diff options
| -rw-r--r-- | Documentation/devicetree/bindings/net/altera_tse.txt | 113 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/net/altr,tse.yaml | 168 | ||||
| -rw-r--r-- | MAINTAINERS | 7 | ||||
| -rw-r--r-- | drivers/net/ethernet/altera/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/net/ethernet/altera/altera_tse.h | 19 | ||||
| -rw-r--r-- | drivers/net/ethernet/altera/altera_tse_ethtool.c | 22 | ||||
| -rw-r--r-- | drivers/net/ethernet/altera/altera_tse_main.c | 453 | ||||
| -rw-r--r-- | drivers/net/pcs/Kconfig | 6 | ||||
| -rw-r--r-- | drivers/net/pcs/Makefile | 1 | ||||
| -rw-r--r-- | drivers/net/pcs/pcs-altera-tse.c | 175 | ||||
| -rw-r--r-- | include/linux/pcs-altera-tse.h | 17 |
11 files changed, 536 insertions, 447 deletions
diff --git a/Documentation/devicetree/bindings/net/altera_tse.txt b/Documentation/devicetree/bindings/net/altera_tse.txt deleted file mode 100644 index 1d9148ff5130..000000000000 --- a/Documentation/devicetree/bindings/net/altera_tse.txt +++ /dev/null @@ -1,113 +0,0 @@ -* Altera Triple-Speed Ethernet MAC driver (TSE) - -Required properties: -- compatible: Should be "altr,tse-1.0" for legacy SGDMA based TSE, and should - be "altr,tse-msgdma-1.0" for the preferred MSGDMA based TSE. - ALTR is supported for legacy device trees, but is deprecated. - altr should be used for all new designs. -- reg: Address and length of the register set for the device. It contains - the information of registers in the same order as described by reg-names -- reg-names: Should contain the reg names - "control_port": MAC configuration space region - "tx_csr": xDMA Tx dispatcher control and status space region - "tx_desc": MSGDMA Tx dispatcher descriptor space region - "rx_csr" : xDMA Rx dispatcher control and status space region - "rx_desc": MSGDMA Rx dispatcher descriptor space region - "rx_resp": MSGDMA Rx dispatcher response space region - "s1": SGDMA descriptor memory -- interrupts: Should contain the TSE interrupts and its mode. -- interrupt-names: Should contain the interrupt names - "rx_irq": xDMA Rx dispatcher interrupt - "tx_irq": xDMA Tx dispatcher interrupt -- rx-fifo-depth: MAC receive FIFO buffer depth in bytes -- tx-fifo-depth: MAC transmit FIFO buffer depth in bytes -- phy-mode: See ethernet.txt in the same directory. -- phy-handle: See ethernet.txt in the same directory. -- phy-addr: See ethernet.txt in the same directory. A configuration should - include phy-handle or phy-addr. -- altr,has-supplementary-unicast: - If present, TSE supports additional unicast addresses. - Otherwise additional unicast addresses are not supported. -- altr,has-hash-multicast-filter: - If present, TSE supports a hash based multicast filter. - Otherwise, hash-based multicast filtering is not supported. - -- mdio device tree subnode: When the TSE has a phy connected to its local - mdio, there must be device tree subnode with the following - required properties: - - - compatible: Must be "altr,tse-mdio". - - #address-cells: Must be <1>. - - #size-cells: Must be <0>. - - For each phy on the mdio bus, there must be a node with the following - fields: - - - reg: phy id used to communicate to phy. - - device_type: Must be "ethernet-phy". - -The MAC address will be determined using the optional properties defined in -ethernet.txt. - -Example: - - tse_sub_0_eth_tse_0: ethernet@1,00000000 { - compatible = "altr,tse-msgdma-1.0"; - reg = <0x00000001 0x00000000 0x00000400>, - <0x00000001 0x00000460 0x00000020>, - <0x00000001 0x00000480 0x00000020>, - <0x00000001 0x000004A0 0x00000008>, - <0x00000001 0x00000400 0x00000020>, - <0x00000001 0x00000420 0x00000020>; - reg-names = "control_port", "rx_csr", "rx_desc", "rx_resp", "tx_csr", "tx_desc"; - interrupt-parent = <&hps_0_arm_gic_0>; - interrupts = <0 41 4>, <0 40 4>; - interrupt-names = "rx_irq", "tx_irq"; - rx-fifo-depth = <2048>; - tx-fifo-depth = <2048>; - address-bits = <48>; - max-frame-size = <1500>; - local-mac-address = [ 00 00 00 00 00 00 ]; - phy-mode = "gmii"; - altr,has-supplementary-unicast; - altr,has-hash-multicast-filter; - phy-handle = <&phy0>; - mdio { - compatible = "altr,tse-mdio"; - #address-cells = <1>; - #size-cells = <0>; - phy0: ethernet-phy@0 { - reg = <0x0>; - device_type = "ethernet-phy"; - }; - - phy1: ethernet-phy@1 { - reg = <0x1>; - device_type = "ethernet-phy"; - }; - - }; - }; - - tse_sub_1_eth_tse_0: ethernet@1,00001000 { - compatible = "altr,tse-msgdma-1.0"; - reg = <0x00000001 0x00001000 0x00000400>, - <0x00000001 0x00001460 0x00000020>, - <0x00000001 0x00001480 0x00000020>, - <0x00000001 0x000014A0 0x00000008>, - <0x00000001 0x00001400 0x00000020>, - <0x00000001 0x00001420 0x00000020>; - reg-names = "control_port", "rx_csr", "rx_desc", "rx_resp", "tx_csr", "tx_desc"; - interrupt-parent = <&hps_0_arm_gic_0>; - interrupts = <0 43 4>, <0 42 4>; - interrupt-names = "rx_irq", "tx_irq"; - rx-fifo-depth = <2048>; - tx-fifo-depth = <2048>; - address-bits = <48>; - max-frame-size = <1500>; - local-mac-address = [ 00 00 00 00 00 00 ]; - phy-mode = "gmii"; - altr,has-supplementary-unicast; - altr,has-hash-multicast-filter; - phy-handle = <&phy1>; - }; diff --git a/Documentation/devicetree/bindings/net/altr,tse.yaml b/Documentation/devicetree/bindings/net/altr,tse.yaml new file mode 100644 index 000000000000..8d1d94494349 --- /dev/null +++ b/Documentation/devicetree/bindings/net/altr,tse.yaml @@ -0,0 +1,168 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/altr,tse.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Altera Triple Speed Ethernet MAC driver (TSE) + +maintainers: + - Maxime Chevallier <maxime.chevallier@bootlin.com> + +properties: + compatible: + oneOf: + - const: altr,tse-1.0 + - const: ALTR,tse-1.0 + deprecated: true + - const: altr,tse-msgdma-1.0 + + interrupts: + minItems: 2 + + interrupt-names: + items: + - const: rx_irq + - const: tx_irq + + rx-fifo-depth: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Depth in bytes of the RX FIFO + + tx-fifo-depth: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Depth in bytes of the TX FIFO + + altr,has-supplementary-unicast: + type: boolean + description: + If present, TSE supports additional unicast addresses. + + altr,has-hash-multicast-filter: + type: boolean + description: + If present, TSE supports hash based multicast filter. + + mdio: + $ref: mdio.yaml# + unevaluatedProperties: false + description: + Creates and registers an MDIO bus. + + properties: + compatible: + const: altr,tse-mdio + + required: + - compatible + +required: + - compatible + - reg + - interrupts + - rx-fifo-depth + - tx-fifo-depth + +allOf: + - $ref: "ethernet-controller.yaml#" + - if: + properties: + compatible: + contains: + enum: + - const: altr,tse-1.0 + - const: ALTR,tse-1.0 + then: + properties: + reg: + minItems: 4 + reg-names: + items: + - const: control_port + - const: rx_csr + - const: tx_csr + - const: s1 + + - if: + properties: + compatible: + contains: + enum: + - altr,tse-msgdma-1.0 + then: + properties: + reg: + minItems: 6 + maxItems: 7 + reg-names: + minItems: 6 + items: + - const: control_port + - const: rx_csr + - const: rx_desc + - const: rx_resp + - const: tx_csr + - const: tx_desc + - const: pcs + +unevaluatedProperties: false + +examples: + - | + tse_sub_0: ethernet@c0100000 { + compatible = "altr,tse-msgdma-1.0"; + reg = <0xc0100000 0x00000400>, + <0xc0101000 0x00000020>, + <0xc0102000 0x00000020>, + <0xc0103000 0x00000008>, + <0xc0104000 0x00000020>, + <0xc0105000 0x00000020>, + <0xc0106000 0x00000100>; + reg-names = "control_port", "rx_csr", "rx_desc", "rx_resp", "tx_csr", "tx_desc", "pcs"; + interrupt-parent = <&intc>; + interrupts = <0 44 4>,<0 45 4>; + interrupt-names = "rx_irq","tx_irq"; + rx-fifo-depth = <2048>; + tx-fifo-depth = <2048>; + max-frame-size = <1500>; + local-mac-address = [ 00 00 00 00 00 00 ]; + altr,has-supplementary-unicast; + altr,has-hash-multicast-filter; + sfp = <&sfp0>; + phy-mode = "sgmii"; + managed = "in-band-status"; + }; + - | + tse_sub_1_eth_tse_0: ethernet@1,00001000 { + compatible = "altr,tse-msgdma-1.0"; + reg = <0x00001000 0x00000400>, + <0x00001460 0x00000020>, + <0x00001480 0x00000020>, + <0x000014A0 0x00000008>, + <0x00001400 0x00000020>, + <0x00001420 0x00000020>; + reg-names = "control_port", "rx_csr", "rx_desc", "rx_resp", "tx_csr", "tx_desc"; + interrupt-parent = <&hps_0_arm_gic_0>; + interrupts = <0 43 4>, <0 42 4>; + interrupt-names = "rx_irq", "tx_irq"; + rx-fifo-depth = <2048>; + tx-fifo-depth = <2048>; + max-frame-size = <1500>; + local-mac-address = [ 00 00 00 00 00 00 ]; + phy-mode = "gmii"; + altr,has-supplementary-unicast; + altr,has-hash-multicast-filter; + phy-handle = <&phy1>; + mdio { + compatible = "altr,tse-mdio"; + #address-cells = <1>; + #size-cells = <0>; + phy1: ethernet-phy@1 { + reg = <0x1>; + }; + }; + }; + +... diff --git a/MAINTAINERS b/MAINTAINERS index 9479f77afb8e..9688a27deef1 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -878,6 +878,13 @@ L: netdev@vger.kernel.org S: Maintained F: drivers/net/ethernet/altera/ +ALTERA TSE PCS +M: Maxime Chevallier <maxime.chevallier@bootlin.com> +L: netdev@vger.kernel.org +S: Supported +F: drivers/net/pcs/pcs-altera-tse.c +F: include/linux/pcs-altera-tse.h + ALTERA UART/JTAG UART SERIAL DRIVERS M: Tobias Klauser <tklauser@distanz.ch> L: linux-serial@vger.kernel.org diff --git a/drivers/net/ethernet/altera/Kconfig b/drivers/net/ethernet/altera/Kconfig index 914e56b91467..dd7fd41ccde5 100644 --- a/drivers/net/ethernet/altera/Kconfig +++ b/drivers/net/ethernet/altera/Kconfig @@ -3,6 +3,8 @@ config ALTERA_TSE tristate "Altera Triple-Speed Ethernet MAC support" depends on HAS_DMA select PHYLIB + select PHYLINK + select PCS_ALTERA_TSE help This driver supports the Altera Triple-Speed (TSE) Ethernet MAC. diff --git a/drivers/net/ethernet/altera/altera_tse.h b/drivers/net/ethernet/altera/altera_tse.h index f17acfb579a0..db5eed06e92d 100644 --- a/drivers/net/ethernet/altera/altera_tse.h +++ b/drivers/net/ethernet/altera/altera_tse.h @@ -27,6 +27,7 @@ #include <linux/list.h> #include <linux/netdevice.h> #include <linux/phy.h> +#include <linux/phylink.h> #define ALTERA_TSE_SW_RESET_WATCHDOG_CNTR 10000 #define ALTERA_TSE_MAC_FIFO_WIDTH 4 /* TX/RX FIFO width in @@ -109,17 +110,6 @@ #define MAC_CMDCFG_DISABLE_READ_TIMEOUT_GET(v) GET_BIT_VALUE(v, 27) #define MAC_CMDCFG_CNT_RESET_GET(v) GET_BIT_VALUE(v, 31) -/* SGMII PCS register addresses - */ -#define SGMII_PCS_SCRATCH 0x10 -#define SGMII_PCS_REV 0x11 -#define SGMII_PCS_LINK_TIMER_0 0x12 -#define SGMII_PCS_LINK_TIMER_1 0x13 -#define SGMII_PCS_IF_MODE 0x14 -#define SGMII_PCS_DIS_READ_TO 0x15 -#define SGMII_PCS_READ_TO 0x16 -#define SGMII_PCS_SW_RESET_TIMEOUT 100 /* usecs */ - /* MDIO registers within MAC register Space */ struct altera_tse_mdio { @@ -423,6 +413,9 @@ struct altera_tse_private { void __iomem *tx_dma_csr; void __iomem *tx_dma_desc; + /* SGMII PCS address space */ + void __iomem *pcs_base; + /* Rx buffers queue */ struct tse_buffer *rx_ring; u32 rx_cons; @@ -480,6 +473,10 @@ struct altera_tse_private { u32 msg_enable; struct altera_dmaops *dmaops; + + struct phylink *phylink; + struct phylink_config phylink_config; + struct phylink_pcs *pcs; }; /* Function prototypes diff --git a/drivers/net/ethernet/altera/altera_tse_ethtool.c b/drivers/net/ethernet/altera/altera_tse_ethtool.c index 3081e5874ac5..81313c85833e 100644 --- a/drivers/net/ethernet/altera/altera_tse_ethtool.c +++ b/drivers/net/ethernet/altera/altera_tse_ethtool.c @@ -199,9 +199,9 @@ static int tse_reglen(struct net_device *dev) static void tse_get_regs(struct net_device *dev, struct ethtool_regs *regs, void *regbuf) { - int i; struct altera_tse_private *priv = netdev_priv(dev); u32 *buf = regbuf; + int i; /* Set version to a known value, so ethtool knows * how to do any special formatting of this data. @@ -221,6 +221,22 @@ static void tse_get_regs(struct net_device *dev, struct ethtool_regs *regs, buf[i] = csrrd32(priv->mac_dev, i * 4); } +static int tse_ethtool_set_link_ksettings(struct net_device *dev, + const struct ethtool_link_ksettings *cmd) +{ + struct altera_tse_private *priv = netdev_priv(dev); + + return phylink_ethtool_ksettings_set(priv->phylink, cmd); +} + +static int tse_ethtool_get_link_ksettings(struct net_device *dev, + struct ethtool_link_ksettings *cmd) +{ + struct altera_tse_private *priv = netdev_priv(dev); + + return phylink_ethtool_ksettings_get(priv->phylink, cmd); +} + static const struct ethtool_ops tse_ethtool_ops = { .get_drvinfo = tse_get_drvinfo, .get_regs_len = tse_reglen, @@ -231,8 +247,8 @@ static const struct ethtool_ops tse_ethtool_ops = { .get_ethtool_stats = tse_fill_stats, .get_msglevel = tse_get_msglevel, .set_msglevel = tse_set_msglevel, - .get_link_ksettings = phy_ethtool_get_link_ksettings, - .set_link_ksettings = phy_ethtool_set_link_ksettings, + .get_link_ksettings = tse_ethtool_get_link_ksettings, + .set_link_ksettings = tse_ethtool_set_link_ksettings, .get_ts_info = ethtool_op_get_ts_info, }; diff --git a/drivers/net/ethernet/altera/altera_tse_main.c b/drivers/net/ethernet/altera/altera_tse_main.c index 8c5828582c21..89ae6d1623aa 100644 --- a/drivers/net/ethernet/altera/altera_tse_main.c +++ b/drivers/net/ethernet/altera/altera_tse_main.c @@ -32,6 +32,7 @@ #include <linux/of_mdio.h> #include <linux/of_net.h> #include <linux/of_platform.h> +#include <linux/pcs-altera-tse.h> #include <linux/phy.h> #include <linux/platform_device.h> #include <linux/skbuff.h> @@ -86,27 +87,6 @@ static inline u32 tse_tx_avail(struct altera_tse_private *priv) return priv->tx_cons + priv->tx_ring_size - priv->tx_prod - 1; } -/* PCS Register read/write functions - */ -static u16 sgmii_pcs_read(struct altera_tse_private *priv, int regnum) -{ - return csrrd32(priv->mac_dev, - tse_csroffs(mdio_phy0) + regnum * 4) & 0xffff; -} - -static void sgmii_pcs_write(struct altera_tse_private *priv, int regnum, - u16 value) -{ - csrwr32(value, priv->mac_dev, tse_csroffs(mdio_phy0) + regnum * 4); -} - -/* Check PCS scratch memory */ -static int sgmii_pcs_scratch_test(struct altera_tse_private *priv, u16 value) -{ - sgmii_pcs_write(priv, SGMII_PCS_SCRATCH, value); - return (sgmii_pcs_read(priv, SGMII_PCS_SCRATCH) == value); -} - /* MDIO specific functions */ static int altera_tse_mdio_read(struct mii_bus *bus, int mii_id, int regnum) @@ -141,10 +121,10 @@ static int altera_tse_mdio_write(struct mii_bus *bus, int mii_id, int regnum, static int altera_tse_mdio_create(struct net_device *dev, unsigned int id) { struct altera_tse_private *priv = netdev_priv(dev); - int ret; struct device_node *mdio_node = NULL; - struct mii_bus *mdio = NULL; struct device_node *child_node = NULL; + struct mii_bus *mdio = NULL; + int ret; for_each_child_of_node(priv->device->of_node, child_node) { if (of_device_is_compatible(child_node, "altr,tse-mdio")) { @@ -236,8 +216,8 @@ static int tse_init_rx_buffer(struct altera_tse_private *priv, static void tse_free_rx_buffer(struct altera_tse_private *priv, struct tse_buffer *rxbuffer) { - struct sk_buff *skb = rxbuffer->skb; dma_addr_t dma_addr = rxbuffer->dma_addr; + struct sk_buff *skb = rxbuffer->skb; if (skb != NULL) { if (dma_addr) @@ -358,6 +338,7 @@ static inline void tse_rx_vlan(struct net_device *dev, struct sk_buff *skb) { struct ethhdr *eth_hdr; u16 vid; + if ((dev->features & NETIF_F_HW_VLAN_CTAG_RX) && !__vlan_get_tag(skb, &vid)) { eth_hdr = (struct ethhdr *)skb->data; @@ -371,10 +352,10 @@ static inline void tse_rx_vlan(struct net_device *dev, struct sk_buff *skb) */ static int tse_rx(struct altera_tse_private *priv, int limit) { - unsigned int count = 0; + unsigned int entry = priv->rx_cons % priv->rx_ring_size; unsigned int next_entry; + unsigned int count = 0; struct sk_buff *skb; - unsigned int entry = priv->rx_cons % priv->rx_ring_size; u32 rxstatus; u16 pktlength; u16 pktstatus; @@ -448,10 +429,10 @@ static int tse_rx(struct altera_tse_private *priv, int limit) static int tse_tx_complete(struct altera_tse_private *priv) { unsigned int txsize = priv->tx_ring_size; - u32 ready; - unsigned int entry; struct tse_buffer *tx_buff; + unsigned int entry; int txcomplete = 0; + u32 ready; spin_lock(&priv->tx_lock); @@ -497,8 +478,8 @@ static int tse_poll(struct napi_struct *napi, int budget) { struct altera_tse_private *priv = container_of(napi, struct altera_tse_private, napi); - int rxcomplete = 0; unsigned long int flags; + int rxcomplete = 0; tse_tx_complete(priv); @@ -561,13 +542,13 @@ static irqreturn_t altera_isr(int irq, void *dev_id) static netdev_tx_t tse_start_xmit(struct sk_buff *skb, struct net_device *dev) { struct altera_tse_private *priv = netdev_priv(dev); + unsigned int nopaged_len = skb_headlen(skb); unsigned int txsize = priv->tx_ring_size; - unsigned int entry; - struct tse_buffer *buffer = NULL; int nfrags = skb_shinfo(skb)->nr_frags; - unsigned int nopaged_len = skb_headlen(skb); + struct tse_buffer *buffer = NULL; netdev_tx_t ret = NETDEV_TX_OK; dma_addr_t dma_addr; + unsigned int entry; spin_lock_bh(&priv->tx_lock); @@ -619,117 +600,6 @@ out: return ret; } -/* Called every time the controller might need to be made - * aware of new link state. The PHY code conveys this - * information through variables in the phydev structure, and this - * function converts those variables into the appropriate - * register values, and can bring down the device if needed. - */ -static void altera_tse_adjust_link(struct net_device *dev) -{ - struct altera_tse_private *priv = netdev_priv(dev); - struct phy_device *phydev = dev->phydev; - int new_state = 0; - - /* only change config if there is a link */ - spin_lock(&priv->mac_cfg_lock); - if (phydev->link) { - /* Read old config */ - u32 cfg_reg = ioread32(&priv->mac_dev->command_config); - - /* Check duplex */ - if (phydev->duplex != priv->oldduplex) { - new_state = 1; - if (!(phydev->duplex)) - cfg_reg |= MAC_CMDCFG_HD_ENA; - else - cfg_reg &= ~MAC_CMDCFG_HD_ENA; - - netdev_dbg(priv->dev, "%s: Link duplex = 0x%x\n", - dev->name, phydev->duplex); - - priv->oldduplex = phydev->duplex; - } - - /* Check speed */ - if (phydev->speed != priv->oldspeed) { - new_state = 1; - switch (phydev->speed) { - case 1000: - cfg_reg |= MAC_CMDCFG_ETH_SPEED; - cfg_reg &= ~MAC_CMDCFG_ENA_10; - break; - case 100: - cfg_reg &= ~MAC_CMDCFG_ETH_SPEED; - cfg_reg &= ~MAC_CMDCFG_ENA_10; - break; - case 10: - cfg_reg &= ~MAC_CMDCFG_ETH_SPEED; - cfg_reg |= MAC_CMDCFG_ENA_10; - break; - default: - if (netif_msg_link(priv)) - netdev_warn(dev, "Speed (%d) is not 10/100/1000!\n", - phydev->speed); - break; - } - priv->oldspeed = phydev->speed; - } - iowrite32(cfg_reg, &priv->mac_dev->command_config); - - if (!priv->oldlink) { - new_state = 1; - priv->oldlink = 1; - } - } else if (priv->oldlink) { - new_state = 1; - priv->oldlink = 0; - priv->oldspeed = 0; - priv->oldduplex = -1; - } - - if (new_state && netif_msg_link(priv)) - phy_print_status(phydev); - - spin_unlock(&priv->mac_cfg_lock); -} -static struct phy_device *connect_local_phy(struct net_device *dev) -{ - struct altera_tse_private *priv = netdev_priv(dev); - struct phy_device *phydev = NULL; - char phy_id_fmt[MII_BUS_ID_SIZE + 3]; - - if (priv->phy_addr != POLL_PHY) { - snprintf(phy_id_fmt, MII_BUS_ID_SIZE + 3, PHY_ID_FMT, - priv->mdio->id, priv->phy_addr); - - netdev_dbg(dev, "trying to attach to %s\n", phy_id_fmt); - - phydev = phy_connect(dev, phy_id_fmt, &altera_tse_adjust_link, - priv->phy_iface); - if (IS_ERR(phydev)) { - netdev_err(dev, "Could not attach to PHY\n"); - phydev = NULL; - } - - } else { - int ret; - phydev = phy_find_first(priv->mdio); - if (phydev == NULL) { - netdev_err(dev, "No PHY found\n"); - return phydev; - } - - ret = phy_connect_direct(dev, phydev, &altera_tse_adjust_link, - priv->phy_iface); - if (ret != 0) { - netdev_err(dev, "Could not attach to PHY\n"); - phydev = NULL; - } - } - return phydev; -} - static int altera_tse_phy_get_addr_mdio_create(struct net_device *dev) { struct altera_tse_private *priv = netdev_priv(dev); @@ -768,91 +638,6 @@ static int altera_tse_phy_get_addr_mdio_create(struct net_device *dev) return 0; } -/* Initialize driver's PHY state, and attach to the PHY - */ -static int init_phy(struct net_device *dev) -{ - struct altera_tse_private *priv = netdev_priv(dev); - struct phy_device *phydev; - struct device_node *phynode; - bool fixed_link = false; - int rc = 0; - - /* Avoid init phy in case of no phy present */ - if (!priv->phy_iface) - return 0; - - priv->oldlink = 0; - priv->oldspeed = 0; - priv->oldduplex = -1; - - phynode = of_parse_phandle(priv->device->of_node, "phy-handle", 0); - - if (!phynode) { - /* check if a fixed-link is defined in device-tree */ - if (of_phy_is_fixed_link(priv->device->of_node)) { - rc = of_phy_register_fixed_link(priv->device->of_node); - if (rc < 0) { - netdev_err(dev, "cannot register fixed PHY\n"); - return rc; - } - - /* In the case of a fixed PHY, the DT node associated - * to the PHY is the Ethernet MAC DT node. - */ - phynode = of_node_get(priv->device->of_node); - fixed_link = true; - - netdev_dbg(dev, "fixed-link detected\n"); - phydev = of_phy_connect(dev, phynode, - &altera_tse_adjust_link, - 0, priv->phy_iface); - } else { - netdev_dbg(dev, "no phy-handle found\n"); - if (!priv->mdio) { - netdev_err(dev, "No phy-handle nor local mdio specified\n"); - return -ENODEV; - } - phydev = connect_local_phy(dev); - } - } else { - netdev_dbg(dev, "phy-handle found\n"); - phydev = of_phy_connect(dev, phynode, - &altera_tse_adjust_link, 0, priv->phy_iface); - } - of_node_put(phynode); - - if (!phydev) { - netdev_err(dev, "Could not find the PHY\n"); - if (fixed_link) - of_phy_deregister_fixed_link(priv->device->of_node); - return -ENODEV; - } - - /* Stop Advertising 1000BASE Capability if interface is not GMII - */ - if ((priv->phy_iface == PHY_INTERFACE_MODE_MII) || - (priv->phy_iface == PHY_INTERFACE_MODE_RMII)) - phy_set_max_speed(phydev, SPEED_100); - - /* Broken HW is sometimes missing the pull-up resistor on the - * MDIO line, which results in reads to non-existent devices returning - * 0 rather than 0xffff. Catch this here and treat 0 as a non-existent - * device as well. If a fixed-link is used the phy_id is always 0. - * Note: phydev->phy_id is the result of reading the UID PHY registers. - */ - if ((phydev->phy_id == 0) && !fixed_link) { - netdev_err(dev, "Bad PHY UID 0x%08x\n", phydev->phy_id); - phy_disconnect(phydev); - return -ENODEV; - } - - netdev_dbg(dev, "attached to PHY %d UID 0x%08x Link = %d\n", - phydev->mdio.addr, phydev->phy_id, phydev->link); - - return 0; -} - static void tse_update_mac_addr(struct altera_tse_private *priv, const u8 *addr) { u32 msb; @@ -1012,8 +797,8 @@ static int tse_change_mtu(struct net_device *dev, int new_mtu) static void altera_tse_set_mcfilter(struct net_device *dev) { struct altera_tse_private *priv = netdev_priv(dev); - int i; struct netdev_hw_addr *ha; + int i; /* clear the hash filter */ for (i = 0; i < 64; i++) @@ -1087,74 +872,14 @@ static void tse_set_rx_mode(struct net_device *dev) spin_unlock(&priv->mac_cfg_lock); } -/* Initialise (if necessary) the SGMII PCS component - */ -static int init_sgmii_pcs(struct net_device *dev) -{ - struct altera_tse_private *priv = netdev_priv(dev); - int n; - unsigned int tmp_reg = 0; - - if (priv->phy_iface != PHY_INTERFACE_MODE_SGMII) - return 0; /* Nothing to do, not in SGMII mode */ - - /* The TSE SGMII PCS block looks a little like a PHY, it is - * mapped into the zeroth MDIO space of the MAC and it has - * ID registers like a PHY would. Sadly this is often - * configured to zeroes, so don't be surprised if it does - * show 0x00000000. - */ - - if (sgmii_pcs_scratch_test(priv, 0x0000) && - sgmii_pcs_scratch_test(priv, 0xffff) && - sgmii_pcs_scratch_test(priv, 0xa5a5) && - sgmii_pcs_scratch_test(priv, 0x5a5a)) { - netdev_info(dev, "PCS PHY ID: 0x%04x%04x\n", - sgmii_pcs_read(priv, MII_PHYSID1), - sgmii_pcs_read(priv, MII_PHYSID2)); - } else { - netdev_err(dev, "SGMII PCS Scratch memory test failed.\n"); - return -ENOMEM; - } - - /* Starting on page 5-29 of the MegaCore Function User Guide - * Set SGMII Link timer to 1.6ms - */ - sgmii_pcs_write(priv, SGMII_PCS_LINK_TIMER_0, 0x0D40); - sgmii_pcs_write(priv, SGMII_PCS_LINK_TIMER_1, 0x03); - - /* Enable SGMII Interface and Enable SGMII Auto Negotiation */ - sgmii_pcs_write(priv, SGMII_PCS_IF_MODE, 0x3); - - /* Enable Autonegotiation */ - tmp_reg = sgmii_pcs_read(priv, MII_BMCR); - tmp_reg |= (BMCR_SPEED1000 | BMCR_FULLDPLX | BMCR_ANENABLE); - sgmii_pcs_write(priv, MII_BMCR, tmp_reg); - - /* Reset PCS block */ - tmp_reg |= BMCR_RESET; - sgmii_pcs_write(priv, MII_BMCR, tmp_reg); - for (n = 0; n < SGMII_PCS_SW_RESET_TIMEOUT; n++) { - if (!(sgmii_pcs_read(priv, MII_BMCR) & BMCR_RESET)) { - netdev_info(dev, "SGMII PCS block initialised OK\n"); - return 0; - } - udelay(1); - } - - /* We failed to reset the block, return a timeout */ - netdev_err(dev, "SGMII PCS block reset failed.\n"); - return -ETIMEDOUT; -} - /* Open and initialize the interface */ static int tse_open(struct net_device *dev) { struct altera_tse_private *priv = netdev_priv(dev); + unsigned long flags; int ret = 0; int i; - unsigned long int flags; /* Reset and configure TSE MAC and probe associated PHY */ ret = priv->dmaops->init_dma(priv); @@ -1171,14 +896,6 @@ static int tse_open(struct net_device *dev) netdev_warn(dev, "TSE revision %x\n", priv->revision); spin_lock(&priv->mac_cfg_lock); - /* no-op if MAC not operating in SGMII mode*/ - ret = init_sgmii_pcs(dev); - if (ret) { - netdev_err(dev, - "Cannot init the SGMII PCS (error: %d)\n", ret); - spin_unlock(&priv->mac_cfg_lock); - goto phy_error; - } ret = reset_mac(priv); /* Note that reset_mac will fail if the clocks are gated by the PHY @@ -1236,8 +953,12 @@ static int tse_open(struct net_device *dev) spin_unlock_irqrestore(&priv->rxdma_irq_lock, flags); - if (dev->phydev) - phy_start(dev->phydev); + ret = phylink_of_phy_connect(priv->phylink, priv->device->of_node, 0); + if (ret) { + netdev_err(dev, "could not connect phylink (%d)\n", ret); + goto tx_request_irq_error; + } + phylink_start(priv->phylink); napi_enable(&priv->napi); netif_start_queue(dev); @@ -1265,13 +986,10 @@ phy_error: static int tse_shutdown(struct net_device *dev) { struct altera_tse_private *priv = netdev_priv(dev); - int ret; unsigned long int flags; + int ret; - /* Stop the PHY */ - if (dev->phydev) - phy_stop(dev->phydev); - + phylink_stop(priv->phylink); netif_stop_queue(dev); napi_disable(&priv->napi); @@ -1317,11 +1035,79 @@ static struct net_device_ops altera_tse_netdev_ops = { .ndo_validate_addr = eth_validate_addr, }; +static void alt_tse_mac_an_restart(struct phylink_config *config) +{ +} + +static void alt_tse_mac_config(struct phylink_config *config, unsigned int mode, + const struct phylink_link_state *state) +{ + struct net_device *ndev = to_net_dev(config->dev); + struct altera_tse_private *priv = netdev_priv(ndev); + + spin_lock(&priv->mac_cfg_lock); + reset_mac(priv); + tse_set_mac(priv, true); + spin_unlock(&priv->mac_cfg_lock); +} + +static void alt_tse_mac_link_down(struct phylink_config *config, + unsigned int mode, phy_interface_t interface) +{ +} + +static void alt_tse_mac_link_up(struct phylink_config *config, + struct phy_device *phy, unsigned int mode, + phy_interface_t interface, int speed, + int duplex, bool tx_pause, bool rx_pause) +{ + struct net_device *ndev = to_net_dev(config->dev); + struct altera_tse_private *priv = netdev_priv(ndev); + u32 ctrl; + + ctrl = csrrd32(priv->mac_dev, tse_csroffs(command_config)); + ctrl &= ~(MAC_CMDCFG_ENA_10 | MAC_CMDCFG_ETH_SPEED | MAC_CMDCFG_HD_ENA); + + if (duplex == DUPLEX_HALF) + ctrl |= MAC_CMDCFG_HD_ENA; + + if (speed == SPEED_1000) + ctrl |= MAC_CMDCFG_ETH_SPEED; + else if (speed == SPEED_10) + ctrl |= MAC_CMDCFG_ENA_10; + + spin_lock(&priv->mac_cfg_lock); + csrwr32(ctrl, priv->mac_dev, tse_csroffs(command_config)); + spin_unlock(&priv->mac_cfg_lock); +} + +static struct phylink_pcs *alt_tse_select_pcs(struct phylink_config *config, + phy_interface_t interface) +{ + struct net_device *ndev = to_net_dev(config->dev); + struct altera_tse_private *priv = netdev_priv(ndev); + + if (interface == PHY_INTERFACE_MODE_SGMII || + interface == PHY_INTERFACE_MODE_1000BASEX) + return priv->pcs; + else + return NULL; +} + +static const struct phylink_mac_ops alt_tse_phylink_ops = { + .validate = phylink_generic_validate, + .mac_an_restart = alt_tse_mac_an_restart, + .mac_config = alt_tse_mac_config, + .mac_link_down = alt_tse_mac_link_down, + .mac_link_up = alt_tse_mac_link_up, + .mac_select_pcs = alt_tse_select_pcs, +}; + static int request_and_map(struct platform_device *pdev, const char *name, struct resource **res, void __iomem **ptr) { - struct resource *region; struct device *device = &pdev->dev; + struct resource *region; *res = platform_get_resource_byname(pdev, IORESOURCE_MEM, name); if (*res == NULL) { @@ -1350,13 +1136,15 @@ static int request_and_map(struct platform_device *pdev, const char *name, */ static int altera_tse_probe(struct platform_device *pdev) { - struct net_device *ndev; - int ret = -ENODEV; + const struct of_device_id *of_id = NULL; + struct altera_tse_private *priv; struct resource *control_port; struct resource *dma_res; - struct altera_tse_private *priv; + struct resource *pcs_res; + struct net_device *ndev; void __iomem *descmap; - const struct of_device_id *of_id = NULL; + int pcs_reg_width = 2; + int ret = -ENODEV; ndev = alloc_etherdev(sizeof(struct altera_tse_private)); if (!ndev) { @@ -1467,6 +1255,17 @@ static int altera_tse_probe(struct platform_device *pdev) if (ret) goto err_free_netdev; + /* SGMII PCS address space. The location can vary depending on how the + * IP is integrated. We can have a resource dedicated to it at a specific + * address space, but if it's not the case, we fallback to the mdiophy0 + * from the MAC's address space + */ + ret = request_and_map(pdev, "pcs", &pcs_res, + &priv->pcs_base); + if (ret) { + priv->pcs_base = priv->mac_dev + tse_csroffs(mdio_phy0); + pcs_reg_width = 4; + } /* Rx IRQ */ priv->rx_irq = platform_get_irq_byname(pdev, "rx_irq"); @@ -1590,11 +1389,31 @@ static int altera_tse_probe(struct platform_device *pdev) (unsigned long) control_port->start, priv->rx_irq, priv->tx_irq); - ret = init_phy(ndev); - if (ret != 0) { - netdev_err(ndev, "Cannot attach to PHY (error: %d)\n", ret); + priv->pcs = alt_tse_pcs_create(ndev, priv->pcs_base, pcs_reg_width); + + priv->phylink_config.dev = &ndev->dev; + priv->phylink_config.type = PHYLINK_NETDEV; + priv->phylink_config.mac_capabilities = MAC_SYM_PAUSE | MAC_10 | + MAC_100 | MAC_1000FD; + + phy_interface_set_rgmii(priv->phylink_config.supported_interfaces); + __set_bit(PHY_INTERFACE_MODE_MII, + priv->phylink_config.supported_interfaces); + __set_bit(PHY_INTERFACE_MODE_GMII, + priv->phylink_config.supported_interfaces); + __set_bit(PHY_INTERFACE_MODE_SGMII, + priv->phylink_config.supported_interfaces); + __set_bit(PHY_INTERFACE_MODE_1000BASEX, + priv->phylink_config.supported_interfaces); + + priv->phylink = phylink_create(&priv->phylink_config, + of_fwnode_handle(priv->device->of_node), + priv->phy_iface, &alt_tse_phylink_ops); + if (IS_ERR(priv->phylink)) { + dev_err(&pdev->dev, "failed to create phylink\n"); goto err_init_phy; } + return 0; err_init_phy: @@ -1614,16 +1433,10 @@ static int altera_tse_remove(struct platform_device *pdev) struct net_device *ndev = platform_get_drvdata(pdev); struct altera_tse_private *priv = netdev_priv(ndev); - if (ndev->phydev) { - phy_disconnect(ndev->phydev); - - if (of_phy_is_fixed_link(priv->device->of_node)) - of_phy_deregister_fixed_link(priv->device->of_node); - } - platform_set_drvdata(pdev, NULL); altera_tse_mdio_destroy(ndev); unregister_netdev(ndev); + phylink_destroy(priv->phylink); free_netdev(ndev); return 0; diff --git a/drivers/net/pcs/Kconfig b/drivers/net/pcs/Kconfig index 6289b7c765f1..6e7e6c346a3e 100644 --- a/drivers/net/pcs/Kconfig +++ b/drivers/net/pcs/Kconfig @@ -26,4 +26,10 @@ config PCS_RZN1_MIIC on RZ/N1 SoCs. This PCS converts MII to RMII/RGMII or can be set in pass-through mode for MII. +config PCS_ALTERA_TSE + tristate + help + This module provides helper functions for the Altera Triple Speed + Ethernet SGMII PCS, that can be found on the Intel Socfpga family. + endmenu diff --git a/drivers/net/pcs/Makefile b/drivers/net/pcs/Makefile index 0ff5388fcdea..4c780d8f2e98 100644 --- a/drivers/net/pcs/Makefile +++ b/drivers/net/pcs/Makefile @@ -6,3 +6,4 @@ pcs_xpcs-$(CONFIG_PCS_XPCS) := pcs-xpcs.o pcs-xpcs-nxp.o obj-$(CONFIG_PCS_XPCS) += pcs_xpcs.o obj-$(CONFIG_PCS_LYNX) += pcs-lynx.o obj-$(CONFIG_PCS_RZN1_MIIC) += pcs-rzn1-miic.o +obj-$(CONFIG_PCS_ALTERA_TSE) += pcs-altera-tse.o diff --git a/drivers/net/pcs/pcs-altera-tse.c b/drivers/net/pcs/pcs-altera-tse.c new file mode 100644 index 000000000000..97a7cabff962 --- /dev/null +++ b/drivers/net/pcs/pcs-altera-tse.c @@ -0,0 +1,175 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2022 Bootlin + * + * Maxime Chevallier <maxime.chevallier@bootlin.com> + */ + +#include <linux/netdevice.h> +#include <linux/phy.h> +#include <linux/phylink.h> +#include <linux/pcs-altera-tse.h> + +/* SGMII PCS register addresses + */ +#define SGMII_PCS_SCRATCH 0x10 +#define SGMII_PCS_REV 0x11 +#define SGMII_PCS_LINK_TIMER_0 0x12 +#define SGMII_PCS_LINK_TIMER_REG(x) (0x12 + (x)) +#define SGMII_PCS_LINK_TIMER_1 0x13 +#define SGMII_PCS_IF_MODE 0x14 +#define PCS_IF_MODE_SGMII_ENA BIT(0) +#define PCS_IF_MODE_USE_SGMII_AN BIT(1) +#define PCS_IF_MODE_SGMI_SPEED_MASK GENMASK(3, 2) +#define PCS_IF_MODE_SGMI_SPEED_10 (0 << 2) +#define PCS_IF_MODE_SGMI_SPEED_100 (1 << 2) +#define PCS_IF_MODE_SGMI_SPEED_1000 (2 << 2) +#define PCS_IF_MODE_SGMI_HALF_DUPLEX BIT(4) +#define PCS_IF_MODE_SGMI_PHY_AN BIT(5) +#define SGMII_PCS_DIS_READ_TO 0x15 +#define SGMII_PCS_READ_TO 0x16 +#define SGMII_PCS_SW_RESET_TIMEOUT 100 /* usecs */ + +struct altera_tse_pcs { + struct phylink_pcs pcs; + void __iomem *base; + int reg_width; +}; + +static struct altera_tse_pcs *phylink_pcs_to_tse_pcs(struct phylink_pcs *pcs) +{ + return container_of(pcs, struct altera_tse_pcs, pcs); +} + +static u16 tse_pcs_read(struct altera_tse_pcs *tse_pcs, int regnum) +{ + if (tse_pcs->reg_width == 4) + return readl(tse_pcs->base + regnum * 4); + else + return readw(tse_pcs->base + regnum * 2); +} + +static void tse_pcs_write(struct altera_tse_pcs *tse_pcs, int regnum, + u16 value) +{ + if (tse_pcs->reg_width == 4) + writel(value, tse_pcs->base + regnum * 4); + else + writew(value, tse_pcs->base + regnum * 2); +} + +static int tse_pcs_reset(struct altera_tse_pcs *tse_pcs) +{ + int i = 0; + u16 bmcr; + + /* Reset PCS block */ + bmcr = tse_pcs_read(tse_pcs, MII_BMCR); + bmcr |= BMCR_RESET; + tse_pcs_write(tse_pcs, MII_BMCR, bmcr); + + for (i = 0; i < SGMII_PCS_SW_RESET_TIMEOUT; i++) { + if (!(tse_pcs_read(tse_pcs, MII_BMCR) & BMCR_RESET)) + return 0; + udelay(1); + } + + return -ETIMEDOUT; +} + +static int alt_tse_pcs_validate(struct phylink_pcs *pcs, + unsigned long *supported, + const struct phylink_link_state *state) +{ + if (state->interface == PHY_INTERFACE_MODE_SGMII || + state->interface == PHY_INTERFACE_MODE_1000BASEX) + return 1; + + return -EINVAL; +} + +static int alt_tse_pcs_config(struct phylink_pcs *pcs, unsigned int mode, + phy_interface_t interface, + const unsigned long *advertising, + bool permit_pause_to_mac) +{ + struct altera_tse_pcs *tse_pcs = phylink_pcs_to_tse_pcs(pcs); + u32 ctrl, if_mode; + + ctrl = tse_pcs_read(tse_pcs, MII_BMCR); + if_mode = tse_pcs_read(tse_pcs, SGMII_PCS_IF_MODE); + + /* Set link timer to 1.6ms, as per the MegaCore Function User Guide */ + tse_pcs_write(tse_pcs, SGMII_PCS_LINK_TIMER_0, 0x0D40); + tse_pcs_write(tse_pcs, SGMII_PCS_LINK_TIMER_1, 0x03); + + if (interface == PHY_INTERFACE_MODE_SGMII) { + if_mode |= PCS_IF_MODE_USE_SGMII_AN | PCS_IF_MODE_SGMII_ENA; + } else if (interface == PHY_INTERFACE_MODE_1000BASEX) { + if_mode &= ~(PCS_IF_MODE_USE_SGMII_AN | PCS_IF_MODE_SGMII_ENA); + if_mode |= PCS_IF_MODE_SGMI_SPEED_1000; + } + + ctrl |= (BMCR_SPEED1000 | BMCR_FULLDPLX | BMCR_ANENABLE); + + tse_pcs_write(tse_pcs, MII_BMCR, ctrl); + tse_pcs_write(tse_pcs, SGMII_PCS_IF_MODE, if_mode); + + return tse_pcs_reset(tse_pcs); +} + +static void alt_tse_pcs_get_state(struct phylink_pcs *pcs, + struct phylink_link_state *state) +{ + struct altera_tse_pcs *tse_pcs = phylink_pcs_to_tse_pcs(pcs); + u16 bmsr, lpa; + + bmsr = tse_pcs_read(tse_pcs, MII_BMSR); + lpa = tse_pcs_read(tse_pcs, MII_LPA); + + phylink_mii_c22_pcs_decode_state(state, bmsr, lpa); +} + +static void alt_tse_pcs_an_restart(struct phylink_pcs *pcs) +{ + struct altera_tse_pcs *tse_pcs = phylink_pcs_to_tse_pcs(pcs); + u16 bmcr; + + bmcr = tse_pcs_read(tse_pcs, MII_BMCR); + bmcr |= BMCR_ANRESTART; + tse_pcs_write(tse_pcs, MII_BMCR, bmcr); + + /* This PCS seems to require a soft reset to re-sync the AN logic */ + tse_pcs_reset(tse_pcs); +} + +static const struct phylink_pcs_ops alt_tse_pcs_ops = { + .pcs_validate = alt_tse_pcs_validate, + .pcs_get_state = alt_tse_pcs_get_state, + .pcs_config = alt_tse_pcs_config, + .pcs_an_restart = alt_tse_pcs_an_restart, +}; + +struct phylink_pcs *alt_tse_pcs_create(struct net_device *ndev, + void __iomem *pcs_base, int reg_width) +{ + struct altera_tse_pcs *tse_pcs; + + if (reg_width != 4 && reg_width != 2) + return ERR_PTR(-EINVAL); + + tse_pcs = devm_kzalloc(&ndev->dev, sizeof(*tse_pcs), GFP_KERNEL); + if (!tse_pcs) + return ERR_PTR(-ENOMEM); + + tse_pcs->pcs.ops = &alt_tse_pcs_ops; + tse_pcs->base = pcs_base; + tse_pcs->reg_width = reg_width; + + return &tse_pcs->pcs; +} +EXPORT_SYMBOL_GPL(alt_tse_pcs_create); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Altera TSE PCS driver"); +MODULE_AUTHOR("Maxime Chevallier <maxime.chevallier@bootlin.com>"); diff --git a/include/linux/pcs-altera-tse.h b/include/linux/pcs-altera-tse.h new file mode 100644 index 000000000000..92ab9f08e835 --- /dev/null +++ b/include/linux/pcs-altera-tse.h @@ -0,0 +1,17 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2022 Bootlin + * + * Maxime Chevallier <maxime.chevallier@bootlin.com> + */ + +#ifndef __LINUX_PCS_ALTERA_TSE_H +#define __LINUX_PCS_ALTERA_TSE_H + +struct phylink_pcs; +struct net_device; + +struct phylink_pcs *alt_tse_pcs_create(struct net_device *ndev, + void __iomem *pcs_base, int reg_width); + +#endif /* __LINUX_PCS_ALTERA_TSE_H */ |