diff options
-rw-r--r-- | Documentation/PCI/endpoint/pci-endpoint.txt | 4 | ||||
-rw-r--r-- | Documentation/PCI/endpoint/pci-test-function.txt | 4 | ||||
-rw-r--r-- | Documentation/PCI/endpoint/pci-test-howto.txt | 22 | ||||
-rw-r--r-- | Documentation/ioctl/ioctl-number.txt | 1 | ||||
-rw-r--r-- | Documentation/misc-devices/pci-endpoint-test.txt | 3 | ||||
-rw-r--r-- | drivers/misc/pci_endpoint_test.c | 29 | ||||
-rw-r--r-- | drivers/pci/controller/dwc/pcie-designware-plat.c | 1 | ||||
-rw-r--r-- | drivers/pci/endpoint/functions/pci-epf-test.c | 29 | ||||
-rw-r--r-- | include/linux/pci-epc.h | 1 | ||||
-rw-r--r-- | include/uapi/linux/pcitest.h | 1 |
10 files changed, 79 insertions, 16 deletions
diff --git a/Documentation/PCI/endpoint/pci-endpoint.txt b/Documentation/PCI/endpoint/pci-endpoint.txt index 9b1d66829290..e86a96b66a6a 100644 --- a/Documentation/PCI/endpoint/pci-endpoint.txt +++ b/Documentation/PCI/endpoint/pci-endpoint.txt @@ -44,7 +44,7 @@ by the PCI controller driver. * clear_bar: ops to reset the BAR * alloc_addr_space: ops to allocate in PCI controller address space * free_addr_space: ops to free the allocated address space - * raise_irq: ops to raise a legacy or MSI interrupt + * raise_irq: ops to raise a legacy, MSI or MSI-X interrupt * start: ops to start the PCI link * stop: ops to stop the PCI link @@ -96,7 +96,7 @@ by the PCI endpoint function driver. *) pci_epc_raise_irq() The PCI endpoint function driver should use pci_epc_raise_irq() to raise - Legacy Interrupt or MSI Interrupt. + Legacy Interrupt, MSI or MSI-X Interrupt. *) pci_epc_mem_alloc_addr() diff --git a/Documentation/PCI/endpoint/pci-test-function.txt b/Documentation/PCI/endpoint/pci-test-function.txt index bf4b5cf6fee6..5916f1f592bb 100644 --- a/Documentation/PCI/endpoint/pci-test-function.txt +++ b/Documentation/PCI/endpoint/pci-test-function.txt @@ -36,7 +36,7 @@ that the endpoint device must perform. Bitfield Description: Bit 0 : raise legacy IRQ Bit 1 : raise MSI IRQ - Bit 2 : raise MSI-X IRQ (reserved for future implementation) + Bit 2 : raise MSI-X IRQ Bit 3 : read command (read data from RC buffer) Bit 4 : write command (write data to RC buffer) Bit 5 : copy command (copy data from one RC buffer to another @@ -75,6 +75,7 @@ for the READ/WRITE/COPY and raise IRQ (Legacy/MSI) commands. Possible types: - Legacy : 0 - MSI : 1 + - MSI-X : 2 *) PCI_ENDPOINT_TEST_IRQ_NUMBER @@ -83,3 +84,4 @@ This register contains the triggered ID interrupt. Admissible values: - Legacy : 0 - MSI : [1 .. 32] + - MSI-X : [1 .. 2048] diff --git a/Documentation/PCI/endpoint/pci-test-howto.txt b/Documentation/PCI/endpoint/pci-test-howto.txt index 75f48c3bb191..65f1a137e35c 100644 --- a/Documentation/PCI/endpoint/pci-test-howto.txt +++ b/Documentation/PCI/endpoint/pci-test-howto.txt @@ -45,9 +45,9 @@ The PCI endpoint framework populates the directory with the following configurable fields. # ls functions/pci_epf_test/func1 - baseclass_code interrupt_pin revid subsys_vendor_id - cache_line_size msi_interrupts subclass_code vendorid - deviceid progif_code subsys_id + baseclass_code interrupt_pin progif_code subsys_id + cache_line_size msi_interrupts revid subsys_vendorid + deviceid msix_interrupts subclass_code vendorid The PCI endpoint function driver populates these entries with default values when the device is bound to the driver. The pci-epf-test driver populates @@ -67,6 +67,7 @@ device, the following commands can be used. # echo 0x104c > functions/pci_epf_test/func1/vendorid # echo 0xb500 > functions/pci_epf_test/func1/deviceid # echo 16 > functions/pci_epf_test/func1/msi_interrupts + # echo 8 > functions/pci_epf_test/func1/msix_interrupts 1.5 Binding pci-epf-test Device to EP Controller @@ -153,6 +154,21 @@ following commands. MSI30: NOT OKAY MSI31: NOT OKAY MSI32: NOT OKAY + MSIX1: OKAY + MSIX2: OKAY + MSIX3: OKAY + MSIX4: OKAY + MSIX5: OKAY + MSIX6: OKAY + MSIX7: OKAY + MSIX8: OKAY + MSIX9: NOT OKAY + MSIX10: NOT OKAY + MSIX11: NOT OKAY + MSIX12: NOT OKAY + MSIX13: NOT OKAY + [...] + MSIX2048: NOT OKAY Read Tests diff --git a/Documentation/ioctl/ioctl-number.txt b/Documentation/ioctl/ioctl-number.txt index 480c8609dc58..65259d459fd1 100644 --- a/Documentation/ioctl/ioctl-number.txt +++ b/Documentation/ioctl/ioctl-number.txt @@ -166,6 +166,7 @@ Code Seq#(hex) Include File Comments 'P' all linux/soundcard.h conflict! 'P' 60-6F sound/sscape_ioctl.h conflict! 'P' 00-0F drivers/usb/class/usblp.c conflict! +'P' 01-07 drivers/misc/pci_endpoint_test.c conflict! 'Q' all linux/soundcard.h 'R' 00-1F linux/random.h conflict! 'R' 01 linux/rfkill.h conflict! diff --git a/Documentation/misc-devices/pci-endpoint-test.txt b/Documentation/misc-devices/pci-endpoint-test.txt index 4ebc3594b32c..fdfa0f66d3d0 100644 --- a/Documentation/misc-devices/pci-endpoint-test.txt +++ b/Documentation/misc-devices/pci-endpoint-test.txt @@ -10,6 +10,7 @@ The PCI driver for the test device performs the following tests *) verifying addresses programmed in BAR *) raise legacy IRQ *) raise MSI IRQ + *) raise MSI-X IRQ *) read data *) write data *) copy data @@ -25,6 +26,8 @@ ioctl PCITEST_LEGACY_IRQ: Tests legacy IRQ PCITEST_MSI: Tests message signalled interrupts. The MSI number to be tested should be passed as argument. + PCITEST_MSIX: Tests message signalled interrupts. The MSI-X number + to be tested should be passed as argument. PCITEST_WRITE: Perform write tests. The size of the buffer should be passed as argument. PCITEST_READ: Perform read tests. The size of the buffer should be passed diff --git a/drivers/misc/pci_endpoint_test.c b/drivers/misc/pci_endpoint_test.c index 349794cbe1f3..f4fef108caff 100644 --- a/drivers/misc/pci_endpoint_test.c +++ b/drivers/misc/pci_endpoint_test.c @@ -39,13 +39,14 @@ #define IRQ_TYPE_LEGACY 0 #define IRQ_TYPE_MSI 1 +#define IRQ_TYPE_MSIX 2 #define PCI_ENDPOINT_TEST_MAGIC 0x0 #define PCI_ENDPOINT_TEST_COMMAND 0x4 #define COMMAND_RAISE_LEGACY_IRQ BIT(0) #define COMMAND_RAISE_MSI_IRQ BIT(1) -/* BIT(2) is reserved for raising MSI-X IRQ command */ +#define COMMAND_RAISE_MSIX_IRQ BIT(2) #define COMMAND_READ BIT(3) #define COMMAND_WRITE BIT(4) #define COMMAND_COPY BIT(5) @@ -84,7 +85,7 @@ MODULE_PARM_DESC(no_msi, "Disable MSI interrupt in pci_endpoint_test"); static int irq_type = IRQ_TYPE_MSI; module_param(irq_type, int, 0444); -MODULE_PARM_DESC(irq_type, "IRQ mode selection in pci_endpoint_test (0 - Legacy, 1 - MSI)"); +MODULE_PARM_DESC(irq_type, "IRQ mode selection in pci_endpoint_test (0 - Legacy, 1 - MSI, 2 - MSI-X)"); enum pci_barno { BAR_0, @@ -202,16 +203,18 @@ static bool pci_endpoint_test_legacy_irq(struct pci_endpoint_test *test) } static bool pci_endpoint_test_msi_irq(struct pci_endpoint_test *test, - u8 msi_num) + u16 msi_num, bool msix) { u32 val; struct pci_dev *pdev = test->pdev; pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_IRQ_TYPE, - IRQ_TYPE_MSI); + msix == false ? IRQ_TYPE_MSI : + IRQ_TYPE_MSIX); pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_IRQ_NUMBER, msi_num); pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_COMMAND, - COMMAND_RAISE_MSI_IRQ); + msix == false ? COMMAND_RAISE_MSI_IRQ : + COMMAND_RAISE_MSIX_IRQ); val = wait_for_completion_timeout(&test->irq_raised, msecs_to_jiffies(1000)); if (!val) @@ -456,7 +459,8 @@ static long pci_endpoint_test_ioctl(struct file *file, unsigned int cmd, ret = pci_endpoint_test_legacy_irq(test); break; case PCITEST_MSI: - ret = pci_endpoint_test_msi_irq(test, arg); + case PCITEST_MSIX: + ret = pci_endpoint_test_msi_irq(test, arg, cmd == PCITEST_MSIX); break; case PCITEST_WRITE: ret = pci_endpoint_test_write(test, arg); @@ -542,6 +546,12 @@ static int pci_endpoint_test_probe(struct pci_dev *pdev, dev_err(dev, "Failed to get MSI interrupts\n"); test->num_irqs = irq; break; + case IRQ_TYPE_MSIX: + irq = pci_alloc_irq_vectors(pdev, 1, 2048, PCI_IRQ_MSIX); + if (irq < 0) + dev_err(dev, "Failed to get MSI-X interrupts\n"); + test->num_irqs = irq; + break; default: dev_err(dev, "Invalid IRQ type selected\n"); } @@ -558,8 +568,9 @@ static int pci_endpoint_test_probe(struct pci_dev *pdev, pci_endpoint_test_irqhandler, IRQF_SHARED, DRV_MODULE_NAME, test); if (err) - dev_err(dev, "failed to request IRQ %d for MSI %d\n", - pci_irq_vector(pdev, i), i + 1); + dev_err(dev, "Failed to request IRQ %d for MSI%s %d\n", + pci_irq_vector(pdev, i), + irq_type == IRQ_TYPE_MSIX ? "-X" : "", i + 1); } for (bar = BAR_0; bar <= BAR_5; bar++) { @@ -625,6 +636,7 @@ err_iounmap: err_disable_msi: pci_disable_msi(pdev); + pci_disable_msix(pdev); pci_release_regions(pdev); err_disable_pdev: @@ -656,6 +668,7 @@ static void pci_endpoint_test_remove(struct pci_dev *pdev) for (i = 0; i < test->num_irqs; i++) devm_free_irq(&pdev->dev, pci_irq_vector(pdev, i), test); pci_disable_msi(pdev); + pci_disable_msix(pdev); pci_release_regions(pdev); pci_disable_device(pdev); } diff --git a/drivers/pci/controller/dwc/pcie-designware-plat.c b/drivers/pci/controller/dwc/pcie-designware-plat.c index 3f8a3aa3a91e..c12bf794d69c 100644 --- a/drivers/pci/controller/dwc/pcie-designware-plat.c +++ b/drivers/pci/controller/dwc/pcie-designware-plat.c @@ -77,6 +77,7 @@ static void dw_plat_pcie_ep_init(struct dw_pcie_ep *ep) dw_pcie_ep_reset_bar(pci, bar); epc->features |= EPC_FEATURE_NO_LINKUP_NOTIFIER; + epc->features |= EPC_FEATURE_MSIX_AVAILABLE; } static int dw_plat_pcie_ep_raise_irq(struct dw_pcie_ep *ep, u8 func_no, diff --git a/drivers/pci/endpoint/functions/pci-epf-test.c b/drivers/pci/endpoint/functions/pci-epf-test.c index db4b23672004..3e86fa3c7da3 100644 --- a/drivers/pci/endpoint/functions/pci-epf-test.c +++ b/drivers/pci/endpoint/functions/pci-epf-test.c @@ -20,10 +20,11 @@ #define IRQ_TYPE_LEGACY 0 #define IRQ_TYPE_MSI 1 +#define IRQ_TYPE_MSIX 2 #define COMMAND_RAISE_LEGACY_IRQ BIT(0) #define COMMAND_RAISE_MSI_IRQ BIT(1) -/* BIT(2) is reserved for raising MSI-X IRQ command */ +#define COMMAND_RAISE_MSIX_IRQ BIT(2) #define COMMAND_READ BIT(3) #define COMMAND_WRITE BIT(4) #define COMMAND_COPY BIT(5) @@ -47,6 +48,7 @@ struct pci_epf_test { struct pci_epf *epf; enum pci_barno test_reg_bar; bool linkup_notifier; + bool msix_available; struct delayed_work cmd_handler; }; @@ -266,6 +268,9 @@ static void pci_epf_test_raise_irq(struct pci_epf_test *epf_test, u8 irq_type, case IRQ_TYPE_MSI: pci_epc_raise_irq(epc, epf->func_no, PCI_EPC_IRQ_MSI, irq); break; + case IRQ_TYPE_MSIX: + pci_epc_raise_irq(epc, epf->func_no, PCI_EPC_IRQ_MSIX, irq); + break; default: dev_err(dev, "Failed to raise IRQ, unknown type\n"); break; @@ -292,7 +297,7 @@ static void pci_epf_test_cmd_handler(struct work_struct *work) reg->command = 0; reg->status = 0; - if (reg->irq_type > IRQ_TYPE_MSI) { + if (reg->irq_type > IRQ_TYPE_MSIX) { dev_err(dev, "Failed to detect IRQ type\n"); goto reset_handler; } @@ -346,6 +351,16 @@ static void pci_epf_test_cmd_handler(struct work_struct *work) goto reset_handler; } + if (command & COMMAND_RAISE_MSIX_IRQ) { + count = pci_epc_get_msix(epc, epf->func_no); + if (reg->irq_number > count || count <= 0) + goto reset_handler; + reg->status = STATUS_IRQ_RAISED; + pci_epc_raise_irq(epc, epf->func_no, PCI_EPC_IRQ_MSIX, + reg->irq_number); + goto reset_handler; + } + reset_handler: queue_delayed_work(kpcitest_workqueue, &epf_test->cmd_handler, msecs_to_jiffies(1)); @@ -459,6 +474,8 @@ static int pci_epf_test_bind(struct pci_epf *epf) else epf_test->linkup_notifier = true; + epf_test->msix_available = epc->features & EPC_FEATURE_MSIX_AVAILABLE; + epf_test->test_reg_bar = EPC_FEATURE_GET_BAR(epc->features); ret = pci_epc_write_header(epc, epf->func_no, header); @@ -481,6 +498,14 @@ static int pci_epf_test_bind(struct pci_epf *epf) return ret; } + if (epf_test->msix_available) { + ret = pci_epc_set_msix(epc, epf->func_no, epf->msix_interrupts); + if (ret) { + dev_err(dev, "MSI-X configuration failed\n"); + return ret; + } + } + if (!epf_test->linkup_notifier) queue_work(kpcitest_workqueue, &epf_test->cmd_handler.work); diff --git a/include/linux/pci-epc.h b/include/linux/pci-epc.h index bb2395b56f13..37dab8116901 100644 --- a/include/linux/pci-epc.h +++ b/include/linux/pci-epc.h @@ -102,6 +102,7 @@ struct pci_epc { #define EPC_FEATURE_NO_LINKUP_NOTIFIER BIT(0) #define EPC_FEATURE_BAR_MASK (BIT(1) | BIT(2) | BIT(3)) +#define EPC_FEATURE_MSIX_AVAILABLE BIT(4) #define EPC_FEATURE_SET_BAR(features, bar) \ (features |= (EPC_FEATURE_BAR_MASK & (bar << 1))) #define EPC_FEATURE_GET_BAR(features) \ diff --git a/include/uapi/linux/pcitest.h b/include/uapi/linux/pcitest.h index 953cf036cb26..d746fb159dcd 100644 --- a/include/uapi/linux/pcitest.h +++ b/include/uapi/linux/pcitest.h @@ -16,5 +16,6 @@ #define PCITEST_WRITE _IOW('P', 0x4, unsigned long) #define PCITEST_READ _IOW('P', 0x5, unsigned long) #define PCITEST_COPY _IOW('P', 0x6, unsigned long) +#define PCITEST_MSIX _IOW('P', 0x7, int) #endif /* __UAPI_LINUX_PCITEST_H */ |