summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--MAINTAINERS5
-rw-r--r--drivers/clk/Kconfig10
-rw-r--r--drivers/clk/Makefile1
-rw-r--r--drivers/clk/clk-versaclock5.c791
4 files changed, 807 insertions, 0 deletions
diff --git a/MAINTAINERS b/MAINTAINERS
index cfff2c9e3d94..452df181e261 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6185,6 +6185,11 @@ S: Maintained
F: drivers/mfd/lpc_ich.c
F: drivers/gpio/gpio-ich.c
+IDT VersaClock 5 CLOCK DRIVER
+M: Marek Vasut <marek.vasut@gmail.com>
+S: Maintained
+F: drivers/clk/clk-versaclock5.c
+
IDE SUBSYSTEM
M: "David S. Miller" <davem@davemloft.net>
L: linux-ide@vger.kernel.org
diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index 664abe9e085b..9356ab4b7d76 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -199,6 +199,16 @@ config COMMON_CLK_OXNAS
---help---
Support for the OXNAS SoC Family clocks.
+config COMMON_CLK_VC5
+ tristate "Clock driver for IDT VersaClock5 devices"
+ depends on I2C
+ depends on OF
+ select REGMAP_I2C
+ help
+ ---help---
+ This driver supports the IDT VersaClock5 programmable clock
+ generator.
+
source "drivers/clk/bcm/Kconfig"
source "drivers/clk/hisilicon/Kconfig"
source "drivers/clk/mediatek/Kconfig"
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index 925081ec14c0..e0754d9fc2df 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -46,6 +46,7 @@ obj-$(CONFIG_ARCH_TANGO) += clk-tango4.o
obj-$(CONFIG_CLK_TWL6040) += clk-twl6040.o
obj-$(CONFIG_ARCH_U300) += clk-u300.o
obj-$(CONFIG_ARCH_VT8500) += clk-vt8500.o
+obj-$(CONFIG_COMMON_CLK_VC5) += clk-versaclock5.o
obj-$(CONFIG_COMMON_CLK_WM831X) += clk-wm831x.o
obj-$(CONFIG_COMMON_CLK_XGENE) += clk-xgene.o
diff --git a/drivers/clk/clk-versaclock5.c b/drivers/clk/clk-versaclock5.c
new file mode 100644
index 000000000000..56741f3cf0a3
--- /dev/null
+++ b/drivers/clk/clk-versaclock5.c
@@ -0,0 +1,791 @@
+/*
+ * Driver for IDT Versaclock 5
+ *
+ * Copyright (C) 2017 Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/*
+ * Possible optimizations:
+ * - Use spread spectrum
+ * - Use integer divider in FOD if applicable
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/rational.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+/* VersaClock5 registers */
+#define VC5_OTP_CONTROL 0x00
+
+/* Factory-reserved register block */
+#define VC5_RSVD_DEVICE_ID 0x01
+#define VC5_RSVD_ADC_GAIN_7_0 0x02
+#define VC5_RSVD_ADC_GAIN_15_8 0x03
+#define VC5_RSVD_ADC_OFFSET_7_0 0x04
+#define VC5_RSVD_ADC_OFFSET_15_8 0x05
+#define VC5_RSVD_TEMPY 0x06
+#define VC5_RSVD_OFFSET_TBIN 0x07
+#define VC5_RSVD_GAIN 0x08
+#define VC5_RSVD_TEST_NP 0x09
+#define VC5_RSVD_UNUSED 0x0a
+#define VC5_RSVD_BANDGAP_TRIM_UP 0x0b
+#define VC5_RSVD_BANDGAP_TRIM_DN 0x0c
+#define VC5_RSVD_CLK_R_12_CLK_AMP_4 0x0d
+#define VC5_RSVD_CLK_R_34_CLK_AMP_4 0x0e
+#define VC5_RSVD_CLK_AMP_123 0x0f
+
+/* Configuration register block */
+#define VC5_PRIM_SRC_SHDN 0x10
+#define VC5_PRIM_SRC_SHDN_EN_XTAL BIT(7)
+#define VC5_PRIM_SRC_SHDN_EN_CLKIN BIT(6)
+#define VC5_PRIM_SRC_SHDN_SP BIT(1)
+#define VC5_PRIM_SRC_SHDN_EN_GBL_SHDN BIT(0)
+
+#define VC5_VCO_BAND 0x11
+#define VC5_XTAL_X1_LOAD_CAP 0x12
+#define VC5_XTAL_X2_LOAD_CAP 0x13
+#define VC5_REF_DIVIDER 0x15
+#define VC5_REF_DIVIDER_SEL_PREDIV2 BIT(7)
+#define VC5_REF_DIVIDER_REF_DIV(n) ((n) & 0x3f)
+
+#define VC5_VCO_CTRL_AND_PREDIV 0x16
+#define VC5_VCO_CTRL_AND_PREDIV_BYPASS_PREDIV BIT(7)
+
+#define VC5_FEEDBACK_INT_DIV 0x17
+#define VC5_FEEDBACK_INT_DIV_BITS 0x18
+#define VC5_FEEDBACK_FRAC_DIV(n) (0x19 + (n))
+#define VC5_RC_CONTROL0 0x1e
+#define VC5_RC_CONTROL1 0x1f
+/* Register 0x20 is factory reserved */
+
+/* Output divider control for divider 1,2,3,4 */
+#define VC5_OUT_DIV_CONTROL(idx) (0x21 + ((idx) * 0x10))
+#define VC5_OUT_DIV_CONTROL_RESET BIT(7)
+#define VC5_OUT_DIV_CONTROL_SELB_NORM BIT(3)
+#define VC5_OUT_DIV_CONTROL_SEL_EXT BIT(2)
+#define VC5_OUT_DIV_CONTROL_INT_MODE BIT(1)
+#define VC5_OUT_DIV_CONTROL_EN_FOD BIT(0)
+
+#define VC5_OUT_DIV_FRAC(idx, n) (0x22 + ((idx) * 0x10) + (n))
+#define VC5_OUT_DIV_FRAC4_OD_SCEE BIT(1)
+
+#define VC5_OUT_DIV_STEP_SPREAD(idx, n) (0x26 + ((idx) * 0x10) + (n))
+#define VC5_OUT_DIV_SPREAD_MOD(idx, n) (0x29 + ((idx) * 0x10) + (n))
+#define VC5_OUT_DIV_SKEW_INT(idx, n) (0x2b + ((idx) * 0x10) + (n))
+#define VC5_OUT_DIV_INT(idx, n) (0x2d + ((idx) * 0x10) + (n))
+#define VC5_OUT_DIV_SKEW_FRAC(idx) (0x2f + ((idx) * 0x10))
+/* Registers 0x30, 0x40, 0x50 are factory reserved */
+
+/* Clock control register for clock 1,2 */
+#define VC5_CLK_OUTPUT_CFG(idx, n) (0x60 + ((idx) * 0x2) + (n))
+#define VC5_CLK_OUTPUT_CFG1_EN_CLKBUF BIT(0)
+
+#define VC5_CLK_OE_SHDN 0x68
+#define VC5_CLK_OS_SHDN 0x69
+
+#define VC5_GLOBAL_REGISTER 0x76
+#define VC5_GLOBAL_REGISTER_GLOBAL_RESET BIT(5)
+
+/* PLL/VCO runs between 2.5 GHz and 3.0 GHz */
+#define VC5_PLL_VCO_MIN 2500000000UL
+#define VC5_PLL_VCO_MAX 3000000000UL
+
+/* VC5 Input mux settings */
+#define VC5_MUX_IN_XIN BIT(0)
+#define VC5_MUX_IN_CLKIN BIT(1)
+
+/* Supported IDT VC5 models. */
+enum vc5_model {
+ IDT_VC5_5P49V5923,
+ IDT_VC5_5P49V5933,
+};
+
+struct vc5_driver_data;
+
+struct vc5_hw_data {
+ struct clk_hw hw;
+ struct vc5_driver_data *vc5;
+ u32 div_int;
+ u32 div_frc;
+ unsigned int num;
+};
+
+struct vc5_driver_data {
+ struct i2c_client *client;
+ struct regmap *regmap;
+ enum vc5_model model;
+
+ struct clk *pin_xin;
+ struct clk *pin_clkin;
+ unsigned char clk_mux_ins;
+ struct clk_hw clk_mux;
+ struct vc5_hw_data clk_pll;
+ struct vc5_hw_data clk_fod[2];
+ struct vc5_hw_data clk_out[3];
+};
+
+static const char * const vc5_mux_names[] = {
+ "mux"
+};
+
+static const char * const vc5_pll_names[] = {
+ "pll"
+};
+
+static const char * const vc5_fod_names[] = {
+ "fod0", "fod1", "fod2", "fod3",
+};
+
+static const char * const vc5_clk_out_names[] = {
+ "out0_sel_i2cb", "out1", "out2", "out3", "out4",
+};
+
+/*
+ * VersaClock5 i2c regmap
+ */
+static bool vc5_regmap_is_writeable(struct device *dev, unsigned int reg)
+{
+ /* Factory reserved regs, make them read-only */
+ if (reg <= 0xf)
+ return false;
+
+ /* Factory reserved regs, make them read-only */
+ if (reg == 0x14 || reg == 0x1c || reg == 0x1d)
+ return false;
+
+ return true;
+}
+
+static const struct regmap_config vc5_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .cache_type = REGCACHE_RBTREE,
+ .max_register = 0x76,
+ .writeable_reg = vc5_regmap_is_writeable,
+};
+
+/*
+ * VersaClock5 input multiplexer between XTAL and CLKIN divider
+ */
+static unsigned char vc5_mux_get_parent(struct clk_hw *hw)
+{
+ struct vc5_driver_data *vc5 =
+ container_of(hw, struct vc5_driver_data, clk_mux);
+ const u8 mask = VC5_PRIM_SRC_SHDN_EN_XTAL | VC5_PRIM_SRC_SHDN_EN_CLKIN;
+ unsigned int src;
+
+ regmap_read(vc5->regmap, VC5_PRIM_SRC_SHDN, &src);
+ src &= mask;
+
+ if (src == VC5_PRIM_SRC_SHDN_EN_XTAL)
+ return 0;
+
+ if (src == VC5_PRIM_SRC_SHDN_EN_CLKIN)
+ return 1;
+
+ dev_warn(&vc5->client->dev,
+ "Invalid clock input configuration (%02x)\n", src);
+ return 0;
+}
+
+static int vc5_mux_set_parent(struct clk_hw *hw, u8 index)
+{
+ struct vc5_driver_data *vc5 =
+ container_of(hw, struct vc5_driver_data, clk_mux);
+ const u8 mask = VC5_PRIM_SRC_SHDN_EN_XTAL | VC5_PRIM_SRC_SHDN_EN_CLKIN;
+ u8 src;
+
+ if ((index > 1) || !vc5->clk_mux_ins)
+ return -EINVAL;
+
+ if (vc5->clk_mux_ins == (VC5_MUX_IN_CLKIN | VC5_MUX_IN_XIN)) {
+ if (index == 0)
+ src = VC5_PRIM_SRC_SHDN_EN_XTAL;
+ if (index == 1)
+ src = VC5_PRIM_SRC_SHDN_EN_CLKIN;
+ } else {
+ if (index != 0)
+ return -EINVAL;
+
+ if (vc5->clk_mux_ins == VC5_MUX_IN_XIN)
+ src = VC5_PRIM_SRC_SHDN_EN_XTAL;
+ if (vc5->clk_mux_ins == VC5_MUX_IN_CLKIN)
+ src = VC5_PRIM_SRC_SHDN_EN_CLKIN;
+ }
+
+ return regmap_update_bits(vc5->regmap, VC5_PRIM_SRC_SHDN, mask, src);
+}
+
+static unsigned long vc5_mux_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct vc5_driver_data *vc5 =
+ container_of(hw, struct vc5_driver_data, clk_mux);
+ unsigned int prediv, div;
+
+ regmap_read(vc5->regmap, VC5_VCO_CTRL_AND_PREDIV, &prediv);
+
+ /* The bypass_prediv is set, PLL fed from Ref_in directly. */
+ if (prediv & VC5_VCO_CTRL_AND_PREDIV_BYPASS_PREDIV)
+ return parent_rate;
+
+ regmap_read(vc5->regmap, VC5_REF_DIVIDER, &div);
+
+ /* The Sel_prediv2 is set, PLL fed from prediv2 (Ref_in / 2) */
+ if (div & VC5_REF_DIVIDER_SEL_PREDIV2)
+ return parent_rate / 2;
+ else
+ return parent_rate / VC5_REF_DIVIDER_REF_DIV(div);
+}
+
+static long vc5_mux_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *parent_rate)
+{
+ unsigned long idiv;
+
+ /* PLL cannot operate with input clock above 50 MHz. */
+ if (rate > 50000000)
+ return -EINVAL;
+
+ /* CLKIN within range of PLL input, feed directly to PLL. */
+ if (*parent_rate <= 50000000)
+ return *parent_rate;
+
+ idiv = DIV_ROUND_UP(*parent_rate, rate);
+ if (idiv > 127)
+ return -EINVAL;
+
+ return *parent_rate / idiv;
+}
+
+static int vc5_mux_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct vc5_driver_data *vc5 =
+ container_of(hw, struct vc5_driver_data, clk_mux);
+ unsigned long idiv;
+ u8 div;
+
+ /* CLKIN within range of PLL input, feed directly to PLL. */
+ if (parent_rate <= 50000000) {
+ regmap_update_bits(vc5->regmap, VC5_VCO_CTRL_AND_PREDIV,
+ VC5_VCO_CTRL_AND_PREDIV_BYPASS_PREDIV,
+ VC5_VCO_CTRL_AND_PREDIV_BYPASS_PREDIV);
+ regmap_update_bits(vc5->regmap, VC5_REF_DIVIDER, 0xff, 0x00);
+ return 0;
+ }
+
+ idiv = DIV_ROUND_UP(parent_rate, rate);
+
+ /* We have dedicated div-2 predivider. */
+ if (idiv == 2)
+ div = VC5_REF_DIVIDER_SEL_PREDIV2;
+ else
+ div = VC5_REF_DIVIDER_REF_DIV(idiv);
+
+ regmap_update_bits(vc5->regmap, VC5_REF_DIVIDER, 0xff, div);
+ regmap_update_bits(vc5->regmap, VC5_VCO_CTRL_AND_PREDIV,
+ VC5_VCO_CTRL_AND_PREDIV_BYPASS_PREDIV, 0);
+
+ return 0;
+}
+
+static const struct clk_ops vc5_mux_ops = {
+ .set_parent = vc5_mux_set_parent,
+ .get_parent = vc5_mux_get_parent,
+ .recalc_rate = vc5_mux_recalc_rate,
+ .round_rate = vc5_mux_round_rate,
+ .set_rate = vc5_mux_set_rate,
+};
+
+/*
+ * VersaClock5 PLL/VCO
+ */
+static unsigned long vc5_pll_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct vc5_hw_data *hwdata = container_of(hw, struct vc5_hw_data, hw);
+ struct vc5_driver_data *vc5 = hwdata->vc5;
+ u32 div_int, div_frc;
+ u8 fb[5];
+
+ regmap_bulk_read(vc5->regmap, VC5_FEEDBACK_INT_DIV, fb, 5);
+
+ div_int = (fb[0] << 4) | (fb[1] >> 4);
+ div_frc = (fb[2] << 16) | (fb[3] << 8) | fb[4];
+
+ /* The PLL divider has 12 integer bits and 24 fractional bits */
+ return (parent_rate * div_int) + ((parent_rate * div_frc) >> 24);
+}
+
+static long vc5_pll_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *parent_rate)
+{
+ struct vc5_hw_data *hwdata = container_of(hw, struct vc5_hw_data, hw);
+ u32 div_int;
+ u64 div_frc;
+
+ if (rate < VC5_PLL_VCO_MIN)
+ rate = VC5_PLL_VCO_MIN;
+ if (rate > VC5_PLL_VCO_MAX)
+ rate = VC5_PLL_VCO_MAX;
+
+ /* Determine integer part, which is 12 bit wide */
+ div_int = rate / *parent_rate;
+ if (div_int > 0xfff)
+ rate = *parent_rate * 0xfff;
+
+ /* Determine best fractional part, which is 24 bit wide */
+ div_frc = rate % *parent_rate;
+ div_frc *= BIT(24) - 1;
+ do_div(div_frc, *parent_rate);
+
+ hwdata->div_int = div_int;
+ hwdata->div_frc = (u32)div_frc;
+
+ return (*parent_rate * div_int) + ((*parent_rate * div_frc) >> 24);
+}
+
+static int vc5_pll_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct vc5_hw_data *hwdata = container_of(hw, struct vc5_hw_data, hw);
+ struct vc5_driver_data *vc5 = hwdata->vc5;
+ u8 fb[5];
+
+ fb[0] = hwdata->div_int >> 4;
+ fb[1] = hwdata->div_int << 4;
+ fb[2] = hwdata->div_frc >> 16;
+ fb[3] = hwdata->div_frc >> 8;
+ fb[4] = hwdata->div_frc;
+
+ return regmap_bulk_write(vc5->regmap, VC5_FEEDBACK_INT_DIV, fb, 5);
+}
+
+static const struct clk_ops vc5_pll_ops = {
+ .recalc_rate = vc5_pll_recalc_rate,
+ .round_rate = vc5_pll_round_rate,
+ .set_rate = vc5_pll_set_rate,
+};
+
+static unsigned long vc5_fod_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct vc5_hw_data *hwdata = container_of(hw, struct vc5_hw_data, hw);
+ struct vc5_driver_data *vc5 = hwdata->vc5;
+ /* VCO frequency is divided by two before entering FOD */
+ u32 f_in = parent_rate / 2;
+ u32 div_int, div_frc;
+ u8 od_int[2];
+ u8 od_frc[4];
+
+ regmap_bulk_read(vc5->regmap, VC5_OUT_DIV_INT(hwdata->num, 0),
+ od_int, 2);
+ regmap_bulk_read(vc5->regmap, VC5_OUT_DIV_FRAC(hwdata->num, 0),
+ od_frc, 4);
+
+ div_int = (od_int[0] << 4) | (od_int[1] >> 4);
+ div_frc = (od_frc[0] << 22) | (od_frc[1] << 14) |
+ (od_frc[2] << 6) | (od_frc[3] >> 2);
+
+ /* The PLL divider has 12 integer bits and 30 fractional bits */
+ return div64_u64((u64)f_in << 24ULL, ((u64)div_int << 24ULL) + div_frc);
+}
+
+static long vc5_fod_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *parent_rate)
+{
+ struct vc5_hw_data *hwdata = container_of(hw, struct vc5_hw_data, hw);
+ /* VCO frequency is divided by two before entering FOD */
+ u32 f_in = *parent_rate / 2;
+ u32 div_int;
+ u64 div_frc;
+
+ /* Determine integer part, which is 12 bit wide */
+ div_int = f_in / rate;
+ /*
+ * WARNING: The clock chip does not output signal if the integer part
+ * of the divider is 0xfff and fractional part is non-zero.
+ * Clamp the divider at 0xffe to keep the code simple.
+ */
+ if (div_int > 0xffe) {
+ div_int = 0xffe;
+ rate = f_in / div_int;
+ }
+
+ /* Determine best fractional part, which is 30 bit wide */
+ div_frc = f_in % rate;
+ div_frc <<= 24;
+ do_div(div_frc, rate);
+
+ hwdata->div_int = div_int;
+ hwdata->div_frc = (u32)div_frc;
+
+ return div64_u64((u64)f_in << 24ULL, ((u64)div_int << 24ULL) + div_frc);
+}
+
+static int vc5_fod_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct vc5_hw_data *hwdata = container_of(hw, struct vc5_hw_data, hw);
+ struct vc5_driver_data *vc5 = hwdata->vc5;
+ u8 data[14] = {
+ hwdata->div_frc >> 22, hwdata->div_frc >> 14,
+ hwdata->div_frc >> 6, hwdata->div_frc << 2,
+ 0, 0, 0, 0, 0,
+ 0, 0,
+ hwdata->div_int >> 4, hwdata->div_int << 4,
+ 0
+ };
+
+ regmap_bulk_write(vc5->regmap, VC5_OUT_DIV_FRAC(hwdata->num, 0),
+ data, 14);
+
+ /*
+ * Toggle magic bit in undocumented register for unknown reason.
+ * This is what the IDT timing commander tool does and the chip
+ * datasheet somewhat implies this is needed, but the register
+ * and the bit is not documented.
+ */
+ regmap_update_bits(vc5->regmap, VC5_GLOBAL_REGISTER,
+ VC5_GLOBAL_REGISTER_GLOBAL_RESET, 0);
+ regmap_update_bits(vc5->regmap, VC5_GLOBAL_REGISTER,
+ VC5_GLOBAL_REGISTER_GLOBAL_RESET,
+ VC5_GLOBAL_REGISTER_GLOBAL_RESET);
+ return 0;
+}
+
+static const struct clk_ops vc5_fod_ops = {
+ .recalc_rate = vc5_fod_recalc_rate,
+ .round_rate = vc5_fod_round_rate,
+ .set_rate = vc5_fod_set_rate,
+};
+
+static int vc5_clk_out_prepare(struct clk_hw *hw)
+{
+ struct vc5_hw_data *hwdata = container_of(hw, struct vc5_hw_data, hw);
+ struct vc5_driver_data *vc5 = hwdata->vc5;
+
+ /* Enable the clock buffer */
+ regmap_update_bits(vc5->regmap, VC5_CLK_OUTPUT_CFG(hwdata->num, 1),
+ VC5_CLK_OUTPUT_CFG1_EN_CLKBUF,
+ VC5_CLK_OUTPUT_CFG1_EN_CLKBUF);
+ return 0;
+}
+
+static void vc5_clk_out_unprepare(struct clk_hw *hw)
+{
+ struct vc5_hw_data *hwdata = container_of(hw, struct vc5_hw_data, hw);
+ struct vc5_driver_data *vc5 = hwdata->vc5;
+
+ /* Enable the clock buffer */
+ regmap_update_bits(vc5->regmap, VC5_CLK_OUTPUT_CFG(hwdata->num, 1),
+ VC5_CLK_OUTPUT_CFG1_EN_CLKBUF, 0);
+}
+
+static unsigned char vc5_clk_out_get_parent(struct clk_hw *hw)
+{
+ struct vc5_hw_data *hwdata = container_of(hw, struct vc5_hw_data, hw);
+ struct vc5_driver_data *vc5 = hwdata->vc5;
+ const u8 mask = VC5_OUT_DIV_CONTROL_SELB_NORM |
+ VC5_OUT_DIV_CONTROL_SEL_EXT |
+ VC5_OUT_DIV_CONTROL_EN_FOD;
+ const u8 fodclkmask = VC5_OUT_DIV_CONTROL_SELB_NORM |
+ VC5_OUT_DIV_CONTROL_EN_FOD;
+ const u8 extclk = VC5_OUT_DIV_CONTROL_SELB_NORM |
+ VC5_OUT_DIV_CONTROL_SEL_EXT;
+ unsigned int src;
+
+ regmap_read(vc5->regmap, VC5_OUT_DIV_CONTROL(hwdata->num), &src);
+ src &= mask;
+
+ if ((src & fodclkmask) == VC5_OUT_DIV_CONTROL_EN_FOD)
+ return 0;
+
+ if (src == extclk)
+ return 1;
+
+ dev_warn(&vc5->client->dev,
+ "Invalid clock output configuration (%02x)\n", src);
+ return 0;
+}
+
+static int vc5_clk_out_set_parent(struct clk_hw *hw, u8 index)
+{
+ struct vc5_hw_data *hwdata = container_of(hw, struct vc5_hw_data, hw);
+ struct vc5_driver_data *vc5 = hwdata->vc5;
+ const u8 mask = VC5_OUT_DIV_CONTROL_RESET |
+ VC5_OUT_DIV_CONTROL_SELB_NORM |
+ VC5_OUT_DIV_CONTROL_SEL_EXT |
+ VC5_OUT_DIV_CONTROL_EN_FOD;
+ const u8 extclk = VC5_OUT_DIV_CONTROL_SELB_NORM |
+ VC5_OUT_DIV_CONTROL_SEL_EXT;
+ u8 src = VC5_OUT_DIV_CONTROL_RESET;
+
+ if (index == 0)
+ src |= VC5_OUT_DIV_CONTROL_EN_FOD;
+ else
+ src |= extclk;
+
+ return regmap_update_bits(vc5->regmap, VC5_OUT_DIV_CONTROL(hwdata->num),
+ mask, src);
+}
+
+static const struct clk_ops vc5_clk_out_ops = {
+ .prepare = vc5_clk_out_prepare,
+ .unprepare = vc5_clk_out_unprepare,
+ .set_parent = vc5_clk_out_set_parent,
+ .get_parent = vc5_clk_out_get_parent,
+};
+
+static struct clk_hw *vc5_of_clk_get(struct of_phandle_args *clkspec,
+ void *data)
+{
+ struct vc5_driver_data *vc5 = data;
+ unsigned int idx = clkspec->args[0];
+
+ if (idx > 2)
+ return ERR_PTR(-EINVAL);
+
+ return &vc5->clk_out[idx].hw;
+}
+
+static int vc5_map_index_to_output(const enum vc5_model model,
+ const unsigned int n)
+{
+ switch (model) {
+ case IDT_VC5_5P49V5933:
+ return (n == 0) ? 0 : 3;
+ case IDT_VC5_5P49V5923:
+ default:
+ return n;
+ }
+}
+
+static const struct of_device_id clk_vc5_of_match[];
+
+static int vc5_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ const struct of_device_id *of_id =
+ of_match_device(clk_vc5_of_match, &client->dev);
+ struct vc5_driver_data *vc5;
+ struct clk_init_data init;
+ const char *parent_names[2];
+ unsigned int n, idx;
+ int ret;
+
+ vc5 = devm_kzalloc(&client->dev, sizeof(*vc5), GFP_KERNEL);
+ if (vc5 == NULL)
+ return -ENOMEM;
+
+ i2c_set_clientdata(client, vc5);
+ vc5->client = client;
+ vc5->model = (enum vc5_model)of_id->data;
+
+ vc5->pin_xin = devm_clk_get(&client->dev, "xin");
+ if (PTR_ERR(vc5->pin_xin) == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+
+ vc5->pin_clkin = devm_clk_get(&client->dev, "clkin");
+ if (PTR_ERR(vc5->pin_clkin) == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+
+ vc5->regmap = devm_regmap_init_i2c(client, &vc5_regmap_config);
+ if (IS_ERR(vc5->regmap)) {
+ dev_err(&client->dev, "failed to allocate register map\n");
+ return PTR_ERR(vc5->regmap);
+ }
+
+ /* Register clock input mux */
+ memset(&init, 0, sizeof(init));
+
+ if (!IS_ERR(vc5->pin_xin)) {
+ vc5->clk_mux_ins |= VC5_MUX_IN_XIN;
+ parent_names[init.num_parents++] = __clk_get_name(vc5->pin_xin);
+ } else if (vc5->model == IDT_VC5_5P49V5933) {
+ /* IDT VC5 5P49V5933 has built-in oscilator. */
+ vc5->pin_xin = clk_register_fixed_rate(&client->dev,
+ "internal-xtal", NULL,
+ 0, 25000000);
+ if (IS_ERR(vc5->pin_xin))
+ return PTR_ERR(vc5->pin_xin);
+ vc5->clk_mux_ins |= VC5_MUX_IN_XIN;
+ parent_names[init.num_parents++] = __clk_get_name(vc5->pin_xin);
+ }
+
+ if (!IS_ERR(vc5->pin_clkin)) {
+ vc5->clk_mux_ins |= VC5_MUX_IN_CLKIN;
+ parent_names[init.num_parents++] =
+ __clk_get_name(vc5->pin_clkin);
+ }
+
+ if (!init.num_parents) {
+ dev_err(&client->dev, "no input clock specified!\n");
+ return -EINVAL;
+ }
+
+ init.name = vc5_mux_names[0];
+ init.ops = &vc5_mux_ops;
+ init.flags = 0;
+ init.parent_names = parent_names;
+ vc5->clk_mux.init = &init;
+ ret = devm_clk_hw_register(&client->dev, &vc5->clk_mux);
+ if (ret) {
+ dev_err(&client->dev, "unable to register %s\n", init.name);
+ goto err_clk;
+ }
+
+ /* Register PLL */
+ memset(&init, 0, sizeof(init));
+ init.name = vc5_pll_names[0];
+ init.ops = &vc5_pll_ops;
+ init.flags = CLK_SET_RATE_PARENT;
+ init.parent_names = vc5_mux_names;
+ init.num_parents = 1;
+ vc5->clk_pll.num = 0;
+ vc5->clk_pll.vc5 = vc5;
+ vc5->clk_pll.hw.init = &init;
+ ret = devm_clk_hw_register(&client->dev, &vc5->clk_pll.hw);
+ if (ret) {
+ dev_err(&client->dev, "unable to register %s\n", init.name);
+ goto err_clk;
+ }
+
+ /* Register FODs */
+ for (n = 0; n < 2; n++) {
+ idx = vc5_map_index_to_output(vc5->model, n);
+ memset(&init, 0, sizeof(init));
+ init.name = vc5_fod_names[idx];
+ init.ops = &vc5_fod_ops;
+ init.flags = CLK_SET_RATE_PARENT;
+ init.parent_names = vc5_pll_names;
+ init.num_parents = 1;
+ vc5->clk_fod[n].num = idx;
+ vc5->clk_fod[n].vc5 = vc5;
+ vc5->clk_fod[n].hw.init = &init;
+ ret = devm_clk_hw_register(&client->dev, &vc5->clk_fod[n].hw);
+ if (ret) {
+ dev_err(&client->dev, "unable to register %s\n",
+ init.name);
+ goto err_clk;
+ }
+ }
+
+ /* Register MUX-connected OUT0_I2C_SELB output */
+ memset(&init, 0, sizeof(init));
+ init.name = vc5_clk_out_names[0];
+ init.ops = &vc5_clk_out_ops;
+ init.flags = CLK_SET_RATE_PARENT;
+ init.parent_names = vc5_mux_names;
+ init.num_parents = 1;
+ vc5->clk_out[0].num = idx;
+ vc5->clk_out[0].vc5 = vc5;
+ vc5->clk_out[0].hw.init = &init;
+ ret = devm_clk_hw_register(&client->dev, &vc5->clk_out[0].hw);
+ if (ret) {
+ dev_err(&client->dev, "unable to register %s\n",
+ init.name);
+ goto err_clk;
+ }
+
+ /* Register FOD-connected OUTx outputs */
+ for (n = 1; n < 3; n++) {
+ idx = vc5_map_index_to_output(vc5->model, n - 1);
+ parent_names[0] = vc5_fod_names[idx];
+ if (n == 1)
+ parent_names[1] = vc5_mux_names[0];
+ else
+ parent_names[1] = vc5_clk_out_names[n - 1];
+
+ memset(&init, 0, sizeof(init));
+ init.name = vc5_clk_out_names[idx + 1];
+ init.ops = &vc5_clk_out_ops;
+ init.flags = CLK_SET_RATE_PARENT;
+ init.parent_names = parent_names;
+ init.num_parents = 2;
+ vc5->clk_out[n].num = idx;
+ vc5->clk_out[n].vc5 = vc5;
+ vc5->clk_out[n].hw.init = &init;
+ ret = devm_clk_hw_register(&client->dev,
+ &vc5->clk_out[n].hw);
+ if (ret) {
+ dev_err(&client->dev, "unable to register %s\n",
+ init.name);
+ goto err_clk;
+ }
+ }
+
+ ret = of_clk_add_hw_provider(client->dev.of_node, vc5_of_clk_get, vc5);
+ if (ret) {
+ dev_err(&client->dev, "unable to add clk provider\n");
+ goto err_clk;
+ }
+
+ return 0;
+
+err_clk:
+ if (vc5->model == IDT_VC5_5P49V5933)
+ clk_unregister_fixed_rate(vc5->pin_xin);
+ return ret;
+}
+
+static int vc5_remove(struct i2c_client *client)
+{
+ struct vc5_driver_data *vc5 = i2c_get_clientdata(client);
+
+ of_clk_del_provider(client->dev.of_node);
+
+ if (vc5->model == IDT_VC5_5P49V5933)
+ clk_unregister_fixed_rate(vc5->pin_xin);
+
+ return 0;
+}
+
+static const struct i2c_device_id vc5_id[] = {
+ { "5p49v5923", .driver_data = IDT_VC5_5P49V5923 },
+ { "5p49v5933", .driver_data = IDT_VC5_5P49V5933 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, vc5_id);
+
+static const struct of_device_id clk_vc5_of_match[] = {
+ { .compatible = "idt,5p49v5923", .data = (void *)IDT_VC5_5P49V5923 },
+ { .compatible = "idt,5p49v5933", .data = (void *)IDT_VC5_5P49V5933 },
+ { },
+};
+MODULE_DEVICE_TABLE(of, clk_vc5_of_match);
+
+static struct i2c_driver vc5_driver = {
+ .driver = {
+ .name = "vc5",
+ .of_match_table = clk_vc5_of_match,
+ },
+ .probe = vc5_probe,
+ .remove = vc5_remove,
+ .id_table = vc5_id,
+};
+module_i2c_driver(vc5_driver);
+
+MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>");
+MODULE_DESCRIPTION("IDT VersaClock 5 driver");
+MODULE_LICENSE("GPL");