summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--Documentation/hwmon/lm2506618
-rw-r--r--drivers/hwmon/pmbus/Kconfig2
-rw-r--r--drivers/hwmon/pmbus/lm25066.c132
3 files changed, 139 insertions, 13 deletions
diff --git a/Documentation/hwmon/lm25066 b/Documentation/hwmon/lm25066
index 2bc5ba6aee66..c1b57d72efc3 100644
--- a/Documentation/hwmon/lm25066
+++ b/Documentation/hwmon/lm25066
@@ -1,7 +1,13 @@
-Kernel driver max8688
+Kernel driver lm25066
=====================
Supported chips:
+ * TI LM25056
+ Prefix: 'lm25056'
+ Addresses scanned: -
+ Datasheets:
+ http://www.ti.com/lit/gpn/lm25056
+ http://www.ti.com/lit/gpn/lm25056a
* National Semiconductor LM25066
Prefix: 'lm25066'
Addresses scanned: -
@@ -25,8 +31,9 @@ Author: Guenter Roeck <linux@roeck-us.net>
Description
-----------
-This driver supports hardware montoring for National Semiconductor LM25066,
-LM5064, and LM5064 Power Management, Monitoring, Control, and Protection ICs.
+This driver supports hardware montoring for National Semiconductor / TI LM25056,
+LM25066, LM5064, and LM5064 Power Management, Monitoring, Control, and
+Protection ICs.
The driver is a client driver to the core PMBus driver. Please see
Documentation/hwmon/pmbus for details on PMBus client drivers.
@@ -62,8 +69,13 @@ in1_max_alarm Input voltage high alarm.
in2_label "vmon"
in2_input Measured voltage on VAUX pin
+in2_min Minimum VAUX voltage (LM25056 only).
+in2_max Maximum VAUX voltage (LM25056 only).
+in2_min_alarm VAUX voltage low alarm (LM25056 only).
+in2_max_alarm VAUX voltage high alarm (LM25056 only).
in3_label "vout1"
+ Not supported on LM25056.
in3_input Measured output voltage.
in3_average Average measured output voltage.
in3_min Minimum output voltage.
diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
index b1adad60d6ad..39cc63edfbb0 100644
--- a/drivers/hwmon/pmbus/Kconfig
+++ b/drivers/hwmon/pmbus/Kconfig
@@ -42,7 +42,7 @@ config SENSORS_LM25066
default n
help
If you say yes here you get hardware monitoring support for National
- Semiconductor LM25066, LM5064, and LM5066.
+ Semiconductor LM25056, LM25066, LM5064, and LM5066.
This driver can also be built as a module. If so, the module will
be called lm25066.
diff --git a/drivers/hwmon/pmbus/lm25066.c b/drivers/hwmon/pmbus/lm25066.c
index 08267149dc63..6a9d6edaacb3 100644
--- a/drivers/hwmon/pmbus/lm25066.c
+++ b/drivers/hwmon/pmbus/lm25066.c
@@ -1,5 +1,5 @@
/*
- * Hardware monitoring driver for LM25066 / LM5064 / LM5066
+ * Hardware monitoring driver for LM25056 / LM25066 / LM5064 / LM5066
*
* Copyright (c) 2011 Ericsson AB.
* Copyright (c) 2013 Guenter Roeck
@@ -27,7 +27,7 @@
#include <linux/i2c.h>
#include "pmbus.h"
-enum chips { lm25066, lm5064, lm5066 };
+enum chips { lm25056, lm25066, lm5064, lm5066 };
#define LM25066_READ_VAUX 0xd0
#define LM25066_MFR_READ_IIN 0xd1
@@ -44,6 +44,14 @@ enum chips { lm25066, lm5064, lm5066 };
#define LM25066_DEV_SETUP_CL (1 << 4) /* Current limit */
+/* LM25056 only */
+
+#define LM25056_VAUX_OV_WARN_LIMIT 0xe3
+#define LM25056_VAUX_UV_WARN_LIMIT 0xe4
+
+#define LM25056_MFR_STS_VAUX_OV_WARN (1 << 1)
+#define LM25056_MFR_STS_VAUX_UV_WARN (1 << 0)
+
struct __coeff {
short m, b, R;
};
@@ -51,7 +59,34 @@ struct __coeff {
#define PSC_CURRENT_IN_L (PSC_NUM_CLASSES)
#define PSC_POWER_L (PSC_NUM_CLASSES + 1)
-static struct __coeff lm25066_coeff[3][PSC_NUM_CLASSES + 2] = {
+static struct __coeff lm25066_coeff[4][PSC_NUM_CLASSES + 2] = {
+ [lm25056] = {
+ [PSC_VOLTAGE_IN] = {
+ .m = 16296,
+ .R = -2,
+ },
+ [PSC_CURRENT_IN] = {
+ .m = 13797,
+ .R = -2,
+ },
+ [PSC_CURRENT_IN_L] = {
+ .m = 6726,
+ .R = -2,
+ },
+ [PSC_POWER] = {
+ .m = 5501,
+ .R = -3,
+ },
+ [PSC_POWER_L] = {
+ .m = 26882,
+ .R = -4,
+ },
+ [PSC_TEMPERATURE] = {
+ .m = 1580,
+ .b = -14500,
+ .R = -2,
+ },
+ },
[lm25066] = {
[PSC_VOLTAGE_IN] = {
.m = 22070,
@@ -161,6 +196,10 @@ static int lm25066_read_word_data(struct i2c_client *client, int page, int reg)
break;
/* Adjust returned value to match VIN coefficients */
switch (data->id) {
+ case lm25056:
+ /* VIN: 6.14 mV VAUX: 293 uV LSB */
+ ret = DIV_ROUND_CLOSEST(ret * 293, 6140);
+ break;
case lm25066:
/* VIN: 4.54 mV VAUX: 283.2 uV LSB */
ret = DIV_ROUND_CLOSEST(ret * 2832, 45400);
@@ -214,6 +253,58 @@ static int lm25066_read_word_data(struct i2c_client *client, int page, int reg)
return ret;
}
+static int lm25056_read_word_data(struct i2c_client *client, int page, int reg)
+{
+ int ret;
+
+ switch (reg) {
+ case PMBUS_VIRT_VMON_UV_WARN_LIMIT:
+ ret = pmbus_read_word_data(client, 0,
+ LM25056_VAUX_UV_WARN_LIMIT);
+ if (ret < 0)
+ break;
+ /* Adjust returned value to match VIN coefficients */
+ ret = DIV_ROUND_CLOSEST(ret * 293, 6140);
+ break;
+ case PMBUS_VIRT_VMON_OV_WARN_LIMIT:
+ ret = pmbus_read_word_data(client, 0,
+ LM25056_VAUX_OV_WARN_LIMIT);
+ if (ret < 0)
+ break;
+ /* Adjust returned value to match VIN coefficients */
+ ret = DIV_ROUND_CLOSEST(ret * 293, 6140);
+ break;
+ default:
+ ret = lm25066_read_word_data(client, page, reg);
+ break;
+ }
+ return ret;
+}
+
+static int lm25056_read_byte_data(struct i2c_client *client, int page, int reg)
+{
+ int ret, s;
+
+ switch (reg) {
+ case PMBUS_VIRT_STATUS_VMON:
+ ret = pmbus_read_byte_data(client, 0,
+ PMBUS_STATUS_MFR_SPECIFIC);
+ if (ret < 0)
+ break;
+ s = 0;
+ if (ret & LM25056_MFR_STS_VAUX_UV_WARN)
+ s |= PB_VOLTAGE_UV_WARNING;
+ if (ret & LM25056_MFR_STS_VAUX_OV_WARN)
+ s |= PB_VOLTAGE_OV_WARNING;
+ ret = s;
+ break;
+ default:
+ ret = -ENODATA;
+ break;
+ }
+ return ret;
+}
+
static int lm25066_write_word_data(struct i2c_client *client, int page, int reg,
u16 word)
{
@@ -243,6 +334,22 @@ static int lm25066_write_word_data(struct i2c_client *client, int page, int reg,
word);
pmbus_clear_cache(client);
break;
+ case PMBUS_VIRT_VMON_UV_WARN_LIMIT:
+ /* Adjust from VIN coefficients (for LM25056) */
+ word = DIV_ROUND_CLOSEST((int)word * 6140, 293);
+ word = ((s16)word < 0) ? 0 : clamp_val(word, 0, 0x0fff);
+ ret = pmbus_write_word_data(client, 0,
+ LM25056_VAUX_UV_WARN_LIMIT, word);
+ pmbus_clear_cache(client);
+ break;
+ case PMBUS_VIRT_VMON_OV_WARN_LIMIT:
+ /* Adjust from VIN coefficients (for LM25056) */
+ word = DIV_ROUND_CLOSEST((int)word * 6140, 293);
+ word = ((s16)word < 0) ? 0 : clamp_val(word, 0, 0x0fff);
+ ret = pmbus_write_word_data(client, 0,
+ LM25056_VAUX_OV_WARN_LIMIT, word);
+ pmbus_clear_cache(client);
+ break;
case PMBUS_VIRT_RESET_PIN_HISTORY:
ret = pmbus_write_byte(client, 0, LM25066_CLEAR_PIN_PEAK);
break;
@@ -284,12 +391,18 @@ static int lm25066_probe(struct i2c_client *client,
info->format[PSC_TEMPERATURE] = direct;
info->format[PSC_POWER] = direct;
+ info->func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_VMON
+ | PMBUS_HAVE_PIN | PMBUS_HAVE_IIN | PMBUS_HAVE_STATUS_INPUT
+ | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP;
- info->func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_VMON | PMBUS_HAVE_VOUT
- | PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_PIN | PMBUS_HAVE_IIN
- | PMBUS_HAVE_STATUS_INPUT | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP;
-
- info->read_word_data = lm25066_read_word_data;
+ if (data->id == lm25056) {
+ info->func[0] |= PMBUS_HAVE_STATUS_VMON;
+ info->read_word_data = lm25056_read_word_data;
+ info->read_byte_data = lm25056_read_byte_data;
+ } else {
+ info->func[0] |= PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT;
+ info->read_word_data = lm25066_read_word_data;
+ }
info->write_word_data = lm25066_write_word_data;
coeff = &lm25066_coeff[data->id][0];
@@ -318,6 +431,7 @@ static int lm25066_probe(struct i2c_client *client,
}
static const struct i2c_device_id lm25066_id[] = {
+ {"lm25056", lm25056},
{"lm25066", lm25066},
{"lm5064", lm5064},
{"lm5066", lm5066},
@@ -339,5 +453,5 @@ static struct i2c_driver lm25066_driver = {
module_i2c_driver(lm25066_driver);
MODULE_AUTHOR("Guenter Roeck");
-MODULE_DESCRIPTION("PMBus driver for LM25066/LM5064/LM5066");
+MODULE_DESCRIPTION("PMBus driver for LM25056/LM25066/LM5064/LM5066");
MODULE_LICENSE("GPL");