diff options
| -rw-r--r-- | Documentation/devicetree/bindings/display/msm/hdmi.txt | 9 | ||||
| -rw-r--r-- | drivers/gpu/drm/msm/hdmi/hdmi.c | 21 |
2 files changed, 23 insertions, 7 deletions
diff --git a/Documentation/devicetree/bindings/display/msm/hdmi.txt b/Documentation/devicetree/bindings/display/msm/hdmi.txt index b63f614e0c04..2ad578984fcf 100644 --- a/Documentation/devicetree/bindings/display/msm/hdmi.txt +++ b/Documentation/devicetree/bindings/display/msm/hdmi.txt @@ -14,17 +14,16 @@ Required properties: - power-domains: Should be <&mmcc MDSS_GDSC>. - clocks: device clocks See ../clocks/clock-bindings.txt for details. -- qcom,hdmi-tx-ddc-clk-gpio: ddc clk pin -- qcom,hdmi-tx-ddc-data-gpio: ddc data pin -- qcom,hdmi-tx-hpd-gpio: hpd pin - core-vdda-supply: phandle to supply regulator - hdmi-mux-supply: phandle to mux regulator - phys: the phandle for the HDMI PHY device - phy-names: the name of the corresponding PHY device Optional properties: -- qcom,hdmi-tx-mux-en-gpio: hdmi mux enable pin -- qcom,hdmi-tx-mux-sel-gpio: hdmi mux select pin +- hpd-gpios: hpd pin +- qcom,hdmi-tx-mux-en-gpios: hdmi mux enable pin +- qcom,hdmi-tx-mux-sel-gpios: hdmi mux select pin +- qcom,hdmi-tx-mux-lpm-gpios: hdmi mux lpm pin - power-domains: reference to the power domain(s), if available. - pinctrl-names: the pin control state names; should contain "default" - pinctrl-0: the default pinctrl state (active) diff --git a/drivers/gpu/drm/msm/hdmi/hdmi.c b/drivers/gpu/drm/msm/hdmi/hdmi.c index 973720792236..a968cad509c2 100644 --- a/drivers/gpu/drm/msm/hdmi/hdmi.c +++ b/drivers/gpu/drm/msm/hdmi/hdmi.c @@ -422,12 +422,29 @@ static const struct { static int msm_hdmi_get_gpio(struct device_node *of_node, const char *name) { - int gpio = of_get_named_gpio(of_node, name, 0); + int gpio; + + /* try with the gpio names as in the table (downstream bindings) */ + gpio = of_get_named_gpio(of_node, name, 0); if (gpio < 0) { char name2[32]; - snprintf(name2, sizeof(name2), "%s-gpio", name); + + /* try with the gpio names as in the upstream bindings */ + snprintf(name2, sizeof(name2), "%s-gpios", name); gpio = of_get_named_gpio(of_node, name2, 0); if (gpio < 0) { + char name3[32]; + + /* + * try again after stripping out the "qcom,hdmi-tx" + * prefix. This is mainly to match "hpd-gpios" used + * in the upstream bindings + */ + if (sscanf(name2, "qcom,hdmi-tx-%s", name3)) + gpio = of_get_named_gpio(of_node, name3, 0); + } + + if (gpio < 0) { DBG("failed to get gpio: %s (%d)", name, gpio); gpio = -1; } |