summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--Documentation/pci.txt4
-rw-r--r--drivers/base/dd.c41
-rw-r--r--drivers/pci/Kconfig25
-rw-r--r--drivers/pci/pci-driver.c15
-rw-r--r--include/linux/device.h1
5 files changed, 3 insertions, 83 deletions
diff --git a/Documentation/pci.txt b/Documentation/pci.txt
index a8ded1a8bd62..40c4717d236b 100644
--- a/Documentation/pci.txt
+++ b/Documentation/pci.txt
@@ -124,10 +124,6 @@ initialization with a pointer to a structure describing the driver
err_handler See Documentation/pci-error-recovery.txt
- multithread_probe Enable multi-threaded probe/scan. Driver must
- provide its own locking/syncronization for init
- operations if this is enabled.
-
The ID table is an array of struct pci_device_id entries ending with an
all-zero entry. Each entry consists of:
diff --git a/drivers/base/dd.c b/drivers/base/dd.c
index 18dba8e78da7..92428e55b0c2 100644
--- a/drivers/base/dd.c
+++ b/drivers/base/dd.c
@@ -226,12 +226,10 @@ static int device_probe_drivers(void *data)
*
* Walk the list of drivers that the bus has and call
* driver_probe_device() for each pair. If a compatible
- * pair is found, break out and return. If the bus specifies
- * multithreaded probing, walking the list of drivers is done
- * on a probing thread.
+ * pair is found, break out and return.
*
* Returns 1 if the device was bound to a driver;
- * 0 if no matching device was found or multithreaded probing is done;
+ * 0 if no matching device was found;
* -ENODEV if the device is not registered.
*
* When called for a USB interface, @dev->parent->sem must be held.
@@ -239,7 +237,6 @@ static int device_probe_drivers(void *data)
int device_attach(struct device * dev)
{
int ret = 0;
- struct task_struct *probe_task = ERR_PTR(-ENOMEM);
down(&dev->sem);
if (dev->driver) {
@@ -251,12 +248,7 @@ int device_attach(struct device * dev)
ret = 0;
}
} else {
- if (dev->bus->multithread_probe)
- probe_task = kthread_run(device_probe_drivers, dev,
- "probe-%s", dev->bus_id);
- if(IS_ERR(probe_task))
- ret = bus_for_each_drv(dev->bus, NULL, dev,
- __device_attach);
+ ret = bus_for_each_drv(dev->bus, NULL, dev, __device_attach);
}
up(&dev->sem);
return ret;
@@ -383,33 +375,6 @@ void driver_detach(struct device_driver * drv)
}
}
-#ifdef CONFIG_PCI_MULTITHREAD_PROBE
-static int __init wait_for_probes(void)
-{
- DEFINE_WAIT(wait);
-
- printk(KERN_INFO "%s: waiting for %d threads\n", __FUNCTION__,
- atomic_read(&probe_count));
- if (!atomic_read(&probe_count))
- return 0;
- while (atomic_read(&probe_count)) {
- prepare_to_wait(&probe_waitqueue, &wait, TASK_UNINTERRUPTIBLE);
- if (atomic_read(&probe_count))
- schedule();
- }
- finish_wait(&probe_waitqueue, &wait);
- return 0;
-}
-
-core_initcall_sync(wait_for_probes);
-postcore_initcall_sync(wait_for_probes);
-arch_initcall_sync(wait_for_probes);
-subsys_initcall_sync(wait_for_probes);
-fs_initcall_sync(wait_for_probes);
-device_initcall_sync(wait_for_probes);
-late_initcall_sync(wait_for_probes);
-#endif
-
EXPORT_SYMBOL_GPL(device_bind_driver);
EXPORT_SYMBOL_GPL(device_release_driver);
EXPORT_SYMBOL_GPL(device_attach);
diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig
index 70efe8f285a6..7a1d6d512837 100644
--- a/drivers/pci/Kconfig
+++ b/drivers/pci/Kconfig
@@ -21,31 +21,6 @@ config PCI_MSI
If you don't know what to do here, say N.
-config PCI_MULTITHREAD_PROBE
- bool "PCI Multi-threaded probe (EXPERIMENTAL)"
- depends on PCI && EXPERIMENTAL && BROKEN
- help
- Say Y here if you want the PCI core to spawn a new thread for
- every PCI device that is probed. This can cause a huge
- speedup in boot times on multiprocessor machines, and even a
- smaller speedup on single processor machines.
-
- But it can also cause lots of bad things to happen. A number
- of PCI drivers cannot properly handle running in this way,
- some will just not work properly at all, while others might
- decide to blow up power supplies with a huge load all at once,
- so use this option at your own risk.
-
- It is very unwise to use this option if you are not using a
- boot process that can handle devices being created in any
- order. A program that can create persistent block and network
- device names (like udev) is a good idea if you wish to use
- this option.
-
- Again, use this option at your own risk, you have been warned!
-
- When in doubt, say N.
-
config PCI_DEBUG
bool "PCI Debugging"
depends on PCI && DEBUG_KERNEL
diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
index 07fdb3cd6172..3bb7739d26a5 100644
--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -14,20 +14,6 @@
#include "pci.h"
/*
- * Registration of PCI drivers and handling of hot-pluggable devices.
- */
-
-/* multithreaded probe logic */
-static int pci_multithread_probe =
-#ifdef CONFIG_PCI_MULTITHREAD_PROBE
- 1;
-#else
- 0;
-#endif
-__module_param_call("", pci_multithread_probe, param_set_bool, param_get_bool, &pci_multithread_probe, 0644);
-
-
-/*
* Dynamic device IDs are disabled for !CONFIG_HOTPLUG
*/
@@ -569,7 +555,6 @@ struct bus_type pci_bus_type = {
static int __init pci_driver_init(void)
{
- pci_bus_type.multithread_probe = pci_multithread_probe;
return bus_register(&pci_bus_type);
}
diff --git a/include/linux/device.h b/include/linux/device.h
index a0cd2ced31a9..ff83b61d283d 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -80,7 +80,6 @@ struct bus_type {
int (*resume)(struct device * dev);
unsigned int drivers_autoprobe:1;
- unsigned int multithread_probe:1;
};
extern int __must_check bus_register(struct bus_type * bus);