summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c24
-rw-r--r--drivers/net/ethernet/chelsio/cxgb4/t4_hw.c47
-rw-r--r--drivers/net/ethernet/chelsio/cxgb4vf/t4vf_hw.c6
3 files changed, 63 insertions, 14 deletions
diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c
index d07230c892a5..796043544fc3 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c
@@ -446,8 +446,10 @@ static void fw_caps_to_lmm(enum fw_port_type port_type,
unsigned long *link_mode_mask)
{
#define SET_LMM(__lmm_name) \
- __set_bit(ETHTOOL_LINK_MODE_ ## __lmm_name ## _BIT, \
- link_mode_mask)
+ do { \
+ __set_bit(ETHTOOL_LINK_MODE_ ## __lmm_name ## _BIT, \
+ link_mode_mask); \
+ } while (0)
#define FW_CAPS_TO_LMM(__fw_name, __lmm_name) \
do { \
@@ -541,7 +543,7 @@ static void fw_caps_to_lmm(enum fw_port_type port_type,
case FW_PORT_TYPE_CR4_QSFP:
SET_LMM(FIBRE);
FW_CAPS_TO_LMM(SPEED_1G, 1000baseT_Full);
- FW_CAPS_TO_LMM(SPEED_10G, 10000baseSR_Full);
+ FW_CAPS_TO_LMM(SPEED_10G, 10000baseKR_Full);
FW_CAPS_TO_LMM(SPEED_40G, 40000baseSR4_Full);
FW_CAPS_TO_LMM(SPEED_25G, 25000baseCR_Full);
FW_CAPS_TO_LMM(SPEED_50G, 50000baseCR2_Full);
@@ -552,6 +554,13 @@ static void fw_caps_to_lmm(enum fw_port_type port_type,
break;
}
+ if (fw_caps & FW_PORT_CAP32_FEC_V(FW_PORT_CAP32_FEC_M)) {
+ FW_CAPS_TO_LMM(FEC_RS, FEC_RS);
+ FW_CAPS_TO_LMM(FEC_BASER_RS, FEC_BASER);
+ } else {
+ SET_LMM(FEC_NONE);
+ }
+
FW_CAPS_TO_LMM(ANEG, Autoneg);
FW_CAPS_TO_LMM(802_3_PAUSE, Pause);
FW_CAPS_TO_LMM(802_3_ASM_DIR, Asym_Pause);
@@ -679,18 +688,15 @@ static int set_link_ksettings(struct net_device *dev,
base->autoneg == AUTONEG_DISABLE) {
fw_caps = speed_to_fw_caps(base->speed);
- /* Must only specify a single speed which must be supported
- * as part of the Physical Port Capabilities.
- */
- if ((fw_caps & (fw_caps - 1)) != 0 ||
- !(lc->pcaps & fw_caps))
+ /* Speed must be supported by Physical Port Capabilities. */
+ if (!(lc->pcaps & fw_caps))
return -EINVAL;
lc->speed_caps = fw_caps;
lc->acaps = fw_caps;
} else {
fw_caps =
- lmm_to_fw_caps(link_ksettings->link_modes.advertising);
+ lmm_to_fw_caps(link_ksettings->link_modes.advertising);
if (!(lc->pcaps & fw_caps))
return -EINVAL;
lc->speed_caps = 0;
diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
index 2b03f6187a24..c5e5466ee38b 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
@@ -4105,6 +4105,9 @@ static inline fw_port_cap32_t cc_to_fwcap_fec(enum cc_fec cc_fec)
* @mbox: the Firmware Mailbox to use
* @port: the Port ID
* @lc: the Port's Link Configuration
+ * @sleep_ok: if true we may sleep while awaiting command completion
+ * @timeout: time to wait for command to finish before timing out
+ * (negative implies @sleep_ok=false)
*
* Set up a port's MAC and PHY according to a desired link configuration.
* - If the PHY can auto-negotiate first decide what to advertise, then
@@ -4124,6 +4127,7 @@ int t4_link_l1cfg_core(struct adapter *adapter, unsigned int mbox,
int ret;
fw_mdi = (FW_PORT_CAP32_MDI_V(FW_PORT_CAP32_MDI_AUTO) & lc->pcaps);
+
/* Convert driver coding of Pause Frame Flow Control settings into the
* Firmware's API.
*/
@@ -4143,8 +4147,13 @@ int t4_link_l1cfg_core(struct adapter *adapter, unsigned int mbox,
fw_fec = cc_to_fwcap_fec(cc_fec);
/* Figure out what our Requested Port Capabilities are going to be.
+ * Note parallel structure in t4_handle_get_port_info() and
+ * init_link_config().
*/
if (!(lc->pcaps & FW_PORT_CAP32_ANEG)) {
+ if (lc->autoneg == AUTONEG_ENABLE)
+ return -EINVAL;
+
rcap = lc->acaps | fw_fc | fw_fec;
lc->fc = lc->requested_fc & ~PAUSE_AUTONEG;
lc->fec = cc_fec;
@@ -4156,7 +4165,11 @@ int t4_link_l1cfg_core(struct adapter *adapter, unsigned int mbox,
rcap = lc->acaps | fw_fc | fw_fec | fw_mdi;
}
- /* Note that older Firmware doesn't have FW_PORT_CAP32_FORCE_PAUSE, so
+ /* Some Requested Port Capabilities are trivially wrong if they exceed
+ * the Physical Port Capabilities. We can check that here and provide
+ * moderately useful feedback in the system log.
+ *
+ * Note that older Firmware doesn't have FW_PORT_CAP32_FORCE_PAUSE, so
* we need to exclude this from this check in order to maintain
* compatibility ...
*/
@@ -4185,6 +4198,13 @@ int t4_link_l1cfg_core(struct adapter *adapter, unsigned int mbox,
ret = t4_wr_mbox_meat_timeout(adapter, mbox, &cmd, sizeof(cmd), NULL,
sleep_ok, timeout);
+
+ /* Unfortunately, even if the Requested Port Capabilities "fit" within
+ * the Physical Port Capabilities, some combinations of features may
+ * still not be leagal. For example, 40Gb/s and Reed-Solomon Forward
+ * Error Correction. So if the Firmware rejects the L1 Configure
+ * request, flag that here.
+ */
if (ret) {
dev_err(adapter->pdev_dev,
"Requested Port Capabilities %#x rejected, error %d\n",
@@ -8461,6 +8481,10 @@ void t4_handle_get_port_info(struct port_info *pi, const __be64 *rpl)
fc = fwcap_to_cc_pause(linkattr);
speed = fwcap_to_speed(linkattr);
+ /* Reset state for communicating new Transceiver Module status and
+ * whether the OS-dependent layer wants us to redo the current
+ * "sticky" L1 Configure Link Parameters.
+ */
lc->new_module = false;
lc->redo_l1cfg = false;
@@ -8497,9 +8521,15 @@ void t4_handle_get_port_info(struct port_info *pi, const __be64 *rpl)
*/
pi->port_type = port_type;
+ /* Record new Module Type information.
+ */
pi->mod_type = mod_type;
+ /* Let the OS-dependent layer know if we have a new
+ * Transceiver Module inserted.
+ */
lc->new_module = t4_is_inserted_mod_type(mod_type);
+
t4_os_portmod_changed(adapter, pi->port_id);
}
@@ -8507,8 +8537,10 @@ void t4_handle_get_port_info(struct port_info *pi, const __be64 *rpl)
fc != lc->fc || fec != lc->fec) { /* something changed */
if (!link_ok && lc->link_ok) {
lc->link_down_rc = linkdnrc;
- dev_warn(adapter->pdev_dev, "Port %d link down, reason: %s\n",
- pi->tx_chan, t4_link_down_rc_str(linkdnrc));
+ dev_warn_ratelimited(adapter->pdev_dev,
+ "Port %d link down, reason: %s\n",
+ pi->tx_chan,
+ t4_link_down_rc_str(linkdnrc));
}
lc->link_ok = link_ok;
lc->speed = speed;
@@ -8518,6 +8550,11 @@ void t4_handle_get_port_info(struct port_info *pi, const __be64 *rpl)
lc->lpacaps = lpacaps;
lc->acaps = acaps & ADVERT_MASK;
+ /* If we're not physically capable of Auto-Negotiation, note
+ * this as Auto-Negotiation disabled. Otherwise, we track
+ * what Auto-Negotiation settings we have. Note parallel
+ * structure in t4_link_l1cfg_core() and init_link_config().
+ */
if (!(lc->acaps & FW_PORT_CAP32_ANEG)) {
lc->autoneg = AUTONEG_DISABLE;
} else if (lc->acaps & FW_PORT_CAP32_ANEG) {
@@ -8535,6 +8572,10 @@ void t4_handle_get_port_info(struct port_info *pi, const __be64 *rpl)
t4_os_link_changed(adapter, pi->port_id, link_ok);
}
+ /* If we have a new Transceiver Module and the OS-dependent code has
+ * told us that it wants us to redo whatever "sticky" L1 Configuration
+ * Link Parameters are set, do that now.
+ */
if (lc->new_module && lc->redo_l1cfg) {
struct link_config old_lc;
int ret;
diff --git a/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_hw.c b/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_hw.c
index 5b8c08cf523f..84dff74ca9cd 100644
--- a/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_hw.c
+++ b/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_hw.c
@@ -2005,8 +2005,10 @@ static void t4vf_handle_get_port_info(struct port_info *pi,
fc != lc->fc || fec != lc->fec) { /* something changed */
if (!link_ok && lc->link_ok) {
lc->link_down_rc = linkdnrc;
- dev_warn(adapter->pdev_dev, "Port %d link down, reason: %s\n",
- pi->port_id, t4vf_link_down_rc_str(linkdnrc));
+ dev_warn_ratelimited(adapter->pdev_dev,
+ "Port %d link down, reason: %s\n",
+ pi->port_id,
+ t4vf_link_down_rc_str(linkdnrc));
}
lc->link_ok = link_ok;
lc->speed = speed;