diff options
25 files changed, 775 insertions, 239 deletions
diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt index 636630fb92d7..8e5265e9f658 100644 --- a/Documentation/devicetree/bindings/usb/dwc3.txt +++ b/Documentation/devicetree/bindings/usb/dwc3.txt @@ -37,7 +37,11 @@ Optional properties: - phy-names: from the *Generic PHY* bindings; supported names are "usb2-phy" or "usb3-phy". - resets: a single pair of phandle and reset specifier + - snps,usb2-lpm-disable: indicate if we don't want to enable USB2 HW LPM - snps,usb3_lpm_capable: determines if platform is USB3 LPM capable + - snps,dis-start-transfer-quirk: when set, disable isoc START TRANSFER command + failure SW work-around for DWC_usb31 version 1.70a-ea06 + and prior. - snps,disable_scramble_quirk: true when SW should disable data scrambling. Only really useful for FPGA builds. - snps,has-lpm-erratum: true when DWC3 was configured with LPM Erratum enabled diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c index 2d6d2c8244de..68ad75a7460d 100644 --- a/drivers/usb/dwc2/gadget.c +++ b/drivers/usb/dwc2/gadget.c @@ -262,7 +262,7 @@ static void dwc2_gadget_wkup_alert_handler(struct dwc2_hsotg *hsotg) if (gintsts2 & GINTSTS2_WKUP_ALERT_INT) { dev_dbg(hsotg->dev, "%s: Wkup_Alert_Int\n", __func__); dwc2_clear_bit(hsotg, GINTSTS2, GINTSTS2_WKUP_ALERT_INT); - dwc2_set_bit(hsotg, DCFG, DCTL_RMTWKUPSIG); + dwc2_set_bit(hsotg, DCTL, DCTL_RMTWKUPSIG); } } @@ -3165,8 +3165,6 @@ static void kill_all_requests(struct dwc2_hsotg *hsotg, dwc2_hsotg_txfifo_flush(hsotg, ep->fifo_index); } -static int dwc2_hsotg_ep_disable(struct usb_ep *ep); - /** * dwc2_hsotg_disconnect - disconnect service * @hsotg: The device state. @@ -3188,9 +3186,11 @@ void dwc2_hsotg_disconnect(struct dwc2_hsotg *hsotg) /* all endpoints should be shutdown */ for (ep = 0; ep < hsotg->num_of_eps; ep++) { if (hsotg->eps_in[ep]) - dwc2_hsotg_ep_disable(&hsotg->eps_in[ep]->ep); + kill_all_requests(hsotg, hsotg->eps_in[ep], + -ESHUTDOWN); if (hsotg->eps_out[ep]) - dwc2_hsotg_ep_disable(&hsotg->eps_out[ep]->ep); + kill_all_requests(hsotg, hsotg->eps_out[ep], + -ESHUTDOWN); } call_gadget(hsotg, disconnect); @@ -3234,6 +3234,7 @@ static void dwc2_hsotg_irq_fifoempty(struct dwc2_hsotg *hsotg, bool periodic) GINTSTS_PTXFEMP | \ GINTSTS_RXFLVL) +static int dwc2_hsotg_ep_disable(struct usb_ep *ep); /** * dwc2_hsotg_core_init - issue softreset to the core * @hsotg: The device state @@ -4069,10 +4070,8 @@ static int dwc2_hsotg_ep_disable(struct usb_ep *ep) struct dwc2_hsotg *hsotg = hs_ep->parent; int dir_in = hs_ep->dir_in; int index = hs_ep->index; - unsigned long flags; u32 epctrl_reg; u32 ctrl; - int locked; dev_dbg(hsotg->dev, "%s(ep %p)\n", __func__, ep); @@ -4088,10 +4087,6 @@ static int dwc2_hsotg_ep_disable(struct usb_ep *ep) epctrl_reg = dir_in ? DIEPCTL(index) : DOEPCTL(index); - locked = spin_is_locked(&hsotg->lock); - if (!locked) - spin_lock_irqsave(&hsotg->lock, flags); - ctrl = dwc2_readl(hsotg, epctrl_reg); if (ctrl & DXEPCTL_EPENA) @@ -4114,12 +4109,22 @@ static int dwc2_hsotg_ep_disable(struct usb_ep *ep) hs_ep->fifo_index = 0; hs_ep->fifo_size = 0; - if (!locked) - spin_unlock_irqrestore(&hsotg->lock, flags); - return 0; } +static int dwc2_hsotg_ep_disable_lock(struct usb_ep *ep) +{ + struct dwc2_hsotg_ep *hs_ep = our_ep(ep); + struct dwc2_hsotg *hsotg = hs_ep->parent; + unsigned long flags; + int ret; + + spin_lock_irqsave(&hsotg->lock, flags); + ret = dwc2_hsotg_ep_disable(ep); + spin_unlock_irqrestore(&hsotg->lock, flags); + return ret; +} + /** * on_list - check request is on the given endpoint * @ep: The endpoint to check. @@ -4267,7 +4272,7 @@ static int dwc2_hsotg_ep_sethalt_lock(struct usb_ep *ep, int value) static const struct usb_ep_ops dwc2_hsotg_ep_ops = { .enable = dwc2_hsotg_ep_enable, - .disable = dwc2_hsotg_ep_disable, + .disable = dwc2_hsotg_ep_disable_lock, .alloc_request = dwc2_hsotg_ep_alloc_request, .free_request = dwc2_hsotg_ep_free_request, .queue = dwc2_hsotg_ep_queue_lock, @@ -4407,9 +4412,9 @@ static int dwc2_hsotg_udc_stop(struct usb_gadget *gadget) /* all endpoints should be shutdown */ for (ep = 1; ep < hsotg->num_of_eps; ep++) { if (hsotg->eps_in[ep]) - dwc2_hsotg_ep_disable(&hsotg->eps_in[ep]->ep); + dwc2_hsotg_ep_disable_lock(&hsotg->eps_in[ep]->ep); if (hsotg->eps_out[ep]) - dwc2_hsotg_ep_disable(&hsotg->eps_out[ep]->ep); + dwc2_hsotg_ep_disable_lock(&hsotg->eps_out[ep]->ep); } spin_lock_irqsave(&hsotg->lock, flags); @@ -4857,9 +4862,9 @@ int dwc2_hsotg_suspend(struct dwc2_hsotg *hsotg) for (ep = 0; ep < hsotg->num_of_eps; ep++) { if (hsotg->eps_in[ep]) - dwc2_hsotg_ep_disable(&hsotg->eps_in[ep]->ep); + dwc2_hsotg_ep_disable_lock(&hsotg->eps_in[ep]->ep); if (hsotg->eps_out[ep]) - dwc2_hsotg_ep_disable(&hsotg->eps_out[ep]->ep); + dwc2_hsotg_ep_disable_lock(&hsotg->eps_out[ep]->ep); } } @@ -5026,6 +5031,7 @@ void dwc2_gadget_init_lpm(struct dwc2_hsotg *hsotg) val |= hsotg->params.lpm_clock_gating ? GLPMCFG_ENBLSLPM : 0; val |= hsotg->params.hird_threshold << GLPMCFG_HIRD_THRES_SHIFT; val |= hsotg->params.besl ? GLPMCFG_ENBESL : 0; + val |= GLPMCFG_LPM_ACCEPT_CTRL_ISOC; dwc2_writel(hsotg, val, GLPMCFG); dev_dbg(hsotg->dev, "GLPMCFG=0x%08x\n", dwc2_readl(hsotg, GLPMCFG)); diff --git a/drivers/usb/dwc2/hcd.h b/drivers/usb/dwc2/hcd.h index 3f9bccc95add..c089ffa1f0a8 100644 --- a/drivers/usb/dwc2/hcd.h +++ b/drivers/usb/dwc2/hcd.h @@ -366,7 +366,7 @@ struct dwc2_qh { u32 desc_list_sz; u32 *n_bytes; struct timer_list unreserve_timer; - struct timer_list wait_timer; + struct hrtimer wait_timer; struct dwc2_tt *dwc_tt; int ttport; unsigned tt_buffer_dirty:1; diff --git a/drivers/usb/dwc2/hcd_queue.c b/drivers/usb/dwc2/hcd_queue.c index 40839591d2ec..ea3aa640c15c 100644 --- a/drivers/usb/dwc2/hcd_queue.c +++ b/drivers/usb/dwc2/hcd_queue.c @@ -59,7 +59,7 @@ #define DWC2_UNRESERVE_DELAY (msecs_to_jiffies(5)) /* If we get a NAK, wait this long before retrying */ -#define DWC2_RETRY_WAIT_DELAY (msecs_to_jiffies(1)) +#define DWC2_RETRY_WAIT_DELAY 1*1E6L /** * dwc2_periodic_channel_available() - Checks that a channel is available for a @@ -1464,10 +1464,12 @@ static void dwc2_deschedule_periodic(struct dwc2_hsotg *hsotg, * qh back to the "inactive" list, then queues transactions. * * @t: Pointer to wait_timer in a qh. + * + * Return: HRTIMER_NORESTART to not automatically restart this timer. */ -static void dwc2_wait_timer_fn(struct timer_list *t) +static enum hrtimer_restart dwc2_wait_timer_fn(struct hrtimer *t) { - struct dwc2_qh *qh = from_timer(qh, t, wait_timer); + struct dwc2_qh *qh = container_of(t, struct dwc2_qh, wait_timer); struct dwc2_hsotg *hsotg = qh->hsotg; unsigned long flags; @@ -1491,6 +1493,7 @@ static void dwc2_wait_timer_fn(struct timer_list *t) } spin_unlock_irqrestore(&hsotg->lock, flags); + return HRTIMER_NORESTART; } /** @@ -1521,7 +1524,8 @@ static void dwc2_qh_init(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh, /* Initialize QH */ qh->hsotg = hsotg; timer_setup(&qh->unreserve_timer, dwc2_unreserve_timer_fn, 0); - timer_setup(&qh->wait_timer, dwc2_wait_timer_fn, 0); + hrtimer_init(&qh->wait_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL); + qh->wait_timer.function = &dwc2_wait_timer_fn; qh->ep_type = ep_type; qh->ep_is_in = ep_is_in; @@ -1690,7 +1694,7 @@ void dwc2_hcd_qh_free(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh) * won't do anything anyway, but we want it to finish before we free * memory. */ - del_timer_sync(&qh->wait_timer); + hrtimer_cancel(&qh->wait_timer); dwc2_host_put_tt_info(hsotg, qh->dwc_tt); @@ -1716,6 +1720,7 @@ int dwc2_hcd_qh_add(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh) { int status; u32 intr_mask; + ktime_t delay; if (dbg_qh(qh)) dev_vdbg(hsotg->dev, "%s()\n", __func__); @@ -1734,8 +1739,8 @@ int dwc2_hcd_qh_add(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh) list_add_tail(&qh->qh_list_entry, &hsotg->non_periodic_sched_waiting); qh->wait_timer_cancel = false; - mod_timer(&qh->wait_timer, - jiffies + DWC2_RETRY_WAIT_DELAY + 1); + delay = ktime_set(0, DWC2_RETRY_WAIT_DELAY); + hrtimer_start(&qh->wait_timer, delay, HRTIMER_MODE_REL); } else { list_add_tail(&qh->qh_list_entry, &hsotg->non_periodic_sched_inactive); diff --git a/drivers/usb/dwc2/hw.h b/drivers/usb/dwc2/hw.h index 2b1ea441b7d4..98af924a9a5c 100644 --- a/drivers/usb/dwc2/hw.h +++ b/drivers/usb/dwc2/hw.h @@ -333,6 +333,8 @@ #define GLPMCFG_SNDLPM BIT(24) #define GLPMCFG_RETRY_CNT_MASK (0x7 << 21) #define GLPMCFG_RETRY_CNT_SHIFT 21 +#define GLPMCFG_LPM_ACCEPT_CTRL_CONTROL BIT(21) +#define GLPMCFG_LPM_ACCEPT_CTRL_ISOC BIT(22) #define GLPMCFG_LPM_CHNL_INDX_MASK (0xf << 17) #define GLPMCFG_LPM_CHNL_INDX_SHIFT 17 #define GLPMCFG_L1RESUMEOK BIT(16) diff --git a/drivers/usb/dwc2/params.c b/drivers/usb/dwc2/params.c index 7c1b6938f212..24ff5f21cb25 100644 --- a/drivers/usb/dwc2/params.c +++ b/drivers/usb/dwc2/params.c @@ -71,6 +71,13 @@ static void dwc2_set_his_params(struct dwc2_hsotg *hsotg) p->power_down = false; } +static void dwc2_set_s3c6400_params(struct dwc2_hsotg *hsotg) +{ + struct dwc2_core_params *p = &hsotg->params; + + p->power_down = 0; +} + static void dwc2_set_rk_params(struct dwc2_hsotg *hsotg) { struct dwc2_core_params *p = &hsotg->params; @@ -111,6 +118,7 @@ static void dwc2_set_amlogic_params(struct dwc2_hsotg *hsotg) p->phy_type = DWC2_PHY_TYPE_PARAM_UTMI; p->ahbcfg = GAHBCFG_HBSTLEN_INCR8 << GAHBCFG_HBSTLEN_SHIFT; + p->power_down = DWC2_POWER_DOWN_PARAM_NONE; } static void dwc2_set_amcc_params(struct dwc2_hsotg *hsotg) @@ -151,7 +159,8 @@ const struct of_device_id dwc2_of_match_table[] = { { .compatible = "lantiq,arx100-usb", .data = dwc2_set_ltq_params }, { .compatible = "lantiq,xrx200-usb", .data = dwc2_set_ltq_params }, { .compatible = "snps,dwc2" }, - { .compatible = "samsung,s3c6400-hsotg" }, + { .compatible = "samsung,s3c6400-hsotg", + .data = dwc2_set_s3c6400_params }, { .compatible = "amlogic,meson8-usb", .data = dwc2_set_amlogic_params }, { .compatible = "amlogic,meson8b-usb", diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 2f2048aa5fde..a1b126f90261 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -80,11 +80,12 @@ static int dwc3_get_dr_mode(struct dwc3 *dwc) mode = USB_DR_MODE_PERIPHERAL; /* - * dwc_usb31 does not support OTG mode. If the controller - * supports DRD but the dr_mode is not specified or set to OTG, - * then set the mode to peripheral. + * DWC_usb31 and DWC_usb3 v3.30a and higher do not support OTG + * mode. If the controller supports DRD but the dr_mode is not + * specified or set to OTG, then set the mode to peripheral. */ - if (mode == USB_DR_MODE_OTG && dwc3_is_usb31(dwc)) + if (mode == USB_DR_MODE_OTG && + dwc->revision >= DWC3_REVISION_330A) mode = USB_DR_MODE_PERIPHERAL; } @@ -661,6 +662,8 @@ static int dwc3_phy_setup(struct dwc3 *dwc) if (dwc->dis_enblslpm_quirk) reg &= ~DWC3_GUSB2PHYCFG_ENBLSLPM; + else + reg |= DWC3_GUSB2PHYCFG_ENBLSLPM; if (dwc->dis_u2_freeclk_exists_quirk) reg &= ~DWC3_GUSB2PHYCFG_U2_FREECLK_EXISTS; @@ -702,6 +705,7 @@ static bool dwc3_core_is_valid(struct dwc3 *dwc) /* Detected DWC_usb31 IP */ dwc->revision = dwc3_readl(dwc->regs, DWC3_VER_NUMBER); dwc->revision |= DWC3_REVISION_IS_DWC31; + dwc->version_type = dwc3_readl(dwc->regs, DWC3_VER_TYPE); } else { return false; } @@ -1244,8 +1248,12 @@ static void dwc3_get_properties(struct dwc3 *dwc) "snps,is-utmi-l1-suspend"); device_property_read_u8(dev, "snps,hird-threshold", &hird_threshold); + dwc->dis_start_transfer_quirk = device_property_read_bool(dev, + "snps,dis-start-transfer-quirk"); dwc->usb3_lpm_capable = device_property_read_bool(dev, "snps,usb3_lpm_capable"); + dwc->usb2_lpm_disable = device_property_read_bool(dev, + "snps,usb2-lpm-disable"); device_property_read_u8(dev, "snps,rx-thr-num-pkt-prd", &rx_thr_num_pkt_prd); device_property_read_u8(dev, "snps,rx-max-burst-prd", @@ -1482,7 +1490,8 @@ static int dwc3_probe(struct platform_device *pdev) ret = dwc3_core_init(dwc); if (ret) { - dev_err(dev, "failed to initialize core\n"); + if (ret != -EPROBE_DEFER) + dev_err(dev, "failed to initialize core: %d\n", ret); goto err4; } diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index 5bfb62533e0f..df876418cb78 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -37,6 +37,7 @@ #define DWC3_EP0_SETUP_SIZE 512 #define DWC3_ENDPOINTS_NUM 32 #define DWC3_XHCI_RESOURCES_NUM 2 +#define DWC3_ISOC_MAX_RETRIES 5 #define DWC3_SCRATCHBUF_SIZE 4096 /* each buffer is assumed to be 4KiB */ #define DWC3_EVENT_BUFFERS_SIZE 4096 @@ -174,13 +175,19 @@ #define DWC3_GSBUSCFG0_INCRBRSTENA (1 << 0) /* undefined length enable */ #define DWC3_GSBUSCFG0_INCRBRST_MASK 0xff +/* Global Debug LSP MUX Select */ +#define DWC3_GDBGLSPMUX_ENDBC BIT(15) /* Host only */ +#define DWC3_GDBGLSPMUX_HOSTSELECT(n) ((n) & 0x3fff) +#define DWC3_GDBGLSPMUX_DEVSELECT(n) (((n) & 0xf) << 4) +#define DWC3_GDBGLSPMUX_EPSELECT(n) ((n) & 0xf) + /* Global Debug Queue/FIFO Space Available Register */ #define DWC3_GDBGFIFOSPACE_NUM(n) ((n) & 0x1f) #define DWC3_GDBGFIFOSPACE_TYPE(n) (((n) << 5) & 0x1e0) #define DWC3_GDBGFIFOSPACE_SPACE_AVAILABLE(n) (((n) >> 16) & 0xffff) -#define DWC3_TXFIFOQ 0 -#define DWC3_RXFIFOQ 1 +#define DWC3_TXFIFO 0 +#define DWC3_RXFIFO 1 #define DWC3_TXREQQ 2 #define DWC3_RXREQQ 3 #define DWC3_RXINFOQ 4 @@ -253,6 +260,9 @@ #define DWC3_GSTS_DEVICE_IP BIT(6) #define DWC3_GSTS_CSR_TIMEOUT BIT(5) #define DWC3_GSTS_BUS_ERR_ADDR_VLD BIT(4) +#define DWC3_GSTS_CURMOD(n) ((n) & 0x3) +#define DWC3_GSTS_CURMOD_DEVICE 0 +#define DWC3_GSTS_CURMOD_HOST 1 /* Global USB2 PHY Configuration Register */ #define DWC3_GUSB2PHYCFG_PHYSOFTRST BIT(31) @@ -321,6 +331,7 @@ #define DWC3_GHWPARAMS1_EN_PWROPT_HIB 2 #define DWC3_GHWPARAMS1_PWROPT(n) ((n) << 24) #define DWC3_GHWPARAMS1_PWROPT_MASK DWC3_GHWPARAMS1_PWROPT(3) +#define DWC3_GHWPARAMS1_ENDBC BIT(31) /* Global HWPARAMS3 Register */ #define DWC3_GHWPARAMS3_SSPHY_IFC(n) ((n) & 3) @@ -636,9 +647,9 @@ struct dwc3_event_buffer { /** * struct dwc3_ep - device side endpoint representation * @endpoint: usb endpoint + * @cancelled_list: list of cancelled requests for this endpoint * @pending_list: list of pending requests for this endpoint * @started_list: list of started requests on this endpoint - * @wait_end_transfer: wait_queue_head_t for waiting on End Transfer complete * @lock: spinlock for endpoint request queue traversal * @regs: pointer to first endpoint register * @trb_pool: array of transaction buffers @@ -656,14 +667,17 @@ struct dwc3_event_buffer { * @name: a human readable name e.g. ep1out-bulk * @direction: true for TX, false for RX * @stream_capable: true when streams are enabled + * @combo_num: the test combination BIT[15:14] of the frame number to test + * isochronous START TRANSFER command failure workaround + * @start_cmd_status: the status of testing START TRANSFER command with + * combo_num = 'b00 */ struct dwc3_ep { struct usb_ep endpoint; + struct list_head cancelled_list; struct list_head pending_list; struct list_head started_list; - wait_queue_head_t wait_end_transfer; - spinlock_t lock; void __iomem *regs; @@ -705,6 +719,10 @@ struct dwc3_ep { unsigned direction:1; unsigned stream_capable:1; + + /* For isochronous START TRANSFER workaround only */ + u8 combo_num; + int start_cmd_status; }; enum dwc3_phy { @@ -766,6 +784,7 @@ enum dwc3_link_state { #define DWC3_TRB_CTRL_ISP_IMI BIT(10) #define DWC3_TRB_CTRL_IOC BIT(11) #define DWC3_TRB_CTRL_SID_SOFN(n) (((n) & 0xffff) << 14) +#define DWC3_TRB_CTRL_GET_SID_SOFN(n) (((n) & (0xffff << 14)) >> 14) #define DWC3_TRBCTL_TYPE(n) ((n) & (0x3f << 4)) #define DWC3_TRBCTL_NORMAL DWC3_TRB_CTRL_TRBCTL(1) @@ -847,11 +866,12 @@ struct dwc3_hwparams { * @epnum: endpoint number to which this request refers * @trb: pointer to struct dwc3_trb * @trb_dma: DMA address of @trb - * @unaligned: true for OUT endpoints with length not divisible by maxp + * @num_trbs: number of TRBs used by this request + * @needs_extra_trb: true when request needs one extra TRB (either due to ZLP + * or unaligned OUT) * @direction: IN or OUT direction flag * @mapped: true when request has been dma-mapped * @started: request is started - * @zero: wants a ZLP */ struct dwc3_request { struct usb_request request; @@ -867,11 +887,12 @@ struct dwc3_request { struct dwc3_trb *trb; dma_addr_t trb_dma; - unsigned unaligned:1; + unsigned num_trbs; + + unsigned needs_extra_trb:1; unsigned direction:1; unsigned mapped:1; unsigned started:1; - unsigned zero:1; }; /* @@ -918,6 +939,7 @@ struct dwc3_scratchpad_array { * @u1u2: only used on revisions <1.83a for workaround * @maximum_speed: maximum speed requested (mainly for testing purposes) * @revision: revision register contents + * @version_type: VERSIONTYPE register contents, a sub release of a revision * @dr_mode: requested mode of operation * @current_dr_role: current role of operation when in dual-role mode * @desired_dr_role: desired role of operation when in dual-role mode @@ -945,6 +967,7 @@ struct dwc3_scratchpad_array { * @hwparams: copy of hwparams registers * @root: debugfs root folder pointer * @regset: debugfs pointer to regdump file + * @dbg_lsp_select: current debug lsp mux register selection * @test_mode: true when we're entering a USB test mode * @test_mode_nr: test feature selector * @lpm_nyet_threshold: LPM NYET response threshold @@ -970,7 +993,10 @@ struct dwc3_scratchpad_array { * @pullups_connected: true when Run/Stop bit is set * @setup_packet_pending: true when there's a Setup Packet in FIFO. Workaround * @three_stage_setup: set if we perform a three phase setup + * @dis_start_transfer_quirk: set if start_transfer failure SW workaround is + * not needed for DWC_usb31 version 1.70a-ea06 and below * @usb3_lpm_capable: set if hadrware supports Link Power Management + * @usb2_lpm_disable: set to disable usb2 lpm * @disable_scramble_quirk: set if we enable the disable scramble quirk * @u2exit_lfps_quirk: set if we enable u2exit lfps quirk * @u2ss_inp3_quirk: set if we enable P3 OK for U2/SS Inactive quirk @@ -1095,6 +1121,7 @@ struct dwc3 { #define DWC3_REVISION_290A 0x5533290a #define DWC3_REVISION_300A 0x5533300a #define DWC3_REVISION_310A 0x5533310a +#define DWC3_REVISION_330A 0x5533330a /* * NOTICE: we're using bit 31 as a "is usb 3.1" flag. This is really @@ -1103,6 +1130,17 @@ struct dwc3 { #define DWC3_REVISION_IS_DWC31 0x80000000 #define DWC3_USB31_REVISION_110A (0x3131302a | DWC3_REVISION_IS_DWC31) #define DWC3_USB31_REVISION_120A (0x3132302a | DWC3_REVISION_IS_DWC31) +#define DWC3_USB31_REVISION_160A (0x3136302a | DWC3_REVISION_IS_DWC31) +#define DWC3_USB31_REVISION_170A (0x3137302a | DWC3_REVISION_IS_DWC31) + + u32 version_type; + +#define DWC31_VERSIONTYPE_EA01 0x65613031 +#define DWC31_VERSIONTYPE_EA02 0x65613032 +#define DWC31_VERSIONTYPE_EA03 0x65613033 +#define DWC31_VERSIONTYPE_EA04 0x65613034 +#define DWC31_VERSIONTYPE_EA05 0x65613035 +#define DWC31_VERSIONTYPE_EA06 0x65613036 enum dwc3_ep0_next ep0_next_event; enum dwc3_ep0_state ep0state; @@ -1121,6 +1159,8 @@ struct dwc3 { struct dentry *root; struct debugfs_regset32 *regset; + u32 dbg_lsp_select; + u8 test_mode; u8 test_mode_nr; u8 lpm_nyet_threshold; @@ -1145,7 +1185,9 @@ struct dwc3 { unsigned pullups_connected:1; unsigned setup_packet_pending:1; unsigned three_stage_setup:1; + unsigned dis_start_transfer_quirk:1; unsigned usb3_lpm_capable:1; + unsigned usb2_lpm_disable:1; unsigned disable_scramble_quirk:1; unsigned u2exit_lfps_quirk:1; diff --git a/drivers/usb/dwc3/debug.h b/drivers/usb/dwc3/debug.h index c66d216dcc30..4f75ab3505b7 100644 --- a/drivers/usb/dwc3/debug.h +++ b/drivers/usb/dwc3/debug.h @@ -117,6 +117,35 @@ dwc3_gadget_link_string(enum dwc3_link_state link_state) } /** + * dwc3_gadget_hs_link_string - returns highspeed and below link name + * @link_state: link state code + */ +static inline const char * +dwc3_gadget_hs_link_string(enum dwc3_link_state link_state) +{ + switch (link_state) { + case DWC3_LINK_STATE_U0: + return "On"; + case DWC3_LINK_STATE_U2: + return "Sleep"; + case DWC3_LINK_STATE_U3: + return "Suspend"; + case DWC3_LINK_STATE_SS_DIS: + return "Disconnected"; + case DWC3_LINK_STATE_RX_DET: + return "Early Suspend"; + case DWC3_LINK_STATE_RECOV: + return "Recovery"; + case DWC3_LINK_STATE_RESET: + return "Reset"; + case DWC3_LINK_STATE_RESUME: + return "Resume"; + default: + return "UNKNOWN link state\n"; + } +} + +/** * dwc3_trb_type_string - returns TRB type as a string * @type: the type of the TRB */ diff --git a/drivers/usb/dwc3/debugfs.c b/drivers/usb/dwc3/debugfs.c index df8e73ec3342..1c792710348f 100644 --- a/drivers/usb/dwc3/debugfs.c +++ b/drivers/usb/dwc3/debugfs.c @@ -25,6 +25,8 @@ #include "io.h" #include "debug.h" +#define DWC3_LSP_MUX_UNSELECTED 0xfffff + #define dump_register(nm) \ { \ .name = __stringify(nm), \ @@ -82,10 +84,6 @@ static const struct debugfs_reg32 dwc3_regs[] = { dump_register(GDBGFIFOSPACE), dump_register(GDBGLTSSM), dump_register(GDBGBMU), - dump_register(GDBGLSPMUX), - dump_register(GDBGLSP), - dump_register(GDBGEPINFO0), - dump_register(GDBGEPINFO1), dump_register(GPRTBIMAP_HS0), dump_register(GPRTBIMAP_HS1), dump_register(GPRTBIMAP_FS0), @@ -279,6 +277,114 @@ static const struct debugfs_reg32 dwc3_regs[] = { dump_register(OSTS), }; +static void dwc3_host_lsp(struct seq_file *s) +{ + struct dwc3 *dwc = s->private; + bool dbc_enabled; + u32 sel; + u32 reg; + u32 val; + + dbc_enabled = !!(dwc->hwparams.hwparams1 & DWC3_GHWPARAMS1_ENDBC); + + sel = dwc->dbg_lsp_select; + if (sel == DWC3_LSP_MUX_UNSELECTED) { + seq_puts(s, "Write LSP selection to print for host\n"); + return; + } + + reg = DWC3_GDBGLSPMUX_HOSTSELECT(sel); + + dwc3_writel(dwc->regs, DWC3_GDBGLSPMUX, reg); + val = dwc3_readl(dwc->regs, DWC3_GDBGLSP); + seq_printf(s, "GDBGLSP[%d] = 0x%08x\n", sel, val); + + if (dbc_enabled && sel < 256) { + reg |= DWC3_GDBGLSPMUX_ENDBC; + dwc3_writel(dwc->regs, DWC3_GDBGLSPMUX, reg); + val = dwc3_readl(dwc->regs, DWC3_GDBGLSP); + seq_printf(s, "GDBGLSP_DBC[%d] = 0x%08x\n", sel, val); + } +} + +static void dwc3_gadget_lsp(struct seq_file *s) +{ + struct dwc3 *dwc = s->private; + int i; + u32 reg; + + for (i = 0; i < 16; i++) { + reg = DWC3_GDBGLSPMUX_DEVSELECT(i); + dwc3_writel(dwc->regs, DWC3_GDBGLSPMUX, reg); + reg = dwc3_readl(dwc->regs, DWC3_GDBGLSP); + seq_printf(s, "GDBGLSP[%d] = 0x%08x\n", i, reg); + } +} + +static int dwc3_lsp_show(struct seq_file *s, void *unused) +{ + struct dwc3 *dwc = s->private; + unsigned int current_mode; + unsigned long flags; + u32 reg; + + spin_lock_irqsave(&dwc->lock, flags); + reg = dwc3_readl(dwc->regs, DWC3_GSTS); + current_mode = DWC3_GSTS_CURMOD(reg); + + switch (current_mode) { + case DWC3_GSTS_CURMOD_HOST: + dwc3_host_lsp(s); + break; + case DWC3_GSTS_CURMOD_DEVICE: + dwc3_gadget_lsp(s); + break; + default: + seq_puts(s, "Mode is unknown, no LSP register printed\n"); + break; + } + spin_unlock_irqrestore(&dwc->lock, flags); + + return 0; +} + +static int dwc3_lsp_open(struct inode *inode, struct file *file) +{ + return single_open(file, dwc3_lsp_show, inode->i_private); +} + +static ssize_t dwc3_lsp_write(struct file *file, const char __user *ubuf, + size_t count, loff_t *ppos) +{ + struct seq_file *s = file->private_data; + struct dwc3 *dwc = s->private; + unsigned long flags; + char buf[32] = { 0 }; + u32 sel; + int ret; + + if (copy_from_user(&buf, ubuf, min_t(size_t, sizeof(buf) - 1, count))) + return -EFAULT; + + ret = kstrtouint(buf, 0, &sel); + if (ret) + return ret; + + spin_lock_irqsave(&dwc->lock, flags); + dwc->dbg_lsp_select = sel; + spin_unlock_irqrestore(&dwc->lock, flags); + + return count; +} + +static const struct file_operations dwc3_lsp_fops = { + .open = dwc3_lsp_open, + .write = dwc3_lsp_write, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + static int dwc3_mode_show(struct seq_file *s, void *unused) { struct dwc3 *dwc = s->private; @@ -433,13 +539,24 @@ static int dwc3_link_state_show(struct seq_file *s, void *unused) unsigned long flags; enum dwc3_link_state state; u32 reg; + u8 speed; spin_lock_irqsave(&dwc->lock, flags); + reg = dwc3_readl(dwc->regs, DWC3_GSTS); + if (DWC3_GSTS_CURMOD(reg) != DWC3_GSTS_CURMOD_DEVICE) { + seq_puts(s, "Not available\n"); + spin_unlock_irqrestore(&dwc->lock, flags); + return 0; + } + reg = dwc3_readl(dwc->regs, DWC3_DSTS); state = DWC3_DSTS_USBLNKST(reg); - spin_unlock_irqrestore(&dwc->lock, flags); + speed = reg & DWC3_DSTS_CONNECTSPD; - seq_printf(s, "%s\n", dwc3_gadget_link_string(state)); + seq_printf(s, "%s\n", (speed >= DWC3_DSTS_SUPERSPEED) ? + dwc3_gadget_link_string(state) : + dwc3_gadget_hs_link_string(state)); + spin_unlock_irqrestore(&dwc->lock, flags); return 0; } @@ -457,6 +574,8 @@ static ssize_t dwc3_link_state_write(struct file *file, unsigned long flags; enum dwc3_link_state state = 0; char buf[32]; + u32 reg; + u8 speed; if (copy_from_user(&buf, ubuf, min_t(size_t, sizeof(buf) - 1, count))) return -EFAULT; @@ -477,6 +596,21 @@ static ssize_t dwc3_link_state_write(struct file *file, return -EINVAL; spin_lock_irqsave(&dwc->lock, flags); + reg = dwc3_readl(dwc->regs, DWC3_GSTS); + if (DWC3_GSTS_CURMOD(reg) != DWC3_GSTS_CURMOD_DEVICE) { + spin_unlock_irqrestore(&dwc->lock, flags); + return -EINVAL; + } + + reg = dwc3_readl(dwc->regs, DWC3_DSTS); + speed = reg & DWC3_DSTS_CONNECTSPD; + + if (speed < DWC3_DSTS_SUPERSPEED && + state != DWC3_LINK_STATE_RECOV) { + spin_unlock_irqrestore(&dwc->lock, flags); + return -EINVAL; + } + dwc3_gadget_set_link_state(dwc, state); spin_unlock_irqrestore(&dwc->lock, flags); @@ -496,7 +630,7 @@ struct dwc3_ep_file_map { const struct file_operations *const fops; }; -static int dwc3_tx_fifo_queue_show(struct seq_file *s, void *unused) +static int dwc3_tx_fifo_size_show(struct seq_file *s, void *unused) { struct dwc3_ep *dep = s->private; struct dwc3 *dwc = dep->dwc; @@ -504,14 +638,18 @@ static int dwc3_tx_fifo_queue_show(struct seq_file *s, void *unused) u32 val; spin_lock_irqsave(&dwc->lock, flags); - val = dwc3_core_fifo_space(dep, DWC3_TXFIFOQ); + val = dwc3_core_fifo_space(dep, DWC3_TXFIFO); + + /* Convert to bytes */ + val *= DWC3_MDWIDTH(dwc->hwparams.hwparams0); + val >>= 3; seq_printf(s, "%u\n", val); spin_unlock_irqrestore(&dwc->lock, flags); return 0; } -static int dwc3_rx_fifo_queue_show(struct seq_file *s, void *unused) +static int dwc3_rx_fifo_size_show(struct seq_file *s, void *unused) { struct dwc3_ep *dep = s->private; struct dwc3 *dwc = dep->dwc; @@ -519,7 +657,11 @@ static int dwc3_rx_fifo_queue_show(struct seq_file *s, void *unused) u32 val; spin_lock_irqsave(&dwc->lock, flags); - val = dwc3_core_fifo_space(dep, DWC3_RXFIFOQ); + val = dwc3_core_fifo_space(dep, DWC3_RXFIFO); + + /* Convert to bytes */ + val *= DWC3_MDWIDTH(dwc->hwparams.hwparams0); + val >>= 3; seq_printf(s, "%u\n", val); spin_unlock_irqrestore(&dwc->lock, flags); @@ -675,8 +817,32 @@ out: return 0; } -DEFINE_SHOW_ATTRIBUTE(dwc3_tx_fifo_queue); -DEFINE_SHOW_ATTRIBUTE(dwc3_rx_fifo_queue); +static int dwc3_ep_info_register_show(struct seq_file *s, void *unused) +{ + struct dwc3_ep *dep = s->private; + struct dwc3 *dwc = dep->dwc; + unsigned long flags; + u64 ep_info; + u32 lower_32_bits; + u32 upper_32_bits; + u32 reg; + + spin_lock_irqsave(&dwc->lock, flags); + reg = DWC3_GDBGLSPMUX_EPSELECT(dep->number); + dwc3_writel(dwc->regs, DWC3_GDBGLSPMUX, reg); + + lower_32_bits = dwc3_readl(dwc->regs, DWC3_GDBGEPINFO0); + upper_32_bits = dwc3_readl(dwc->regs, DWC3_GDBGEPINFO1); + + ep_info = ((u64)upper_32_bits << 32) | lower_32_bits; + seq_printf(s, "0x%016llx\n", ep_info); + spin_unlock_irqrestore(&dwc->lock, flags); + + return 0; +} + +DEFINE_SHOW_ATTRIBUTE(dwc3_tx_fifo_size); +DEFINE_SHOW_ATTRIBUTE(dwc3_rx_fifo_size); DEFINE_SHOW_ATTRIBUTE(dwc3_tx_request_queue); DEFINE_SHOW_ATTRIBUTE(dwc3_rx_request_queue); DEFINE_SHOW_ATTRIBUTE(dwc3_rx_info_queue); @@ -684,10 +850,11 @@ DEFINE_SHOW_ATTRIBUTE(dwc3_descriptor_fetch_queue); DEFINE_SHOW_ATTRIBUTE(dwc3_event_queue); DEFINE_SHOW_ATTRIBUTE(dwc3_transfer_type); DEFINE_SHOW_ATTRIBUTE(dwc3_trb_ring); +DEFINE_SHOW_ATTRIBUTE(dwc3_ep_info_register); static const struct dwc3_ep_file_map dwc3_ep_file_map[] = { - { "tx_fifo_queue", &dwc3_tx_fifo_queue_fops, }, - { "rx_fifo_queue", &dwc3_rx_fifo_queue_fops, }, + { "tx_fifo_size", &dwc3_tx_fifo_size_fops, }, + { "rx_fifo_size", &dwc3_rx_fifo_size_fops, }, { "tx_request_queue", &dwc3_tx_request_queue_fops, }, { "rx_request_queue", &dwc3_rx_request_queue_fops, }, { "rx_info_queue", &dwc3_rx_info_queue_fops, }, @@ -695,6 +862,7 @@ static const struct dwc3_ep_file_map dwc3_ep_file_map[] = { { "event_queue", &dwc3_event_queue_fops, }, { "transfer_type", &dwc3_transfer_type_fops, }, { "trb_ring", &dwc3_trb_ring_fops, }, + { "GDBGEPINFO", &dwc3_ep_info_register_fops, }, }; static void dwc3_debugfs_create_endpoint_files(struct dwc3_ep *dep, @@ -742,6 +910,8 @@ void dwc3_debugfs_init(struct dwc3 *dwc) if (!dwc->regset) return; + dwc->dbg_lsp_select = DWC3_LSP_MUX_UNSELECTED; + dwc->regset->regs = dwc3_regs; dwc->regset->nregs = ARRAY_SIZE(dwc3_regs); dwc->regset->base = dwc->regs - DWC3_GLOBALS_REGS_START; @@ -751,6 +921,9 @@ void dwc3_debugfs_init(struct dwc3 *dwc) debugfs_create_regset32("regdump", S_IRUGO, root, dwc->regset); + debugfs_create_file("lsp_dump", S_IRUGO | S_IWUSR, root, dwc, + &dwc3_lsp_fops); + if (IS_ENABLED(CONFIG_USB_DWC3_DUAL_ROLE)) { debugfs_create_file("mode", S_IRUGO | S_IWUSR, root, dwc, &dwc3_mode_fops); diff --git a/drivers/usb/dwc3/drd.c b/drivers/usb/dwc3/drd.c index 218371f985ca..869725d15c74 100644 --- a/drivers/usb/dwc3/drd.c +++ b/drivers/usb/dwc3/drd.c @@ -10,6 +10,7 @@ #include <linux/extcon.h> #include <linux/of_graph.h> #include <linux/platform_device.h> +#include <linux/property.h> #include "debug.h" #include "core.h" @@ -445,9 +446,19 @@ static struct extcon_dev *dwc3_get_extcon(struct dwc3 *dwc) struct device *dev = dwc->dev; struct device_node *np_phy, *np_conn; struct extcon_dev *edev; + const char *name; - if (of_property_read_bool(dev->of_node, "extcon")) - return extcon_get_edev_by_phandle(dwc->dev, 0); + if (device_property_read_bool(dev, "extcon")) + return extcon_get_edev_by_phandle(dev, 0); + + /* + * Device tree platforms should get extcon via phandle. + * On ACPI platforms, we get the name from a device property. + * This device property is for kernel internal use only and + * is expected to be set by the glue code. + */ + if (device_property_read_string(dev, "linux,extcon-name", &name) == 0) + return extcon_get_extcon_dev(name); np_phy = of_parse_phandle(dev->of_node, "phys", 0); np_conn = of_graph_get_remote_node(np_phy, -1, -1); diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c index 842795856bf4..fdc6e4e403e8 100644 --- a/drivers/usb/dwc3/dwc3-pci.c +++ b/drivers/usb/dwc3/dwc3-pci.c @@ -170,20 +170,20 @@ static int dwc3_pci_quirks(struct dwc3_pci *dwc) * put the gpio descriptors again here because the phy driver * might want to grab them, too. */ - gpio = devm_gpiod_get_optional(&pdev->dev, "cs", - GPIOD_OUT_LOW); + gpio = gpiod_get_optional(&pdev->dev, "cs", GPIOD_OUT_LOW); if (IS_ERR(gpio)) return PTR_ERR(gpio); gpiod_set_value_cansleep(gpio, 1); + gpiod_put(gpio); - gpio = devm_gpiod_get_optional(&pdev->dev, "reset", - GPIOD_OUT_LOW); + gpio = gpiod_get_optional(&pdev->dev, "reset", GPIOD_OUT_LOW); if (IS_ERR(gpio)) return PTR_ERR(gpio); if (gpio) { gpiod_set_value_cansleep(gpio, 1); + gpiod_put(gpio); usleep_range(10000, 11000); } } diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 9f92ee03dde7..07bd31bb2f8a 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -27,7 +27,7 @@ #include "gadget.h" #include "io.h" -#define DWC3_ALIGN_FRAME(d) (((d)->frame_number + (d)->interval) \ +#define DWC3_ALIGN_FRAME(d, n) (((d)->frame_number + ((d)->interval * (n))) \ & ~((d)->interval - 1)) /** @@ -647,8 +647,6 @@ static int __dwc3_gadget_ep_enable(struct dwc3_ep *dep, unsigned int action) reg |= DWC3_DALEPENA_EP(dep->number); dwc3_writel(dwc->regs, DWC3_DALEPENA, reg); - init_waitqueue_head(&dep->wait_end_transfer); - if (usb_endpoint_xfer_control(desc)) goto out; @@ -672,7 +670,7 @@ static int __dwc3_gadget_ep_enable(struct dwc3_ep *dep, unsigned int action) * Issue StartTransfer here with no-op TRB so we can always rely on No * Response Update Transfer command. */ - if (usb_endpoint_xfer_bulk(desc) || + if ((usb_endpoint_xfer_bulk(desc) && !dep->stream_capable) || usb_endpoint_xfer_int(desc)) { struct dwc3_gadget_ep_cmd_params params; struct dwc3_trb *trb; @@ -919,8 +917,6 @@ static void __dwc3_prepare_one_trb(struct dwc3_ep *dep, struct dwc3_trb *trb, struct usb_gadget *gadget = &dwc->gadget; enum usb_device_speed speed = gadget->speed; - dwc3_ep_inc_enq(dep); - trb->size = DWC3_TRB_SIZE_LENGTH(length); trb->bpl = lower_32_bits(dma); trb->bph = upper_32_bits(dma); @@ -990,16 +986,20 @@ static void __dwc3_prepare_one_trb(struct dwc3_ep *dep, struct dwc3_trb *trb, usb_endpoint_type(dep->endpoint.desc)); } - /* always enable Continue on Short Packet */ + /* + * Enable Continue on Short Packet + * when endpoint is not a stream capable + */ if (usb_endpoint_dir_out(dep->endpoint.desc)) { - trb->ctrl |= DWC3_TRB_CTRL_CSP; + if (!dep->stream_capable) + trb->ctrl |= DWC3_TRB_CTRL_CSP; if (short_not_ok) trb->ctrl |= DWC3_TRB_CTRL_ISP_IMI; } if ((!no_interrupt && !chain) || - (dwc3_calc_trbs_left(dep) == 0)) + (dwc3_calc_trbs_left(dep) == 1)) trb->ctrl |= DWC3_TRB_CTRL_IOC; if (chain) @@ -1010,6 +1010,8 @@ static void __dwc3_prepare_one_trb(struct dwc3_ep *dep, struct dwc3_trb *trb, trb->ctrl |= DWC3_TRB_CTRL_HWO; + dwc3_ep_inc_enq(dep); + trace_dwc3_prepare_trb(dep, trb); } @@ -1046,6 +1048,8 @@ static void dwc3_prepare_one_trb(struct dwc3_ep *dep, req->trb_dma = dwc3_trb_dma_offset(dep, trb); } + req->num_trbs++; + __dwc3_prepare_one_trb(dep, trb, dma, length, chain, node, stream_id, short_not_ok, no_interrupt); } @@ -1073,13 +1077,14 @@ static void dwc3_prepare_one_trb_sg(struct dwc3_ep *dep, struct dwc3 *dwc = dep->dwc; struct dwc3_trb *trb; - req->unaligned = true; + req->needs_extra_trb = true; /* prepare normal TRB */ dwc3_prepare_one_trb(dep, req, true, i); /* Now prepare one extra TRB to align transfer size */ trb = &dep->trb_pool[dep->trb_enqueue]; + req->num_trbs++; __dwc3_prepare_one_trb(dep, trb, dwc->bounce_addr, maxp - rem, false, 1, req->request.stream_id, @@ -1117,13 +1122,14 @@ static void dwc3_prepare_one_trb_linear(struct dwc3_ep *dep, struct dwc3 *dwc = dep->dwc; struct dwc3_trb *trb; - req->unaligned = true; + req->needs_extra_trb = true; /* prepare normal TRB */ dwc3_prepare_one_trb(dep, req, true, 0); /* Now prepare one extra TRB to align transfer size */ trb = &dep->trb_pool[dep->trb_enqueue]; + req->num_trbs++; __dwc3_prepare_one_trb(dep, trb, dwc->bounce_addr, maxp - rem, false, 1, req->request.stream_id, req->request.short_not_ok, @@ -1133,13 +1139,14 @@ static void dwc3_prepare_one_trb_linear(struct dwc3_ep *dep, struct dwc3 *dwc = dep->dwc; struct dwc3_trb *trb; - req->zero = true; + req->needs_extra_trb = true; /* prepare normal TRB */ dwc3_prepare_one_trb(dep, req, true, 0); /* Now prepare one extra TRB to handle ZLP */ trb = &dep->trb_pool[dep->trb_enqueue]; + req->num_trbs++; __dwc3_prepare_one_trb(dep, trb, dwc->bounce_addr, 0, false, 1, req->request.stream_id, req->request.short_not_ok, @@ -1232,6 +1239,9 @@ static int __dwc3_gadget_kick_transfer(struct dwc3_ep *dep) params.param1 = lower_32_bits(req->trb_dma); cmd = DWC3_DEPCMD_STARTTRANSFER; + if (dep->stream_capable) + cmd |= DWC3_DEPCMD_PARAM(req->request.stream_id); + if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) cmd |= DWC3_DEPCMD_PARAM(dep->frame_number); } else { @@ -1263,17 +1273,151 @@ static int __dwc3_gadget_get_frame(struct dwc3 *dwc) return DWC3_DSTS_SOFFN(reg); } -static void __dwc3_gadget_start_isoc(struct dwc3_ep *dep) +/** + * dwc3_gadget_start_isoc_quirk - workaround invalid frame number + * @dep: isoc endpoint + * + * This function tests for the correct combination of BIT[15:14] from the 16-bit + * microframe number reported by the XferNotReady event for the future frame + * number to start the isoc transfer. + * + * In DWC_usb31 version 1.70a-ea06 and prior, for highspeed and fullspeed + * isochronous IN, BIT[15:14] of the 16-bit microframe number reported by the + * XferNotReady event are invalid. The driver uses this number to schedule the + * isochronous transfer and passes it to the START TRANSFER command. Because + * this number is invalid, the command may fail. If BIT[15:14] matches the + * internal 16-bit microframe, the START TRANSFER command will pass and the + * transfer will start at the scheduled time, if it is off by 1, the command + * will still pass, but the transfer will start 2 seconds in the future. For all + * other conditions, the START TRANSFER command will fail with bus-expiry. + * + * In order to workaround this issue, we can test for the correct combination of + * BIT[15:14] by sending START TRANSFER commands with different values of + * BIT[15:14]: 'b00, 'b01, 'b10, and 'b11. Each combination is 2^14 uframe apart + * (or 2 seconds). 4 seconds into the future will result in a bus-expiry status. + * As the result, within the 4 possible combinations for BIT[15:14], there will + * be 2 successful and 2 failure START COMMAND status. One of the 2 successful + * command status will result in a 2-second delay start. The smaller BIT[15:14] + * value is the correct combination. + * + * Since there are only 4 outcomes and the results are ordered, we can simply + * test 2 START TRANSFER commands with BIT[15:14] combinations 'b00 and 'b01 to + * deduce the smaller successful combination. + * + * Let test0 = test status for combination 'b00 and test1 = test status for 'b01 + * of BIT[15:14]. The correct combination is as follow: + * + * if test0 fails and test1 passes, BIT[15:14] is 'b01 + * if test0 fails and test1 fails, BIT[15:14] is 'b10 + * if test0 passes and test1 fails, BIT[15:14] is 'b11 + * if test0 passes and test1 passes, BIT[15:14] is 'b00 + * + * Synopsys STAR 9001202023: Wrong microframe number for isochronous IN + * endpoints. + */ +static int dwc3_gadget_start_isoc_quirk(struct dwc3_ep *dep) +{ + int cmd_status = 0; + bool test0; + bool test1; + + while (dep->combo_num < 2) { + struct dwc3_gadget_ep_cmd_params params; + u32 test_frame_number; + u32 cmd; + + /* + * Check if we can start isoc transfer on the next interval or + * 4 uframes in the future with BIT[15:14] as dep->combo_num + */ + test_frame_number = dep->frame_number & 0x3fff; + test_frame_number |= dep->combo_num << 14; + test_frame_number += max_t(u32, 4, dep->interval); + + params.param0 = upper_32_bits(dep->dwc->bounce_addr); + params.param1 = lower_32_bits(dep->dwc->bounce_addr); + + cmd = DWC3_DEPCMD_STARTTRANSFER; + cmd |= DWC3_DEPCMD_PARAM(test_frame_number); + cmd_status = dwc3_send_gadget_ep_cmd(dep, cmd, ¶ms); + + /* Redo if some other failure beside bus-expiry is received */ + if (cmd_status && cmd_status != -EAGAIN) { + dep->start_cmd_status = 0; + dep->combo_num = 0; + return 0; + } + + /* Store the first test status */ + if (dep->combo_num == 0) + dep->start_cmd_status = cmd_status; + + dep->combo_num++; + + /* + * End the transfer if the START_TRANSFER command is successful + * to wait for the next XferNotReady to test the command again + */ + if (cmd_status == 0) { + dwc3_stop_active_transfer(dep, true); + return 0; + } + } + + /* test0 and test1 are both completed at this point */ + test0 = (dep->start_cmd_status == 0); + test1 = (cmd_status == 0); + + if (!test0 && test1) + dep->combo_num = 1; + else if (!test0 && !test1) + dep->combo_num = 2; + else if (test0 && !test1) + dep->combo_num = 3; + else if (test0 && test1) + dep->combo_num = 0; + + dep->frame_number &= 0x3fff; + dep->frame_number |= dep->combo_num << 14; + dep->frame_number += max_t(u32, 4, dep->interval); + + /* Reinitialize test variables */ + dep->start_cmd_status = 0; + dep->combo_num = 0; + + return __dwc3_gadget_kick_transfer(dep); +} + +static int __dwc3_gadget_start_isoc(struct dwc3_ep *dep) { + struct dwc3 *dwc = dep->dwc; + int ret; + int i; + if (list_empty(&dep->pending_list)) { - dev_info(dep->dwc->dev, "%s: ran out of requests\n", - dep->name); dep->flags |= DWC3_EP_PENDING_REQUEST; - return; + return -EAGAIN; + } + + if (!dwc->dis_start_transfer_quirk && dwc3_is_usb31(dwc) && + (dwc->revision <= DWC3_USB31_REVISION_160A || + (dwc->revision == DWC3_USB31_REVISION_170A && + dwc->version_type >= DWC31_VERSIONTYPE_EA01 && + dwc->version_type <= DWC31_VERSIONTYPE_EA06))) { + + if (dwc->gadget.speed <= USB_SPEED_HIGH && dep->direction) + return dwc3_gadget_start_isoc_quirk(dep); } - dep->frame_number = DWC3_ALIGN_FRAME(dep); - __dwc3_gadget_kick_transfer(dep); + for (i = 0; i < DWC3_ISOC_MAX_RETRIES; i++) { + dep->frame_number = DWC3_ALIGN_FRAME(dep, i + 1); + + ret = __dwc3_gadget_kick_transfer(dep); + if (ret != -EAGAIN) + break; + } + + return ret; } static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req) @@ -1314,8 +1458,7 @@ static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req) if ((dep->flags & DWC3_EP_PENDING_REQUEST)) { if (!(dep->flags & DWC3_EP_TRANSFER_STARTED)) { - __dwc3_gadget_start_isoc(dep); - return 0; + return __dwc3_gadget_start_isoc(dep); } } } @@ -1341,6 +1484,40 @@ static int dwc3_gadget_ep_queue(struct usb_ep *ep, struct usb_request *request, return ret; } +static void dwc3_gadget_ep_skip_trbs(struct dwc3_ep *dep, struct dwc3_request *req) +{ + int i; + + /* + * If request was already started, this means we had to + * stop the transfer. With that we also need to ignore + * all TRBs used by the request, however TRBs can only + * be modified after completion of END_TRANSFER + * command. So what we do here is that we wait for + * END_TRANSFER completion and only after that, we jump + * over TRBs by clearing HWO and incrementing dequeue + * pointer. + */ + for (i = 0; i < req->num_trbs; i++) { + struct dwc3_trb *trb; + + trb = req->trb + i; + trb->ctrl &= ~DWC3_TRB_CTRL_HWO; + dwc3_ep_inc_deq(dep); + } +} + +static void dwc3_gadget_ep_cleanup_cancelled_requests(struct dwc3_ep *dep) +{ + struct dwc3_request *req; + struct dwc3_request *tmp; + + list_for_each_entry_safe(req, tmp, &dep->cancelled_list, list) { + dwc3_gadget_ep_skip_trbs(dep, req); + dwc3_gadget_giveback(dep, req, -ECONNRESET); + } +} + static int dwc3_gadget_ep_dequeue(struct usb_ep *ep, struct usb_request *request) { @@ -1371,68 +1548,11 @@ static int dwc3_gadget_ep_dequeue(struct usb_ep *ep, /* wait until it is processed */ dwc3_stop_active_transfer(dep, true); - /* - * If request was already started, this means we had to - * stop the transfer. With that we also need to ignore - * all TRBs used by the request, however TRBs can only - * be modified after completion of END_TRANSFER - * command. So what we do here is that we wait for - * END_TRANSFER completion and only after that, we jump - * over TRBs by clearing HWO and incrementing dequeue - * pointer. - * - * Note that we have 2 possible types of transfers here: - * - * i) Linear buffer request - * ii) SG-list based request - * - * SG-list based requests will have r->num_pending_sgs - * set to a valid number (> 0). Linear requests, - * normally use a single TRB. - * - * For each of these two cases, if r->unaligned flag is - * set, one extra TRB has been used to align transfer - * size to wMaxPacketSize. - * - * All of these cases need to be taken into - * consideration so we don't mess up our TRB ring - * pointers. - */ - wait_event_lock_irq(dep->wait_end_transfer, - !(dep->flags & DWC3_EP_END_TRANSFER_PENDING), - dwc->lock); - if (!r->trb) goto out0; - if (r->num_pending_sgs) { - struct dwc3_trb *trb; - int i = 0; - - for (i = 0; i < r->num_pending_sgs; i++) { - trb = r->trb + i; - trb->ctrl &= ~DWC3_TRB_CTRL_HWO; - dwc3_ep_inc_deq(dep); - } - - if (r->unaligned || r->zero) { - trb = r->trb + r->num_pending_sgs + 1; - trb->ctrl &= ~DWC3_TRB_CTRL_HWO; - dwc3_ep_inc_deq(dep); - } - } else { - struct dwc3_trb *trb = r->trb; - - trb->ctrl &= ~DWC3_TRB_CTRL_HWO; - dwc3_ep_inc_deq(dep); - - if (r->unaligned || r->zero) { - trb = r->trb + 1; - trb->ctrl &= ~DWC3_TRB_CTRL_HWO; - dwc3_ep_inc_deq(dep); - } - } - goto out1; + dwc3_gadget_move_cancelled_request(req); + goto out0; } dev_err(dwc->dev, "request %pK was not queued to %s\n", request, ep->name); @@ -1440,9 +1560,6 @@ static int dwc3_gadget_ep_dequeue(struct usb_ep *ep, goto out0; } -out1: - /* giveback the request */ - dwc3_gadget_giveback(dep, req, -ECONNRESET); out0: @@ -1934,8 +2051,6 @@ static int dwc3_gadget_stop(struct usb_gadget *g) { struct dwc3 *dwc = gadget_to_dwc(g); unsigned long flags; - int epnum; - u32 tmo_eps = 0; spin_lock_irqsave(&dwc->lock, flags); @@ -1944,36 +2059,6 @@ static int dwc3_gadget_stop(struct usb_gadget *g) __dwc3_gadget_stop(dwc); - for (epnum = 2; epnum < DWC3_ENDPOINTS_NUM; epnum++) { - struct dwc3_ep *dep = dwc->eps[epnum]; - int ret; - - if (!dep) - continue; - - if (!(dep->flags & DWC3_EP_END_TRANSFER_PENDING)) - continue; - - ret = wait_event_interruptible_lock_irq_timeout(dep->wait_end_transfer, - !(dep->flags & DWC3_EP_END_TRANSFER_PENDING), - dwc->lock, msecs_to_jiffies(5)); - - if (ret <= 0) { - /* Timed out or interrupted! There's nothing much - * we can do so we just log here and print which - * endpoints timed out at the end. - */ - tmo_eps |= 1 << epnum; - dep->flags &= DWC3_EP_END_TRANSFER_PENDING; - } - } - - if (tmo_eps) { - dev_err(dwc->dev, - "end transfer timed out on endpoints 0x%x [bitmap]\n", - tmo_eps); - } - out: dwc->gadget_driver = NULL; spin_unlock_irqrestore(&dwc->lock, flags); @@ -2148,6 +2233,8 @@ static int dwc3_gadget_init_endpoint(struct dwc3 *dwc, u8 epnum) dep->direction = direction; dep->regs = dwc->regs + DWC3_DEP_BASE(epnum); dwc->eps[epnum] = dep; + dep->combo_num = 0; + dep->start_cmd_status = 0; snprintf(dep->name, sizeof(dep->name), "ep%u%s", num, direction ? "in" : "out"); @@ -2176,6 +2263,7 @@ static int dwc3_gadget_init_endpoint(struct dwc3 *dwc, u8 epnum) INIT_LIST_HEAD(&dep->pending_list); INIT_LIST_HEAD(&dep->started_list); + INIT_LIST_HEAD(&dep->cancelled_list); return 0; } @@ -2235,6 +2323,7 @@ static int dwc3_gadget_ep_reclaim_completed_trb(struct dwc3_ep *dep, dwc3_ep_inc_deq(dep); trace_dwc3_complete_trb(dep, trb); + req->num_trbs--; /* * If we're in the middle of series of chained TRBs and we @@ -2250,11 +2339,25 @@ static int dwc3_gadget_ep_reclaim_completed_trb(struct dwc3_ep *dep, trb->ctrl &= ~DWC3_TRB_CTRL_HWO; /* + * For isochronous transfers, the first TRB in a service interval must + * have the Isoc-First type. Track and report its interval frame number. + */ + if (usb_endpoint_xfer_isoc(dep->endpoint.desc) && + (trb->ctrl & DWC3_TRBCTL_ISOCHRONOUS_FIRST)) { + unsigned int frame_number; + + frame_number = DWC3_TRB_CTRL_GET_SID_SOFN(trb->ctrl); + frame_number &= ~(dep->interval - 1); + req->request.frame_number = frame_number; + } + + /* * If we're dealing with unaligned size OUT transfer, we will be left * with one TRB pending in the ring. We need to manually clear HWO bit * from that TRB. */ - if ((req->zero || req->unaligned) && !(trb->ctrl & DWC3_TRB_CTRL_CHN)) { + + if (req->needs_extra_trb && !(trb->ctrl & DWC3_TRB_CTRL_CHN)) { trb->ctrl &= ~DWC3_TRB_CTRL_HWO; return 1; } @@ -2331,11 +2434,10 @@ static int dwc3_gadget_ep_cleanup_completed_request(struct dwc3_ep *dep, ret = dwc3_gadget_ep_reclaim_trb_linear(dep, req, event, status); - if (req->unaligned || req->zero) { + if (req->needs_extra_trb) { ret = dwc3_gadget_ep_reclaim_trb_linear(dep, req, event, status); - req->unaligned = false; - req->zero = false; + req->needs_extra_trb = false; } req->request.actual = req->request.length - req->remaining; @@ -2430,7 +2532,7 @@ static void dwc3_gadget_endpoint_transfer_not_ready(struct dwc3_ep *dep, const struct dwc3_event_depevt *event) { dwc3_gadget_endpoint_frame_from_event(dep, event); - __dwc3_gadget_start_isoc(dep); + (void) __dwc3_gadget_start_isoc(dep); } static void dwc3_endpoint_interrupt(struct dwc3 *dwc, @@ -2468,7 +2570,7 @@ static void dwc3_endpoint_interrupt(struct dwc3 *dwc, if (cmd == DWC3_DEPCMD_ENDTRANSFER) { dep->flags &= ~DWC3_EP_END_TRANSFER_PENDING; - wake_up(&dep->wait_end_transfer); + dwc3_gadget_ep_cleanup_cancelled_requests(dep); } break; case DWC3_DEPEVT_STREAMEVT: diff --git a/drivers/usb/dwc3/gadget.h b/drivers/usb/dwc3/gadget.h index 2aacd1afd9ff..023a473648eb 100644 --- a/drivers/usb/dwc3/gadget.h +++ b/drivers/usb/dwc3/gadget.h @@ -79,6 +79,21 @@ static inline void dwc3_gadget_move_started_request(struct dwc3_request *req) list_move_tail(&req->list, &dep->started_list); } +/** + * dwc3_gadget_move_cancelled_request - move @req to the cancelled_list + * @req: the request to be moved + * + * Caller should take care of locking. This function will move @req from its + * current list to the endpoint's cancelled_list. + */ +static inline void dwc3_gadget_move_cancelled_request(struct dwc3_request *req) +{ + struct dwc3_ep *dep = req->dep; + + req->started = false; + list_move_tail(&req->list, &dep->cancelled_list); +} + void dwc3_gadget_giveback(struct dwc3_ep *dep, struct dwc3_request *req, int status); diff --git a/drivers/usb/dwc3/host.c b/drivers/usb/dwc3/host.c index 1a3878a3be78..f55947294f7c 100644 --- a/drivers/usb/dwc3/host.c +++ b/drivers/usb/dwc3/host.c @@ -46,7 +46,7 @@ out: int dwc3_host_init(struct dwc3 *dwc) { - struct property_entry props[3]; + struct property_entry props[4]; struct platform_device *xhci; int ret, irq; struct resource *res; @@ -93,6 +93,9 @@ int dwc3_host_init(struct dwc3 *dwc) if (dwc->usb3_lpm_capable) props[prop_idx++].name = "usb3-lpm-capable"; + if (dwc->usb2_lpm_disable) + props[prop_idx++].name = "usb2-lpm-disable"; + /** * WORKAROUND: dwc3 revisions <=3.00a have a limitation * where Port Disable command doesn't work. diff --git a/drivers/usb/dwc3/trace.h b/drivers/usb/dwc3/trace.h index f22714cce070..e97a00593dda 100644 --- a/drivers/usb/dwc3/trace.h +++ b/drivers/usb/dwc3/trace.h @@ -199,7 +199,7 @@ DECLARE_EVENT_CLASS(dwc3_log_gadget_ep_cmd, __entry->param2 = params->param2; __entry->cmd_status = cmd_status; ), - TP_printk("%s: cmd '%s' [%d] params %08x %08x %08x --> status: %s", + TP_printk("%s: cmd '%s' [%x] params %08x %08x %08x --> status: %s", __get_str(name), dwc3_gadget_ep_cmd_string(__entry->cmd), __entry->cmd, __entry->param0, __entry->param1, __entry->param2, @@ -251,9 +251,11 @@ DECLARE_EVENT_CLASS(dwc3_log_trb, s = "2x "; break; case 3: + default: s = "3x "; break; } + break; default: s = ""; } s; }), diff --git a/drivers/usb/gadget/function/f_fs.c b/drivers/usb/gadget/function/f_fs.c index 31e8bf3578c8..1e5430438703 100644 --- a/drivers/usb/gadget/function/f_fs.c +++ b/drivers/usb/gadget/function/f_fs.c @@ -18,11 +18,15 @@ #include <linux/pagemap.h> #include <linux/export.h> #include <linux/hid.h> +#include <linux/mm.h> #include <linux/module.h> +#include <linux/scatterlist.h> #include <linux/sched/signal.h> #include <linux/uio.h> +#include <linux/vmalloc.h> #include <asm/unaligned.h> +#include <linux/usb/ccid.h> #include <linux/usb/composite.h> #include <linux/usb/functionfs.h> @@ -218,6 +222,8 @@ struct ffs_io_data { struct usb_ep *ep; struct usb_request *req; + struct sg_table sgt; + bool use_sg; struct ffs_data *ffs; }; @@ -749,6 +755,65 @@ static ssize_t ffs_copy_to_iter(void *data, int data_len, struct iov_iter *iter) return ret; } +/* + * allocate a virtually contiguous buffer and create a scatterlist describing it + * @sg_table - pointer to a place to be filled with sg_table contents + * @size - required buffer size + */ +static void *ffs_build_sg_list(struct sg_table *sgt, size_t sz) +{ + struct page **pages; + void *vaddr, *ptr; + unsigned int n_pages; + int i; + + vaddr = vmalloc(sz); + if (!vaddr) + return NULL; + + n_pages = PAGE_ALIGN(sz) >> PAGE_SHIFT; + pages = kvmalloc_array(n_pages, sizeof(struct page *), GFP_KERNEL); + if (!pages) { + vfree(vaddr); + + return NULL; + } + for (i = 0, ptr = vaddr; i < n_pages; ++i, ptr += PAGE_SIZE) + pages[i] = vmalloc_to_page(ptr); + + if (sg_alloc_table_from_pages(sgt, pages, n_pages, 0, sz, GFP_KERNEL)) { + kvfree(pages); + vfree(vaddr); + + return NULL; + } + kvfree(pages); + + return vaddr; +} + +static inline void *ffs_alloc_buffer(struct ffs_io_data *io_data, + size_t data_len) +{ + if (io_data->use_sg) + return ffs_build_sg_list(&io_data->sgt, data_len); + + return kmalloc(data_len, GFP_KERNEL); +} + +static inline void ffs_free_buffer(struct ffs_io_data *io_data) +{ + if (!io_data->buf) + return; + + if (io_data->use_sg) { + sg_free_table(&io_data->sgt); + vfree(io_data->buf); + } else { + kfree(io_data->buf); + } +} + static void ffs_user_copy_worker(struct work_struct *work) { struct ffs_io_data *io_data = container_of(work, struct ffs_io_data, @@ -776,7 +841,7 @@ static void ffs_user_copy_worker(struct work_struct *work) if (io_data->read) kfree(io_data->to_free); - kfree(io_data->buf); + ffs_free_buffer(io_data); kfree(io_data); } @@ -932,6 +997,7 @@ static ssize_t ffs_epfile_io(struct file *file, struct ffs_io_data *io_data) * earlier */ gadget = epfile->ffs->gadget; + io_data->use_sg = gadget->sg_supported && data_len > PAGE_SIZE; spin_lock_irq(&epfile->ffs->eps_lock); /* In the meantime, endpoint got disabled or changed. */ @@ -948,7 +1014,7 @@ static ssize_t ffs_epfile_io(struct file *file, struct ffs_io_data *io_data) data_len = usb_ep_align_maybe(gadget, ep->ep, data_len); spin_unlock_irq(&epfile->ffs->eps_lock); - data = kmalloc(data_len, GFP_KERNEL); + data = ffs_alloc_buffer(io_data, data_len); if (unlikely(!data)) { ret = -ENOMEM; goto error_mutex; @@ -988,8 +1054,16 @@ static ssize_t ffs_epfile_io(struct file *file, struct ffs_io_data *io_data) bool interrupted = false; req = ep->req; - req->buf = data; - req->length = data_len; + if (io_data->use_sg) { + req->buf = NULL; + req->sg = io_data->sgt.sgl; + req->num_sgs = io_data->sgt.nents; + } else { + req->buf = data; + } + req->length = data_len; + + io_data->buf = data; req->context = &done; req->complete = ffs_epfile_io_complete; @@ -1022,8 +1096,14 @@ static ssize_t ffs_epfile_io(struct file *file, struct ffs_io_data *io_data) } else if (!(req = usb_ep_alloc_request(ep->ep, GFP_ATOMIC))) { ret = -ENOMEM; } else { - req->buf = data; - req->length = data_len; + if (io_data->use_sg) { + req->buf = NULL; + req->sg = io_data->sgt.sgl; + req->num_sgs = io_data->sgt.nents; + } else { + req->buf = data; + } + req->length = data_len; io_data->buf = data; io_data->ep = ep->ep; @@ -1052,7 +1132,7 @@ error_lock: error_mutex: mutex_unlock(&epfile->mutex); error: - kfree(data); + ffs_free_buffer(io_data); return ret; } @@ -1926,7 +2006,7 @@ typedef int (*ffs_os_desc_callback)(enum ffs_os_desc_type entity, static int __must_check ffs_do_single_desc(char *data, unsigned len, ffs_entity_callback entity, - void *priv) + void *priv, int *current_class) { struct usb_descriptor_header *_ds = (void *)data; u8 length; @@ -1984,6 +2064,7 @@ static int __must_check ffs_do_single_desc(char *data, unsigned len, __entity(INTERFACE, ds->bInterfaceNumber); if (ds->iInterface) __entity(STRING, ds->iInterface); + *current_class = ds->bInterfaceClass; } break; @@ -1997,11 +2078,22 @@ static int __must_check ffs_do_single_desc(char *data, unsigned len, } break; - case HID_DT_HID: - pr_vdebug("hid descriptor\n"); - if (length != sizeof(struct hid_descriptor)) - goto inv_length; - break; + case USB_TYPE_CLASS | 0x01: + if (*current_class == USB_INTERFACE_CLASS_HID) { + pr_vdebug("hid descriptor\n"); + if (length != sizeof(struct hid_descriptor)) + goto inv_length; + break; + } else if (*current_class == USB_INTERFACE_CLASS_CCID) { + pr_vdebug("ccid descriptor\n"); + if (length != sizeof(struct ccid_descriptor)) + goto inv_length; + break; + } else { + pr_vdebug("unknown descriptor: %d for class %d\n", + _ds->bDescriptorType, *current_class); + return -EINVAL; + } case USB_DT_OTG: if (length != sizeof(struct usb_otg_descriptor)) @@ -2058,6 +2150,7 @@ static int __must_check ffs_do_descs(unsigned count, char *data, unsigned len, { const unsigned _len = len; unsigned long num = 0; + int current_class = -1; ENTER(); @@ -2078,7 +2171,8 @@ static int __must_check ffs_do_descs(unsigned count, char *data, unsigned len, if (!data) return _len - len; - ret = ffs_do_single_desc(data, len, entity, priv); + ret = ffs_do_single_desc(data, len, entity, priv, + ¤t_class); if (unlikely(ret < 0)) { pr_debug("%s returns %d\n", __func__, ret); return ret; diff --git a/drivers/usb/gadget/function/uvc_queue.c b/drivers/usb/gadget/function/uvc_queue.c index f2497cb96abb..61e2c94cc0b0 100644 --- a/drivers/usb/gadget/function/uvc_queue.c +++ b/drivers/usb/gadget/function/uvc_queue.c @@ -102,7 +102,7 @@ static void uvc_buffer_queue(struct vb2_buffer *vb) spin_unlock_irqrestore(&queue->irqlock, flags); } -static struct vb2_ops uvc_queue_qops = { +static const struct vb2_ops uvc_queue_qops = { .queue_setup = uvc_queue_setup, .buf_prepare = uvc_buffer_prepare, .buf_queue = uvc_buffer_queue, diff --git a/drivers/usb/gadget/udc/aspeed-vhub/dev.c b/drivers/usb/gadget/udc/aspeed-vhub/dev.c index f0233912bace..6b1b16b17d7d 100644 --- a/drivers/usb/gadget/udc/aspeed-vhub/dev.c +++ b/drivers/usb/gadget/udc/aspeed-vhub/dev.c @@ -438,7 +438,7 @@ static int ast_vhub_udc_stop(struct usb_gadget *gadget) return 0; } -static struct usb_gadget_ops ast_vhub_udc_ops = { +static const struct usb_gadget_ops ast_vhub_udc_ops = { .get_frame = ast_vhub_udc_get_frame, .wakeup = ast_vhub_udc_wakeup, .pullup = ast_vhub_udc_pullup, diff --git a/drivers/usb/gadget/udc/renesas_usb3.c b/drivers/usb/gadget/udc/renesas_usb3.c index cdffbd1e0316..6e34f9594159 100644 --- a/drivers/usb/gadget/udc/renesas_usb3.c +++ b/drivers/usb/gadget/udc/renesas_usb3.c @@ -358,6 +358,7 @@ struct renesas_usb3 { bool extcon_host; /* check id and set EXTCON_USB_HOST */ bool extcon_usb; /* check vbus and set EXTCON_USB */ bool forced_b_device; + bool start_to_connect; }; #define gadget_to_renesas_usb3(_gadget) \ @@ -476,7 +477,8 @@ static void usb3_init_axi_bridge(struct renesas_usb3 *usb3) static void usb3_init_epc_registers(struct renesas_usb3 *usb3) { usb3_write(usb3, ~0, USB3_USB_INT_STA_1); - usb3_enable_irq_1(usb3, USB_INT_1_VBUS_CNG); + if (!usb3->workaround_for_vbus) + usb3_enable_irq_1(usb3, USB_INT_1_VBUS_CNG); } static bool usb3_wakeup_usb2_phy(struct renesas_usb3 *usb3) @@ -700,8 +702,7 @@ static void usb3_mode_config(struct renesas_usb3 *usb3, bool host, bool a_dev) usb3_set_mode_by_role_sw(usb3, host); usb3_vbus_out(usb3, a_dev); /* for A-Peripheral or forced B-device mode */ - if ((!host && a_dev) || - (usb3->workaround_for_vbus && usb3->forced_b_device)) + if ((!host && a_dev) || usb3->start_to_connect) usb3_connect(usb3); spin_unlock_irqrestore(&usb3->lock, flags); } @@ -2432,7 +2433,11 @@ static ssize_t renesas_usb3_b_device_write(struct file *file, if (copy_from_user(&buf, ubuf, min_t(size_t, sizeof(buf) - 1, count))) return -EFAULT; - if (!strncmp(buf, "1", 1)) + usb3->start_to_connect = false; + if (usb3->workaround_for_vbus && usb3->forced_b_device && + !strncmp(buf, "2", 1)) + usb3->start_to_connect = true; + else if (!strncmp(buf, "1", 1)) usb3->forced_b_device = true; else usb3->forced_b_device = false; @@ -2440,7 +2445,7 @@ static ssize_t renesas_usb3_b_device_write(struct file *file, if (usb3->workaround_for_vbus) usb3_disconnect(usb3); - /* Let this driver call usb3_connect() anyway */ + /* Let this driver call usb3_connect() if needed */ usb3_check_id(usb3); return count; diff --git a/drivers/usb/gadget/udc/s3c2410_udc.c b/drivers/usb/gadget/udc/s3c2410_udc.c index 8bf5ad7a59ad..af3e63316ace 100644 --- a/drivers/usb/gadget/udc/s3c2410_udc.c +++ b/drivers/usb/gadget/udc/s3c2410_udc.c @@ -119,7 +119,7 @@ static void dprintk(int level, const char *fmt, ...) } #endif -static int s3c2410_udc_debugfs_seq_show(struct seq_file *m, void *p) +static int s3c2410_udc_debugfs_show(struct seq_file *m, void *p) { u32 addr_reg, pwr_reg, ep_int_reg, usb_int_reg; u32 ep_int_en_reg, usb_int_en_reg, ep0_csr; @@ -168,20 +168,7 @@ static int s3c2410_udc_debugfs_seq_show(struct seq_file *m, void *p) return 0; } - -static int s3c2410_udc_debugfs_fops_open(struct inode *inode, - struct file *file) -{ - return single_open(file, s3c2410_udc_debugfs_seq_show, NULL); -} - -static const struct file_operations s3c2410_udc_debugfs_fops = { - .open = s3c2410_udc_debugfs_fops_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, - .owner = THIS_MODULE, -}; +DEFINE_SHOW_ATTRIBUTE(s3c2410_udc_debugfs); /* io macros */ diff --git a/drivers/usb/mtu3/mtu3_qmu.c b/drivers/usb/mtu3/mtu3_qmu.c index 73ac042c45a8..09f19f70fe8f 100644 --- a/drivers/usb/mtu3/mtu3_qmu.c +++ b/drivers/usb/mtu3/mtu3_qmu.c @@ -402,7 +402,7 @@ static void qmu_tx_zlp_error_handler(struct mtu3 *mtu, u8 epnum) return; } - dev_dbg(mtu->dev, "%s send ZLP for req=%p\n", __func__, mreq); + dev_dbg(mtu->dev, "%s send ZLP for req=%p\n", __func__, req); mtu3_clrbits(mbase, MU3D_EP_TXCR0(mep->epnum), TX_DMAREQEN); diff --git a/drivers/usb/renesas_usbhs/common.c b/drivers/usb/renesas_usbhs/common.c index a3e1290d682d..02c1d2bf4f86 100644 --- a/drivers/usb/renesas_usbhs/common.c +++ b/drivers/usb/renesas_usbhs/common.c @@ -874,24 +874,7 @@ static int usbhsc_resume(struct device *dev) return 0; } -static int usbhsc_runtime_nop(struct device *dev) -{ - /* Runtime PM callback shared between ->runtime_suspend() - * and ->runtime_resume(). Simply returns success. - * - * This driver re-initializes all registers after - * pm_runtime_get_sync() anyway so there is no need - * to save and restore registers here. - */ - return 0; -} - -static const struct dev_pm_ops usbhsc_pm_ops = { - .suspend = usbhsc_suspend, - .resume = usbhsc_resume, - .runtime_suspend = usbhsc_runtime_nop, - .runtime_resume = usbhsc_runtime_nop, -}; +static SIMPLE_DEV_PM_OPS(usbhsc_pm_ops, usbhsc_suspend, usbhsc_resume); static struct platform_driver renesas_usbhs_driver = { .driver = { diff --git a/include/linux/usb/ccid.h b/include/linux/usb/ccid.h new file mode 100644 index 000000000000..3431446d6864 --- /dev/null +++ b/include/linux/usb/ccid.h @@ -0,0 +1,51 @@ +/* + * Copyright (c) 2018 Vincent Pelletier + */ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __CCID_H +#define __CCID_H + +#include <linux/types.h> + +#define USB_INTERFACE_CLASS_CCID 0x0b + +struct ccid_descriptor { + __u8 bLength; + __u8 bDescriptorType; + __le16 bcdCCID; + __u8 bMaxSlotIndex; + __u8 bVoltageSupport; + __le32 dwProtocols; + __le32 dwDefaultClock; + __le32 dwMaximumClock; + __u8 bNumClockSupported; + __le32 dwDataRate; + __le32 dwMaxDataRate; + __u8 bNumDataRatesSupported; + __le32 dwMaxIFSD; + __le32 dwSynchProtocols; + __le32 dwMechanical; + __le32 dwFeatures; + __le32 dwMaxCCIDMessageLength; + __u8 bClassGetResponse; + __u8 bClassEnvelope; + __le16 wLcdLayout; + __u8 bPINSupport; + __u8 bMaxCCIDBusySlots; +} __attribute__ ((packed)); + +#endif /* __CCID_H */ diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h index e5cd84a0f84a..7595056b96c1 100644 --- a/include/linux/usb/gadget.h +++ b/include/linux/usb/gadget.h @@ -61,6 +61,8 @@ struct usb_ep; * invalidated by the error may first be dequeued. * @context: For use by the completion callback * @list: For use by the gadget driver. + * @frame_number: Reports the interval number in (micro)frame in which the + * isochronous transfer was transmitted or received. * @status: Reports completion code, zero or a negative errno. * Normally, faults block the transfer queue from advancing until * the completion callback returns. @@ -112,6 +114,8 @@ struct usb_request { void *context; struct list_head list; + unsigned frame_number; /* ISO ONLY */ + int status; unsigned actual; }; |