cmdline_p)
* Read APIC and some other early information from ACPI tables.
*/
acpi_boot_init();
- sfi_init();
x86_dtb_init();
/*
diff --git a/arch/x86/pci/intel_mid_pci.c b/arch/x86/pci/intel_mid_pci.c
index 95e2e6bd8d8c..8edd62206604 100644
--- a/arch/x86/pci/intel_mid_pci.c
+++ b/arch/x86/pci/intel_mid_pci.c
@@ -28,10 +28,12 @@
#include <linux/io.h>
#include <linux/smp.h>
+#include <asm/cpu_device_id.h>
#include <asm/segment.h>
#include <asm/pci_x86.h>
#include <asm/hw_irq.h>
#include <asm/io_apic.h>
+#include <asm/intel-family.h>
#include <asm/intel-mid.h>
#include <asm/acpi.h>
@@ -140,6 +142,7 @@ static int pci_device_update_fixed(struct pci_bus *bus, unsigned int devfn,
* type1_access_ok - check whether to use type 1
* @bus: bus number
* @devfn: device & function in question
+ * @reg: configuration register offset
*
* If the bus is on a Lincroft chip and it exists, or is not on a Lincroft at
* all, the we can go ahead with any reads & writes. If it's on a Lincroft,
@@ -212,10 +215,17 @@ static int pci_write(struct pci_bus *bus, unsigned int devfn, int where,
where, size, value);
}
+static const struct x86_cpu_id intel_mid_cpu_ids[] = {
+ X86_MATCH_INTEL_FAM6_MODEL(ATOM_SILVERMONT_MID, NULL),
+ {}
+};
+
static int intel_mid_pci_irq_enable(struct pci_dev *dev)
{
+ const struct x86_cpu_id *id;
struct irq_alloc_info info;
bool polarity_low;
+ u16 model = 0;
int ret;
u8 gsi;
@@ -228,8 +238,12 @@ static int intel_mid_pci_irq_enable(struct pci_dev *dev)
return ret;
}
- switch (intel_mid_identify_cpu()) {
- case INTEL_MID_CPU_CHIP_TANGIER:
+ id = x86_match_cpu(intel_mid_cpu_ids);
+ if (id)
+ model = id->model;
+
+ switch (model) {
+ case INTEL_FAM6_ATOM_SILVERMONT_MID:
polarity_low = false;
/* Special treatment for IRQ0 */
diff --git a/arch/x86/pci/mmconfig-shared.c b/arch/x86/pci/mmconfig-shared.c
index 234998f196d4..de6bf0e7e8f8 100644
--- a/arch/x86/pci/mmconfig-shared.c
+++ b/arch/x86/pci/mmconfig-shared.c
@@ -11,9 +11,9 @@
* themselves.
*/
+#include <linux/acpi.h>
#include <linux/pci.h>
#include <linux/init.h>
-#include <linux/sfi_acpi.h>
#include <linux/bitmap.h>
#include <linux/dmi.h>
#include <linux/slab.h>
@@ -665,7 +665,7 @@ void __init pci_mmcfg_early_init(void)
if (pci_mmcfg_check_hostbridge())
known_bridge = 1;
else
- acpi_sfi_table_parse(ACPI_SIG_MCFG, pci_parse_mcfg);
+ acpi_table_parse(ACPI_SIG_MCFG, pci_parse_mcfg);
__pci_mmcfg_init(1);
set_apei_filter();
@@ -683,7 +683,7 @@ void __init pci_mmcfg_late_init(void)
/* MMCONFIG hasn't been enabled yet, try again */
if (pci_probe & PCI_PROBE_MASK & ~PCI_PROBE_MMCONF) {
- acpi_sfi_table_parse(ACPI_SIG_MCFG, pci_parse_mcfg);
+ acpi_table_parse(ACPI_SIG_MCFG, pci_parse_mcfg);
__pci_mmcfg_init(0);
}
}
diff --git a/arch/x86/platform/Makefile b/arch/x86/platform/Makefile
index b2f90a1a89f1..3ed03a2552d0 100644
--- a/arch/x86/platform/Makefile
+++ b/arch/x86/platform/Makefile
@@ -10,6 +10,5 @@ obj-y += intel-mid/
obj-y += intel-quark/
obj-y += olpc/
obj-y += scx200/
-obj-y += sfi/
obj-y += ts5500/
obj-y += uv/
diff --git a/arch/x86/platform/intel-mid/Makefile b/arch/x86/platform/intel-mid/Makefile
index cc2549f0ccb1..ddfc08783fb8 100644
--- a/arch/x86/platform/intel-mid/Makefile
+++ b/arch/x86/platform/intel-mid/Makefile
@@ -1,7 +1,2 @@
# SPDX-License-Identifier: GPL-2.0-only
-obj-$(CONFIG_X86_INTEL_MID) += intel-mid.o intel_mid_vrtc.o pwr.o
-
-# SFI specific code
-ifdef CONFIG_X86_INTEL_MID
-obj-$(CONFIG_SFI) += sfi.o device_libs/
-endif
+obj-$(CONFIG_X86_INTEL_MID) += intel-mid.o pwr.o
diff --git a/arch/x86/platform/intel-mid/device_libs/Makefile b/arch/x86/platform/intel-mid/device_libs/Makefile
deleted file mode 100644
index 918edac9ab9a..000000000000
--- a/arch/x86/platform/intel-mid/device_libs/Makefile
+++ /dev/null
@@ -1,32 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-# Family-Level Interface Shim (FLIS)
-obj-$(subst m,y,$(CONFIG_PINCTRL_MERRIFIELD)) += platform_mrfld_pinctrl.o
-# SDHCI Devices
-obj-$(subst m,y,$(CONFIG_MMC_SDHCI_PCI)) += platform_mrfld_sd.o
-# WiFi + BT
-obj-$(subst m,y,$(CONFIG_BRCMFMAC_SDIO)) += platform_bcm43xx.o
-obj-$(subst m,y,$(CONFIG_BT_HCIUART_BCM)) += platform_bt.o
-# IPC Devices
-obj-$(subst m,y,$(CONFIG_MFD_INTEL_MSIC)) += platform_msic.o
-obj-$(subst m,y,$(CONFIG_SND_MFLD_MACHINE)) += platform_msic_audio.o
-obj-$(subst m,y,$(CONFIG_GPIO_MSIC)) += platform_msic_gpio.o
-obj-$(subst m,y,$(CONFIG_MFD_INTEL_MSIC)) += platform_msic_ocd.o
-obj-$(subst m,y,$(CONFIG_MFD_INTEL_MSIC)) += platform_msic_battery.o
-obj-$(subst m,y,$(CONFIG_INTEL_MID_POWER_BUTTON)) += platform_msic_power_btn.o
-obj-$(subst m,y,$(CONFIG_INTEL_MFLD_THERMAL)) += platform_msic_thermal.o
-# SPI Devices
-obj-$(subst m,y,$(CONFIG_SPI_SPIDEV)) += platform_mrfld_spidev.o
-# I2C Devices
-obj-$(subst m,y,$(CONFIG_SENSORS_EMC1403)) += platform_emc1403.o
-obj-$(subst m,y,$(CONFIG_SENSORS_LIS3LV02D)) += platform_lis331.o
-obj-$(subst m,y,$(CONFIG_MPU3050_I2C)) += platform_mpu3050.o
-obj-$(subst m,y,$(CONFIG_INPUT_BMA150)) += platform_bma023.o
-obj-$(subst m,y,$(CONFIG_DRM_MEDFIELD)) += platform_tc35876x.o
-# I2C GPIO Expanders
-obj-$(subst m,y,$(CONFIG_GPIO_PCA953X)) += platform_max7315.o
-obj-$(subst m,y,$(CONFIG_GPIO_PCA953X)) += platform_pcal9555a.o
-obj-$(subst m,y,$(CONFIG_GPIO_PCA953X)) += platform_tca6416.o
-# MISC Devices
-obj-$(subst m,y,$(CONFIG_KEYBOARD_GPIO)) += platform_gpio_keys.o
-obj-$(subst m,y,$(CONFIG_INTEL_MID_POWER_BUTTON)) += platform_mrfld_power_btn.o
-obj-$(subst m,y,$(CONFIG_RTC_DRV_CMOS)) += platform_mrfld_rtc.o
diff --git a/arch/x86/platform/intel-mid/device_libs/platform_bcm43xx.c b/arch/x86/platform/intel-mid/device_libs/platform_bcm43xx.c
deleted file mode 100644
index 564c47c53f3a..000000000000
--- a/arch/x86/platform/intel-mid/device_libs/platform_bcm43xx.c
+++ /dev/null
@@ -1,101 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * platform_bcm43xx.c: bcm43xx platform data initialization file
- *
- * (C) Copyright 2016 Intel Corporation
- * Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
- */
-
-#include <linux/gpio/machine.h>
-#include <linux/platform_device.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/fixed.h>
-#include <linux/sfi.h>
-
-#include <asm/intel-mid.h>
-
-#define WLAN_SFI_GPIO_IRQ_NAME "WLAN-interrupt"
-#define WLAN_SFI_GPIO_ENABLE_NAME "WLAN-enable"
-
-#define WLAN_DEV_NAME "0000:00:01.3"
-
-static struct regulator_consumer_supply bcm43xx_vmmc_supply = {
- .dev_name = WLAN_DEV_NAME,
- .supply = "vmmc",
-};
-
-static struct regulator_init_data bcm43xx_vmmc_data = {
- .constraints = {
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = 1,
- .consumer_supplies = &bcm43xx_vmmc_supply,
-};
-
-static struct fixed_voltage_config bcm43xx_vmmc = {
- .supply_name = "bcm43xx-vmmc-regulator",
- /*
- * Announce 2.0V here to be compatible with SDIO specification. The
- * real voltage and signaling are still 1.8V.
- */
- .microvolts = 2000000, /* 1.8V */
- .startup_delay = 250 * 1000, /* 250ms */
- .enabled_at_boot = 0, /* disabled at boot */
- .init_data = &bcm43xx_vmmc_data,
-};
-
-static struct platform_device bcm43xx_vmmc_regulator = {
- .name = "reg-fixed-voltage",
- .id = PLATFORM_DEVID_AUTO,
- .dev = {
- .platform_data = &bcm43xx_vmmc,
- },
-};
-
-static struct gpiod_lookup_table bcm43xx_vmmc_gpio_table = {
- .dev_id = "reg-fixed-voltage.0",
- .table = {
- GPIO_LOOKUP("0000:00:0c.0", -1, NULL, GPIO_ACTIVE_LOW),
- {}
- },
-};
-
-static int __init bcm43xx_regulator_register(void)
-{
- struct gpiod_lookup_table *table = &bcm43xx_vmmc_gpio_table;
- struct gpiod_lookup *lookup = table->table;
- int ret;
-
- lookup[0].chip_hwnum = get_gpio_by_name(WLAN_SFI_GPIO_ENABLE_NAME);
- gpiod_add_lookup_table(table);
-
- ret = platform_device_register(&bcm43xx_vmmc_regulator);
- if (ret) {
- pr_err("%s: vmmc regulator register failed\n", __func__);
- return ret;
- }
-
- return 0;
-}
-
-static void __init *bcm43xx_platform_data(void *info)
-{
- int ret;
-
- ret = bcm43xx_regulator_register();
- if (ret)
- return NULL;
-
- pr_info("Using generic wifi platform data\n");
-
- /* For now it's empty */
- return NULL;
-}
-
-static const struct devs_id bcm43xx_clk_vmmc_dev_id __initconst = {
- .name = "bcm43xx_clk_vmmc",
- .type = SFI_DEV_TYPE_SD,
- .get_platform_data = &bcm43xx_platform_data,
-};
-
-sfi_device(bcm43xx_clk_vmmc_dev_id);
diff --git a/arch/x86/platform/intel-mid/device_libs/platform_bma023.c b/arch/x86/platform/intel-mid/device_libs/platform_bma023.c
deleted file mode 100644
index 32912a17f68e..000000000000
--- a/arch/x86/platform/intel-mid/device_libs/platform_bma023.c
+++ /dev/null
@@ -1,16 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * platform_bma023.c: bma023 platform data initialization file
- *
- * (C) Copyright 2013 Intel Corporation
- */
-
-#include <asm/intel-mid.h>
-
-static const struct devs_id bma023_dev_id __initconst = {
- .name = "bma023",
- .type = SFI_DEV_TYPE_I2C,
- .delay = 1,
-};
-
-sfi_device(bma023_dev_id);
diff --git a/arch/x86/platform/intel-mid/device_libs/platform_bt.c b/arch/x86/platform/intel-mid/device_libs/platform_bt.c
deleted file mode 100644
index 2930b6e9473e..000000000000
--- a/arch/x86/platform/intel-mid/device_libs/platform_bt.c
+++ /dev/null
@@ -1,101 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Bluetooth platform data initialization file
- *
- * (C) Copyright 2017 Intel Corporation
- * Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
- */
-
-#include <linux/gpio/machine.h>
-#include <linux/pci.h>
-#include <linux/platform_device.h>
-
-#include <asm/cpu_device_id.h>
-#include <asm/intel-family.h>
-#include <asm/intel-mid.h>
-
-struct bt_sfi_data {
- struct device *dev;
- const char *name;
- int (*setup)(struct bt_sfi_data *ddata);
-};
-
-static struct gpiod_lookup_table tng_bt_sfi_gpio_table = {
- .dev_id = "hci_bcm",
- .table = {
- GPIO_LOOKUP("0000:00:0c.0", -1, "device-wakeup", GPIO_ACTIVE_HIGH),
- GPIO_LOOKUP("0000:00:0c.0", -1, "shutdown", GPIO_ACTIVE_HIGH),
- GPIO_LOOKUP("0000:00:0c.0", -1, "host-wakeup", GPIO_ACTIVE_HIGH),
- { },
- },
-};
-
-#define TNG_BT_SFI_GPIO_DEVICE_WAKEUP "bt_wakeup"
-#define TNG_BT_SFI_GPIO_SHUTDOWN "BT-reset"
-#define TNG_BT_SFI_GPIO_HOST_WAKEUP "bt_uart_enable"
-
-static int __init tng_bt_sfi_setup(struct bt_sfi_data *ddata)
-{
- struct gpiod_lookup_table *table = &tng_bt_sfi_gpio_table;
- struct gpiod_lookup *lookup = table->table;
- struct pci_dev *pdev;
-
- /* Connected to /dev/ttyS0 */
- pdev = pci_get_domain_bus_and_slot(0, 0, PCI_DEVFN(4, 1));
- if (!pdev)
- return -ENODEV;
-
- ddata->dev = &pdev->dev;
- ddata->name = table->dev_id;
-
- lookup[0].chip_hwnum = get_gpio_by_name(TNG_BT_SFI_GPIO_DEVICE_WAKEUP);
- lookup[1].chip_hwnum = get_gpio_by_name(TNG_BT_SFI_GPIO_SHUTDOWN);
- lookup[2].chip_hwnum = get_gpio_by_name(TNG_BT_SFI_GPIO_HOST_WAKEUP);
-
- gpiod_add_lookup_table(table);
- return 0;
-}
-
-static struct bt_sfi_data tng_bt_sfi_data __initdata = {
- .setup = tng_bt_sfi_setup,
-};
-
-static const struct x86_cpu_id bt_sfi_cpu_ids[] = {
- X86_MATCH_INTEL_FAM6_MODEL(ATOM_SILVERMONT_MID, &tng_bt_sfi_data),
- {}
-};
-
-static int __init bt_sfi_init(void)
-{
- struct platform_device_info info;
- struct platform_device *pdev;
- const struct x86_cpu_id *id;
- struct bt_sfi_data *ddata;
- int ret;
-
- id = x86_match_cpu(bt_sfi_cpu_ids);
- if (!id)
- return -ENODEV;
-
- ddata = (struct bt_sfi_data *)id->driver_data;
- if (!ddata)
- return -ENODEV;
-
- ret = ddata->setup(ddata);
- if (ret)
- return ret;
-
- memset(&info, 0, sizeof(info));
- info.fwnode = ddata->dev->fwnode;
- info.parent = ddata->dev;
- info.name = ddata->name;
- info.id = PLATFORM_DEVID_NONE;
-
- pdev = platform_device_register_full(&info);
- if (IS_ERR(pdev))
- return PTR_ERR(pdev);
-
- dev_info(ddata->dev, "Registered Bluetooth device: %s\n", ddata->name);
- return 0;
-}
-device_initcall(bt_sfi_init);
diff --git a/arch/x86/platform/intel-mid/device_libs/platform_emc1403.c b/arch/x86/platform/intel-mid/device_libs/platform_emc1403.c
deleted file mode 100644
index a2508582a0b1..000000000000
--- a/arch/x86/platform/intel-mid/device_libs/platform_emc1403.c
+++ /dev/null
@@ -1,39 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * platform_emc1403.c: emc1403 platform data initialization file
- *
- * (C) Copyright 2013 Intel Corporation
- * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
- */
-
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/i2c.h>
-#include <asm/intel-mid.h>
-
-static void __init *emc1403_platform_data(void *info)
-{
- static short intr2nd_pdata;
- struct i2c_board_info *i2c_info = info;
- int intr = get_gpio_by_name("thermal_int");
- int intr2nd = get_gpio_by_name("thermal_alert");
-
- if (intr < 0)
- return NULL;
- if (intr2nd < 0)
- return NULL;
-
- i2c_info->irq = intr + INTEL_MID_IRQ_OFFSET;
- intr2nd_pdata = intr2nd + INTEL_MID_IRQ_OFFSET;
-
- return &intr2nd_pdata;
-}
-
-static const struct devs_id emc1403_dev_id __initconst = {
- .name = "emc1403",
- .type = SFI_DEV_TYPE_I2C,
- .delay = 1,
- .get_platform_data = &emc1403_platform_data,
-};
-
-sfi_device(emc1403_dev_id);
diff --git a/arch/x86/platform/intel-mid/device_libs/platform_gpio_keys.c b/arch/x86/platform/intel-mid/device_libs/platform_gpio_keys.c
deleted file mode 100644
index d9435d2196a4..000000000000
--- a/arch/x86/platform/intel-mid/device_libs/platform_gpio_keys.c
+++ /dev/null
@@ -1,81 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * platform_gpio_keys.c: gpio_keys platform data initialization file
- *
- * (C) Copyright 2013 Intel Corporation
- * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
- */
-
-#include <linux/input.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/gpio.h>
-#include <linux/gpio_keys.h>
-#include <linux/platform_device.h>
-#include <asm/intel-mid.h>
-
-#define DEVICE_NAME "gpio-keys"
-
-/*
- * we will search these buttons in SFI GPIO table (by name)
- * and register them dynamically. Please add all possible
- * buttons here, we will shrink them if no GPIO found.
- */
-static struct gpio_keys_button gpio_button[] = {
- {KEY_POWER, -1, 1, "power_btn", EV_KEY, 0, 3000},
- {KEY_PROG1, -1, 1, "prog_btn1", EV_KEY, 0, 20},
- {KEY_PROG2, -1, 1, "prog_btn2", EV_KEY, 0, 20},
- {SW_LID, -1, 1, "lid_switch", EV_SW, 0, 20},
- {KEY_VOLUMEUP, -1, 1, "vol_up", EV_KEY, 0, 20},
- {KEY_VOLUMEDOWN, -1, 1, "vol_down", EV_KEY, 0, 20},
- {KEY_MUTE, -1, 1, "mute_enable", EV_KEY, 0, 20},
- {KEY_VOLUMEUP, -1, 1, "volume_up", EV_KEY, 0, 20},
- {KEY_VOLUMEDOWN, -1, 1, "volume_down", EV_KEY, 0, 20},
- {KEY_CAMERA, -1, 1, "camera_full", EV_KEY, 0, 20},
- {KEY_CAMERA_FOCUS, -1, 1, "camera_half", EV_KEY, 0, 20},
- {SW_KEYPAD_SLIDE, -1, 1, "MagSw1", EV_SW, 0, 20},
- {SW_KEYPAD_SLIDE, -1, 1, "MagSw2", EV_SW, 0, 20},
-};
-
-static struct gpio_keys_platform_data gpio_keys = {
- .buttons = gpio_button,
- .rep = 1,
- .nbuttons = -1, /* will fill it after search */
-};
-
-static struct platform_device pb_device = {
- .name = DEVICE_NAME,
- .id = -1,
- .dev = {
- .platform_data = &gpio_keys,
- },
-};
-
-/*
- * Shrink the non-existent buttons, register the gpio button
- * device if there is some
- */
-static int __init pb_keys_init(void)
-{
- struct gpio_keys_button *gb = gpio_button;
- int i, good = 0;
-
- for (i = 0; i < ARRAY_SIZE(gpio_button); i++) {
- gb[i].gpio = get_gpio_by_name(gb[i].desc);
- pr_debug("info[%2d]: name = %s, gpio = %d\n", i, gb[i].desc,
- gb[i].gpio);
- if (gb[i].gpio < 0)
- continue;
-
- if (i != good)
- gb[good] = gb[i];
- good++;
- }
-
- if (good) {
- gpio_keys.nbuttons = good;
- return platform_device_register(&pb_device);
- }
- return 0;
-}
-late_initcall(pb_keys_init);
diff --git a/arch/x86/platform/intel-mid/device_libs/platform_lis331.c b/arch/x86/platform/intel-mid/device_libs/platform_lis331.c
deleted file mode 100644
index a4485cd638c6..000000000000
--- a/arch/x86/platform/intel-mid/device_libs/platform_lis331.c
+++ /dev/null
@@ -1,37 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * platform_lis331.c: lis331 platform data initialization file
- *
- * (C) Copyright 2013 Intel Corporation
- * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
- */
-
-#include <linux/i2c.h>
-#include <linux/gpio.h>
-#include <asm/intel-mid.h>
-
-static void __init *lis331dl_platform_data(void *info)
-{
- static short intr2nd_pdata;
- struct i2c_board_info *i2c_info = info;
- int intr = get_gpio_by_name("accel_int");
- int intr2nd = get_gpio_by_name("accel_2");
-
- if (intr < 0)
- return NULL;
- if (intr2nd < 0)
- return NULL;
-
- i2c_info->irq = intr + INTEL_MID_IRQ_OFFSET;
- intr2nd_pdata = intr2nd + INTEL_MID_IRQ_OFFSET;
-
- return &intr2nd_pdata;
-}
-
-static const struct devs_id lis331dl_dev_id __initconst = {
- .name = "i2c_accel",
- .type = SFI_DEV_TYPE_I2C,
- .get_platform_data = &lis331dl_platform_data,
-};
-
-sfi_device(lis331dl_dev_id);
diff --git a/arch/x86/platform/intel-mid/device_libs/platform_max7315.c b/arch/x86/platform/intel-mid/device_libs/platform_max7315.c
deleted file mode 100644
index e9287c3184da..000000000000
--- a/arch/x86/platform/intel-mid/device_libs/platform_max7315.c
+++ /dev/null
@@ -1,77 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * platform_max7315.c: max7315 platform data initialization file
- *
- * (C) Copyright 2013 Intel Corporation
- * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
- */
-
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/i2c.h>
-#include <linux/platform_data/pca953x.h>
-#include <asm/intel-mid.h>
-
-#define MAX7315_NUM 2
-
-static void __init *max7315_platform_data(void *info)
-{
- static struct pca953x_platform_data max7315_pdata[MAX7315_NUM];
- static int nr;
- struct pca953x_platform_data *max7315 = &max7315_pdata[nr];
- struct i2c_board_info *i2c_info = info;
- int gpio_base, intr;
- char base_pin_name[SFI_NAME_LEN + 1];
- char intr_pin_name[SFI_NAME_LEN + 1];
-
- if (nr == MAX7315_NUM) {
- pr_err("too many max7315s, we only support %d\n",
- MAX7315_NUM);
- return NULL;
- }
- /* we have several max7315 on the board, we only need load several
- * instances of the same pca953x driver to cover them
- */
- strcpy(i2c_info->type, "max7315");
- if (nr++) {
- snprintf(base_pin_name, sizeof(base_pin_name),
- "max7315_%d_base", nr);
- snprintf(intr_pin_name, sizeof(intr_pin_name),
- "max7315_%d_int", nr);
- } else {
- strcpy(base_pin_name, "max7315_base");
- strcpy(intr_pin_name, "max7315_int");
- }
-
- gpio_base = get_gpio_by_name(base_pin_name);
- intr = get_gpio_by_name(intr_pin_name);
-
- if (gpio_base < 0)
- return NULL;
- max7315->gpio_base = gpio_base;
- if (intr != -1) {
- i2c_info->irq = intr + INTEL_MID_IRQ_OFFSET;
- max7315->irq_base = gpio_base + INTEL_MID_IRQ_OFFSET;
- } else {
- i2c_info->irq = -1;
- max7315->irq_base = -1;
- }
- return max7315;
-}
-
-static const struct devs_id max7315_dev_id __initconst = {
- .name = "i2c_max7315",
- .type = SFI_DEV_TYPE_I2C,
- .delay = 1,
- .get_platform_data = &max7315_platform_data,
-};
-
-static const struct devs_id max7315_2_dev_id __initconst = {
- .name = "i2c_max7315_2",
- .type = SFI_DEV_TYPE_I2C,
- .delay = 1,
- .get_platform_data = &max7315_platform_data,
-};
-
-sfi_device(max7315_dev_id);
-sfi_device(max7315_2_dev_id);
diff --git a/arch/x86/platform/intel-mid/device_libs/platform_mpu3050.c b/arch/x86/platform/intel-mid/device_libs/platform_mpu3050.c
deleted file mode 100644
index 28a182713934..000000000000
--- a/arch/x86/platform/intel-mid/device_libs/platform_mpu3050.c
+++ /dev/null
@@ -1,32 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * platform_mpu3050.c: mpu3050 platform data initialization file
- *
- * (C) Copyright 2013 Intel Corporation
- * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
- */
-
-#include <linux/gpio.h>
-#include <linux/i2c.h>
-#include <asm/intel-mid.h>
-
-static void *mpu3050_platform_data(void *info)
-{
- struct i2c_board_info *i2c_info = info;
- int intr = get_gpio_by_name("mpu3050_int");
-
- if (intr < 0)
- return NULL;
-
- i2c_info->irq = intr + INTEL_MID_IRQ_OFFSET;
- return NULL;
-}
-
-static const struct devs_id mpu3050_dev_id __initconst = {
- .name = "mpu3050",
- .type = SFI_DEV_TYPE_I2C,
- .delay = 1,
- .get_platform_data = &mpu3050_platform_data,
-};
-
-sfi_device(mpu3050_dev_id);
diff --git a/arch/x86/platform/intel-mid/device_libs/platform_mrfld_pinctrl.c b/arch/x86/platform/intel-mid/device_libs/platform_mrfld_pinctrl.c
deleted file mode 100644
index 605e1f94ad89..000000000000
--- a/arch/x86/platform/intel-mid/device_libs/platform_mrfld_pinctrl.c
+++ /dev/null
@@ -1,39 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Intel Merrifield FLIS platform device initialization file
- *
- * Copyright (C) 2016, Intel Corporation
- *
- * Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
- */
-
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/platform_device.h>
-
-#include <asm/intel-mid.h>
-
-#define FLIS_BASE_ADDR 0xff0c0000
-#define FLIS_LENGTH 0x8000
-
-static struct resource mrfld_pinctrl_mmio_resource = {
- .start = FLIS_BASE_ADDR,
- .end = FLIS_BASE_ADDR + FLIS_LENGTH - 1,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device mrfld_pinctrl_device = {
- .name = "pinctrl-merrifield",
- .id = PLATFORM_DEVID_NONE,
- .resource = &mrfld_pinctrl_mmio_resource,
- .num_resources = 1,
-};
-
-static int __init mrfld_pinctrl_init(void)
-{
- if (intel_mid_identify_cpu() == INTEL_MID_CPU_CHIP_TANGIER)
- return platform_device_register(&mrfld_pinctrl_device);
-
- return -ENODEV;
-}
-arch_initcall(mrfld_pinctrl_init);
diff --git a/arch/x86/platform/intel-mid/device_libs/platform_mrfld_power_btn.c b/arch/x86/platform/intel-mid/device_libs/platform_mrfld_power_btn.c
deleted file mode 100644
index ec2afb41b34a..000000000000
--- a/arch/x86/platform/intel-mid/device_libs/platform_mrfld_power_btn.c
+++ /dev/null
@@ -1,78 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Intel Merrifield power button support
- *
- * (C) Copyright 2017 Intel Corporation
- *
- * Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
- */
-
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/platform_device.h>
-#include <linux/sfi.h>
-
-#include <asm/intel-mid.h>
-#include <asm/intel_scu_ipc.h>
-
-static struct resource mrfld_power_btn_resources[] = {
- {
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device mrfld_power_btn_dev = {
- .name = "msic_power_btn",
- .id = PLATFORM_DEVID_NONE,
- .num_resources = ARRAY_SIZE(mrfld_power_btn_resources),
- .resource = mrfld_power_btn_resources,
-};
-
-static int mrfld_power_btn_scu_status_change(struct notifier_block *nb,
- unsigned long code, void *data)
-{
- if (code == SCU_DOWN) {
- platform_device_unregister(&mrfld_power_btn_dev);
- return 0;
- }
-
- return platform_device_register(&mrfld_power_btn_dev);
-}
-
-static struct notifier_block mrfld_power_btn_scu_notifier = {
- .notifier_call = mrfld_power_btn_scu_status_change,
-};
-
-static int __init register_mrfld_power_btn(void)
-{
- if (intel_mid_identify_cpu() != INTEL_MID_CPU_CHIP_TANGIER)
- return -ENODEV;
-
- /*
- * We need to be sure that the SCU IPC is ready before
- * PMIC power button device can be registered:
- */
- intel_scu_notifier_add(&mrfld_power_btn_scu_notifier);
-
- return 0;
-}
-arch_initcall(register_mrfld_power_btn);
-
-static void __init *mrfld_power_btn_platform_data(void *info)
-{
- struct resource *res = mrfld_power_btn_resources;
- struct sfi_device_table_entry *pentry = info;
-
- res->start = res->end = pentry->irq;
- return NULL;
-}
-
-static const struct devs_id mrfld_power_btn_dev_id __initconst = {
- .name = "bcove_power_btn",
- .type = SFI_DEV_TYPE_IPC,
- .delay = 1,
- .msic = 1,
- .get_platform_data = &mrfld_power_btn_platform_data,
-};
-
-sfi_device(mrfld_power_btn_dev_id);
diff --git a/arch/x86/platform/intel-mid/device_libs/platform_mrfld_rtc.c b/arch/x86/platform/intel-mid/device_libs/platform_mrfld_rtc.c
deleted file mode 100644
index 40e9808a9634..000000000000
--- a/arch/x86/platform/intel-mid/device_libs/platform_mrfld_rtc.c
+++ /dev/null
@@ -1,44 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Intel Merrifield legacy RTC initialization file
- *
- * (C) Copyright 2017 Intel Corporation
- *
- * Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
- */
-
-#include <linux/init.h>
-
-#include <asm/hw_irq.h>
-#include <asm/intel-mid.h>
-#include <asm/io_apic.h>
-#include <asm/time.h>
-#include <asm/x86_init.h>
-
-static int __init mrfld_legacy_rtc_alloc_irq(void)
-{
- struct irq_alloc_info info;
- int ret;
-
- if (!x86_platform.legacy.rtc)
- return -ENODEV;
-
- ioapic_set_alloc_attr(&info, NUMA_NO_NODE, 1, 0);
- ret = mp_map_gsi_to_irq(RTC_IRQ, IOAPIC_MAP_ALLOC, &info);
- if (ret < 0) {
- pr_info("Failed to allocate RTC interrupt. Disabling RTC\n");
- x86_platform.legacy.rtc = 0;
- return ret;
- }
-
- return 0;
-}
-
-static int __init mrfld_legacy_rtc_init(void)
-{
- if (intel_mid_identify_cpu() != INTEL_MID_CPU_CHIP_TANGIER)
- return -ENODEV;
-
- return mrfld_legacy_rtc_alloc_irq();
-}
-arch_initcall(mrfld_legacy_rtc_init);
diff --git a/arch/x86/platform/intel-mid/device_libs/platform_mrfld_sd.c b/arch/x86/platform/intel-mid/device_libs/platform_mrfld_sd.c
deleted file mode 100644
index fe3b7ff975f3..000000000000
--- a/arch/x86/platform/intel-mid/device_libs/platform_mrfld_sd.c
+++ /dev/null
@@ -1,43 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * SDHCI platform data initilisation file
- *
- * (C) Copyright 2016 Intel Corporation
- * Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
- */
-
-#include <linux/init.h>
-#include <linux/pci.h>
-
-#include <linux/mmc/sdhci-pci-data.h>
-
-#include <asm/intel-mid.h>
-
-#define INTEL_MRFLD_SD 2
-#define INTEL_MRFLD_SD_CD_GPIO 77
-
-static struct sdhci_pci_data mrfld_sdhci_pci_data = {
- .rst_n_gpio = -EINVAL,
- .cd_gpio = INTEL_MRFLD_SD_CD_GPIO,
-};
-
-static struct sdhci_pci_data *
-mrfld_sdhci_pci_get_data(struct pci_dev *pdev, int slotno)
-{
- unsigned int func = PCI_FUNC(pdev->devfn);
-
- if (func == INTEL_MRFLD_SD)
- return &mrfld_sdhci_pci_data;
-
- return NULL;
-}
-
-static int __init mrfld_sd_init(void)
-{
- if (intel_mid_identify_cpu() != INTEL_MID_CPU_CHIP_TANGIER)
- return -ENODEV;
-
- sdhci_pci_get_data = mrfld_sdhci_pci_get_data;
- return 0;
-}
-arch_initcall(mrfld_sd_init);
diff --git a/arch/x86/platform/intel-mid/device_libs/platform_mrfld_spidev.c b/arch/x86/platform/intel-mid/device_libs/platform_mrfld_spidev.c
deleted file mode 100644
index b828f4fd40be..000000000000
--- a/arch/x86/platform/intel-mid/device_libs/platform_mrfld_spidev.c
+++ /dev/null
@@ -1,50 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * spidev platform data initialization file
- *
- * (C) Copyright 2014, 2016 Intel Corporation
- * Authors: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
- * Dan O'Donovan <dan@emutex.com>
- */
-
-#include <linux/err.h>
-#include <linux/init.h>
-#include <linux/sfi.h>
-#include <linux/spi/pxa2xx_spi.h>
-#include <linux/spi/spi.h>
-
-#include <asm/intel-mid.h>
-
-#define MRFLD_SPI_DEFAULT_DMA_BURST 8
-#define MRFLD_SPI_DEFAULT_TIMEOUT 500
-
-/* GPIO pin for spidev chipselect */
-#define MRFLD_SPIDEV_GPIO_CS 111
-
-static struct pxa2xx_spi_chip spidev_spi_chip = {
- .dma_burst_size = MRFLD_SPI_DEFAULT_DMA_BURST,
- .timeout = MRFLD_SPI_DEFAULT_TIMEOUT,
- .gpio_cs = MRFLD_SPIDEV_GPIO_CS,
-};
-
-static void __init *spidev_platform_data(void *info)
-{
- struct spi_board_info *spi_info = info;
-
- if (intel_mid_identify_cpu() != INTEL_MID_CPU_CHIP_TANGIER)
- return ERR_PTR(-ENODEV);
-
- spi_info->mode = SPI_MODE_0;
- spi_info->controller_data = &spidev_spi_chip;
-
- return NULL;
-}
-
-static const struct devs_id spidev_dev_id __initconst = {
- .name = "spidev",
- .type = SFI_DEV_TYPE_SPI,
- .delay = 0,
- .get_platform_data = &spidev_platform_data,
-};
-
-sfi_device(spidev_dev_id);
diff --git a/arch/x86/platform/intel-mid/device_libs/platform_msic.c b/arch/x86/platform/intel-mid/device_libs/platform_msic.c
deleted file mode 100644
index b17783d0d4e7..000000000000
--- a/arch/x86/platform/intel-mid/device_libs/platform_msic.c
+++ /dev/null
@@ -1,83 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * platform_msic.c: MSIC platform data initialization file
- *
- * (C) Copyright 2013 Intel Corporation
- * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
- */
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/scatterlist.h>
-#include <linux/init.h>
-#include <linux/sfi.h>
-#include <linux/mfd/intel_msic.h>
-#include <asm/intel_scu_ipc.h>
-#include <asm/intel-mid.h>
-#include "platform_msic.h"
-
-struct intel_msic_platform_data msic_pdata;
-
-static struct resource msic_resources[] = {
- {
- .start = INTEL_MSIC_IRQ_PHYS_BASE,
- .end = INTEL_MSIC_IRQ_PHYS_BASE + 64 - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device msic_device = {
- .name = "intel_msic",
- .id = -1,
- .dev = {
- .platform_data = &msic_pdata,
- },
- .num_resources = ARRAY_SIZE(msic_resources),
- .resource = msic_resources,
-};
-
-static int msic_scu_status_change(struct notifier_block *nb,
- unsigned long code, void *data)
-{
- if (code == SCU_DOWN) {
- platform_device_unregister(&msic_device);
- return 0;
- }
-
- return platform_device_register(&msic_device);
-}
-
-static int __init msic_init(void)
-{
- static struct notifier_block msic_scu_notifier = {
- .notifier_call = msic_scu_status_change,
- };
-
- /*
- * We need to be sure that the SCU IPC is ready before MSIC device
- * can be registered.
- */
- if (intel_mid_has_msic())
- intel_scu_notifier_add(&msic_scu_notifier);
-
- return 0;
-}
-arch_initcall(msic_init);
-
-/*
- * msic_generic_platform_data - sets generic platform data for the block
- * @info: pointer to the SFI device table entry for this block
- * @block: MSIC block
- *
- * Function sets IRQ number from the SFI table entry for given device to
- * the MSIC platform data.
- */
-void *msic_generic_platform_data(void *info, enum intel_msic_block block)
-{
- struct sfi_device_table_entry *entry = info;
-
- BUG_ON(block < 0 || block >= INTEL_MSIC_BLOCK_LAST);
- msic_pdata.irq[block] = entry->irq;
-
- return NULL;
-}
diff --git a/arch/x86/platform/intel-mid/device_libs/platform_msic.h b/arch/x86/platform/intel-mid/device_libs/platform_msic.h
deleted file mode 100644
index 91deb2e65b0e..000000000000
--- a/arch/x86/platform/intel-mid/device_libs/platform_msic.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * platform_msic.h: MSIC platform data header file
- *
- * (C) Copyright 2013 Intel Corporation
- * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
- */
-#ifndef _PLATFORM_MSIC_H_
-#define _PLATFORM_MSIC_H_
-
-extern struct intel_msic_platform_data msic_pdata;
-
-void *msic_generic_platform_data(void *info, enum intel_msic_block block);
-
-#endif
diff --git a/arch/x86/platform/intel-mid/device_libs/platform_msic_audio.c b/arch/x86/platform/intel-mid/device_libs/platform_msic_audio.c
deleted file mode 100644
index e765da78ad8c..000000000000
--- a/arch/x86/platform/intel-mid/device_libs/platform_msic_audio.c
+++ /dev/null
@@ -1,42 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * platform_msic_audio.c: MSIC audio platform data initialization file
- *
- * (C) Copyright 2013 Intel Corporation
- * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
- */
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/scatterlist.h>
-#include <linux/init.h>
-#include <linux/sfi.h>
-#include <linux/platform_device.h>
-#include <linux/mfd/intel_msic.h>
-#include <asm/intel-mid.h>
-
-#include "platform_msic.h"
-
-static void *msic_audio_platform_data(void *info)
-{
- struct platform_device *pdev;
-
- pdev = platform_device_register_simple("sst-platform", -1, NULL, 0);
-
- if (IS_ERR(pdev)) {
- pr_err("failed to create audio platform device\n");
- return NULL;
- }
-
- return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_AUDIO);
-}
-
-static const struct devs_id msic_audio_dev_id __initconst = {
- .name = "msic_audio",
- .type = SFI_DEV_TYPE_IPC,
- .delay = 1,
- .msic = 1,
- .get_platform_data = &msic_audio_platform_data,
-};
-
-sfi_device(msic_audio_dev_id);
diff --git a/arch/x86/platform/intel-mid/device_libs/platform_msic_battery.c b/arch/x86/platform/intel-mid/device_libs/platform_msic_battery.c
deleted file mode 100644
index f461f84903f8..000000000000
--- a/arch/x86/platform/intel-mid/device_libs/platform_msic_battery.c
+++ /dev/null
@@ -1,32 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * platform_msic_battery.c: MSIC battery platform data initialization file
- *
- * (C) Copyright 2013 Intel Corporation
- * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
- */
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/scatterlist.h>
-#include <linux/init.h>
-#include <linux/sfi.h>
-#include <linux/mfd/intel_msic.h>
-#include <asm/intel-mid.h>
-
-#include "platform_msic.h"
-
-static void __init *msic_battery_platform_data(void *info)
-{
- return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_BATTERY);
-}
-
-static const struct devs_id msic_battery_dev_id __initconst = {
- .name = "msic_battery",
- .type = SFI_DEV_TYPE_IPC,
- .delay = 1,
- .msic = 1,
- .get_platform_data = &msic_battery_platform_data,
-};
-
-sfi_device(msic_battery_dev_id);
diff --git a/arch/x86/platform/intel-mid/device_libs/platform_msic_gpio.c b/arch/x86/platform/intel-mid/device_libs/platform_msic_gpio.c
deleted file mode 100644
index 71a7d6db3878..000000000000
--- a/arch/x86/platform/intel-mid/device_libs/platform_msic_gpio.c
+++ /dev/null
@@ -1,43 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * platform_msic_gpio.c: MSIC GPIO platform data initialization file
- *
- * (C) Copyright 2013 Intel Corporation
- * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
- */
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/scatterlist.h>
-#include <linux/sfi.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/mfd/intel_msic.h>
-#include <asm/intel-mid.h>
-
-#include "platform_msic.h"
-
-static void __init *msic_gpio_platform_data(void *info)
-{
- static struct intel_msic_gpio_pdata msic_gpio_pdata;
-
- int gpio = get_gpio_by_name("msic_gpio_base");
-
- if (gpio < 0)
- return NULL;
-
- msic_gpio_pdata.gpio_base = gpio;
- msic_pdata.gpio = &msic_gpio_pdata;
-
- return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_GPIO);
-}
-
-static const struct devs_id msic_gpio_dev_id __initconst = {
- .name = "msic_gpio",
- .type = SFI_DEV_TYPE_IPC,
- .delay = 1,
- .msic = 1,
- .get_platform_data = &msic_gpio_platform_data,
-};
-
-sfi_device(msic_gpio_dev_id);
diff --git a/arch/x86/platform/intel-mid/device_libs/platform_msic_ocd.c b/arch/x86/platform/intel-mid/device_libs/platform_msic_ocd.c
deleted file mode 100644
index 558c0d974430..000000000000
--- a/arch/x86/platform/intel-mid/device_libs/platform_msic_ocd.c
+++ /dev/null
@@ -1,44 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * platform_msic_ocd.c: MSIC OCD platform data initialization file
- *
- * (C) Copyright 2013 Intel Corporation
- * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
- */
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/scatterlist.h>
-#include <linux/sfi.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/mfd/intel_msic.h>
-#include <asm/intel-mid.h>
-
-#include "platform_msic.h"
-
-static void __init *msic_ocd_platform_data(void *info)
-{
- static struct intel_msic_ocd_pdata msic_ocd_pdata;
- int gpio;
-
- gpio = get_gpio_by_name("ocd_gpio");
-
- if (gpio < 0)
- return NULL;
-
- msic_ocd_pdata.gpio = gpio;
- msic_pdata.ocd = &msic_ocd_pdata;
-
- return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_OCD);
-}
-
-static const struct devs_id msic_ocd_dev_id __initconst = {
- .name = "msic_ocd",
- .type = SFI_DEV_TYPE_IPC,
- .delay = 1,
- .msic = 1,
- .get_platform_data = &msic_ocd_platform_data,
-};
-
-sfi_device(msic_ocd_dev_id);
diff --git a/arch/x86/platform/intel-mid/device_libs/platform_msic_power_btn.c b/arch/x86/platform/intel-mid/device_libs/platform_msic_power_btn.c
deleted file mode 100644
index 3d3de2d59726..000000000000
--- a/arch/x86/platform/intel-mid/device_libs/platform_msic_power_btn.c
+++ /dev/null
@@ -1,31 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * platform_msic_power_btn.c: MSIC power btn platform data initialization file
- *
- * (C) Copyright 2013 Intel Corporation
- * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
- */
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/scatterlist.h>
-#include <linux/sfi.h>
-#include <linux/init.h>
-#include <linux/mfd/intel_msic.h>
-#include <asm/intel-mid.h>
-
-#include "platform_msic.h"
-
-static void __init *msic_power_btn_platform_data(void *info)
-{
- return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_POWER_BTN);
-}
-
-static const struct devs_id msic_power_btn_dev_id __initconst = {
- .name = "msic_power_btn",
- .type = SFI_DEV_TYPE_IPC,
- .delay = 1,
- .msic = 1,
- .get_platform_data = &msic_power_btn_platform_data,
-};
-
-sfi_device(msic_power_btn_dev_id);
diff --git a/arch/x86/platform/intel-mid/device_libs/platform_msic_thermal.c b/arch/x86/platform/intel-mid/device_libs/platform_msic_thermal.c
deleted file mode 100644
index 4858da1d78c6..000000000000
--- a/arch/x86/platform/intel-mid/device_libs/platform_msic_thermal.c
+++ /dev/null
@@ -1,32 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * platform_msic_thermal.c: msic_thermal platform data initialization file
- *
- * (C) Copyright 2013 Intel Corporation
- * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
- */
-
-#include <linux/input.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/mfd/intel_msic.h>
-#include <asm/intel-mid.h>
-
-#include "platform_msic.h"
-
-static void __init *msic_thermal_platform_data(void *info)
-{
- return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_THERMAL);
-}
-
-static const struct devs_id msic_thermal_dev_id __initconst = {
- .name = "msic_thermal",
- .type = SFI_DEV_TYPE_IPC,
- .delay = 1,
- .msic = 1,
- .get_platform_data = &msic_thermal_platform_data,
-};
-
-sfi_device(msic_thermal_dev_id);
diff --git a/arch/x86/platform/intel-mid/device_libs/platform_pcal9555a.c b/arch/x86/platform/intel-mid/device_libs/platform_pcal9555a.c
deleted file mode 100644
index 5609d8da3978..000000000000
--- a/arch/x86/platform/intel-mid/device_libs/platform_pcal9555a.c
+++ /dev/null
@@ -1,95 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * PCAL9555a platform data initialization file
- *
- * Copyright (C) 2016, Intel Corporation
- *
- * Authors: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
- * Dan O'Donovan <dan@emutex.com>
- */
-
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/i2c.h>
-#include <linux/platform_data/pca953x.h>
-#include <linux/sfi.h>
-
-#include <asm/intel-mid.h>
-
-#define PCAL9555A_NUM 4
-
-static struct pca953x_platform_data pcal9555a_pdata[PCAL9555A_NUM];
-static int nr;
-
-static void __init *pcal9555a_platform_data(void *info)
-{
- struct i2c_board_info *i2c_info = info;
- char *type = i2c_info->type;
- struct pca953x_platform_data *pcal9555a;
- char base_pin_name[SFI_NAME_LEN + 1];
- char intr_pin_name[SFI_NAME_LEN + 1];
- int gpio_base, intr;
-
- snprintf(base_pin_name, sizeof(base_pin_name), "%s_base", type);
- snprintf(intr_pin_name, sizeof(intr_pin_name), "%s_int", type);
-
- gpio_base = get_gpio_by_name(base_pin_name);
- intr = get_gpio_by_name(intr_pin_name);
-
- /* Check if the SFI record valid */
- if (gpio_base == -1)
- return NULL;
-
- if (nr >= PCAL9555A_NUM) {
- pr_err("%s: Too many instances, only %d supported\n", __func__,
- PCAL9555A_NUM);
- return NULL;
- }
-
- pcal9555a = &pcal9555a_pdata[nr++];
- pcal9555a->gpio_base = gpio_base;
-
- if (intr >= 0) {
- i2c_info->irq = intr + INTEL_MID_IRQ_OFFSET;
- pcal9555a->irq_base = gpio_base + INTEL_MID_IRQ_OFFSET;
- } else {
- i2c_info->irq = -1;
- pcal9555a->irq_base = -1;
- }
-
- strcpy(type, "pcal9555a");
- return pcal9555a;
-}
-
-static const struct devs_id pcal9555a_1_dev_id __initconst = {
- .name = "pcal9555a-1",
- .type = SFI_DEV_TYPE_I2C,
- .delay = 1,
- .get_platform_data = &pcal9555a_platform_data,
-};
-
-static const struct devs_id pcal9555a_2_dev_id __initconst = {
- .name = "pcal9555a-2",
- .type = SFI_DEV_TYPE_I2C,
- .delay = 1,
- .get_platform_data = &pcal9555a_platform_data,
-};
-
-static const struct devs_id pcal9555a_3_dev_id __initconst = {
- .name = "pcal9555a-3",
- .type = SFI_DEV_TYPE_I2C,
- .delay = 1,
- .get_platform_data = &pcal9555a_platform_data,
-};
-
-static const struct devs_id pcal9555a_4_dev_id __initconst = {
- .name = "pcal9555a-4",
- .type = SFI_DEV_TYPE_I2C,
- .delay = 1,
- .get_platform_data = &pcal9555a_platform_data,
-};
-
-sfi_device(pcal9555a_1_dev_id);
-sfi_device(pcal9555a_2_dev_id);
-sfi_device(pcal9555a_3_dev_id);
-sfi_device(pcal9555a_4_dev_id);
diff --git a/arch/x86/platform/intel-mid/device_libs/platform_tc35876x.c b/arch/x86/platform/intel-mid/device_libs/platform_tc35876x.c
deleted file mode 100644
index 139738bbdd36..000000000000
--- a/arch/x86/platform/intel-mid/device_libs/platform_tc35876x.c
+++ /dev/null
@@ -1,42 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * platform_tc35876x.c: tc35876x platform data initialization file
- *
- * (C) Copyright 2013 Intel Corporation
- * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
- */
-
-#include <linux/gpio/machine.h>
-#include <asm/intel-mid.h>
-
-static struct gpiod_lookup_table tc35876x_gpio_table = {
- .dev_id = "i2c_disp_brig",
- .table = {
- GPIO_LOOKUP("0000:00:0c.0", -1, "bridge-reset", GPIO_ACTIVE_HIGH),
- GPIO_LOOKUP("0000:00:0c.0", -1, "bl-en", GPIO_ACTIVE_HIGH),
- GPIO_LOOKUP("0000:00:0c.0", -1, "vadd", GPIO_ACTIVE_HIGH),
- { },
- },
-};
-
-/*tc35876x DSI_LVDS bridge chip and panel platform data*/
-static void *tc35876x_platform_data(void *data)
-{
- struct gpiod_lookup_table *table = &tc35876x_gpio_table;
- struct gpiod_lookup *lookup = table->table;
-
- lookup[0].chip_hwnum = get_gpio_by_name("LCMB_RXEN");
- lookup[1].chip_hwnum = get_gpio_by_name("6S6P_BL_EN");
- lookup[2].chip_hwnum = get_gpio_by_name("EN_VREG_LCD_V3P3");
- gpiod_add_lookup_table(table);
-
- return NULL;
-}
-
-static const struct devs_id tc35876x_dev_id __initconst = {
- .name = "i2c_disp_brig",
- .type = SFI_DEV_TYPE_I2C,
- .get_platform_data = &tc35876x_platform_data,
-};
-
-sfi_device(tc35876x_dev_id);
diff --git a/arch/x86/platform/intel-mid/device_libs/platform_tca6416.c b/arch/x86/platform/intel-mid/device_libs/platform_tca6416.c
deleted file mode 100644
index e689d8f61059..000000000000
--- a/arch/x86/platform/intel-mid/device_libs/platform_tca6416.c
+++ /dev/null
@@ -1,53 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * platform_tca6416.c: tca6416 platform data initialization file
- *
- * (C) Copyright 2013 Intel Corporation
- * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
- */
-
-#include <linux/platform_data/pca953x.h>
-#include <linux/i2c.h>
-#include <linux/gpio.h>
-#include <asm/intel-mid.h>
-
-#define TCA6416_NAME "tca6416"
-#define TCA6416_BASE "tca6416_base"
-#define TCA6416_INTR "tca6416_int"
-
-static void *tca6416_platform_data(void *info)
-{
- static struct pca953x_platform_data tca6416;
- struct i2c_board_info *i2c_info = info;
- int gpio_base, intr;
- char base_pin_name[SFI_NAME_LEN + 1];
- char intr_pin_name[SFI_NAME_LEN + 1];
-
- strcpy(i2c_info->type, TCA6416_NAME);
- strcpy(base_pin_name, TCA6416_BASE);
- strcpy(intr_pin_name, TCA6416_INTR);
-
- gpio_base = get_gpio_by_name(base_pin_name);
- intr = get_gpio_by_name(intr_pin_name);
-
- if (gpio_base < 0)
- return NULL;
- tca6416.gpio_base = gpio_base;
- if (intr >= 0) {
- i2c_info->irq = intr + INTEL_MID_IRQ_OFFSET;
- tca6416.irq_base = gpio_base + INTEL_MID_IRQ_OFFSET;
- } else {
- i2c_info->irq = -1;
- tca6416.irq_base = -1;
- }
- return &tca6416;
-}
-
-static const struct devs_id tca6416_dev_id __initconst = {
- .name = "tca6416",
- .type = SFI_DEV_TYPE_I2C,
- .delay = 1,
- .get_platform_data = &tca6416_platform_data,
-};
-
-sfi_device(tca6416_dev_id);
diff --git a/arch/x86/platform/intel-mid/intel-mid.c b/arch/x86/platform/intel-mid/intel-mid.c
index 780728161f7d..f4592dc7a1c1 100644
--- a/arch/x86/platform/intel-mid/intel-mid.c
+++ b/arch/x86/platform/intel-mid/intel-mid.c
@@ -1,8 +1,8 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
- * intel-mid.c: Intel MID platform setup code
+ * Intel MID platform setup code
*
- * (C) Copyright 2008, 2012 Intel Corporation
+ * (C) Copyright 2008, 2012, 2021 Intel Corporation
* Author: Jacob Pan (jacob.jun.pan@intel.com)
* Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
*/
@@ -14,7 +14,6 @@
#include <linux/interrupt.h>
#include <linux/regulator/machine.h>
#include <linux/scatterlist.h>
-#include <linux/sfi.h>
#include <linux/irq.h>
#include <linux/export.h>
#include <linux/notifier.h>
@@ -25,38 +24,13 @@
#include <asm/apic.h>
#include <asm/io_apic.h>
#include <asm/intel-mid.h>
-#include <asm/intel_mid_vrtc.h>
#include <asm/io.h>
#include <asm/i8259.h>
#include <asm/intel_scu_ipc.h>
-#include <asm/apb_timer.h>
#include <asm/reboot.h>
-/*
- * the clockevent devices on Moorestown/Medfield can be APBT or LAPIC clock,
- * cmdline option x86_intel_mid_timer can be used to override the configuration
- * to prefer one or the other.
- * at runtime, there are basically three timer configurations:
- * 1. per cpu apbt clock only
- * 2. per cpu always-on lapic clocks only, this is Penwell/Medfield only
- * 3. per cpu lapic clock (C3STOP) and one apbt clock, with broadcast.
- *
- * by default (without cmdline option), platform code first detects cpu type
- * to see if we are on lincroft or penwell, then set up both lapic or apbt
- * clocks accordingly.
- * i.e. by default, medfield uses configuration #2, moorestown uses #1.
- * config #3 is supported but not recommended on medfield.
- *
- * rating and feature summary:
- * lapic (with C3STOP) --------- 100
- * apbt (always-on) ------------ 110
- * lapic (always-on,ARAT) ------ 150
- */
-
-enum intel_mid_timer_options intel_mid_timer_options;
-
-enum intel_mid_cpu_type __intel_mid_cpu_chip;
-EXPORT_SYMBOL_GPL(__intel_mid_cpu_chip);
+#define IPCMSG_COLD_OFF 0x80 /* Only for Tangier */
+#define IPCMSG_COLD_RESET 0xF1
static void intel_mid_power_off(void)
{
@@ -64,69 +38,32 @@ static void intel_mid_power_off(void)
intel_mid_pwr_power_off();
/* Only for Tangier, the rest will ignore this command */
- intel_scu_ipc_simple_command(IPCMSG_COLD_OFF, 1);
+ intel_scu_ipc_dev_simple_command(NULL, IPCMSG_COLD_OFF, 1);
};
static void intel_mid_reboot(void)
{
- intel_scu_ipc_simple_command(IPCMSG_COLD_RESET, 0);
-}
-
-static void __init intel_mid_setup_bp_timer(void)
-{
- apbt_time_init();
- setup_boot_APIC_clock();
+ intel_scu_ipc_dev_simple_command(NULL, IPCMSG_COLD_RESET, 0);
}
static void __init intel_mid_time_init(void)
{
- sfi_table_parse(SFI_SIG_MTMR, NULL, NULL, sfi_parse_mtmr);
-
- switch (intel_mid_timer_options) {
- case INTEL_MID_TIMER_APBT_ONLY:
- break;
- case INTEL_MID_TIMER_LAPIC_APBT:
- /* Use apbt and local apic */
- x86_init.timers.setup_percpu_clockev = intel_mid_setup_bp_timer;
- x86_cpuinit.setup_percpu_clockev = setup_secondary_APIC_clock;
- return;
- default:
- if (!boot_cpu_has(X86_FEATURE_ARAT))
- break;
- /* Lapic only, no apbt */
- x86_init.timers.setup_percpu_clockev = setup_boot_APIC_clock;
- x86_cpuinit.setup_percpu_clockev = setup_secondary_APIC_clock;
- return;
- }
-
- x86_init.timers.setup_percpu_clockev = apbt_time_init;
+ /* Lapic only, no apbt */
+ x86_init.timers.setup_percpu_clockev = setup_boot_APIC_clock;
+ x86_cpuinit.setup_percpu_clockev = setup_secondary_APIC_clock;
}
static void intel_mid_arch_setup(void)
{
- if (boot_cpu_data.x86 != 6) {
- pr_err("Unknown Intel MID CPU (%d:%d), default to Penwell\n",
- boot_cpu_data.x86, boot_cpu_data.x86_model);
- __intel_mid_cpu_chip = INTEL_MID_CPU_CHIP_PENWELL;
- goto out;
- }
-
switch (boot_cpu_data.x86_model) {
- case 0x35:
- __intel_mid_cpu_chip = INTEL_MID_CPU_CHIP_CLOVERVIEW;
- break;
case 0x3C:
case 0x4A:
- __intel_mid_cpu_chip = INTEL_MID_CPU_CHIP_TANGIER;
x86_platform.legacy.rtc = 1;
break;
- case 0x27:
default:
- __intel_mid_cpu_chip = INTEL_MID_CPU_CHIP_PENWELL;
break;
}
-out:
/*
* Intel MID platforms are using explicitly defined regulators.
*
@@ -159,14 +96,11 @@ void __init x86_intel_mid_early_setup(void)
x86_init.timers.timer_init = intel_mid_time_init;
x86_init.timers.setup_percpu_clockev = x86_init_noop;
- x86_init.timers.wallclock_init = intel_mid_rtc_init;
x86_init.irqs.pre_vector_init = x86_init_noop;
x86_init.oem.arch_setup = intel_mid_arch_setup;
- x86_cpuinit.setup_percpu_clockev = apbt_setup_secondary_clock;
-
x86_platform.get_nmi_reason = intel_mid_get_nmi_reason;
x86_init.pci.arch_init = intel_mid_pci_init;
@@ -188,25 +122,3 @@ void __init x86_intel_mid_early_setup(void)
x86_init.mpparse.get_smp_config = x86_init_uint_noop;
set_bit(MP_BUS_ISA, mp_bus_not_pci);
}
-
-/*
- * if user does not want to use per CPU apb timer, just give it a lower rating
- * than local apic timer and skip the late per cpu timer init.
- */
-static inline int __init setup_x86_intel_mid_timer(char *arg)
-{
- if (!arg)
- return -EINVAL;
-
- if (strcmp("apbt_only", arg) == 0)
- intel_mid_timer_options = INTEL_MID_TIMER_APBT_ONLY;
- else if (strcmp("lapic_and_apbt", arg) == 0)
- intel_mid_timer_options = INTEL_MID_TIMER_LAPIC_APBT;
- else {
- pr_warn("X86 INTEL_MID timer option %s not recognised use x86_intel_mid_timer=apbt_only or lapic_and_apbt\n",
- arg);
- return -EINVAL;
- }
- return 0;
-}
-__setup("x86_intel_mid_timer=", setup_x86_intel_mid_timer);
diff --git a/arch/x86/platform/intel-mid/intel_mid_vrtc.c b/arch/x86/platform/intel-mid/intel_mid_vrtc.c
deleted file mode 100644
index 2226da4f437a..000000000000
--- a/arch/x86/platform/intel-mid/intel_mid_vrtc.c
+++ /dev/null
@@ -1,173 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * intel_mid_vrtc.c: Driver for virtual RTC device on Intel MID platform
- *
- * (C) Copyright 2009 Intel Corporation
- *
- * Note:
- * VRTC is emulated by system controller firmware, the real HW
- * RTC is located in the PMIC device. SCU FW shadows PMIC RTC
- * in a memory mapped IO space that is visible to the host IA
- * processor.
- *
- * This driver is based on RTC CMOS driver.
- */
-
-#include <linux/kernel.h>
-#include <linux/export.h>
-#include <linux/init.h>
-#include <linux/sfi.h>
-#include <linux/platform_device.h>
-#include <linux/mc146818rtc.h>
-
-#include <asm/intel-mid.h>
-#include <asm/intel_mid_vrtc.h>
-#include <asm/time.h>
-#include <asm/fixmap.h>
-
-static unsigned char __iomem *vrtc_virt_base;
-
-unsigned char vrtc_cmos_read(unsigned char reg)
-{
- unsigned char retval;
-
- /* vRTC's registers range from 0x0 to 0xD */
- if (reg > 0xd || !vrtc_virt_base)
- return 0xff;
-
- lock_cmos_prefix(reg);
- retval = __raw_readb(vrtc_virt_base + (reg << 2));
- lock_cmos_suffix(reg);
- return retval;
-}
-EXPORT_SYMBOL_GPL(vrtc_cmos_read);
-
-void vrtc_cmos_write(unsigned char val, unsigned char reg)
-{
- if (reg > 0xd || !vrtc_virt_base)
- return;
-
- lock_cmos_prefix(reg);
- __raw_writeb(val, vrtc_virt_base + (reg << 2));
- lock_cmos_suffix(reg);
-}
-EXPORT_SYMBOL_GPL(vrtc_cmos_write);
-
-void vrtc_get_time(struct timespec64 *now)
-{
- u8 sec, min, hour, mday, mon;
- unsigned long flags;
- u32 year;
-
- spin_lock_irqsave(&rtc_lock, flags);
-
- while ((vrtc_cmos_read(RTC_FREQ_SELECT) & RTC_UIP))
- cpu_relax();
-
- sec = vrtc_cmos_read(RTC_SECONDS);
- min = vrtc_cmos_read(RTC_MINUTES);
- hour = vrtc_cmos_read(RTC_HOURS);
- mday = vrtc_cmos_read(RTC_DAY_OF_MONTH);
- mon = vrtc_cmos_read(RTC_MONTH);
- year = vrtc_cmos_read(RTC_YEAR);
-
- spin_unlock_irqrestore(&rtc_lock, flags);
-
- /* vRTC YEAR reg contains the offset to 1972 */
- year += 1972;
-
- pr_info("vRTC: sec: %d min: %d hour: %d day: %d "
- "mon: %d year: %d\n", sec, min, hour, mday, mon, year);
-
- now->tv_sec = mktime64(year, mon, mday, hour, min, sec);
- now->tv_nsec = 0;
-}
-
-int vrtc_set_mmss(const struct timespec64 *now)
-{
- unsigned long flags;
- struct rtc_time tm;
- int year;
- int retval = 0;
-
- rtc_time64_to_tm(now->tv_sec, &tm);
- if (!rtc_valid_tm(&tm) && tm.tm_year >= 72) {
- /*
- * tm.year is the number of years since 1900, and the
- * vrtc need the years since 1972.
- */
- year = tm.tm_year - 72;
- spin_lock_irqsave(&rtc_lock, flags);
- vrtc_cmos_write(year, RTC_YEAR);
- vrtc_cmos_write(tm.tm_mon, RTC_MONTH);
- vrtc_cmos_write(tm.tm_mday, RTC_DAY_OF_MONTH);
- vrtc_cmos_write(tm.tm_hour, RTC_HOURS);
- vrtc_cmos_write(tm.tm_min, RTC_MINUTES);
- vrtc_cmos_write(tm.tm_sec, RTC_SECONDS);
- spin_unlock_irqrestore(&rtc_lock, flags);
- } else {
- pr_err("%s: Invalid vRTC value: write of %llx to vRTC failed\n",
- __func__, (s64)now->tv_sec);
- retval = -EINVAL;
- }
- return retval;
-}
-
-void __init intel_mid_rtc_init(void)
-{
- unsigned long vrtc_paddr;
-
- sfi_table_parse(SFI_SIG_MRTC, NULL, NULL, sfi_parse_mrtc);
-
- vrtc_paddr = sfi_mrtc_array[0].phys_addr;
- if (!sfi_mrtc_num || !vrtc_paddr)
- return;
-
- vrtc_virt_base = (void __iomem *)set_fixmap_offset_nocache(FIX_LNW_VRTC,
- vrtc_paddr);
- x86_platform.get_wallclock = vrtc_get_time;
- x86_platform.set_wallclock = vrtc_set_mmss;
-}
-
-/*
- * The Moorestown platform has a memory mapped virtual RTC device that emulates
- * the programming interface of the RTC.
- */
-
-static struct resource vrtc_resources[] = {
- [0] = {
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static struct platform_device vrtc_device = {
- .name = "rtc_mrst",
- .id = -1,
- .resource = vrtc_resources,
- .num_resources = ARRAY_SIZE(vrtc_resources),
-};
-
-/* Register the RTC device if appropriate */
-static int __init intel_mid_device_create(void)
-{
- /* No Moorestown, no device */
- if (!intel_mid_identify_cpu())
- return -ENODEV;
- /* No timer, no device */
- if (!sfi_mrtc_num)
- return -ENODEV;
-
- /* iomem resource */
- vrtc_resources[0].start = sfi_mrtc_array[0].phys_addr;
- vrtc_resources[0].end = sfi_mrtc_array[0].phys_addr +
- MRST_VRTC_MAP_SZ;
- /* irq resource */
- vrtc_resources[1].start = sfi_mrtc_array[0].irq;
- vrtc_resources[1].end = sfi_mrtc_array[0].irq;
-
- return platform_device_register(&vrtc_device);
-}
-device_initcall(intel_mid_device_create);
diff --git a/arch/x86/platform/intel-mid/sfi.c b/arch/x86/platform/intel-mid/sfi.c
deleted file mode 100644
index 30bd5714a3d4..000000000000
--- a/arch/x86/platform/intel-mid/sfi.c
+++ /dev/null
@@ -1,543 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * intel_mid_sfi.c: Intel MID SFI initialization code
- *
- * (C) Copyright 2013 Intel Corporation
- * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/scatterlist.h>
-#include <linux/sfi.h>
-#include <linux/spi/spi.h>
-#include <linux/i2c.h>
-#include <linux/skbuff.h>
-#include <linux/gpio.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/platform_device.h>
-#include <linux/irq.h>
-#include <linux/export.h>
-#include <linux/notifier.h>
-#include <linux/mmc/core.h>
-#include <linux/mmc/card.h>
-#include <linux/blkdev.h>
-
-#include <asm/setup.h>
-#include <asm/mpspec_def.h>
-#include <asm/hw_irq.h>
-#include <asm/apic.h>
-#include <asm/io_apic.h>
-#include <asm/intel-mid.h>
-#include <asm/intel_mid_vrtc.h>
-#include <asm/io.h>
-#include <asm/i8259.h>
-#include <asm/intel_scu_ipc.h>
-#include <asm/apb_timer.h>
-#include <asm/reboot.h>
-
-#define SFI_SIG_OEM0 "OEM0"
-#define MAX_IPCDEVS 24
-#define MAX_SCU_SPI 24
-#define MAX_SCU_I2C 24
-
-static struct platform_device *ipc_devs[MAX_IPCDEVS];
-static struct spi_board_info *spi_devs[MAX_SCU_SPI];
-static struct i2c_board_info *i2c_devs[MAX_SCU_I2C];
-static struct sfi_gpio_table_entry *gpio_table;
-static struct sfi_timer_table_entry sfi_mtimer_array[SFI_MTMR_MAX_NUM];
-static int ipc_next_dev;
-static int spi_next_dev;
-static int i2c_next_dev;
-static int i2c_bus[MAX_SCU_I2C];
-static int gpio_num_entry;
-static u32 sfi_mtimer_usage[SFI_MTMR_MAX_NUM];
-int sfi_mrtc_num;
-int sfi_mtimer_num;
-
-struct sfi_rtc_table_entry sfi_mrtc_array[SFI_MRTC_MAX];
-EXPORT_SYMBOL_GPL(sfi_mrtc_array);
-
-struct blocking_notifier_head intel_scu_notifier =
- BLOCKING_NOTIFIER_INIT(intel_scu_notifier);
-EXPORT_SYMBOL_GPL(intel_scu_notifier);
-
-#define intel_mid_sfi_get_pdata(dev, priv) \
- ((dev)->get_platform_data ? (dev)->get_platform_data(priv) : NULL)
-
-/* parse all the mtimer info to a static mtimer array */
-int __init sfi_parse_mtmr(struct sfi_table_header *table)
-{
- struct sfi_table_simple *sb;
- struct sfi_timer_table_entry *pentry;
- struct mpc_intsrc mp_irq;
- int totallen;
-
- sb = (struct sfi_table_simple *)table;
- if (!sfi_mtimer_num) {
- sfi_mtimer_num = SFI_GET_NUM_ENTRIES(sb,
- struct sfi_timer_table_entry);
- pentry = (struct sfi_timer_table_entry *) sb->pentry;
- totallen = sfi_mtimer_num * sizeof(*pentry);
- memcpy(sfi_mtimer_array, pentry, totallen);
- }
-
- pr_debug("SFI MTIMER info (num = %d):\n", sfi_mtimer_num);
- pentry = sfi_mtimer_array;
- for (totallen = 0; totallen < sfi_mtimer_num; totallen++, pentry++) {
- pr_debug("timer[%d]: paddr = 0x%08x, freq = %dHz, irq = %d\n",
- totallen, (u32)pentry->phys_addr,
- pentry->freq_hz, pentry->irq);
- mp_irq.type = MP_INTSRC;
- mp_irq.irqtype = mp_INT;
- mp_irq.irqflag = MP_IRQTRIG_EDGE | MP_IRQPOL_ACTIVE_HIGH;
- mp_irq.srcbus = MP_BUS_ISA;
- mp_irq.srcbusirq = pentry->irq; /* IRQ */
- mp_irq.dstapic = MP_APIC_ALL;
- mp_irq.dstirq = pentry->irq;
- mp_save_irq(&mp_irq);
- mp_map_gsi_to_irq(pentry->irq, IOAPIC_MAP_ALLOC, NULL);
- }
-
- return 0;
-}
-
-struct sfi_timer_table_entry *sfi_get_mtmr(int hint)
-{
- int i;
- if (hint < sfi_mtimer_num) {
- if (!sfi_mtimer_usage[hint]) {
- pr_debug("hint taken for timer %d irq %d\n",
- hint, sfi_mtimer_array[hint].irq);
- sfi_mtimer_usage[hint] = 1;
- return &sfi_mtimer_array[hint];
- }
- }
- /* take the first timer available */
- for (i = 0; i < sfi_mtimer_num;) {
- if (!sfi_mtimer_usage[i]) {
- sfi_mtimer_usage[i] = 1;
- return &sfi_mtimer_array[i];
- }
- i++;
- }
- return NULL;
-}
-
-void sfi_free_mtmr(struct sfi_timer_table_entry *mtmr)
-{
- int i;
- for (i = 0; i < sfi_mtimer_num;) {
- if (mtmr->irq == sfi_mtimer_array[i].irq) {
- sfi_mtimer_usage[i] = 0;
- return;
- }
- i++;
- }
-}
-
-/* parse all the mrtc info to a global mrtc array */
-int __init sfi_parse_mrtc(struct sfi_table_header *table)
-{
- struct sfi_table_simple *sb;
- struct sfi_rtc_table_entry *pentry;
- struct mpc_intsrc mp_irq;
-
- int totallen;
-
- sb = (struct sfi_table_simple *)table;
- if (!sfi_mrtc_num) {
- sfi_mrtc_num = SFI_GET_NUM_ENTRIES(sb,
- struct sfi_rtc_table_entry);
- pentry = (struct sfi_rtc_table_entry *)sb->pentry;
- totallen = sfi_mrtc_num * sizeof(*pentry);
- memcpy(sfi_mrtc_array, pentry, totallen);
- }
-
- pr_debug("SFI RTC info (num = %d):\n", sfi_mrtc_num);
- pentry = sfi_mrtc_array;
- for (totallen = 0; totallen < sfi_mrtc_num; totallen++, pentry++) {
- pr_debug("RTC[%d]: paddr = 0x%08x, irq = %d\n",
- totallen, (u32)pentry->phys_addr, pentry->irq);
- mp_irq.type = MP_INTSRC;
- mp_irq.irqtype = mp_INT;
- mp_irq.irqflag = MP_IRQTRIG_LEVEL | MP_IRQPOL_ACTIVE_LOW;
- mp_irq.srcbus = MP_BUS_ISA;
- mp_irq.srcbusirq = pentry->irq; /* IRQ */
- mp_irq.dstapic = MP_APIC_ALL;
- mp_irq.dstirq = pentry->irq;
- mp_save_irq(&mp_irq);
- mp_map_gsi_to_irq(pentry->irq, IOAPIC_MAP_ALLOC, NULL);
- }
- return 0;
-}
-
-
-/*
- * Parsing GPIO table first, since the DEVS table will need this table
- * to map the pin name to the actual pin.
- */
-static int __init sfi_parse_gpio(struct sfi_table_header *table)
-{
- struct sfi_table_simple *sb;
- struct sfi_gpio_table_entry *pentry;
- int num, i;
-
- if (gpio_table)
- return 0;
- sb = (struct sfi_table_simple *)table;
- num = SFI_GET_NUM_ENTRIES(sb, struct sfi_gpio_table_entry);
- pentry = (struct sfi_gpio_table_entry *)sb->pentry;
-
- gpio_table = kmemdup(pentry, num * sizeof(*pentry), GFP_KERNEL);
- if (!gpio_table)
- return -1;
- gpio_num_entry = num;
-
- pr_debug("GPIO pin info:\n");
- for (i = 0; i < num; i++, pentry++)
- pr_debug("info[%2d]: controller = %16.16s, pin_name = %16.16s,"
- " pin = %d\n", i,
- pentry->controller_name,
- pentry->pin_name,
- pentry->pin_no);
- return 0;
-}
-
-int get_gpio_by_name(const char *name)
-{
- struct sfi_gpio_table_entry *pentry = gpio_table;
- int i;
-
- if (!pentry)
- return -1;
- for (i = 0; i < gpio_num_entry; i++, pentry++) {
- if (!strncmp(name, pentry->pin_name, SFI_NAME_LEN))
- return pentry->pin_no;
- }
- return -EINVAL;
-}
-
-static void __init intel_scu_ipc_device_register(struct platform_device *pdev)
-{
- if (ipc_next_dev == MAX_IPCDEVS)
- pr_err("too many SCU IPC devices");
- else
- ipc_devs[ipc_next_dev++] = pdev;
-}
-
-static void __init intel_scu_spi_device_register(struct spi_board_info *sdev)
-{
- struct spi_board_info *new_dev;
-
- if (spi_next_dev == MAX_SCU_SPI) {
- pr_err("too many SCU SPI devices");
- return;
- }
-
- new_dev = kzalloc(sizeof(*sdev), GFP_KERNEL);
- if (!new_dev) {
- pr_err("failed to alloc mem for delayed spi dev %s\n",
- sdev->modalias);
- return;
- }
- *new_dev = *sdev;
-
- spi_devs[spi_next_dev++] = new_dev;
-}
-
-static void __init intel_scu_i2c_device_register(int bus,
- struct i2c_board_info *idev)
-{
- struct i2c_board_info *new_dev;
-
- if (i2c_next_dev == MAX_SCU_I2C) {
- pr_err("too many SCU I2C devices");
- return;
- }
-
- new_dev = kzalloc(sizeof(*idev), GFP_KERNEL);
- if (!new_dev) {
- pr_err("failed to alloc mem for delayed i2c dev %s\n",
- idev->type);
- return;
- }
- *new_dev = *idev;
-
- i2c_bus[i2c_next_dev] = bus;
- i2c_devs[i2c_next_dev++] = new_dev;
-}
-
-/* Called by IPC driver */
-void intel_scu_devices_create(void)
-{
- int i;
-
- for (i = 0; i < ipc_next_dev; i++)
- platform_device_add(ipc_devs[i]);
-
- for (i = 0; i < spi_next_dev; i++)
- spi_register_board_info(spi_devs[i], 1);
-
- for (i = 0; i < i2c_next_dev; i++) {
- struct i2c_adapter *adapter;
- struct i2c_client *client;
-
- adapter = i2c_get_adapter(i2c_bus[i]);
- if (adapter) {
- client = i2c_new_client_device(adapter, i2c_devs[i]);
- if (IS_ERR(client))
- pr_err("can't create i2c device %s\n",
- i2c_devs[i]->type);
- } else
- i2c_register_board_info(i2c_bus[i], i2c_devs[i], 1);
- }
- intel_scu_notifier_post(SCU_AVAILABLE, NULL);
-}
-EXPORT_SYMBOL_GPL(intel_scu_devices_create);
-
-/* Called by IPC driver */
-void intel_scu_devices_destroy(void)
-{
- int i;
-
- intel_scu_notifier_post(SCU_DOWN, NULL);
-
- for (i = 0; i < ipc_next_dev; i++)
- platform_device_del(ipc_devs[i]);
-}
-EXPORT_SYMBOL_GPL(intel_scu_devices_destroy);
-
-static void __init install_irq_resource(struct platform_device *pdev, int irq)
-{
- /* Single threaded */
- static struct resource res __initdata = {
- .name = "IRQ",
- .flags = IORESOURCE_IRQ,
- };
- res.start = irq;
- platform_device_add_resources(pdev, &res, 1);
-}
-
-static void __init sfi_handle_ipc_dev(struct sfi_device_table_entry *pentry,
- struct devs_id *dev)
-{
- struct platform_device *pdev;
- void *pdata = NULL;
-
- pr_debug("IPC bus, name = %16.16s, irq = 0x%2x\n",
- pentry->name, pentry->irq);
-
- /*
- * We need to call platform init of IPC devices to fill misc_pdata
- * structure. It will be used in msic_init for initialization.
- */
- pdata = intel_mid_sfi_get_pdata(dev, pentry);
- if (IS_ERR(pdata))
- return;
-
- /*
- * On Medfield the platform device creation is handled by the MSIC
- * MFD driver so we don't need to do it here.
- */
- if (dev->msic && intel_mid_has_msic())
- return;
-
- pdev = platform_device_alloc(pentry->name, 0);
- if (pdev == NULL) {
- pr_err("out of memory for SFI platform device '%s'.\n",
- pentry->name);
- return;
- }
- install_irq_resource(pdev, pentry->irq);
-
- pdev->dev.platform_data = pdata;
- if (dev->delay)
- intel_scu_ipc_device_register(pdev);
- else
- platform_device_add(pdev);
-}
-
-static void __init sfi_handle_spi_dev(struct sfi_device_table_entry *pentry,
- struct devs_id *dev)
-{
- struct spi_board_info spi_info;
- void *pdata = NULL;
-
- memset(&spi_info, 0, sizeof(spi_info));
- strncpy(spi_info.modalias, pentry->name, SFI_NAME_LEN);
- spi_info.irq = ((pentry->irq == (u8)0xff) ? 0 : pentry->irq);
- spi_info.bus_num = pentry->host_num;
- spi_info.chip_select = pentry->addr;
- spi_info.max_speed_hz = pentry->max_freq;
- pr_debug("SPI bus=%d, name=%16.16s, irq=0x%2x, max_freq=%d, cs=%d\n",
- spi_info.bus_num,
- spi_info.modalias,
- spi_info.irq,
- spi_info.max_speed_hz,
- spi_info.chip_select);
-
- pdata = intel_mid_sfi_get_pdata(dev, &spi_info);
- if (IS_ERR(pdata))
- return;
-
- spi_info.platform_data = pdata;
- if (dev->delay)
- intel_scu_spi_device_register(&spi_info);
- else
- spi_register_board_info(&spi_info, 1);
-}
-
-static void __init sfi_handle_i2c_dev(struct sfi_device_table_entry *pentry,
- struct devs_id *dev)
-{
- struct i2c_board_info i2c_info;
- void *pdata = NULL;
-
- memset(&i2c_info, 0, sizeof(i2c_info));
- strncpy(i2c_info.type, pentry->name, SFI_NAME_LEN);
- i2c_info.irq = ((pentry->irq == (u8)0xff) ? 0 : pentry->irq);
- i2c_info.addr = pentry->addr;
- pr_debug("I2C bus = %d, name = %16.16s, irq = 0x%2x, addr = 0x%x\n",
- pentry->host_num,
- i2c_info.type,
- i2c_info.irq,
- i2c_info.addr);
- pdata = intel_mid_sfi_get_pdata(dev, &i2c_info);
- i2c_info.platform_data = pdata;
- if (IS_ERR(pdata))
- return;
-
- if (dev->delay)
- intel_scu_i2c_device_register(pentry->host_num, &i2c_info);
- else
- i2c_register_board_info(pentry->host_num, &i2c_info, 1);
-}
-
-static void __init sfi_handle_sd_dev(struct sfi_device_table_entry *pentry,
- struct devs_id *dev)
-{
- struct mid_sd_board_info sd_info;
- void *pdata;
-
- memset(&sd_info, 0, sizeof(sd_info));
- strncpy(sd_info.name, pentry->name, SFI_NAME_LEN);
- sd_info.bus_num = pentry->host_num;
- sd_info.max_clk = pentry->max_freq;
- sd_info.addr = pentry->addr;
- pr_debug("SD bus = %d, name = %16.16s, max_clk = %d, addr = 0x%x\n",
- sd_info.bus_num,
- sd_info.name,
- sd_info.max_clk,
- sd_info.addr);
- pdata = intel_mid_sfi_get_pdata(dev, &sd_info);
- if (IS_ERR(pdata))
- return;
-
- /* Nothing we can do with this for now */
- sd_info.platform_data = pdata;
-
- pr_debug("Successfully registered %16.16s", sd_info.name);
-}
-
-extern struct devs_id *const __x86_intel_mid_dev_start[],
- *const __x86_intel_mid_dev_end[];
-
-static struct devs_id __init *get_device_id(u8 type, char *name)
-{
- struct devs_id *const *dev_table;
-
- for (dev_table = __x86_intel_mid_dev_start;
- dev_table < __x86_intel_mid_dev_end; dev_table++) {
- struct devs_id *dev = *dev_table;
- if (dev->type == type &&
- !strncmp(dev->name, name, SFI_NAME_LEN)) {
- return dev;
- }
- }
-
- return NULL;
-}
-
-static int __init sfi_parse_devs(struct sfi_table_header *table)
-{
- struct sfi_table_simple *sb;
- struct sfi_device_table_entry *pentry;
- struct devs_id *dev = NULL;
- int num, i, ret;
- int polarity;
- struct irq_alloc_info info;
-
- sb = (struct sfi_table_simple *)table;
- num = SFI_GET_NUM_ENTRIES(sb, struct sfi_device_table_entry);
- pentry = (struct sfi_device_table_entry *)sb->pentry;
-
- for (i = 0; i < num; i++, pentry++) {
- int irq = pentry->irq;
-
- if (irq != (u8)0xff) { /* native RTE case */
- /* these SPI2 devices are not exposed to system as PCI
- * devices, but they have separate RTE entry in IOAPIC
- * so we have to enable them one by one here
- */
- if (intel_mid_identify_cpu() ==
- INTEL_MID_CPU_CHIP_TANGIER) {
- if (!strncmp(pentry->name, "r69001-ts-i2c", 13))
- /* active low */
- polarity = 1;
- else if (!strncmp(pentry->name,
- "synaptics_3202", 14))
- /* active low */
- polarity = 1;
- else if (irq == 41)
- /* fast_int_1 */
- polarity = 1;
- else
- /* active high */
- polarity = 0;
- } else {
- /* PNW and CLV go with active low */
- polarity = 1;
- }
-
- ioapic_set_alloc_attr(&info, NUMA_NO_NODE, 1, polarity);
- ret = mp_map_gsi_to_irq(irq, IOAPIC_MAP_ALLOC, &info);
- WARN_ON(ret < 0);
- }
-
- dev = get_device_id(pentry->type, pentry->name);
-
- if (!dev)
- continue;
-
- switch (pentry->type) {
- case SFI_DEV_TYPE_IPC:
- sfi_handle_ipc_dev(pentry, dev);
- break;
- case SFI_DEV_TYPE_SPI:
- sfi_handle_spi_dev(pentry, dev);
- break;
- case SFI_DEV_TYPE_I2C:
- sfi_handle_i2c_dev(pentry, dev);
- break;
- case SFI_DEV_TYPE_SD:
- sfi_handle_sd_dev(pentry, dev);
- break;
- case SFI_DEV_TYPE_UART:
- case SFI_DEV_TYPE_HSI:
- default:
- break;
- }
- }
- return 0;
-}
-
-static int __init intel_mid_platform_init(void)
-{
- sfi_table_parse(SFI_SIG_GPIO, NULL, NULL, sfi_parse_gpio);
- sfi_table_parse(SFI_SIG_DEVS, NULL, NULL, sfi_parse_devs);
- return 0;
-}
-arch_initcall(intel_mid_platform_init);
diff --git a/arch/x86/platform/sfi/Makefile b/arch/x86/platform/sfi/Makefile
deleted file mode 100644
index 4eba24c2af67..000000000000
--- a/arch/x86/platform/sfi/Makefile
+++ /dev/null
@@ -1,2 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-obj-$(CONFIG_SFI) += sfi.o
diff --git a/arch/x86/platform/sfi/sfi.c b/arch/x86/platform/sfi/sfi.c
deleted file mode 100644
index 6259563760f9..000000000000
--- a/arch/x86/platform/sfi/sfi.c
+++ /dev/null
@@ -1,100 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * sfi.c - x86 architecture SFI support.
- *
- * Copyright (c) 2009, Intel Corporation.
- */
-
-#define KMSG_COMPONENT "SFI"
-#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
-
-#include <linux/acpi.h>
-#include <linux/init.h>
-#include <linux/sfi.h>
-#include <linux/io.h>
-
-#include <asm/irqdomain.h>
-#include <asm/io_apic.h>
-#include <asm/mpspec.h>
-#include <asm/setup.h>
-#include <asm/apic.h>
-
-#ifdef CONFIG_X86_LOCAL_APIC
-static unsigned long sfi_lapic_addr __initdata = APIC_DEFAULT_PHYS_BASE;
-
-/* All CPUs enumerated by SFI must be present and enabled */
-static void __init mp_sfi_register_lapic(u8 id)
-{
- if (MAX_LOCAL_APIC - id <= 0) {
- pr_warn("Processor #%d invalid (max %d)\n", id, MAX_LOCAL_APIC);
- return;
- }
-
- pr_info("registering lapic[%d]\n", id);
-
- generic_processor_info(id, GET_APIC_VERSION(apic_read(APIC_LVR)));
-}
-
-static int __init sfi_parse_cpus(struct sfi_table_header *table)
-{
- struct sfi_table_simple *sb;
- struct sfi_cpu_table_entry *pentry;
- int i;
- int cpu_num;
-
- sb = (struct sfi_table_simple *)table;
- cpu_num = SFI_GET_NUM_ENTRIES(sb, struct sfi_cpu_table_entry);
- pentry = (struct sfi_cpu_table_entry *)sb->pentry;
-
- for (i = 0; i < cpu_num; i++) {
- mp_sfi_register_lapic(pentry->apic_id);
- pentry++;
- }
-
- smp_found_config = 1;
- return 0;
-}
-#endif /* CONFIG_X86_LOCAL_APIC */
-
-#ifdef CONFIG_X86_IO_APIC
-
-static int __init sfi_parse_ioapic(struct sfi_table_header *table)
-{
- struct sfi_table_simple *sb;
- struct sfi_apic_table_entry *pentry;
- int i, num;
- struct ioapic_domain_cfg cfg = {
- .type = IOAPIC_DOMAIN_STRICT,
- .ops = &mp_ioapic_irqdomain_ops,
- };
-
- sb = (struct sfi_table_simple *)table;
- num = SFI_GET_NUM_ENTRIES(sb, struct sfi_apic_table_entry);
- pentry = (struct sfi_apic_table_entry *)sb->pentry;
-
- for (i = 0; i < num; i++) {
- mp_register_ioapic(i, pentry->phys_addr, gsi_top, &cfg);
- pentry++;
- }
-
- WARN(pic_mode, KERN_WARNING
- "SFI: pic_mod shouldn't be 1 when IOAPIC table is present\n");
- pic_mode = 0;
- return 0;
-}
-#endif /* CONFIG_X86_IO_APIC */
-
-/*
- * sfi_platform_init(): register lapics & io-apics
- */
-int __init sfi_platform_init(void)
-{
-#ifdef CONFIG_X86_LOCAL_APIC
- register_lapic_address(sfi_lapic_addr);
- sfi_table_parse(SFI_SIG_CPUS, NULL, NULL, sfi_parse_cpus);
-#endif
-#ifdef CONFIG_X86_IO_APIC
- sfi_table_parse(SFI_SIG_APIC, NULL, NULL, sfi_parse_ioapic);
-#endif
- return 0;
-}
diff --git a/drivers/Makefile b/drivers/Makefile
index 678ea810410f..6fba7daba591 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -27,7 +27,7 @@ obj-y += idle/
obj-y += char/ipmi/
obj-$(CONFIG_ACPI) += acpi/
-obj-$(CONFIG_SFI) += sfi/
+
# PnP must come after ACPI since it will eventually need to check if acpi
# was used and do nothing if so
obj-$(CONFIG_PNP) += pnp/
diff --git a/drivers/cpufreq/Kconfig.x86 b/drivers/cpufreq/Kconfig.x86
index 399526289320..92701a18bdd9 100644
--- a/drivers/cpufreq/Kconfig.x86
+++ b/drivers/cpufreq/Kconfig.x86
@@ -62,16 +62,6 @@ config X86_ACPI_CPUFREQ_CPB
By enabling this option the acpi_cpufreq driver provides the old
entry in addition to the new boost ones, for compatibility reasons.
-config X86_SFI_CPUFREQ
- tristate "SFI Performance-States driver"
- depends on X86_INTEL_MID && SFI
- help
- This adds a CPUFreq driver for some Silvermont based Intel Atom
- architectures like Z34xx and Z35xx which enumerate processor
- performance states through SFI.
-
- If in doubt, say N.
-
config ELAN_CPUFREQ
tristate "AMD Elan SC400 and SC410"
depends on MELAN
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index 1ab9b1536304..27d3bd7ea9d4 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -43,7 +43,6 @@ obj-$(CONFIG_X86_P4_CLOCKMOD) += p4-clockmod.o
obj-$(CONFIG_X86_CPUFREQ_NFORCE2) += cpufreq-nforce2.o
obj-$(CONFIG_X86_INTEL_PSTATE) += intel_pstate.o
obj-$(CONFIG_X86_AMD_FREQ_SENSITIVITY) += amd_freq_sensitivity.o
-obj-$(CONFIG_X86_SFI_CPUFREQ) += sfi-cpufreq.o
##################################################################################
# ARM SoC drivers
diff --git a/drivers/cpufreq/sfi-cpufreq.c b/drivers/cpufreq/sfi-cpufreq.c
deleted file mode 100644
index 45cfdf67cf03..000000000000
--- a/drivers/cpufreq/sfi-cpufreq.c
+++ /dev/null
@@ -1,127 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * SFI Performance States Driver
- *
- * Author: Vishwesh M Rudramuni <vishwesh.m.rudramuni@intel.com>
- * Author: Srinidhi Kasagar <srinidhi.kasagar@intel.com>
- */
-
-#include <linux/cpufreq.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/sfi.h>
-#include <linux/slab.h>
-#include <linux/smp.h>
-
-#include <asm/msr.h>
-
-static struct cpufreq_frequency_table *freq_table;
-static struct sfi_freq_table_entry *sfi_cpufreq_array;
-static int num_freq_table_entries;
-
-static int sfi_parse_freq(struct sfi_table_header *table)
-{
- struct sfi_table_simple *sb;
- struct sfi_freq_table_entry *pentry;
- int totallen;
-
- sb = (struct sfi_table_simple *)table;
- num_freq_table_entries = SFI_GET_NUM_ENTRIES(sb,
- struct sfi_freq_table_entry);
- if (num_freq_table_entries <= 1) {
- pr_err("No p-states discovered\n");
- return -ENODEV;
- }
-
- pentry = (struct sfi_freq_table_entry *)sb->pentry;
- totallen = num_freq_table_entries * sizeof(*pentry);
-
- sfi_cpufreq_array = kmemdup(pentry, totallen, GFP_KERNEL);
- if (!sfi_cpufreq_array)
- return -ENOMEM;
-
- return 0;
-}
-
-static int sfi_cpufreq_target(struct cpufreq_policy *policy, unsigned int index)
-{
- unsigned int next_perf_state = 0; /* Index into perf table */
- u32 lo, hi;
-
- next_perf_state = policy->freq_table[index].driver_data;
-
- rdmsr_on_cpu(policy->cpu, MSR_IA32_PERF_CTL, &lo, &hi);
- lo = (lo & ~INTEL_PERF_CTL_MASK) |
- ((u32) sfi_cpufreq_array[next_perf_state].ctrl_val &
- INTEL_PERF_CTL_MASK);
- wrmsr_on_cpu(policy->cpu, MSR_IA32_PERF_CTL, lo, hi);
-
- return 0;
-}
-
-static int sfi_cpufreq_cpu_init(struct cpufreq_policy *policy)
-{
- policy->shared_type = CPUFREQ_SHARED_TYPE_HW;
- policy->cpuinfo.transition_latency = 100000; /* 100us */
- policy->freq_table = freq_table;
-
- return 0;
-}
-
-static struct cpufreq_driver sfi_cpufreq_driver = {
- .flags = CPUFREQ_CONST_LOOPS,
- .verify = cpufreq_generic_frequency_table_verify,
- .target_index = sfi_cpufreq_target,
- .init = sfi_cpufreq_cpu_init,
- .name = "sfi-cpufreq",
- .attr = cpufreq_generic_attr,
-};
-
-static int __init sfi_cpufreq_init(void)
-{
- int ret, i;
-
- /* parse the freq table from SFI */
- ret = sfi_table_parse(SFI_SIG_FREQ, NULL, NULL, sfi_parse_freq);
- if (ret)
- return ret;
-
- freq_table = kcalloc(num_freq_table_entries + 1, sizeof(*freq_table),
- GFP_KERNEL);
- if (!freq_table) {
- ret = -ENOMEM;
- goto err_free_array;
- }
-
- for (i = 0; i < num_freq_table_entries; i++) {
- freq_table[i].driver_data = i;
- freq_table[i].frequency = sfi_cpufreq_array[i].freq_mhz * 1000;
- }
- freq_table[i].frequency = CPUFREQ_TABLE_END;
-
- ret = cpufreq_register_driver(&sfi_cpufreq_driver);
- if (ret)
- goto err_free_tbl;
-
- return ret;
-
-err_free_tbl:
- kfree(freq_table);
-err_free_array:
- kfree(sfi_cpufreq_array);
- return ret;
-}
-late_initcall(sfi_cpufreq_init);
-
-static void __exit sfi_cpufreq_exit(void)
-{
- cpufreq_unregister_driver(&sfi_cpufreq_driver);
- kfree(freq_table);
- kfree(sfi_cpufreq_array);
-}
-module_exit(sfi_cpufreq_exit);
-
-MODULE_AUTHOR("Vishwesh M Rudramuni <vishwesh.m.rudramuni@intel.com>");
-MODULE_DESCRIPTION("SFI Performance-States Driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 40c723e9a852..b74efa469e90 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -659,15 +659,6 @@ config MFD_INTEL_LPSS_PCI
I2C, SPI and HS-UART starting from Intel Sunrisepoint (Intel Skylake
PCH) in PCI mode.
-config MFD_INTEL_MSIC
- bool "Intel MSIC"
- depends on INTEL_SCU
- select MFD_CORE
- help
- Select this option to enable access to Intel MSIC (Avatele
- Passage) chip. This chip embeds audio, battery, GPIO, etc.
- devices used in Intel Medfield platforms.
-
config MFD_INTEL_PMC_BXT
tristate "Intel PMC Driver for Broxton"
depends on X86
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 025543418835..834f5463af28 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -214,7 +214,6 @@ obj-$(CONFIG_MFD_ATMEL_SMC) += atmel-smc.o
obj-$(CONFIG_MFD_INTEL_LPSS) += intel-lpss.o
obj-$(CONFIG_MFD_INTEL_LPSS_PCI) += intel-lpss-pci.o
obj-$(CONFIG_MFD_INTEL_LPSS_ACPI) += intel-lpss-acpi.o
-obj-$(CONFIG_MFD_INTEL_MSIC) += intel_msic.o
obj-$(CONFIG_MFD_INTEL_PMC_BXT) += intel_pmc_bxt.o
obj-$(CONFIG_MFD_INTEL_PMT) += intel_pmt.o
obj-$(CONFIG_MFD_PALMAS) += palmas.o
diff --git a/drivers/mfd/intel_msic.c b/drivers/mfd/intel_msic.c
deleted file mode 100644
index daa772f8146b..000000000000
--- a/drivers/mfd/intel_msic.c
+++ /dev/null
@@ -1,425 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Driver for Intel MSIC
- *
- * Copyright (C) 2011, Intel Corporation
- * Author: Mika Westerberg <mika.westerberg@linux.intel.com>
- */
-
-#include <linux/err.h>
-#include <linux/gpio.h>
-#include <linux/io.h>
-#include <linux/init.h>
-#include <linux/mfd/core.h>
-#include <linux/mfd/intel_msic.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-
-#include <asm/intel_scu_ipc.h>
-
-#define MSIC_VENDOR(id) ((id >> 6) & 3)
-#define MSIC_VERSION(id) (id & 0x3f)
-#define MSIC_MAJOR(id) ('A' + ((id >> 3) & 7))
-#define MSIC_MINOR(id) (id & 7)
-
-/*
- * MSIC interrupt tree is readable from SRAM at INTEL_MSIC_IRQ_PHYS_BASE.
- * Since IRQ block starts from address 0x002 we need to subtract that from
- * the actual IRQ status register address.
- */
-#define MSIC_IRQ_STATUS(x) (INTEL_MSIC_IRQ_PHYS_BASE + ((x) - 2))
-#define MSIC_IRQ_STATUS_ACCDET MSIC_IRQ_STATUS(INTEL_MSIC_ACCDET)
-
-/*
- * The SCU hardware has limitation of 16 bytes per read/write buffer on
- * Medfield.
- */
-#define SCU_IPC_RWBUF_LIMIT 16
-
-/**
- * struct intel_msic - an MSIC MFD instance
- * @pdev: pointer to the platform device
- * @vendor: vendor ID
- * @version: chip version
- * @irq_base: base address of the mapped MSIC SRAM interrupt tree
- */
-struct intel_msic {
- struct platform_device *pdev;
- unsigned vendor;
- unsigned version;
- void __iomem *irq_base;
-};
-
-static const struct resource msic_touch_resources[] = {
- DEFINE_RES_IRQ(0),
-};
-
-static const struct resource msic_adc_resources[] = {
- DEFINE_RES_IRQ(0),
-};
-
-static const struct resource msic_battery_resources[] = {
- DEFINE_RES_IRQ(0),
-};
-
-static const struct resource msic_gpio_resources[] = {
- DEFINE_RES_IRQ(0),
-};
-
-static const struct resource msic_audio_resources[] = {
- DEFINE_RES_IRQ_NAMED(0, "IRQ"),
- /*
- * We will pass IRQ_BASE to the driver now but this can be removed
- * when/if the driver starts to use intel_msic_irq_read().
- */
- DEFINE_RES_MEM_NAMED(MSIC_IRQ_STATUS_ACCDET, 1, "IRQ_BASE"),
-};
-
-static const struct resource msic_hdmi_resources[] = {
- DEFINE_RES_IRQ(0),
-};
-
-static const struct resource msic_thermal_resources[] = {
- DEFINE_RES_IRQ(0),
-};
-
-static const struct resource msic_power_btn_resources[] = {
- DEFINE_RES_IRQ(0),
-};
-
-static const struct resource msic_ocd_resources[] = {
- DEFINE_RES_IRQ(0),
-};
-
-/*
- * Devices that are part of the MSIC and are available via firmware
- * populated SFI DEVS table.
- */
-static struct mfd_cell msic_devs[] = {
- [INTEL_MSIC_BLOCK_TOUCH] = {
- .name = "msic_touch",
- .num_resources = ARRAY_SIZE(msic_touch_resources),
- .resources = msic_touch_resources,
- },
- [INTEL_MSIC_BLOCK_ADC] = {
- .name = "msic_adc",
- .num_resources = ARRAY_SIZE(msic_adc_resources),
- .resources = msic_adc_resources,
- },
- [INTEL_MSIC_BLOCK_BATTERY] = {
- .name = "msic_battery",
- .num_resources = ARRAY_SIZE(msic_battery_resources),
- .resources = msic_battery_resources,
- },
- [INTEL_MSIC_BLOCK_GPIO] = {
- .name = "msic_gpio",
- .num_resources = ARRAY_SIZE(msic_gpio_resources),
- .resources = msic_gpio_resources,
- },
- [INTEL_MSIC_BLOCK_AUDIO] = {
- .name = "msic_audio",
- .num_resources = ARRAY_SIZE(msic_audio_resources),
- .resources = msic_audio_resources,
- },
- [INTEL_MSIC_BLOCK_HDMI] = {
- .name = "msic_hdmi",
- .num_resources = ARRAY_SIZE(msic_hdmi_resources),
- .resources = msic_hdmi_resources,
- },
- [INTEL_MSIC_BLOCK_THERMAL] = {
- .name = "msic_thermal",
- .num_resources = ARRAY_SIZE(msic_thermal_resources),
- .resources = msic_thermal_resources,
- },
- [INTEL_MSIC_BLOCK_POWER_BTN] = {
- .name = "msic_power_btn",
- .num_resources = ARRAY_SIZE(msic_power_btn_resources),
- .resources = msic_power_btn_resources,
- },
- [INTEL_MSIC_BLOCK_OCD] = {
- .name = "msic_ocd",
- .num_resources = ARRAY_SIZE(msic_ocd_resources),
- .resources = msic_ocd_resources,
- },
-};
-
-/*
- * Other MSIC related devices which are not directly available via SFI DEVS
- * table. These can be pseudo devices, regulators etc. which are needed for
- * different purposes.
- *
- * These devices appear only after the MSIC driver itself is initialized so
- * we can guarantee that the SCU IPC interface is ready.
- */
-static const struct mfd_cell msic_other_devs[] = {
- /* Audio codec in the MSIC */
- {
- .id = -1,
- .name = "sn95031",
- },
-};
-
-/**
- * intel_msic_reg_read - read a single MSIC register
- * @reg: register to read
- * @val: register value is placed here
- *
- * Read a single register from MSIC. Returns %0 on success and negative
- * errno in case of failure.
- *
- * Function may sleep.
- */
-int intel_msic_reg_read(unsigned short reg, u8 *val)
-{
- return intel_scu_ipc_ioread8(reg, val);
-}
-EXPORT_SYMBOL_GPL(intel_msic_reg_read);
-
-/**
- * intel_msic_reg_write - write a single MSIC register
- * @reg: register to write
- * @val: value to write to that register
- *
- * Write a single MSIC register. Returns 0 on success and negative
- * errno in case of failure.
- *
- * Function may sleep.
- */
-int intel_msic_reg_write(unsigned short reg, u8 val)
-{
- return intel_scu_ipc_iowrite8(reg, val);
-}
-EXPORT_SYMBOL_GPL(intel_msic_reg_write);
-
-/**
- * intel_msic_reg_update - update a single MSIC register
- * @reg: register to update
- * @val: value to write to the register
- * @mask: specifies which of the bits are updated (%0 = don't update,
- * %1 = update)
- *
- * Perform an update to a register @reg. @mask is used to specify which
- * bits are updated. Returns %0 in case of success and negative errno in
- * case of failure.
- *
- * Function may sleep.
- */
-int intel_msic_reg_update(unsigned short reg, u8 val, u8 mask)
-{
- return intel_scu_ipc_update_register(reg, val, mask);
-}
-EXPORT_SYMBOL_GPL(intel_msic_reg_update);
-
-/**
- * intel_msic_bulk_read - read an array of registers
- * @reg: array of register addresses to read
- * @buf: array where the read values are placed
- * @count: number of registers to read
- *
- * Function reads @count registers from the MSIC using addresses passed in
- * @reg. Read values are placed in @buf. Reads are performed atomically
- * wrt. MSIC.
- *
- * Returns %0 in case of success and negative errno in case of failure.
- *
- * Function may sleep.
- */
-int intel_msic_bulk_read(unsigned short *reg, u8 *buf, size_t count)
-{
- if (WARN_ON(count > SCU_IPC_RWBUF_LIMIT))
- return -EINVAL;
-
- return intel_scu_ipc_readv(reg, buf, count);
-}
-EXPORT_SYMBOL_GPL(intel_msic_bulk_read);
-
-/**
- * intel_msic_bulk_write - write an array of values to the MSIC registers
- * @reg: array of registers to write
- * @buf: values to write to each register
- * @count: number of registers to write
- *
- * Function writes @count registers in @buf to MSIC. Writes are performed
- * atomically wrt MSIC. Returns %0 in case of success and negative errno in
- * case of failure.
- *
- * Function may sleep.
- */
-int intel_msic_bulk_write(unsigned short *reg, u8 *buf, size_t count)
-{
- if (WARN_ON(count > SCU_IPC_RWBUF_LIMIT))
- return -EINVAL;
-
- return intel_scu_ipc_writev(reg, buf, count);
-}
-EXPORT_SYMBOL_GPL(intel_msic_bulk_write);
-
-/**
- * intel_msic_irq_read - read a register from an MSIC interrupt tree
- * @msic: MSIC instance
- * @reg: interrupt register (between %INTEL_MSIC_IRQLVL1 and
- * %INTEL_MSIC_RESETIRQ2)
- * @val: value of the register is placed here
- *
- * This function can be used by an MSIC subdevice interrupt handler to read
- * a register value from the MSIC interrupt tree. In this way subdevice
- * drivers don't have to map in the interrupt tree themselves but can just
- * call this function instead.
- *
- * Function doesn't sleep and is callable from interrupt context.
- *
- * Returns %-EINVAL if @reg is outside of the allowed register region.
- */
-int intel_msic_irq_read(struct intel_msic *msic, unsigned short reg, u8 *val)
-{
- if (WARN_ON(reg < INTEL_MSIC_IRQLVL1 || reg > INTEL_MSIC_RESETIRQ2))
- return -EINVAL;
-
- *val = readb(msic->irq_base + (reg - INTEL_MSIC_IRQLVL1));
- return 0;
-}
-EXPORT_SYMBOL_GPL(intel_msic_irq_read);
-
-static int intel_msic_init_devices(struct intel_msic *msic)
-{
- struct platform_device *pdev = msic->pdev;
- struct intel_msic_platform_data *pdata = dev_get_platdata(&pdev->dev);
- int ret, i;
-
- if (pdata->gpio) {
- struct mfd_cell *cell = &msic_devs[INTEL_MSIC_BLOCK_GPIO];
-
- cell->platform_data = pdata->gpio;
- cell->pdata_size = sizeof(*pdata->gpio);
- }
-
- if (pdata->ocd) {
- unsigned gpio = pdata->ocd->gpio;
-
- ret = devm_gpio_request_one(&pdev->dev, gpio,
- GPIOF_IN, "ocd_gpio");
- if (ret) {
- dev_err(&pdev->dev, "failed to register OCD GPIO\n");
- return ret;
- }
-
- ret = gpio_to_irq(gpio);
- if (ret < 0) {
- dev_err(&pdev->dev, "no IRQ number for OCD GPIO\n");
- return ret;
- }
-
- /* Update the IRQ number for the OCD */
- pdata->irq[INTEL_MSIC_BLOCK_OCD] = ret;
- }
-
- for (i = 0; i < ARRAY_SIZE(msic_devs); i++) {
- if (!pdata->irq[i])
- continue;
-
- ret = mfd_add_devices(&pdev->dev, -1, &msic_devs[i], 1, NULL,
- pdata->irq[i], NULL);
- if (ret)
- goto fail;
- }
-
- ret = mfd_add_devices(&pdev->dev, 0, msic_other_devs,
- ARRAY_SIZE(msic_other_devs), NULL, 0, NULL);
- if (ret)
- goto fail;
-
- return 0;
-
-fail:
- mfd_remove_devices(&pdev->dev);
-
- return ret;
-}
-
-static void intel_msic_remove_devices(struct intel_msic *msic)
-{
- struct platform_device *pdev = msic->pdev;
-
- mfd_remove_devices(&pdev->dev);
-}
-
-static int intel_msic_probe(struct platform_device *pdev)
-{
- struct intel_msic_platform_data *pdata = dev_get_platdata(&pdev->dev);
- struct intel_msic *msic;
- struct resource *res;
- u8 id0, id1;
- int ret;
-
- if (!pdata) {
- dev_err(&pdev->dev, "no platform data passed\n");
- return -EINVAL;
- }
-
- /* First validate that we have an MSIC in place */
- ret = intel_scu_ipc_ioread8(INTEL_MSIC_ID0, &id0);
- if (ret) {
- dev_err(&pdev->dev, "failed to identify the MSIC chip (ID0)\n");
- return -ENXIO;
- }
-
- ret = intel_scu_ipc_ioread8(INTEL_MSIC_ID1, &id1);
- if (ret) {
- dev_err(&pdev->dev, "failed to identify the MSIC chip (ID1)\n");
- return -ENXIO;
- }
-
- if (MSIC_VENDOR(id0) != MSIC_VENDOR(id1)) {
- dev_err(&pdev->dev, "invalid vendor ID: %x, %x\n", id0, id1);
- return -ENXIO;
- }
-
- msic = devm_kzalloc(&pdev->dev, sizeof(*msic), GFP_KERNEL);
- if (!msic)
- return -ENOMEM;
-
- msic->vendor = MSIC_VENDOR(id0);
- msic->version = MSIC_VERSION(id0);
- msic->pdev = pdev;
-
- /*
- * Map in the MSIC interrupt tree area in SRAM. This is exposed to
- * the clients via intel_msic_irq_read().
- */
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- msic->irq_base = devm_ioremap_resource(&pdev->dev, res);
- if (IS_ERR(msic->irq_base))
- return PTR_ERR(msic->irq_base);
-
- platform_set_drvdata(pdev, msic);
-
- ret = intel_msic_init_devices(msic);
- if (ret) {
- dev_err(&pdev->dev, "failed to initialize MSIC devices\n");
- return ret;
- }
-
- dev_info(&pdev->dev, "Intel MSIC version %c%d (vendor %#x)\n",
- MSIC_MAJOR(msic->version), MSIC_MINOR(msic->version),
- msic->vendor);
-
- return 0;
-}
-
-static int intel_msic_remove(struct platform_device *pdev)
-{
- struct intel_msic *msic = platform_get_drvdata(pdev);
-
- intel_msic_remove_devices(msic);
-
- return 0;
-}
-
-static struct platform_driver intel_msic_driver = {
- .probe = intel_msic_probe,
- .remove = intel_msic_remove,
- .driver = {
- .name = "intel_msic",
- },
-};
-builtin_platform_driver(intel_msic_driver);
diff --git a/drivers/platform/x86/intel_scu_pcidrv.c b/drivers/platform/x86/intel_scu_pcidrv.c
index 8c5fd8240da9..80abc708e4f2 100644
--- a/drivers/platform/x86/intel_scu_pcidrv.c
+++ b/drivers/platform/x86/intel_scu_pcidrv.c
@@ -17,7 +17,6 @@
static int intel_scu_pci_probe(struct pci_dev *pdev,
const struct pci_device_id *id)
{
- void (*setup_fn)(void) = (void (*)(void))id->driver_data;
struct intel_scu_ipc_data scu_data = {};
struct intel_scu_ipc_dev *scu;
int ret;
@@ -30,27 +29,14 @@ static int intel_scu_pci_probe(struct pci_dev *pdev,
scu_data.irq = pdev->irq;
scu = intel_scu_ipc_register(&pdev->dev, &scu_data);
- if (IS_ERR(scu))
- return PTR_ERR(scu);
-
- if (setup_fn)
- setup_fn();
- return 0;
-}
-
-static void intel_mid_scu_setup(void)
-{
- intel_scu_devices_create();
+ return PTR_ERR_OR_ZERO(scu);
}
static const struct pci_device_id pci_ids[] = {
- { PCI_VDEVICE(INTEL, 0x080e),
- .driver_data = (kernel_ulong_t)intel_mid_scu_setup },
- { PCI_VDEVICE(INTEL, 0x08ea),
- .driver_data = (kernel_ulong_t)intel_mid_scu_setup },
+ { PCI_VDEVICE(INTEL, 0x080e) },
+ { PCI_VDEVICE(INTEL, 0x08ea) },
{ PCI_VDEVICE(INTEL, 0x0a94) },
- { PCI_VDEVICE(INTEL, 0x11a0),
- .driver_data = (kernel_ulong_t)intel_mid_scu_setup },
+ { PCI_VDEVICE(INTEL, 0x11a0) },
{ PCI_VDEVICE(INTEL, 0x1a94) },
{ PCI_VDEVICE(INTEL, 0x5a94) },
{}
diff --git a/drivers/sfi/Kconfig b/drivers/sfi/Kconfig
deleted file mode 100644
index 3d0b64db214e..000000000000
--- a/drivers/sfi/Kconfig
+++ /dev/null
@@ -1,18 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-#
-# SFI Configuration
-#
-
-menuconfig SFI
- bool "SFI (Simple Firmware Interface) Support"
- help
- The Simple Firmware Interface (SFI) provides a lightweight method
- for platform firmware to pass information to the operating system
- via static tables in memory. Kernel SFI support is required to
- boot on SFI-only platforms. Currently, all SFI-only platforms are
- based on the 2nd generation Intel Atom processor platform,
- code-named Moorestown.
-
- For more information, see http://simplefirmware.org
-
- Say 'Y' here to enable the kernel to boot on SFI-only platforms.
diff --git a/drivers/sfi/Makefile b/drivers/sfi/Makefile
deleted file mode 100644
index ca9436b12386..000000000000
--- a/drivers/sfi/Makefile
+++ /dev/null
@@ -1,4 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-obj-y += sfi_acpi.o
-obj-y += sfi_core.o
-
diff --git a/drivers/sfi/sfi_acpi.c b/drivers/sfi/sfi_acpi.c
deleted file mode 100644
index d277b36eb389..000000000000
--- a/drivers/sfi/sfi_acpi.c
+++ /dev/null
@@ -1,214 +0,0 @@
-/* sfi_acpi.c Simple Firmware Interface - ACPI extensions */
-
-/*
-
- This file is provided under a dual BSD/GPLv2 license. When using or
- redistributing this file, you may do so under either license.
-
- GPL LICENSE SUMMARY
-
- Copyright(c) 2009 Intel Corporation. All rights reserved.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of version 2 of the GNU General Public License as
- published by the Free Software Foundation.
-
- This program is distributed in the hope that it will be useful, but
- WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- The full GNU General Public License is included in this distribution
- in the file called LICENSE.GPL.
-
- BSD LICENSE
-
- Copyright(c) 2009 Intel Corporation. All rights reserved.
-
- Redistribution and use in source and binary forms, with or without
- modification, are permitted provided that the following conditions
- are met:
-
- * Redistributions of source code must retain the above copyright
- notice, this list of conditions and the following disclaimer.
- * Redistributions in binary form must reproduce the above copyright
- notice, this list of conditions and the following disclaimer in
- the documentation and/or other materials provided with the
- distribution.
- * Neither the name of Intel Corporation nor the names of its
- contributors may be used to endorse or promote products derived
- from this software without specific prior written permission.
-
- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-*/
-
-#define KMSG_COMPONENT "SFI"
-#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
-
-#include <linux/kernel.h>
-#include <linux/sfi_acpi.h>
-#include "sfi_core.h"
-
-/*
- * SFI can access ACPI-defined tables via an optional ACPI XSDT.
- *
- * This allows re-use, and avoids re-definition, of standard tables.
- * For example, the "MCFG" table is defined by PCI, reserved by ACPI,
- * and is expected to be present many SFI-only systems.
- */
-
-static struct acpi_table_xsdt *xsdt_va __read_mostly;
-
-#define XSDT_GET_NUM_ENTRIES(ptable, entry_type) \
- ((ptable->header.length - sizeof(struct acpi_table_header)) / \
- (sizeof(entry_type)))
-
-static inline struct sfi_table_header *acpi_to_sfi_th(
- struct acpi_table_header *th)
-{
- return (struct sfi_table_header *)th;
-}
-
-static inline struct acpi_table_header *sfi_to_acpi_th(
- struct sfi_table_header *th)
-{
- return (struct acpi_table_header *)th;
-}
-
-/*
- * sfi_acpi_parse_xsdt()
- *
- * Parse the ACPI XSDT for later access by sfi_acpi_table_parse().
- */
-static int __init sfi_acpi_parse_xsdt(struct sfi_table_header *th)
-{
- struct sfi_table_key key = SFI_ANY_KEY;
- int tbl_cnt, i;
- void *ret;
-
- xsdt_va = (struct acpi_table_xsdt *)th;
- tbl_cnt = XSDT_GET_NUM_ENTRIES(xsdt_va, u64);
- for (i = 0; i < tbl_cnt; i++) {
- ret = sfi_check_table(xsdt_va->table_offset_entry[i], &key);
- if (IS_ERR(ret)) {
- disable_sfi();
- return -1;
- }
- }
-
- return 0;
-}
-
-int __init sfi_acpi_init(void)
-{
- struct sfi_table_key xsdt_key = { .sig = SFI_SIG_XSDT };
-
- sfi_table_parse(SFI_SIG_XSDT, NULL, NULL, sfi_acpi_parse_xsdt);
-
- /* Only call the get_table to keep the table mapped */
- xsdt_va = (struct acpi_table_xsdt *)sfi_get_table(&xsdt_key);
- return 0;
-}
-
-static struct acpi_table_header *sfi_acpi_get_table(struct sfi_table_key *key)
-{
- u32 tbl_cnt, i;
- void *ret;
-
- tbl_cnt = XSDT_GET_NUM_ENTRIES(xsdt_va, u64);
- for (i = 0; i < tbl_cnt; i++) {
- ret = sfi_check_table(xsdt_va->table_offset_entry[i], key);
- if (!IS_ERR(ret) && ret)
- return sfi_to_acpi_th(ret);
- }
-
- return NULL;
-}
-
-static void sfi_acpi_put_table(struct acpi_table_header *table)
-{
- sfi_put_table(acpi_to_sfi_th(table));
-}
-
-/*
- * sfi_acpi_table_parse()
- *
- * Find specified table in XSDT, run handler on it and return its return value
- */
-int sfi_acpi_table_parse(char *signature, char *oem_id, char *oem_table_id,
- int(*handler)(struct acpi_table_header *))
-{
- struct acpi_table_header *table = NULL;
- struct sfi_table_key key;
- int ret = 0;
-
- if (sfi_disabled)
- return -1;
-
- key.sig = signature;
- key.oem_id = oem_id;
- key.oem_table_id = oem_table_id;
-
- table = sfi_acpi_get_table(&key);
- if (!table)
- return -EINVAL;
-
- ret = handler(table);
- sfi_acpi_put_table(table);
- return ret;
-}
-
-static ssize_t sfi_acpi_table_show(struct file *filp, struct kobject *kobj,
- struct bin_attribute *bin_attr, char *buf,
- loff_t offset, size_t count)
-{
- struct sfi_table_attr *tbl_attr =
- container_of(bin_attr, struct sfi_table_attr, attr);
- struct acpi_table_header *th = NULL;
- struct sfi_table_key key;
- ssize_t cnt;
-
- key.sig = tbl_attr->name;
- key.oem_id = NULL;
- key.oem_table_id = NULL;
-
- th = sfi_acpi_get_table(&key);
- if (!th)
- return 0;
-
- cnt = memory_read_from_buffer(buf, count, &offset,
- th, th->length);
- sfi_acpi_put_table(th);
-
- return cnt;
-}
-
-
-void __init sfi_acpi_sysfs_init(void)
-{
- u32 tbl_cnt, i;
- struct sfi_table_attr *tbl_attr;
-
- tbl_cnt = XSDT_GET_NUM_ENTRIES(xsdt_va, u64);
- for (i = 0; i < tbl_cnt; i++) {
- tbl_attr =
- sfi_sysfs_install_table(xsdt_va->table_offset_entry[i]);
- tbl_attr->attr.read = sfi_acpi_table_show;
- }
-
- return;
-}
diff --git a/drivers/sfi/sfi_core.c b/drivers/sfi/sfi_core.c
deleted file mode 100644
index a5136901dd8a..000000000000
--- a/drivers/sfi/sfi_core.c
+++ /dev/null
@@ -1,522 +0,0 @@
-/* sfi_core.c Simple Firmware Interface - core internals */
-
-/*
-
- This file is provided under a dual BSD/GPLv2 license. When using or
- redistributing this file, you may do so under either license.
-
- GPL LICENSE SUMMARY
-
- Copyright(c) 2009 Intel Corporation. All rights reserved.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of version 2 of the GNU General Public License as
- published by the Free Software Foundation.
-
- This program is distributed in the hope that it will be useful, but
- WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- The full GNU General Public License is included in this distribution
- in the file called LICENSE.GPL.
-
- BSD LICENSE
-
- Copyright(c) 2009 Intel Corporation. All rights reserved.
-
- Redistribution and use in source and binary forms, with or without
- modification, are permitted provided that the following conditions
- are met:
-
- * Redistributions of source code must retain the above copyright
- notice, this list of conditions and the following disclaimer.
- * Redistributions in binary form must reproduce the above copyright
- notice, this list of conditions and the following disclaimer in
- the documentation and/or other materials provided with the
- distribution.
- * Neither the name of Intel Corporation nor the names of its
- contributors may be used to endorse or promote products derived
- from this software without specific prior written permission.
-
- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-*/
-
-#define KMSG_COMPONENT "SFI"
-#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
-
-#include <linux/memblock.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/types.h>
-#include <linux/acpi.h>
-#include <linux/init.h>
-#include <linux/sfi.h>
-#include <linux/slab.h>
-#include <linux/io.h>
-
-#include "sfi_core.h"
-
-#define ON_SAME_PAGE(addr1, addr2) \
- (((unsigned long)(addr1) & PAGE_MASK) == \
- ((unsigned long)(addr2) & PAGE_MASK))
-#define TABLE_ON_PAGE(page, table, size) (ON_SAME_PAGE(page, table) && \
- ON_SAME_PAGE(page, table + size))
-
-int sfi_disabled __read_mostly;
-EXPORT_SYMBOL(sfi_disabled);
-
-static u64 syst_pa __read_mostly;
-static struct sfi_table_simple *syst_va __read_mostly;
-
-/*
- * FW creates and saves the SFI tables in memory. When these tables get
- * used, they may need to be mapped to virtual address space, and the mapping
- * can happen before or after the memremap() is ready, so a flag is needed
- * to indicating this
- */
-static u32 sfi_use_memremap __read_mostly;
-
-/*
- * sfi_un/map_memory calls early_memremap/memunmap which is a __init function
- * and introduces section mismatch. So use __ref to make it calm.
- */
-static void __iomem * __ref sfi_map_memory(u64 phys, u32 size)
-{
- if (!phys || !size)
- return NULL;
-
- if (sfi_use_memremap)
- return memremap(phys, size, MEMREMAP_WB);
- else
- return early_memremap(phys, size);
-}
-
-static void __ref sfi_unmap_memory(void __iomem *virt, u32 size)
-{
- if (!virt || !size)
- return;
-
- if (sfi_use_memremap)
- memunmap(virt);
- else
- early_memunmap(virt, size);
-}
-
-static void sfi_print_table_header(unsigned long long pa,
- struct sfi_table_header *header)
-{
- pr_info("%4.4s %llX, %04X (v%d %6.6s %8.8s)\n",
- header->sig, pa,
- header->len, header->rev, header->oem_id,
- header->oem_table_id);
-}
-
-/*
- * sfi_verify_table()
- * Sanity check table lengh, calculate checksum
- */
-static int sfi_verify_table(struct sfi_table_header *table)
-{
-
- u8 checksum = 0;
- u8 *puchar = (u8 *)table;
- u32 length = table->len;
-
- /* Sanity check table length against arbitrary 1MB limit */
- if (length > 0x100000) {
- pr_err("Invalid table length 0x%x\n", length);
- return -1;
- }
-
- while (length--)
- checksum += *puchar++;
-
- if (checksum) {
- pr_err("Checksum %2.2X should be %2.2X\n",
- table->csum, table->csum - checksum);
- return -1;
- }
- return 0;
-}
-
-/*
- * sfi_map_table()
- *
- * Return address of mapped table
- * Check for common case that we can re-use mapping to SYST,
- * which requires syst_pa, syst_va to be initialized.
- */
-static struct sfi_table_header *sfi_map_table(u64 pa)
-{
- struct sfi_table_header *th;
- u32 length;
-
- if (!TABLE_ON_PAGE(syst_pa, pa, sizeof(struct sfi_table_header)))
- th = sfi_map_memory(pa, sizeof(struct sfi_table_header));
- else
- th = (void *)syst_va + (pa - syst_pa);
-
- /* If table fits on same page as its header, we are done */
- if (TABLE_ON_PAGE(th, th, th->len))
- return th;
-
- /* Entire table does not fit on same page as SYST */
- length = th->len;
- if (!TABLE_ON_PAGE(syst_pa, pa, sizeof(struct sfi_table_header)))
- sfi_unmap_memory(th, sizeof(struct sfi_table_header));
-
- return sfi_map_memory(pa, length);
-}
-
-/*
- * sfi_unmap_table()
- *
- * Undoes effect of sfi_map_table() by unmapping table
- * if it did not completely fit on same page as SYST.
- */
-static void sfi_unmap_table(struct sfi_table_header *th)
-{
- if (!TABLE_ON_PAGE(syst_va, th, th->len))
- sfi_unmap_memory(th, TABLE_ON_PAGE(th, th, th->len) ?
- sizeof(*th) : th->len);
-}
-
-static int sfi_table_check_key(struct sfi_table_header *th,
- struct sfi_table_key *key)
-{
-
- if (strncmp(th->sig, key->sig, SFI_SIGNATURE_SIZE)
- || (key->oem_id && strncmp(th->oem_id,
- key->oem_id, SFI_OEM_ID_SIZE))
- || (key->oem_table_id && strncmp(th->oem_table_id,
- key->oem_table_id, SFI_OEM_TABLE_ID_SIZE)))
- return -1;
-
- return 0;
-}
-
-/*
- * This function will be used in 2 cases:
- * 1. used to enumerate and verify the tables addressed by SYST/XSDT,
- * thus no signature will be given (in kernel boot phase)
- * 2. used to parse one specific table, signature must exist, and
- * the mapped virt address will be returned, and the virt space
- * will be released by call sfi_put_table() later
- *
- * This two cases are from two different functions with two different
- * sections and causes section mismatch warning. So use __ref to tell
- * modpost not to make any noise.
- *
- * Return value:
- * NULL: when can't find a table matching the key
- * ERR_PTR(error): error value
- * virt table address: when a matched table is found
- */
-struct sfi_table_header *
- __ref sfi_check_table(u64 pa, struct sfi_table_key *key)
-{
- struct sfi_table_header *th;
- void *ret = NULL;
-
- th = sfi_map_table(pa);
- if (!th)
- return ERR_PTR(-ENOMEM);
-
- if (!key->sig) {
- sfi_print_table_header(pa, th);
- if (sfi_verify_table(th))
- ret = ERR_PTR(-EINVAL);
- } else {
- if (!sfi_table_check_key(th, key))
- return th; /* Success */
- }
-
- sfi_unmap_table(th);
- return ret;
-}
-
-/*
- * sfi_get_table()
- *
- * Search SYST for the specified table with the signature in
- * the key, and return the mapped table
- */
-struct sfi_table_header *sfi_get_table(struct sfi_table_key *key)
-{
- struct sfi_table_header *th;
- u32 tbl_cnt, i;
-
- tbl_cnt = SFI_GET_NUM_ENTRIES(syst_va, u64);
- for (i = 0; i < tbl_cnt; i++) {
- th = sfi_check_table(syst_va->pentry[i], key);
- if (!IS_ERR(th) && th)
- return th;
- }
-
- return NULL;
-}
-
-void sfi_put_table(struct sfi_table_header *th)
-{
- sfi_unmap_table(th);
-}
-
-/* Find table with signature, run handler on it */
-int sfi_table_parse(char *signature, char *oem_id, char *oem_table_id,
- sfi_table_handler handler)
-{
- struct sfi_table_header *table = NULL;
- struct sfi_table_key key;
- int ret = -EINVAL;
-
- if (sfi_disabled || !handler || !signature)
- goto exit;
-
- key.sig = signature;
- key.oem_id = oem_id;
- key.oem_table_id = oem_table_id;
-
- table = sfi_get_table(&key);
- if (!table)
- goto exit;
-
- ret = handler(table);
- sfi_put_table(table);
-exit:
- return ret;
-}
-EXPORT_SYMBOL_GPL(sfi_table_parse);
-
-/*
- * sfi_parse_syst()
- * Checksum all the tables in SYST and print their headers
- *
- * success: set syst_va, return 0
- */
-static int __init sfi_parse_syst(void)
-{
- struct sfi_table_key key = SFI_ANY_KEY;
- int tbl_cnt, i;
- void *ret;
-
- syst_va = sfi_map_memory(syst_pa, sizeof(struct sfi_table_simple));
- if (!syst_va)
- return -ENOMEM;
-
- tbl_cnt = SFI_GET_NUM_ENTRIES(syst_va, u64);
- for (i = 0; i < tbl_cnt; i++) {
- ret = sfi_check_table(syst_va->pentry[i], &key);
- if (IS_ERR(ret))
- return PTR_ERR(ret);
- }
-
- return 0;
-}
-
-/*
- * The OS finds the System Table by searching 16-byte boundaries between
- * physical address 0x000E0000 and 0x000FFFFF. The OS shall search this region
- * starting at the low address and shall stop searching when the 1st valid SFI
- * System Table is found.
- *
- * success: set syst_pa, return 0
- * fail: return -1
- */
-static __init int sfi_find_syst(void)
-{
- unsigned long offset, len;
- void *start;
-
- len = SFI_SYST_SEARCH_END - SFI_SYST_SEARCH_BEGIN;
- start = sfi_map_memory(SFI_SYST_SEARCH_BEGIN, len);
- if (!start)
- return -1;
-
- for (offset = 0; offset < len; offset += 16) {
- struct sfi_table_header *syst_hdr;
-
- syst_hdr = start + offset;
- if (strncmp(syst_hdr->sig, SFI_SIG_SYST,
- SFI_SIGNATURE_SIZE))
- continue;
-
- if (syst_hdr->len > PAGE_SIZE)
- continue;
-
- sfi_print_table_header(SFI_SYST_SEARCH_BEGIN + offset,
- syst_hdr);
-
- if (sfi_verify_table(syst_hdr))
- continue;
-
- /*
- * Enforce SFI spec mandate that SYST reside within a page.
- */
- if (!ON_SAME_PAGE(syst_pa, syst_pa + syst_hdr->len)) {
- pr_info("SYST 0x%llx + 0x%x crosses page\n",
- syst_pa, syst_hdr->len);
- continue;
- }
-
- /* Success */
- syst_pa = SFI_SYST_SEARCH_BEGIN + offset;
- sfi_unmap_memory(start, len);
- return 0;
- }
-
- sfi_unmap_memory(start, len);
- return -1;
-}
-
-static struct kobject *sfi_kobj;
-static struct kobject *tables_kobj;
-
-static ssize_t sfi_table_show(struct file *filp, struct kobject *kobj,
- struct bin_attribute *bin_attr, char *buf,
- loff_t offset, size_t count)
-{
- struct sfi_table_attr *tbl_attr =
- container_of(bin_attr, struct sfi_table_attr, attr);
- struct sfi_table_header *th = NULL;
- struct sfi_table_key key;
- ssize_t cnt;
-
- key.sig = tbl_attr->name;
- key.oem_id = NULL;
- key.oem_table_id = NULL;
-
- if (strncmp(SFI_SIG_SYST, tbl_attr->name, SFI_SIGNATURE_SIZE)) {
- th = sfi_get_table(&key);
- if (!th)
- return 0;
-
- cnt = memory_read_from_buffer(buf, count, &offset,
- th, th->len);
- sfi_put_table(th);
- } else
- cnt = memory_read_from_buffer(buf, count, &offset,
- syst_va, syst_va->header.len);
-
- return cnt;
-}
-
-struct sfi_table_attr __init *sfi_sysfs_install_table(u64 pa)
-{
- struct sfi_table_attr *tbl_attr;
- struct sfi_table_header *th;
- int ret;
-
- tbl_attr = kzalloc(sizeof(struct sfi_table_attr), GFP_KERNEL);
- if (!tbl_attr)
- return NULL;
-
- th = sfi_map_table(pa);
- if (!th || !th->sig[0]) {
- kfree(tbl_attr);
- return NULL;
- }
-
- sysfs_attr_init(&tbl_attr->attr.attr);
- memcpy(tbl_attr->name, th->sig, SFI_SIGNATURE_SIZE);
-
- tbl_attr->attr.size = 0;
- tbl_attr->attr.read = sfi_table_show;
- tbl_attr->attr.attr.name = tbl_attr->name;
- tbl_attr->attr.attr.mode = 0400;
-
- ret = sysfs_create_bin_file(tables_kobj,
- &tbl_attr->attr);
- if (ret) {
- kfree(tbl_attr);
- tbl_attr = NULL;
- }
-
- sfi_unmap_table(th);
- return tbl_attr;
-}
-
-static int __init sfi_sysfs_init(void)
-{
- int tbl_cnt, i;
-
- if (sfi_disabled)
- return 0;
-
- sfi_kobj = kobject_create_and_add("sfi", firmware_kobj);
- if (!sfi_kobj)
- return 0;
-
- tables_kobj = kobject_create_and_add("tables", sfi_kobj);
- if (!tables_kobj) {
- kobject_put(sfi_kobj);
- return 0;
- }
-
- sfi_sysfs_install_table(syst_pa);
-
- tbl_cnt = SFI_GET_NUM_ENTRIES(syst_va, u64);
-
- for (i = 0; i < tbl_cnt; i++)
- sfi_sysfs_install_table(syst_va->pentry[i]);
-
- sfi_acpi_sysfs_init();
- kobject_uevent(sfi_kobj, KOBJ_ADD);
- kobject_uevent(tables_kobj, KOBJ_ADD);
- pr_info("SFI sysfs interfaces init success\n");
- return 0;
-}
-
-void __init sfi_init(void)
-{
- if (!acpi_disabled)
- disable_sfi();
-
- if (sfi_disabled)
- return;
-
- pr_info("Simple Firmware Interface v0.81 http://simplefirmware.org\n");
-
- if (sfi_find_syst() || sfi_parse_syst() || sfi_platform_init())
- disable_sfi();
-
- return;
-}
-
-void __init sfi_init_late(void)
-{
- int length;
-
- if (sfi_disabled)
- return;
-
- length = syst_va->header.len;
- sfi_unmap_memory(syst_va, sizeof(struct sfi_table_simple));
-
- /* Use memremap now after it is ready */
- sfi_use_memremap = 1;
- syst_va = sfi_map_memory(syst_pa, length);
-
- sfi_acpi_init();
-}
-
-/*
- * The reason we put it here because we need wait till the /sys/firmware
- * is setup, then our interface can be registered in /sys/firmware/sfi
- */
-core_initcall(sfi_sysfs_init);
diff --git a/drivers/sfi/sfi_core.h b/drivers/sfi/sfi_core.h
deleted file mode 100644
index 1d5cfe854cf7..000000000000
--- a/drivers/sfi/sfi_core.h
+++ /dev/null
@@ -1,81 +0,0 @@
-/* sfi_core.h Simple Firmware Interface, internal header */
-
-/*
-
- This file is provided under a dual BSD/GPLv2 license. When using or
- redistributing this file, you may do so under either license.
-
- GPL LICENSE SUMMARY
-
- Copyright(c) 2009 Intel Corporation. All rights reserved.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of version 2 of the GNU General Public License as
- published by the Free Software Foundation.
-
- This program is distributed in the hope that it will be useful, but
- WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- The full GNU General Public License is included in this distribution
- in the file called LICENSE.GPL.
-
- BSD LICENSE
-
- Copyright(c) 2009 Intel Corporation. All rights reserved.
-
- Redistribution and use in source and binary forms, with or without
- modification, are permitted provided that the following conditions
- are met:
-
- * Redistributions of source code must retain the above copyright
- notice, this list of conditions and the following disclaimer.
- * Redistributions in binary form must reproduce the above copyright
- notice, this list of conditions and the following disclaimer in
- the documentation and/or other materials provided with the
- distribution.
- * Neither the name of Intel Corporation nor the names of its
- contributors may be used to endorse or promote products derived
- from this software without specific prior written permission.
-
- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-*/
-
-#include <linux/sysfs.h>
-
-struct sfi_table_key{
- char *sig;
- char *oem_id;
- char *oem_table_id;
-};
-
-/* sysfs interface */
-struct sfi_table_attr {
- struct bin_attribute attr;
- char name[8];
-};
-
-#define SFI_ANY_KEY { .sig = NULL, .oem_id = NULL, .oem_table_id = NULL }
-
-extern int __init sfi_acpi_init(void);
-extern struct sfi_table_header *sfi_check_table(u64 paddr,
- struct sfi_table_key *key);
-struct sfi_table_header *sfi_get_table(struct sfi_table_key *key);
-extern void sfi_put_table(struct sfi_table_header *table);
-extern struct sfi_table_attr __init *sfi_sysfs_install_table(u64 pa);
-extern void __init sfi_acpi_sysfs_init(void);
diff --git a/drivers/staging/media/atomisp/include/linux/atomisp_platform.h b/drivers/staging/media/atomisp/include/linux/atomisp_platform.h
index 5a5121d958ed..8c65733e0255 100644
--- a/drivers/staging/media/atomisp/include/linux/atomisp_platform.h
+++ b/drivers/staging/media/atomisp/include/linux/atomisp_platform.h
@@ -22,7 +22,6 @@
#include <asm/processor.h>
#include <linux/i2c.h>
-#include <linux/sfi.h>
#include <media/v4l2-subdev.h>
#include "atomisp.h"
diff --git a/include/linux/mfd/intel_msic.h b/include/linux/mfd/intel_msic.h
deleted file mode 100644
index 317e8608cf41..000000000000
--- a/include/linux/mfd/intel_msic.h
+++ /dev/null
@@ -1,453 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Core interface for Intel MSIC
- *
- * Copyright (C) 2011, Intel Corporation
- * Author: Mika Westerberg <mika.westerberg@linux.intel.com>
- */
-
-#ifndef __LINUX_MFD_INTEL_MSIC_H__
-#define __LINUX_MFD_INTEL_MSIC_H__
-
-/* ID */
-#define INTEL_MSIC_ID0 0x000 /* RO */
-#define INTEL_MSIC_ID1 0x001 /* RO */
-
-/* IRQ */
-#define INTEL_MSIC_IRQLVL1 0x002
-#define INTEL_MSIC_ADC1INT 0x003
-#define INTEL_MSIC_CCINT 0x004
-#define INTEL_MSIC_PWRSRCINT 0x005
-#define INTEL_MSIC_PWRSRCINT1 0x006
-#define INTEL_MSIC_CHRINT 0x007
-#define INTEL_MSIC_CHRINT1 0x008
-#define INTEL_MSIC_RTCIRQ 0x009
-#define INTEL_MSIC_GPIO0LVIRQ 0x00a
-#define INTEL_MSIC_GPIO1LVIRQ 0x00b
-#define INTEL_MSIC_GPIOHVIRQ 0x00c
-#define INTEL_MSIC_VRINT 0x00d
-#define INTEL_MSIC_OCAUDIO 0x00e
-#define INTEL_MSIC_ACCDET 0x00f
-#define INTEL_MSIC_RESETIRQ1 0x010
-#define INTEL_MSIC_RESETIRQ2 0x011
-#define INTEL_MSIC_MADC1INT 0x012
-#define INTEL_MSIC_MCCINT 0x013
-#define INTEL_MSIC_MPWRSRCINT 0x014
-#define INTEL_MSIC_MPWRSRCINT1 0x015
-#define INTEL_MSIC_MCHRINT 0x016
-#define INTEL_MSIC_MCHRINT1 0x017
-#define INTEL_MSIC_RTCIRQMASK 0x018
-#define INTEL_MSIC_GPIO0LVIRQMASK 0x019
-#define INTEL_MSIC_GPIO1LVIRQMASK 0x01a
-#define INTEL_MSIC_GPIOHVIRQMASK 0x01b
-#define INTEL_MSIC_VRINTMASK 0x01c
-#define INTEL_MSIC_OCAUDIOMASK 0x01d
-#define INTEL_MSIC_ACCDETMASK 0x01e
-#define INTEL_MSIC_RESETIRQ1MASK 0x01f
-#define INTEL_MSIC_RESETIRQ2MASK 0x020
-#define INTEL_MSIC_IRQLVL1MSK 0x021
-#define INTEL_MSIC_PBCONFIG 0x03e
-#define INTEL_MSIC_PBSTATUS 0x03f /* RO */
-
-/* GPIO */
-#define INTEL_MSIC_GPIO0LV7CTLO 0x040
-#define INTEL_MSIC_GPIO0LV6CTLO 0x041
-#define INTEL_MSIC_GPIO0LV5CTLO 0x042
-#define INTEL_MSIC_GPIO0LV4CTLO 0x043
-#define INTEL_MSIC_GPIO0LV3CTLO 0x044
-#define INTEL_MSIC_GPIO0LV2CTLO 0x045
-#define INTEL_MSIC_GPIO0LV1CTLO 0x046
-#define INTEL_MSIC_GPIO0LV0CTLO 0x047
-#define INTEL_MSIC_GPIO1LV7CTLOS 0x048
-#define INTEL_MSIC_GPIO1LV6CTLO 0x049
-#define INTEL_MSIC_GPIO1LV5CTLO 0x04a
-#define INTEL_MSIC_GPIO1LV4CTLO 0x04b
-#define INTEL_MSIC_GPIO1LV3CTLO 0x04c
-#define INTEL_MSIC_GPIO1LV2CTLO 0x04d
-#define INTEL_MSIC_GPIO1LV1CTLO 0x04e
-#define INTEL_MSIC_GPIO1LV0CTLO 0x04f
-#define INTEL_MSIC_GPIO0LV7CTLI 0x050
-#define INTEL_MSIC_GPIO0LV6CTLI 0x051
-#define INTEL_MSIC_GPIO0LV5CTLI 0x052
-#define INTEL_MSIC_GPIO0LV4CTLI 0x053
-#define INTEL_MSIC_GPIO0LV3CTLI 0x054
-#define INTEL_MSIC_GPIO0LV2CTLI 0x055
-#define INTEL_MSIC_GPIO0LV1CTLI 0x056
-#define INTEL_MSIC_GPIO0LV0CTLI 0x057
-#define INTEL_MSIC_GPIO1LV7CTLIS 0x058
-#define INTEL_MSIC_GPIO1LV6CTLI 0x059
-#define INTEL_MSIC_GPIO1LV5CTLI 0x05a
-#define INTEL_MSIC_GPIO1LV4CTLI 0x05b
-#define INTEL_MSIC_GPIO1LV3CTLI 0x05c
-#define INTEL_MSIC_GPIO1LV2CTLI 0x05d
-#define INTEL_MSIC_GPIO1LV1CTLI 0x05e
-#define INTEL_MSIC_GPIO1LV0CTLI 0x05f
-#define INTEL_MSIC_PWM0CLKDIV1 0x061
-#define INTEL_MSIC_PWM0CLKDIV0 0x062
-#define INTEL_MSIC_PWM1CLKDIV1 0x063
-#define INTEL_MSIC_PWM1CLKDIV0 0x064
-#define INTEL_MSIC_PWM2CLKDIV1 0x065
-#define INTEL_MSIC_PWM2CLKDIV0 0x066
-#define INTEL_MSIC_PWM0DUTYCYCLE 0x067
-#define INTEL_MSIC_PWM1DUTYCYCLE 0x068
-#define INTEL_MSIC_PWM2DUTYCYCLE 0x069
-#define INTEL_MSIC_GPIO0HV3CTLO 0x06d
-#define INTEL_MSIC_GPIO0HV2CTLO 0x06e
-#define INTEL_MSIC_GPIO0HV1CTLO 0x06f
-#define INTEL_MSIC_GPIO0HV0CTLO 0x070
-#define INTEL_MSIC_GPIO1HV3CTLO 0x071
-#define INTEL_MSIC_GPIO1HV2CTLO 0x072
-#define INTEL_MSIC_GPIO1HV1CTLO 0x073
-#define INTEL_MSIC_GPIO1HV0CTLO 0x074
-#define INTEL_MSIC_GPIO0HV3CTLI 0x075
-#define INTEL_MSIC_GPIO0HV2CTLI 0x076
-#define INTEL_MSIC_GPIO0HV1CTLI 0x077
-#define INTEL_MSIC_GPIO0HV0CTLI 0x078
-#define INTEL_MSIC_GPIO1HV3CTLI 0x079
-#define INTEL_MSIC_GPIO1HV2CTLI 0x07a
-#define INTEL_MSIC_GPIO1HV1CTLI 0x07b
-#define INTEL_MSIC_GPIO1HV0CTLI 0x07c
-
-/* SVID */
-#define INTEL_MSIC_SVIDCTRL0 0x080
-#define INTEL_MSIC_SVIDCTRL1 0x081
-#define INTEL_MSIC_SVIDCTRL2 0x082
-#define INTEL_MSIC_SVIDTXLASTPKT3 0x083 /* RO */
-#define INTEL_MSIC_SVIDTXLASTPKT2 0x084 /* RO */
-#define INTEL_MSIC_SVIDTXLASTPKT1 0x085 /* RO */
-#define INTEL_MSIC_SVIDTXLASTPKT0 0x086 /* RO */
-#define INTEL_MSIC_SVIDPKTOUTBYTE3 0x087
-#define INTEL_MSIC_SVIDPKTOUTBYTE2 0x088
-#define INTEL_MSIC_SVIDPKTOUTBYTE1 0x089
-#define INTEL_MSIC_SVIDPKTOUTBYTE0 0x08a
-#define INTEL_MSIC_SVIDRXVPDEBUG1 0x08b
-#define INTEL_MSIC_SVIDRXVPDEBUG0 0x08c
-#define INTEL_MSIC_SVIDRXLASTPKT3 0x08d /* RO */
-#define INTEL_MSIC_SVIDRXLASTPKT2 0x08e /* RO */
-#define INTEL_MSIC_SVIDRXLASTPKT1 0x08f /* RO */
-#define INTEL_MSIC_SVIDRXLASTPKT0 0x090 /* RO */
-#define INTEL_MSIC_SVIDRXCHKSTATUS3 0x091 /* RO */
-#define INTEL_MSIC_SVIDRXCHKSTATUS2 0x092 /* RO */
-#define INTEL_MSIC_SVIDRXCHKSTATUS1 0x093 /* RO */
-#define INTEL_MSIC_SVIDRXCHKSTATUS0 0x094 /* RO */
-
-/* VREG */
-#define INTEL_MSIC_VCCLATCH 0x0c0
-#define INTEL_MSIC_VNNLATCH 0x0c1
-#define INTEL_MSIC_VCCCNT 0x0c2
-#define INTEL_MSIC_SMPSRAMP 0x0c3
-#define INTEL_MSIC_VNNCNT 0x0c4
-#define INTEL_MSIC_VNNAONCNT 0x0c5
-#define INTEL_MSIC_VCC122AONCNT 0x0c6
-#define INTEL_MSIC_V180AONCNT 0x0c7
-#define INTEL_MSIC_V500CNT 0x0c8
-#define INTEL_MSIC_VIHFCNT 0x0c9
-#define INTEL_MSIC_LDORAMP1 0x0ca
-#define INTEL_MSIC_LDORAMP2 0x0cb
-#define INTEL_MSIC_VCC108AONCNT 0x0cc
-#define INTEL_MSIC_VCC108ASCNT 0x0cd
-#define INTEL_MSIC_VCC108CNT 0x0ce
-#define INTEL_MSIC_VCCA100ASCNT 0x0cf
-#define INTEL_MSIC_VCCA100CNT 0x0d0
-#define INTEL_MSIC_VCC180AONCNT 0x0d1
-#define INTEL_MSIC_VCC180CNT 0x0d2
-#define INTEL_MSIC_VCC330CNT 0x0d3
-#define INTEL_MSIC_VUSB330CNT 0x0d4
-#define INTEL_MSIC_VCCSDIOCNT 0x0d5
-#define INTEL_MSIC_VPROG1CNT 0x0d6
-#define INTEL_MSIC_VPROG2CNT 0x0d7
-#define INTEL_MSIC_VEMMCSCNT 0x0d8
-#define INTEL_MSIC_VEMMC1CNT 0x0d9
-#define INTEL_MSIC_VEMMC2CNT 0x0da
-#define INTEL_MSIC_VAUDACNT 0x0db
-#define INTEL_MSIC_VHSPCNT 0x0dc
-#define INTEL_MSIC_VHSNCNT 0x0dd
-#define INTEL_MSIC_VHDMICNT 0x0de
-#define INTEL_MSIC_VOTGCNT 0x0df
-#define INTEL_MSIC_V1P35CNT 0x0e0
-#define INTEL_MSIC_V330AONCNT 0x0e1
-
-/* RESET */
-#define INTEL_MSIC_CHIPCNTRL 0x100 /* WO */
-#define INTEL_MSIC_ERCONFIG 0x101
-
-/* BURST */
-#define INTEL_MSIC_BATCURRENTLIMIT12 0x102
-#define INTEL_MSIC_BATTIMELIMIT12 0x103
-#define INTEL_MSIC_BATTIMELIMIT3 0x104
-#define INTEL_MSIC_BATTIMEDB 0x105
-#define INTEL_MSIC_BRSTCONFIGOUTPUTS 0x106
-#define INTEL_MSIC_BRSTCONFIGACTIONS 0x107
-#define INTEL_MSIC_BURSTCONTROLSTATUS 0x108
-
-/* RTC */
-#define INTEL_MSIC_RTCB1 0x140 /* RO */
-#define INTEL_MSIC_RTCB2 0x141 /* RO */
-#define INTEL_MSIC_RTCB3 0x142 /* RO */
-#define INTEL_MSIC_RTCB4 0x143 /* RO */
-#define INTEL_MSIC_RTCOB1 0x144
-#define INTEL_MSIC_RTCOB2 0x145
-#define INTEL_MSIC_RTCOB3 0x146
-#define INTEL_MSIC_RTCOB4 0x147
-#define INTEL_MSIC_RTCAB1 0x148
-#define INTEL_MSIC_RTCAB2 0x149
-#define INTEL_MSIC_RTCAB3 0x14a
-#define INTEL_MSIC_RTCAB4 0x14b
-#define INTEL_MSIC_RTCWAB1 0x14c
-#define INTEL_MSIC_RTCWAB2 0x14d
-#define INTEL_MSIC_RTCWAB3 0x14e
-#define INTEL_MSIC_RTCWAB4 0x14f
-#define INTEL_MSIC_RTCSC1 0x150
-#define INTEL_MSIC_RTCSC2 0x151
-#define INTEL_MSIC_RTCSC3 0x152
-#define INTEL_MSIC_RTCSC4 0x153
-#define INTEL_MSIC_RTCSTATUS 0x154 /* RO */
-#define INTEL_MSIC_RTCCONFIG1 0x155
-#define INTEL_MSIC_RTCCONFIG2 0x156
-
-/* CHARGER */
-#define INTEL_MSIC_BDTIMER 0x180
-#define INTEL_MSIC_BATTRMV 0x181
-#define INTEL_MSIC_VBUSDET 0x182
-#define INTEL_MSIC_VBUSDET1 0x183
-#define INTEL_MSIC_ADPHVDET 0x184
-#define INTEL_MSIC_ADPLVDET 0x185
-#define INTEL_MSIC_ADPDETDBDM 0x186
-#define INTEL_MSIC_LOWBATTDET 0x187
-#define INTEL_MSIC_CHRCTRL 0x188
-#define INTEL_MSIC_CHRCVOLTAGE 0x189
-#define INTEL_MSIC_CHRCCURRENT 0x18a
-#define INTEL_MSIC_SPCHARGER 0x18b
-#define INTEL_MSIC_CHRTTIME 0x18c
-#define INTEL_MSIC_CHRCTRL1 0x18d
-#define INTEL_MSIC_PWRSRCLMT 0x18e
-#define INTEL_MSIC_CHRSTWDT 0x18f
-#define INTEL_MSIC_WDTWRITE 0x190 /* WO */
-#define INTEL_MSIC_CHRSAFELMT 0x191
-#define INTEL_MSIC_SPWRSRCINT 0x192 /* RO */
-#define INTEL_MSIC_SPWRSRCINT1 0x193 /* RO */
-#define INTEL_MSIC_CHRLEDPWM 0x194
-#define INTEL_MSIC_CHRLEDCTRL 0x195
-
-/* ADC */
-#define INTEL_MSIC_ADC1CNTL1 0x1c0
-#define INTEL_MSIC_ADC1CNTL2 0x1c1
-#define INTEL_MSIC_ADC1CNTL3 0x1c2
-#define INTEL_MSIC_ADC1OFFSETH 0x1c3 /* RO */
-#define INTEL_MSIC_ADC1OFFSETL 0x1c4 /* RO */
-#define INTEL_MSIC_ADC1ADDR0 0x1c5
-#define INTEL_MSIC_ADC1ADDR1 0x1c6
-#define INTEL_MSIC_ADC1ADDR2 0x1c7
-#define INTEL_MSIC_ADC1ADDR3 0x1c8
-#define INTEL_MSIC_ADC1ADDR4 0x1c9
-#define INTEL_MSIC_ADC1ADDR5 0x1ca
-#define INTEL_MSIC_ADC1ADDR6 0x1cb
-#define INTEL_MSIC_ADC1ADDR7 0x1cc
-#define INTEL_MSIC_ADC1ADDR8 0x1cd
-#define INTEL_MSIC_ADC1ADDR9 0x1ce
-#define INTEL_MSIC_ADC1ADDR10 0x1cf
-#define INTEL_MSIC_ADC1ADDR11 0x1d0
-#define INTEL_MSIC_ADC1ADDR12 0x1d1
-#define INTEL_MSIC_ADC1ADDR13 0x1d2
-#define INTEL_MSIC_ADC1ADDR14 0x1d3
-#define INTEL_MSIC_ADC1SNS0H 0x1d4 /* RO */
-#define INTEL_MSIC_ADC1SNS0L 0x1d5 /* RO */
-#define INTEL_MSIC_ADC1SNS1H 0x1d6 /* RO */
-#define INTEL_MSIC_ADC1SNS1L 0x1d7 /* RO */
-#define INTEL_MSIC_ADC1SNS2H 0x1d8 /* RO */
-#define INTEL_MSIC_ADC1SNS2L 0x1d9 /* RO */
-#define INTEL_MSIC_ADC1SNS3H 0x1da /* RO */
-#define INTEL_MSIC_ADC1SNS3L 0x1db /* RO */
-#define INTEL_MSIC_ADC1SNS4H 0x1dc /* RO */
-#define INTEL_MSIC_ADC1SNS4L 0x1dd /* RO */
-#define INTEL_MSIC_ADC1SNS5H 0x1de /* RO */
-#define INTEL_MSIC_ADC1SNS5L 0x1df /* RO */
-#define INTEL_MSIC_ADC1SNS6H 0x1e0 /* RO */
-#define INTEL_MSIC_ADC1SNS6L 0x1e1 /* RO */
-#define INTEL_MSIC_ADC1SNS7H 0x1e2 /* RO */
-#define INTEL_MSIC_ADC1SNS7L 0x1e3 /* RO */
-#define INTEL_MSIC_ADC1SNS8H 0x1e4 /* RO */
-#define INTEL_MSIC_ADC1SNS8L 0x1e5 /* RO */
-#define INTEL_MSIC_ADC1SNS9H 0x1e6 /* RO */
-#define INTEL_MSIC_ADC1SNS9L 0x1e7 /* RO */
-#define INTEL_MSIC_ADC1SNS10H 0x1e8 /* RO */
-#define INTEL_MSIC_ADC1SNS10L 0x1e9 /* RO */
-#define INTEL_MSIC_ADC1SNS11H 0x1ea /* RO */
-#define INTEL_MSIC_ADC1SNS11L 0x1eb /* RO */
-#define INTEL_MSIC_ADC1SNS12H 0x1ec /* RO */
-#define INTEL_MSIC_ADC1SNS12L 0x1ed /* RO */
-#define INTEL_MSIC_ADC1SNS13H 0x1ee /* RO */
-#define INTEL_MSIC_ADC1SNS13L 0x1ef /* RO */
-#define INTEL_MSIC_ADC1SNS14H 0x1f0 /* RO */
-#define INTEL_MSIC_ADC1SNS14L 0x1f1 /* RO */
-#define INTEL_MSIC_ADC1BV0H 0x1f2 /* RO */
-#define INTEL_MSIC_ADC1BV0L 0x1f3 /* RO */
-#define INTEL_MSIC_ADC1BV1H 0x1f4 /* RO */
-#define INTEL_MSIC_ADC1BV1L 0x1f5 /* RO */
-#define INTEL_MSIC_ADC1BV2H 0x1f6 /* RO */
-#define INTEL_MSIC_ADC1BV2L 0x1f7 /* RO */
-#define INTEL_MSIC_ADC1BV3H 0x1f8 /* RO */
-#define INTEL_MSIC_ADC1BV3L 0x1f9 /* RO */
-#define INTEL_MSIC_ADC1BI0H 0x1fa /* RO */
-#define INTEL_MSIC_ADC1BI0L 0x1fb /* RO */
-#define INTEL_MSIC_ADC1BI1H 0x1fc /* RO */
-#define INTEL_MSIC_ADC1BI1L 0x1fd /* RO */
-#define INTEL_MSIC_ADC1BI2H 0x1fe /* RO */
-#define INTEL_MSIC_ADC1BI2L 0x1ff /* RO */
-#define INTEL_MSIC_ADC1BI3H 0x200 /* RO */
-#define INTEL_MSIC_ADC1BI3L 0x201 /* RO */
-#define INTEL_MSIC_CCCNTL 0x202
-#define INTEL_MSIC_CCOFFSETH 0x203 /* RO */
-#define INTEL_MSIC_CCOFFSETL 0x204 /* RO */
-#define INTEL_MSIC_CCADCHA 0x205 /* RO */
-#define INTEL_MSIC_CCADCLA 0x206 /* RO */
-
-/* AUDIO */
-#define INTEL_MSIC_AUDPLLCTRL 0x240
-#define INTEL_MSIC_DMICBUF0123 0x241
-#define INTEL_MSIC_DMICBUF45 0x242
-#define INTEL_MSIC_DMICGPO 0x244
-#define INTEL_MSIC_DMICMUX 0x245
-#define INTEL_MSIC_DMICCLK 0x246
-#define INTEL_MSIC_MICBIAS 0x247
-#define INTEL_MSIC_ADCCONFIG 0x248
-#define INTEL_MSIC_MICAMP1 0x249
-#define INTEL_MSIC_MICAMP2 0x24a
-#define INTEL_MSIC_NOISEMUX 0x24b
-#define INTEL_MSIC_AUDIOMUX12 0x24c
-#define INTEL_MSIC_AUDIOMUX34 0x24d
-#define INTEL_MSIC_AUDIOSINC 0x24e
-#define INTEL_MSIC_AUDIOTXEN 0x24f
-#define INTEL_MSIC_HSEPRXCTRL 0x250
-#define INTEL_MSIC_IHFRXCTRL 0x251
-#define INTEL_MSIC_VOICETXVOL 0x252
-#define INTEL_MSIC_SIDETONEVOL 0x253
-#define INTEL_MSIC_MUSICSHARVOL 0x254
-#define INTEL_MSIC_VOICETXCTRL 0x255
-#define INTEL_MSIC_HSMIXER 0x256
-#define INTEL_MSIC_DACCONFIG 0x257
-#define INTEL_MSIC_SOFTMUTE 0x258
-#define INTEL_MSIC_HSLVOLCTRL 0x259
-#define INTEL_MSIC_HSRVOLCTRL 0x25a
-#define INTEL_MSIC_IHFLVOLCTRL 0x25b
-#define INTEL_MSIC_IHFRVOLCTRL 0x25c
-#define INTEL_MSIC_DRIVEREN 0x25d
-#define INTEL_MSIC_LINEOUTCTRL 0x25e
-#define INTEL_MSIC_VIB1CTRL1 0x25f
-#define INTEL_MSIC_VIB1CTRL2 0x260
-#define INTEL_MSIC_VIB1CTRL3 0x261
-#define INTEL_MSIC_VIB1SPIPCM_1 0x262
-#define INTEL_MSIC_VIB1SPIPCM_2 0x263
-#define INTEL_MSIC_VIB1CTRL5 0x264
-#define INTEL_MSIC_VIB2CTRL1 0x265
-#define INTEL_MSIC_VIB2CTRL2 0x266
-#define INTEL_MSIC_VIB2CTRL3 0x267
-#define INTEL_MSIC_VIB2SPIPCM_1 0x268
-#define INTEL_MSIC_VIB2SPIPCM_2 0x269
-#define INTEL_MSIC_VIB2CTRL5 0x26a
-#define INTEL_MSIC_BTNCTRL1 0x26b
-#define INTEL_MSIC_BTNCTRL2 0x26c
-#define INTEL_MSIC_PCM1TXSLOT01 0x26d
-#define INTEL_MSIC_PCM1TXSLOT23 0x26e
-#define INTEL_MSIC_PCM1TXSLOT45 0x26f
-#define INTEL_MSIC_PCM1RXSLOT0123 0x270
-#define INTEL_MSIC_PCM1RXSLOT045 0x271
-#define INTEL_MSIC_PCM2TXSLOT01 0x272
-#define INTEL_MSIC_PCM2TXSLOT23 0x273
-#define INTEL_MSIC_PCM2TXSLOT45 0x274
-#define INTEL_MSIC_PCM2RXSLOT01 0x275
-#define INTEL_MSIC_PCM2RXSLOT23 0x276
-#define INTEL_MSIC_PCM2RXSLOT45 0x277
-#define INTEL_MSIC_PCM1CTRL1 0x278
-#define INTEL_MSIC_PCM1CTRL2 0x279
-#define INTEL_MSIC_PCM1CTRL3 0x27a
-#define INTEL_MSIC_PCM2CTRL1 0x27b
-#define INTEL_MSIC_PCM2CTRL2 0x27c
-
-/* HDMI */
-#define INTEL_MSIC_HDMIPUEN 0x280
-#define INTEL_MSIC_HDMISTATUS 0x281 /* RO */
-
-/* Physical address of the start of the MSIC interrupt tree in SRAM */
-#define INTEL_MSIC_IRQ_PHYS_BASE 0xffff7fc0
-
-/**
- * struct intel_msic_gpio_pdata - platform data for the MSIC GPIO driver
- * @gpio_base: base number for the GPIOs
- */
-struct intel_msic_gpio_pdata {
- unsigned gpio_base;
-};
-
-/**
- * struct intel_msic_ocd_pdata - platform data for the MSIC OCD driver
- * @gpio: GPIO number used for OCD interrupts
- *
- * The MSIC MFD driver converts @gpio into an IRQ number and passes it to
- * the OCD driver as %IORESOURCE_IRQ.
- */
-struct intel_msic_ocd_pdata {
- unsigned gpio;
-};
-
-/* MSIC embedded blocks (subdevices) */
-enum intel_msic_block {
- INTEL_MSIC_BLOCK_TOUCH,
- INTEL_MSIC_BLOCK_ADC,
- INTEL_MSIC_BLOCK_BATTERY,
- INTEL_MSIC_BLOCK_GPIO,
- INTEL_MSIC_BLOCK_AUDIO,
- INTEL_MSIC_BLOCK_HDMI,
- INTEL_MSIC_BLOCK_THERMAL,
- INTEL_MSIC_BLOCK_POWER_BTN,
- INTEL_MSIC_BLOCK_OCD,
-
- INTEL_MSIC_BLOCK_LAST,
-};
-
-/**
- * struct intel_msic_platform_data - platform data for the MSIC driver
- * @irq: array of interrupt numbers, one per device. If @irq is set to %0
- * for a given block, the corresponding platform device is not
- * created. For devices which don't have an interrupt, use %0xff
- * (this is same as in SFI spec).
- * @gpio: platform data for the MSIC GPIO driver
- * @ocd: platform data for the MSIC OCD driver
- *
- * Once the MSIC driver is initialized, the register interface is ready to
- * use. All the platform devices for subdevices are created after the
- * register interface is ready so that we can guarantee its availability to
- * the subdevice drivers.
- *
- * Interrupt numbers are passed to the subdevices via %IORESOURCE_IRQ
- * resources of the created platform device.
- */
-struct intel_msic_platform_data {
- int irq[INTEL_MSIC_BLOCK_LAST];
- struct intel_msic_gpio_pdata *gpio;
- struct intel_msic_ocd_pdata *ocd;
-};
-
-struct intel_msic;
-
-extern int intel_msic_reg_read(unsigned short reg, u8 *val);
-extern int intel_msic_reg_write(unsigned short reg, u8 val);
-extern int intel_msic_reg_update(unsigned short reg, u8 val, u8 mask);
-extern int intel_msic_bulk_read(unsigned short *reg, u8 *buf, size_t count);
-extern int intel_msic_bulk_write(unsigned short *reg, u8 *buf, size_t count);
-
-/*
- * pdev_to_intel_msic - gets an MSIC instance from the platform device
- * @pdev: platform device pointer
- *
- * The client drivers need to have pointer to the MSIC instance if they
- * want to call intel_msic_irq_read(). This macro can be used for
- * convenience to get the MSIC pointer from @pdev where needed. This is
- * _only_ valid for devices which are managed by the MSIC.
- */
-#define pdev_to_intel_msic(pdev) (dev_get_drvdata(pdev->dev.parent))
-
-extern int intel_msic_irq_read(struct intel_msic *msic, unsigned short reg,
- u8 *val);
-
-#endif /* __LINUX_MFD_INTEL_MSIC_H__ */
diff --git a/include/linux/sfi.h b/include/linux/sfi.h
deleted file mode 100644
index e0e1597ef9e6..000000000000
--- a/include/linux/sfi.h
+++ /dev/null
@@ -1,210 +0,0 @@
-/* sfi.h Simple Firmware Interface */
-
-/*
-
- This file is provided under a dual BSD/GPLv2 license. When using or
- redistributing this file, you may do so under either license.
-
- GPL LICENSE SUMMARY
-
- Copyright(c) 2009 Intel Corporation. All rights reserved.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of version 2 of the GNU General Public License as
- published by the Free Software Foundation.
-
- This program is distributed in the hope that it will be useful, but
- WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- The full GNU General Public License is included in this distribution
- in the file called LICENSE.GPL.
-
- BSD LICENSE
-
- Copyright(c) 2009 Intel Corporation. All rights reserved.
-
- Redistribution and use in source and binary forms, with or without
- modification, are permitted provided that the following conditions
- are met:
-
- * Redistributions of source code must retain the above copyright
- notice, this list of conditions and the following disclaimer.
- * Redistributions in binary form must reproduce the above copyright
- notice, this list of conditions and the following disclaimer in
- the documentation and/or other materials provided with the
- distribution.
- * Neither the name of Intel Corporation nor the names of its
- contributors may be used to endorse or promote products derived
- from this software without specific prior written permission.
-
- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-*/
-
-#ifndef _LINUX_SFI_H
-#define _LINUX_SFI_H
-
-#include <linux/init.h>
-#include <linux/types.h>
-
-/* Table signatures reserved by the SFI specification */
-#define SFI_SIG_SYST "SYST"
-#define SFI_SIG_FREQ "FREQ"
-#define SFI_SIG_IDLE "IDLE"
-#define SFI_SIG_CPUS "CPUS"
-#define SFI_SIG_MTMR "MTMR"
-#define SFI_SIG_MRTC "MRTC"
-#define SFI_SIG_MMAP "MMAP"
-#define SFI_SIG_APIC "APIC"
-#define SFI_SIG_XSDT "XSDT"
-#define SFI_SIG_WAKE "WAKE"
-#define SFI_SIG_DEVS "DEVS"
-#define SFI_SIG_GPIO "GPIO"
-
-#define SFI_SIGNATURE_SIZE 4
-#define SFI_OEM_ID_SIZE 6
-#define SFI_OEM_TABLE_ID_SIZE 8
-
-#define SFI_NAME_LEN 16
-
-#define SFI_SYST_SEARCH_BEGIN 0x000E0000
-#define SFI_SYST_SEARCH_END 0x000FFFFF
-
-#define SFI_GET_NUM_ENTRIES(ptable, entry_type) \
- ((ptable->header.len - sizeof(struct sfi_table_header)) / \
- (sizeof(entry_type)))
-/*
- * Table structures must be byte-packed to match the SFI specification,
- * as they are provided by the BIOS.
- */
-struct sfi_table_header {
- char sig[SFI_SIGNATURE_SIZE];
- u32 len;
- u8 rev;
- u8 csum;
- char oem_id[SFI_OEM_ID_SIZE];
- char oem_table_id[SFI_OEM_TABLE_ID_SIZE];
-} __packed;
-
-struct sfi_table_simple {
- struct sfi_table_header header;
- u64 pentry[1];
-} __packed;
-
-/* Comply with UEFI spec 2.1 */
-struct sfi_mem_entry {
- u32 type;
- u64 phys_start;
- u64 virt_start;
- u64 pages;
- u64 attrib;
-} __packed;
-
-struct sfi_cpu_table_entry {
- u32 apic_id;
-} __packed;
-
-struct sfi_cstate_table_entry {
- u32 hint; /* MWAIT hint */
- u32 latency; /* latency in ms */
-} __packed;
-
-struct sfi_apic_table_entry {
- u64 phys_addr; /* phy base addr for APIC reg */
-} __packed;
-
-struct sfi_freq_table_entry {
- u32 freq_mhz; /* in MHZ */
- u32 latency; /* transition latency in ms */
- u32 ctrl_val; /* value to write to PERF_CTL */
-} __packed;
-
-struct sfi_wake_table_entry {
- u64 phys_addr; /* pointer to where the wake vector locates */
-} __packed;
-
-struct sfi_timer_table_entry {
- u64 phys_addr; /* phy base addr for the timer */
- u32 freq_hz; /* in HZ */
- u32 irq;
-} __packed;
-
-struct sfi_rtc_table_entry {
- u64 phys_addr; /* phy base addr for the RTC */
- u32 irq;
-} __packed;
-
-struct sfi_device_table_entry {
- u8 type; /* bus type, I2C, SPI or ...*/
-#define SFI_DEV_TYPE_SPI 0
-#define SFI_DEV_TYPE_I2C 1
-#define SFI_DEV_TYPE_UART 2
-#define SFI_DEV_TYPE_HSI 3
-#define SFI_DEV_TYPE_IPC 4
-#define SFI_DEV_TYPE_SD 5
-
- u8 host_num; /* attached to host 0, 1...*/
- u16 addr;
- u8 irq;
- u32 max_freq;
- char name[SFI_NAME_LEN];
-} __packed;
-
-struct sfi_gpio_table_entry {
- char controller_name[SFI_NAME_LEN];
- u16 pin_no;
- char pin_name[SFI_NAME_LEN];
-} __packed;
-
-typedef int (*sfi_table_handler) (struct sfi_table_header *table);
-
-#ifdef CONFIG_SFI
-extern void __init sfi_init(void);
-extern int __init sfi_platform_init(void);
-extern void __init sfi_init_late(void);
-extern int sfi_table_parse(char *signature, char *oem_id, char *oem_table_id,
- sfi_table_handler handler);
-
-extern int sfi_disabled;
-static inline void disable_sfi(void)
-{
- sfi_disabled = 1;
-}
-
-#else /* !CONFIG_SFI */
-
-static inline void sfi_init(void)
-{
-}
-
-static inline void sfi_init_late(void)
-{
-}
-
-#define sfi_disabled 0
-
-static inline int sfi_table_parse(char *signature, char *oem_id,
- char *oem_table_id,
- sfi_table_handler handler)
-{
- return -1;
-}
-
-#endif /* !CONFIG_SFI */
-
-#endif /*_LINUX_SFI_H*/
diff --git a/include/linux/sfi_acpi.h b/include/linux/sfi_acpi.h
deleted file mode 100644
index a6e555cbe05c..000000000000
--- a/include/linux/sfi_acpi.h
+++ /dev/null
@@ -1,93 +0,0 @@
-/* sfi.h Simple Firmware Interface */
-
-/*
-
- This file is provided under a dual BSD/GPLv2 license. When using or
- redistributing this file, you may do so under either license.
-
- GPL LICENSE SUMMARY
-
- Copyright(c) 2009 Intel Corporation. All rights reserved.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of version 2 of the GNU General Public License as
- published by the Free Software Foundation.
-
- This program is distributed in the hope that it will be useful, but
- WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- The full GNU General Public License is included in this distribution
- in the file called LICENSE.GPL.
-
- BSD LICENSE
-
- Copyright(c) 2009 Intel Corporation. All rights reserved.
-
- Redistribution and use in source and binary forms, with or without
- modification, are permitted provided that the following conditions
- are met:
-
- * Redistributions of source code must retain the above copyright
- notice, this list of conditions and the following disclaimer.
- * Redistributions in binary form must reproduce the above copyright
- notice, this list of conditions and the following disclaimer in
- the documentation and/or other materials provided with the
- distribution.
- * Neither the name of Intel Corporation nor the names of its
- contributors may be used to endorse or promote products derived
- from this software without specific prior written permission.
-
- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-*/
-
-#ifndef _LINUX_SFI_ACPI_H
-#define _LINUX_SFI_ACPI_H
-
-#include <linux/acpi.h>
-#include <linux/sfi.h>
-
-#ifdef CONFIG_SFI
-extern int sfi_acpi_table_parse(char *signature, char *oem_id,
- char *oem_table_id,
- int (*handler)(struct acpi_table_header *));
-
-static inline int __init acpi_sfi_table_parse(char *signature,
- int (*handler)(struct acpi_table_header *))
-{
- if (!acpi_table_parse(signature, handler))
- return 0;
-
- return sfi_acpi_table_parse(signature, NULL, NULL, handler);
-}
-#else /* !CONFIG_SFI */
-static inline int sfi_acpi_table_parse(char *signature, char *oem_id,
- char *oem_table_id,
- int (*handler)(struct acpi_table_header *))
-{
- return -1;
-}
-
-static inline int __init acpi_sfi_table_parse(char *signature,
- int (*handler)(struct acpi_table_header *))
-{
- return acpi_table_parse(signature, handler);
-}
-#endif /* !CONFIG_SFI */
-
-#endif /*_LINUX_SFI_ACPI_H*/
diff --git a/init/main.c b/init/main.c
index a626e78dbf06..e9933cbf60d4 100644
--- a/init/main.c
+++ b/init/main.c
@@ -74,7 +74,6 @@
#include <linux/kgdb.h>
#include <linux/ftrace.h>
#include <linux/async.h>
-#include <linux/sfi.h>
#include <linux/shmem_fs.h>
#include <linux/slab.h>
#include <linux/perf_event.h>
@@ -1054,7 +1053,6 @@ asmlinkage __visible void __init __no_sanitize_address start_kernel(void)
acpi_subsystem_init();
arch_post_acpi_subsys_init();
- sfi_init_late();
kcsan_init();
/* Do the rest non-__init'ed, we're now alive */