diff options
| -rw-r--r-- | drivers/media/i2c/max9271.c | 30 |
1 files changed, 23 insertions, 7 deletions
diff --git a/drivers/media/i2c/max9271.c b/drivers/media/i2c/max9271.c index c495582dcff6..2c7dc7fb9846 100644 --- a/drivers/media/i2c/max9271.c +++ b/drivers/media/i2c/max9271.c @@ -106,7 +106,10 @@ int max9271_set_serial_link(struct max9271_device *dev, bool enable) * Short delays here appear to show bit-errors in the writes following. * Therefore a conservative delay seems best here. */ - max9271_write(dev, 0x04, val); + ret = max9271_write(dev, 0x04, val); + if (ret < 0) + return ret; + usleep_range(5000, 8000); return 0; @@ -118,7 +121,7 @@ int max9271_configure_i2c(struct max9271_device *dev, u8 i2c_config) int ret; ret = max9271_write(dev, 0x0d, i2c_config); - if (ret) + if (ret < 0) return ret; /* The delay required after an I2C bus configuration change is not @@ -143,7 +146,10 @@ int max9271_set_high_threshold(struct max9271_device *dev, bool enable) * Enable or disable reverse channel high threshold to increase * immunity to power supply noise. */ - max9271_write(dev, 0x08, enable ? ret | BIT(0) : ret & ~BIT(0)); + ret = max9271_write(dev, 0x08, enable ? ret | BIT(0) : ret & ~BIT(0)); + if (ret < 0) + return ret; + usleep_range(2000, 2500); return 0; @@ -152,6 +158,8 @@ EXPORT_SYMBOL_GPL(max9271_set_high_threshold); int max9271_configure_gmsl_link(struct max9271_device *dev) { + int ret; + /* * Configure the GMSL link: * @@ -162,16 +170,24 @@ int max9271_configure_gmsl_link(struct max9271_device *dev) * * TODO: Make the GMSL link configuration parametric. */ - max9271_write(dev, 0x07, MAX9271_DBL | MAX9271_HVEN | - MAX9271_EDC_1BIT_PARITY); + ret = max9271_write(dev, 0x07, MAX9271_DBL | MAX9271_HVEN | + MAX9271_EDC_1BIT_PARITY); + if (ret < 0) + return ret; + usleep_range(5000, 8000); /* * Adjust spread spectrum to +4% and auto-detect pixel clock * and serial link rate. */ - max9271_write(dev, 0x02, MAX9271_SPREAD_SPECT_4 | MAX9271_R02_RES | - MAX9271_PCLK_AUTODETECT | MAX9271_SERIAL_AUTODETECT); + ret = max9271_write(dev, 0x02, + MAX9271_SPREAD_SPECT_4 | MAX9271_R02_RES | + MAX9271_PCLK_AUTODETECT | + MAX9271_SERIAL_AUTODETECT); + if (ret < 0) + return ret; + usleep_range(5000, 8000); return 0; |