diff options
| -rw-r--r-- | drivers/mmc/host/sdhci-msm.c | 173 |
1 files changed, 171 insertions, 2 deletions
diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c index 79cb06064084..85a882b4c541 100644 --- a/drivers/mmc/host/sdhci-msm.c +++ b/drivers/mmc/host/sdhci-msm.c @@ -123,6 +123,10 @@ #define CMUX_SHIFT_PHASE_MASK (7 << CMUX_SHIFT_PHASE_SHIFT) #define MSM_MMC_AUTOSUSPEND_DELAY_MS 50 + +/* Timeout value to avoid infinite waiting for pwr_irq */ +#define MSM_PWR_IRQ_TIMEOUT_MS 5000 + struct sdhci_msm_host { struct platform_device *pdev; void __iomem *core_mem; /* MSM SDCC mapped address */ @@ -137,6 +141,10 @@ struct sdhci_msm_host { bool calibration_done; u8 saved_tuning_phase; bool use_cdclp533; + u32 curr_pwr_state; + u32 curr_io_level; + wait_queue_head_t pwr_irq_wait; + bool pwr_irq_flag; }; static unsigned int msm_get_clock_rate_for_bus_mode(struct sdhci_host *host, @@ -995,6 +1003,73 @@ static void sdhci_msm_set_uhs_signaling(struct sdhci_host *host, sdhci_msm_hs400(host, &mmc->ios); } +static inline void sdhci_msm_init_pwr_irq_wait(struct sdhci_msm_host *msm_host) +{ + init_waitqueue_head(&msm_host->pwr_irq_wait); +} + +static inline void sdhci_msm_complete_pwr_irq_wait( + struct sdhci_msm_host *msm_host) +{ + wake_up(&msm_host->pwr_irq_wait); +} + +/* + * sdhci_msm_check_power_status API should be called when registers writes + * which can toggle sdhci IO bus ON/OFF or change IO lines HIGH/LOW happens. + * To what state the register writes will change the IO lines should be passed + * as the argument req_type. This API will check whether the IO line's state + * is already the expected state and will wait for power irq only if + * power irq is expected to be trigerred based on the current IO line state + * and expected IO line state. + */ +static void sdhci_msm_check_power_status(struct sdhci_host *host, u32 req_type) +{ + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host); + bool done = false; + + pr_debug("%s: %s: request %d curr_pwr_state %x curr_io_level %x\n", + mmc_hostname(host->mmc), __func__, req_type, + msm_host->curr_pwr_state, msm_host->curr_io_level); + + /* + * The IRQ for request type IO High/LOW will be generated when - + * there is a state change in 1.8V enable bit (bit 3) of + * SDHCI_HOST_CONTROL2 register. The reset state of that bit is 0 + * which indicates 3.3V IO voltage. So, when MMC core layer tries + * to set it to 3.3V before card detection happens, the + * IRQ doesn't get triggered as there is no state change in this bit. + * The driver already handles this case by changing the IO voltage + * level to high as part of controller power up sequence. Hence, check + * for host->pwr to handle a case where IO voltage high request is + * issued even before controller power up. + */ + if ((req_type & REQ_IO_HIGH) && !host->pwr) { + pr_debug("%s: do not wait for power IRQ that never comes, req_type: %d\n", + mmc_hostname(host->mmc), req_type); + return; + } + if ((req_type & msm_host->curr_pwr_state) || + (req_type & msm_host->curr_io_level)) + done = true; + /* + * This is needed here to handle cases where register writes will + * not change the current bus state or io level of the controller. + * In this case, no power irq will be triggerred and we should + * not wait. + */ + if (!done) { + if (!wait_event_timeout(msm_host->pwr_irq_wait, + msm_host->pwr_irq_flag, + msecs_to_jiffies(MSM_PWR_IRQ_TIMEOUT_MS))) + __WARN_printf("%s: pwr_irq for req: (%d) timed out\n", + mmc_hostname(host->mmc), req_type); + } + pr_debug("%s: %s: request %d done\n", mmc_hostname(host->mmc), + __func__, req_type); +} + static void sdhci_msm_dump_pwr_ctrl_regs(struct sdhci_host *host) { struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); @@ -1013,6 +1088,8 @@ static void sdhci_msm_handle_pwr_irq(struct sdhci_host *host, int irq) struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host); u32 irq_status, irq_ack = 0; int retry = 10; + int pwr_state = 0, io_level = 0; + irq_status = readl_relaxed(msm_host->core_mem + CORE_PWRCTL_STATUS); irq_status &= INT_MASK; @@ -1041,10 +1118,26 @@ static void sdhci_msm_handle_pwr_irq(struct sdhci_host *host, int irq) udelay(10); } - if (irq_status & (CORE_PWRCTL_BUS_ON | CORE_PWRCTL_BUS_OFF)) + /* Handle BUS ON/OFF*/ + if (irq_status & CORE_PWRCTL_BUS_ON) { + pwr_state = REQ_BUS_ON; + io_level = REQ_IO_HIGH; + irq_ack |= CORE_PWRCTL_BUS_SUCCESS; + } + if (irq_status & CORE_PWRCTL_BUS_OFF) { + pwr_state = REQ_BUS_OFF; + io_level = REQ_IO_LOW; irq_ack |= CORE_PWRCTL_BUS_SUCCESS; - if (irq_status & (CORE_PWRCTL_IO_LOW | CORE_PWRCTL_IO_HIGH)) + } + /* Handle IO LOW/HIGH */ + if (irq_status & CORE_PWRCTL_IO_LOW) { + io_level = REQ_IO_LOW; irq_ack |= CORE_PWRCTL_IO_SUCCESS; + } + if (irq_status & CORE_PWRCTL_IO_HIGH) { + io_level = REQ_IO_HIGH; + irq_ack |= CORE_PWRCTL_IO_SUCCESS; + } /* * The driver has to acknowledge the interrupt, switch voltages and @@ -1053,6 +1146,11 @@ static void sdhci_msm_handle_pwr_irq(struct sdhci_host *host, int irq) */ writel_relaxed(irq_ack, msm_host->core_mem + CORE_PWRCTL_CTL); + if (pwr_state) + msm_host->curr_pwr_state = pwr_state; + if (io_level) + msm_host->curr_io_level = io_level; + pr_debug("%s: %s: Handled IRQ(%d), irq_status=0x%x, ack=0x%x\n", mmc_hostname(msm_host->mmc), __func__, irq, irq_status, irq_ack); @@ -1061,8 +1159,13 @@ static void sdhci_msm_handle_pwr_irq(struct sdhci_host *host, int irq) static irqreturn_t sdhci_msm_pwr_irq(int irq, void *data) { struct sdhci_host *host = (struct sdhci_host *)data; + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host); sdhci_msm_handle_pwr_irq(host, irq); + msm_host->pwr_irq_flag = 1; + sdhci_msm_complete_pwr_irq_wait(msm_host); + return IRQ_HANDLED; } @@ -1132,6 +1235,69 @@ out: __sdhci_msm_set_clock(host, clock); } +/* + * Platform specific register write functions. This is so that, if any + * register write needs to be followed up by platform specific actions, + * they can be added here. These functions can go to sleep when writes + * to certain registers are done. + * These functions are relying on sdhci_set_ios not using spinlock. + */ +static int __sdhci_msm_check_write(struct sdhci_host *host, u16 val, int reg) +{ + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host); + u32 req_type = 0; + + switch (reg) { + case SDHCI_HOST_CONTROL2: + req_type = (val & SDHCI_CTRL_VDD_180) ? REQ_IO_LOW : + REQ_IO_HIGH; + break; + case SDHCI_SOFTWARE_RESET: + if (host->pwr && (val & SDHCI_RESET_ALL)) + req_type = REQ_BUS_OFF; + break; + case SDHCI_POWER_CONTROL: + req_type = !val ? REQ_BUS_OFF : REQ_BUS_ON; + break; + } + + if (req_type) { + msm_host->pwr_irq_flag = 0; + /* + * Since this register write may trigger a power irq, ensure + * all previous register writes are complete by this point. + */ + mb(); + } + return req_type; +} + +/* This function may sleep*/ +static void sdhci_msm_writew(struct sdhci_host *host, u16 val, int reg) +{ + u32 req_type = 0; + + req_type = __sdhci_msm_check_write(host, val, reg); + writew_relaxed(val, host->ioaddr + reg); + + if (req_type) + sdhci_msm_check_power_status(host, req_type); +} + +/* This function may sleep*/ +static void sdhci_msm_writeb(struct sdhci_host *host, u8 val, int reg) +{ + u32 req_type = 0; + + req_type = __sdhci_msm_check_write(host, val, reg); + + writeb_relaxed(val, host->ioaddr + reg); + + if (req_type) + sdhci_msm_check_power_status(host, req_type); +} + static const struct of_device_id sdhci_msm_dt_match[] = { { .compatible = "qcom,sdhci-msm-v4" }, {}, @@ -1146,6 +1312,8 @@ static const struct sdhci_ops sdhci_msm_ops = { .get_max_clock = sdhci_msm_get_max_clock, .set_bus_width = sdhci_set_bus_width, .set_uhs_signaling = sdhci_msm_set_uhs_signaling, + .write_w = sdhci_msm_writew, + .write_b = sdhci_msm_writeb, }; static const struct sdhci_pltfm_data sdhci_msm_pdata = { @@ -1324,6 +1492,7 @@ static int sdhci_msm_probe(struct platform_device *pdev) goto clk_disable; } + sdhci_msm_init_pwr_irq_wait(msm_host); /* Enable pwr irq interrupts */ writel_relaxed(INT_MASK, msm_host->core_mem + CORE_PWRCTL_MASK); |