summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--Documentation/devicetree/bindings/net/micrel-ksz9021.txt49
-rw-r--r--drivers/net/phy/micrel.c103
2 files changed, 151 insertions, 1 deletions
diff --git a/Documentation/devicetree/bindings/net/micrel-ksz9021.txt b/Documentation/devicetree/bindings/net/micrel-ksz9021.txt
new file mode 100644
index 000000000000..997a63f1aea1
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/micrel-ksz9021.txt
@@ -0,0 +1,49 @@
+Micrel KSZ9021 Gigabit Ethernet PHY
+
+Some boards require special tuning values, particularly when it comes to
+clock delays. You can specify clock delay values by adding
+micrel-specific properties to an Ethernet OF device node.
+
+All skew control options are specified in picoseconds. The minimum
+value is 0, and the maximum value is 3000.
+
+Optional properties:
+ - rxc-skew-ps : Skew control of RXC pad
+ - rxdv-skew-ps : Skew control of RX CTL pad
+ - txc-skew-ps : Skew control of TXC pad
+ - txen-skew-ps : Skew control of TX_CTL pad
+ - rxd0-skew-ps : Skew control of RX data 0 pad
+ - rxd1-skew-ps : Skew control of RX data 1 pad
+ - rxd2-skew-ps : Skew control of RX data 2 pad
+ - rxd3-skew-ps : Skew control of RX data 3 pad
+ - txd0-skew-ps : Skew control of TX data 0 pad
+ - txd1-skew-ps : Skew control of TX data 1 pad
+ - txd2-skew-ps : Skew control of TX data 2 pad
+ - txd3-skew-ps : Skew control of TX data 3 pad
+
+Examples:
+
+ /* Attach to an Ethernet device with autodetected PHY */
+ &enet {
+ rxc-skew-ps = <3000>;
+ rxdv-skew-ps = <0>;
+ txc-skew-ps = <3000>;
+ txen-skew-ps = <0>;
+ status = "okay";
+ };
+
+ /* Attach to an explicitly-specified PHY */
+ mdio {
+ phy0: ethernet-phy@0 {
+ rxc-skew-ps = <3000>;
+ rxdv-skew-ps = <0>;
+ txc-skew-ps = <3000>;
+ txen-skew-ps = <0>;
+ reg = <0>;
+ };
+ };
+ ethernet@70000 {
+ status = "okay";
+ phy = <&phy0>;
+ phy-mode = "rgmii-id";
+ };
diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index 9ca494550186..c31aad0004cb 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -25,6 +25,7 @@
#include <linux/module.h>
#include <linux/phy.h>
#include <linux/micrel_phy.h>
+#include <linux/of.h>
/* Operation Mode Strap Override */
#define MII_KSZPHY_OMSO 0x16
@@ -53,6 +54,20 @@
#define KS8737_CTRL_INT_ACTIVE_HIGH (1 << 14)
#define KSZ8051_RMII_50MHZ_CLK (1 << 7)
+/* Write/read to/from extended registers */
+#define MII_KSZPHY_EXTREG 0x0b
+#define KSZPHY_EXTREG_WRITE 0x8000
+
+#define MII_KSZPHY_EXTREG_WRITE 0x0c
+#define MII_KSZPHY_EXTREG_READ 0x0d
+
+/* Extended registers */
+#define MII_KSZPHY_CLK_CONTROL_PAD_SKEW 0x104
+#define MII_KSZPHY_RX_DATA_PAD_SKEW 0x105
+#define MII_KSZPHY_TX_DATA_PAD_SKEW 0x106
+
+#define PS_TO_REG 200
+
static int ksz_config_flags(struct phy_device *phydev)
{
int regval;
@@ -65,6 +80,20 @@ static int ksz_config_flags(struct phy_device *phydev)
return 0;
}
+static int kszphy_extended_write(struct phy_device *phydev,
+ u32 regnum, u16 val)
+{
+ phy_write(phydev, MII_KSZPHY_EXTREG, KSZPHY_EXTREG_WRITE | regnum);
+ return phy_write(phydev, MII_KSZPHY_EXTREG_WRITE, val);
+}
+
+static int kszphy_extended_read(struct phy_device *phydev,
+ u32 regnum)
+{
+ phy_write(phydev, MII_KSZPHY_EXTREG, regnum);
+ return phy_read(phydev, MII_KSZPHY_EXTREG_READ);
+}
+
static int kszphy_ack_interrupt(struct phy_device *phydev)
{
/* bit[7..0] int status, which is a read and clear register. */
@@ -141,6 +170,78 @@ static int ks8051_config_init(struct phy_device *phydev)
return rc < 0 ? rc : 0;
}
+static int ksz9021_load_values_from_of(struct phy_device *phydev,
+ struct device_node *of_node, u16 reg,
+ char *field1, char *field2,
+ char *field3, char *field4)
+{
+ int val1 = -1;
+ int val2 = -2;
+ int val3 = -3;
+ int val4 = -4;
+ int newval;
+ int matches = 0;
+
+ if (!of_property_read_u32(of_node, field1, &val1))
+ matches++;
+
+ if (!of_property_read_u32(of_node, field2, &val2))
+ matches++;
+
+ if (!of_property_read_u32(of_node, field3, &val3))
+ matches++;
+
+ if (!of_property_read_u32(of_node, field4, &val4))
+ matches++;
+
+ if (!matches)
+ return 0;
+
+ if (matches < 4)
+ newval = kszphy_extended_read(phydev, reg);
+ else
+ newval = 0;
+
+ if (val1 != -1)
+ newval = ((newval & 0xfff0) | ((val1 / PS_TO_REG) & 0xf) << 0);
+
+ if (val2 != -1)
+ newval = ((newval & 0xff0f) | ((val2 / PS_TO_REG) & 0xf) << 4);
+
+ if (val3 != -1)
+ newval = ((newval & 0xf0ff) | ((val3 / PS_TO_REG) & 0xf) << 8);
+
+ if (val4 != -1)
+ newval = ((newval & 0x0fff) | ((val4 / PS_TO_REG) & 0xf) << 12);
+
+ return kszphy_extended_write(phydev, reg, newval);
+}
+
+static int ksz9021_config_init(struct phy_device *phydev)
+{
+ struct device *dev = &phydev->dev;
+ struct device_node *of_node = dev->of_node;
+
+ if (!of_node && dev->parent->of_node)
+ of_node = dev->parent->of_node;
+
+ if (of_node) {
+ ksz9021_load_values_from_of(phydev, of_node,
+ MII_KSZPHY_CLK_CONTROL_PAD_SKEW,
+ "txen-skew-ps", "txc-skew-ps",
+ "rxdv-skew-ps", "rxc-skew-ps");
+ ksz9021_load_values_from_of(phydev, of_node,
+ MII_KSZPHY_RX_DATA_PAD_SKEW,
+ "rxd0-skew-ps", "rxd1-skew-ps",
+ "rxd2-skew-ps", "rxd3-skew-ps");
+ ksz9021_load_values_from_of(phydev, of_node,
+ MII_KSZPHY_TX_DATA_PAD_SKEW,
+ "txd0-skew-ps", "txd1-skew-ps",
+ "txd2-skew-ps", "txd3-skew-ps");
+ }
+ return 0;
+}
+
#define KSZ8873MLL_GLOBAL_CONTROL_4 0x06
#define KSZ8873MLL_GLOBAL_CONTROL_4_DUPLEX (1 << 6)
#define KSZ8873MLL_GLOBAL_CONTROL_4_SPEED (1 << 4)
@@ -281,7 +382,7 @@ static struct phy_driver ksphy_driver[] = {
.name = "Micrel KSZ9021 Gigabit PHY",
.features = (PHY_GBIT_FEATURES | SUPPORTED_Pause),
.flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
- .config_init = kszphy_config_init,
+ .config_init = ksz9021_config_init,
.config_aneg = genphy_config_aneg,
.read_status = genphy_read_status,
.ack_interrupt = kszphy_ack_interrupt,