diff options
| -rw-r--r-- | drivers/spi/spi-mem.c | 204 | ||||
| -rw-r--r-- | include/linux/spi/spi-mem.h | 80 |
2 files changed, 284 insertions, 0 deletions
diff --git a/drivers/spi/spi-mem.c b/drivers/spi/spi-mem.c index 7916e655afc8..b12a7974b665 100644 --- a/drivers/spi/spi-mem.c +++ b/drivers/spi/spi-mem.c @@ -432,6 +432,210 @@ int spi_mem_adjust_op_size(struct spi_mem *mem, struct spi_mem_op *op) } EXPORT_SYMBOL_GPL(spi_mem_adjust_op_size); +static ssize_t spi_mem_no_dirmap_read(struct spi_mem_dirmap_desc *desc, + u64 offs, size_t len, void *buf) +{ + struct spi_mem_op op = desc->info.op_tmpl; + int ret; + + op.addr.val = desc->info.offset + offs; + op.data.buf.in = buf; + op.data.nbytes = len; + ret = spi_mem_adjust_op_size(desc->mem, &op); + if (ret) + return ret; + + ret = spi_mem_exec_op(desc->mem, &op); + if (ret) + return ret; + + return op.data.nbytes; +} + +static ssize_t spi_mem_no_dirmap_write(struct spi_mem_dirmap_desc *desc, + u64 offs, size_t len, const void *buf) +{ + struct spi_mem_op op = desc->info.op_tmpl; + int ret; + + op.addr.val = desc->info.offset + offs; + op.data.buf.out = buf; + op.data.nbytes = len; + ret = spi_mem_adjust_op_size(desc->mem, &op); + if (ret) + return ret; + + ret = spi_mem_exec_op(desc->mem, &op); + if (ret) + return ret; + + return op.data.nbytes; +} + +/** + * spi_mem_dirmap_create() - Create a direct mapping descriptor + * @mem: SPI mem device this direct mapping should be created for + * @info: direct mapping information + * + * This function is creating a direct mapping descriptor which can then be used + * to access the memory using spi_mem_dirmap_read() or spi_mem_dirmap_write(). + * If the SPI controller driver does not support direct mapping, this function + * fallback to an implementation using spi_mem_exec_op(), so that the caller + * doesn't have to bother implementing a fallback on his own. + * + * Return: a valid pointer in case of success, and ERR_PTR() otherwise. + */ +struct spi_mem_dirmap_desc * +spi_mem_dirmap_create(struct spi_mem *mem, + const struct spi_mem_dirmap_info *info) +{ + struct spi_controller *ctlr = mem->spi->controller; + struct spi_mem_dirmap_desc *desc; + int ret = -ENOTSUPP; + + /* Make sure the number of address cycles is between 1 and 8 bytes. */ + if (!info->op_tmpl.addr.nbytes || info->op_tmpl.addr.nbytes > 8) + return ERR_PTR(-EINVAL); + + /* data.dir should either be SPI_MEM_DATA_IN or SPI_MEM_DATA_OUT. */ + if (info->op_tmpl.data.dir == SPI_MEM_NO_DATA) + return ERR_PTR(-EINVAL); + + desc = kzalloc(sizeof(*desc), GFP_KERNEL); + if (!desc) + return ERR_PTR(-ENOMEM); + + desc->mem = mem; + desc->info = *info; + if (ctlr->mem_ops && ctlr->mem_ops->dirmap_create) + ret = ctlr->mem_ops->dirmap_create(desc); + + if (ret) { + desc->nodirmap = true; + if (!spi_mem_supports_op(desc->mem, &desc->info.op_tmpl)) + ret = -ENOTSUPP; + else + ret = 0; + } + + if (ret) { + kfree(desc); + return ERR_PTR(ret); + } + + return desc; +} +EXPORT_SYMBOL_GPL(spi_mem_dirmap_create); + +/** + * spi_mem_dirmap_destroy() - Destroy a direct mapping descriptor + * @desc: the direct mapping descriptor to destroy + * @info: direct mapping information + * + * This function destroys a direct mapping descriptor previously created by + * spi_mem_dirmap_create(). + */ +void spi_mem_dirmap_destroy(struct spi_mem_dirmap_desc *desc) +{ + struct spi_controller *ctlr = desc->mem->spi->controller; + + if (!desc->nodirmap && ctlr->mem_ops && ctlr->mem_ops->dirmap_destroy) + ctlr->mem_ops->dirmap_destroy(desc); +} +EXPORT_SYMBOL_GPL(spi_mem_dirmap_destroy); + +/** + * spi_mem_dirmap_dirmap_read() - Read data through a direct mapping + * @desc: direct mapping descriptor + * @offs: offset to start reading from. Note that this is not an absolute + * offset, but the offset within the direct mapping which already has + * its own offset + * @len: length in bytes + * @buf: destination buffer. This buffer must be DMA-able + * + * This function reads data from a memory device using a direct mapping + * previously instantiated with spi_mem_dirmap_create(). + * + * Return: the amount of data read from the memory device or a negative error + * code. Note that the returned size might be smaller than @len, and the caller + * is responsible for calling spi_mem_dirmap_read() again when that happens. + */ +ssize_t spi_mem_dirmap_read(struct spi_mem_dirmap_desc *desc, + u64 offs, size_t len, void *buf) +{ + struct spi_controller *ctlr = desc->mem->spi->controller; + ssize_t ret; + + if (desc->info.op_tmpl.data.dir != SPI_MEM_DATA_IN) + return -EINVAL; + + if (!len) + return 0; + + if (desc->nodirmap) { + ret = spi_mem_no_dirmap_read(desc, offs, len, buf); + } else if (ctlr->mem_ops && ctlr->mem_ops->dirmap_read) { + ret = spi_mem_access_start(desc->mem); + if (ret) + return ret; + + ret = ctlr->mem_ops->dirmap_read(desc, offs, len, buf); + + spi_mem_access_end(desc->mem); + } else { + ret = -ENOTSUPP; + } + + return ret; +} +EXPORT_SYMBOL_GPL(spi_mem_dirmap_read); + +/** + * spi_mem_dirmap_dirmap_write() - Write data through a direct mapping + * @desc: direct mapping descriptor + * @offs: offset to start writing from. Note that this is not an absolute + * offset, but the offset within the direct mapping which already has + * its own offset + * @len: length in bytes + * @buf: source buffer. This buffer must be DMA-able + * + * This function writes data to a memory device using a direct mapping + * previously instantiated with spi_mem_dirmap_create(). + * + * Return: the amount of data written to the memory device or a negative error + * code. Note that the returned size might be smaller than @len, and the caller + * is responsible for calling spi_mem_dirmap_write() again when that happens. + */ +ssize_t spi_mem_dirmap_write(struct spi_mem_dirmap_desc *desc, + u64 offs, size_t len, const void *buf) +{ + struct spi_controller *ctlr = desc->mem->spi->controller; + ssize_t ret; + + if (desc->info.op_tmpl.data.dir != SPI_MEM_DATA_OUT) + return -EINVAL; + + if (!len) + return 0; + + if (desc->nodirmap) { + ret = spi_mem_no_dirmap_write(desc, offs, len, buf); + } else if (ctlr->mem_ops && ctlr->mem_ops->dirmap_write) { + ret = spi_mem_access_start(desc->mem); + if (ret) + return ret; + + ret = ctlr->mem_ops->dirmap_write(desc, offs, len, buf); + + spi_mem_access_end(desc->mem); + } else { + ret = -ENOTSUPP; + } + + return ret; +} +EXPORT_SYMBOL_GPL(spi_mem_dirmap_write); + static inline struct spi_mem_driver *to_spi_mem_drv(struct device_driver *drv) { return container_of(drv, struct spi_mem_driver, spidrv.driver); diff --git a/include/linux/spi/spi-mem.h b/include/linux/spi/spi-mem.h index 250b6f5c47c2..3fe24500c5ee 100644 --- a/include/linux/spi/spi-mem.h +++ b/include/linux/spi/spi-mem.h @@ -125,6 +125,49 @@ struct spi_mem_op { } /** + * struct spi_mem_dirmap_info - Direct mapping information + * @op_tmpl: operation template that should be used by the direct mapping when + * the memory device is accessed + * @offset: absolute offset this direct mapping is pointing to + * @length: length in byte of this direct mapping + * + * These information are used by the controller specific implementation to know + * the portion of memory that is directly mapped and the spi_mem_op that should + * be used to access the device. + * A direct mapping is only valid for one direction (read or write) and this + * direction is directly encoded in the ->op_tmpl.data.dir field. + */ +struct spi_mem_dirmap_info { + struct spi_mem_op op_tmpl; + u64 offset; + u64 length; +}; + +/** + * struct spi_mem_dirmap_desc - Direct mapping descriptor + * @mem: the SPI memory device this direct mapping is attached to + * @info: information passed at direct mapping creation time + * @nodirmap: set to 1 if the SPI controller does not implement + * ->mem_ops->dirmap_create() or when this function returned an + * error. If @nodirmap is true, all spi_mem_dirmap_{read,write}() + * calls will use spi_mem_exec_op() to access the memory. This is a + * degraded mode that allows spi_mem drivers to use the same code + * no matter whether the controller supports direct mapping or not + * @priv: field pointing to controller specific data + * + * Common part of a direct mapping descriptor. This object is created by + * spi_mem_dirmap_create() and controller implementation of ->create_dirmap() + * can create/attach direct mapping resources to the descriptor in the ->priv + * field. + */ +struct spi_mem_dirmap_desc { + struct spi_mem *mem; + struct spi_mem_dirmap_info info; + unsigned int nodirmap; + void *priv; +}; + +/** * struct spi_mem - describes a SPI memory device * @spi: the underlying SPI device * @drvpriv: spi_mem_driver private data @@ -179,10 +222,32 @@ static inline void *spi_mem_get_drvdata(struct spi_mem *mem) * Note that if the implementation of this function allocates memory * dynamically, then it should do so with devm_xxx(), as we don't * have a ->free_name() function. + * @dirmap_create: create a direct mapping descriptor that can later be used to + * access the memory device. This method is optional + * @dirmap_destroy: destroy a memory descriptor previous created by + * ->dirmap_create() + * @dirmap_read: read data from the memory device using the direct mapping + * created by ->dirmap_create(). The function can return less + * data than requested (for example when the request is crossing + * the currently mapped area), and the caller of + * spi_mem_dirmap_read() is responsible for calling it again in + * this case. + * @dirmap_write: write data to the memory device using the direct mapping + * created by ->dirmap_create(). The function can return less + * data than requested (for example when the request is crossing + * the currently mapped area), and the caller of + * spi_mem_dirmap_write() is responsible for calling it again in + * this case. * * This interface should be implemented by SPI controllers providing an * high-level interface to execute SPI memory operation, which is usually the * case for QSPI controllers. + * + * Note on ->dirmap_{read,write}(): drivers should avoid accessing the direct + * mapping from the CPU because doing that can stall the CPU waiting for the + * SPI mem transaction to finish, and this will make real-time maintainers + * unhappy and might make your system less reactive. Instead, drivers should + * use DMA to access this direct mapping. */ struct spi_controller_mem_ops { int (*adjust_op_size)(struct spi_mem *mem, struct spi_mem_op *op); @@ -191,6 +256,12 @@ struct spi_controller_mem_ops { int (*exec_op)(struct spi_mem *mem, const struct spi_mem_op *op); const char *(*get_name)(struct spi_mem *mem); + int (*dirmap_create)(struct spi_mem_dirmap_desc *desc); + void (*dirmap_destroy)(struct spi_mem_dirmap_desc *desc); + ssize_t (*dirmap_read)(struct spi_mem_dirmap_desc *desc, + u64 offs, size_t len, void *buf); + ssize_t (*dirmap_write)(struct spi_mem_dirmap_desc *desc, + u64 offs, size_t len, const void *buf); }; /** @@ -251,6 +322,15 @@ int spi_mem_exec_op(struct spi_mem *mem, const char *spi_mem_get_name(struct spi_mem *mem); +struct spi_mem_dirmap_desc * +spi_mem_dirmap_create(struct spi_mem *mem, + const struct spi_mem_dirmap_info *info); +void spi_mem_dirmap_destroy(struct spi_mem_dirmap_desc *desc); +ssize_t spi_mem_dirmap_read(struct spi_mem_dirmap_desc *desc, + u64 offs, size_t len, void *buf); +ssize_t spi_mem_dirmap_write(struct spi_mem_dirmap_desc *desc, + u64 offs, size_t len, const void *buf); + int spi_mem_driver_register_with_owner(struct spi_mem_driver *drv, struct module *owner); |