summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--Documentation/devicetree/bindings/net/dsa/mt7530.txt6
-rw-r--r--drivers/net/dsa/mt7530.c96
-rw-r--r--drivers/net/dsa/mt7530.h9
-rw-r--r--drivers/net/ethernet/mediatek/Kconfig2
-rw-r--r--drivers/net/ethernet/mediatek/mtk_eth_soc.c48
-rw-r--r--drivers/net/ethernet/mediatek/mtk_eth_soc.h4
6 files changed, 117 insertions, 48 deletions
diff --git a/Documentation/devicetree/bindings/net/dsa/mt7530.txt b/Documentation/devicetree/bindings/net/dsa/mt7530.txt
index aa3527f71fdc..47aa205ee0bd 100644
--- a/Documentation/devicetree/bindings/net/dsa/mt7530.txt
+++ b/Documentation/devicetree/bindings/net/dsa/mt7530.txt
@@ -3,12 +3,16 @@ Mediatek MT7530 Ethernet switch
Required properties:
-- compatible: Must be compatible = "mediatek,mt7530";
+- compatible: may be compatible = "mediatek,mt7530"
+ or compatible = "mediatek,mt7621"
- #address-cells: Must be 1.
- #size-cells: Must be 0.
- mediatek,mcm: Boolean; if defined, indicates that either MT7530 is the part
on multi-chip module belong to MT7623A has or the remotely standalone
chip as the function MT7623N reference board provided for.
+
+If compatible mediatek,mt7530 is set then the following properties are required
+
- core-supply: Phandle to the regulator node necessary for the core power.
- io-supply: Phandle to the regulator node necessary for the I/O power.
See Documentation/devicetree/bindings/regulator/mt6323-regulator.txt
diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index a8a2c728afba..c2b61500f958 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -621,17 +621,19 @@ static void mt7530_adjust_link(struct dsa_switch *ds, int port,
struct mt7530_priv *priv = ds->priv;
if (phy_is_pseudo_fixed_link(phydev)) {
- dev_dbg(priv->dev, "phy-mode for master device = %x\n",
- phydev->interface);
-
- /* Setup TX circuit incluing relevant PAD and driving */
- mt7530_pad_clk_setup(ds, phydev->interface);
-
- /* Setup RX circuit, relevant PAD and driving on the host
- * which must be placed after the setup on the device side is
- * all finished.
- */
- mt7623_pad_clk_setup(ds);
+ if (priv->id == ID_MT7530) {
+ dev_dbg(priv->dev, "phy-mode for master device = %x\n",
+ phydev->interface);
+
+ /* Setup TX circuit incluing relevant PAD and driving */
+ mt7530_pad_clk_setup(ds, phydev->interface);
+
+ /* Setup RX circuit, relevant PAD and driving on the
+ * host which must be placed after the setup on the
+ * device side is all finished.
+ */
+ mt7623_pad_clk_setup(ds);
+ }
} else {
u16 lcl_adv = 0, rmt_adv = 0;
u8 flowctrl;
@@ -687,6 +689,10 @@ mt7530_cpu_port_enable(struct mt7530_priv *priv,
/* Unknown unicast frame fordwarding to the cpu port */
mt7530_set(priv, MT7530_MFC, UNU_FFP(BIT(port)));
+ /* Set CPU port number */
+ if (priv->id == ID_MT7621)
+ mt7530_rmw(priv, MT7530_MFC, CPU_MASK, CPU_EN | CPU_PORT(port));
+
/* CPU port gets connected to all user ports of
* the switch
*/
@@ -1219,24 +1225,27 @@ mt7530_setup(struct dsa_switch *ds)
* as two netdev instances.
*/
dn = ds->ports[MT7530_CPU_PORT].master->dev.of_node->parent;
- priv->ethernet = syscon_node_to_regmap(dn);
- if (IS_ERR(priv->ethernet))
- return PTR_ERR(priv->ethernet);
- regulator_set_voltage(priv->core_pwr, 1000000, 1000000);
- ret = regulator_enable(priv->core_pwr);
- if (ret < 0) {
- dev_err(priv->dev,
- "Failed to enable core power: %d\n", ret);
- return ret;
- }
+ if (priv->id == ID_MT7530) {
+ priv->ethernet = syscon_node_to_regmap(dn);
+ if (IS_ERR(priv->ethernet))
+ return PTR_ERR(priv->ethernet);
+
+ regulator_set_voltage(priv->core_pwr, 1000000, 1000000);
+ ret = regulator_enable(priv->core_pwr);
+ if (ret < 0) {
+ dev_err(priv->dev,
+ "Failed to enable core power: %d\n", ret);
+ return ret;
+ }
- regulator_set_voltage(priv->io_pwr, 3300000, 3300000);
- ret = regulator_enable(priv->io_pwr);
- if (ret < 0) {
- dev_err(priv->dev, "Failed to enable io pwr: %d\n",
- ret);
- return ret;
+ regulator_set_voltage(priv->io_pwr, 3300000, 3300000);
+ ret = regulator_enable(priv->io_pwr);
+ if (ret < 0) {
+ dev_err(priv->dev, "Failed to enable io pwr: %d\n",
+ ret);
+ return ret;
+ }
}
/* Reset whole chip through gpio pin or memory-mapped registers for
@@ -1326,6 +1335,13 @@ static const struct dsa_switch_ops mt7530_switch_ops = {
.port_vlan_del = mt7530_port_vlan_del,
};
+static const struct of_device_id mt7530_of_match[] = {
+ { .compatible = "mediatek,mt7621", .data = (void *)ID_MT7621, },
+ { .compatible = "mediatek,mt7530", .data = (void *)ID_MT7530, },
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, mt7530_of_match);
+
static int
mt7530_probe(struct mdio_device *mdiodev)
{
@@ -1356,13 +1372,21 @@ mt7530_probe(struct mdio_device *mdiodev)
}
}
- priv->core_pwr = devm_regulator_get(&mdiodev->dev, "core");
- if (IS_ERR(priv->core_pwr))
- return PTR_ERR(priv->core_pwr);
+ /* Get the hardware identifier from the devicetree node.
+ * We will need it for some of the clock and regulator setup.
+ */
+ priv->id = (unsigned int)(unsigned long)
+ of_device_get_match_data(&mdiodev->dev);
- priv->io_pwr = devm_regulator_get(&mdiodev->dev, "io");
- if (IS_ERR(priv->io_pwr))
- return PTR_ERR(priv->io_pwr);
+ if (priv->id == ID_MT7530) {
+ priv->core_pwr = devm_regulator_get(&mdiodev->dev, "core");
+ if (IS_ERR(priv->core_pwr))
+ return PTR_ERR(priv->core_pwr);
+
+ priv->io_pwr = devm_regulator_get(&mdiodev->dev, "io");
+ if (IS_ERR(priv->io_pwr))
+ return PTR_ERR(priv->io_pwr);
+ }
/* Not MCM that indicates switch works as the remote standalone
* integrated circuit so the GPIO pin would be used to complete
@@ -1408,12 +1432,6 @@ mt7530_remove(struct mdio_device *mdiodev)
mutex_destroy(&priv->reg_mutex);
}
-static const struct of_device_id mt7530_of_match[] = {
- { .compatible = "mediatek,mt7530" },
- { /* sentinel */ },
-};
-MODULE_DEVICE_TABLE(of, mt7530_of_match);
-
static struct mdio_driver mt7530_mdio_driver = {
.probe = mt7530_probe,
.remove = mt7530_remove,
diff --git a/drivers/net/dsa/mt7530.h b/drivers/net/dsa/mt7530.h
index d9b407a22a58..a95ed958df5b 100644
--- a/drivers/net/dsa/mt7530.h
+++ b/drivers/net/dsa/mt7530.h
@@ -19,6 +19,11 @@
#define MT7530_NUM_FDB_RECORDS 2048
#define MT7530_ALL_MEMBERS 0xff
+enum {
+ ID_MT7530 = 0,
+ ID_MT7621 = 1,
+};
+
#define NUM_TRGMII_CTRL 5
#define TRGMII_BASE(x) (0x10000 + (x))
@@ -36,6 +41,9 @@
#define UNM_FFP(x) (((x) & 0xff) << 16)
#define UNU_FFP(x) (((x) & 0xff) << 8)
#define UNU_FFP_MASK UNU_FFP(~0)
+#define CPU_EN BIT(7)
+#define CPU_PORT(x) ((x) << 4)
+#define CPU_MASK (0xf << 4)
/* Registers for address table access */
#define MT7530_ATA1 0x74
@@ -430,6 +438,7 @@ struct mt7530_priv {
struct regulator *core_pwr;
struct regulator *io_pwr;
struct gpio_desc *reset;
+ unsigned int id;
bool mcm;
struct mt7530_port ports[MT7530_NUM_PORTS];
diff --git a/drivers/net/ethernet/mediatek/Kconfig b/drivers/net/ethernet/mediatek/Kconfig
index f9149d2a4694..43656f961891 100644
--- a/drivers/net/ethernet/mediatek/Kconfig
+++ b/drivers/net/ethernet/mediatek/Kconfig
@@ -1,6 +1,6 @@
config NET_VENDOR_MEDIATEK
bool "MediaTek ethernet driver"
- depends on ARCH_MEDIATEK
+ depends on ARCH_MEDIATEK || SOC_MT7621
---help---
If you have a Mediatek SoC with ethernet, say Y.
diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
index 49f926b7a91c..94d4663e3933 100644
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
@@ -1745,6 +1745,22 @@ static irqreturn_t mtk_handle_irq_tx(int irq, void *_eth)
return IRQ_HANDLED;
}
+static irqreturn_t mtk_handle_irq(int irq, void *_eth)
+{
+ struct mtk_eth *eth = _eth;
+
+ if (mtk_r32(eth, MTK_PDMA_INT_MASK) & MTK_RX_DONE_INT) {
+ if (mtk_r32(eth, MTK_PDMA_INT_STATUS) & MTK_RX_DONE_INT)
+ mtk_handle_irq_rx(irq, _eth);
+ }
+ if (mtk_r32(eth, MTK_QDMA_INT_MASK) & MTK_TX_DONE_INT) {
+ if (mtk_r32(eth, MTK_QMTK_INT_STATUS) & MTK_TX_DONE_INT)
+ mtk_handle_irq_tx(irq, _eth);
+ }
+
+ return IRQ_HANDLED;
+}
+
#ifdef CONFIG_NET_POLL_CONTROLLER
static void mtk_poll_controller(struct net_device *dev)
{
@@ -2485,7 +2501,10 @@ static int mtk_probe(struct platform_device *pdev)
}
for (i = 0; i < 3; i++) {
- eth->irq[i] = platform_get_irq(pdev, i);
+ if (MTK_HAS_CAPS(eth->soc->caps, MTK_SHARED_INT) && i > 0)
+ eth->irq[i] = eth->irq[0];
+ else
+ eth->irq[i] = platform_get_irq(pdev, i);
if (eth->irq[i] < 0) {
dev_err(&pdev->dev, "no IRQ%d resource found\n", i);
return -ENXIO;
@@ -2528,13 +2547,21 @@ static int mtk_probe(struct platform_device *pdev)
goto err_deinit_hw;
}
- err = devm_request_irq(eth->dev, eth->irq[1], mtk_handle_irq_tx, 0,
- dev_name(eth->dev), eth);
- if (err)
- goto err_free_dev;
+ if (MTK_HAS_CAPS(eth->soc->caps, MTK_SHARED_INT)) {
+ err = devm_request_irq(eth->dev, eth->irq[0],
+ mtk_handle_irq, 0,
+ dev_name(eth->dev), eth);
+ } else {
+ err = devm_request_irq(eth->dev, eth->irq[1],
+ mtk_handle_irq_tx, 0,
+ dev_name(eth->dev), eth);
+ if (err)
+ goto err_free_dev;
- err = devm_request_irq(eth->dev, eth->irq[2], mtk_handle_irq_rx, 0,
- dev_name(eth->dev), eth);
+ err = devm_request_irq(eth->dev, eth->irq[2],
+ mtk_handle_irq_rx, 0,
+ dev_name(eth->dev), eth);
+ }
if (err)
goto err_free_dev;
@@ -2607,6 +2634,12 @@ static const struct mtk_soc_data mt2701_data = {
.required_pctl = true,
};
+static const struct mtk_soc_data mt7621_data = {
+ .caps = MTK_SHARED_INT,
+ .required_clks = MT7621_CLKS_BITMAP,
+ .required_pctl = false,
+};
+
static const struct mtk_soc_data mt7622_data = {
.caps = MTK_DUAL_GMAC_SHARED_SGMII | MTK_GMAC1_ESW | MTK_HWLRO,
.required_clks = MT7622_CLKS_BITMAP,
@@ -2621,6 +2654,7 @@ static const struct mtk_soc_data mt7623_data = {
const struct of_device_id of_mtk_match[] = {
{ .compatible = "mediatek,mt2701-eth", .data = &mt2701_data},
+ { .compatible = "mediatek,mt7621-eth", .data = &mt7621_data},
{ .compatible = "mediatek,mt7622-eth", .data = &mt7622_data},
{ .compatible = "mediatek,mt7623-eth", .data = &mt7623_data},
{},
diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.h b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
index 46819297fc3e..f7501997cea0 100644
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
@@ -363,6 +363,7 @@
#define ETHSYS_CHIPID4_7 0x4
#define MT7623_ETH 7623
#define MT7622_ETH 7622
+#define MT7621_ETH 7621
/* ethernet subsystem config register */
#define ETHSYS_SYSCFG0 0x14
@@ -488,6 +489,8 @@ enum mtk_clks_map {
BIT(MTK_CLK_SGMII_CDR_FB) | \
BIT(MTK_CLK_SGMII_CK) | \
BIT(MTK_CLK_ETH2PLL))
+#define MT7621_CLKS_BITMAP (0)
+
enum mtk_dev_state {
MTK_HW_INIT,
MTK_RESETTING
@@ -567,6 +570,7 @@ struct mtk_rx_ring {
#define MTK_DUAL_GMAC_SHARED_SGMII (BIT(11) | MTK_GMAC1_SGMII | \
MTK_GMAC2_SGMII)
#define MTK_HWLRO BIT(12)
+#define MTK_SHARED_INT BIT(13)
#define MTK_HAS_CAPS(caps, _x) (((caps) & (_x)) == (_x))
/* struct mtk_eth_data - This is the structure holding all differences
generated by cgit v1.2.3 (git 2.39.1) at 2024-08-15 20:11:01 +0000