diff options
-rw-r--r-- | arch/mips/pci/pci-lantiq.c | 28 |
1 files changed, 13 insertions, 15 deletions
diff --git a/arch/mips/pci/pci-lantiq.c b/arch/mips/pci/pci-lantiq.c index 1ca42f482130..8d16cd021f60 100644 --- a/arch/mips/pci/pci-lantiq.c +++ b/arch/mips/pci/pci-lantiq.c @@ -9,11 +9,11 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/delay.h> +#include <linux/gpio/consumer.h> #include <linux/mm.h> #include <linux/vmalloc.h> #include <linux/clk.h> #include <linux/of_platform.h> -#include <linux/of_gpio.h> #include <linux/of_irq.h> #include <linux/of_pci.h> @@ -62,7 +62,7 @@ __iomem void *ltq_pci_mapped_cfg; static __iomem void *ltq_pci_membase; -static int reset_gpio; +static struct gpio_desc *reset_gpio; static struct clk *clk_pci, *clk_external; static struct resource pci_io_resource; static struct resource pci_mem_resource; @@ -95,6 +95,7 @@ static int ltq_pci_startup(struct platform_device *pdev) struct device_node *node = pdev->dev.of_node; const __be32 *req_mask, *bus_clk; u32 temp_buffer; + int error; /* get our clocks */ clk_pci = clk_get(&pdev->dev, NULL); @@ -123,17 +124,14 @@ static int ltq_pci_startup(struct platform_device *pdev) clk_disable(clk_external); /* setup reset gpio used by pci */ - reset_gpio = of_get_named_gpio(node, "gpio-reset", 0); - if (gpio_is_valid(reset_gpio)) { - int ret = devm_gpio_request(&pdev->dev, - reset_gpio, "pci-reset"); - if (ret) { - dev_err(&pdev->dev, - "failed to request gpio %d\n", reset_gpio); - return ret; - } - gpio_direction_output(reset_gpio, 1); + reset_gpio = devm_gpiod_get_optional(&pdev->dev, "reset", + GPIOD_OUT_LOW); + error = PTR_ERR_OR_ZERO(reset_gpio); + if (error) { + dev_err(&pdev->dev, "failed to request gpio: %d\n", error); + return error; } + gpiod_set_consumer_name(reset_gpio, "pci_reset"); /* enable auto-switching between PCI and EBU */ ltq_pci_w32(0xa, PCI_CR_CLK_CTRL); @@ -195,11 +193,11 @@ static int ltq_pci_startup(struct platform_device *pdev) ltq_ebu_w32(ltq_ebu_r32(LTQ_EBU_PCC_IEN) | 0x10, LTQ_EBU_PCC_IEN); /* toggle reset pin */ - if (gpio_is_valid(reset_gpio)) { - __gpio_set_value(reset_gpio, 0); + if (reset_gpio) { + gpiod_set_value_cansleep(reset_gpio, 1); wmb(); mdelay(1); - __gpio_set_value(reset_gpio, 1); + gpiod_set_value_cansleep(reset_gpio, 0); } return 0; } |