diff options
| -rw-r--r-- | drivers/regulator/Kconfig | 7 | ||||
| -rw-r--r-- | drivers/regulator/Makefile | 1 | ||||
| -rw-r--r-- | drivers/regulator/sc2731-regulator.c | 256 |
3 files changed, 264 insertions, 0 deletions
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 96cd55f9e3c5..b27417ca188a 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -744,6 +744,13 @@ config REGULATOR_S5M8767 via I2C bus. S5M8767A have 9 Bucks and 28 LDOs output and supports DVS mode with 8bits of output voltage control. +config REGULATOR_SC2731 + tristate "Spreadtrum SC2731 power regulator driver" + depends on MFD_SC27XX_PMIC || COMPILE_TEST + help + This driver provides support for the voltage regulators on the + SC2731 PMIC. + config REGULATOR_SKY81452 tristate "Skyworks Solutions SKY81452 voltage regulator" depends on MFD_SKY81452 diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index 80ffc57a9ca3..19fea09ba10a 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -95,6 +95,7 @@ obj-$(CONFIG_REGULATOR_RT5033) += rt5033-regulator.o obj-$(CONFIG_REGULATOR_S2MPA01) += s2mpa01.o obj-$(CONFIG_REGULATOR_S2MPS11) += s2mps11.o obj-$(CONFIG_REGULATOR_S5M8767) += s5m8767.o +obj-$(CONFIG_REGULATOR_SC2731) += sc2731-regulator.o obj-$(CONFIG_REGULATOR_SKY81452) += sky81452-regulator.o obj-$(CONFIG_REGULATOR_STM32_VREFBUF) += stm32-vrefbuf.o obj-$(CONFIG_REGULATOR_STW481X_VMMC) += stw481x-vmmc.o diff --git a/drivers/regulator/sc2731-regulator.c b/drivers/regulator/sc2731-regulator.c new file mode 100644 index 000000000000..794fcd504b3d --- /dev/null +++ b/drivers/regulator/sc2731-regulator.c @@ -0,0 +1,256 @@ + //SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2017 Spreadtrum Communications Inc. + */ + +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/of_regulator.h> + +/* + * SC2731 regulator lock register + */ +#define SC2731_PWR_WR_PROT_VALUE 0xf0c +#define SC2731_WR_UNLOCK 0x6e7f + +/* + * SC2731 enable register + */ +#define SC2731_POWER_PD_SW 0xc28 +#define SC2731_LDO_CAMA0_PD 0xcfc +#define SC2731_LDO_CAMA1_PD 0xd04 +#define SC2731_LDO_CAMMOT_PD 0xd0c +#define SC2731_LDO_VLDO_PD 0xd6c +#define SC2731_LDO_EMMCCORE_PD 0xd2c +#define SC2731_LDO_SDCORE_PD 0xd74 +#define SC2731_LDO_SDIO_PD 0xd70 +#define SC2731_LDO_WIFIPA_PD 0xd4c +#define SC2731_LDO_USB33_PD 0xd5c +#define SC2731_LDO_CAMD0_PD 0xd7c +#define SC2731_LDO_CAMD1_PD 0xd84 +#define SC2731_LDO_CON_PD 0xd8c +#define SC2731_LDO_CAMIO_PD 0xd94 +#define SC2731_LDO_SRAM_PD 0xd78 + +/* + * SC2731 enable mask + */ +#define SC2731_DCDC_CPU0_PD_MASK BIT(4) +#define SC2731_DCDC_CPU1_PD_MASK BIT(3) +#define SC2731_DCDC_RF_PD_MASK BIT(11) +#define SC2731_LDO_CAMA0_PD_MASK BIT(0) +#define SC2731_LDO_CAMA1_PD_MASK BIT(0) +#define SC2731_LDO_CAMMOT_PD_MASK BIT(0) +#define SC2731_LDO_VLDO_PD_MASK BIT(0) +#define SC2731_LDO_EMMCCORE_PD_MASK BIT(0) +#define SC2731_LDO_SDCORE_PD_MASK BIT(0) +#define SC2731_LDO_SDIO_PD_MASK BIT(0) +#define SC2731_LDO_WIFIPA_PD_MASK BIT(0) +#define SC2731_LDO_USB33_PD_MASK BIT(0) +#define SC2731_LDO_CAMD0_PD_MASK BIT(0) +#define SC2731_LDO_CAMD1_PD_MASK BIT(0) +#define SC2731_LDO_CON_PD_MASK BIT(0) +#define SC2731_LDO_CAMIO_PD_MASK BIT(0) +#define SC2731_LDO_SRAM_PD_MASK BIT(0) + +/* + * SC2731 vsel register + */ +#define SC2731_DCDC_CPU0_VOL 0xc54 +#define SC2731_DCDC_CPU1_VOL 0xc64 +#define SC2731_DCDC_RF_VOL 0xcb8 +#define SC2731_LDO_CAMA0_VOL 0xd00 +#define SC2731_LDO_CAMA1_VOL 0xd08 +#define SC2731_LDO_CAMMOT_VOL 0xd10 +#define SC2731_LDO_VLDO_VOL 0xd28 +#define SC2731_LDO_EMMCCORE_VOL 0xd30 +#define SC2731_LDO_SDCORE_VOL 0xd38 +#define SC2731_LDO_SDIO_VOL 0xd40 +#define SC2731_LDO_WIFIPA_VOL 0xd50 +#define SC2731_LDO_USB33_VOL 0xd60 +#define SC2731_LDO_CAMD0_VOL 0xd80 +#define SC2731_LDO_CAMD1_VOL 0xd88 +#define SC2731_LDO_CON_VOL 0xd90 +#define SC2731_LDO_CAMIO_VOL 0xd98 +#define SC2731_LDO_SRAM_VOL 0xdB0 + +/* + * SC2731 vsel register mask + */ +#define SC2731_DCDC_CPU0_VOL_MASK GENMASK(8, 0) +#define SC2731_DCDC_CPU1_VOL_MASK GENMASK(8, 0) +#define SC2731_DCDC_RF_VOL_MASK GENMASK(8, 0) +#define SC2731_LDO_CAMA0_VOL_MASK GENMASK(7, 0) +#define SC2731_LDO_CAMA1_VOL_MASK GENMASK(7, 0) +#define SC2731_LDO_CAMMOT_VOL_MASK GENMASK(7, 0) +#define SC2731_LDO_VLDO_VOL_MASK GENMASK(7, 0) +#define SC2731_LDO_EMMCCORE_VOL_MASK GENMASK(7, 0) +#define SC2731_LDO_SDCORE_VOL_MASK GENMASK(7, 0) +#define SC2731_LDO_SDIO_VOL_MASK GENMASK(7, 0) +#define SC2731_LDO_WIFIPA_VOL_MASK GENMASK(7, 0) +#define SC2731_LDO_USB33_VOL_MASK GENMASK(7, 0) +#define SC2731_LDO_CAMD0_VOL_MASK GENMASK(6, 0) +#define SC2731_LDO_CAMD1_VOL_MASK GENMASK(6, 0) +#define SC2731_LDO_CON_VOL_MASK GENMASK(6, 0) +#define SC2731_LDO_CAMIO_VOL_MASK GENMASK(6, 0) +#define SC2731_LDO_SRAM_VOL_MASK GENMASK(6, 0) + +enum sc2731_regulator_id { + SC2731_BUCK_CPU0, + SC2731_BUCK_CPU1, + SC2731_BUCK_RF, + SC2731_LDO_CAMA0, + SC2731_LDO_CAMA1, + SC2731_LDO_CAMMOT, + SC2731_LDO_VLDO, + SC2731_LDO_EMMCCORE, + SC2731_LDO_SDCORE, + SC2731_LDO_SDIO, + SC2731_LDO_WIFIPA, + SC2731_LDO_USB33, + SC2731_LDO_CAMD0, + SC2731_LDO_CAMD1, + SC2731_LDO_CON, + SC2731_LDO_CAMIO, + SC2731_LDO_SRAM, +}; + +static const struct regulator_ops sc2731_regu_linear_ops = { + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .list_voltage = regulator_list_voltage_linear, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_sel = regulator_set_voltage_sel_regmap, +}; + +#define SC2731_REGU_LINEAR(_id, en_reg, en_mask, vreg, vmask, \ + vstep, vmin, vmax) { \ + .name = #_id, \ + .of_match = of_match_ptr(#_id), \ + .ops = &sc2731_regu_linear_ops, \ + .type = REGULATOR_VOLTAGE, \ + .id = SC2731_##_id, \ + .owner = THIS_MODULE, \ + .min_uV = vmin, \ + .n_voltages = ((vmax) - (vmin)) / (vstep) + 1, \ + .uV_step = vstep, \ + .enable_is_inverted = true, \ + .enable_val = 0, \ + .enable_reg = en_reg, \ + .enable_mask = en_mask, \ + .vsel_reg = vreg, \ + .vsel_mask = vmask, \ +} + +static struct regulator_desc regulators[] = { + SC2731_REGU_LINEAR(BUCK_CPU0, SC2731_POWER_PD_SW, + SC2731_DCDC_CPU0_PD_MASK, SC2731_DCDC_CPU0_VOL, + SC2731_DCDC_CPU0_VOL_MASK, 3125, 400000, 1996875), + SC2731_REGU_LINEAR(BUCK_CPU1, SC2731_POWER_PD_SW, + SC2731_DCDC_CPU1_PD_MASK, SC2731_DCDC_CPU1_VOL, + SC2731_DCDC_CPU1_VOL_MASK, 3125, 400000, 1996875), + SC2731_REGU_LINEAR(BUCK_RF, SC2731_POWER_PD_SW, SC2731_DCDC_RF_PD_MASK, + SC2731_DCDC_RF_VOL, SC2731_DCDC_RF_VOL_MASK, + 3125, 600000, 2196875), + SC2731_REGU_LINEAR(LDO_CAMA0, SC2731_LDO_CAMA0_PD, + SC2731_LDO_CAMA0_PD_MASK, SC2731_LDO_CAMA0_VOL, + SC2731_LDO_CAMA0_VOL_MASK, 10000, 1200000, 3750000), + SC2731_REGU_LINEAR(LDO_CAMA1, SC2731_LDO_CAMA1_PD, + SC2731_LDO_CAMA1_PD_MASK, SC2731_LDO_CAMA1_VOL, + SC2731_LDO_CAMA1_VOL_MASK, 10000, 1200000, 3750000), + SC2731_REGU_LINEAR(LDO_CAMMOT, SC2731_LDO_CAMMOT_PD, + SC2731_LDO_CAMMOT_PD_MASK, SC2731_LDO_CAMMOT_VOL, + SC2731_LDO_CAMMOT_VOL_MASK, 10000, 1200000, 3750000), + SC2731_REGU_LINEAR(LDO_VLDO, SC2731_LDO_VLDO_PD, + SC2731_LDO_VLDO_PD_MASK, SC2731_LDO_VLDO_VOL, + SC2731_LDO_VLDO_VOL_MASK, 10000, 1200000, 3750000), + SC2731_REGU_LINEAR(LDO_EMMCCORE, SC2731_LDO_EMMCCORE_PD, + SC2731_LDO_EMMCCORE_PD_MASK, SC2731_LDO_EMMCCORE_VOL, + SC2731_LDO_EMMCCORE_VOL_MASK, 10000, 1200000, + 3750000), + SC2731_REGU_LINEAR(LDO_SDCORE, SC2731_LDO_SDCORE_PD, + SC2731_LDO_SDCORE_PD_MASK, SC2731_LDO_SDCORE_VOL, + SC2731_LDO_SDCORE_VOL_MASK, 10000, 1200000, 3750000), + SC2731_REGU_LINEAR(LDO_SDIO, SC2731_LDO_SDIO_PD, + SC2731_LDO_SDIO_PD_MASK, SC2731_LDO_SDIO_VOL, + SC2731_LDO_SDIO_VOL_MASK, 10000, 1200000, 3750000), + SC2731_REGU_LINEAR(LDO_WIFIPA, SC2731_LDO_WIFIPA_PD, + SC2731_LDO_WIFIPA_PD_MASK, SC2731_LDO_WIFIPA_VOL, + SC2731_LDO_WIFIPA_VOL_MASK, 10000, 1200000, 3750000), + SC2731_REGU_LINEAR(LDO_USB33, SC2731_LDO_USB33_PD, + SC2731_LDO_USB33_PD_MASK, SC2731_LDO_USB33_VOL, + SC2731_LDO_USB33_VOL_MASK, 10000, 1200000, 3750000), + SC2731_REGU_LINEAR(LDO_CAMD0, SC2731_LDO_CAMD0_PD, + SC2731_LDO_CAMD0_PD_MASK, SC2731_LDO_CAMD0_VOL, + SC2731_LDO_CAMD0_VOL_MASK, 6250, 1000000, 1793750), + SC2731_REGU_LINEAR(LDO_CAMD1, SC2731_LDO_CAMD1_PD, + SC2731_LDO_CAMD1_PD_MASK, SC2731_LDO_CAMD1_VOL, + SC2731_LDO_CAMD1_VOL_MASK, 6250, 1000000, 1793750), + SC2731_REGU_LINEAR(LDO_CON, SC2731_LDO_CON_PD, + SC2731_LDO_CON_PD_MASK, SC2731_LDO_CON_VOL, + SC2731_LDO_CON_VOL_MASK, 6250, 1000000, 1793750), + SC2731_REGU_LINEAR(LDO_CAMIO, SC2731_LDO_CAMIO_PD, + SC2731_LDO_CAMIO_PD_MASK, SC2731_LDO_CAMIO_VOL, + SC2731_LDO_CAMIO_VOL_MASK, 6250, 1000000, 1793750), + SC2731_REGU_LINEAR(LDO_SRAM, SC2731_LDO_SRAM_PD, + SC2731_LDO_SRAM_PD_MASK, SC2731_LDO_SRAM_VOL, + SC2731_LDO_SRAM_VOL_MASK, 6250, 1000000, 1793750), +}; + +static int sc2731_regulator_unlock(struct regmap *regmap) +{ + return regmap_write(regmap, SC2731_PWR_WR_PROT_VALUE, + SC2731_WR_UNLOCK); +} + +static int sc2731_regulator_probe(struct platform_device *pdev) +{ + int i, ret; + struct regmap *regmap; + struct regulator_config config = { }; + struct regulator_dev *rdev; + + regmap = dev_get_regmap(pdev->dev.parent, NULL); + if (!regmap) { + dev_err(&pdev->dev, "failed to get regmap.\n"); + return -ENODEV; + } + + ret = sc2731_regulator_unlock(regmap); + if (ret) { + dev_err(&pdev->dev, "failed to release regulator lock\n"); + return ret; + } + + config.dev = &pdev->dev; + config.regmap = regmap; + + for (i = 0; i < ARRAY_SIZE(regulators); i++) { + rdev = devm_regulator_register(&pdev->dev, ®ulators[i], + &config); + if (IS_ERR(rdev)) { + dev_err(&pdev->dev, "failed to register regulator %s\n", + regulators[i].name); + return PTR_ERR(rdev); + } + } + + return 0; +} + +static struct platform_driver sc2731_regulator_driver = { + .driver = { + .name = "sc27xx-regulator", + }, + .probe = sc2731_regulator_probe, +}; + +module_platform_driver(sc2731_regulator_driver); + +MODULE_AUTHOR("Chen Junhui <erick.chen@spreadtrum.com>"); +MODULE_DESCRIPTION("Spreadtrum SC2731 regulator driver"); +MODULE_LICENSE("GPL v2"); |