diff options
| -rw-r--r-- | drivers/scsi/bnx2i/bnx2i_hwi.c | 85 |
1 files changed, 41 insertions, 44 deletions
diff --git a/drivers/scsi/bnx2i/bnx2i_hwi.c b/drivers/scsi/bnx2i/bnx2i_hwi.c index bad396e5c601..43e8a1dafec0 100644 --- a/drivers/scsi/bnx2i/bnx2i_hwi.c +++ b/drivers/scsi/bnx2i/bnx2i_hwi.c @@ -2206,10 +2206,8 @@ static void bnx2i_process_iscsi_error(struct bnx2i_hba *hba, { struct bnx2i_conn *bnx2i_conn; u32 iscsi_cid; - char warn_notice[] = "iscsi_warning"; - char error_notice[] = "iscsi_error"; - char additional_notice[64]; - char *message; + const char *additional_notice = ""; + const char *message; int need_recovery; u64 err_mask64; @@ -2224,133 +2222,132 @@ static void bnx2i_process_iscsi_error(struct bnx2i_hba *hba, if (err_mask64 & iscsi_error_mask) { need_recovery = 0; - message = warn_notice; + message = "iscsi_warning"; } else { need_recovery = 1; - message = error_notice; + message = "iscsi_error"; } switch (iscsi_err->completion_status) { case ISCSI_KCQE_COMPLETION_STATUS_HDR_DIG_ERR: - strcpy(additional_notice, "hdr digest err"); + additional_notice = "hdr digest err"; break; case ISCSI_KCQE_COMPLETION_STATUS_DATA_DIG_ERR: - strcpy(additional_notice, "data digest err"); + additional_notice = "data digest err"; break; case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_OPCODE: - strcpy(additional_notice, "wrong opcode rcvd"); + additional_notice = "wrong opcode rcvd"; break; case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_AHS_LEN: - strcpy(additional_notice, "AHS len > 0 rcvd"); + additional_notice = "AHS len > 0 rcvd"; break; case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_ITT: - strcpy(additional_notice, "invalid ITT rcvd"); + additional_notice = "invalid ITT rcvd"; break; case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_STATSN: - strcpy(additional_notice, "wrong StatSN rcvd"); + additional_notice = "wrong StatSN rcvd"; break; case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_EXP_DATASN: - strcpy(additional_notice, "wrong DataSN rcvd"); + additional_notice = "wrong DataSN rcvd"; break; case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_PEND_R2T: - strcpy(additional_notice, "pend R2T violation"); + additional_notice = "pend R2T violation"; break; case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_O_U_0: - strcpy(additional_notice, "ERL0, UO"); + additional_notice = "ERL0, UO"; break; case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_O_U_1: - strcpy(additional_notice, "ERL0, U1"); + additional_notice = "ERL0, U1"; break; case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_O_U_2: - strcpy(additional_notice, "ERL0, U2"); + additional_notice = "ERL0, U2"; break; case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_O_U_3: - strcpy(additional_notice, "ERL0, U3"); + additional_notice = "ERL0, U3"; break; case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_O_U_4: - strcpy(additional_notice, "ERL0, U4"); + additional_notice = "ERL0, U4"; break; case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_O_U_5: - strcpy(additional_notice, "ERL0, U5"); + additional_notice = "ERL0, U5"; break; case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_O_U_6: - strcpy(additional_notice, "ERL0, U6"); + additional_notice = "ERL0, U6"; break; case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_REMAIN_RCV_LEN: - strcpy(additional_notice, "invalid resi len"); + additional_notice = "invalid resi len"; break; case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_MAX_RCV_PDU_LEN: - strcpy(additional_notice, "MRDSL violation"); + additional_notice = "MRDSL violation"; break; case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_F_BIT_ZERO: - strcpy(additional_notice, "F-bit not set"); + additional_notice = "F-bit not set"; break; case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_TTT_NOT_RSRV: - strcpy(additional_notice, "invalid TTT"); + additional_notice = "invalid TTT"; break; case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_DATASN: - strcpy(additional_notice, "invalid DataSN"); + additional_notice = "invalid DataSN"; break; case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_REMAIN_BURST_LEN: - strcpy(additional_notice, "burst len violation"); + additional_notice = "burst len violation"; break; case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_BUFFER_OFF: - strcpy(additional_notice, "buf offset violation"); + additional_notice = "buf offset violation"; break; case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_LUN: - strcpy(additional_notice, "invalid LUN field"); + additional_notice = "invalid LUN field"; break; case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_R2TSN: - strcpy(additional_notice, "invalid R2TSN field"); + additional_notice = "invalid R2TSN field"; break; #define BNX2I_ERR_DESIRED_DATA_TRNS_LEN_0 \ ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_DESIRED_DATA_TRNS_LEN_0 case BNX2I_ERR_DESIRED_DATA_TRNS_LEN_0: - strcpy(additional_notice, "invalid cmd len1"); + additional_notice = "invalid cmd len1"; break; #define BNX2I_ERR_DESIRED_DATA_TRNS_LEN_1 \ ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_DESIRED_DATA_TRNS_LEN_1 case BNX2I_ERR_DESIRED_DATA_TRNS_LEN_1: - strcpy(additional_notice, "invalid cmd len2"); + additional_notice = "invalid cmd len2"; break; case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_PEND_R2T_EXCEED: - strcpy(additional_notice, - "pend r2t exceeds MaxOutstandingR2T value"); + additional_notice = "pend r2t exceeds MaxOutstandingR2T value"; break; case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_TTT_IS_RSRV: - strcpy(additional_notice, "TTT is rsvd"); + additional_notice = "TTT is rsvd"; break; case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_MAX_BURST_LEN: - strcpy(additional_notice, "MBL violation"); + additional_notice = "MBL violation"; break; #define BNX2I_ERR_DATA_SEG_LEN_NOT_ZERO \ ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_DATA_SEG_LEN_NOT_ZERO case BNX2I_ERR_DATA_SEG_LEN_NOT_ZERO: - strcpy(additional_notice, "data seg len != 0"); + additional_notice = "data seg len != 0"; break; case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_REJECT_PDU_LEN: - strcpy(additional_notice, "reject pdu len error"); + additional_notice = "reject pdu len error"; break; case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_ASYNC_PDU_LEN: - strcpy(additional_notice, "async pdu len error"); + additional_notice = "async pdu len error"; break; case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_NOPIN_PDU_LEN: - strcpy(additional_notice, "nopin pdu len error"); + additional_notice = "nopin pdu len error"; break; #define BNX2_ERR_PEND_R2T_IN_CLEANUP \ ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_PEND_R2T_IN_CLEANUP case BNX2_ERR_PEND_R2T_IN_CLEANUP: - strcpy(additional_notice, "pend r2t in cleanup"); + additional_notice = "pend r2t in cleanup"; break; case ISCI_KCQE_COMPLETION_STATUS_TCP_ERROR_IP_FRAGMENT: - strcpy(additional_notice, "IP fragments rcvd"); + additional_notice = "IP fragments rcvd"; break; case ISCI_KCQE_COMPLETION_STATUS_TCP_ERROR_IP_OPTIONS: - strcpy(additional_notice, "IP options error"); + additional_notice = "IP options error"; break; case ISCI_KCQE_COMPLETION_STATUS_TCP_ERROR_URGENT_FLAG: - strcpy(additional_notice, "urgent flag error"); + additional_notice = "urgent flag error"; break; default: printk(KERN_ALERT "iscsi_err - unknown err %x\n", |