diff options
-rw-r--r-- | Documentation/devicetree/bindings/i2c/i2c-mux-pinctrl.txt | 93 | ||||
-rw-r--r-- | Documentation/devicetree/bindings/i2c/i2c-mux-pinctrl.yaml | 103 |
2 files changed, 103 insertions, 93 deletions
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-pinctrl.txt b/Documentation/devicetree/bindings/i2c/i2c-mux-pinctrl.txt deleted file mode 100644 index 997a287ed3f6..000000000000 --- a/Documentation/devicetree/bindings/i2c/i2c-mux-pinctrl.txt +++ /dev/null @@ -1,93 +0,0 @@ -Pinctrl-based I2C Bus Mux - -This binding describes an I2C bus multiplexer that uses pin multiplexing to -route the I2C signals, and represents the pin multiplexing configuration -using the pinctrl device tree bindings. - - +-----+ +-----+ - | dev | | dev | - +------------------------+ +-----+ +-----+ - | SoC | | | - | /----|------+--------+ - | +---+ +------+ | child bus A, on first set of pins - | |I2C|---|Pinmux| | - | +---+ +------+ | child bus B, on second set of pins - | \----|------+--------+--------+ - | | | | | - +------------------------+ +-----+ +-----+ +-----+ - | dev | | dev | | dev | - +-----+ +-----+ +-----+ - -Required properties: -- compatible: i2c-mux-pinctrl -- i2c-parent: The phandle of the I2C bus that this multiplexer's master-side - port is connected to. - -Also required are: - -* Standard pinctrl properties that specify the pin mux state for each child - bus. See ../pinctrl/pinctrl-bindings.txt. - -* Standard I2C mux properties. See i2c-mux.yaml in this directory. - -* I2C child bus nodes. See i2c-mux.yaml in this directory. - -For each named state defined in the pinctrl-names property, an I2C child bus -will be created. I2C child bus numbers are assigned based on the index into -the pinctrl-names property. - -The only exception is that no bus will be created for a state named "idle". If -such a state is defined, it must be the last entry in pinctrl-names. For -example: - - pinctrl-names = "ddc", "pta", "idle" -> ddc = bus 0, pta = bus 1 - pinctrl-names = "ddc", "idle", "pta" -> Invalid ("idle" not last) - pinctrl-names = "idle", "ddc", "pta" -> Invalid ("idle" not last) - -Whenever an access is made to a device on a child bus, the relevant pinctrl -state will be programmed into hardware. - -If an idle state is defined, whenever an access is not being made to a device -on a child bus, the idle pinctrl state will be programmed into hardware. - -If an idle state is not defined, the most recently used pinctrl state will be -left programmed into hardware whenever no access is being made of a device on -a child bus. - -Example: - - i2cmux { - compatible = "i2c-mux-pinctrl"; - #address-cells = <1>; - #size-cells = <0>; - - i2c-parent = <&i2c1>; - - pinctrl-names = "ddc", "pta", "idle"; - pinctrl-0 = <&state_i2cmux_ddc>; - pinctrl-1 = <&state_i2cmux_pta>; - pinctrl-2 = <&state_i2cmux_idle>; - - i2c@0 { - reg = <0>; - #address-cells = <1>; - #size-cells = <0>; - - eeprom { - compatible = "eeprom"; - reg = <0x50>; - }; - }; - - i2c@1 { - reg = <1>; - #address-cells = <1>; - #size-cells = <0>; - - eeprom { - compatible = "eeprom"; - reg = <0x50>; - }; - }; - }; - diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-pinctrl.yaml b/Documentation/devicetree/bindings/i2c/i2c-mux-pinctrl.yaml new file mode 100644 index 000000000000..2e3d555eb96c --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-mux-pinctrl.yaml @@ -0,0 +1,103 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/i2c-mux-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Pinctrl-based I2C Bus Mux + +maintainers: + - Wolfram Sang <wsa@kernel.org> + +description: | + This binding describes an I2C bus multiplexer that uses pin multiplexing to route the I2C + signals, and represents the pin multiplexing configuration using the pinctrl device tree + bindings. + + +-----+ +-----+ + | dev | | dev | + +------------------------+ +-----+ +-----+ + | SoC | | | + | /----|------+--------+ + | +---+ +------+ | child bus A, on first set of pins + | |I2C|---|Pinmux| | + | +---+ +------+ | child bus B, on second set of pins + | \----|------+--------+--------+ + | | | | | + +------------------------+ +-----+ +-----+ +-----+ + | dev | | dev | | dev | + +-----+ +-----+ +-----+ + + For each named state defined in the pinctrl-names property, an I2C child bus will be created. + I2C child bus numbers are assigned based on the index into the pinctrl-names property. + + The only exception is that no bus will be created for a state named "idle". If such a state is + defined, it must be the last entry in pinctrl-names. For example: + + pinctrl-names = "ddc", "pta", "idle" -> ddc = bus 0, pta = bus 1 + pinctrl-names = "ddc", "idle", "pta" -> Invalid ("idle" not last) + pinctrl-names = "idle", "ddc", "pta" -> Invalid ("idle" not last) + + Whenever an access is made to a device on a child bus, the relevant pinctrl state will be + programmed into hardware. + + If an idle state is defined, whenever an access is not being made to a device on a child bus, + the idle pinctrl state will be programmed into hardware. + + If an idle state is not defined, the most recently used pinctrl state will be left programmed + into hardware whenever no access is being made of a device on a child bus. + +properties: + compatible: + const: i2c-mux-pinctrl + + i2c-parent: + $ref: /schemas/types.yaml#/definitions/phandle + description: The phandle of the I2C bus that this multiplexer's master-side port is connected + to. + +allOf: + - $ref: i2c-mux.yaml + +unevaluatedProperties: false + +required: + - compatible + - i2c-parent + +examples: + - | + i2cmux { + compatible = "i2c-mux-pinctrl"; + #address-cells = <1>; + #size-cells = <0>; + + i2c-parent = <&i2c1>; + + pinctrl-names = "ddc", "pta", "idle"; + pinctrl-0 = <&state_i2cmux_ddc>; + pinctrl-1 = <&state_i2cmux_pta>; + pinctrl-2 = <&state_i2cmux_idle>; + + i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + }; + }; + + i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + }; + }; + }; |