diff options
| -rw-r--r-- | drivers/usb/serial/cp210x.c | 84 |
1 files changed, 78 insertions, 6 deletions
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index ee595d1bea0a..fcb812bc832c 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -252,9 +252,11 @@ struct cp210x_serial_private { u8 gpio_input; #endif u8 partnum; + u32 fw_version; speed_t min_speed; speed_t max_speed; bool use_actual_rate; + bool no_flow_control; }; enum cp210x_event_state { @@ -398,6 +400,7 @@ struct cp210x_special_chars { /* CP210X_VENDOR_SPECIFIC values */ #define CP210X_READ_2NCONFIG 0x000E +#define CP210X_GET_FW_VER_2N 0x0010 #define CP210X_READ_LATCH 0x00C2 #define CP210X_GET_PARTNUM 0x370B #define CP210X_GET_PORTCONFIG 0x370C @@ -537,6 +540,12 @@ struct cp210x_single_port_config { #define CP210X_2NCONFIG_GPIO_RSTLATCH_IDX 587 #define CP210X_2NCONFIG_GPIO_CONTROL_IDX 600 +/* CP2102N QFN20 port configuration values */ +#define CP2102N_QFN20_GPIO2_TXLED_MODE BIT(2) +#define CP2102N_QFN20_GPIO3_RXLED_MODE BIT(3) +#define CP2102N_QFN20_GPIO1_RS485_MODE BIT(4) +#define CP2102N_QFN20_GPIO0_CLK_MODE BIT(6) + /* CP210X_VENDOR_SPECIFIC, CP210X_WRITE_LATCH call writes these 0x2 bytes. */ struct cp210x_gpio_write { u8 mask; @@ -1122,6 +1131,7 @@ static bool cp210x_termios_change(const struct ktermios *a, const struct ktermio static void cp210x_set_flow_control(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old_termios) { + struct cp210x_serial_private *priv = usb_get_serial_data(port->serial); struct cp210x_port_private *port_priv = usb_get_serial_port_data(port); struct cp210x_special_chars chars; struct cp210x_flow_ctl flow_ctl; @@ -1129,6 +1139,15 @@ static void cp210x_set_flow_control(struct tty_struct *tty, u32 ctl_hs; int ret; + /* + * Some CP2102N interpret ulXonLimit as ulFlowReplace (erratum + * CP2102N_E104). Report back that flow control is not supported. + */ + if (priv->no_flow_control) { + tty->termios.c_cflag &= ~CRTSCTS; + tty->termios.c_iflag &= ~(IXON | IXOFF); + } + if (old_termios && C_CRTSCTS(tty) == (old_termios->c_cflag & CRTSCTS) && I_IXON(tty) == (old_termios->c_iflag & IXON) && @@ -1185,19 +1204,20 @@ static void cp210x_set_flow_control(struct tty_struct *tty, port_priv->crtscts = false; } - if (I_IXOFF(tty)) + if (I_IXOFF(tty)) { flow_repl |= CP210X_SERIAL_AUTO_RECEIVE; - else + + flow_ctl.ulXonLimit = cpu_to_le32(128); + flow_ctl.ulXoffLimit = cpu_to_le32(128); + } else { flow_repl &= ~CP210X_SERIAL_AUTO_RECEIVE; + } if (I_IXON(tty)) flow_repl |= CP210X_SERIAL_AUTO_TRANSMIT; else flow_repl &= ~CP210X_SERIAL_AUTO_TRANSMIT; - flow_ctl.ulXonLimit = cpu_to_le32(128); - flow_ctl.ulXoffLimit = cpu_to_le32(128); - dev_dbg(&port->dev, "%s - ctrl = 0x%02x, flow = 0x%02x\n", __func__, ctl_hs, flow_repl); @@ -1733,7 +1753,19 @@ static int cp2102n_gpioconf_init(struct usb_serial *serial) priv->gpio_pushpull = (gpio_pushpull >> 3) & 0x0f; /* 0 indicates GPIO mode, 1 is alternate function */ - priv->gpio_altfunc = (gpio_ctrl >> 2) & 0x0f; + if (priv->partnum == CP210X_PARTNUM_CP2102N_QFN20) { + /* QFN20 is special... */ + if (gpio_ctrl & CP2102N_QFN20_GPIO0_CLK_MODE) /* GPIO 0 */ + priv->gpio_altfunc |= BIT(0); + if (gpio_ctrl & CP2102N_QFN20_GPIO1_RS485_MODE) /* GPIO 1 */ + priv->gpio_altfunc |= BIT(1); + if (gpio_ctrl & CP2102N_QFN20_GPIO2_TXLED_MODE) /* GPIO 2 */ + priv->gpio_altfunc |= BIT(2); + if (gpio_ctrl & CP2102N_QFN20_GPIO3_RXLED_MODE) /* GPIO 3 */ + priv->gpio_altfunc |= BIT(3); + } else { + priv->gpio_altfunc = (gpio_ctrl >> 2) & 0x0f; + } if (priv->partnum == CP210X_PARTNUM_CP2102N_QFN28) { /* @@ -1908,6 +1940,45 @@ static void cp210x_init_max_speed(struct usb_serial *serial) priv->use_actual_rate = use_actual_rate; } +static int cp210x_get_fw_version(struct usb_serial *serial, u16 value) +{ + struct cp210x_serial_private *priv = usb_get_serial_data(serial); + u8 ver[3]; + int ret; + + ret = cp210x_read_vendor_block(serial, REQTYPE_DEVICE_TO_HOST, value, + ver, sizeof(ver)); + if (ret) + return ret; + + dev_dbg(&serial->interface->dev, "%s - %d.%d.%d\n", __func__, + ver[0], ver[1], ver[2]); + + priv->fw_version = ver[0] << 16 | ver[1] << 8 | ver[2]; + + return 0; +} + +static void cp210x_determine_quirks(struct usb_serial *serial) +{ + struct cp210x_serial_private *priv = usb_get_serial_data(serial); + int ret; + + switch (priv->partnum) { + case CP210X_PARTNUM_CP2102N_QFN28: + case CP210X_PARTNUM_CP2102N_QFN24: + case CP210X_PARTNUM_CP2102N_QFN20: + ret = cp210x_get_fw_version(serial, CP210X_GET_FW_VER_2N); + if (ret) + break; + if (priv->fw_version <= 0x10004) + priv->no_flow_control = true; + break; + default: + break; + } +} + static int cp210x_attach(struct usb_serial *serial) { int result; @@ -1928,6 +1999,7 @@ static int cp210x_attach(struct usb_serial *serial) usb_set_serial_data(serial, priv); + cp210x_determine_quirks(serial); cp210x_init_max_speed(serial); result = cp210x_gpio_init(serial); |