diff options
| -rw-r--r-- | drivers/regulator/Kconfig | 9 | ||||
| -rw-r--r-- | drivers/regulator/Makefile | 1 | ||||
| -rw-r--r-- | drivers/regulator/max1586.c | 249 | ||||
| -rw-r--r-- | include/linux/regulator/max1586.h | 52 |
4 files changed, 311 insertions, 0 deletions
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index e58c0ce65aa6..707da4d23537 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -56,6 +56,15 @@ config REGULATOR_BQ24022 charging select between 100 mA and 500 mA charging current limit. +config REGULATOR_MAX1586 + tristate "Maxim 1586/1587 voltage regulator" + depends on I2C + default n + help + This driver controls a Maxim 1586 or 1587 voltage output + regulator via I2C bus. The provided regulator is suitable + for PXA27x chips to control VCC_CORE and VCC_USIM voltages. + config REGULATOR_TWL4030 bool "TI TWL4030/TWL5030/TPS695x0 PMIC" depends on TWL4030_CORE diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index bac133afc061..1d7de87a8e1e 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -8,6 +8,7 @@ obj-$(CONFIG_REGULATOR_FIXED_VOLTAGE) += fixed.o obj-$(CONFIG_REGULATOR_VIRTUAL_CONSUMER) += virtual.o obj-$(CONFIG_REGULATOR_BQ24022) += bq24022.o +obj-$(CONFIG_REGULATOR_MAX1586) += max1586.o obj-$(CONFIG_REGULATOR_TWL4030) += twl4030-regulator.o obj-$(CONFIG_REGULATOR_WM8350) += wm8350-regulator.o obj-$(CONFIG_REGULATOR_WM8400) += wm8400-regulator.o diff --git a/drivers/regulator/max1586.c b/drivers/regulator/max1586.c new file mode 100644 index 000000000000..bbbb55fcfe8c --- /dev/null +++ b/drivers/regulator/max1586.c @@ -0,0 +1,249 @@ +/* + * max1586.c -- Voltage and current regulation for the Maxim 1586 + * + * Copyright (C) 2008 Robert Jarzmik + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#include <linux/module.h> +#include <linux/err.h> +#include <linux/i2c.h> +#include <linux/platform_device.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/max1586.h> + +#define MAX1586_V3_MAX_VSEL 31 +#define MAX1586_V6_MAX_VSEL 3 + +#define MAX1586_V3_MIN_UV 700000 +#define MAX1586_V3_MAX_UV 1475000 +#define MAX1586_V3_STEP_UV 25000 + +#define MAX1586_V6_MIN_UV 0 +#define MAX1586_V6_MAX_UV 3000000 + +#define I2C_V3_SELECT (0 << 5) +#define I2C_V6_SELECT (1 << 5) + +/* + * V3 voltage + * On I2C bus, sending a "x" byte to the max1586 means : + * set V3 to 0.700V + (x & 0x1f) * 0.025V + */ +static int max1586_v3_calc_voltage(unsigned selector) +{ + return MAX1586_V3_MIN_UV + (MAX1586_V3_STEP_UV * selector); +} + +static int max1586_v3_set(struct regulator_dev *rdev, int min_uV, int max_uV) +{ + struct i2c_client *client = rdev_get_drvdata(rdev); + unsigned selector; + u8 v3_prog; + + if (min_uV < MAX1586_V3_MIN_UV || min_uV > MAX1586_V3_MAX_UV) + return -EINVAL; + if (max_uV < MAX1586_V3_MIN_UV || max_uV > MAX1586_V3_MAX_UV) + return -EINVAL; + + selector = (min_uV - MAX1586_V3_MIN_UV) / MAX1586_V3_STEP_UV; + if (max1586_v3_calc_voltage(selector) > max_uV) + return -EINVAL; + + dev_dbg(&client->dev, "changing voltage v3 to %dmv\n", + max1586_v3_calc_voltage(selector) / 1000); + + v3_prog = I2C_V3_SELECT | (u8) selector; + return i2c_smbus_write_byte(client, v3_prog); +} + +static int max1586_v3_list(struct regulator_dev *rdev, unsigned selector) +{ + if (selector > MAX1586_V3_MAX_VSEL) + return -EINVAL; + return max1586_v3_calc_voltage(selector); +} + +/* + * V6 voltage + * On I2C bus, sending a "x" byte to the max1586 means : + * set V6 to either 0V, 1.8V, 2.5V, 3V depending on (x & 0x3) + * As regulator framework doesn't accept voltages to be 0V, we use 1uV. + */ +static int max1586_v6_calc_voltage(unsigned selector) +{ + static int voltages_uv[] = { 1, 1800000, 2500000, 3000000 }; + + return voltages_uv[selector]; +} + +static int max1586_v6_set(struct regulator_dev *rdev, int min_uV, int max_uV) +{ + struct i2c_client *client = rdev_get_drvdata(rdev); + unsigned selector; + u8 v6_prog; + + if (min_uV < MAX1586_V6_MIN_UV || min_uV > MAX1586_V6_MAX_UV) + return -EINVAL; + if (max_uV < MAX1586_V6_MIN_UV || max_uV > MAX1586_V6_MAX_UV) + return -EINVAL; + + if (min_uV >= 3000000) + selector = 3; + if (min_uV < 3000000) + selector = 2; + if (min_uV < 2500000) + selector = 1; + if (min_uV < 1800000) + selector = 0; + + if (max1586_v6_calc_voltage(selector) > max_uV) + return -EINVAL; + + dev_dbg(&client->dev, "changing voltage v6 to %dmv\n", + max1586_v6_calc_voltage(selector) / 1000); + + v6_prog = I2C_V6_SELECT | (u8) selector; + return i2c_smbus_write_byte(client, v6_prog); +} + +static int max1586_v6_list(struct regulator_dev *rdev, unsigned selector) +{ + if (selector > MAX1586_V6_MAX_VSEL) + return -EINVAL; + return max1586_v6_calc_voltage(selector); +} + +/* + * The Maxim 1586 controls V3 and V6 voltages, but offers no way of reading back + * the set up value. + */ +static struct regulator_ops max1586_v3_ops = { + .set_voltage = max1586_v3_set, + .list_voltage = max1586_v3_list, +}; + +static struct regulator_ops max1586_v6_ops = { + .set_voltage = max1586_v6_set, + .list_voltage = max1586_v6_list, +}; + +static struct regulator_desc max1586_reg[] = { + { + .name = "Output_V3", + .id = MAX1586_V3, + .ops = &max1586_v3_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = MAX1586_V3_MAX_VSEL + 1, + .owner = THIS_MODULE, + }, + { + .name = "Output_V6", + .id = MAX1586_V6, + .ops = &max1586_v6_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = MAX1586_V6_MAX_VSEL + 1, + .owner = THIS_MODULE, + }, +}; + +static int max1586_pmic_probe(struct i2c_client *client, + const struct i2c_device_id *i2c_id) +{ + struct regulator_dev **rdev; + struct max1586_platform_data *pdata = client->dev.platform_data; + int i, id, ret = 0; + + rdev = kzalloc(sizeof(struct regulator_dev *) * (MAX1586_V6 + 1), + GFP_KERNEL); + if (!rdev) + return -ENOMEM; + + ret = -EINVAL; + for (i = 0; i < pdata->num_subdevs && i <= MAX1586_V6; i++) { + id = pdata->subdevs[i].id; + if (!pdata->subdevs[i].platform_data) + continue; + if (id < MAX1586_V3 || id > MAX1586_V6) { + dev_err(&client->dev, "invalid regulator id %d\n", id); + goto err; + } + rdev[i] = regulator_register(&max1586_reg[id], &client->dev, + pdata->subdevs[i].platform_data, + client); + if (IS_ERR(rdev[i])) { + ret = PTR_ERR(rdev[i]); + dev_err(&client->dev, "failed to register %s\n", + max1586_reg[id].name); + goto err; + } + } + + i2c_set_clientdata(client, rdev); + dev_info(&client->dev, "Maxim 1586 regulator driver loaded\n"); + return 0; + +err: + while (--i >= 0) + regulator_unregister(rdev[i]); + kfree(rdev); + return ret; +} + +static int max1586_pmic_remove(struct i2c_client *client) +{ + struct regulator_dev **rdev = i2c_get_clientdata(client); + int i; + + for (i = 0; i <= MAX1586_V6; i++) + if (rdev[i]) + regulator_unregister(rdev[i]); + kfree(rdev); + i2c_set_clientdata(client, NULL); + + return 0; +} + +static const struct i2c_device_id max1586_id[] = { + { "max1586", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, max1586_id); + +static struct i2c_driver max1586_pmic_driver = { + .probe = max1586_pmic_probe, + .remove = max1586_pmic_remove, + .driver = { + .name = "max1586", + }, + .id_table = max1586_id, +}; + +static int __init max1586_pmic_init(void) +{ + return i2c_add_driver(&max1586_pmic_driver); +} +subsys_initcall(max1586_pmic_init); + +static void __exit max1586_pmic_exit(void) +{ + i2c_del_driver(&max1586_pmic_driver); +} +module_exit(max1586_pmic_exit); + +/* Module information */ +MODULE_DESCRIPTION("MAXIM 1586 voltage regulator driver"); +MODULE_AUTHOR("Robert Jarzmik"); +MODULE_LICENSE("GPL"); diff --git a/include/linux/regulator/max1586.h b/include/linux/regulator/max1586.h new file mode 100644 index 000000000000..2056973396b6 --- /dev/null +++ b/include/linux/regulator/max1586.h @@ -0,0 +1,52 @@ +/* + * max1586.h -- Voltage regulation for the Maxim 1586 + * + * Copyright (C) 2008 Robert Jarzmik + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef REGULATOR_MAX1586 +#define REGULATOR_MAX1586 + +#include <linux/regulator/machine.h> + +#define MAX1586_V3 0 +#define MAX1586_V6 1 + +/** + * max1586_subdev_data - regulator data + * @id: regulator Id (either MAX1586_V3 or MAX1586_V6) + * @name: regulator cute name (example for V3: "vcc_core") + * @platform_data: regulator init data (contraints, supplies, ...) + */ +struct max1586_subdev_data { + int id; + char *name; + struct regulator_init_data *platform_data; +}; + +/** + * max1586_platform_data - platform data for max1586 + * @num_subdevs: number of regultors used (may be 1 or 2) + * @subdevs: regulator used + * At most, there will be a regulator for V3 and one for V6 voltages. + */ +struct max1586_platform_data { + int num_subdevs; + struct max1586_subdev_data *subdevs; +}; + +#endif |