diff options
| -rw-r--r-- | drivers/gpu/drm/radeon/atombios.h | 127 |
1 files changed, 115 insertions, 12 deletions
diff --git a/drivers/gpu/drm/radeon/atombios.h b/drivers/gpu/drm/radeon/atombios.h index af10f8571d87..92be50c39ffd 100644 --- a/drivers/gpu/drm/radeon/atombios.h +++ b/drivers/gpu/drm/radeon/atombios.h @@ -1711,7 +1711,9 @@ typedef struct _PIXEL_CLOCK_PARAMETERS_V6 #define PIXEL_CLOCK_V6_MISC_HDMI_BPP_MASK 0x0c #define PIXEL_CLOCK_V6_MISC_HDMI_24BPP 0x00 #define PIXEL_CLOCK_V6_MISC_HDMI_36BPP 0x04 +#define PIXEL_CLOCK_V6_MISC_HDMI_36BPP_V6 0x08 //for V6, the correct defintion for 36bpp should be 2 for 36bpp(2:1) #define PIXEL_CLOCK_V6_MISC_HDMI_30BPP 0x08 +#define PIXEL_CLOCK_V6_MISC_HDMI_30BPP_V6 0x04 //for V6, the correct defintion for 30bpp should be 1 for 36bpp(5:4) #define PIXEL_CLOCK_V6_MISC_HDMI_48BPP 0x0c #define PIXEL_CLOCK_V6_MISC_REF_DIV_SRC 0x10 #define PIXEL_CLOCK_V6_MISC_GEN_DPREFCLK 0x40 @@ -2223,7 +2225,7 @@ typedef struct _SET_VOLTAGE_PARAMETERS_V2 USHORT usVoltageLevel; // real voltage level }SET_VOLTAGE_PARAMETERS_V2; - +// used by both SetVoltageTable v1.3 and v1.4 typedef struct _SET_VOLTAGE_PARAMETERS_V1_3 { UCHAR ucVoltageType; // To tell which voltage to set up, VDDC/MVDDC/MVDDQ/VDDCI @@ -2290,15 +2292,36 @@ typedef struct _GET_LEAKAGE_VOLTAGE_INFO_OUTPUT_PARAMETER_V1_1 #define ATOM_GET_VOLTAGE_VID 0x00 #define ATOM_GET_VOTLAGE_INIT_SEQ 0x03 #define ATOM_GET_VOLTTAGE_PHASE_PHASE_VID 0x04 -// for SI, this state map to 0xff02 voltage state in Power Play table, which is power boost state -#define ATOM_GET_VOLTAGE_STATE0_LEAKAGE_VID 0x10 +#define ATOM_GET_VOLTAGE_SVID2 0x07 //Get SVI2 Regulator Info +// for SI, this state map to 0xff02 voltage state in Power Play table, which is power boost state +#define ATOM_GET_VOLTAGE_STATE0_LEAKAGE_VID 0x10 // for SI, this state map to 0xff01 voltage state in Power Play table, which is performance state #define ATOM_GET_VOLTAGE_STATE1_LEAKAGE_VID 0x11 -// undefined power state + #define ATOM_GET_VOLTAGE_STATE2_LEAKAGE_VID 0x12 #define ATOM_GET_VOLTAGE_STATE3_LEAKAGE_VID 0x13 +// New Added from CI Hawaii for GetVoltageInfoTable, input parameter structure +typedef struct _GET_VOLTAGE_INFO_INPUT_PARAMETER_V1_2 +{ + UCHAR ucVoltageType; // Input: To tell which voltage to set up, VDDC/MVDDC/MVDDQ/VDDCI + UCHAR ucVoltageMode; // Input: Indicate action: Get voltage info + USHORT usVoltageLevel; // Input: real voltage level in unit of mv or Voltage Phase (0, 1, 2, .. ) or Leakage Id + ULONG ulSCLKFreq; // Input: when ucVoltageMode= ATOM_GET_VOLTAGE_EVV_VOLTAGE, DPM state SCLK frequency, Define in PPTable SCLK/Voltage dependence table +}GET_VOLTAGE_INFO_INPUT_PARAMETER_V1_2; + +// New in GetVoltageInfo v1.2 ucVoltageMode +#define ATOM_GET_VOLTAGE_EVV_VOLTAGE 0x09 + +// New Added from CI Hawaii for EVV feature +typedef struct _GET_EVV_VOLTAGE_INFO_OUTPUT_PARAMETER_V1_2 +{ + USHORT usVoltageLevel; // real voltage level in unit of mv + USHORT usVoltageId; // Voltage Id programmed in Voltage Regulator + ULONG ulReseved; +}GET_EVV_VOLTAGE_INFO_OUTPUT_PARAMETER_V1_2; + /****************************************************************************/ // Structures used by TVEncoderControlTable /****************************************************************************/ @@ -3864,6 +3887,8 @@ typedef struct _ATOM_GPIO_PIN_ASSIGNMENT #define PP_AC_DC_SWITCH_GPIO_PINID 60 //from SMU7.x, if ucGPIO_ID=VDDC_REGULATOR_VRHOT_GPIO_PINID in GPIO_LUTable, VRHot feature is enable #define VDDC_VRHOT_GPIO_PINID 61 +//if ucGPIO_ID=VDDC_PCC_GPIO_PINID in GPIO_LUTable, Peak Current Control feature is enabled +#define VDDC_PCC_GPIO_PINID 62 typedef struct _ATOM_GPIO_PIN_LUT { @@ -4169,10 +4194,10 @@ typedef struct _ATOM_COMMON_RECORD_HEADER #define ATOM_OBJECT_LINK_RECORD_TYPE 18 //Once this record is present under one object, it indicats the oobject is linked to another obj described by the record #define ATOM_CONNECTOR_REMOTE_CAP_RECORD_TYPE 19 #define ATOM_ENCODER_CAP_RECORD_TYPE 20 - +#define ATOM_BRACKET_LAYOUT_RECORD_TYPE 21 //Must be updated when new record type is added,equal to that record definition! -#define ATOM_MAX_OBJECT_RECORD_NUMBER ATOM_ENCODER_CAP_RECORD_TYPE +#define ATOM_MAX_OBJECT_RECORD_NUMBER ATOM_BRACKET_LAYOUT_RECORD_TYPE typedef struct _ATOM_I2C_RECORD { @@ -4397,6 +4422,31 @@ typedef struct _ATOM_CONNECTOR_REMOTE_CAP_RECORD USHORT usReserved; }ATOM_CONNECTOR_REMOTE_CAP_RECORD; +typedef struct _ATOM_CONNECTOR_LAYOUT_INFO +{ + USHORT usConnectorObjectId; + UCHAR ucConnectorType; + UCHAR ucPosition; +}ATOM_CONNECTOR_LAYOUT_INFO; + +// define ATOM_CONNECTOR_LAYOUT_INFO.ucConnectorType to describe the display connector size +#define CONNECTOR_TYPE_DVI_D 1 +#define CONNECTOR_TYPE_DVI_I 2 +#define CONNECTOR_TYPE_VGA 3 +#define CONNECTOR_TYPE_HDMI 4 +#define CONNECTOR_TYPE_DISPLAY_PORT 5 +#define CONNECTOR_TYPE_MINI_DISPLAY_PORT 6 + +typedef struct _ATOM_BRACKET_LAYOUT_RECORD +{ + ATOM_COMMON_RECORD_HEADER sheader; + UCHAR ucLength; + UCHAR ucWidth; + UCHAR ucConnNum; + UCHAR ucReserved; + ATOM_CONNECTOR_LAYOUT_INFO asConnInfo[1]; +}ATOM_BRACKET_LAYOUT_RECORD; + /****************************************************************************/ // ASIC voltage data table /****************************************************************************/ @@ -4524,8 +4574,9 @@ typedef struct _ATOM_VOLTAGE_OBJECT_HEADER_V3{ #define VOLTAGE_OBJ_VR_I2C_INIT_SEQ 3 //VOLTAGE REGULATOR INIT sequece through I2C -> ATOM_I2C_VOLTAGE_OBJECT_V3 #define VOLTAGE_OBJ_PHASE_LUT 4 //Set Vregulator Phase lookup table ->ATOM_GPIO_VOLTAGE_OBJECT_V3 #define VOLTAGE_OBJ_SVID2 7 //Indicate voltage control by SVID2 ->ATOM_SVID2_VOLTAGE_OBJECT_V3 -#define VOLTAGE_OBJ_PWRBOOST_LEAKAGE_LUT 0x10 //Powerboost Voltage and LeakageId lookup table->ATOM_LEAKAGE_VOLTAGE_OBJECT_V3 -#define VOLTAGE_OBJ_HIGH_STATE_LEAKAGE_LUT 0x11 //High voltage state Voltage and LeakageId lookup table->ATOM_LEAKAGE_VOLTAGE_OBJECT_V3 +#define VOLTAGE_OBJ_EVV 8 +#define VOLTAGE_OBJ_PWRBOOST_LEAKAGE_LUT 0x10 //Powerboost Voltage and LeakageId lookup table->ATOM_LEAKAGE_VOLTAGE_OBJECT_V3 +#define VOLTAGE_OBJ_HIGH_STATE_LEAKAGE_LUT 0x11 //High voltage state Voltage and LeakageId lookup table->ATOM_LEAKAGE_VOLTAGE_OBJECT_V3 #define VOLTAGE_OBJ_HIGH1_STATE_LEAKAGE_LUT 0x12 //High1 voltage state Voltage and LeakageId lookup table->ATOM_LEAKAGE_VOLTAGE_OBJECT_V3 typedef struct _VOLTAGE_LUT_ENTRY_V2 @@ -4552,6 +4603,10 @@ typedef struct _ATOM_I2C_VOLTAGE_OBJECT_V3 VOLTAGE_LUT_ENTRY asVolI2cLut[1]; // end with 0xff }ATOM_I2C_VOLTAGE_OBJECT_V3; +// ATOM_I2C_VOLTAGE_OBJECT_V3.ucVoltageControlFlag +#define VOLTAGE_DATA_ONE_BYTE 0 +#define VOLTAGE_DATA_TWO_BYTE 1 + typedef struct _ATOM_GPIO_VOLTAGE_OBJECT_V3 { ATOM_VOLTAGE_OBJECT_HEADER_V3 sHeader; // voltage mode = VOLTAGE_OBJ_GPIO_LUT or VOLTAGE_OBJ_PHASE_LUT @@ -4584,7 +4639,8 @@ typedef struct _ATOM_SVID2_VOLTAGE_OBJECT_V3 // 1:0 offset trim, USHORT usLoadLine_PSI; // GPU GPIO pin Id to SVID2 regulator VRHot pin. possible value 0~31. 0 means GPIO0, 31 means GPIO31 - UCHAR ucReserved[2]; + UCHAR ucSVDGpioId; //0~31 indicate GPIO0~31 + UCHAR ucSVCGpioId; //0~31 indicate GPIO0~31 ULONG ulReserved; }ATOM_SVID2_VOLTAGE_OBJECT_V3; @@ -4637,6 +4693,49 @@ typedef struct _ATOM_ASIC_PROFILING_INFO_V2_1 USHORT usElbVDDCI_LevelArrayOffset; // offset of 2 dimension voltage level USHORT array }ATOM_ASIC_PROFILING_INFO_V2_1; +typedef struct _ATOM_ASIC_PROFILING_INFO_V3_1 +{ + ATOM_COMMON_TABLE_HEADER asHeader; + ULONG ulEvvDerateTdp; + ULONG ulEvvDerateTdc; + ULONG ulBoardCoreTemp; + ULONG ulMaxVddc; + ULONG ulMinVddc; + ULONG ulLoadLineSlop; + ULONG ulLeakageTemp; + ULONG ulLeakageVoltage; + ULONG ulCACmEncodeRange; + ULONG ulCACmEncodeAverage; + ULONG ulCACbEncodeRange; + ULONG ulCACbEncodeAverage; + ULONG ulKt_bEncodeRange; + ULONG ulKt_bEncodeAverage; + ULONG ulKv_mEncodeRange; + ULONG ulKv_mEncodeAverage; + ULONG ulKv_bEncodeRange; + ULONG ulKv_bEncodeAverage; + ULONG ulLkgEncodeLn_MaxDivMin; + ULONG ulLkgEncodeMin; + ULONG ulEfuseLogisticAlpha; + USHORT usPowerDpm0; + USHORT usCurrentDpm0; + USHORT usPowerDpm1; + USHORT usCurrentDpm1; + USHORT usPowerDpm2; + USHORT usCurrentDpm2; + USHORT usPowerDpm3; + USHORT usCurrentDpm3; + USHORT usPowerDpm4; + USHORT usCurrentDpm4; + USHORT usPowerDpm5; + USHORT usCurrentDpm5; + USHORT usPowerDpm6; + USHORT usCurrentDpm6; + USHORT usPowerDpm7; + USHORT usCurrentDpm7; +}ATOM_ASIC_PROFILING_INFO_V3_1; + + typedef struct _ATOM_POWER_SOURCE_OBJECT { UCHAR ucPwrSrcId; // Power source @@ -5808,6 +5907,8 @@ typedef struct _ATOM_ASIC_INTERNAL_SS_INFO_V3 #define ATOM_S7_DOS_MODE_PIXEL_DEPTHb0 0x0C #define ATOM_S7_DOS_MODE_PIXEL_FORMATb0 0xF0 #define ATOM_S7_DOS_8BIT_DAC_ENb1 0x01 +#define ATOM_S7_ASIC_INIT_COMPLETEb1 0x02 +#define ATOM_S7_ASIC_INIT_COMPLETE_MASK 0x00000200 #define ATOM_S7_DOS_MODE_NUMBERw1 0x0FFFF #define ATOM_S7_DOS_8BIT_DAC_EN_SHIFT 8 @@ -6242,6 +6343,7 @@ typedef struct _ATOM_MC_INIT_PARAM_TABLE #define _128Mx32 0x53 #define _256Mx8 0x61 #define _256Mx16 0x62 +#define _512Mx8 0x71 #define SAMSUNG 0x1 #define INFINEON 0x2 @@ -6987,9 +7089,10 @@ typedef struct _ATOM_DISP_OUT_INFO_V3 UCHAR ucMaxDispEngineNum; UCHAR ucMaxActiveDispEngineNum; UCHAR ucMaxPPLLNum; - UCHAR ucCoreRefClkSource; // value of CORE_REF_CLK_SOURCE - UCHAR ucReserved[3]; - ASIC_TRANSMITTER_INFO_V2 asTransmitterInfo[1]; // for alligment only + UCHAR ucCoreRefClkSource; // value of CORE_REF_CLK_SOURCE + UCHAR ucDispCaps; + UCHAR ucReserved[2]; + ASIC_TRANSMITTER_INFO_V2 asTransmitterInfo[1]; // for alligment only }ATOM_DISP_OUT_INFO_V3; //ucDispCaps |