summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--drivers/net/phy/phy.c7
-rw-r--r--include/linux/phy.h22
2 files changed, 2 insertions, 27 deletions
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index 083977d2f187..627e66ab60eb 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -46,9 +46,7 @@ static const char *phy_state_to_str(enum phy_state st)
{
switch (st) {
PHY_STATE_STR(DOWN)
- PHY_STATE_STR(STARTING)
PHY_STATE_STR(READY)
- PHY_STATE_STR(PENDING)
PHY_STATE_STR(UP)
PHY_STATE_STR(RUNNING)
PHY_STATE_STR(NOLINK)
@@ -852,9 +850,6 @@ void phy_start(struct phy_device *phydev)
mutex_lock(&phydev->lock);
switch (phydev->state) {
- case PHY_STARTING:
- phydev->state = PHY_PENDING;
- break;
case PHY_READY:
phydev->state = PHY_UP;
break;
@@ -902,9 +897,7 @@ void phy_state_machine(struct work_struct *work)
switch (phydev->state) {
case PHY_DOWN:
- case PHY_STARTING:
case PHY_READY:
- case PHY_PENDING:
break;
case PHY_UP:
needs_aneg = true;
diff --git a/include/linux/phy.h b/include/linux/phy.h
index 03005c65e02d..a5bcb4aaa48e 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -270,29 +270,13 @@ struct phy_device *mdiobus_scan(struct mii_bus *bus, int addr);
* DOWN: PHY device and driver are not ready for anything. probe
* should be called if and only if the PHY is in this state,
* given that the PHY device exists.
- * - PHY driver probe function will, depending on the PHY, set
- * the state to STARTING or READY
- *
- * STARTING: PHY device is coming up, and the ethernet driver is
- * not ready. PHY drivers may set this in the probe function.
- * If they do, they are responsible for making sure the state is
- * eventually set to indicate whether the PHY is UP or READY,
- * depending on the state when the PHY is done starting up.
- * - PHY driver will set the state to READY
- * - start will set the state to PENDING
+ * - PHY driver probe function will set the state to READY
*
* READY: PHY is ready to send and receive packets, but the
* controller is not. By default, PHYs which do not implement
- * probe will be set to this state by phy_probe(). If the PHY
- * driver knows the PHY is ready, and the PHY state is STARTING,
- * then it sets this STATE.
+ * probe will be set to this state by phy_probe().
* - start will set the state to UP
*
- * PENDING: PHY device is coming up, but the ethernet driver is
- * ready. phy_start will set this state if the PHY state is
- * STARTING.
- * - PHY driver will set the state to UP when the PHY is ready
- *
* UP: The PHY and attached device are ready to do work.
* Interrupts should be started here.
* - timer moves to NOLINK or RUNNING
@@ -329,9 +313,7 @@ struct phy_device *mdiobus_scan(struct mii_bus *bus, int addr);
*/
enum phy_state {
PHY_DOWN = 0,
- PHY_STARTING,
PHY_READY,
- PHY_PENDING,
PHY_UP,
PHY_RUNNING,
PHY_NOLINK,