summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--arch/ia64/include/asm/perfmon.h2
-rw-r--r--drivers/atm/firestream.c2
-rw-r--r--drivers/block/smart1,2.h2
-rw-r--r--drivers/net/wireless/ipw2x00/ipw2100.c2
-rw-r--r--drivers/scsi/megaraid.c4
-rw-r--r--drivers/scsi/megaraid/megaraid_sas_base.c2
6 files changed, 7 insertions, 7 deletions
diff --git a/arch/ia64/include/asm/perfmon.h b/arch/ia64/include/asm/perfmon.h
index 7f3333dd00e4..d551183fee90 100644
--- a/arch/ia64/include/asm/perfmon.h
+++ b/arch/ia64/include/asm/perfmon.h
@@ -7,7 +7,7 @@
#define _ASM_IA64_PERFMON_H
/*
- * perfmon comamnds supported on all CPU models
+ * perfmon commands supported on all CPU models
*/
#define PFM_WRITE_PMCS 0x01
#define PFM_WRITE_PMDS 0x02
diff --git a/drivers/atm/firestream.c b/drivers/atm/firestream.c
index 7d912baf01d4..049650d42c88 100644
--- a/drivers/atm/firestream.c
+++ b/drivers/atm/firestream.c
@@ -1031,7 +1031,7 @@ static int fs_open(struct atm_vcc *atm_vcc)
/* We now use the "submit_command" function to submit commands to
the firestream. There is a define up near the definition of
that routine that switches this routine between immediate write
- to the immediate comamnd registers and queuing the commands in
+ to the immediate command registers and queuing the commands in
the HPTXQ for execution. This last technique might be more
efficient if we know we're going to submit a whole lot of
commands in one go, but this driver is not setup to be able to
diff --git a/drivers/block/smart1,2.h b/drivers/block/smart1,2.h
index a0b403a6b4ed..e5565fbaeb30 100644
--- a/drivers/block/smart1,2.h
+++ b/drivers/block/smart1,2.h
@@ -95,7 +95,7 @@ static unsigned long smart4_completed(ctlr_info_t *h)
/*
* This hardware returns interrupt pending at a different place and
* it does not tell us if the fifo is empty, we will have check
- * that by getting a 0 back from the comamnd_completed call.
+ * that by getting a 0 back from the command_completed call.
*/
static unsigned long smart4_intr_pending(ctlr_info_t *h)
{
diff --git a/drivers/net/wireless/ipw2x00/ipw2100.c b/drivers/net/wireless/ipw2x00/ipw2100.c
index 61915f371416..da60faee74fc 100644
--- a/drivers/net/wireless/ipw2x00/ipw2100.c
+++ b/drivers/net/wireless/ipw2x00/ipw2100.c
@@ -1397,7 +1397,7 @@ static int ipw2100_power_cycle_adapter(struct ipw2100_priv *priv)
}
/*
- * Send the CARD_DISABLE_PHY_OFF comamnd to the card to disable it
+ * Send the CARD_DISABLE_PHY_OFF command to the card to disable it
*
* After disabling, if the card was associated, a STATUS_ASSN_LOST will be sent.
*
diff --git a/drivers/scsi/megaraid.c b/drivers/scsi/megaraid.c
index 9aa048525eb2..c212694a9714 100644
--- a/drivers/scsi/megaraid.c
+++ b/drivers/scsi/megaraid.c
@@ -1412,7 +1412,7 @@ megaraid_isr_memmapped(int irq, void *devp)
* @nstatus - number of completed commands
* @status - status of the last command completed
*
- * Complete the comamnds and call the scsi mid-layer callback hooks.
+ * Complete the commands and call the scsi mid-layer callback hooks.
*/
static void
mega_cmd_done(adapter_t *adapter, u8 completed[], int nstatus, int status)
@@ -4296,7 +4296,7 @@ mega_support_cluster(adapter_t *adapter)
* @adapter - pointer to our soft state
* @dma_handle - DMA address of the buffer
*
- * Issue internal comamnds while interrupts are available.
+ * Issue internal commands while interrupts are available.
* We only issue direct mailbox commands from within the driver. ioctl()
* interface using these routines can issue passthru commands.
*/
diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c
index 5d6d07bd1cd0..a18ba43af73e 100644
--- a/drivers/scsi/megaraid/megaraid_sas_base.c
+++ b/drivers/scsi/megaraid/megaraid_sas_base.c
@@ -877,7 +877,7 @@ megasas_issue_blocked_cmd(struct megasas_instance *instance,
* @instance: Adapter soft state
* @cmd_to_abort: Previously issued cmd to be aborted
*
- * MFI firmware can abort previously issued AEN comamnd (automatic event
+ * MFI firmware can abort previously issued AEN command (automatic event
* notification). The megasas_issue_blocked_abort_cmd() issues such abort
* cmd and waits for return status.
* Max wait time is MEGASAS_INTERNAL_CMD_WAIT_TIME secs