summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--drivers/phy/marvell/Kconfig11
-rw-r--r--drivers/phy/marvell/Makefile1
-rw-r--r--drivers/phy/marvell/phy-pxa-usb.c345
3 files changed, 357 insertions, 0 deletions
diff --git a/drivers/phy/marvell/Kconfig b/drivers/phy/marvell/Kconfig
index 68e321225400..6fb4b56e4c14 100644
--- a/drivers/phy/marvell/Kconfig
+++ b/drivers/phy/marvell/Kconfig
@@ -59,3 +59,14 @@ config PHY_PXA_28NM_USB2
The PHY driver will be used by Marvell udc/ehci/otg driver.
To compile this driver as a module, choose M here.
+
+config PHY_PXA_USB
+ tristate "Marvell PXA USB PHY Driver"
+ depends on ARCH_PXA || ARCH_MMP
+ select GENERIC_PHY
+ help
+ Enable this to support Marvell PXA USB PHY driver for Marvell
+ SoC. This driver will do the PHY initialization and shutdown.
+ The PHY driver will be used by Marvell udc/ehci/otg driver.
+
+ To compile this driver as a module, choose M here.
diff --git a/drivers/phy/marvell/Makefile b/drivers/phy/marvell/Makefile
index 5c3ec5d10e0d..3975b144f8ec 100644
--- a/drivers/phy/marvell/Makefile
+++ b/drivers/phy/marvell/Makefile
@@ -6,3 +6,4 @@ obj-$(CONFIG_PHY_MVEBU_CP110_COMPHY) += phy-mvebu-cp110-comphy.o
obj-$(CONFIG_PHY_MVEBU_SATA) += phy-mvebu-sata.o
obj-$(CONFIG_PHY_PXA_28NM_HSIC) += phy-pxa-28nm-hsic.o
obj-$(CONFIG_PHY_PXA_28NM_USB2) += phy-pxa-28nm-usb2.o
+obj-$(CONFIG_PHY_PXA_USB) += phy-pxa-usb.o
diff --git a/drivers/phy/marvell/phy-pxa-usb.c b/drivers/phy/marvell/phy-pxa-usb.c
new file mode 100644
index 000000000000..87ff7550b912
--- /dev/null
+++ b/drivers/phy/marvell/phy-pxa-usb.c
@@ -0,0 +1,345 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2011 Marvell International Ltd. All rights reserved.
+ * Copyright (C) 2018 Lubomir Rintel <lkundrak@v3.sk>
+ */
+
+#include <dt-bindings/phy/phy.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+
+/* phy regs */
+#define UTMI_REVISION 0x0
+#define UTMI_CTRL 0x4
+#define UTMI_PLL 0x8
+#define UTMI_TX 0xc
+#define UTMI_RX 0x10
+#define UTMI_IVREF 0x14
+#define UTMI_T0 0x18
+#define UTMI_T1 0x1c
+#define UTMI_T2 0x20
+#define UTMI_T3 0x24
+#define UTMI_T4 0x28
+#define UTMI_T5 0x2c
+#define UTMI_RESERVE 0x30
+#define UTMI_USB_INT 0x34
+#define UTMI_DBG_CTL 0x38
+#define UTMI_OTG_ADDON 0x3c
+
+/* For UTMICTRL Register */
+#define UTMI_CTRL_USB_CLK_EN (1 << 31)
+/* pxa168 */
+#define UTMI_CTRL_SUSPEND_SET1 (1 << 30)
+#define UTMI_CTRL_SUSPEND_SET2 (1 << 29)
+#define UTMI_CTRL_RXBUF_PDWN (1 << 24)
+#define UTMI_CTRL_TXBUF_PDWN (1 << 11)
+
+#define UTMI_CTRL_INPKT_DELAY_SHIFT 30
+#define UTMI_CTRL_INPKT_DELAY_SOF_SHIFT 28
+#define UTMI_CTRL_PU_REF_SHIFT 20
+#define UTMI_CTRL_ARC_PULLDN_SHIFT 12
+#define UTMI_CTRL_PLL_PWR_UP_SHIFT 1
+#define UTMI_CTRL_PWR_UP_SHIFT 0
+
+/* For UTMI_PLL Register */
+#define UTMI_PLL_PLLCALI12_SHIFT 29
+#define UTMI_PLL_PLLCALI12_MASK (0x3 << 29)
+
+#define UTMI_PLL_PLLVDD18_SHIFT 27
+#define UTMI_PLL_PLLVDD18_MASK (0x3 << 27)
+
+#define UTMI_PLL_PLLVDD12_SHIFT 25
+#define UTMI_PLL_PLLVDD12_MASK (0x3 << 25)
+
+#define UTMI_PLL_CLK_BLK_EN_SHIFT 24
+#define CLK_BLK_EN (0x1 << 24)
+#define PLL_READY (0x1 << 23)
+#define KVCO_EXT (0x1 << 22)
+#define VCOCAL_START (0x1 << 21)
+
+#define UTMI_PLL_KVCO_SHIFT 15
+#define UTMI_PLL_KVCO_MASK (0x7 << 15)
+
+#define UTMI_PLL_ICP_SHIFT 12
+#define UTMI_PLL_ICP_MASK (0x7 << 12)
+
+#define UTMI_PLL_FBDIV_SHIFT 4
+#define UTMI_PLL_FBDIV_MASK (0xFF << 4)
+
+#define UTMI_PLL_REFDIV_SHIFT 0
+#define UTMI_PLL_REFDIV_MASK (0xF << 0)
+
+/* For UTMI_TX Register */
+#define UTMI_TX_REG_EXT_FS_RCAL_SHIFT 27
+#define UTMI_TX_REG_EXT_FS_RCAL_MASK (0xf << 27)
+
+#define UTMI_TX_REG_EXT_FS_RCAL_EN_SHIFT 26
+#define UTMI_TX_REG_EXT_FS_RCAL_EN_MASK (0x1 << 26)
+
+#define UTMI_TX_TXVDD12_SHIFT 22
+#define UTMI_TX_TXVDD12_MASK (0x3 << 22)
+
+#define UTMI_TX_CK60_PHSEL_SHIFT 17
+#define UTMI_TX_CK60_PHSEL_MASK (0xf << 17)
+
+#define UTMI_TX_IMPCAL_VTH_SHIFT 14
+#define UTMI_TX_IMPCAL_VTH_MASK (0x7 << 14)
+
+#define REG_RCAL_START (0x1 << 12)
+
+#define UTMI_TX_LOW_VDD_EN_SHIFT 11
+
+#define UTMI_TX_AMP_SHIFT 0
+#define UTMI_TX_AMP_MASK (0x7 << 0)
+
+/* For UTMI_RX Register */
+#define UTMI_REG_SQ_LENGTH_SHIFT 15
+#define UTMI_REG_SQ_LENGTH_MASK (0x3 << 15)
+
+#define UTMI_RX_SQ_THRESH_SHIFT 4
+#define UTMI_RX_SQ_THRESH_MASK (0xf << 4)
+
+#define UTMI_OTG_ADDON_OTG_ON (1 << 0)
+
+enum pxa_usb_phy_version {
+ PXA_USB_PHY_MMP2,
+ PXA_USB_PHY_PXA910,
+ PXA_USB_PHY_PXA168,
+};
+
+struct pxa_usb_phy {
+ struct phy *phy;
+ void __iomem *base;
+ enum pxa_usb_phy_version version;
+};
+
+/*****************************************************************************
+ * The registers read/write routines
+ *****************************************************************************/
+
+static unsigned int u2o_get(void __iomem *base, unsigned int offset)
+{
+ return readl_relaxed(base + offset);
+}
+
+static void u2o_set(void __iomem *base, unsigned int offset,
+ unsigned int value)
+{
+ u32 reg;
+
+ reg = readl_relaxed(base + offset);
+ reg |= value;
+ writel_relaxed(reg, base + offset);
+ readl_relaxed(base + offset);
+}
+
+static void u2o_clear(void __iomem *base, unsigned int offset,
+ unsigned int value)
+{
+ u32 reg;
+
+ reg = readl_relaxed(base + offset);
+ reg &= ~value;
+ writel_relaxed(reg, base + offset);
+ readl_relaxed(base + offset);
+}
+
+static void u2o_write(void __iomem *base, unsigned int offset,
+ unsigned int value)
+{
+ writel_relaxed(value, base + offset);
+ readl_relaxed(base + offset);
+}
+
+static int pxa_usb_phy_init(struct phy *phy)
+{
+ struct pxa_usb_phy *pxa_usb_phy = phy_get_drvdata(phy);
+ void __iomem *base = pxa_usb_phy->base;
+ int loops;
+
+ dev_info(&phy->dev, "initializing Marvell PXA USB PHY");
+
+ /* Initialize the USB PHY power */
+ if (pxa_usb_phy->version == PXA_USB_PHY_PXA910) {
+ u2o_set(base, UTMI_CTRL, (1<<UTMI_CTRL_INPKT_DELAY_SOF_SHIFT)
+ | (1<<UTMI_CTRL_PU_REF_SHIFT));
+ }
+
+ u2o_set(base, UTMI_CTRL, 1<<UTMI_CTRL_PLL_PWR_UP_SHIFT);
+ u2o_set(base, UTMI_CTRL, 1<<UTMI_CTRL_PWR_UP_SHIFT);
+
+ /* UTMI_PLL settings */
+ u2o_clear(base, UTMI_PLL, UTMI_PLL_PLLVDD18_MASK
+ | UTMI_PLL_PLLVDD12_MASK | UTMI_PLL_PLLCALI12_MASK
+ | UTMI_PLL_FBDIV_MASK | UTMI_PLL_REFDIV_MASK
+ | UTMI_PLL_ICP_MASK | UTMI_PLL_KVCO_MASK);
+
+ u2o_set(base, UTMI_PLL, 0xee<<UTMI_PLL_FBDIV_SHIFT
+ | 0xb<<UTMI_PLL_REFDIV_SHIFT | 3<<UTMI_PLL_PLLVDD18_SHIFT
+ | 3<<UTMI_PLL_PLLVDD12_SHIFT | 3<<UTMI_PLL_PLLCALI12_SHIFT
+ | 1<<UTMI_PLL_ICP_SHIFT | 3<<UTMI_PLL_KVCO_SHIFT);
+
+ /* UTMI_TX */
+ u2o_clear(base, UTMI_TX, UTMI_TX_REG_EXT_FS_RCAL_EN_MASK
+ | UTMI_TX_TXVDD12_MASK | UTMI_TX_CK60_PHSEL_MASK
+ | UTMI_TX_IMPCAL_VTH_MASK | UTMI_TX_REG_EXT_FS_RCAL_MASK
+ | UTMI_TX_AMP_MASK);
+ u2o_set(base, UTMI_TX, 3<<UTMI_TX_TXVDD12_SHIFT
+ | 4<<UTMI_TX_CK60_PHSEL_SHIFT | 4<<UTMI_TX_IMPCAL_VTH_SHIFT
+ | 8<<UTMI_TX_REG_EXT_FS_RCAL_SHIFT | 3<<UTMI_TX_AMP_SHIFT);
+
+ /* UTMI_RX */
+ u2o_clear(base, UTMI_RX, UTMI_RX_SQ_THRESH_MASK
+ | UTMI_REG_SQ_LENGTH_MASK);
+ u2o_set(base, UTMI_RX, 7<<UTMI_RX_SQ_THRESH_SHIFT
+ | 2<<UTMI_REG_SQ_LENGTH_SHIFT);
+
+ /* UTMI_IVREF */
+ if (pxa_usb_phy->version == PXA_USB_PHY_PXA168) {
+ /*
+ * fixing Microsoft Altair board interface with NEC hub issue -
+ * Set UTMI_IVREF from 0x4a3 to 0x4bf
+ */
+ u2o_write(base, UTMI_IVREF, 0x4bf);
+ }
+
+ /* toggle VCOCAL_START bit of UTMI_PLL */
+ udelay(200);
+ u2o_set(base, UTMI_PLL, VCOCAL_START);
+ udelay(40);
+ u2o_clear(base, UTMI_PLL, VCOCAL_START);
+
+ /* toggle REG_RCAL_START bit of UTMI_TX */
+ udelay(400);
+ u2o_set(base, UTMI_TX, REG_RCAL_START);
+ udelay(40);
+ u2o_clear(base, UTMI_TX, REG_RCAL_START);
+ udelay(400);
+
+ /* Make sure PHY PLL is ready */
+ loops = 0;
+ while ((u2o_get(base, UTMI_PLL) & PLL_READY) == 0) {
+ mdelay(1);
+ loops++;
+ if (loops > 100) {
+ dev_warn(&phy->dev, "calibrate timeout, UTMI_PLL %x\n",
+ u2o_get(base, UTMI_PLL));
+ break;
+ }
+ }
+
+ if (pxa_usb_phy->version == PXA_USB_PHY_PXA168) {
+ u2o_set(base, UTMI_RESERVE, 1 << 5);
+ /* Turn on UTMI PHY OTG extension */
+ u2o_write(base, UTMI_OTG_ADDON, 1);
+ }
+
+ return 0;
+
+}
+
+static int pxa_usb_phy_exit(struct phy *phy)
+{
+ struct pxa_usb_phy *pxa_usb_phy = phy_get_drvdata(phy);
+ void __iomem *base = pxa_usb_phy->base;
+
+ dev_info(&phy->dev, "deinitializing Marvell PXA USB PHY");
+
+ if (pxa_usb_phy->version == PXA_USB_PHY_PXA168)
+ u2o_clear(base, UTMI_OTG_ADDON, UTMI_OTG_ADDON_OTG_ON);
+
+ u2o_clear(base, UTMI_CTRL, UTMI_CTRL_RXBUF_PDWN);
+ u2o_clear(base, UTMI_CTRL, UTMI_CTRL_TXBUF_PDWN);
+ u2o_clear(base, UTMI_CTRL, UTMI_CTRL_USB_CLK_EN);
+ u2o_clear(base, UTMI_CTRL, 1<<UTMI_CTRL_PWR_UP_SHIFT);
+ u2o_clear(base, UTMI_CTRL, 1<<UTMI_CTRL_PLL_PWR_UP_SHIFT);
+
+ return 0;
+}
+
+static const struct phy_ops pxa_usb_phy_ops = {
+ .init = pxa_usb_phy_init,
+ .exit = pxa_usb_phy_exit,
+ .owner = THIS_MODULE,
+};
+
+static const struct of_device_id pxa_usb_phy_of_match[] = {
+ {
+ .compatible = "marvell,mmp2-usb-phy",
+ .data = (void *)PXA_USB_PHY_MMP2,
+ }, {
+ .compatible = "marvell,pxa910-usb-phy",
+ .data = (void *)PXA_USB_PHY_PXA910,
+ }, {
+ .compatible = "marvell,pxa168-usb-phy",
+ .data = (void *)PXA_USB_PHY_PXA168,
+ },
+ { },
+};
+MODULE_DEVICE_TABLE(of, pxa_usb_phy_of_match);
+
+static int pxa_usb_phy_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct resource *resource;
+ struct pxa_usb_phy *pxa_usb_phy;
+ struct phy_provider *provider;
+ const struct of_device_id *of_id;
+
+ pxa_usb_phy = devm_kzalloc(dev, sizeof(struct pxa_usb_phy), GFP_KERNEL);
+ if (!pxa_usb_phy)
+ return -ENOMEM;
+
+ of_id = of_match_node(pxa_usb_phy_of_match, dev->of_node);
+ if (of_id)
+ pxa_usb_phy->version = (enum pxa_usb_phy_version)of_id->data;
+ else
+ pxa_usb_phy->version = PXA_USB_PHY_MMP2;
+
+ resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ pxa_usb_phy->base = devm_ioremap_resource(dev, resource);
+ if (IS_ERR(pxa_usb_phy->base)) {
+ dev_err(dev, "failed to remap PHY regs\n");
+ return PTR_ERR(pxa_usb_phy->base);
+ }
+
+ pxa_usb_phy->phy = devm_phy_create(dev, NULL, &pxa_usb_phy_ops);
+ if (IS_ERR(pxa_usb_phy->phy)) {
+ dev_err(dev, "failed to create PHY\n");
+ return PTR_ERR(pxa_usb_phy->phy);
+ }
+
+ phy_set_drvdata(pxa_usb_phy->phy, pxa_usb_phy);
+ provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+ if (IS_ERR(provider)) {
+ dev_err(dev, "failed to register PHY provider\n");
+ return PTR_ERR(provider);
+ }
+
+ if (!dev->of_node) {
+ phy_create_lookup(pxa_usb_phy->phy, "usb", "mv-udc");
+ phy_create_lookup(pxa_usb_phy->phy, "usb", "pxa-u2oehci");
+ phy_create_lookup(pxa_usb_phy->phy, "usb", "mv-otg");
+ }
+
+ dev_info(dev, "Marvell PXA USB PHY");
+ return 0;
+}
+
+static struct platform_driver pxa_usb_phy_driver = {
+ .probe = pxa_usb_phy_probe,
+ .driver = {
+ .name = "pxa-usb-phy",
+ .of_match_table = pxa_usb_phy_of_match,
+ },
+};
+module_platform_driver(pxa_usb_phy_driver);
+
+MODULE_AUTHOR("Lubomir Rintel <lkundrak@v3.sk>");
+MODULE_DESCRIPTION("Marvell PXA USB PHY Driver");
+MODULE_LICENSE("GPL v2");