diff options
| -rw-r--r-- | drivers/mtd/maps/Kconfig | 12 | ||||
| -rw-r--r-- | drivers/mtd/maps/Makefile | 5 | ||||
| -rw-r--r-- | drivers/mtd/maps/physmap_of.c | 9 | ||||
| -rw-r--r-- | drivers/mtd/maps/physmap_of_gemini.c | 118 | ||||
| -rw-r--r-- | drivers/mtd/maps/physmap_of_gemini.h | 16 |
5 files changed, 153 insertions, 7 deletions
diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig index 5bcc896a48c3..542fdf8e81fa 100644 --- a/drivers/mtd/maps/Kconfig +++ b/drivers/mtd/maps/Kconfig @@ -75,7 +75,7 @@ config MTD_PHYSMAP_OF taken from OF device tree. config MTD_PHYSMAP_OF_VERSATILE - bool "Support ARM Versatile physmap OF" + bool "ARM Versatile OF-based physical memory map handling" depends on MTD_PHYSMAP_OF depends on MFD_SYSCON default y if (ARCH_INTEGRATOR || ARCH_VERSATILE || ARCH_REALVIEW) @@ -84,6 +84,16 @@ config MTD_PHYSMAP_OF_VERSATILE platforms, basically to add a VPP (write protection) callback so the flash can be taken out of write protection. +config MTD_PHYSMAP_OF_GEMINI + bool "Cortina Gemini OF-based physical memory map handling" + depends on MTD_PHYSMAP_OF + depends on MFD_SYSCON + default ARCH_GEMINI + help + This provides some extra DT physmap parsing for the Gemini + platforms, some detection and setting up parallel mode on the + external interface. + config MTD_PMC_MSP_EVM tristate "CFI Flash device mapped on PMC-Sierra MSP" depends on PMC_MSP && MTD_CFI diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile index 644f7d36d35d..2fec1e0c2371 100644 --- a/drivers/mtd/maps/Makefile +++ b/drivers/mtd/maps/Makefile @@ -18,9 +18,8 @@ obj-$(CONFIG_MTD_TSUNAMI) += tsunami_flash.o obj-$(CONFIG_MTD_PXA2XX) += pxa2xx-flash.o obj-$(CONFIG_MTD_PHYSMAP) += physmap.o obj-$(CONFIG_MTD_PHYSMAP_OF) += physmap_of.o -ifdef CONFIG_MTD_PHYSMAP_OF_VERSATILE -obj-$(CONFIG_MTD_PHYSMAP_OF) += physmap_of_versatile.o -endif +obj-$(CONFIG_MTD_PHYSMAP_OF_VERSATILE) += physmap_of_versatile.o +obj-$(CONFIG_MTD_PHYSMAP_OF_GEMINI) += physmap_of_gemini.o obj-$(CONFIG_MTD_PISMO) += pismo.o obj-$(CONFIG_MTD_PMC_MSP_EVM) += pmcmsp-flash.o obj-$(CONFIG_MTD_PCMCIA) += pcmciamtd.o diff --git a/drivers/mtd/maps/physmap_of.c b/drivers/mtd/maps/physmap_of.c index 3fad35942895..14e8909c9955 100644 --- a/drivers/mtd/maps/physmap_of.c +++ b/drivers/mtd/maps/physmap_of.c @@ -24,6 +24,7 @@ #include <linux/of_address.h> #include <linux/of_platform.h> #include <linux/slab.h> +#include "physmap_of_gemini.h" #include "physmap_of_versatile.h" struct of_flash_list { @@ -241,11 +242,13 @@ static int of_flash_probe(struct platform_device *dev) info->list[i].map.size = res_size; info->list[i].map.bankwidth = be32_to_cpup(width); info->list[i].map.device_node = dp; + + err = of_flash_probe_gemini(dev, dp, &info->list[i].map); + if (err) + return err; err = of_flash_probe_versatile(dev, dp, &info->list[i].map); - if (err) { - dev_err(&dev->dev, "Can't probe Versatile VPP\n"); + if (err) return err; - } err = -ENOMEM; info->list[i].map.virt = ioremap(info->list[i].map.phys, diff --git a/drivers/mtd/maps/physmap_of_gemini.c b/drivers/mtd/maps/physmap_of_gemini.c new file mode 100644 index 000000000000..e99db772143b --- /dev/null +++ b/drivers/mtd/maps/physmap_of_gemini.c @@ -0,0 +1,118 @@ +/* + * Cortina Systems Gemini OF physmap add-on + * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org> + * + * This SoC has an elaborate flash control register, so we need to + * detect and set it up when booting on this platform. + */ +#include <linux/export.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/mtd/map.h> +#include <linux/mfd/syscon.h> +#include <linux/regmap.h> +#include <linux/bitops.h> +#include "physmap_of_gemini.h" + +/* + * The Flash-relevant parts of the global status register + * These would also be relevant for a NAND driver. + */ +#define GLOBAL_STATUS 0x04 +#define FLASH_TYPE_MASK (0x3 << 24) +#define FLASH_TYPE_NAND_2K (0x3 << 24) +#define FLASH_TYPE_NAND_512 (0x2 << 24) +#define FLASH_TYPE_PARALLEL (0x1 << 24) +#define FLASH_TYPE_SERIAL (0x0 << 24) +/* if parallel */ +#define FLASH_WIDTH_16BIT (1 << 23) /* else 8 bit */ +/* if serial */ +#define FLASH_ATMEL (1 << 23) /* else STM */ + +#define FLASH_SIZE_MASK (0x3 << 21) +#define NAND_256M (0x3 << 21) /* and more */ +#define NAND_128M (0x2 << 21) +#define NAND_64M (0x1 << 21) +#define NAND_32M (0x0 << 21) +#define ATMEL_16M (0x3 << 21) /* and more */ +#define ATMEL_8M (0x2 << 21) +#define ATMEL_4M_2M (0x1 << 21) +#define ATMEL_1M (0x0 << 21) /* and less */ +#define STM_32M (1 << 22) /* and more */ +#define STM_16M (0 << 22) /* and less */ + +#define FLASH_PARALLEL_HIGH_PIN_CNT (1 << 20) /* else low pin cnt */ + +/* Miscellaneous Control Register */ +#define GLOBAL_MISC_CTRL 0x30 +#define FLASH_PADS_MASK 0x07 +#define NAND_PADS_DISABLE BIT(2) +#define PFLASH_PADS_DISABLE BIT(1) +#define SFLASH_PADS_DISABLE BIT(0) + +static const struct of_device_id syscon_match[] = { + { .compatible = "cortina,gemini-syscon" }, + { }, +}; + +int of_flash_probe_gemini(struct platform_device *pdev, + struct device_node *np, + struct map_info *map) +{ + static struct regmap *rmap; + struct device *dev = &pdev->dev; + u32 val; + int ret; + + /* Multiplatform guard */ + if (!of_device_is_compatible(np, "cortina,gemini-flash")) + return 0; + + rmap = syscon_regmap_lookup_by_phandle(np, "syscon"); + if (IS_ERR(rmap)) { + dev_err(dev, "no syscon\n"); + return PTR_ERR(rmap); + } + + ret = regmap_read(rmap, GLOBAL_STATUS, &val); + if (ret) { + dev_err(dev, "failed to read global status register\n"); + return -ENODEV; + } + dev_dbg(dev, "global status reg: %08x\n", val); + + /* + * It would be contradictory if a physmap flash was NOT parallel. + */ + if ((val & FLASH_TYPE_MASK) != FLASH_TYPE_PARALLEL) { + dev_err(dev, "flash is not parallel\n"); + return -ENODEV; + } + + /* + * Complain if DT data and hardware definition is different. + */ + if (val & FLASH_WIDTH_16BIT) { + if (map->bankwidth != 2) + dev_warn(dev, "flash hardware say flash is 16 bit wide but DT says it is %d bits wide\n", + map->bankwidth * 8); + } else { + if (map->bankwidth != 1) + dev_warn(dev, "flash hardware say flash is 8 bit wide but DT says it is %d bits wide\n", + map->bankwidth * 8); + } + + /* Activate parallel (NOR flash) mode */ + ret = regmap_update_bits(rmap, GLOBAL_MISC_CTRL, + FLASH_PADS_MASK, + SFLASH_PADS_DISABLE | NAND_PADS_DISABLE); + if (ret) { + dev_err(dev, "unable to set up physmap pads\n"); + return -ENODEV; + } + + dev_info(&pdev->dev, "initialized Gemini-specific physmap control\n"); + + return 0; +} +EXPORT_SYMBOL_GPL(of_flash_probe_gemini); diff --git a/drivers/mtd/maps/physmap_of_gemini.h b/drivers/mtd/maps/physmap_of_gemini.h new file mode 100644 index 000000000000..c675025288dd --- /dev/null +++ b/drivers/mtd/maps/physmap_of_gemini.h @@ -0,0 +1,16 @@ +#include <linux/of.h> +#include <linux/mtd/map.h> + +#ifdef CONFIG_MTD_PHYSMAP_OF_GEMINI +int of_flash_probe_gemini(struct platform_device *pdev, + struct device_node *np, + struct map_info *map); +#else +static inline +int of_flash_probe_gemini(struct platform_device *pdev, + struct device_node *np, + struct map_info *map) +{ + return 0; +} +#endif |