diff options
| -rw-r--r-- | drivers/mtd/nand/raw/ingenic/ingenic_nand_drv.c | 14 |
1 files changed, 13 insertions, 1 deletions
diff --git a/drivers/mtd/nand/raw/ingenic/ingenic_nand_drv.c b/drivers/mtd/nand/raw/ingenic/ingenic_nand_drv.c index 2af1b54d5d9d..221f480776e5 100644 --- a/drivers/mtd/nand/raw/ingenic/ingenic_nand_drv.c +++ b/drivers/mtd/nand/raw/ingenic/ingenic_nand_drv.c @@ -184,7 +184,7 @@ static int ingenic_nand_dev_ready(struct nand_chip *chip) { struct ingenic_nand *nand = to_ingenic_nand(nand_to_mtd(chip)); - return !gpiod_get_value_cansleep(nand->busy_gpio); + return gpiod_get_value_cansleep(nand->busy_gpio); } static void ingenic_nand_ecc_hwctl(struct nand_chip *chip, int mode) @@ -343,6 +343,18 @@ static int ingenic_nand_init_chip(struct platform_device *pdev, nand->chip.legacy.dev_ready = ingenic_nand_dev_ready; } + /* + * The rb-gpios semantics was undocumented and qi,lb60 (along with + * the ingenic driver) got it wrong. The active state encodes the + * NAND ready state, which is high level. Since there's no signal + * inverter on this board, it should be active-high. Let's fix that + * here for older DTs so we can re-use the generic nand_gpio_waitrdy() + * helper, and be consistent with what other drivers do. + */ + if (of_machine_is_compatible("qi,lb60") && + gpiod_is_active_low(nand->busy_gpio)) + gpiod_toggle_active_low(nand->busy_gpio); + nand->wp_gpio = devm_gpiod_get_optional(dev, "wp", GPIOD_OUT_LOW); if (IS_ERR(nand->wp_gpio)) { |