diff options
| -rw-r--r-- | drivers/mfd/ab8500-core.c | 6 | ||||
| -rw-r--r-- | drivers/power/ab8500_charger.c | 432 |
2 files changed, 331 insertions, 107 deletions
diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c index 30b92652fce9..4c4aa197f307 100644 --- a/drivers/mfd/ab8500-core.c +++ b/drivers/mfd/ab8500-core.c @@ -749,6 +749,12 @@ static struct resource ab8500_charger_resources[] = { .end = AB8500_INT_CH_WD_EXP, .flags = IORESOURCE_IRQ, }, + { + .name = "VBUS_CH_DROP_END", + .start = AB8500_INT_VBUS_CH_DROP_END, + .end = AB8500_INT_VBUS_CH_DROP_END, + .flags = IORESOURCE_IRQ, + }, }; static struct resource ab8500_btemp_resources[] = { diff --git a/drivers/power/ab8500_charger.c b/drivers/power/ab8500_charger.c index 432f6bc48764..24b30b7ea5ca 100644 --- a/drivers/power/ab8500_charger.c +++ b/drivers/power/ab8500_charger.c @@ -55,6 +55,7 @@ #define MAIN_CH_INPUT_CURR_SHIFT 4 #define VBUS_IN_CURR_LIM_SHIFT 4 +#define AUTO_VBUS_IN_CURR_LIM_SHIFT 4 #define LED_INDICATOR_PWM_ENA 0x01 #define LED_INDICATOR_PWM_DIS 0x00 @@ -88,14 +89,13 @@ /* Step up/down delay in us */ #define STEP_UDELAY 1000 -/* Wait for enumeration before charging in ms */ -#define WAIT_FOR_USB_ENUMERATION 5 * 1000 - #define CHARGER_STATUS_POLL 10 /* in ms */ #define CHG_WD_INTERVAL (60 * HZ) #define AB8500_SW_CONTROL_FALLBACK 0x03 +/* Wait for enumeration before charing in us */ +#define WAIT_ACA_RID_ENUMERATION (5 * 1000) /* UsbLineStatus register - usb types */ enum ab8500_charger_link_status { @@ -185,12 +185,14 @@ struct ab8500_charger_event_flags { bool usbchargernotok; bool chgwdexp; bool vbus_collapse; + bool vbus_drop_end; }; struct ab8500_charger_usb_state { - bool usb_changed; int usb_current; + int usb_current_tmp; enum ab8500_usb_state state; + enum ab8500_usb_state state_tmp; spinlock_t usb_lock; }; @@ -212,6 +214,10 @@ struct ab8500_charger_usb_state { * @autopower Indicate if we should have automatic pwron after pwrloss * @autopower_cfg platform specific power config support for "pwron after pwrloss" * @invalid_charger_detect_state State when forcing AB to use invalid charger + * @is_usb_host: Indicate if last detected USB type is host + * @is_aca_rid: Incicate if accessory is ACA type + * @current_stepping_sessions: + * Counter for current stepping sessions * @parent: Pointer to the struct ab8500 * @gpadc: Pointer to the struct gpadc * @bm: Platform specific battery management information @@ -223,12 +229,13 @@ struct ab8500_charger_usb_state { * @usb: Structure that holds the USB charger properties * @regu: Pointer to the struct regulator * @charger_wq: Work queue for the IRQs and checking HW state + * @usb_ipt_crnt_lock: Lock to protect VBUS input current setting from mutuals + * @pm_lock: Lock to prevent system to suspend * @check_vbat_work Work for checking vbat threshold to adjust vbus current * @check_hw_failure_work: Work for checking HW state * @check_usbchgnotok_work: Work for checking USB charger not ok status * @kick_wd_work: Work for kicking the charger watchdog in case * of ABB rev 1.* due to the watchog logic bug - * @attach_work: Work for checking the usb enumeration * @ac_charger_attached_work: Work for checking if AC charger is still * connected * @usb_charger_attached_work: Work for checking if USB charger is still @@ -237,6 +244,8 @@ struct ab8500_charger_usb_state { * @detect_usb_type_work: Work for detecting the USB type connected * @usb_link_status_work: Work for checking the new USB link status * @usb_state_changed_work: Work for checking USB state + * @attach_work: Work for detecting USB type + * @vbus_drop_end_work: Work for detecting VBUS drop end * @check_main_thermal_prot_work: * Work for checking Main thermal status * @check_usb_thermal_prot_work: @@ -257,6 +266,9 @@ struct ab8500_charger { bool autopower; bool autopower_cfg; int invalid_charger_detect_state; + bool is_usb_host; + int is_aca_rid; + atomic_t current_stepping_sessions; struct ab8500 *parent; struct ab8500_gpadc *gpadc; struct abx500_bm_data *bm; @@ -268,17 +280,19 @@ struct ab8500_charger { struct ab8500_charger_info usb; struct regulator *regu; struct workqueue_struct *charger_wq; + struct mutex usb_ipt_crnt_lock; struct delayed_work check_vbat_work; struct delayed_work check_hw_failure_work; struct delayed_work check_usbchgnotok_work; struct delayed_work kick_wd_work; + struct delayed_work usb_state_changed_work; struct delayed_work attach_work; struct delayed_work ac_charger_attached_work; struct delayed_work usb_charger_attached_work; + struct delayed_work vbus_drop_end_work; struct work_struct ac_work; struct work_struct detect_usb_type_work; struct work_struct usb_link_status_work; - struct work_struct usb_state_changed_work; struct work_struct check_main_thermal_prot_work; struct work_struct check_usb_thermal_prot_work; struct usb_phy *usb_phy; @@ -568,6 +582,7 @@ static int ab8500_charger_usb_cv(struct ab8500_charger *di) /** * ab8500_charger_detect_chargers() - Detect the connected chargers * @di: pointer to the ab8500_charger structure + * @probe: if probe, don't delay and wait for HW * * Returns the type of charger connected. * For USB it will not mean we can actually charge from it @@ -581,7 +596,7 @@ static int ab8500_charger_usb_cv(struct ab8500_charger *di) * USB_PW_CONN if the USB power supply is connected * AC_PW_CONN + USB_PW_CONN if USB and AC power supplies are both connected */ -static int ab8500_charger_detect_chargers(struct ab8500_charger *di) +static int ab8500_charger_detect_chargers(struct ab8500_charger *di, bool probe) { int result = NO_PW_CONN; int ret; @@ -599,13 +614,25 @@ static int ab8500_charger_detect_chargers(struct ab8500_charger *di) result = AC_PW_CONN; /* Check for USB charger */ + + if (!probe) { + /* + * AB8500 says VBUS_DET_DBNC1 & VBUS_DET_DBNC100 + * when disconnecting ACA even though no + * charger was connected. Try waiting a little + * longer than the 100 ms of VBUS_DET_DBNC100... + */ + msleep(110); + } ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER, AB8500_CH_USBCH_STAT1_REG, &val); if (ret < 0) { dev_err(di->dev, "%s ab8500 read failed\n", __func__); return ret; } - + dev_dbg(di->dev, + "%s AB8500_CH_USBCH_STAT1_REG %x\n", __func__, + val); if ((val & VBUS_DET_DBNC1) && (val & VBUS_DET_DBNC100)) result |= USB_PW_CONN; @@ -628,33 +655,47 @@ static int ab8500_charger_max_usb_curr(struct ab8500_charger *di, di->usb_device_is_unrecognised = false; + /* + * Platform only supports USB 2.0. + * This means that charging current from USB source + * is maximum 500 mA. Every occurence of USB_STAT_*_HOST_* + * should set USB_CH_IP_CUR_LVL_0P5. + */ + switch (link_status) { case USB_STAT_STD_HOST_NC: case USB_STAT_STD_HOST_C_NS: case USB_STAT_STD_HOST_C_S: dev_dbg(di->dev, "USB Type - Standard host is " - "detected through USB driver\n"); - di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P09; + "detected through USB driver\n"); + di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P5; + di->is_usb_host = true; + di->is_aca_rid = 0; break; case USB_STAT_HOST_CHG_HS_CHIRP: di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P5; - dev_dbg(di->dev, "USB Type - 0x%02x MaxCurr: %d", link_status, - di->max_usb_in_curr); + di->is_usb_host = true; + di->is_aca_rid = 0; break; case USB_STAT_HOST_CHG_HS: + di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P5; + di->is_usb_host = true; + di->is_aca_rid = 0; + break; case USB_STAT_ACA_RID_C_HS: di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P9; - dev_dbg(di->dev, "USB Type - 0x%02x MaxCurr: %d", link_status, - di->max_usb_in_curr); + di->is_usb_host = false; + di->is_aca_rid = 0; break; case USB_STAT_ACA_RID_A: /* * Dedicated charger level minus maximum current accessory - * can consume (300mA). Closest level is 1100mA + * can consume (900mA). Closest level is 500mA */ - di->max_usb_in_curr = USB_CH_IP_CUR_LVL_1P1; - dev_dbg(di->dev, "USB Type - 0x%02x MaxCurr: %d", link_status, - di->max_usb_in_curr); + dev_dbg(di->dev, "USB_STAT_ACA_RID_A detected\n"); + di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P5; + di->is_usb_host = false; + di->is_aca_rid = 1; break; case USB_STAT_ACA_RID_B: /* @@ -664,14 +705,24 @@ static int ab8500_charger_max_usb_curr(struct ab8500_charger *di, di->max_usb_in_curr = USB_CH_IP_CUR_LVL_1P3; dev_dbg(di->dev, "USB Type - 0x%02x MaxCurr: %d", link_status, di->max_usb_in_curr); + di->is_usb_host = false; + di->is_aca_rid = 1; break; case USB_STAT_HOST_CHG_NM: + di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P5; + di->is_usb_host = true; + di->is_aca_rid = 0; + break; case USB_STAT_DEDICATED_CHG: - case USB_STAT_ACA_RID_C_NM: + di->max_usb_in_curr = USB_CH_IP_CUR_LVL_1P5; + di->is_usb_host = false; + di->is_aca_rid = 0; + break; case USB_STAT_ACA_RID_C_HS_CHIRP: + case USB_STAT_ACA_RID_C_NM: di->max_usb_in_curr = USB_CH_IP_CUR_LVL_1P5; - dev_dbg(di->dev, "USB Type - 0x%02x MaxCurr: %d", link_status, - di->max_usb_in_curr); + di->is_usb_host = false; + di->is_aca_rid = 1; break; case USB_STAT_NOT_CONFIGURED: if (di->vbus_detected) { @@ -788,6 +839,8 @@ static int ab8500_charger_detect_usb_type(struct ab8500_charger *di) ret = abx500_get_register_interruptible(di->dev, AB8500_INTERRUPT, AB8500_IT_SOURCE21_REG, &val); + dev_dbg(di->dev, "%s AB8500_IT_SOURCE21_REG %x\n", + __func__, val); if (ret < 0) { dev_err(di->dev, "%s ab8500 read failed\n", __func__); return ret; @@ -803,6 +856,8 @@ static int ab8500_charger_detect_usb_type(struct ab8500_charger *di) dev_err(di->dev, "%s ab8500 read failed\n", __func__); return ret; } + dev_dbg(di->dev, "%s AB8500_USB_LINE_STAT_REG %x\n", __func__, + val); /* * Until the IT source register is read the UsbLineStatus * register is not updated, hence doing the same @@ -1062,69 +1117,125 @@ static int ab8500_charger_get_usb_cur(struct ab8500_charger *di) static int ab8500_charger_set_current(struct ab8500_charger *di, int ich, int reg) { - int ret, i; - int curr_index, prev_curr_index, shift_value; + int ret = 0; + int auto_curr_index, curr_index, prev_curr_index, shift_value, i; u8 reg_value; + u32 step_udelay; + bool no_stepping = false; + + atomic_inc(&di->current_stepping_sessions); + + ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER, + reg, ®_value); + if (ret < 0) { + dev_err(di->dev, "%s read failed\n", __func__); + goto exit_set_current; + } switch (reg) { case AB8500_MCH_IPT_CURLVL_REG: shift_value = MAIN_CH_INPUT_CURR_SHIFT; + prev_curr_index = (reg_value >> shift_value); curr_index = ab8500_current_to_regval(ich); + step_udelay = STEP_UDELAY; + if (!di->ac.charger_connected) + no_stepping = true; break; case AB8500_USBCH_IPT_CRNTLVL_REG: shift_value = VBUS_IN_CURR_LIM_SHIFT; + prev_curr_index = (reg_value >> shift_value); curr_index = ab8500_vbus_in_curr_to_regval(ich); + step_udelay = STEP_UDELAY * 100; + + ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER, + AB8500_CH_USBCH_STAT2_REG, ®_value); + if (ret < 0) { + dev_err(di->dev, "%s read failed\n", __func__); + goto exit_set_current; + } + auto_curr_index = + reg_value >> AUTO_VBUS_IN_CURR_LIM_SHIFT; + + dev_dbg(di->dev, "%s Auto VBUS curr is %d mA\n", + __func__, + ab8500_charger_vbus_in_curr_map[auto_curr_index]); + + prev_curr_index = min(prev_curr_index, auto_curr_index); + + if (!di->usb.charger_connected) + no_stepping = true; break; case AB8500_CH_OPT_CRNTLVL_REG: shift_value = 0; + prev_curr_index = (reg_value >> shift_value); curr_index = ab8500_current_to_regval(ich); + step_udelay = STEP_UDELAY; + if (curr_index && (curr_index - prev_curr_index) > 1) + step_udelay *= 100; + + if (!di->usb.charger_connected && !di->ac.charger_connected) + no_stepping = true; + break; default: dev_err(di->dev, "%s current register not valid\n", __func__); - return -ENXIO; + ret = -ENXIO; + goto exit_set_current; } if (curr_index < 0) { dev_err(di->dev, "requested current limit out-of-range\n"); - return -ENXIO; - } - - ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER, - reg, ®_value); - if (ret < 0) { - dev_err(di->dev, "%s read failed\n", __func__); - return ret; + ret = -ENXIO; + goto exit_set_current; } - prev_curr_index = (reg_value >> shift_value); /* only update current if it's been changed */ - if (prev_curr_index == curr_index) - return 0; + if (prev_curr_index == curr_index) { + dev_dbg(di->dev, "%s current not changed for reg: 0x%02x\n", + __func__, reg); + ret = 0; + goto exit_set_current; + } dev_dbg(di->dev, "%s set charger current: %d mA for reg: 0x%02x\n", __func__, ich, reg); - if (prev_curr_index > curr_index) { + if (no_stepping) { + ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, + reg, (u8)curr_index << shift_value); + if (ret) + dev_err(di->dev, "%s write failed\n", __func__); + } else if (prev_curr_index > curr_index) { for (i = prev_curr_index - 1; i >= curr_index; i--) { + dev_dbg(di->dev, "curr change_1 to: %x for 0x%02x\n", + (u8) i << shift_value, reg); ret = abx500_set_register_interruptible(di->dev, - AB8500_CHARGER, reg, (u8) i << shift_value); + AB8500_CHARGER, reg, (u8)i << shift_value); if (ret) { dev_err(di->dev, "%s write failed\n", __func__); - return ret; + goto exit_set_current; } - usleep_range(STEP_UDELAY, STEP_UDELAY * 2); + if (i != curr_index) + usleep_range(step_udelay, step_udelay * 2); } } else { for (i = prev_curr_index + 1; i <= curr_index; i++) { + dev_dbg(di->dev, "curr change_2 to: %x for 0x%02x\n", + (u8)i << shift_value, reg); ret = abx500_set_register_interruptible(di->dev, - AB8500_CHARGER, reg, (u8) i << shift_value); + AB8500_CHARGER, reg, (u8)i << shift_value); if (ret) { dev_err(di->dev, "%s write failed\n", __func__); - return ret; + goto exit_set_current; } - usleep_range(STEP_UDELAY, STEP_UDELAY * 2); + if (i != curr_index) + usleep_range(step_udelay, step_udelay * 2); } } + +exit_set_current: + atomic_dec(&di->current_stepping_sessions); + return ret; } @@ -1140,6 +1251,7 @@ static int ab8500_charger_set_vbus_in_curr(struct ab8500_charger *di, int ich_in) { int min_value; + int ret; /* We should always use to lowest current limit */ min_value = min(di->bm->chg_params->usb_curr_max, ich_in); @@ -1157,8 +1269,14 @@ static int ab8500_charger_set_vbus_in_curr(struct ab8500_charger *di, break; } - return ab8500_charger_set_current(di, min_value, + dev_info(di->dev, "VBUS input current limit set to %d mA\n", min_value); + + mutex_lock(&di->usb_ipt_crnt_lock); + ret = ab8500_charger_set_current(di, min_value, AB8500_USBCH_IPT_CRNTLVL_REG); + mutex_unlock(&di->usb_ipt_crnt_lock); + + return ret; } /** @@ -1469,25 +1587,13 @@ static int ab8500_charger_usb_en(struct ux500_charger *charger, dev_err(di->dev, "%s write failed\n", __func__); return ret; } - /* USBChInputCurr: current that can be drawn from the usb */ - ret = ab8500_charger_set_vbus_in_curr(di, di->max_usb_in_curr); - if (ret) { - dev_err(di->dev, "setting USBChInputCurr failed\n"); - return ret; - } - /* ChOutputCurentLevel: protected output current */ - ret = ab8500_charger_set_output_curr(di, ich_out); - if (ret) { - dev_err(di->dev, "%s " - "Failed to set ChOutputCurentLevel\n", - __func__); - return ret; - } /* Check if VBAT overshoot control should be enabled */ if (!di->bm->enable_overshoot) overshoot = USB_CHG_NO_OVERSHOOT_ENA_N; /* Enable USB Charger */ + dev_dbg(di->dev, + "Enabling USB with write to AB8500_USBCH_CTRL1_REG\n"); ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, AB8500_USBCH_CTRL1_REG, USB_CH_ENA | overshoot); if (ret) { @@ -1500,11 +1606,29 @@ static int ab8500_charger_usb_en(struct ux500_charger *charger, if (ret < 0) dev_err(di->dev, "failed to enable LED\n"); + di->usb.charger_online = 1; + + /* USBChInputCurr: current that can be drawn from the usb */ + ret = ab8500_charger_set_vbus_in_curr(di, di->max_usb_in_curr); + if (ret) { + dev_err(di->dev, "setting USBChInputCurr failed\n"); + return ret; + } + + /* ChOutputCurentLevel: protected output current */ + ret = ab8500_charger_set_output_curr(di, ich_out); + if (ret) { + dev_err(di->dev, "%s " + "Failed to set ChOutputCurentLevel\n", + __func__); + return ret; + } + queue_delayed_work(di->charger_wq, &di->check_vbat_work, HZ); - di->usb.charger_online = 1; } else { /* Disable USB charging */ + dev_dbg(di->dev, "%s Disabled USB charging\n", __func__); ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, AB8500_USBCH_CTRL1_REG, 0); @@ -1517,7 +1641,21 @@ static int ab8500_charger_usb_en(struct ux500_charger *charger, ret = ab8500_charger_led_en(di, false); if (ret < 0) dev_err(di->dev, "failed to disable LED\n"); + /* USBChInputCurr: current that can be drawn from the usb */ + ret = ab8500_charger_set_vbus_in_curr(di, 0); + if (ret) { + dev_err(di->dev, "setting USBChInputCurr failed\n"); + return ret; + } + /* ChOutputCurentLevel: protected output current */ + ret = ab8500_charger_set_output_curr(di, 0); + if (ret) { + dev_err(di->dev, "%s " + "Failed to reset ChOutputCurentLevel\n", + __func__); + return ret; + } di->usb.charger_online = 0; di->usb.wd_expired = false; @@ -1800,7 +1938,7 @@ static void ab8500_charger_ac_work(struct work_struct *work) * synchronously, we have the check if the main charger is * connected by reading the status register */ - ret = ab8500_charger_detect_chargers(di); + ret = ab8500_charger_detect_chargers(di, false); if (ret < 0) return; @@ -1911,16 +2049,18 @@ static void ab8500_charger_detect_usb_type_work(struct work_struct *work) * synchronously, we have the check if is * connected by reading the status register */ - ret = ab8500_charger_detect_chargers(di); + ret = ab8500_charger_detect_chargers(di, false); if (ret < 0) return; if (!(ret & USB_PW_CONN)) { - di->vbus_detected = 0; + dev_dbg(di->dev, "%s di->vbus_detected = false\n", __func__); + di->vbus_detected = false; ab8500_charger_set_usb_connected(di, false); ab8500_power_supply_changed(di, &di->usb_chg.psy); } else { - di->vbus_detected = 1; + dev_dbg(di->dev, "%s di->vbus_detected = true\n", __func__); + di->vbus_detected = true; if (is_ab8500_1p1_or_earlier(di->parent)) { ret = ab8500_charger_detect_usb_type(di); @@ -1930,7 +2070,8 @@ static void ab8500_charger_detect_usb_type_work(struct work_struct *work) &di->usb_chg.psy); } } else { - /* For ABB cut2.0 and onwards we have an IRQ, + /* + * For ABB cut2.0 and onwards we have an IRQ, * USB_LINK_STATUS that will be triggered when the USB * link status changes. The exception is USB connected * during startup. Then we don't get a @@ -1951,7 +2092,7 @@ static void ab8500_charger_detect_usb_type_work(struct work_struct *work) } /** - * ab8500_charger_usb_link_attach_work() - delayd work to detect USB type + * ab8500_charger_usb_link_attach_work() - work to detect USB type * @work: pointer to the work_struct structure * * Detect the type of USB plugged @@ -1993,7 +2134,7 @@ static void ab8500_charger_usb_link_status_work(struct work_struct *work) * synchronously, we have the check if is * connected by reading the status register */ - detected_chargers = ab8500_charger_detect_chargers(di); + detected_chargers = ab8500_charger_detect_chargers(di, false); if (detected_chargers < 0) return; @@ -2042,32 +2183,46 @@ static void ab8500_charger_usb_link_status_work(struct work_struct *work) } if (!(detected_chargers & USB_PW_CONN)) { - di->vbus_detected = 0; + di->vbus_detected = false; ab8500_charger_set_usb_connected(di, false); ab8500_power_supply_changed(di, &di->usb_chg.psy); return; } - di->vbus_detected = 1; + dev_dbg(di->dev,"%s di->vbus_detected = true\n",__func__); + di->vbus_detected = true; ret = ab8500_charger_read_usb_type(di); - if (!ret) { - if (di->usb_device_is_unrecognised) { - dev_dbg(di->dev, - "Potential Legacy Charger device. " - "Delay work for %d msec for USB enum " - "to finish", - WAIT_FOR_USB_ENUMERATION); - queue_delayed_work(di->charger_wq, - &di->attach_work, - msecs_to_jiffies(WAIT_FOR_USB_ENUMERATION)); - } else { - queue_delayed_work(di->charger_wq, - &di->attach_work, 0); + if (ret) { + if (ret == -ENXIO) { + /* No valid charger type detected */ + ab8500_charger_set_usb_connected(di, false); + ab8500_power_supply_changed(di, &di->usb_chg.psy); } - } else if (ret == -ENXIO) { - /* No valid charger type detected */ - ab8500_charger_set_usb_connected(di, false); - ab8500_power_supply_changed(di, &di->usb_chg.psy); + return; + } + + if (di->usb_device_is_unrecognised) { + dev_dbg(di->dev, + "Potential Legacy Charger device. " + "Delay work for %d msec for USB enum " + "to finish", + WAIT_ACA_RID_ENUMERATION); + queue_delayed_work(di->charger_wq, + &di->attach_work, + msecs_to_jiffies(WAIT_ACA_RID_ENUMERATION)); + } else if (di->is_aca_rid == 1) { + /* Only wait once */ + di->is_aca_rid++; + dev_dbg(di->dev, + "%s Wait %d msec for USB enum to finish", + __func__, WAIT_ACA_RID_ENUMERATION); + queue_delayed_work(di->charger_wq, + &di->attach_work, + msecs_to_jiffies(WAIT_ACA_RID_ENUMERATION)); + } else { + queue_delayed_work(di->charger_wq, + &di->attach_work, + 0); } } @@ -2077,24 +2232,20 @@ static void ab8500_charger_usb_state_changed_work(struct work_struct *work) unsigned long flags; struct ab8500_charger *di = container_of(work, - struct ab8500_charger, usb_state_changed_work); + struct ab8500_charger, usb_state_changed_work.work); - if (!di->vbus_detected) + if (!di->vbus_detected) { + dev_dbg(di->dev, + "%s !di->vbus_detected\n", + __func__); return; + } spin_lock_irqsave(&di->usb_state.usb_lock, flags); - di->usb_state.usb_changed = false; + di->usb_state.state = di->usb_state.state_tmp; + di->usb_state.usb_current = di->usb_state.usb_current_tmp; spin_unlock_irqrestore(&di->usb_state.usb_lock, flags); - /* - * wait for some time until you get updates from the usb stack - * and negotiations are completed - */ - msleep(250); - - if (di->usb_state.usb_changed) - return; - dev_dbg(di->dev, "%s USB state: 0x%02x mA: %d\n", __func__, di->usb_state.state, di->usb_state.usb_current); @@ -2336,6 +2487,21 @@ static irqreturn_t ab8500_charger_mainchthprotf_handler(int irq, void *_di) return IRQ_HANDLED; } +static void ab8500_charger_vbus_drop_end_work(struct work_struct *work) +{ + struct ab8500_charger *di = container_of(work, + struct ab8500_charger, vbus_drop_end_work.work); + + di->flags.vbus_drop_end = false; + + /* Reset the drop counter */ + abx500_set_register_interruptible(di->dev, + AB8500_CHARGER, AB8500_CHARGER_CTRL, 0x01); + + if (di->usb.charger_connected) + ab8500_charger_set_vbus_in_curr(di, di->max_usb_in_curr); +} + /** * ab8500_charger_vbusdetf_handler() - VBUS falling detected * @irq: interrupt number @@ -2347,6 +2513,7 @@ static irqreturn_t ab8500_charger_vbusdetf_handler(int irq, void *_di) { struct ab8500_charger *di = _di; + di->vbus_detected = false; dev_dbg(di->dev, "VBUS falling detected\n"); queue_work(di->charger_wq, &di->detect_usb_type_work); @@ -2366,6 +2533,7 @@ static irqreturn_t ab8500_charger_vbusdetr_handler(int irq, void *_di) di->vbus_detected = true; dev_dbg(di->dev, "VBUS rising detected\n"); + queue_work(di->charger_wq, &di->detect_usb_type_work); return IRQ_HANDLED; @@ -2474,6 +2642,25 @@ static irqreturn_t ab8500_charger_chwdexp_handler(int irq, void *_di) } /** + * ab8500_charger_vbuschdropend_handler() - VBUS drop removed + * @irq: interrupt number + * @_di: pointer to the ab8500_charger structure + * + * Returns IRQ status(IRQ_HANDLED) + */ +static irqreturn_t ab8500_charger_vbuschdropend_handler(int irq, void *_di) +{ + struct ab8500_charger *di = _di; + + dev_dbg(di->dev, "VBUS charger drop ended\n"); + di->flags.vbus_drop_end = true; + queue_delayed_work(di->charger_wq, &di->vbus_drop_end_work, + round_jiffies(30 * HZ)); + + return IRQ_HANDLED; +} + +/** * ab8500_charger_vbusovv_handler() - VBUS overvoltage detected * @irq: interrupt number * @_di: pointer to the ab8500_charger structure @@ -2743,6 +2930,20 @@ static int ab8500_charger_init_hw_registers(struct ab8500_charger *di) goto out; } + /* Set charger watchdog timeout */ + ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, + AB8500_CH_WD_TIMER_REG, WD_TIMER); + if (ret) { + dev_err(di->dev, "failed to set charger watchdog timeout\n"); + goto out; + } + + ret = ab8500_charger_led_en(di, false); + if (ret < 0) { + dev_err(di->dev, "failed to disable LED\n"); + goto out; + } + /* Backup battery voltage and current */ ret = abx500_set_register_interruptible(di->dev, AB8500_RTC, @@ -2782,6 +2983,7 @@ static struct ab8500_charger_interrupts ab8500_charger_irq[] = { {"USB_CHARGER_NOT_OKR", ab8500_charger_usbchargernotokr_handler}, {"VBUS_OVV", ab8500_charger_vbusovv_handler}, {"CH_WD_EXP", ab8500_charger_chwdexp_handler}, + {"VBUS_CH_DROP_END", ab8500_charger_vbuschdropend_handler}, }; static int ab8500_charger_usb_notifier_call(struct notifier_block *nb, @@ -2818,13 +3020,15 @@ static int ab8500_charger_usb_notifier_call(struct notifier_block *nb, __func__, bm_usb_state, mA); spin_lock(&di->usb_state.usb_lock); - di->usb_state.usb_changed = true; + di->usb_state.state_tmp = bm_usb_state; + di->usb_state.usb_current_tmp = mA; spin_unlock(&di->usb_state.usb_lock); - di->usb_state.state = bm_usb_state; - di->usb_state.usb_current = mA; - - queue_work(di->charger_wq, &di->usb_state_changed_work); + /* + * wait for some time until you get updates from the usb stack + * and negotiations are completed + */ + queue_delayed_work(di->charger_wq, &di->usb_state_changed_work, HZ/2); return NOTIFY_OK; } @@ -2864,6 +3068,9 @@ static int ab8500_charger_resume(struct platform_device *pdev) &di->check_hw_failure_work, 0); } + if (di->flags.vbus_drop_end) + queue_delayed_work(di->charger_wq, &di->vbus_drop_end_work, 0); + return 0; } @@ -2876,6 +3083,9 @@ static int ab8500_charger_suspend(struct platform_device *pdev, if (delayed_work_pending(&di->check_hw_failure_work)) cancel_delayed_work(&di->check_hw_failure_work); + if (delayed_work_pending(&di->vbus_drop_end_work)) + cancel_delayed_work(&di->vbus_drop_end_work); + flush_delayed_work(&di->attach_work); flush_delayed_work(&di->usb_charger_attached_work); flush_delayed_work(&di->ac_charger_attached_work); @@ -2887,6 +3097,9 @@ static int ab8500_charger_suspend(struct platform_device *pdev, flush_work(&di->ac_work); flush_work(&di->detect_usb_type_work); + if (atomic_read(&di->current_stepping_sessions)) + return -EAGAIN; + return 0; } #else @@ -2926,9 +3139,10 @@ static int ab8500_charger_remove(struct platform_device *pdev) flush_scheduled_work(); if(di->usb_chg.enabled) power_supply_unregister(&di->usb_chg.psy); +#if !defined(CONFIG_CHARGER_PM2301) if(di->ac_chg.enabled) power_supply_unregister(&di->ac_chg.psy); - +#endif platform_set_drvdata(pdev, NULL); return 0; @@ -2976,6 +3190,7 @@ static int ab8500_charger_probe(struct platform_device *pdev) /* initialize lock */ spin_lock_init(&di->usb_state.usb_lock); + mutex_init(&di->usb_ipt_crnt_lock); di->autopower = false; di->invalid_charger_detect_state = 0; @@ -3061,6 +3276,12 @@ static int ab8500_charger_probe(struct platform_device *pdev) INIT_DELAYED_WORK(&di->attach_work, ab8500_charger_usb_link_attach_work); + INIT_DELAYED_WORK(&di->usb_state_changed_work, + ab8500_charger_usb_state_changed_work); + + INIT_DELAYED_WORK(&di->vbus_drop_end_work, + ab8500_charger_vbus_drop_end_work); + /* Init work for charger detection */ INIT_WORK(&di->usb_link_status_work, ab8500_charger_usb_link_status_work); @@ -3068,9 +3289,6 @@ static int ab8500_charger_probe(struct platform_device *pdev) INIT_WORK(&di->detect_usb_type_work, ab8500_charger_detect_usb_type_work); - INIT_WORK(&di->usb_state_changed_work, - ab8500_charger_usb_state_changed_work); - /* Init work for checking HW status */ INIT_WORK(&di->check_main_thermal_prot_work, ab8500_charger_check_main_thermal_prot_work); @@ -3129,7 +3347,7 @@ static int ab8500_charger_probe(struct platform_device *pdev) } /* Identify the connected charger types during startup */ - charger_status = ab8500_charger_detect_chargers(di); + charger_status = ab8500_charger_detect_chargers(di, true); if (charger_status & AC_PW_CONN) { di->ac.charger_connected = 1; di->ac_conn = true; @@ -3164,7 +3382,7 @@ static int ab8500_charger_probe(struct platform_device *pdev) mutex_lock(&di->charger_attached_mutex); - ch_stat = ab8500_charger_detect_chargers(di); + ch_stat = ab8500_charger_detect_chargers(di, false); if ((ch_stat & AC_PW_CONN) == AC_PW_CONN) { queue_delayed_work(di->charger_wq, |