diff options
-rw-r--r-- | drivers/usb/host/xhci-mem.c | 9 |
1 files changed, 5 insertions, 4 deletions
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index 60fc6720007f..c089668308ad 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -158,7 +158,7 @@ static void xhci_link_rings(struct xhci_hcd *xhci, struct xhci_ring *ring, * * The radix tree maps the upper portion of the TRB DMA address to a ring * segment that has the same upper portion of DMA addresses. For example, say I - * have segments of size 1KB, that are always 64-byte aligned. A segment may + * have segments of size 1KB, that are always 1KB aligned. A segment may * start at 0x10c91000 and end at 0x10c913f0. If I use the upper 10 bits, the * key to the stream ID is 0x43244. I can use the DMA address of the TRB to * pass the radix tree a key to get the right stream ID: @@ -2375,11 +2375,12 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) /* * Initialize the ring segment pool. The ring must be a contiguous * structure comprised of TRBs. The TRBs must be 16 byte aligned, - * however, the command ring segment needs 64-byte aligned segments, - * so we pick the greater alignment need. + * however, the command ring segment needs 64-byte aligned segments + * and our use of dma addresses in the trb_address_map radix tree needs + * TRB_SEGMENT_SIZE alignment, so we pick the greater alignment need. */ xhci->segment_pool = dma_pool_create("xHCI ring segments", dev, - TRB_SEGMENT_SIZE, 64, xhci->page_size); + TRB_SEGMENT_SIZE, TRB_SEGMENT_SIZE, xhci->page_size); /* See Table 46 and Note on Figure 55 */ xhci->device_pool = dma_pool_create("xHCI input/output contexts", dev, |