diff options
61 files changed, 1374 insertions, 1458 deletions
diff --git a/Documentation/RCU/Design/Data-Structures/Data-Structures.html b/Documentation/RCU/Design/Data-Structures/Data-Structures.html index 18f179807563..c30c1957c7e6 100644 --- a/Documentation/RCU/Design/Data-Structures/Data-Structures.html +++ b/Documentation/RCU/Design/Data-Structures/Data-Structures.html @@ -155,8 +155,7 @@ keeping lock contention under control at all tree levels regardless of the level of loading on the system. </p><p>RCU updaters wait for normal grace periods by registering -RCU callbacks, either directly via <tt>call_rcu()</tt> and -friends (namely <tt>call_rcu_bh()</tt> and <tt>call_rcu_sched()</tt>), +RCU callbacks, either directly via <tt>call_rcu()</tt> or indirectly via <tt>synchronize_rcu()</tt> and friends. RCU callbacks are represented by <tt>rcu_head</tt> structures, which are queued on <tt>rcu_data</tt> structures while they are diff --git a/Documentation/RCU/Design/Expedited-Grace-Periods/Expedited-Grace-Periods.html b/Documentation/RCU/Design/Expedited-Grace-Periods/Expedited-Grace-Periods.html index 19e7a5fb6b73..57300db4b5ff 100644 --- a/Documentation/RCU/Design/Expedited-Grace-Periods/Expedited-Grace-Periods.html +++ b/Documentation/RCU/Design/Expedited-Grace-Periods/Expedited-Grace-Periods.html @@ -56,6 +56,7 @@ sections. RCU-preempt Expedited Grace Periods</a></h2> <p> +<tt>CONFIG_PREEMPT=y</tt> kernels implement RCU-preempt. The overall flow of the handling of a given CPU by an RCU-preempt expedited grace period is shown in the following diagram: @@ -139,6 +140,7 @@ or offline, among other things. RCU-sched Expedited Grace Periods</a></h2> <p> +<tt>CONFIG_PREEMPT=n</tt> kernels implement RCU-sched. The overall flow of the handling of a given CPU by an RCU-sched expedited grace period is shown in the following diagram: @@ -146,7 +148,7 @@ expedited grace period is shown in the following diagram: <p> As with RCU-preempt, RCU-sched's -<tt>synchronize_sched_expedited()</tt> ignores offline and +<tt>synchronize_rcu_expedited()</tt> ignores offline and idle CPUs, again because they are in remotely detectable quiescent states. However, because the diff --git a/Documentation/RCU/Design/Memory-Ordering/Tree-RCU-Memory-Ordering.html b/Documentation/RCU/Design/Memory-Ordering/Tree-RCU-Memory-Ordering.html index 8d21af02b1f0..c64f8d26609f 100644 --- a/Documentation/RCU/Design/Memory-Ordering/Tree-RCU-Memory-Ordering.html +++ b/Documentation/RCU/Design/Memory-Ordering/Tree-RCU-Memory-Ordering.html @@ -34,12 +34,11 @@ Similarly, any code that happens before the beginning of a given RCU grace period is guaranteed to see the effects of all accesses following the end of that grace period that are within RCU read-side critical sections. -<p>This guarantee is particularly pervasive for <tt>synchronize_sched()</tt>, -for which RCU-sched read-side critical sections include any region +<p>Note well that RCU-sched read-side critical sections include any region of code for which preemption is disabled. Given that each individual machine instruction can be thought of as an extremely small region of preemption-disabled code, one can think of -<tt>synchronize_sched()</tt> as <tt>smp_mb()</tt> on steroids. +<tt>synchronize_rcu()</tt> as <tt>smp_mb()</tt> on steroids. <p>RCU updaters use this guarantee by splitting their updates into two phases, one of which is executed before the grace period and diff --git a/Documentation/RCU/NMI-RCU.txt b/Documentation/RCU/NMI-RCU.txt index 687777f83b23..881353fd5bff 100644 --- a/Documentation/RCU/NMI-RCU.txt +++ b/Documentation/RCU/NMI-RCU.txt @@ -81,18 +81,19 @@ currently executing on some other CPU. We therefore cannot free up any data structures used by the old NMI handler until execution of it completes on all other CPUs. -One way to accomplish this is via synchronize_sched(), perhaps as +One way to accomplish this is via synchronize_rcu(), perhaps as follows: unset_nmi_callback(); - synchronize_sched(); + synchronize_rcu(); kfree(my_nmi_data); -This works because synchronize_sched() blocks until all CPUs complete -any preemption-disabled segments of code that they were executing. -Since NMI handlers disable preemption, synchronize_sched() is guaranteed +This works because (as of v4.20) synchronize_rcu() blocks until all +CPUs complete any preemption-disabled segments of code that they were +executing. +Since NMI handlers disable preemption, synchronize_rcu() is guaranteed not to return until all ongoing NMI handlers exit. It is therefore safe -to free up the handler's data as soon as synchronize_sched() returns. +to free up the handler's data as soon as synchronize_rcu() returns. Important note: for this to work, the architecture in question must invoke nmi_enter() and nmi_exit() on NMI entry and exit, respectively. diff --git a/Documentation/RCU/UP.txt b/Documentation/RCU/UP.txt index 90ec5341ee98..53bde717017b 100644 --- a/Documentation/RCU/UP.txt +++ b/Documentation/RCU/UP.txt @@ -86,10 +86,8 @@ even on a UP system. So do not do it! Even on a UP system, the RCU infrastructure -must- respect grace periods, and -must- invoke callbacks from a known environment in which no locks are held. -It -is- safe for synchronize_sched() and synchronize_rcu_bh() to return -immediately on an UP system. It is also safe for synchronize_rcu() -to return immediately on UP systems, except when running preemptable -RCU. +Note that it -is- safe for synchronize_rcu() to return immediately on +UP systems, including !PREEMPT SMP builds running on UP systems. Quick Quiz #3: Why can't synchronize_rcu() return immediately on UP systems running preemptable RCU? diff --git a/Documentation/RCU/checklist.txt b/Documentation/RCU/checklist.txt index 6f469864d9f5..e98ff261a438 100644 --- a/Documentation/RCU/checklist.txt +++ b/Documentation/RCU/checklist.txt @@ -182,16 +182,13 @@ over a rather long period of time, but improvements are always welcome! when publicizing a pointer to a structure that can be traversed by an RCU read-side critical section. -5. If call_rcu(), or a related primitive such as call_rcu_bh(), - call_rcu_sched(), or call_srcu() is used, the callback function - will be called from softirq context. In particular, it cannot - block. +5. If call_rcu() or call_srcu() is used, the callback function will + be called from softirq context. In particular, it cannot block. -6. Since synchronize_rcu() can block, it cannot be called from - any sort of irq context. The same rule applies for - synchronize_rcu_bh(), synchronize_sched(), synchronize_srcu(), - synchronize_rcu_expedited(), synchronize_rcu_bh_expedited(), - synchronize_sched_expedite(), and synchronize_srcu_expedited(). +6. Since synchronize_rcu() can block, it cannot be called + from any sort of irq context. The same rule applies + for synchronize_srcu(), synchronize_rcu_expedited(), and + synchronize_srcu_expedited(). The expedited forms of these primitives have the same semantics as the non-expedited forms, but expediting is both expensive and @@ -212,20 +209,20 @@ over a rather long period of time, but improvements are always welcome! of the system, especially to real-time workloads running on the rest of the system. -7. If the updater uses call_rcu() or synchronize_rcu(), then the - corresponding readers must use rcu_read_lock() and - rcu_read_unlock(). If the updater uses call_rcu_bh() or - synchronize_rcu_bh(), then the corresponding readers must - use rcu_read_lock_bh() and rcu_read_unlock_bh(). If the - updater uses call_rcu_sched() or synchronize_sched(), then - the corresponding readers must disable preemption, possibly - by calling rcu_read_lock_sched() and rcu_read_unlock_sched(). - If the updater uses synchronize_srcu() or call_srcu(), then - the corresponding readers must use srcu_read_lock() and +7. As of v4.20, a given kernel implements only one RCU flavor, + which is RCU-sched for PREEMPT=n and RCU-preempt for PREEMPT=y. + If the updater uses call_rcu() or synchronize_rcu(), + then the corresponding readers my use rcu_read_lock() and + rcu_read_unlock(), rcu_read_lock_bh() and rcu_read_unlock_bh(), + or any pair of primitives that disables and re-enables preemption, + for example, rcu_read_lock_sched() and rcu_read_unlock_sched(). + If the updater uses synchronize_srcu() or call_srcu(), + then the corresponding readers must use srcu_read_lock() and srcu_read_unlock(), and with the same srcu_struct. The rules for the expedited primitives are the same as for their non-expedited counterparts. Mixing things up will result in confusion and - broken kernels. + broken kernels, and has even resulted in an exploitable security + issue. One exception to this rule: rcu_read_lock() and rcu_read_unlock() may be substituted for rcu_read_lock_bh() and rcu_read_unlock_bh() @@ -288,8 +285,7 @@ over a rather long period of time, but improvements are always welcome! d. Periodically invoke synchronize_rcu(), permitting a limited number of updates per grace period. - The same cautions apply to call_rcu_bh(), call_rcu_sched(), - call_srcu(), and kfree_rcu(). + The same cautions apply to call_srcu() and kfree_rcu(). Note that although these primitives do take action to avoid memory exhaustion when any given CPU has too many callbacks, a determined @@ -322,7 +318,7 @@ over a rather long period of time, but improvements are always welcome! 11. Any lock acquired by an RCU callback must be acquired elsewhere with softirq disabled, e.g., via spin_lock_irqsave(), - spin_lock_bh(), etc. Failing to disable irq on a given + spin_lock_bh(), etc. Failing to disable softirq on a given acquisition of that lock will result in deadlock as soon as the RCU softirq handler happens to run your RCU callback while interrupting that acquisition's critical section. @@ -335,13 +331,16 @@ over a rather long period of time, but improvements are always welcome! must use whatever locking or other synchronization is required to safely access and/or modify that data structure. - RCU callbacks are -usually- executed on the same CPU that executed - the corresponding call_rcu(), call_rcu_bh(), or call_rcu_sched(), - but are by -no- means guaranteed to be. For example, if a given - CPU goes offline while having an RCU callback pending, then that - RCU callback will execute on some surviving CPU. (If this was - not the case, a self-spawning RCU callback would prevent the - victim CPU from ever going offline.) + Do not assume that RCU callbacks will be executed on the same + CPU that executed the corresponding call_rcu() or call_srcu(). + For example, if a given CPU goes offline while having an RCU + callback pending, then that RCU callback will execute on some + surviving CPU. (If this was not the case, a self-spawning RCU + callback would prevent the victim CPU from ever going offline.) + Furthermore, CPUs designated by rcu_nocbs= might well -always- + have their RCU callbacks executed on some other CPUs, in fact, + for some real-time workloads, this is the whole point of using + the rcu_nocbs= kernel boot parameter. 13. Unlike other forms of RCU, it -is- permissible to block in an SRCU read-side critical section (demarked by srcu_read_lock() @@ -381,11 +380,11 @@ over a rather long period of time, but improvements are always welcome! SRCU's expedited primitive (synchronize_srcu_expedited()) never sends IPIs to other CPUs, so it is easier on - real-time workloads than is synchronize_rcu_expedited(), - synchronize_rcu_bh_expedited() or synchronize_sched_expedited(). + real-time workloads than is synchronize_rcu_expedited(). - Note that rcu_dereference() and rcu_assign_pointer() relate to - SRCU just as they do to other forms of RCU. + Note that rcu_assign_pointer() relates to SRCU just as it does to + other forms of RCU, but instead of rcu_dereference() you should + use srcu_dereference() in order to avoid lockdep splats. 14. The whole point of call_rcu(), synchronize_rcu(), and friends is to wait until all pre-existing readers have finished before @@ -405,6 +404,9 @@ over a rather long period of time, but improvements are always welcome! read-side critical sections. It is the responsibility of the RCU update-side primitives to deal with this. + For SRCU readers, you can use smp_mb__after_srcu_read_unlock() + immediately after an srcu_read_unlock() to get a full barrier. + 16. Use CONFIG_PROVE_LOCKING, CONFIG_DEBUG_OBJECTS_RCU_HEAD, and the __rcu sparse checks to validate your RCU code. These can help find problems as follows: @@ -428,22 +430,19 @@ over a rather long period of time, but improvements are always welcome! These debugging aids can help you find problems that are otherwise extremely difficult to spot. -17. If you register a callback using call_rcu(), call_rcu_bh(), - call_rcu_sched(), or call_srcu(), and pass in a function defined - within a loadable module, then it in necessary to wait for - all pending callbacks to be invoked after the last invocation - and before unloading that module. Note that it is absolutely - -not- sufficient to wait for a grace period! The current (say) - synchronize_rcu() implementation waits only for all previous - callbacks registered on the CPU that synchronize_rcu() is running - on, but it is -not- guaranteed to wait for callbacks registered - on other CPUs. +17. If you register a callback using call_rcu() or call_srcu(), and + pass in a function defined within a loadable module, then it in + necessary to wait for all pending callbacks to be invoked after + the last invocation and before unloading that module. Note that + it is absolutely -not- sufficient to wait for a grace period! + The current (say) synchronize_rcu() implementation is -not- + guaranteed to wait for callbacks registered on other CPUs. + Or even on the current CPU if that CPU recently went offline + and came back online. You instead need to use one of the barrier functions: o call_rcu() -> rcu_barrier() - o call_rcu_bh() -> rcu_barrier() - o call_rcu_sched() -> rcu_barrier() o call_srcu() -> srcu_barrier() However, these barrier functions are absolutely -not- guaranteed diff --git a/Documentation/RCU/rcu.txt b/Documentation/RCU/rcu.txt index 721b3e426515..c818cf65c5a9 100644 --- a/Documentation/RCU/rcu.txt +++ b/Documentation/RCU/rcu.txt @@ -52,10 +52,10 @@ o If I am running on a uniprocessor kernel, which can only do one o How can I see where RCU is currently used in the Linux kernel? Search for "rcu_read_lock", "rcu_read_unlock", "call_rcu", - "rcu_read_lock_bh", "rcu_read_unlock_bh", "call_rcu_bh", - "srcu_read_lock", "srcu_read_unlock", "synchronize_rcu", - "synchronize_net", "synchronize_srcu", and the other RCU - primitives. Or grab one of the cscope databases from: + "rcu_read_lock_bh", "rcu_read_unlock_bh", "srcu_read_lock", + "srcu_read_unlock", "synchronize_rcu", "synchronize_net", + "synchronize_srcu", and the other RCU primitives. Or grab one + of the cscope databases from: http://www.rdrop.com/users/paulmck/RCU/linuxusage/rculocktab.html diff --git a/Documentation/RCU/rcu_dereference.txt b/Documentation/RCU/rcu_dereference.txt index ab96227bad42..bf699e8cfc75 100644 --- a/Documentation/RCU/rcu_dereference.txt +++ b/Documentation/RCU/rcu_dereference.txt @@ -351,3 +351,106 @@ garbage values. In short, rcu_dereference() is -not- optional when you are going to dereference the resulting pointer. + + +WHICH MEMBER OF THE rcu_dereference() FAMILY SHOULD YOU USE? + +First, please avoid using rcu_dereference_raw() and also please avoid +using rcu_dereference_check() and rcu_dereference_protected() with a +second argument with a constant value of 1 (or true, for that matter). +With that caution out of the way, here is some guidance for which +member of the rcu_dereference() to use in various situations: + +1. If the access needs to be within an RCU read-side critical + section, use rcu_dereference(). With the new consolidated + RCU flavors, an RCU read-side critical section is entered + using rcu_read_lock(), anything that disables bottom halves, + anything that disables interrupts, or anything that disables + preemption. + +2. If the access might be within an RCU read-side critical section + on the one hand, or protected by (say) my_lock on the other, + use rcu_dereference_check(), for example: + + p1 = rcu_dereference_check(p->rcu_protected_pointer, + lockdep_is_held(&my_lock)); + + +3. If the access might be within an RCU read-side critical section + on the one hand, or protected by either my_lock or your_lock on + the other, again use rcu_dereference_check(), for example: + + p1 = rcu_dereference_check(p->rcu_protected_pointer, + lockdep_is_held(&my_lock) || + lockdep_is_held(&your_lock)); + +4. If the access is on the update side, so that it is always protected + by my_lock, use rcu_dereference_protected(): + + p1 = rcu_dereference_protected(p->rcu_protected_pointer, + lockdep_is_held(&my_lock)); + + This can be extended to handle multiple locks as in #3 above, + and both can be extended to check other conditions as well. + +5. If the protection is supplied by the caller, and is thus unknown + to this code, that is the rare case when rcu_dereference_raw() + is appropriate. In addition, rcu_dereference_raw() might be + appropriate when the lockdep expression would be excessively + complex, except that a better approach in that case might be to + take a long hard look at your synchronization design. Still, + there are data-locking cases where any one of a very large number + of locks or reference counters suffices to protect the pointer, + so rcu_dereference_raw() does have its place. + + However, its place is probably quite a bit smaller than one + might expect given the number of uses in the current kernel. + Ditto for its synonym, rcu_dereference_check( ... , 1), and + its close relative, rcu_dereference_protected(... , 1). + + +SPARSE CHECKING OF RCU-PROTECTED POINTERS + +The sparse static-analysis tool checks for direct access to RCU-protected +pointers, which can result in "interesting" bugs due to compiler +optimizations involving invented loads and perhaps also load tearing. +For example, suppose someone mistakenly does something like this: + + p = q->rcu_protected_pointer; + do_something_with(p->a); + do_something_else_with(p->b); + +If register pressure is high, the compiler might optimize "p" out +of existence, transforming the code to something like this: + + do_something_with(q->rcu_protected_pointer->a); + do_something_else_with(q->rcu_protected_pointer->b); + +This could fatally disappoint your code if q->rcu_protected_pointer +changed in the meantime. Nor is this a theoretical problem: Exactly +this sort of bug cost Paul E. McKenney (and several of his innocent +colleagues) a three-day weekend back in the early 1990s. + +Load tearing could of course result in dereferencing a mashup of a pair +of pointers, which also might fatally disappoint your code. + +These problems could have been avoided simply by making the code instead +read as follows: + + p = rcu_dereference(q->rcu_protected_pointer); + do_something_with(p->a); + do_something_else_with(p->b); + +Unfortunately, these sorts of bugs can be extremely hard to spot during +review. This is where the sparse tool comes into play, along with the +"__rcu" marker. If you mark a pointer declaration, whether in a structure +or as a formal parameter, with "__rcu", which tells sparse to complain if +this pointer is accessed directly. It will also cause sparse to complain +if a pointer not marked with "__rcu" is accessed using rcu_dereference() +and friends. For example, ->rcu_protected_pointer might be declared as +follows: + + struct foo __rcu *rcu_protected_pointer; + +Use of "__rcu" is opt-in. If you choose not to use it, then you should +ignore the sparse warnings. diff --git a/Documentation/RCU/rcubarrier.txt b/Documentation/RCU/rcubarrier.txt index 5d7759071a3e..a2782df69732 100644 --- a/Documentation/RCU/rcubarrier.txt +++ b/Documentation/RCU/rcubarrier.txt @@ -83,16 +83,15 @@ Pseudo-code using rcu_barrier() is as follows: 2. Execute rcu_barrier(). 3. Allow the module to be unloaded. -There are also rcu_barrier_bh(), rcu_barrier_sched(), and srcu_barrier() -functions for the other flavors of RCU, and you of course must match -the flavor of rcu_barrier() with that of call_rcu(). If your module -uses multiple flavors of call_rcu(), then it must also use multiple +There is also an srcu_barrier() function for SRCU, and you of course +must match the flavor of rcu_barrier() with that of call_rcu(). If your +module uses multiple flavors of call_rcu(), then it must also use multiple flavors of rcu_barrier() when unloading that module. For example, if -it uses call_rcu_bh(), call_srcu() on srcu_struct_1, and call_srcu() on +it uses call_rcu(), call_srcu() on srcu_struct_1, and call_srcu() on srcu_struct_2(), then the following three lines of code will be required when unloading: - 1 rcu_barrier_bh(); + 1 rcu_barrier(); 2 srcu_barrier(&srcu_struct_1); 3 srcu_barrier(&srcu_struct_2); @@ -185,12 +184,12 @@ module invokes call_rcu() from timers, you will need to first cancel all the timers, and only then invoke rcu_barrier() to wait for any remaining RCU callbacks to complete. -Of course, if you module uses call_rcu_bh(), you will need to invoke -rcu_barrier_bh() before unloading. Similarly, if your module uses -call_rcu_sched(), you will need to invoke rcu_barrier_sched() before -unloading. If your module uses call_rcu(), call_rcu_bh(), -and- -call_rcu_sched(), then you will need to invoke each of rcu_barrier(), -rcu_barrier_bh(), and rcu_barrier_sched(). +Of course, if you module uses call_rcu(), you will need to invoke +rcu_barrier() before unloading. Similarly, if your module uses +call_srcu(), you will need to invoke srcu_barrier() before unloading, +and on the same srcu_struct structure. If your module uses call_rcu() +-and- call_srcu(), then you will need to invoke rcu_barrier() -and- +srcu_barrier(). Implementing rcu_barrier() @@ -223,8 +222,8 @@ shown below. Note that the final "1" in on_each_cpu()'s argument list ensures that all the calls to rcu_barrier_func() will have completed before on_each_cpu() returns. Line 9 then waits for the completion. -This code was rewritten in 2008 to support rcu_barrier_bh() and -rcu_barrier_sched() in addition to the original rcu_barrier(). +This code was rewritten in 2008 and several times thereafter, but this +still gives the general idea. The rcu_barrier_func() runs on each CPU, where it invokes call_rcu() to post an RCU callback, as follows: diff --git a/Documentation/RCU/whatisRCU.txt b/Documentation/RCU/whatisRCU.txt index 1ace20815bb1..981651a8b65d 100644 --- a/Documentation/RCU/whatisRCU.txt +++ b/Documentation/RCU/whatisRCU.txt @@ -310,7 +310,7 @@ reader, updater, and reclaimer. rcu_assign_pointer() - +--------+ + +--------+ +---------------------->| reader |---------+ | +--------+ | | | | @@ -318,12 +318,12 @@ reader, updater, and reclaimer. | | | rcu_read_lock() | | | rcu_read_unlock() | rcu_dereference() | | - +---------+ | | - | updater |<---------------------+ | - +---------+ V + +---------+ | | + | updater |<----------------+ | + +---------+ V | +-----------+ +----------------------------------->| reclaimer | - +-----------+ + +-----------+ Defer: synchronize_rcu() & call_rcu() diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index 2b8ee90bb644..d377a2166b79 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -3623,7 +3623,9 @@ see CONFIG_RAS_CEC help text. rcu_nocbs= [KNL] - The argument is a cpu list, as described above. + The argument is a cpu list, as described above, + except that the string "all" can be used to + specify every CPU on the system. In kernels built with CONFIG_RCU_NOCB_CPU=y, set the specified list of CPUs to be no-callback CPUs. diff --git a/Documentation/atomic_t.txt b/Documentation/atomic_t.txt index 913396ac5824..dca3fb0554db 100644 --- a/Documentation/atomic_t.txt +++ b/Documentation/atomic_t.txt @@ -56,6 +56,23 @@ Barriers: smp_mb__{before,after}_atomic() +TYPES (signed vs unsigned) +----- + +While atomic_t, atomic_long_t and atomic64_t use int, long and s64 +respectively (for hysterical raisins), the kernel uses -fno-strict-overflow +(which implies -fwrapv) and defines signed overflow to behave like +2s-complement. + +Therefore, an explicitly unsigned variant of the atomic ops is strictly +unnecessary and we can simply cast, there is no UB. + +There was a bug in UBSAN prior to GCC-8 that would generate UB warnings for +signed types. + +With this we also conform to the C/C++ _Atomic behaviour and things like +P1236R1. + SEMANTICS --------- diff --git a/Documentation/kprobes.txt b/Documentation/kprobes.txt index 10f4499e677c..ee60e519438a 100644 --- a/Documentation/kprobes.txt +++ b/Documentation/kprobes.txt @@ -243,10 +243,10 @@ Optimization ^^^^^^^^^^^^ The Kprobe-optimizer doesn't insert the jump instruction immediately; -rather, it calls synchronize_sched() for safety first, because it's +rather, it calls synchronize_rcu() for safety first, because it's possible for a CPU to be interrupted in the middle of executing the -optimized region [3]_. As you know, synchronize_sched() can ensure -that all interruptions that were active when synchronize_sched() +optimized region [3]_. As you know, synchronize_rcu() can ensure +that all interruptions that were active when synchronize_rcu() was called are done, but only if CONFIG_PREEMPT=n. So, this version of kprobe optimization supports only kernels with CONFIG_PREEMPT=n [4]_. diff --git a/Documentation/translations/ko_KR/memory-barriers.txt b/Documentation/translations/ko_KR/memory-barriers.txt index 7f01fb1c1084..db0b9d8619f1 100644 --- a/Documentation/translations/ko_KR/memory-barriers.txt +++ b/Documentation/translations/ko_KR/memory-barriers.txt @@ -493,10 +493,8 @@ CPU ì—게 ê¸°ëŒ€í• ìˆ˜ 있는 ìµœì†Œí•œì˜ ë³´ìž¥ì‚¬í• ëª‡ê°€ì§€ê°€ 있습니 ì´ íƒ€ìž…ì˜ ì˜¤í¼ë ˆì´ì…˜ì€ ë‹¨ë°©í–¥ì˜ íˆ¬ê³¼ì„± 배리어처럼 ë™ìž‘합니다. ACQUIRE 오í¼ë ˆì´ì…˜ ë’¤ì˜ ëª¨ë“ ë©”ëª¨ë¦¬ 오í¼ë ˆì´ì…˜ë“¤ì´ ACQUIRE 오í¼ë ˆì´ì…˜ í›„ì— ì¼ì–´ë‚œ 것으로 ì‹œìŠ¤í…œì˜ ë‚˜ë¨¸ì§€ ì»´í¬ë„ŒíŠ¸ë“¤ì— ë³´ì´ê²Œ ë ê²ƒì´ ë³´ìž¥ë©ë‹ˆë‹¤. - LOCK 오í¼ë ˆì´ì…˜ê³¼ smp_load_acquire(), smp_cond_acquire() 오í¼ë ˆì´ì…˜ë„ - ACQUIRE 오í¼ë ˆì´ì…˜ì— í¬í•¨ë©ë‹ˆë‹¤. smp_cond_acquire() 오í¼ë ˆì´ì…˜ì€ 컨트롤 - ì˜ì¡´ì„±ê³¼ smp_rmb() 를 사용해서 ACQUIRE ì˜ ì˜ë¯¸ì 요구사í•(semantic)ì„ - 충족시킵니다. + LOCK 오í¼ë ˆì´ì…˜ê³¼ smp_load_acquire(), smp_cond_load_acquire() 오í¼ë ˆì´ì…˜ë„ + ACQUIRE 오í¼ë ˆì´ì…˜ì— í¬í•¨ë©ë‹ˆë‹¤. ACQUIRE 오í¼ë ˆì´ì…˜ ì•žì˜ ë©”ëª¨ë¦¬ 오í¼ë ˆì´ì…˜ë“¤ì€ ACQUIRE 오í¼ë ˆì´ì…˜ 완료 í›„ì— ìˆ˜í–‰ëœ ê²ƒì²˜ëŸ¼ ë³´ì¼ ìˆ˜ 있습니다. @@ -2146,33 +2144,40 @@ set_current_state() 는 다ìŒì˜ 것들로 ê°ì‹¸ì§ˆ ìˆ˜ë„ ìžˆìŠµë‹ˆë‹¤: event_indicated = 1; wake_up_process(event_daemon); -wake_up() ë¥˜ì— ì˜í•´ 쓰기 메모리 배리어가 ë‚´í¬ë©ë‹ˆë‹¤. 만약 ê·¸ê²ƒë“¤ì´ ë”가를 -깨운다면요. ì´ ë°°ë¦¬ì–´ëŠ” íƒœìŠ¤í¬ ìƒíƒœê°€ 지워지기 ì „ì— ìˆ˜í–‰ë˜ë¯€ë¡œ, ì´ë²¤íŠ¸ë¥¼ -알리기 위한 STORE 와 íƒœìŠ¤í¬ ìƒíƒœë¥¼ TASK_RUNNING 으로 ì„¤ì •í•˜ëŠ” STORE 사ì´ì— -위치하게 ë©ë‹ˆë‹¤. +wake_up() ì´ ë¬´ì–¸ê°€ë¥¼ 깨우게 ë˜ë©´, ì´ í•¨ìˆ˜ëŠ” 범용 메모리 배리어를 수행합니다. +ì´ í•¨ìˆ˜ê°€ ì•„ë¬´ê²ƒë„ ê¹¨ìš°ì§€ 않는다면 메모리 배리어는 수행ë 수ë„, 수행ë˜ì§€ ì•Šì„ +ìˆ˜ë„ ìžˆìŠµë‹ˆë‹¤; ì´ ê²½ìš°ì— ë©”ëª¨ë¦¬ 배리어를 ìˆ˜í–‰í• ê±°ë¼ ì˜¤í•´í•´ì„ ì•ˆë©ë‹ˆë‹¤. ì´ +배리어는 íƒœìŠ¤í¬ ìƒíƒœê°€ ì ‘ê·¼ë˜ê¸° ì „ì— ìˆ˜í–‰ë˜ëŠ”ë°, ìžì„¸ížˆ ë§í•˜ë©´ ì´ ì´ë²¤íŠ¸ë¥¼ +알리기 위한 STORE 와 TASK_RUNNING 으로 ìƒíƒœë¥¼ 쓰는 STORE 사ì´ì— 수행ë©ë‹ˆë‹¤: - CPU 1 CPU 2 + CPU 1 (Sleeper) CPU 2 (Waker) =============================== =============================== set_current_state(); STORE event_indicated smp_store_mb(); wake_up(); - STORE current->state <쓰기 배리어> - <범용 배리어> STORE current->state - LOAD event_indicated + STORE current->state ... + <범용 배리어> <범용 배리어> + LOAD event_indicated if ((LOAD task->state) & TASK_NORMAL) + STORE task->state -í•œë²ˆë” ë§í•©ë‹ˆë‹¤ë§Œ, ì´ ì“°ê¸° 메모리 배리어는 ì´ ì½”ë“œê°€ ì •ë§ë¡œ ë”가를 깨울 ë•Œì—만 -실행ë©ë‹ˆë‹¤. ì´ê±¸ 설명하기 위해, X 와 Y 는 ëª¨ë‘ 0 으로 초기화 ë˜ì–´ 있다는 ê°€ì • -í•˜ì— ì•„ëž˜ì˜ ì´ë²¤íŠ¸ 시퀀스를 ìƒê°í•´ 봅시다: +여기서 "task" 는 깨어나지는 ì“°ë ˆë“œì´ê³ CPU 1 ì˜ "current" 와 같습니다. + +반복하지만, wake_up() ì´ ë¬´ì–¸ê°€ë¥¼ ì •ë§ ê¹¨ìš´ë‹¤ë©´ 범용 메모리 배리어가 수행ë +ê²ƒì´ ë³´ìž¥ë˜ì§€ë§Œ, ê·¸ë ‡ì§€ 않다면 그런 ë³´ìž¥ì´ ì—†ìŠµë‹ˆë‹¤. ì´ê±¸ ì´í•´í•˜ê¸° 위해, X 와 +Y 는 ëª¨ë‘ 0 으로 초기화 ë˜ì–´ 있다는 ê°€ì • í•˜ì— ì•„ëž˜ì˜ ì´ë²¤íŠ¸ 시퀀스를 ìƒê°í•´ +봅시다: CPU 1 CPU 2 =============================== =============================== - X = 1; STORE event_indicated + X = 1; Y = 1; smp_mb(); wake_up(); - Y = 1; wait_event(wq, Y == 1); - wake_up(); load from Y sees 1, no memory barrier - load from X might see 0 + LOAD Y LOAD X + +ì •ë§ë¡œ 깨우기가 행해졌다면, ë‘ ë¡œë“œ 중 (최소한) 하나는 1 ì„ ë³´ê²Œ ë©ë‹ˆë‹¤. +반면ì—, ì‹¤ì œ 깨우기가 행해지지 않았다면, ë‘ ë¡œë“œ ëª¨ë‘ 0ì„ ë³¼ ìˆ˜ë„ ìžˆìŠµë‹ˆë‹¤. -위 ì˜ˆì œì—ì„œì˜ ê²½ìš°ì™€ 달리 깨우기가 ì •ë§ë¡œ 행해졌다면, CPU 2 ì˜ X 로드는 1 ì„ -ë³¸ë‹¤ê³ ë³´ìž¥ë 수 ìžˆì„ ê²ë‹ˆë‹¤. +wake_up_process() 는 í•ìƒ 범용 메모리 배리어를 수행합니다. ì´ ë°°ë¦¬ì–´ ì—ì‹œ +íƒœìŠ¤í¬ ìƒíƒœê°€ ì ‘ê·¼ë˜ê¸° ì „ì— ìˆ˜í–‰ë©ë‹ˆë‹¤. 특히, ì•žì˜ ì˜ˆì œ 코드ì—ì„œ wake_up() ì´ +wake_up_process() ë¡œ 대체ëœë‹¤ë©´ ë‘ ë¡œë“œ 중 하나는 1ì„ ë³¼ ê²ƒì´ ë³´ìž¥ë©ë‹ˆë‹¤. 사용 가능한 깨우기류 함수들로 다ìŒê³¼ ê°™ì€ ê²ƒë“¤ì´ ìžˆìŠµë‹ˆë‹¤: @@ -2192,6 +2197,8 @@ wake_up() ë¥˜ì— ì˜í•´ 쓰기 메모리 배리어가 ë‚´í¬ë©ë‹ˆë‹¤. 만약 ê wake_up_poll(); wake_up_process(); +메모리 순서규칙 ê´€ì ì—ì„œ, ì´ í•¨ìˆ˜ë“¤ì€ ëª¨ë‘ wake_up() ê³¼ 같거나 보다 ê°•í•œ 순서 +ë³´ìž¥ì„ ì œê³µí•©ë‹ˆë‹¤. [!] ìž ìž¬ìš°ëŠ” 코드와 깨우는 ì½”ë“œì— ë‚´í¬ë˜ëŠ” 메모리 ë°°ë¦¬ì–´ë“¤ì€ ê¹¨ìš°ê¸° ì „ì— ì´ë£¨ì–´ì§„ ìŠ¤í† ì–´ë¥¼ ìž ìž¬ìš°ëŠ” 코드가 set_current_state() 를 호출한 í›„ì— í–‰í•˜ëŠ” diff --git a/MAINTAINERS b/MAINTAINERS index d18b4d62cc21..fe6f13766aeb 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -8993,7 +8993,7 @@ R: Daniel Lustig <dlustig@nvidia.com> L: linux-kernel@vger.kernel.org L: linux-arch@vger.kernel.org S: Supported -T: git git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu.git dev F: tools/memory-model/ F: Documentation/atomic_bitops.txt F: Documentation/atomic_t.txt @@ -13041,9 +13041,9 @@ M: Josh Triplett <josh@joshtriplett.org> R: Steven Rostedt <rostedt@goodmis.org> R: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> R: Lai Jiangshan <jiangshanlai@gmail.com> -L: linux-kernel@vger.kernel.org +L: rcu@vger.kernel.org S: Supported -T: git git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu.git dev F: tools/testing/selftests/rcutorture RDC R-321X SoC @@ -13089,10 +13089,10 @@ R: Steven Rostedt <rostedt@goodmis.org> R: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> R: Lai Jiangshan <jiangshanlai@gmail.com> R: Joel Fernandes <joel@joelfernandes.org> -L: linux-kernel@vger.kernel.org +L: rcu@vger.kernel.org W: http://www.rdrop.com/users/paulmck/RCU/ S: Supported -T: git git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu.git dev F: Documentation/RCU/ X: Documentation/RCU/torture.txt F: include/linux/rcu* @@ -14244,10 +14244,10 @@ M: "Paul E. McKenney" <paulmck@linux.ibm.com> M: Josh Triplett <josh@joshtriplett.org> R: Steven Rostedt <rostedt@goodmis.org> R: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> -L: linux-kernel@vger.kernel.org +L: rcu@vger.kernel.org W: http://www.rdrop.com/users/paulmck/RCU/ S: Supported -T: git git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu.git dev F: include/linux/srcu*.h F: kernel/rcu/srcu*.c @@ -15694,7 +15694,7 @@ M: "Paul E. McKenney" <paulmck@linux.ibm.com> M: Josh Triplett <josh@joshtriplett.org> L: linux-kernel@vger.kernel.org S: Supported -T: git git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu.git dev F: Documentation/RCU/torture.txt F: kernel/torture.c F: kernel/rcu/rcutorture.c diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c index 2c43e12b70af..6265d9225ec8 100644 --- a/drivers/nvme/host/core.c +++ b/drivers/nvme/host/core.c @@ -388,7 +388,7 @@ static void nvme_free_ns_head(struct kref *ref) nvme_mpath_remove_disk(head); ida_simple_remove(&head->subsys->ns_ida, head->instance); list_del_init(&head->entry); - cleanup_srcu_struct_quiesced(&head->srcu); + cleanup_srcu_struct(&head->srcu); nvme_put_subsystem(head->subsys); kfree(head); } diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h index 6cdb1db776cf..922bb6848813 100644 --- a/include/linux/rcupdate.h +++ b/include/linux/rcupdate.h @@ -878,9 +878,11 @@ static inline void rcu_head_init(struct rcu_head *rhp) static inline bool rcu_head_after_call_rcu(struct rcu_head *rhp, rcu_callback_t f) { - if (READ_ONCE(rhp->func) == f) + rcu_callback_t func = READ_ONCE(rhp->func); + + if (func == f) return true; - WARN_ON_ONCE(READ_ONCE(rhp->func) != (rcu_callback_t)~0L); + WARN_ON_ONCE(func != (rcu_callback_t)~0L); return false; } diff --git a/include/linux/srcu.h b/include/linux/srcu.h index c495b2d51569..e432cc92c73d 100644 --- a/include/linux/srcu.h +++ b/include/linux/srcu.h @@ -56,45 +56,11 @@ struct srcu_struct { }; void call_srcu(struct srcu_struct *ssp, struct rcu_head *head, void (*func)(struct rcu_head *head)); -void _cleanup_srcu_struct(struct srcu_struct *ssp, bool quiesced); +void cleanup_srcu_struct(struct srcu_struct *ssp); int __srcu_read_lock(struct srcu_struct *ssp) __acquires(ssp); void __srcu_read_unlock(struct srcu_struct *ssp, int idx) __releases(ssp); void synchronize_srcu(struct srcu_struct *ssp); -/** - * cleanup_srcu_struct - deconstruct a sleep-RCU structure - * @ssp: structure to clean up. - * - * Must invoke this after you are finished using a given srcu_struct that - * was initialized via init_srcu_struct(), else you leak memory. - */ -static inline void cleanup_srcu_struct(struct srcu_struct *ssp) -{ - _cleanup_srcu_struct(ssp, false); -} - -/** - * cleanup_srcu_struct_quiesced - deconstruct a quiesced sleep-RCU structure - * @ssp: structure to clean up. - * - * Must invoke this after you are finished using a given srcu_struct that - * was initialized via init_srcu_struct(), else you leak memory. Also, - * all grace-period processing must have completed. - * - * "Completed" means that the last synchronize_srcu() and - * synchronize_srcu_expedited() calls must have returned before the call - * to cleanup_srcu_struct_quiesced(). It also means that the callback - * from the last call_srcu() must have been invoked before the call to - * cleanup_srcu_struct_quiesced(), but you can use srcu_barrier() to help - * with this last. Violating these rules will get you a WARN_ON() splat - * (with high probability, anyway), and will also cause the srcu_struct - * to be leaked. - */ -static inline void cleanup_srcu_struct_quiesced(struct srcu_struct *ssp) -{ - _cleanup_srcu_struct(ssp, true); -} - #ifdef CONFIG_DEBUG_LOCK_ALLOC /** diff --git a/kernel/locking/locktorture.c b/kernel/locking/locktorture.c index ad40a2617063..80a463d31a8d 100644 --- a/kernel/locking/locktorture.c +++ b/kernel/locking/locktorture.c @@ -829,7 +829,9 @@ static void lock_torture_cleanup(void) "End of test: SUCCESS"); kfree(cxt.lwsa); + cxt.lwsa = NULL; kfree(cxt.lrsa); + cxt.lrsa = NULL; end: torture_cleanup_end(); diff --git a/kernel/rcu/rcu.h b/kernel/rcu/rcu.h index acee72c0b24b..4b58c907b4b7 100644 --- a/kernel/rcu/rcu.h +++ b/kernel/rcu/rcu.h @@ -233,6 +233,7 @@ static inline bool __rcu_reclaim(const char *rn, struct rcu_head *head) #ifdef CONFIG_RCU_STALL_COMMON extern int rcu_cpu_stall_suppress; +extern int rcu_cpu_stall_timeout; int rcu_jiffies_till_stall_check(void); #define rcu_ftrace_dump_stall_suppress() \ diff --git a/kernel/rcu/rcuperf.c b/kernel/rcu/rcuperf.c index c29761152874..7a6890b23c5f 100644 --- a/kernel/rcu/rcuperf.c +++ b/kernel/rcu/rcuperf.c @@ -494,6 +494,10 @@ rcu_perf_cleanup(void) if (torture_cleanup_begin()) return; + if (!cur_ops) { + torture_cleanup_end(); + return; + } if (reader_tasks) { for (i = 0; i < nrealreaders; i++) @@ -614,6 +618,7 @@ rcu_perf_init(void) pr_cont("\n"); WARN_ON(!IS_MODULE(CONFIG_RCU_PERF_TEST)); firsterr = -EINVAL; + cur_ops = NULL; goto unwind; } if (cur_ops->init) diff --git a/kernel/rcu/rcutorture.c b/kernel/rcu/rcutorture.c index f14d1b18a74f..efaa5b3f4d3f 100644 --- a/kernel/rcu/rcutorture.c +++ b/kernel/rcu/rcutorture.c @@ -299,7 +299,6 @@ struct rcu_torture_ops { int irq_capable; int can_boost; int extendables; - int ext_irq_conflict; const char *name; }; @@ -592,12 +591,7 @@ static void srcu_torture_init(void) static void srcu_torture_cleanup(void) { - static DEFINE_TORTURE_RANDOM(rand); - - if (torture_random(&rand) & 0x800) - cleanup_srcu_struct(&srcu_ctld); - else - cleanup_srcu_struct_quiesced(&srcu_ctld); + cleanup_srcu_struct(&srcu_ctld); srcu_ctlp = &srcu_ctl; /* In case of a later rcutorture run. */ } @@ -1160,7 +1154,7 @@ rcutorture_extend_mask(int oldmask, struct torture_random_state *trsp) unsigned long randmask2 = randmask1 >> 3; WARN_ON_ONCE(mask >> RCUTORTURE_RDR_SHIFT); - /* Most of the time lots of bits, half the time only one bit. */ + /* Mostly only one bit (need preemption!), sometimes lots of bits. */ if (!(randmask1 & 0x7)) mask = mask & randmask2; else @@ -1170,10 +1164,6 @@ rcutorture_extend_mask(int oldmask, struct torture_random_state *trsp) ((!(mask & RCUTORTURE_RDR_BH) && (oldmask & RCUTORTURE_RDR_BH)) || (!(mask & RCUTORTURE_RDR_RBH) && (oldmask & RCUTORTURE_RDR_RBH)))) mask |= RCUTORTURE_RDR_BH | RCUTORTURE_RDR_RBH; - if ((mask & RCUTORTURE_RDR_IRQ) && - !(mask & cur_ops->ext_irq_conflict) && - (oldmask & cur_ops->ext_irq_conflict)) - mask |= cur_ops->ext_irq_conflict; /* Or if readers object. */ return mask ?: RCUTORTURE_RDR_RCU; } @@ -1848,7 +1838,7 @@ static int rcutorture_oom_notify(struct notifier_block *self, WARN(1, "%s invoked upon OOM during forward-progress testing.\n", __func__); rcu_torture_fwd_cb_hist(); - rcu_fwd_progress_check(1 + (jiffies - READ_ONCE(rcu_fwd_startat) / 2)); + rcu_fwd_progress_check(1 + (jiffies - READ_ONCE(rcu_fwd_startat)) / 2); WRITE_ONCE(rcu_fwd_emergency_stop, true); smp_mb(); /* Emergency stop before free and wait to avoid hangs. */ pr_info("%s: Freed %lu RCU callbacks.\n", @@ -2094,6 +2084,10 @@ rcu_torture_cleanup(void) cur_ops->cb_barrier(); return; } + if (!cur_ops) { + torture_cleanup_end(); + return; + } rcu_torture_barrier_cleanup(); torture_stop_kthread(rcu_torture_fwd_prog, fwd_prog_task); @@ -2267,6 +2261,7 @@ rcu_torture_init(void) pr_cont("\n"); WARN_ON(!IS_MODULE(CONFIG_RCU_TORTURE_TEST)); firsterr = -EINVAL; + cur_ops = NULL; goto unwind; } if (cur_ops->fqs == NULL && fqs_duration != 0) { diff --git a/kernel/rcu/srcutiny.c b/kernel/rcu/srcutiny.c index 5d4a39a6505a..44d6606b8325 100644 --- a/kernel/rcu/srcutiny.c +++ b/kernel/rcu/srcutiny.c @@ -76,19 +76,16 @@ EXPORT_SYMBOL_GPL(init_srcu_struct); * Must invoke this after you are finished using a given srcu_struct that * was initialized via init_srcu_struct(), else you leak memory. */ -void _cleanup_srcu_struct(struct srcu_struct *ssp, bool quiesced) +void cleanup_srcu_struct(struct srcu_struct *ssp) { WARN_ON(ssp->srcu_lock_nesting[0] || ssp->srcu_lock_nesting[1]); - if (quiesced) - WARN_ON(work_pending(&ssp->srcu_work)); - else - flush_work(&ssp->srcu_work); + flush_work(&ssp->srcu_work); WARN_ON(ssp->srcu_gp_running); WARN_ON(ssp->srcu_gp_waiting); WARN_ON(ssp->srcu_cb_head); WARN_ON(&ssp->srcu_cb_head != ssp->srcu_cb_tail); } -EXPORT_SYMBOL_GPL(_cleanup_srcu_struct); +EXPORT_SYMBOL_GPL(cleanup_srcu_struct); /* * Removes the count for the old reader from the appropriate element of diff --git a/kernel/rcu/srcutree.c b/kernel/rcu/srcutree.c index a60b8ba9e1ac..9b761e546de8 100644 --- a/kernel/rcu/srcutree.c +++ b/kernel/rcu/srcutree.c @@ -360,8 +360,14 @@ static unsigned long srcu_get_delay(struct srcu_struct *ssp) return SRCU_INTERVAL; } -/* Helper for cleanup_srcu_struct() and cleanup_srcu_struct_quiesced(). */ -void _cleanup_srcu_struct(struct srcu_struct *ssp, bool quiesced) +/** + * cleanup_srcu_struct - deconstruct a sleep-RCU structure + * @ssp: structure to clean up. + * + * Must invoke this after you are finished using a given srcu_struct that + * was initialized via init_srcu_struct(), else you leak memory. + */ +void cleanup_srcu_struct(struct srcu_struct *ssp) { int cpu; @@ -369,24 +375,14 @@ void _cleanup_srcu_struct(struct srcu_struct *ssp, bool quiesced) return; /* Just leak it! */ if (WARN_ON(srcu_readers_active(ssp))) return; /* Just leak it! */ - if (quiesced) { - if (WARN_ON(delayed_work_pending(&ssp->work))) - return; /* Just leak it! */ - } else { - flush_delayed_work(&ssp->work); - } + flush_delayed_work(&ssp->work); for_each_possible_cpu(cpu) { struct srcu_data *sdp = per_cpu_ptr(ssp->sda, cpu); - if (quiesced) { - if (WARN_ON(timer_pending(&sdp->delay_work))) - return; /* Just leak it! */ - if (WARN_ON(work_pending(&sdp->work))) - return; /* Just leak it! */ - } else { - del_timer_sync(&sdp->delay_work); - flush_work(&sdp->work); - } + del_timer_sync(&sdp->delay_work); + flush_work(&sdp->work); + if (WARN_ON(rcu_segcblist_n_cbs(&sdp->srcu_cblist))) + return; /* Forgot srcu_barrier(), so just leak it! */ } if (WARN_ON(rcu_seq_state(READ_ONCE(ssp->srcu_gp_seq)) != SRCU_STATE_IDLE) || WARN_ON(srcu_readers_active(ssp))) { @@ -397,7 +393,7 @@ void _cleanup_srcu_struct(struct srcu_struct *ssp, bool quiesced) free_percpu(ssp->sda); ssp->sda = NULL; } -EXPORT_SYMBOL_GPL(_cleanup_srcu_struct); +EXPORT_SYMBOL_GPL(cleanup_srcu_struct); /* * Counts the new reader in the appropriate per-CPU element of the diff --git a/kernel/rcu/tiny.c b/kernel/rcu/tiny.c index 911bd9076d43..477b4eb44af5 100644 --- a/kernel/rcu/tiny.c +++ b/kernel/rcu/tiny.c @@ -52,7 +52,7 @@ void rcu_qs(void) local_irq_save(flags); if (rcu_ctrlblk.donetail != rcu_ctrlblk.curtail) { rcu_ctrlblk.donetail = rcu_ctrlblk.curtail; - raise_softirq(RCU_SOFTIRQ); + raise_softirq_irqoff(RCU_SOFTIRQ); } local_irq_restore(flags); } diff --git a/kernel/rcu/tree.c b/kernel/rcu/tree.c index acd6ccf56faf..ec77ec336f58 100644 --- a/kernel/rcu/tree.c +++ b/kernel/rcu/tree.c @@ -102,11 +102,6 @@ int rcu_num_lvls __read_mostly = RCU_NUM_LVLS; /* Number of rcu_nodes at specified level. */ int num_rcu_lvl[] = NUM_RCU_LVL_INIT; int rcu_num_nodes __read_mostly = NUM_RCU_NODES; /* Total # rcu_nodes in use. */ -/* panic() on RCU Stall sysctl. */ -int sysctl_panic_on_rcu_stall __read_mostly; -/* Commandeer a sysrq key to dump RCU's tree. */ -static bool sysrq_rcu; -module_param(sysrq_rcu, bool, 0444); /* * The rcu_scheduler_active variable is initialized to the value @@ -149,7 +144,7 @@ static void sync_sched_exp_online_cleanup(int cpu); /* rcuc/rcub kthread realtime priority */ static int kthread_prio = IS_ENABLED(CONFIG_RCU_BOOST) ? 1 : 0; -module_param(kthread_prio, int, 0644); +module_param(kthread_prio, int, 0444); /* Delay in jiffies for grace-period initialization delays, debug only. */ @@ -406,7 +401,7 @@ static bool rcu_kick_kthreads; */ static ulong jiffies_till_sched_qs = ULONG_MAX; module_param(jiffies_till_sched_qs, ulong, 0444); -static ulong jiffies_to_sched_qs; /* Adjusted version of above if not default */ +static ulong jiffies_to_sched_qs; /* See adjust_jiffies_till_sched_qs(). */ module_param(jiffies_to_sched_qs, ulong, 0444); /* Display only! */ /* @@ -424,6 +419,7 @@ static void adjust_jiffies_till_sched_qs(void) WRITE_ONCE(jiffies_to_sched_qs, jiffies_till_sched_qs); return; } + /* Otherwise, set to third fqs scan, but bound below on large system. */ j = READ_ONCE(jiffies_till_first_fqs) + 2 * READ_ONCE(jiffies_till_next_fqs); if (j < HZ / 10 + nr_cpu_ids / RCU_JIFFIES_FQS_DIV) @@ -513,74 +509,6 @@ static const char *gp_state_getname(short gs) } /* - * Show the state of the grace-period kthreads. - */ -void show_rcu_gp_kthreads(void) -{ - int cpu; - unsigned long j; - unsigned long ja; - unsigned long jr; - unsigned long jw; - struct rcu_data *rdp; - struct rcu_node *rnp; - - j = jiffies; - ja = j - READ_ONCE(rcu_state.gp_activity); - jr = j - READ_ONCE(rcu_state.gp_req_activity); - jw = j - READ_ONCE(rcu_state.gp_wake_time); - pr_info("%s: wait state: %s(%d) ->state: %#lx delta ->gp_activity %lu ->gp_req_activity %lu ->gp_wake_time %lu ->gp_wake_seq %ld ->gp_seq %ld ->gp_seq_needed %ld ->gp_flags %#x\n", - rcu_state.name, gp_state_getname(rcu_state.gp_state), - rcu_state.gp_state, - rcu_state.gp_kthread ? rcu_state.gp_kthread->state : 0x1ffffL, - ja, jr, jw, (long)READ_ONCE(rcu_state.gp_wake_seq), - (long)READ_ONCE(rcu_state.gp_seq), - (long)READ_ONCE(rcu_get_root()->gp_seq_needed), - READ_ONCE(rcu_state.gp_flags)); - rcu_for_each_node_breadth_first(rnp) { - if (ULONG_CMP_GE(rcu_state.gp_seq, rnp->gp_seq_needed)) - continue; - pr_info("\trcu_node %d:%d ->gp_seq %ld ->gp_seq_needed %ld\n", - rnp->grplo, rnp->grphi, (long)rnp->gp_seq, - (long)rnp->gp_seq_needed); - if (!rcu_is_leaf_node(rnp)) - continue; - for_each_leaf_node_possible_cpu(rnp, cpu) { - rdp = per_cpu_ptr(&rcu_data, cpu); - if (rdp->gpwrap || - ULONG_CMP_GE(rcu_state.gp_seq, - rdp->gp_seq_needed)) - continue; - pr_info("\tcpu %d ->gp_seq_needed %ld\n", - cpu, (long)rdp->gp_seq_needed); - } - } - /* sched_show_task(rcu_state.gp_kthread); */ -} -EXPORT_SYMBOL_GPL(show_rcu_gp_kthreads); - -/* Dump grace-period-request information due to commandeered sysrq. */ -static void sysrq_show_rcu(int key) -{ - show_rcu_gp_kthreads(); -} - -static struct sysrq_key_op sysrq_rcudump_op = { - .handler = sysrq_show_rcu, - .help_msg = "show-rcu(y)", - .action_msg = "Show RCU tree", - .enable_mask = SYSRQ_ENABLE_DUMP, -}; - -static int __init rcu_sysrq_init(void) -{ - if (sysrq_rcu) - return register_sysrq_key('y', &sysrq_rcudump_op); - return 0; -} -early_initcall(rcu_sysrq_init); - -/* * Send along grace-period-related data for rcutorture diagnostics. */ void rcutorture_get_gp_data(enum rcutorture_type test_type, int *flags, @@ -1034,27 +962,6 @@ static int dyntick_save_progress_counter(struct rcu_data *rdp) } /* - * Handler for the irq_work request posted when a grace period has - * gone on for too long, but not yet long enough for an RCU CPU - * stall warning. Set state appropriately, but just complain if - * there is unexpected state on entry. - */ -static void rcu_iw_handler(struct irq_work *iwp) -{ - struct rcu_data *rdp; - struct rcu_node *rnp; - - rdp = container_of(iwp, struct rcu_data, rcu_iw); - rnp = rdp->mynode; - raw_spin_lock_rcu_node(rnp); - if (!WARN_ON_ONCE(!rdp->rcu_iw_pending)) { - rdp->rcu_iw_gp_seq = rnp->gp_seq; - rdp->rcu_iw_pending = false; - } - raw_spin_unlock_rcu_node(rnp); -} - -/* * Return true if the specified CPU has passed through a quiescent * state by virtue of being in or having passed through an dynticks * idle state since the last call to dyntick_save_progress_counter() @@ -1167,295 +1074,6 @@ static int rcu_implicit_dynticks_qs(struct rcu_data *rdp) return 0; } -static void record_gp_stall_check_time(void) -{ - unsigned long j = jiffies; - unsigned long j1; - - rcu_state.gp_start = j; - j1 = rcu_jiffies_till_stall_check(); - /* Record ->gp_start before ->jiffies_stall. */ - smp_store_release(&rcu_state.jiffies_stall, j + j1); /* ^^^ */ - rcu_state.jiffies_resched = j + j1 / 2; - rcu_state.n_force_qs_gpstart = READ_ONCE(rcu_state.n_force_qs); -} - -/* - * Complain about starvation of grace-period kthread. - */ -static void rcu_check_gp_kthread_starvation(void) -{ - struct task_struct *gpk = rcu_state.gp_kthread; - unsigned long j; - - j = jiffies - READ_ONCE(rcu_state.gp_activity); - if (j > 2 * HZ) { - pr_err("%s kthread starved for %ld jiffies! g%ld f%#x %s(%d) ->state=%#lx ->cpu=%d\n", - rcu_state.name, j, - (long)rcu_seq_current(&rcu_state.gp_seq), - READ_ONCE(rcu_state.gp_flags), - gp_state_getname(rcu_state.gp_state), rcu_state.gp_state, - gpk ? gpk->state : ~0, gpk ? task_cpu(gpk) : -1); - if (gpk) { - pr_err("RCU grace-period kthread stack dump:\n"); - sched_show_task(gpk); - wake_up_process(gpk); - } - } -} - -/* - * Dump stacks of all tasks running on stalled CPUs. First try using - * NMIs, but fall back to manual remote stack tracing on architectures - * that don't support NMI-based stack dumps. The NMI-triggered stack - * traces are more accurate because they are printed by the target CPU. - */ -static void rcu_dump_cpu_stacks(void) -{ - int cpu; - unsigned long flags; - struct rcu_node *rnp; - - rcu_for_each_leaf_node(rnp) { - raw_spin_lock_irqsave_rcu_node(rnp, flags); - for_each_leaf_node_possible_cpu(rnp, cpu) - if (rnp->qsmask & leaf_node_cpu_bit(rnp, cpu)) - if (!trigger_single_cpu_backtrace(cpu)) - dump_cpu_task(cpu); - raw_spin_unlock_irqrestore_rcu_node(rnp, flags); - } -} - -/* - * If too much time has passed in the current grace period, and if - * so configured, go kick the relevant kthreads. - */ -static void rcu_stall_kick_kthreads(void) -{ - unsigned long j; - - if (!rcu_kick_kthreads) - return; - j = READ_ONCE(rcu_state.jiffies_kick_kthreads); - if (time_after(jiffies, j) && rcu_state.gp_kthread && - (rcu_gp_in_progress() || READ_ONCE(rcu_state.gp_flags))) { - WARN_ONCE(1, "Kicking %s grace-period kthread\n", - rcu_state.name); - rcu_ftrace_dump(DUMP_ALL); - wake_up_process(rcu_state.gp_kthread); - WRITE_ONCE(rcu_state.jiffies_kick_kthreads, j + HZ); - } -} - -static void panic_on_rcu_stall(void) -{ - if (sysctl_panic_on_rcu_stall) - panic("RCU Stall\n"); -} - -static void print_other_cpu_stall(unsigned long gp_seq) -{ - int cpu; - unsigned long flags; - unsigned long gpa; - unsigned long j; - int ndetected = 0; - struct rcu_node *rnp = rcu_get_root(); - long totqlen = 0; - - /* Kick and suppress, if so configured. */ - rcu_stall_kick_kthreads(); - if (rcu_cpu_stall_suppress) - return; - - /* - * OK, time to rat on our buddy... - * See Documentation/RCU/stallwarn.txt for info on how to debug - * RCU CPU stall warnings. - */ - pr_err("INFO: %s detected stalls on CPUs/tasks:", rcu_state.name); - print_cpu_stall_info_begin(); - rcu_for_each_leaf_node(rnp) { - raw_spin_lock_irqsave_rcu_node(rnp, flags); - ndetected += rcu_print_task_stall(rnp); - if (rnp->qsmask != 0) { - for_each_leaf_node_possible_cpu(rnp, cpu) - if (rnp->qsmask & leaf_node_cpu_bit(rnp, cpu)) { - print_cpu_stall_info(cpu); - ndetected++; - } - } - raw_spin_unlock_irqrestore_rcu_node(rnp, flags); - } - - print_cpu_stall_info_end(); - for_each_possible_cpu(cpu) - totqlen += rcu_get_n_cbs_cpu(cpu); - pr_cont("(detected by %d, t=%ld jiffies, g=%ld, q=%lu)\n", - smp_processor_id(), (long)(jiffies - rcu_state.gp_start), - (long)rcu_seq_current(&rcu_state.gp_seq), totqlen); - if (ndetected) { - rcu_dump_cpu_stacks(); - - /* Complain about tasks blocking the grace period. */ - rcu_print_detail_task_stall(); - } else { - if (rcu_seq_current(&rcu_state.gp_seq) != gp_seq) { - pr_err("INFO: Stall ended before state dump start\n"); - } else { - j = jiffies; - gpa = READ_ONCE(rcu_state.gp_activity); - pr_err("All QSes seen, last %s kthread activity %ld (%ld-%ld), jiffies_till_next_fqs=%ld, root ->qsmask %#lx\n", - rcu_state.name, j - gpa, j, gpa, - READ_ONCE(jiffies_till_next_fqs), - rcu_get_root()->qsmask); - /* In this case, the current CPU might be at fault. */ - sched_show_task(current); - } - } - /* Rewrite if needed in case of slow consoles. */ - if (ULONG_CMP_GE(jiffies, READ_ONCE(rcu_state.jiffies_stall))) - WRITE_ONCE(rcu_state.jiffies_stall, - jiffies + 3 * rcu_jiffies_till_stall_check() + 3); - - rcu_check_gp_kthread_starvation(); - - panic_on_rcu_stall(); - - rcu_force_quiescent_state(); /* Kick them all. */ -} - -static void print_cpu_stall(void) -{ - int cpu; - unsigned long flags; - struct rcu_data *rdp = this_cpu_ptr(&rcu_data); - struct rcu_node *rnp = rcu_get_root(); - long totqlen = 0; - - /* Kick and suppress, if so configured. */ - rcu_stall_kick_kthreads(); - if (rcu_cpu_stall_suppress) - return; - - /* - * OK, time to rat on ourselves... - * See Documentation/RCU/stallwarn.txt for info on how to debug - * RCU CPU stall warnings. - */ - pr_err("INFO: %s self-detected stall on CPU", rcu_state.name); - print_cpu_stall_info_begin(); - raw_spin_lock_irqsave_rcu_node(rdp->mynode, flags); - print_cpu_stall_info(smp_processor_id()); - raw_spin_unlock_irqrestore_rcu_node(rdp->mynode, flags); - print_cpu_stall_info_end(); - for_each_possible_cpu(cpu) - totqlen += rcu_get_n_cbs_cpu(cpu); - pr_cont(" (t=%lu jiffies g=%ld q=%lu)\n", - jiffies - rcu_state.gp_start, - (long)rcu_seq_current(&rcu_state.gp_seq), totqlen); - - rcu_check_gp_kthread_starvation(); - - rcu_dump_cpu_stacks(); - - raw_spin_lock_irqsave_rcu_node(rnp, flags); - /* Rewrite if needed in case of slow consoles. */ - if (ULONG_CMP_GE(jiffies, READ_ONCE(rcu_state.jiffies_stall))) - WRITE_ONCE(rcu_state.jiffies_stall, - jiffies + 3 * rcu_jiffies_till_stall_check() + 3); - raw_spin_unlock_irqrestore_rcu_node(rnp, flags); - - panic_on_rcu_stall(); - - /* - * Attempt to revive the RCU machinery by forcing a context switch. - * - * A context switch would normally allow the RCU state machine to make - * progress and it could be we're stuck in kernel space without context - * switches for an entirely unreasonable amount of time. - */ - set_tsk_need_resched(current); - set_preempt_need_resched(); -} - -static void check_cpu_stall(struct rcu_data *rdp) -{ - unsigned long gs1; - unsigned long gs2; - unsigned long gps; - unsigned long j; - unsigned long jn; - unsigned long js; - struct rcu_node *rnp; - - if ((rcu_cpu_stall_suppress && !rcu_kick_kthreads) || - !rcu_gp_in_progress()) - return; - rcu_stall_kick_kthreads(); - j = jiffies; - - /* - * Lots of memory barriers to reject false positives. - * - * The idea is to pick up rcu_state.gp_seq, then - * rcu_state.jiffies_stall, then rcu_state.gp_start, and finally - * another copy of rcu_state.gp_seq. These values are updated in - * the opposite order with memory barriers (or equivalent) during - * grace-period initialization and cleanup. Now, a false positive - * can occur if we get an new value of rcu_state.gp_start and a old - * value of rcu_state.jiffies_stall. But given the memory barriers, - * the only way that this can happen is if one grace period ends - * and another starts between these two fetches. This is detected - * by comparing the second fetch of rcu_state.gp_seq with the - * previous fetch from rcu_state.gp_seq. - * - * Given this check, comparisons of jiffies, rcu_state.jiffies_stall, - * and rcu_state.gp_start suffice to forestall false positives. - */ - gs1 = READ_ONCE(rcu_state.gp_seq); - smp_rmb(); /* Pick up ->gp_seq first... */ - js = READ_ONCE(rcu_state.jiffies_stall); - smp_rmb(); /* ...then ->jiffies_stall before the rest... */ - gps = READ_ONCE(rcu_state.gp_start); - smp_rmb(); /* ...and finally ->gp_start before ->gp_seq again. */ - gs2 = READ_ONCE(rcu_state.gp_seq); - if (gs1 != gs2 || - ULONG_CMP_LT(j, js) || - ULONG_CMP_GE(gps, js)) - return; /* No stall or GP completed since entering function. */ - rnp = rdp->mynode; - jn = jiffies + 3 * rcu_jiffies_till_stall_check() + 3; - if (rcu_gp_in_progress() && - (READ_ONCE(rnp->qsmask) & rdp->grpmask) && - cmpxchg(&rcu_state.jiffies_stall, js, jn) == js) { - - /* We haven't checked in, so go dump stack. */ - print_cpu_stall(); - - } else if (rcu_gp_in_progress() && - ULONG_CMP_GE(j, js + RCU_STALL_RAT_DELAY) && - cmpxchg(&rcu_state.jiffies_stall, js, jn) == js) { - - /* They had a few time units to dump stack, so complain. */ - print_other_cpu_stall(gs2); - } -} - -/** - * rcu_cpu_stall_reset - prevent further stall warnings in current grace period - * - * Set the stall-warning timeout way off into the future, thus preventing - * any RCU CPU stall-warning messages from appearing in the current set of - * RCU grace periods. - * - * The caller must disable hard irqs. - */ -void rcu_cpu_stall_reset(void) -{ - WRITE_ONCE(rcu_state.jiffies_stall, jiffies + ULONG_MAX / 2); -} - /* Trace-event wrapper function for trace_rcu_future_grace_period. */ static void trace_rcu_this_gp(struct rcu_node *rnp, struct rcu_data *rdp, unsigned long gp_seq_req, const char *s) @@ -1585,7 +1203,7 @@ static bool rcu_future_gp_cleanup(struct rcu_node *rnp) static void rcu_gp_kthread_wake(void) { if ((current == rcu_state.gp_kthread && - !in_interrupt() && !in_serving_softirq()) || + !in_irq() && !in_serving_softirq()) || !READ_ONCE(rcu_state.gp_flags) || !rcu_state.gp_kthread) return; @@ -2295,11 +1913,10 @@ rcu_report_qs_rdp(int cpu, struct rcu_data *rdp) return; } mask = rdp->grpmask; + rdp->core_needs_qs = false; if ((rnp->qsmask & mask) == 0) { raw_spin_unlock_irqrestore_rcu_node(rnp, flags); } else { - rdp->core_needs_qs = false; - /* * This GP can't end until cpu checks in, so all of our * callbacks can be processed during the next GP. @@ -2548,11 +2165,11 @@ void rcu_sched_clock_irq(int user) } /* - * Scan the leaf rcu_node structures, processing dyntick state for any that - * have not yet encountered a quiescent state, using the function specified. - * Also initiate boosting for any threads blocked on the root rcu_node. - * - * The caller must have suppressed start of new grace periods. + * Scan the leaf rcu_node structures. For each structure on which all + * CPUs have reported a quiescent state and on which there are tasks + * blocking the current grace period, initiate RCU priority boosting. + * Otherwise, invoke the specified function to check dyntick state for + * each CPU that has not yet reported a quiescent state. */ static void force_qs_rnp(int (*f)(struct rcu_data *rdp)) { @@ -2635,101 +2252,6 @@ void rcu_force_quiescent_state(void) } EXPORT_SYMBOL_GPL(rcu_force_quiescent_state); -/* - * This function checks for grace-period requests that fail to motivate - * RCU to come out of its idle mode. - */ -void -rcu_check_gp_start_stall(struct rcu_node *rnp, struct rcu_data *rdp, - const unsigned long gpssdelay) -{ - unsigned long flags; - unsigned long j; - struct rcu_node *rnp_root = rcu_get_root(); - static atomic_t warned = ATOMIC_INIT(0); - - if (!IS_ENABLED(CONFIG_PROVE_RCU) || rcu_gp_in_progress() || - ULONG_CMP_GE(rnp_root->gp_seq, rnp_root->gp_seq_needed)) - return; - j = jiffies; /* Expensive access, and in common case don't get here. */ - if (time_before(j, READ_ONCE(rcu_state.gp_req_activity) + gpssdelay) || - time_before(j, READ_ONCE(rcu_state.gp_activity) + gpssdelay) || - atomic_read(&warned)) - return; - - raw_spin_lock_irqsave_rcu_node(rnp, flags); - j = jiffies; - if (rcu_gp_in_progress() || - ULONG_CMP_GE(rnp_root->gp_seq, rnp_root->gp_seq_needed) || - time_before(j, READ_ONCE(rcu_state.gp_req_activity) + gpssdelay) || - time_before(j, READ_ONCE(rcu_state.gp_activity) + gpssdelay) || - atomic_read(&warned)) { - raw_spin_unlock_irqrestore_rcu_node(rnp, flags); - return; - } - /* Hold onto the leaf lock to make others see warned==1. */ - - if (rnp_root != rnp) - raw_spin_lock_rcu_node(rnp_root); /* irqs already disabled. */ - j = jiffies; - if (rcu_gp_in_progress() || - ULONG_CMP_GE(rnp_root->gp_seq, rnp_root->gp_seq_needed) || - time_before(j, rcu_state.gp_req_activity + gpssdelay) || - time_before(j, rcu_state.gp_activity + gpssdelay) || - atomic_xchg(&warned, 1)) { - raw_spin_unlock_rcu_node(rnp_root); /* irqs remain disabled. */ - raw_spin_unlock_irqrestore_rcu_node(rnp, flags); - return; - } - WARN_ON(1); - if (rnp_root != rnp) - raw_spin_unlock_rcu_node(rnp_root); - raw_spin_unlock_irqrestore_rcu_node(rnp, flags); - show_rcu_gp_kthreads(); -} - -/* - * Do a forward-progress check for rcutorture. This is normally invoked - * due to an OOM event. The argument "j" gives the time period during - * which rcutorture would like progress to have been made. - */ -void rcu_fwd_progress_check(unsigned long j) -{ - unsigned long cbs; - int cpu; - unsigned long max_cbs = 0; - int max_cpu = -1; - struct rcu_data *rdp; - - if (rcu_gp_in_progress()) { - pr_info("%s: GP age %lu jiffies\n", - __func__, jiffies - rcu_state.gp_start); - show_rcu_gp_kthreads(); - } else { - pr_info("%s: Last GP end %lu jiffies ago\n", - __func__, jiffies - rcu_state.gp_end); - preempt_disable(); - rdp = this_cpu_ptr(&rcu_data); - rcu_check_gp_start_stall(rdp->mynode, rdp, j); - preempt_enable(); - } - for_each_possible_cpu(cpu) { - cbs = rcu_get_n_cbs_cpu(cpu); - if (!cbs) - continue; - if (max_cpu < 0) - pr_info("%s: callbacks", __func__); - pr_cont(" %d: %lu", cpu, cbs); - if (cbs <= max_cbs) - continue; - max_cbs = cbs; - max_cpu = cpu; - } - if (max_cpu >= 0) - pr_cont("\n"); -} -EXPORT_SYMBOL_GPL(rcu_fwd_progress_check); - /* Perform RCU core processing work for the current CPU. */ static __latent_entropy void rcu_core(struct softirq_action *unused) { @@ -3559,13 +3081,11 @@ static int rcu_pm_notify(struct notifier_block *self, switch (action) { case PM_HIBERNATION_PREPARE: case PM_SUSPEND_PREPARE: - if (nr_cpu_ids <= 256) /* Expediting bad for large systems. */ - rcu_expedite_gp(); + rcu_expedite_gp(); break; case PM_POST_HIBERNATION: case PM_POST_SUSPEND: - if (nr_cpu_ids <= 256) /* Expediting bad for large systems. */ - rcu_unexpedite_gp(); + rcu_unexpedite_gp(); break; default: break; @@ -3742,8 +3262,7 @@ static void __init rcu_init_geometry(void) jiffies_till_first_fqs = d; if (jiffies_till_next_fqs == ULONG_MAX) jiffies_till_next_fqs = d; - if (jiffies_till_sched_qs == ULONG_MAX) - adjust_jiffies_till_sched_qs(); + adjust_jiffies_till_sched_qs(); /* If the compile-time values are accurate, just leave. */ if (rcu_fanout_leaf == RCU_FANOUT_LEAF && @@ -3858,5 +3377,6 @@ void __init rcu_init(void) srcu_init(); } +#include "tree_stall.h" #include "tree_exp.h" #include "tree_plugin.h" diff --git a/kernel/rcu/tree.h b/kernel/rcu/tree.h index bb4f995f2d3f..e253d11af3c4 100644 --- a/kernel/rcu/tree.h +++ b/kernel/rcu/tree.h @@ -393,15 +393,13 @@ static const char *tp_rcu_varname __used __tracepoint_string = rcu_name; int rcu_dynticks_snap(struct rcu_data *rdp); -/* Forward declarations for rcutree_plugin.h */ +/* Forward declarations for tree_plugin.h */ static void rcu_bootup_announce(void); static void rcu_qs(void); static int rcu_preempt_blocked_readers_cgp(struct rcu_node *rnp); #ifdef CONFIG_HOTPLUG_CPU static bool rcu_preempt_has_tasks(struct rcu_node *rnp); #endif /* #ifdef CONFIG_HOTPLUG_CPU */ -static void rcu_print_detail_task_stall(void); -static int rcu_print_task_stall(struct rcu_node *rnp); static int rcu_print_task_exp_stall(struct rcu_node *rnp); static void rcu_preempt_check_blocked_tasks(struct rcu_node *rnp); static void rcu_flavor_sched_clock_irq(int user); @@ -418,9 +416,6 @@ static void rcu_prepare_for_idle(void); static bool rcu_preempt_has_tasks(struct rcu_node *rnp); static bool rcu_preempt_need_deferred_qs(struct task_struct *t); static void rcu_preempt_deferred_qs(struct task_struct *t); -static void print_cpu_stall_info_begin(void); -static void print_cpu_stall_info(int cpu); -static void print_cpu_stall_info_end(void); static void zero_cpu_stall_ticks(struct rcu_data *rdp); static bool rcu_nocb_cpu_needs_barrier(int cpu); static struct swait_queue_head *rcu_nocb_gp_get(struct rcu_node *rnp); @@ -445,3 +440,10 @@ static void rcu_bind_gp_kthread(void); static bool rcu_nohz_full_cpu(void); static void rcu_dynticks_task_enter(void); static void rcu_dynticks_task_exit(void); + +/* Forward declarations for tree_stall.h */ +static void record_gp_stall_check_time(void); +static void rcu_iw_handler(struct irq_work *iwp); +static void check_cpu_stall(struct rcu_data *rdp); +static void rcu_check_gp_start_stall(struct rcu_node *rnp, struct rcu_data *rdp, + const unsigned long gpssdelay); diff --git a/kernel/rcu/tree_exp.h b/kernel/rcu/tree_exp.h index 4c2a0189e748..9c990df880d1 100644 --- a/kernel/rcu/tree_exp.h +++ b/kernel/rcu/tree_exp.h @@ -10,6 +10,7 @@ #include <linux/lockdep.h> static void rcu_exp_handler(void *unused); +static int rcu_print_task_exp_stall(struct rcu_node *rnp); /* * Record the start of an expedited grace period. @@ -633,7 +634,7 @@ static void rcu_exp_handler(void *unused) raw_spin_lock_irqsave_rcu_node(rnp, flags); if (rnp->expmask & rdp->grpmask) { rdp->deferred_qs = true; - WRITE_ONCE(t->rcu_read_unlock_special.b.exp_hint, true); + t->rcu_read_unlock_special.b.exp_hint = true; } raw_spin_unlock_irqrestore_rcu_node(rnp, flags); return; @@ -648,7 +649,7 @@ static void rcu_exp_handler(void *unused) * * If the CPU is fully enabled (or if some buggy RCU-preempt * read-side critical section is being used from idle), just - * invoke rcu_preempt_defer_qs() to immediately report the + * invoke rcu_preempt_deferred_qs() to immediately report the * quiescent state. We cannot use rcu_read_unlock_special() * because we are in an interrupt handler, which will cause that * function to take an early exit without doing anything. @@ -670,6 +671,27 @@ static void sync_sched_exp_online_cleanup(int cpu) { } +/* + * Scan the current list of tasks blocked within RCU read-side critical + * sections, printing out the tid of each that is blocking the current + * expedited grace period. + */ +static int rcu_print_task_exp_stall(struct rcu_node *rnp) +{ + struct task_struct *t; + int ndetected = 0; + + if (!rnp->exp_tasks) + return 0; + t = list_entry(rnp->exp_tasks->prev, + struct task_struct, rcu_node_entry); + list_for_each_entry_continue(t, &rnp->blkd_tasks, rcu_node_entry) { + pr_cont(" P%d", t->pid); + ndetected++; + } + return ndetected; +} + #else /* #ifdef CONFIG_PREEMPT_RCU */ /* Invoked on each online non-idle CPU for expedited quiescent state. */ @@ -709,6 +731,16 @@ static void sync_sched_exp_online_cleanup(int cpu) WARN_ON_ONCE(ret); } +/* + * Because preemptible RCU does not exist, we never have to check for + * tasks blocked within RCU read-side critical sections that are + * blocking the current expedited grace period. + */ +static int rcu_print_task_exp_stall(struct rcu_node *rnp) +{ + return 0; +} + #endif /* #else #ifdef CONFIG_PREEMPT_RCU */ /** diff --git a/kernel/rcu/tree_plugin.h b/kernel/rcu/tree_plugin.h index 97dba50f6fb2..1102765f91fd 100644 --- a/kernel/rcu/tree_plugin.h +++ b/kernel/rcu/tree_plugin.h @@ -285,7 +285,7 @@ static void rcu_qs(void) TPS("cpuqs")); __this_cpu_write(rcu_data.cpu_no_qs.b.norm, false); barrier(); /* Coordinate with rcu_flavor_sched_clock_irq(). */ - current->rcu_read_unlock_special.b.need_qs = false; + WRITE_ONCE(current->rcu_read_unlock_special.b.need_qs, false); } } @@ -643,100 +643,6 @@ static void rcu_read_unlock_special(struct task_struct *t) } /* - * Dump detailed information for all tasks blocking the current RCU - * grace period on the specified rcu_node structure. - */ -static void rcu_print_detail_task_stall_rnp(struct rcu_node *rnp) -{ - unsigned long flags; - struct task_struct *t; - - raw_spin_lock_irqsave_rcu_node(rnp, flags); - if (!rcu_preempt_blocked_readers_cgp(rnp)) { - raw_spin_unlock_irqrestore_rcu_node(rnp, flags); - return; - } - t = list_entry(rnp->gp_tasks->prev, - struct task_struct, rcu_node_entry); - list_for_each_entry_continue(t, &rnp->blkd_tasks, rcu_node_entry) { - /* - * We could be printing a lot while holding a spinlock. - * Avoid triggering hard lockup. - */ - touch_nmi_watchdog(); - sched_show_task(t); - } - raw_spin_unlock_irqrestore_rcu_node(rnp, flags); -} - -/* - * Dump detailed information for all tasks blocking the current RCU - * grace period. - */ -static void rcu_print_detail_task_stall(void) -{ - struct rcu_node *rnp = rcu_get_root(); - - rcu_print_detail_task_stall_rnp(rnp); - rcu_for_each_leaf_node(rnp) - rcu_print_detail_task_stall_rnp(rnp); -} - -static void rcu_print_task_stall_begin(struct rcu_node *rnp) -{ - pr_err("\tTasks blocked on level-%d rcu_node (CPUs %d-%d):", - rnp->level, rnp->grplo, rnp->grphi); -} - -static void rcu_print_task_stall_end(void) -{ - pr_cont("\n"); -} - -/* - * Scan the current list of tasks blocked within RCU read-side critical - * sections, printing out the tid of each. - */ -static int rcu_print_task_stall(struct rcu_node *rnp) -{ - struct task_struct *t; - int ndetected = 0; - - if (!rcu_preempt_blocked_readers_cgp(rnp)) - return 0; - rcu_print_task_stall_begin(rnp); - t = list_entry(rnp->gp_tasks->prev, - struct task_struct, rcu_node_entry); - list_for_each_entry_continue(t, &rnp->blkd_tasks, rcu_node_entry) { - pr_cont(" P%d", t->pid); - ndetected++; - } - rcu_print_task_stall_end(); - return ndetected; -} - -/* - * Scan the current list of tasks blocked within RCU read-side critical - * sections, printing out the tid of each that is blocking the current - * expedited grace period. - */ -static int rcu_print_task_exp_stall(struct rcu_node *rnp) -{ - struct task_struct *t; - int ndetected = 0; - - if (!rnp->exp_tasks) - return 0; - t = list_entry(rnp->exp_tasks->prev, - struct task_struct, rcu_node_entry); - list_for_each_entry_continue(t, &rnp->blkd_tasks, rcu_node_entry) { - pr_cont(" P%d", t->pid); - ndetected++; - } - return ndetected; -} - -/* * Check that the list of blocked tasks for the newly completed grace * period is in fact empty. It is a serious bug to complete a grace * period that still has RCU readers blocked! This function must be @@ -804,19 +710,25 @@ static void rcu_flavor_sched_clock_irq(int user) /* * Check for a task exiting while in a preemptible-RCU read-side - * critical section, clean up if so. No need to issue warnings, - * as debug_check_no_locks_held() already does this if lockdep - * is enabled. + * critical section, clean up if so. No need to issue warnings, as + * debug_check_no_locks_held() already does this if lockdep is enabled. + * Besides, if this function does anything other than just immediately + * return, there was a bug of some sort. Spewing warnings from this + * function is like as not to simply obscure important prior warnings. */ void exit_rcu(void) { struct task_struct *t = current; - if (likely(list_empty(¤t->rcu_node_entry))) + if (unlikely(!list_empty(¤t->rcu_node_entry))) { + t->rcu_read_lock_nesting = 1; + barrier(); + WRITE_ONCE(t->rcu_read_unlock_special.b.blocked, true); + } else if (unlikely(t->rcu_read_lock_nesting)) { + t->rcu_read_lock_nesting = 1; + } else { return; - t->rcu_read_lock_nesting = 1; - barrier(); - t->rcu_read_unlock_special.b.blocked = true; + } __rcu_read_unlock(); rcu_preempt_deferred_qs(current); } @@ -980,33 +892,6 @@ static bool rcu_preempt_need_deferred_qs(struct task_struct *t) static void rcu_preempt_deferred_qs(struct task_struct *t) { } /* - * Because preemptible RCU does not exist, we never have to check for - * tasks blocked within RCU read-side critical sections. - */ -static void rcu_print_detail_task_stall(void) -{ -} - -/* - * Because preemptible RCU does not exist, we never have to check for - * tasks blocked within RCU read-side critical sections. - */ -static int rcu_print_task_stall(struct rcu_node *rnp) -{ - return 0; -} - -/* - * Because preemptible RCU does not exist, we never have to check for - * tasks blocked within RCU read-side critical sections that are - * blocking the current expedited grace period. - */ -static int rcu_print_task_exp_stall(struct rcu_node *rnp) -{ - return 0; -} - -/* * Because there is no preemptible RCU, there can be no readers blocked, * so there is no need to check for blocked tasks. So check only for * bogus qsmask values. @@ -1185,8 +1070,6 @@ static int rcu_boost_kthread(void *arg) static void rcu_initiate_boost(struct rcu_node *rnp, unsigned long flags) __releases(rnp->lock) { - struct task_struct *t; - raw_lockdep_assert_held_rcu_node(rnp); if (!rcu_preempt_blocked_readers_cgp(rnp) && rnp->exp_tasks == NULL) { raw_spin_unlock_irqrestore_rcu_node(rnp, flags); @@ -1200,9 +1083,8 @@ static void rcu_initiate_boost(struct rcu_node *rnp, unsigned long flags) if (rnp->exp_tasks == NULL) rnp->boost_tasks = rnp->gp_tasks; raw_spin_unlock_irqrestore_rcu_node(rnp, flags); - t = rnp->boost_kthread_task; - if (t) - rcu_wake_cond(t, rnp->boost_kthread_status); + rcu_wake_cond(rnp->boost_kthread_task, + rnp->boost_kthread_status); } else { raw_spin_unlock_irqrestore_rcu_node(rnp, flags); } @@ -1649,98 +1531,6 @@ static void rcu_cleanup_after_idle(void) #endif /* #else #if !defined(CONFIG_RCU_FAST_NO_HZ) */ -#ifdef CONFIG_RCU_FAST_NO_HZ - -static void print_cpu_stall_fast_no_hz(char *cp, int cpu) -{ - struct rcu_data *rdp = &per_cpu(rcu_data, cpu); - - sprintf(cp, "last_accelerate: %04lx/%04lx, Nonlazy posted: %c%c%c", - rdp->last_accelerate & 0xffff, jiffies & 0xffff, - ".l"[rdp->all_lazy], - ".L"[!rcu_segcblist_n_nonlazy_cbs(&rdp->cblist)], - ".D"[!rdp->tick_nohz_enabled_snap]); -} - -#else /* #ifdef CONFIG_RCU_FAST_NO_HZ */ - -static void print_cpu_stall_fast_no_hz(char *cp, int cpu) -{ - *cp = '\0'; -} - -#endif /* #else #ifdef CONFIG_RCU_FAST_NO_HZ */ - -/* Initiate the stall-info list. */ -static void print_cpu_stall_info_begin(void) -{ - pr_cont("\n"); -} - -/* - * Print out diagnostic information for the specified stalled CPU. - * - * If the specified CPU is aware of the current RCU grace period, then - * print the number of scheduling clock interrupts the CPU has taken - * during the time that it has been aware. Otherwise, print the number - * of RCU grace periods that this CPU is ignorant of, for example, "1" - * if the CPU was aware of the previous grace period. - * - * Also print out idle and (if CONFIG_RCU_FAST_NO_HZ) idle-entry info. - */ -static void print_cpu_stall_info(int cpu) -{ - unsigned long delta; - char fast_no_hz[72]; - struct rcu_data *rdp = per_cpu_ptr(&rcu_data, cpu); - char *ticks_title; - unsigned long ticks_value; - - /* - * We could be printing a lot while holding a spinlock. Avoid - * triggering hard lockup. - */ - touch_nmi_watchdog(); - - ticks_value = rcu_seq_ctr(rcu_state.gp_seq - rdp->gp_seq); - if (ticks_value) { - ticks_title = "GPs behind"; - } else { - ticks_title = "ticks this GP"; - ticks_value = rdp->ticks_this_gp; - } - print_cpu_stall_fast_no_hz(fast_no_hz, cpu); - delta = rcu_seq_ctr(rdp->mynode->gp_seq - rdp->rcu_iw_gp_seq); - pr_err("\t%d-%c%c%c%c: (%lu %s) idle=%03x/%ld/%#lx softirq=%u/%u fqs=%ld %s\n", - cpu, - "O."[!!cpu_online(cpu)], - "o."[!!(rdp->grpmask & rdp->mynode->qsmaskinit)], - "N."[!!(rdp->grpmask & rdp->mynode->qsmaskinitnext)], - !IS_ENABLED(CONFIG_IRQ_WORK) ? '?' : - rdp->rcu_iw_pending ? (int)min(delta, 9UL) + '0' : - "!."[!delta], - ticks_value, ticks_title, - rcu_dynticks_snap(rdp) & 0xfff, - rdp->dynticks_nesting, rdp->dynticks_nmi_nesting, - rdp->softirq_snap, kstat_softirqs_cpu(RCU_SOFTIRQ, cpu), - READ_ONCE(rcu_state.n_force_qs) - rcu_state.n_force_qs_gpstart, - fast_no_hz); -} - -/* Terminate the stall-info list. */ -static void print_cpu_stall_info_end(void) -{ - pr_err("\t"); -} - -/* Zero ->ticks_this_gp and snapshot the number of RCU softirq handlers. */ -static void zero_cpu_stall_ticks(struct rcu_data *rdp) -{ - rdp->ticks_this_gp = 0; - rdp->softirq_snap = kstat_softirqs_cpu(RCU_SOFTIRQ, smp_processor_id()); - WRITE_ONCE(rdp->last_fqs_resched, jiffies); -} - #ifdef CONFIG_RCU_NOCB_CPU /* @@ -1766,11 +1556,22 @@ static void zero_cpu_stall_ticks(struct rcu_data *rdp) */ -/* Parse the boot-time rcu_nocb_mask CPU list from the kernel parameters. */ +/* + * Parse the boot-time rcu_nocb_mask CPU list from the kernel parameters. + * The string after the "rcu_nocbs=" is either "all" for all CPUs, or a + * comma-separated list of CPUs and/or CPU ranges. If an invalid list is + * given, a warning is emitted and all CPUs are offloaded. + */ static int __init rcu_nocb_setup(char *str) { alloc_bootmem_cpumask_var(&rcu_nocb_mask); - cpulist_parse(str, rcu_nocb_mask); + if (!strcasecmp(str, "all")) + cpumask_setall(rcu_nocb_mask); + else + if (cpulist_parse(str, rcu_nocb_mask)) { + pr_warn("rcu_nocbs= bad CPU range, all CPUs set\n"); + cpumask_setall(rcu_nocb_mask); + } return 1; } __setup("rcu_nocbs=", rcu_nocb_setup); diff --git a/kernel/rcu/tree_stall.h b/kernel/rcu/tree_stall.h new file mode 100644 index 000000000000..f65a73a97323 --- /dev/null +++ b/kernel/rcu/tree_stall.h @@ -0,0 +1,709 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * RCU CPU stall warnings for normal RCU grace periods + * + * Copyright IBM Corporation, 2019 + * + * Author: Paul E. McKenney <paulmck@linux.ibm.com> + */ + +////////////////////////////////////////////////////////////////////////////// +// +// Controlling CPU stall warnings, including delay calculation. + +/* panic() on RCU Stall sysctl. */ +int sysctl_panic_on_rcu_stall __read_mostly; + +#ifdef CONFIG_PROVE_RCU +#define RCU_STALL_DELAY_DELTA (5 * HZ) +#else +#define RCU_STALL_DELAY_DELTA 0 +#endif + +/* Limit-check stall timeouts specified at boottime and runtime. */ +int rcu_jiffies_till_stall_check(void) +{ + int till_stall_check = READ_ONCE(rcu_cpu_stall_timeout); + + /* + * Limit check must be consistent with the Kconfig limits + * for CONFIG_RCU_CPU_STALL_TIMEOUT. + */ + if (till_stall_check < 3) { + WRITE_ONCE(rcu_cpu_stall_timeout, 3); + till_stall_check = 3; + } else if (till_stall_check > 300) { + WRITE_ONCE(rcu_cpu_stall_timeout, 300); + till_stall_check = 300; + } + return till_stall_check * HZ + RCU_STALL_DELAY_DELTA; +} +EXPORT_SYMBOL_GPL(rcu_jiffies_till_stall_check); + +/* Don't do RCU CPU stall warnings during long sysrq printouts. */ +void rcu_sysrq_start(void) +{ + if (!rcu_cpu_stall_suppress) + rcu_cpu_stall_suppress = 2; +} + +void rcu_sysrq_end(void) +{ + if (rcu_cpu_stall_suppress == 2) + rcu_cpu_stall_suppress = 0; +} + +/* Don't print RCU CPU stall warnings during a kernel panic. */ +static int rcu_panic(struct notifier_block *this, unsigned long ev, void *ptr) +{ + rcu_cpu_stall_suppress = 1; + return NOTIFY_DONE; +} + +static struct notifier_block rcu_panic_block = { + .notifier_call = rcu_panic, +}; + +static int __init check_cpu_stall_init(void) +{ + atomic_notifier_chain_register(&panic_notifier_list, &rcu_panic_block); + return 0; +} +early_initcall(check_cpu_stall_init); + +/* If so specified via sysctl, panic, yielding cleaner stall-warning output. */ +static void panic_on_rcu_stall(void) +{ + if (sysctl_panic_on_rcu_stall) + panic("RCU Stall\n"); +} + +/** + * rcu_cpu_stall_reset - prevent further stall warnings in current grace period + * + * Set the stall-warning timeout way off into the future, thus preventing + * any RCU CPU stall-warning messages from appearing in the current set of + * RCU grace periods. + * + * The caller must disable hard irqs. + */ +void rcu_cpu_stall_reset(void) +{ + WRITE_ONCE(rcu_state.jiffies_stall, jiffies + ULONG_MAX / 2); +} + +////////////////////////////////////////////////////////////////////////////// +// +// Interaction with RCU grace periods + +/* Start of new grace period, so record stall time (and forcing times). */ +static void record_gp_stall_check_time(void) +{ + unsigned long j = jiffies; + unsigned long j1; + + rcu_state.gp_start = j; + j1 = rcu_jiffies_till_stall_check(); + /* Record ->gp_start before ->jiffies_stall. */ + smp_store_release(&rcu_state.jiffies_stall, j + j1); /* ^^^ */ + rcu_state.jiffies_resched = j + j1 / 2; + rcu_state.n_force_qs_gpstart = READ_ONCE(rcu_state.n_force_qs); +} + +/* Zero ->ticks_this_gp and snapshot the number of RCU softirq handlers. */ +static void zero_cpu_stall_ticks(struct rcu_data *rdp) +{ + rdp->ticks_this_gp = 0; + rdp->softirq_snap = kstat_softirqs_cpu(RCU_SOFTIRQ, smp_processor_id()); + WRITE_ONCE(rdp->last_fqs_resched, jiffies); +} + +/* + * If too much time has passed in the current grace period, and if + * so configured, go kick the relevant kthreads. + */ +static void rcu_stall_kick_kthreads(void) +{ + unsigned long j; + + if (!rcu_kick_kthreads) + return; + j = READ_ONCE(rcu_state.jiffies_kick_kthreads); + if (time_after(jiffies, j) && rcu_state.gp_kthread && + (rcu_gp_in_progress() || READ_ONCE(rcu_state.gp_flags))) { + WARN_ONCE(1, "Kicking %s grace-period kthread\n", + rcu_state.name); + rcu_ftrace_dump(DUMP_ALL); + wake_up_process(rcu_state.gp_kthread); + WRITE_ONCE(rcu_state.jiffies_kick_kthreads, j + HZ); + } +} + +/* + * Handler for the irq_work request posted about halfway into the RCU CPU + * stall timeout, and used to detect excessive irq disabling. Set state + * appropriately, but just complain if there is unexpected state on entry. + */ +static void rcu_iw_handler(struct irq_work *iwp) +{ + struct rcu_data *rdp; + struct rcu_node *rnp; + + rdp = container_of(iwp, struct rcu_data, rcu_iw); + rnp = rdp->mynode; + raw_spin_lock_rcu_node(rnp); + if (!WARN_ON_ONCE(!rdp->rcu_iw_pending)) { + rdp->rcu_iw_gp_seq = rnp->gp_seq; + rdp->rcu_iw_pending = false; + } + raw_spin_unlock_rcu_node(rnp); +} + +////////////////////////////////////////////////////////////////////////////// +// +// Printing RCU CPU stall warnings + +#ifdef CONFIG_PREEMPT + +/* + * Dump detailed information for all tasks blocking the current RCU + * grace period on the specified rcu_node structure. + */ +static void rcu_print_detail_task_stall_rnp(struct rcu_node *rnp) +{ + unsigned long flags; + struct task_struct *t; + + raw_spin_lock_irqsave_rcu_node(rnp, flags); + if (!rcu_preempt_blocked_readers_cgp(rnp)) { + raw_spin_unlock_irqrestore_rcu_node(rnp, flags); + return; + } + t = list_entry(rnp->gp_tasks->prev, + struct task_struct, rcu_node_entry); + list_for_each_entry_continue(t, &rnp->blkd_tasks, rcu_node_entry) { + /* + * We could be printing a lot while holding a spinlock. + * Avoid triggering hard lockup. + */ + touch_nmi_watchdog(); + sched_show_task(t); + } + raw_spin_unlock_irqrestore_rcu_node(rnp, flags); +} + +/* + * Scan the current list of tasks blocked within RCU read-side critical + * sections, printing out the tid of each. + */ +static int rcu_print_task_stall(struct rcu_node *rnp) +{ + struct task_struct *t; + int ndetected = 0; + + if (!rcu_preempt_blocked_readers_cgp(rnp)) + return 0; + pr_err("\tTasks blocked on level-%d rcu_node (CPUs %d-%d):", + rnp->level, rnp->grplo, rnp->grphi); + t = list_entry(rnp->gp_tasks->prev, + struct task_struct, rcu_node_entry); + list_for_each_entry_continue(t, &rnp->blkd_tasks, rcu_node_entry) { + pr_cont(" P%d", t->pid); + ndetected++; + } + pr_cont("\n"); + return ndetected; +} + +#else /* #ifdef CONFIG_PREEMPT */ + +/* + * Because preemptible RCU does not exist, we never have to check for + * tasks blocked within RCU read-side critical sections. + */ +static void rcu_print_detail_task_stall_rnp(struct rcu_node *rnp) +{ +} + +/* + * Because preemptible RCU does not exist, we never have to check for + * tasks blocked within RCU read-side critical sections. + */ +static int rcu_print_task_stall(struct rcu_node *rnp) +{ + return 0; +} +#endif /* #else #ifdef CONFIG_PREEMPT */ + +/* + * Dump stacks of all tasks running on stalled CPUs. First try using + * NMIs, but fall back to manual remote stack tracing on architectures + * that don't support NMI-based stack dumps. The NMI-triggered stack + * traces are more accurate because they are printed by the target CPU. + */ +static void rcu_dump_cpu_stacks(void) +{ + int cpu; + unsigned long flags; + struct rcu_node *rnp; + + rcu_for_each_leaf_node(rnp) { + raw_spin_lock_irqsave_rcu_node(rnp, flags); + for_each_leaf_node_possible_cpu(rnp, cpu) + if (rnp->qsmask & leaf_node_cpu_bit(rnp, cpu)) + if (!trigger_single_cpu_backtrace(cpu)) + dump_cpu_task(cpu); + raw_spin_unlock_irqrestore_rcu_node(rnp, flags); + } +} + +#ifdef CONFIG_RCU_FAST_NO_HZ + +static void print_cpu_stall_fast_no_hz(char *cp, int cpu) +{ + struct rcu_data *rdp = &per_cpu(rcu_data, cpu); + + sprintf(cp, "last_accelerate: %04lx/%04lx, Nonlazy posted: %c%c%c", + rdp->last_accelerate & 0xffff, jiffies & 0xffff, + ".l"[rdp->all_lazy], + ".L"[!rcu_segcblist_n_nonlazy_cbs(&rdp->cblist)], + ".D"[!!rdp->tick_nohz_enabled_snap]); +} + +#else /* #ifdef CONFIG_RCU_FAST_NO_HZ */ + +static void print_cpu_stall_fast_no_hz(char *cp, int cpu) +{ + *cp = '\0'; +} + +#endif /* #else #ifdef CONFIG_RCU_FAST_NO_HZ */ + +/* + * Print out diagnostic information for the specified stalled CPU. + * + * If the specified CPU is aware of the current RCU grace period, then + * print the number of scheduling clock interrupts the CPU has taken + * during the time that it has been aware. Otherwise, print the number + * of RCU grace periods that this CPU is ignorant of, for example, "1" + * if the CPU was aware of the previous grace period. + * + * Also print out idle and (if CONFIG_RCU_FAST_NO_HZ) idle-entry info. + */ +static void print_cpu_stall_info(int cpu) +{ + unsigned long delta; + char fast_no_hz[72]; + struct rcu_data *rdp = per_cpu_ptr(&rcu_data, cpu); + char *ticks_title; + unsigned long ticks_value; + + /* + * We could be printing a lot while holding a spinlock. Avoid + * triggering hard lockup. + */ + touch_nmi_watchdog(); + + ticks_value = rcu_seq_ctr(rcu_state.gp_seq - rdp->gp_seq); + if (ticks_value) { + ticks_title = "GPs behind"; + } else { + ticks_title = "ticks this GP"; + ticks_value = rdp->ticks_this_gp; + } + print_cpu_stall_fast_no_hz(fast_no_hz, cpu); + delta = rcu_seq_ctr(rdp->mynode->gp_seq - rdp->rcu_iw_gp_seq); + pr_err("\t%d-%c%c%c%c: (%lu %s) idle=%03x/%ld/%#lx softirq=%u/%u fqs=%ld %s\n", + cpu, + "O."[!!cpu_online(cpu)], + "o."[!!(rdp->grpmask & rdp->mynode->qsmaskinit)], + "N."[!!(rdp->grpmask & rdp->mynode->qsmaskinitnext)], + !IS_ENABLED(CONFIG_IRQ_WORK) ? '?' : + rdp->rcu_iw_pending ? (int)min(delta, 9UL) + '0' : + "!."[!delta], + ticks_value, ticks_title, + rcu_dynticks_snap(rdp) & 0xfff, + rdp->dynticks_nesting, rdp->dynticks_nmi_nesting, + rdp->softirq_snap, kstat_softirqs_cpu(RCU_SOFTIRQ, cpu), + READ_ONCE(rcu_state.n_force_qs) - rcu_state.n_force_qs_gpstart, + fast_no_hz); +} + +/* Complain about starvation of grace-period kthread. */ +static void rcu_check_gp_kthread_starvation(void) +{ + struct task_struct *gpk = rcu_state.gp_kthread; + unsigned long j; + + j = jiffies - READ_ONCE(rcu_state.gp_activity); + if (j > 2 * HZ) { + pr_err("%s kthread starved for %ld jiffies! g%ld f%#x %s(%d) ->state=%#lx ->cpu=%d\n", + rcu_state.name, j, + (long)rcu_seq_current(&rcu_state.gp_seq), + READ_ONCE(rcu_state.gp_flags), + gp_state_getname(rcu_state.gp_state), rcu_state.gp_state, + gpk ? gpk->state : ~0, gpk ? task_cpu(gpk) : -1); + if (gpk) { + pr_err("RCU grace-period kthread stack dump:\n"); + sched_show_task(gpk); + wake_up_process(gpk); + } + } +} + +static void print_other_cpu_stall(unsigned long gp_seq) +{ + int cpu; + unsigned long flags; + unsigned long gpa; + unsigned long j; + int ndetected = 0; + struct rcu_node *rnp; + long totqlen = 0; + + /* Kick and suppress, if so configured. */ + rcu_stall_kick_kthreads(); + if (rcu_cpu_stall_suppress) + return; + + /* + * OK, time to rat on our buddy... + * See Documentation/RCU/stallwarn.txt for info on how to debug + * RCU CPU stall warnings. + */ + pr_err("INFO: %s detected stalls on CPUs/tasks:\n", rcu_state.name); + rcu_for_each_leaf_node(rnp) { + raw_spin_lock_irqsave_rcu_node(rnp, flags); + ndetected += rcu_print_task_stall(rnp); + if (rnp->qsmask != 0) { + for_each_leaf_node_possible_cpu(rnp, cpu) + if (rnp->qsmask & leaf_node_cpu_bit(rnp, cpu)) { + print_cpu_stall_info(cpu); + ndetected++; + } + } + raw_spin_unlock_irqrestore_rcu_node(rnp, flags); + } + + for_each_possible_cpu(cpu) + totqlen += rcu_get_n_cbs_cpu(cpu); + pr_cont("\t(detected by %d, t=%ld jiffies, g=%ld, q=%lu)\n", + smp_processor_id(), (long)(jiffies - rcu_state.gp_start), + (long)rcu_seq_current(&rcu_state.gp_seq), totqlen); + if (ndetected) { + rcu_dump_cpu_stacks(); + + /* Complain about tasks blocking the grace period. */ + rcu_for_each_leaf_node(rnp) + rcu_print_detail_task_stall_rnp(rnp); + } else { + if (rcu_seq_current(&rcu_state.gp_seq) != gp_seq) { + pr_err("INFO: Stall ended before state dump start\n"); + } else { + j = jiffies; + gpa = READ_ONCE(rcu_state.gp_activity); + pr_err("All QSes seen, last %s kthread activity %ld (%ld-%ld), jiffies_till_next_fqs=%ld, root ->qsmask %#lx\n", + rcu_state.name, j - gpa, j, gpa, + READ_ONCE(jiffies_till_next_fqs), + rcu_get_root()->qsmask); + /* In this case, the current CPU might be at fault. */ + sched_show_task(current); + } + } + /* Rewrite if needed in case of slow consoles. */ + if (ULONG_CMP_GE(jiffies, READ_ONCE(rcu_state.jiffies_stall))) + WRITE_ONCE(rcu_state.jiffies_stall, + jiffies + 3 * rcu_jiffies_till_stall_check() + 3); + + rcu_check_gp_kthread_starvation(); + + panic_on_rcu_stall(); + + rcu_force_quiescent_state(); /* Kick them all. */ +} + +static void print_cpu_stall(void) +{ + int cpu; + unsigned long flags; + struct rcu_data *rdp = this_cpu_ptr(&rcu_data); + struct rcu_node *rnp = rcu_get_root(); + long totqlen = 0; + + /* Kick and suppress, if so configured. */ + rcu_stall_kick_kthreads(); + if (rcu_cpu_stall_suppress) + return; + + /* + * OK, time to rat on ourselves... + * See Documentation/RCU/stallwarn.txt for info on how to debug + * RCU CPU stall warnings. + */ + pr_err("INFO: %s self-detected stall on CPU\n", rcu_state.name); + raw_spin_lock_irqsave_rcu_node(rdp->mynode, flags); + print_cpu_stall_info(smp_processor_id()); + raw_spin_unlock_irqrestore_rcu_node(rdp->mynode, flags); + for_each_possible_cpu(cpu) + totqlen += rcu_get_n_cbs_cpu(cpu); + pr_cont("\t(t=%lu jiffies g=%ld q=%lu)\n", + jiffies - rcu_state.gp_start, + (long)rcu_seq_current(&rcu_state.gp_seq), totqlen); + + rcu_check_gp_kthread_starvation(); + + rcu_dump_cpu_stacks(); + + raw_spin_lock_irqsave_rcu_node(rnp, flags); + /* Rewrite if needed in case of slow consoles. */ + if (ULONG_CMP_GE(jiffies, READ_ONCE(rcu_state.jiffies_stall))) + WRITE_ONCE(rcu_state.jiffies_stall, + jiffies + 3 * rcu_jiffies_till_stall_check() + 3); + raw_spin_unlock_irqrestore_rcu_node(rnp, flags); + + panic_on_rcu_stall(); + + /* + * Attempt to revive the RCU machinery by forcing a context switch. + * + * A context switch would normally allow the RCU state machine to make + * progress and it could be we're stuck in kernel space without context + * switches for an entirely unreasonable amount of time. + */ + set_tsk_need_resched(current); + set_preempt_need_resched(); +} + +static void check_cpu_stall(struct rcu_data *rdp) +{ + unsigned long gs1; + unsigned long gs2; + unsigned long gps; + unsigned long j; + unsigned long jn; + unsigned long js; + struct rcu_node *rnp; + + if ((rcu_cpu_stall_suppress && !rcu_kick_kthreads) || + !rcu_gp_in_progress()) + return; + rcu_stall_kick_kthreads(); + j = jiffies; + + /* + * Lots of memory barriers to reject false positives. + * + * The idea is to pick up rcu_state.gp_seq, then + * rcu_state.jiffies_stall, then rcu_state.gp_start, and finally + * another copy of rcu_state.gp_seq. These values are updated in + * the opposite order with memory barriers (or equivalent) during + * grace-period initialization and cleanup. Now, a false positive + * can occur if we get an new value of rcu_state.gp_start and a old + * value of rcu_state.jiffies_stall. But given the memory barriers, + * the only way that this can happen is if one grace period ends + * and another starts between these two fetches. This is detected + * by comparing the second fetch of rcu_state.gp_seq with the + * previous fetch from rcu_state.gp_seq. + * + * Given this check, comparisons of jiffies, rcu_state.jiffies_stall, + * and rcu_state.gp_start suffice to forestall false positives. + */ + gs1 = READ_ONCE(rcu_state.gp_seq); + smp_rmb(); /* Pick up ->gp_seq first... */ + js = READ_ONCE(rcu_state.jiffies_stall); + smp_rmb(); /* ...then ->jiffies_stall before the rest... */ + gps = READ_ONCE(rcu_state.gp_start); + smp_rmb(); /* ...and finally ->gp_start before ->gp_seq again. */ + gs2 = READ_ONCE(rcu_state.gp_seq); + if (gs1 != gs2 || + ULONG_CMP_LT(j, js) || + ULONG_CMP_GE(gps, js)) + return; /* No stall or GP completed since entering function. */ + rnp = rdp->mynode; + jn = jiffies + 3 * rcu_jiffies_till_stall_check() + 3; + if (rcu_gp_in_progress() && + (READ_ONCE(rnp->qsmask) & rdp->grpmask) && + cmpxchg(&rcu_state.jiffies_stall, js, jn) == js) { + + /* We haven't checked in, so go dump stack. */ + print_cpu_stall(); + + } else if (rcu_gp_in_progress() && + ULONG_CMP_GE(j, js + RCU_STALL_RAT_DELAY) && + cmpxchg(&rcu_state.jiffies_stall, js, jn) == js) { + + /* They had a few time units to dump stack, so complain. */ + print_other_cpu_stall(gs2); + } +} + +////////////////////////////////////////////////////////////////////////////// +// +// RCU forward-progress mechanisms, including of callback invocation. + + +/* + * Show the state of the grace-period kthreads. + */ +void show_rcu_gp_kthreads(void) +{ + int cpu; + unsigned long j; + unsigned long ja; + unsigned long jr; + unsigned long jw; + struct rcu_data *rdp; + struct rcu_node *rnp; + + j = jiffies; + ja = j - READ_ONCE(rcu_state.gp_activity); + jr = j - READ_ONCE(rcu_state.gp_req_activity); + jw = j - READ_ONCE(rcu_state.gp_wake_time); + pr_info("%s: wait state: %s(%d) ->state: %#lx delta ->gp_activity %lu ->gp_req_activity %lu ->gp_wake_time %lu ->gp_wake_seq %ld ->gp_seq %ld ->gp_seq_needed %ld ->gp_flags %#x\n", + rcu_state.name, gp_state_getname(rcu_state.gp_state), + rcu_state.gp_state, + rcu_state.gp_kthread ? rcu_state.gp_kthread->state : 0x1ffffL, + ja, jr, jw, (long)READ_ONCE(rcu_state.gp_wake_seq), + (long)READ_ONCE(rcu_state.gp_seq), + (long)READ_ONCE(rcu_get_root()->gp_seq_needed), + READ_ONCE(rcu_state.gp_flags)); + rcu_for_each_node_breadth_first(rnp) { + if (ULONG_CMP_GE(rcu_state.gp_seq, rnp->gp_seq_needed)) + continue; + pr_info("\trcu_node %d:%d ->gp_seq %ld ->gp_seq_needed %ld\n", + rnp->grplo, rnp->grphi, (long)rnp->gp_seq, + (long)rnp->gp_seq_needed); + if (!rcu_is_leaf_node(rnp)) + continue; + for_each_leaf_node_possible_cpu(rnp, cpu) { + rdp = per_cpu_ptr(&rcu_data, cpu); + if (rdp->gpwrap || + ULONG_CMP_GE(rcu_state.gp_seq, + rdp->gp_seq_needed)) + continue; + pr_info("\tcpu %d ->gp_seq_needed %ld\n", + cpu, (long)rdp->gp_seq_needed); + } + } + /* sched_show_task(rcu_state.gp_kthread); */ +} +EXPORT_SYMBOL_GPL(show_rcu_gp_kthreads); + +/* + * This function checks for grace-period requests that fail to motivate + * RCU to come out of its idle mode. + */ +static void rcu_check_gp_start_stall(struct rcu_node *rnp, struct rcu_data *rdp, + const unsigned long gpssdelay) +{ + unsigned long flags; + unsigned long j; + struct rcu_node *rnp_root = rcu_get_root(); + static atomic_t warned = ATOMIC_INIT(0); + + if (!IS_ENABLED(CONFIG_PROVE_RCU) || rcu_gp_in_progress() || + ULONG_CMP_GE(rnp_root->gp_seq, rnp_root->gp_seq_needed)) + return; + j = jiffies; /* Expensive access, and in common case don't get here. */ + if (time_before(j, READ_ONCE(rcu_state.gp_req_activity) + gpssdelay) || + time_before(j, READ_ONCE(rcu_state.gp_activity) + gpssdelay) || + atomic_read(&warned)) + return; + + raw_spin_lock_irqsave_rcu_node(rnp, flags); + j = jiffies; + if (rcu_gp_in_progress() || + ULONG_CMP_GE(rnp_root->gp_seq, rnp_root->gp_seq_needed) || + time_before(j, READ_ONCE(rcu_state.gp_req_activity) + gpssdelay) || + time_before(j, READ_ONCE(rcu_state.gp_activity) + gpssdelay) || + atomic_read(&warned)) { + raw_spin_unlock_irqrestore_rcu_node(rnp, flags); + return; + } + /* Hold onto the leaf lock to make others see warned==1. */ + + if (rnp_root != rnp) + raw_spin_lock_rcu_node(rnp_root); /* irqs already disabled. */ + j = jiffies; + if (rcu_gp_in_progress() || + ULONG_CMP_GE(rnp_root->gp_seq, rnp_root->gp_seq_needed) || + time_before(j, rcu_state.gp_req_activity + gpssdelay) || + time_before(j, rcu_state.gp_activity + gpssdelay) || + atomic_xchg(&warned, 1)) { + raw_spin_unlock_rcu_node(rnp_root); /* irqs remain disabled. */ + raw_spin_unlock_irqrestore_rcu_node(rnp, flags); + return; + } + WARN_ON(1); + if (rnp_root != rnp) + raw_spin_unlock_rcu_node(rnp_root); + raw_spin_unlock_irqrestore_rcu_node(rnp, flags); + show_rcu_gp_kthreads(); +} + +/* + * Do a forward-progress check for rcutorture. This is normally invoked + * due to an OOM event. The argument "j" gives the time period during + * which rcutorture would like progress to have been made. + */ +void rcu_fwd_progress_check(unsigned long j) +{ + unsigned long cbs; + int cpu; + unsigned long max_cbs = 0; + int max_cpu = -1; + struct rcu_data *rdp; + + if (rcu_gp_in_progress()) { + pr_info("%s: GP age %lu jiffies\n", + __func__, jiffies - rcu_state.gp_start); + show_rcu_gp_kthreads(); + } else { + pr_info("%s: Last GP end %lu jiffies ago\n", + __func__, jiffies - rcu_state.gp_end); + preempt_disable(); + rdp = this_cpu_ptr(&rcu_data); + rcu_check_gp_start_stall(rdp->mynode, rdp, j); + preempt_enable(); + } + for_each_possible_cpu(cpu) { + cbs = rcu_get_n_cbs_cpu(cpu); + if (!cbs) + continue; + if (max_cpu < 0) + pr_info("%s: callbacks", __func__); + pr_cont(" %d: %lu", cpu, cbs); + if (cbs <= max_cbs) + continue; + max_cbs = cbs; + max_cpu = cpu; + } + if (max_cpu >= 0) + pr_cont("\n"); +} +EXPORT_SYMBOL_GPL(rcu_fwd_progress_check); + +/* Commandeer a sysrq key to dump RCU's tree. */ +static bool sysrq_rcu; +module_param(sysrq_rcu, bool, 0444); + +/* Dump grace-period-request information due to commandeered sysrq. */ +static void sysrq_show_rcu(int key) +{ + show_rcu_gp_kthreads(); +} + +static struct sysrq_key_op sysrq_rcudump_op = { + .handler = sysrq_show_rcu, + .help_msg = "show-rcu(y)", + .action_msg = "Show RCU tree", + .enable_mask = SYSRQ_ENABLE_DUMP, +}; + +static int __init rcu_sysrq_init(void) +{ + if (sysrq_rcu) + return register_sysrq_key('y', &sysrq_rcudump_op); + return 0; +} +early_initcall(rcu_sysrq_init); diff --git a/kernel/rcu/update.c b/kernel/rcu/update.c index cbaa976c5945..c3bf44ba42e5 100644 --- a/kernel/rcu/update.c +++ b/kernel/rcu/update.c @@ -424,68 +424,11 @@ EXPORT_SYMBOL_GPL(do_trace_rcu_torture_read); #endif #ifdef CONFIG_RCU_STALL_COMMON - -#ifdef CONFIG_PROVE_RCU -#define RCU_STALL_DELAY_DELTA (5 * HZ) -#else -#define RCU_STALL_DELAY_DELTA 0 -#endif - int rcu_cpu_stall_suppress __read_mostly; /* 1 = suppress stall warnings. */ EXPORT_SYMBOL_GPL(rcu_cpu_stall_suppress); -static int rcu_cpu_stall_timeout __read_mostly = CONFIG_RCU_CPU_STALL_TIMEOUT; - module_param(rcu_cpu_stall_suppress, int, 0644); +int rcu_cpu_stall_timeout __read_mostly = CONFIG_RCU_CPU_STALL_TIMEOUT; module_param(rcu_cpu_stall_timeout, int, 0644); - -int rcu_jiffies_till_stall_check(void) -{ - int till_stall_check = READ_ONCE(rcu_cpu_stall_timeout); - - /* - * Limit check must be consistent with the Kconfig limits - * for CONFIG_RCU_CPU_STALL_TIMEOUT. - */ - if (till_stall_check < 3) { - WRITE_ONCE(rcu_cpu_stall_timeout, 3); - till_stall_check = 3; - } else if (till_stall_check > 300) { - WRITE_ONCE(rcu_cpu_stall_timeout, 300); - till_stall_check = 300; - } - return till_stall_check * HZ + RCU_STALL_DELAY_DELTA; -} -EXPORT_SYMBOL_GPL(rcu_jiffies_till_stall_check); - -void rcu_sysrq_start(void) -{ - if (!rcu_cpu_stall_suppress) - rcu_cpu_stall_suppress = 2; -} - -void rcu_sysrq_end(void) -{ - if (rcu_cpu_stall_suppress == 2) - rcu_cpu_stall_suppress = 0; -} - -static int rcu_panic(struct notifier_block *this, unsigned long ev, void *ptr) -{ - rcu_cpu_stall_suppress = 1; - return NOTIFY_DONE; -} - -static struct notifier_block rcu_panic_block = { - .notifier_call = rcu_panic, -}; - -static int __init check_cpu_stall_init(void) -{ - atomic_notifier_chain_register(&panic_notifier_list, &rcu_panic_block); - return 0; -} -early_initcall(check_cpu_stall_init); - #endif /* #ifdef CONFIG_RCU_STALL_COMMON */ #ifdef CONFIG_TASKS_RCU diff --git a/kernel/torture.c b/kernel/torture.c index 8faa1a9aaeb9..17b2be9bde12 100644 --- a/kernel/torture.c +++ b/kernel/torture.c @@ -88,6 +88,8 @@ bool torture_offline(int cpu, long *n_offl_attempts, long *n_offl_successes, if (!cpu_online(cpu) || !cpu_is_hotpluggable(cpu)) return false; + if (num_online_cpus() <= 1) + return false; /* Can't offline the last CPU. */ if (verbose > 1) pr_alert("%s" TORTURE_FLAG diff --git a/net/ipv4/netfilter/ipt_CLUSTERIP.c b/net/ipv4/netfilter/ipt_CLUSTERIP.c index 835d50b279f5..a2a88ab07f7b 100644 --- a/net/ipv4/netfilter/ipt_CLUSTERIP.c +++ b/net/ipv4/netfilter/ipt_CLUSTERIP.c @@ -56,7 +56,7 @@ struct clusterip_config { #endif enum clusterip_hashmode hash_mode; /* which hashing mode */ u_int32_t hash_initval; /* hash initialization */ - struct rcu_head rcu; /* for call_rcu_bh */ + struct rcu_head rcu; /* for call_rcu */ struct net *net; /* netns for pernet list */ char ifname[IFNAMSIZ]; /* device ifname */ }; diff --git a/tools/memory-model/Documentation/explanation.txt b/tools/memory-model/Documentation/explanation.txt index 35bff92cc773..68caa9a976d0 100644 --- a/tools/memory-model/Documentation/explanation.txt +++ b/tools/memory-model/Documentation/explanation.txt @@ -27,7 +27,7 @@ Explanation of the Linux-Kernel Memory Consistency Model 19. AND THEN THERE WAS ALPHA 20. THE HAPPENS-BEFORE RELATION: hb 21. THE PROPAGATES-BEFORE RELATION: pb - 22. RCU RELATIONS: rcu-link, gp, rscs, rcu-fence, and rb + 22. RCU RELATIONS: rcu-link, rcu-gp, rcu-rscsi, rcu-fence, and rb 23. LOCKING 24. ODDS AND ENDS @@ -1430,8 +1430,8 @@ they execute means that it cannot have cycles. This requirement is the content of the LKMM's "propagation" axiom. -RCU RELATIONS: rcu-link, gp, rscs, rcu-fence, and rb ----------------------------------------------------- +RCU RELATIONS: rcu-link, rcu-gp, rcu-rscsi, rcu-fence, and rb +------------------------------------------------------------- RCU (Read-Copy-Update) is a powerful synchronization mechanism. It rests on two concepts: grace periods and read-side critical sections. @@ -1446,17 +1446,19 @@ As far as memory models are concerned, RCU's main feature is its Grace-Period Guarantee, which states that a critical section can never span a full grace period. In more detail, the Guarantee says: - If a critical section starts before a grace period then it - must end before the grace period does. In addition, every - store that propagates to the critical section's CPU before the - end of the critical section must propagate to every CPU before - the end of the grace period. + For any critical section C and any grace period G, at least + one of the following statements must hold: - If a critical section ends after a grace period ends then it - must start after the grace period does. In addition, every - store that propagates to the grace period's CPU before the - start of the grace period must propagate to every CPU before - the start of the critical section. +(1) C ends before G does, and in addition, every store that + propagates to C's CPU before the end of C must propagate to + every CPU before G ends. + +(2) G starts before C does, and in addition, every store that + propagates to G's CPU before the start of G must propagate + to every CPU before C starts. + +In particular, it is not possible for a critical section to both start +before and end after a grace period. Here is a simple example of RCU in action: @@ -1483,10 +1485,11 @@ The Grace Period Guarantee tells us that when this code runs, it will never end with r1 = 1 and r2 = 0. The reasoning is as follows. r1 = 1 means that P0's store to x propagated to P1 before P1 called synchronize_rcu(), so P0's critical section must have started before -P1's grace period. On the other hand, r2 = 0 means that P0's store to -y, which occurs before the end of the critical section, did not -propagate to P1 before the end of the grace period, violating the -Guarantee. +P1's grace period, contrary to part (2) of the Guarantee. On the +other hand, r2 = 0 means that P0's store to y, which occurs before the +end of the critical section, did not propagate to P1 before the end of +the grace period, contrary to part (1). Together the results violate +the Guarantee. In the kernel's implementations of RCU, the requirements for stores to propagate to every CPU are fulfilled by placing strong fences at @@ -1504,11 +1507,11 @@ before" or "ends after" a grace period? Some aspects of the meaning are pretty obvious, as in the example above, but the details aren't entirely clear. The LKMM formalizes this notion by means of the rcu-link relation. rcu-link encompasses a very general notion of -"before": Among other things, X ->rcu-link Z includes cases where X -happens-before or is equal to some event Y which is equal to or comes -before Z in the coherence order. When Y = Z this says that X ->rfe Z -implies X ->rcu-link Z. In addition, when Y = X it says that X ->fr Z -and X ->co Z each imply X ->rcu-link Z. +"before": If E and F are RCU fence events (i.e., rcu_read_lock(), +rcu_read_unlock(), or synchronize_rcu()) then among other things, +E ->rcu-link F includes cases where E is po-before some memory-access +event X, F is po-after some memory-access event Y, and we have any of +X ->rfe Y, X ->co Y, or X ->fr Y. The formal definition of the rcu-link relation is more than a little obscure, and we won't give it here. It is closely related to the pb @@ -1516,171 +1519,173 @@ relation, and the details don't matter unless you want to comb through a somewhat lengthy formal proof. Pretty much all you need to know about rcu-link is the information in the preceding paragraph. -The LKMM also defines the gp and rscs relations. They bring grace -periods and read-side critical sections into the picture, in the +The LKMM also defines the rcu-gp and rcu-rscsi relations. They bring +grace periods and read-side critical sections into the picture, in the following way: - E ->gp F means there is a synchronize_rcu() fence event S such - that E ->po S and either S ->po F or S = F. In simple terms, - there is a grace period po-between E and F. + E ->rcu-gp F means that E and F are in fact the same event, + and that event is a synchronize_rcu() fence (i.e., a grace + period). - E ->rscs F means there is a critical section delimited by an - rcu_read_lock() fence L and an rcu_read_unlock() fence U, such - that E ->po U and either L ->po F or L = F. You can think of - this as saying that E and F are in the same critical section - (in fact, it also allows E to be po-before the start of the - critical section and F to be po-after the end). + E ->rcu-rscsi F means that E and F are the rcu_read_unlock() + and rcu_read_lock() fence events delimiting some read-side + critical section. (The 'i' at the end of the name emphasizes + that this relation is "inverted": It links the end of the + critical section to the start.) If we think of the rcu-link relation as standing for an extended -"before", then X ->gp Y ->rcu-link Z says that X executes before a -grace period which ends before Z executes. (In fact it covers more -than this, because it also includes cases where X executes before a -grace period and some store propagates to Z's CPU before Z executes -but doesn't propagate to some other CPU until after the grace period -ends.) Similarly, X ->rscs Y ->rcu-link Z says that X is part of (or -before the start of) a critical section which starts before Z -executes. - -The LKMM goes on to define the rcu-fence relation as a sequence of gp -and rscs links separated by rcu-link links, in which the number of gp -links is >= the number of rscs links. For example: +"before", then X ->rcu-gp Y ->rcu-link Z roughly says that X is a +grace period which ends before Z begins. (In fact it covers more than +this, because it also includes cases where some store propagates to +Z's CPU before Z begins but doesn't propagate to some other CPU until +after X ends.) Similarly, X ->rcu-rscsi Y ->rcu-link Z says that X is +the end of a critical section which starts before Z begins. + +The LKMM goes on to define the rcu-fence relation as a sequence of +rcu-gp and rcu-rscsi links separated by rcu-link links, in which the +number of rcu-gp links is >= the number of rcu-rscsi links. For +example: - X ->gp Y ->rcu-link Z ->rscs T ->rcu-link U ->gp V + X ->rcu-gp Y ->rcu-link Z ->rcu-rscsi T ->rcu-link U ->rcu-gp V would imply that X ->rcu-fence V, because this sequence contains two -gp links and only one rscs link. (It also implies that X ->rcu-fence T -and Z ->rcu-fence V.) On the other hand: +rcu-gp links and one rcu-rscsi link. (It also implies that +X ->rcu-fence T and Z ->rcu-fence V.) On the other hand: - X ->rscs Y ->rcu-link Z ->rscs T ->rcu-link U ->gp V + X ->rcu-rscsi Y ->rcu-link Z ->rcu-rscsi T ->rcu-link U ->rcu-gp V does not imply X ->rcu-fence V, because the sequence contains only -one gp link but two rscs links. +one rcu-gp link but two rcu-rscsi links. The rcu-fence relation is important because the Grace Period Guarantee means that rcu-fence acts kind of like a strong fence. In particular, -if W is a write and we have W ->rcu-fence Z, the Guarantee says that W -will propagate to every CPU before Z executes. +E ->rcu-fence F implies not only that E begins before F ends, but also +that any write po-before E will propagate to every CPU before any +instruction po-after F can execute. (However, it does not imply that +E must execute before F; in fact, each synchronize_rcu() fence event +is linked to itself by rcu-fence as a degenerate case.) To prove this in full generality requires some intellectual effort. We'll consider just a very simple case: - W ->gp X ->rcu-link Y ->rscs Z. + G ->rcu-gp W ->rcu-link Z ->rcu-rscsi F. -This formula means that there is a grace period G and a critical -section C such that: +This formula means that G and W are the same event (a grace period), +and there are events X, Y and a read-side critical section C such that: - 1. W is po-before G; + 1. G = W is po-before or equal to X; - 2. X is equal to or po-after G; + 2. X comes "before" Y in some sense (including rfe, co and fr); - 3. X comes "before" Y in some sense; + 2. Y is po-before Z; - 4. Y is po-before the end of C; + 4. Z is the rcu_read_unlock() event marking the end of C; - 5. Z is equal to or po-after the start of C. + 5. F is the rcu_read_lock() event marking the start of C. -From 2 - 4 we deduce that the grace period G ends before the critical -section C. Then the second part of the Grace Period Guarantee says -not only that G starts before C does, but also that W (which executes -on G's CPU before G starts) must propagate to every CPU before C -starts. In particular, W propagates to every CPU before Z executes -(or finishes executing, in the case where Z is equal to the -rcu_read_lock() fence event which starts C.) This sort of reasoning -can be expanded to handle all the situations covered by rcu-fence. +From 1 - 4 we deduce that the grace period G ends before the critical +section C. Then part (2) of the Grace Period Guarantee says not only +that G starts before C does, but also that any write which executes on +G's CPU before G starts must propagate to every CPU before C starts. +In particular, the write propagates to every CPU before F finishes +executing and hence before any instruction po-after F can execute. +This sort of reasoning can be extended to handle all the situations +covered by rcu-fence. Finally, the LKMM defines the RCU-before (rb) relation in terms of rcu-fence. This is done in essentially the same way as the pb relation was defined in terms of strong-fence. We will omit the -details; the end result is that E ->rb F implies E must execute before -F, just as E ->pb F does (and for much the same reasons). +details; the end result is that E ->rb F implies E must execute +before F, just as E ->pb F does (and for much the same reasons). Putting this all together, the LKMM expresses the Grace Period Guarantee by requiring that the rb relation does not contain a cycle. -Equivalently, this "rcu" axiom requires that there are no events E and -F with E ->rcu-link F ->rcu-fence E. Or to put it a third way, the -axiom requires that there are no cycles consisting of gp and rscs -alternating with rcu-link, where the number of gp links is >= the -number of rscs links. +Equivalently, this "rcu" axiom requires that there are no events E +and F with E ->rcu-link F ->rcu-fence E. Or to put it a third way, +the axiom requires that there are no cycles consisting of rcu-gp and +rcu-rscsi alternating with rcu-link, where the number of rcu-gp links +is >= the number of rcu-rscsi links. Justifying the axiom isn't easy, but it is in fact a valid formalization of the Grace Period Guarantee. We won't attempt to go through the detailed argument, but the following analysis gives a -taste of what is involved. Suppose we have a violation of the first -part of the Guarantee: A critical section starts before a grace -period, and some store propagates to the critical section's CPU before -the end of the critical section but doesn't propagate to some other -CPU until after the end of the grace period. +taste of what is involved. Suppose both parts of the Guarantee are +violated: A critical section starts before a grace period, and some +store propagates to the critical section's CPU before the end of the +critical section but doesn't propagate to some other CPU until after +the end of the grace period. Putting symbols to these ideas, let L and U be the rcu_read_lock() and rcu_read_unlock() fence events delimiting the critical section in question, and let S be the synchronize_rcu() fence event for the grace period. Saying that the critical section starts before S means there -are events E and F where E is po-after L (which marks the start of the -critical section), E is "before" F in the sense of the rcu-link -relation, and F is po-before the grace period S: +are events Q and R where Q is po-after L (which marks the start of the +critical section), Q is "before" R in the sense used by the rcu-link +relation, and R is po-before the grace period S. Thus we have: - L ->po E ->rcu-link F ->po S. + L ->rcu-link S. -Let W be the store mentioned above, let Z come before the end of the +Let W be the store mentioned above, let Y come before the end of the critical section and witness that W propagates to the critical -section's CPU by reading from W, and let Y on some arbitrary CPU be a -witness that W has not propagated to that CPU, where Y happens after +section's CPU by reading from W, and let Z on some arbitrary CPU be a +witness that W has not propagated to that CPU, where Z happens after some event X which is po-after S. Symbolically, this amounts to: - S ->po X ->hb* Y ->fr W ->rf Z ->po U. + S ->po X ->hb* Z ->fr W ->rf Y ->po U. -The fr link from Y to W indicates that W has not propagated to Y's CPU -at the time that Y executes. From this, it can be shown (see the -discussion of the rcu-link relation earlier) that X and Z are related -by rcu-link, yielding: +The fr link from Z to W indicates that W has not propagated to Z's CPU +at the time that Z executes. From this, it can be shown (see the +discussion of the rcu-link relation earlier) that S and U are related +by rcu-link: - S ->po X ->rcu-link Z ->po U. + S ->rcu-link U. -The formulas say that S is po-between F and X, hence F ->gp X. They -also say that Z comes before the end of the critical section and E -comes after its start, hence Z ->rscs E. From all this we obtain: +Since S is a grace period we have S ->rcu-gp S, and since L and U are +the start and end of the critical section C we have U ->rcu-rscsi L. +From this we obtain: - F ->gp X ->rcu-link Z ->rscs E ->rcu-link F, + S ->rcu-gp S ->rcu-link U ->rcu-rscsi L ->rcu-link S, a forbidden cycle. Thus the "rcu" axiom rules out this violation of the Grace Period Guarantee. For something a little more down-to-earth, let's see how the axiom works out in practice. Consider the RCU code example from above, this -time with statement labels added to the memory access instructions: +time with statement labels added: int x, y; P0() { - rcu_read_lock(); - W: WRITE_ONCE(x, 1); - X: WRITE_ONCE(y, 1); - rcu_read_unlock(); + L: rcu_read_lock(); + X: WRITE_ONCE(x, 1); + Y: WRITE_ONCE(y, 1); + U: rcu_read_unlock(); } P1() { int r1, r2; - Y: r1 = READ_ONCE(x); - synchronize_rcu(); - Z: r2 = READ_ONCE(y); + Z: r1 = READ_ONCE(x); + S: synchronize_rcu(); + W: r2 = READ_ONCE(y); } -If r2 = 0 at the end then P0's store at X overwrites the value that -P1's load at Z reads from, so we have Z ->fre X and thus Z ->rcu-link X. -In addition, there is a synchronize_rcu() between Y and Z, so therefore -we have Y ->gp Z. +If r2 = 0 at the end then P0's store at Y overwrites the value that +P1's load at W reads from, so we have W ->fre Y. Since S ->po W and +also Y ->po U, we get S ->rcu-link U. In addition, S ->rcu-gp S +because S is a grace period. -If r1 = 1 at the end then P1's load at Y reads from P0's store at W, -so we have W ->rcu-link Y. In addition, W and X are in the same critical -section, so therefore we have X ->rscs W. +If r1 = 1 at the end then P1's load at Z reads from P0's store at X, +so we have X ->rfe Z. Together with L ->po X and Z ->po S, this +yields L ->rcu-link S. And since L and U are the start and end of a +critical section, we have U ->rcu-rscsi L. -Then X ->rscs W ->rcu-link Y ->gp Z ->rcu-link X is a forbidden cycle, -violating the "rcu" axiom. Hence the outcome is not allowed by the -LKMM, as we would expect. +Then U ->rcu-rscsi L ->rcu-link S ->rcu-gp S ->rcu-link U is a +forbidden cycle, violating the "rcu" axiom. Hence the outcome is not +allowed by the LKMM, as we would expect. For contrast, let's see what can happen in a more complicated example: @@ -1690,51 +1695,52 @@ For contrast, let's see what can happen in a more complicated example: { int r0; - rcu_read_lock(); - W: r0 = READ_ONCE(x); - X: WRITE_ONCE(y, 1); - rcu_read_unlock(); + L0: rcu_read_lock(); + r0 = READ_ONCE(x); + WRITE_ONCE(y, 1); + U0: rcu_read_unlock(); } P1() { int r1; - Y: r1 = READ_ONCE(y); - synchronize_rcu(); - Z: WRITE_ONCE(z, 1); + r1 = READ_ONCE(y); + S1: synchronize_rcu(); + WRITE_ONCE(z, 1); } P2() { int r2; - rcu_read_lock(); - U: r2 = READ_ONCE(z); - V: WRITE_ONCE(x, 1); - rcu_read_unlock(); + L2: rcu_read_lock(); + r2 = READ_ONCE(z); + WRITE_ONCE(x, 1); + U2: rcu_read_unlock(); } If r0 = r1 = r2 = 1 at the end, then similar reasoning to before shows -that W ->rscs X ->rcu-link Y ->gp Z ->rcu-link U ->rscs V ->rcu-link W. -However this cycle is not forbidden, because the sequence of relations -contains fewer instances of gp (one) than of rscs (two). Consequently -the outcome is allowed by the LKMM. The following instruction timing -diagram shows how it might actually occur: +that U0 ->rcu-rscsi L0 ->rcu-link S1 ->rcu-gp S1 ->rcu-link U2 ->rcu-rscsi +L2 ->rcu-link U0. However this cycle is not forbidden, because the +sequence of relations contains fewer instances of rcu-gp (one) than of +rcu-rscsi (two). Consequently the outcome is allowed by the LKMM. +The following instruction timing diagram shows how it might actually +occur: P0 P1 P2 -------------------- -------------------- -------------------- rcu_read_lock() -X: WRITE_ONCE(y, 1) - Y: r1 = READ_ONCE(y) +WRITE_ONCE(y, 1) + r1 = READ_ONCE(y) synchronize_rcu() starts . rcu_read_lock() - . V: WRITE_ONCE(x, 1) -W: r0 = READ_ONCE(x) . + . WRITE_ONCE(x, 1) +r0 = READ_ONCE(x) . rcu_read_unlock() . synchronize_rcu() ends - Z: WRITE_ONCE(z, 1) - U: r2 = READ_ONCE(z) + WRITE_ONCE(z, 1) + r2 = READ_ONCE(z) rcu_read_unlock() This requires P0 and P2 to execute their loads and stores out of @@ -1744,6 +1750,15 @@ section in P0 both starts before P1's grace period does and ends before it does, and the critical section in P2 both starts after P1's grace period does and ends after it does. +Addendum: The LKMM now supports SRCU (Sleepable Read-Copy-Update) in +addition to normal RCU. The ideas involved are much the same as +above, with new relations srcu-gp and srcu-rscsi added to represent +SRCU grace periods and read-side critical sections. There is a +restriction on the srcu-gp and srcu-rscsi links that can appear in an +rcu-fence sequence (the srcu-rscsi links must be paired with srcu-gp +links having the same SRCU domain with proper nesting); the details +are relatively unimportant. + LOCKING ------- diff --git a/tools/memory-model/README b/tools/memory-model/README index 0f2c366518c6..2b87f3971548 100644 --- a/tools/memory-model/README +++ b/tools/memory-model/README @@ -20,13 +20,17 @@ that litmus test to be exercised within the Linux kernel. REQUIREMENTS ============ -Version 7.49 of the "herd7" and "klitmus7" tools must be downloaded -separately: +Version 7.52 or higher of the "herd7" and "klitmus7" tools must be +downloaded separately: https://github.com/herd/herdtools7 See "herdtools7/INSTALL.md" for installation instructions. +Note that although these tools usually provide backwards compatibility, +this is not absolutely guaranteed. Therefore, if a later version does +not work, please try using the exact version called out above. + ================== BASIC USAGE: HERD7 @@ -221,8 +225,29 @@ The Linux-kernel memory model has the following limitations: additional call_rcu() process to the site of the emulated rcu-barrier(). - e. Sleepable RCU (SRCU) is not modeled. It can be - emulated, but perhaps not simply. + e. Although sleepable RCU (SRCU) is now modeled, there + are some subtle differences between its semantics and + those in the Linux kernel. For example, the kernel + might interpret the following sequence as two partially + overlapping SRCU read-side critical sections: + + 1 r1 = srcu_read_lock(&my_srcu); + 2 do_something_1(); + 3 r2 = srcu_read_lock(&my_srcu); + 4 do_something_2(); + 5 srcu_read_unlock(&my_srcu, r1); + 6 do_something_3(); + 7 srcu_read_unlock(&my_srcu, r2); + + In contrast, LKMM will interpret this as a nested pair of + SRCU read-side critical sections, with the outer critical + section spanning lines 1-7 and the inner critical section + spanning lines 3-5. + + This difference would be more of a concern had anyone + identified a reasonable use case for partially overlapping + SRCU read-side critical sections. For more information, + please see: https://paulmck.livejournal.com/40593.html f. Reader-writer locking is not modeled. It can be emulated in litmus tests using atomic read-modify-write diff --git a/tools/memory-model/linux-kernel.bell b/tools/memory-model/linux-kernel.bell index 796513362c05..def9131d3d8e 100644 --- a/tools/memory-model/linux-kernel.bell +++ b/tools/memory-model/linux-kernel.bell @@ -33,8 +33,14 @@ enum Barriers = 'wmb (*smp_wmb*) || 'after-unlock-lock (*smp_mb__after_unlock_lock*) instructions F[Barriers] +(* SRCU *) +enum SRCU = 'srcu-lock || 'srcu-unlock || 'sync-srcu +instructions SRCU[SRCU] +(* All srcu events *) +let Srcu = Srcu-lock | Srcu-unlock | Sync-srcu + (* Compute matching pairs of nested Rcu-lock and Rcu-unlock *) -let matched = let rec +let rcu-rscs = let rec unmatched-locks = Rcu-lock \ domain(matched) and unmatched-unlocks = Rcu-unlock \ range(matched) and unmatched = unmatched-locks | unmatched-unlocks @@ -46,8 +52,27 @@ let matched = let rec in matched (* Validate nesting *) -flag ~empty Rcu-lock \ domain(matched) as unbalanced-rcu-locking -flag ~empty Rcu-unlock \ range(matched) as unbalanced-rcu-locking +flag ~empty Rcu-lock \ domain(rcu-rscs) as unbalanced-rcu-locking +flag ~empty Rcu-unlock \ range(rcu-rscs) as unbalanced-rcu-locking + +(* Compute matching pairs of nested Srcu-lock and Srcu-unlock *) +let srcu-rscs = let rec + unmatched-locks = Srcu-lock \ domain(matched) + and unmatched-unlocks = Srcu-unlock \ range(matched) + and unmatched = unmatched-locks | unmatched-unlocks + and unmatched-po = ([unmatched] ; po ; [unmatched]) & loc + and unmatched-locks-to-unlocks = + ([unmatched-locks] ; po ; [unmatched-unlocks]) & loc + and matched = matched | (unmatched-locks-to-unlocks \ + (unmatched-po ; unmatched-po)) + in matched + +(* Validate nesting *) +flag ~empty Srcu-lock \ domain(srcu-rscs) as unbalanced-srcu-locking +flag ~empty Srcu-unlock \ range(srcu-rscs) as unbalanced-srcu-locking + +(* Check for use of synchronize_srcu() inside an RCU critical section *) +flag ~empty rcu-rscs & (po ; [Sync-srcu] ; po) as invalid-sleep -(* Outermost level of nesting only *) -let crit = matched \ (po^-1 ; matched ; po^-1) +(* Validate SRCU dynamic match *) +flag ~empty different-values(srcu-rscs) as srcu-bad-nesting diff --git a/tools/memory-model/linux-kernel.cat b/tools/memory-model/linux-kernel.cat index 8f23c74a96fd..8dcb37835b61 100644 --- a/tools/memory-model/linux-kernel.cat +++ b/tools/memory-model/linux-kernel.cat @@ -33,7 +33,7 @@ let mb = ([M] ; fencerel(Mb) ; [M]) | ([M] ; po? ; [LKW] ; fencerel(After-spinlock) ; [M]) | ([M] ; po ; [UL] ; (co | po) ; [LKW] ; fencerel(After-unlock-lock) ; [M]) -let gp = po ; [Sync-rcu] ; po? +let gp = po ; [Sync-rcu | Sync-srcu] ; po? let strong-fence = mb | gp @@ -91,32 +91,47 @@ acyclic pb as propagation (*******) (* - * Effect of read-side critical section proceeds from the rcu_read_lock() - * onward on the one hand and from the rcu_read_unlock() backwards on the - * other hand. + * Effects of read-side critical sections proceed from the rcu_read_unlock() + * or srcu_read_unlock() backwards on the one hand, and from the + * rcu_read_lock() or srcu_read_lock() forwards on the other hand. + * + * In the definition of rcu-fence below, the po term at the left-hand side + * of each disjunct and the po? term at the right-hand end have been factored + * out. They have been moved into the definitions of rcu-link and rb. + * This was necessary in order to apply the "& loc" tests correctly. *) -let rscs = po ; crit^-1 ; po? +let rcu-gp = [Sync-rcu] (* Compare with gp *) +let srcu-gp = [Sync-srcu] +let rcu-rscsi = rcu-rscs^-1 +let srcu-rscsi = srcu-rscs^-1 (* * The synchronize_rcu() strong fence is special in that it can order not * one but two non-rf relations, but only in conjunction with an RCU * read-side critical section. *) -let rcu-link = hb* ; pb* ; prop +let rcu-link = po? ; hb* ; pb* ; prop ; po (* * Any sequence containing at least as many grace periods as RCU read-side * critical sections (joined by rcu-link) acts as a generalized strong fence. + * Likewise for SRCU grace periods and read-side critical sections, provided + * the synchronize_srcu() and srcu_read_[un]lock() calls refer to the same + * struct srcu_struct location. *) -let rec rcu-fence = gp | - (gp ; rcu-link ; rscs) | - (rscs ; rcu-link ; gp) | - (gp ; rcu-link ; rcu-fence ; rcu-link ; rscs) | - (rscs ; rcu-link ; rcu-fence ; rcu-link ; gp) | +let rec rcu-fence = rcu-gp | srcu-gp | + (rcu-gp ; rcu-link ; rcu-rscsi) | + ((srcu-gp ; rcu-link ; srcu-rscsi) & loc) | + (rcu-rscsi ; rcu-link ; rcu-gp) | + ((srcu-rscsi ; rcu-link ; srcu-gp) & loc) | + (rcu-gp ; rcu-link ; rcu-fence ; rcu-link ; rcu-rscsi) | + ((srcu-gp ; rcu-link ; rcu-fence ; rcu-link ; srcu-rscsi) & loc) | + (rcu-rscsi ; rcu-link ; rcu-fence ; rcu-link ; rcu-gp) | + ((srcu-rscsi ; rcu-link ; rcu-fence ; rcu-link ; srcu-gp) & loc) | (rcu-fence ; rcu-link ; rcu-fence) (* rb orders instructions just as pb does *) -let rb = prop ; rcu-fence ; hb* ; pb* +let rb = prop ; po ; rcu-fence ; po? ; hb* ; pb* irreflexive rb as rcu diff --git a/tools/memory-model/linux-kernel.def b/tools/memory-model/linux-kernel.def index b27911cc087d..551eeaa389d4 100644 --- a/tools/memory-model/linux-kernel.def +++ b/tools/memory-model/linux-kernel.def @@ -47,6 +47,12 @@ rcu_read_unlock() { __fence{rcu-unlock}; } synchronize_rcu() { __fence{sync-rcu}; } synchronize_rcu_expedited() { __fence{sync-rcu}; } +// SRCU +srcu_read_lock(X) __srcu{srcu-lock}(X) +srcu_read_unlock(X,Y) { __srcu{srcu-unlock}(X,Y); } +synchronize_srcu(X) { __srcu{sync-srcu}(X); } +synchronize_srcu_expedited(X) { __srcu{sync-srcu}(X); } + // Atomic atomic_read(X) READ_ONCE(*X) atomic_set(X,V) { WRITE_ONCE(*X,V); } diff --git a/tools/memory-model/lock.cat b/tools/memory-model/lock.cat index 305ded17e741..a059d1a6d8a2 100644 --- a/tools/memory-model/lock.cat +++ b/tools/memory-model/lock.cat @@ -6,9 +6,6 @@ (* * Generate coherence orders and handle lock operations - * - * Warning: spin_is_locked() crashes herd7 versions strictly before 7.48. - * spin_is_locked() is functional from herd7 version 7.49. *) include "cross.cat" diff --git a/tools/testing/selftests/rcutorture/bin/configNR_CPUS.sh b/tools/testing/selftests/rcutorture/bin/configNR_CPUS.sh index 43540f1828cc..2deea2169fc2 100755 --- a/tools/testing/selftests/rcutorture/bin/configNR_CPUS.sh +++ b/tools/testing/selftests/rcutorture/bin/configNR_CPUS.sh @@ -1,4 +1,5 @@ #!/bin/bash +# SPDX-License-Identifier: GPL-2.0+ # # Extract the number of CPUs expected from the specified Kconfig-file # fragment by checking CONFIG_SMP and CONFIG_NR_CPUS. If the specified @@ -7,23 +8,9 @@ # # Usage: configNR_CPUS.sh config-frag # -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, you can access it online at -# http://www.gnu.org/licenses/gpl-2.0.html. -# # Copyright (C) IBM Corporation, 2013 # -# Authors: Paul E. McKenney <paulmck@linux.vnet.ibm.com> +# Authors: Paul E. McKenney <paulmck@linux.ibm.com> cf=$1 if test ! -r $cf diff --git a/tools/testing/selftests/rcutorture/bin/config_override.sh b/tools/testing/selftests/rcutorture/bin/config_override.sh index ef7fcbac3d42..90016c359e83 100755 --- a/tools/testing/selftests/rcutorture/bin/config_override.sh +++ b/tools/testing/selftests/rcutorture/bin/config_override.sh @@ -1,4 +1,5 @@ #!/bin/bash +# SPDX-License-Identifier: GPL-2.0+ # # config_override.sh base override # @@ -6,23 +7,9 @@ # that conflict with any in override, concatenating what remains and # sending the result to standard output. # -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, you can access it online at -# http://www.gnu.org/licenses/gpl-2.0.html. -# # Copyright (C) IBM Corporation, 2017 # -# Authors: Paul E. McKenney <paulmck@linux.vnet.ibm.com> +# Authors: Paul E. McKenney <paulmck@linux.ibm.com> base=$1 if test -r $base diff --git a/tools/testing/selftests/rcutorture/bin/configcheck.sh b/tools/testing/selftests/rcutorture/bin/configcheck.sh index 197deece7c7c..31584cee84d7 100755 --- a/tools/testing/selftests/rcutorture/bin/configcheck.sh +++ b/tools/testing/selftests/rcutorture/bin/configcheck.sh @@ -1,23 +1,11 @@ #!/bin/bash -# Usage: configcheck.sh .config .config-template -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. +# SPDX-License-Identifier: GPL-2.0+ # -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, you can access it online at -# http://www.gnu.org/licenses/gpl-2.0.html. +# Usage: configcheck.sh .config .config-template # # Copyright (C) IBM Corporation, 2011 # -# Authors: Paul E. McKenney <paulmck@linux.vnet.ibm.com> +# Authors: Paul E. McKenney <paulmck@linux.ibm.com> T=${TMPDIR-/tmp}/abat-chk-config.sh.$$ trap 'rm -rf $T' 0 @@ -26,6 +14,7 @@ mkdir $T cat $1 > $T/.config cat $2 | sed -e 's/\(.*\)=n/# \1 is not set/' -e 's/^#CHECK#//' | +grep -v '^CONFIG_INITRAMFS_SOURCE' | awk ' { print "if grep -q \"" $0 "\" < '"$T/.config"'"; diff --git a/tools/testing/selftests/rcutorture/bin/configinit.sh b/tools/testing/selftests/rcutorture/bin/configinit.sh index 65541c21a544..40359486b3a8 100755 --- a/tools/testing/selftests/rcutorture/bin/configinit.sh +++ b/tools/testing/selftests/rcutorture/bin/configinit.sh @@ -1,4 +1,5 @@ #!/bin/bash +# SPDX-License-Identifier: GPL-2.0+ # # Usage: configinit.sh config-spec-file build-output-dir results-dir # @@ -14,23 +15,9 @@ # for example, "O=/tmp/foo". If this argument is omitted, the .config # file will be generated directly in the current directory. # -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, you can access it online at -# http://www.gnu.org/licenses/gpl-2.0.html. -# # Copyright (C) IBM Corporation, 2013 # -# Authors: Paul E. McKenney <paulmck@linux.vnet.ibm.com> +# Authors: Paul E. McKenney <paulmck@linux.ibm.com> T=${TMPDIR-/tmp}/configinit.sh.$$ trap 'rm -rf $T' 0 diff --git a/tools/testing/selftests/rcutorture/bin/cpus2use.sh b/tools/testing/selftests/rcutorture/bin/cpus2use.sh index bb99cde3f5f9..ff7102212703 100755 --- a/tools/testing/selftests/rcutorture/bin/cpus2use.sh +++ b/tools/testing/selftests/rcutorture/bin/cpus2use.sh @@ -1,26 +1,13 @@ #!/bin/bash +# SPDX-License-Identifier: GPL-2.0+ # # Get an estimate of how CPU-hoggy to be. # # Usage: cpus2use.sh # -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, you can access it online at -# http://www.gnu.org/licenses/gpl-2.0.html. -# # Copyright (C) IBM Corporation, 2013 # -# Authors: Paul E. McKenney <paulmck@linux.vnet.ibm.com> +# Authors: Paul E. McKenney <paulmck@linux.ibm.com> ncpus=`grep '^processor' /proc/cpuinfo | wc -l` idlecpus=`mpstat | tail -1 | \ diff --git a/tools/testing/selftests/rcutorture/bin/functions.sh b/tools/testing/selftests/rcutorture/bin/functions.sh index 65f6655026f0..6bcb8b5b2ff2 100644 --- a/tools/testing/selftests/rcutorture/bin/functions.sh +++ b/tools/testing/selftests/rcutorture/bin/functions.sh @@ -1,24 +1,11 @@ #!/bin/bash +# SPDX-License-Identifier: GPL-2.0+ # # Shell functions for the rest of the scripts. # -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, you can access it online at -# http://www.gnu.org/licenses/gpl-2.0.html. -# # Copyright (C) IBM Corporation, 2013 # -# Authors: Paul E. McKenney <paulmck@linux.vnet.ibm.com> +# Authors: Paul E. McKenney <paulmck@linux.ibm.com> # bootparam_hotplug_cpu bootparam-string # diff --git a/tools/testing/selftests/rcutorture/bin/jitter.sh b/tools/testing/selftests/rcutorture/bin/jitter.sh index 3633828375e3..435b60933985 100755 --- a/tools/testing/selftests/rcutorture/bin/jitter.sh +++ b/tools/testing/selftests/rcutorture/bin/jitter.sh @@ -1,4 +1,5 @@ #!/bin/bash +# SPDX-License-Identifier: GPL-2.0+ # # Alternate sleeping and spinning on randomly selected CPUs. The purpose # of this script is to inflict random OS jitter on a concurrently running @@ -11,23 +12,9 @@ # sleepmax: Maximum microseconds to sleep, defaults to one second. # spinmax: Maximum microseconds to spin, defaults to one millisecond. # -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, you can access it online at -# http://www.gnu.org/licenses/gpl-2.0.html. -# # Copyright (C) IBM Corporation, 2016 # -# Authors: Paul E. McKenney <paulmck@linux.vnet.ibm.com> +# Authors: Paul E. McKenney <paulmck@linux.ibm.com> me=$(($1 * 1000)) duration=$2 diff --git a/tools/testing/selftests/rcutorture/bin/kvm-build.sh b/tools/testing/selftests/rcutorture/bin/kvm-build.sh index 9115fcdb5617..c27a0bbb9c02 100755 --- a/tools/testing/selftests/rcutorture/bin/kvm-build.sh +++ b/tools/testing/selftests/rcutorture/bin/kvm-build.sh @@ -1,26 +1,13 @@ #!/bin/bash +# SPDX-License-Identifier: GPL-2.0+ # # Build a kvm-ready Linux kernel from the tree in the current directory. # # Usage: kvm-build.sh config-template build-dir resdir # -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, you can access it online at -# http://www.gnu.org/licenses/gpl-2.0.html. -# # Copyright (C) IBM Corporation, 2011 # -# Authors: Paul E. McKenney <paulmck@linux.vnet.ibm.com> +# Authors: Paul E. McKenney <paulmck@linux.ibm.com> config_template=${1} if test -z "$config_template" -o ! -f "$config_template" -o ! -r "$config_template" diff --git a/tools/testing/selftests/rcutorture/bin/kvm-find-errors.sh b/tools/testing/selftests/rcutorture/bin/kvm-find-errors.sh index 98f650c9bf54..8426fe1f15ee 100755 --- a/tools/testing/selftests/rcutorture/bin/kvm-find-errors.sh +++ b/tools/testing/selftests/rcutorture/bin/kvm-find-errors.sh @@ -1,4 +1,5 @@ #!/bin/sh +# SPDX-License-Identifier: GPL-2.0+ # # Invoke a text editor on all console.log files for all runs with diagnostics, # that is, on all such files having a console.log.diags counterpart. @@ -10,6 +11,10 @@ # # The "directory" above should end with the date/time directory, for example, # "tools/testing/selftests/rcutorture/res/2018.02.25-14:27:27". +# +# Copyright (C) IBM Corporation, 2018 +# +# Author: Paul E. McKenney <paulmck@linux.ibm.com> rundir="${1}" if test -z "$rundir" -o ! -d "$rundir" diff --git a/tools/testing/selftests/rcutorture/bin/kvm-recheck-lock.sh b/tools/testing/selftests/rcutorture/bin/kvm-recheck-lock.sh index 2de92f43ee8c..f3a7a5e2b89d 100755 --- a/tools/testing/selftests/rcutorture/bin/kvm-recheck-lock.sh +++ b/tools/testing/selftests/rcutorture/bin/kvm-recheck-lock.sh @@ -1,26 +1,13 @@ #!/bin/bash +# SPDX-License-Identifier: GPL-2.0+ # # Analyze a given results directory for locktorture progress. # # Usage: kvm-recheck-lock.sh resdir # -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, you can access it online at -# http://www.gnu.org/licenses/gpl-2.0.html. -# # Copyright (C) IBM Corporation, 2014 # -# Authors: Paul E. McKenney <paulmck@linux.vnet.ibm.com> +# Authors: Paul E. McKenney <paulmck@linux.ibm.com> i="$1" if test -d "$i" -a -r "$i" diff --git a/tools/testing/selftests/rcutorture/bin/kvm-recheck-rcu.sh b/tools/testing/selftests/rcutorture/bin/kvm-recheck-rcu.sh index 0fa8a61ccb7b..2a7f3f4756a7 100755 --- a/tools/testing/selftests/rcutorture/bin/kvm-recheck-rcu.sh +++ b/tools/testing/selftests/rcutorture/bin/kvm-recheck-rcu.sh @@ -1,26 +1,13 @@ #!/bin/bash +# SPDX-License-Identifier: GPL-2.0+ # # Analyze a given results directory for rcutorture progress. # # Usage: kvm-recheck-rcu.sh resdir # -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, you can access it online at -# http://www.gnu.org/licenses/gpl-2.0.html. -# # Copyright (C) IBM Corporation, 2014 # -# Authors: Paul E. McKenney <paulmck@linux.vnet.ibm.com> +# Authors: Paul E. McKenney <paulmck@linux.ibm.com> i="$1" if test -d "$i" -a -r "$i" diff --git a/tools/testing/selftests/rcutorture/bin/kvm-recheck-rcuperf-ftrace.sh b/tools/testing/selftests/rcutorture/bin/kvm-recheck-rcuperf-ftrace.sh index 8948f7926b21..7d3c2be66c64 100755 --- a/tools/testing/selftests/rcutorture/bin/kvm-recheck-rcuperf-ftrace.sh +++ b/tools/testing/selftests/rcutorture/bin/kvm-recheck-rcuperf-ftrace.sh @@ -1,4 +1,5 @@ #!/bin/bash +# SPDX-License-Identifier: GPL-2.0+ # # Analyze a given results directory for rcuperf performance measurements, # looking for ftrace data. Exits with 0 if data was found, analyzed, and @@ -7,23 +8,9 @@ # # Usage: kvm-recheck-rcuperf-ftrace.sh resdir # -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, you can access it online at -# http://www.gnu.org/licenses/gpl-2.0.html. -# # Copyright (C) IBM Corporation, 2016 # -# Authors: Paul E. McKenney <paulmck@linux.vnet.ibm.com> +# Authors: Paul E. McKenney <paulmck@linux.ibm.com> i="$1" . functions.sh diff --git a/tools/testing/selftests/rcutorture/bin/kvm-recheck-rcuperf.sh b/tools/testing/selftests/rcutorture/bin/kvm-recheck-rcuperf.sh index ccebf772fa1e..db0375a57f28 100755 --- a/tools/testing/selftests/rcutorture/bin/kvm-recheck-rcuperf.sh +++ b/tools/testing/selftests/rcutorture/bin/kvm-recheck-rcuperf.sh @@ -1,26 +1,13 @@ #!/bin/bash +# SPDX-License-Identifier: GPL-2.0+ # # Analyze a given results directory for rcuperf performance measurements. # # Usage: kvm-recheck-rcuperf.sh resdir # -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, you can access it online at -# http://www.gnu.org/licenses/gpl-2.0.html. -# # Copyright (C) IBM Corporation, 2016 # -# Authors: Paul E. McKenney <paulmck@linux.vnet.ibm.com> +# Authors: Paul E. McKenney <paulmck@linux.ibm.com> i="$1" if test -d "$i" -a -r "$i" diff --git a/tools/testing/selftests/rcutorture/bin/kvm-recheck.sh b/tools/testing/selftests/rcutorture/bin/kvm-recheck.sh index c9bab57a77eb..2adde6aaafdb 100755 --- a/tools/testing/selftests/rcutorture/bin/kvm-recheck.sh +++ b/tools/testing/selftests/rcutorture/bin/kvm-recheck.sh @@ -1,4 +1,5 @@ #!/bin/bash +# SPDX-License-Identifier: GPL-2.0+ # # Given the results directories for previous KVM-based torture runs, # check the build and console output for errors. Given a directory @@ -6,23 +7,9 @@ # # Usage: kvm-recheck.sh resdir ... # -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, you can access it online at -# http://www.gnu.org/licenses/gpl-2.0.html. -# # Copyright (C) IBM Corporation, 2011 # -# Authors: Paul E. McKenney <paulmck@linux.vnet.ibm.com> +# Authors: Paul E. McKenney <paulmck@linux.ibm.com> PATH=`pwd`/tools/testing/selftests/rcutorture/bin:$PATH; export PATH . functions.sh diff --git a/tools/testing/selftests/rcutorture/bin/kvm-test-1-run.sh b/tools/testing/selftests/rcutorture/bin/kvm-test-1-run.sh index 58ca758a5786..0eb1ec16d78a 100755 --- a/tools/testing/selftests/rcutorture/bin/kvm-test-1-run.sh +++ b/tools/testing/selftests/rcutorture/bin/kvm-test-1-run.sh @@ -1,4 +1,5 @@ #!/bin/bash +# SPDX-License-Identifier: GPL-2.0+ # # Run a kvm-based test of the specified tree on the specified configs. # Fully automated run and error checking, no graphics console. @@ -20,23 +21,9 @@ # # More sophisticated argument parsing is clearly needed. # -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, you can access it online at -# http://www.gnu.org/licenses/gpl-2.0.html. -# # Copyright (C) IBM Corporation, 2011 # -# Authors: Paul E. McKenney <paulmck@linux.vnet.ibm.com> +# Authors: Paul E. McKenney <paulmck@linux.ibm.com> T=${TMPDIR-/tmp}/kvm-test-1-run.sh.$$ trap 'rm -rf $T' 0 diff --git a/tools/testing/selftests/rcutorture/bin/kvm.sh b/tools/testing/selftests/rcutorture/bin/kvm.sh index 19864f1cb27a..8f1e337b9b54 100755 --- a/tools/testing/selftests/rcutorture/bin/kvm.sh +++ b/tools/testing/selftests/rcutorture/bin/kvm.sh @@ -1,4 +1,5 @@ #!/bin/bash +# SPDX-License-Identifier: GPL-2.0+ # # Run a series of tests under KVM. By default, this series is specified # by the relevant CFLIST file, but can be overridden by the --configs @@ -6,23 +7,9 @@ # # Usage: kvm.sh [ options ] # -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, you can access it online at -# http://www.gnu.org/licenses/gpl-2.0.html. -# # Copyright (C) IBM Corporation, 2011 # -# Authors: Paul E. McKenney <paulmck@linux.vnet.ibm.com> +# Authors: Paul E. McKenney <paulmck@linux.ibm.com> scriptname=$0 args="$*" diff --git a/tools/testing/selftests/rcutorture/bin/mkinitrd.sh b/tools/testing/selftests/rcutorture/bin/mkinitrd.sh index 83552bb007b4..6fa9bd1ddc09 100755 --- a/tools/testing/selftests/rcutorture/bin/mkinitrd.sh +++ b/tools/testing/selftests/rcutorture/bin/mkinitrd.sh @@ -1,21 +1,8 @@ #!/bin/bash +# SPDX-License-Identifier: GPL-2.0+ # # Create an initrd directory if one does not already exist. # -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, you can access it online at -# http://www.gnu.org/licenses/gpl-2.0.html. -# # Copyright (C) IBM Corporation, 2013 # # Author: Connor Shu <Connor.Shu@ibm.com> diff --git a/tools/testing/selftests/rcutorture/bin/parse-build.sh b/tools/testing/selftests/rcutorture/bin/parse-build.sh index 24fe5f822b28..0701b3bf6ade 100755 --- a/tools/testing/selftests/rcutorture/bin/parse-build.sh +++ b/tools/testing/selftests/rcutorture/bin/parse-build.sh @@ -1,4 +1,5 @@ #!/bin/bash +# SPDX-License-Identifier: GPL-2.0+ # # Check the build output from an rcutorture run for goodness. # The "file" is a pathname on the local system, and "title" is @@ -8,23 +9,9 @@ # # Usage: parse-build.sh file title # -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, you can access it online at -# http://www.gnu.org/licenses/gpl-2.0.html. -# # Copyright (C) IBM Corporation, 2011 # -# Authors: Paul E. McKenney <paulmck@linux.vnet.ibm.com> +# Authors: Paul E. McKenney <paulmck@linux.ibm.com> F=$1 title=$2 diff --git a/tools/testing/selftests/rcutorture/bin/parse-console.sh b/tools/testing/selftests/rcutorture/bin/parse-console.sh index 84933f6aed77..4508373a922f 100755 --- a/tools/testing/selftests/rcutorture/bin/parse-console.sh +++ b/tools/testing/selftests/rcutorture/bin/parse-console.sh @@ -1,4 +1,5 @@ #!/bin/bash +# SPDX-License-Identifier: GPL-2.0+ # # Check the console output from an rcutorture run for oopses. # The "file" is a pathname on the local system, and "title" is @@ -6,23 +7,9 @@ # # Usage: parse-console.sh file title # -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, you can access it online at -# http://www.gnu.org/licenses/gpl-2.0.html. -# # Copyright (C) IBM Corporation, 2011 # -# Authors: Paul E. McKenney <paulmck@linux.vnet.ibm.com> +# Authors: Paul E. McKenney <paulmck@linux.ibm.com> T=${TMPDIR-/tmp}/parse-console.sh.$$ file="$1" diff --git a/tools/testing/selftests/rcutorture/configs/lock/ver_functions.sh b/tools/testing/selftests/rcutorture/configs/lock/ver_functions.sh index 80eb646e1319..d3e4b2971f92 100644 --- a/tools/testing/selftests/rcutorture/configs/lock/ver_functions.sh +++ b/tools/testing/selftests/rcutorture/configs/lock/ver_functions.sh @@ -1,24 +1,11 @@ #!/bin/bash +# SPDX-License-Identifier: GPL-2.0+ # # Kernel-version-dependent shell functions for the rest of the scripts. # -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, you can access it online at -# http://www.gnu.org/licenses/gpl-2.0.html. -# # Copyright (C) IBM Corporation, 2014 # -# Authors: Paul E. McKenney <paulmck@linux.vnet.ibm.com> +# Authors: Paul E. McKenney <paulmck@linux.ibm.com> # locktorture_param_onoff bootparam-string config-file # diff --git a/tools/testing/selftests/rcutorture/configs/rcu/ver_functions.sh b/tools/testing/selftests/rcutorture/configs/rcu/ver_functions.sh index 7bab8246392b..effa415f9b92 100644 --- a/tools/testing/selftests/rcutorture/configs/rcu/ver_functions.sh +++ b/tools/testing/selftests/rcutorture/configs/rcu/ver_functions.sh @@ -1,24 +1,11 @@ #!/bin/bash +# SPDX-License-Identifier: GPL-2.0+ # # Kernel-version-dependent shell functions for the rest of the scripts. # -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, you can access it online at -# http://www.gnu.org/licenses/gpl-2.0.html. -# # Copyright (C) IBM Corporation, 2013 # -# Authors: Paul E. McKenney <paulmck@linux.vnet.ibm.com> +# Authors: Paul E. McKenney <paulmck@linux.ibm.com> # rcutorture_param_n_barrier_cbs bootparam-string # diff --git a/tools/testing/selftests/rcutorture/configs/rcuperf/ver_functions.sh b/tools/testing/selftests/rcutorture/configs/rcuperf/ver_functions.sh index d36b8fd6f0fc..777d5b0c190f 100644 --- a/tools/testing/selftests/rcutorture/configs/rcuperf/ver_functions.sh +++ b/tools/testing/selftests/rcutorture/configs/rcuperf/ver_functions.sh @@ -1,24 +1,11 @@ #!/bin/bash +# SPDX-License-Identifier: GPL-2.0+ # # Torture-suite-dependent shell functions for the rest of the scripts. # -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, you can access it online at -# http://www.gnu.org/licenses/gpl-2.0.html. -# # Copyright (C) IBM Corporation, 2015 # -# Authors: Paul E. McKenney <paulmck@linux.vnet.ibm.com> +# Authors: Paul E. McKenney <paulmck@linux.ibm.com> # per_version_boot_params bootparam-string config-file seconds # |