summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/common.h4
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/dwmac1000.h7
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c7
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/dwmac100_core.c2
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/stmmac_main.c11
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c13
-rw-r--r--include/linux/stmmac.h1
7 files changed, 33 insertions, 12 deletions
diff --git a/drivers/net/ethernet/stmicro/stmmac/common.h b/drivers/net/ethernet/stmicro/stmmac/common.h
index 5a60b3fb00b6..7834a3993946 100644
--- a/drivers/net/ethernet/stmicro/stmmac/common.h
+++ b/drivers/net/ethernet/stmicro/stmmac/common.h
@@ -292,6 +292,8 @@ struct dma_features {
#define STMMAC_CHAIN_MODE 0x1
#define STMMAC_RING_MODE 0x2
+#define JUMBO_LEN 9000
+
struct stmmac_desc_ops {
/* DMA RX descriptor ring initialization */
void (*init_rx_desc) (struct dma_desc *p, int disable_rx_ic, int mode,
@@ -368,7 +370,7 @@ struct stmmac_dma_ops {
struct stmmac_ops {
/* MAC core initialization */
- void (*core_init) (void __iomem *ioaddr);
+ void (*core_init) (void __iomem *ioaddr, int mtu);
/* Enable and verify that the IPC module is supported */
int (*rx_ipc) (void __iomem *ioaddr);
/* Dump MAC registers */
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac1000.h b/drivers/net/ethernet/stmicro/stmmac/dwmac1000.h
index c12aabb8cf93..f37d90f114f5 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac1000.h
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000.h
@@ -126,11 +126,8 @@ enum power_event {
#define GMAC_ANE_PSE (3 << 7)
#define GMAC_ANE_PSE_SHIFT 7
- /* GMAC Configuration defines */
-#define GMAC_CONTROL_TC 0x01000000 /* Transmit Conf. in RGMII/SGMII */
-#define GMAC_CONTROL_WD 0x00800000 /* Disable Watchdog on receive */
-
/* GMAC Configuration defines */
+#define GMAC_CONTROL_2K 0x08000000 /* IEEE 802.3as 2K packets */
#define GMAC_CONTROL_TC 0x01000000 /* Transmit Conf. in RGMII/SGMII */
#define GMAC_CONTROL_WD 0x00800000 /* Disable Watchdog on receive */
#define GMAC_CONTROL_JD 0x00400000 /* Jabber disable */
@@ -156,7 +153,7 @@ enum inter_frame_gap {
#define GMAC_CONTROL_RE 0x00000004 /* Receiver Enable */
#define GMAC_CORE_INIT (GMAC_CONTROL_JD | GMAC_CONTROL_PS | GMAC_CONTROL_ACS | \
- GMAC_CONTROL_JE | GMAC_CONTROL_BE)
+ GMAC_CONTROL_BE)
/* GMAC Frame Filter defines */
#define GMAC_FRAME_FILTER_PR 0x00000001 /* Promiscuous Mode */
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c
index cdd926832e27..b3e148ef5683 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c
@@ -32,10 +32,15 @@
#include <asm/io.h>
#include "dwmac1000.h"
-static void dwmac1000_core_init(void __iomem *ioaddr)
+static void dwmac1000_core_init(void __iomem *ioaddr, int mtu)
{
u32 value = readl(ioaddr + GMAC_CONTROL);
value |= GMAC_CORE_INIT;
+ if (mtu > 1500)
+ value |= GMAC_CONTROL_2K;
+ if (mtu > 2000)
+ value |= GMAC_CONTROL_JE;
+
writel(value, ioaddr + GMAC_CONTROL);
/* Mask GMAC interrupts */
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac100_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac100_core.c
index 5857d677dac1..2ff767bcfdd0 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac100_core.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac100_core.c
@@ -32,7 +32,7 @@
#include <asm/io.h>
#include "dwmac100.h"
-static void dwmac100_core_init(void __iomem *ioaddr)
+static void dwmac100_core_init(void __iomem *ioaddr, int mtu)
{
u32 value = readl(ioaddr + MAC_CONTROL);
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 5db91be962c2..d93aa87408c2 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -54,7 +54,6 @@
#include <linux/reset.h>
#define STMMAC_ALIGN(x) L1_CACHE_ALIGN(x)
-#define JUMBO_LEN 9000
/* Module parameters */
#define TX_TIMEO 5000
@@ -93,7 +92,7 @@ static int tc = TC_DEFAULT;
module_param(tc, int, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(tc, "DMA threshold control value");
-#define DMA_BUFFER_SIZE BUF_SIZE_2KiB
+#define DMA_BUFFER_SIZE BUF_SIZE_4KiB
static int buf_sz = DMA_BUFFER_SIZE;
module_param(buf_sz, int, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(buf_sz, "DMA buffer size");
@@ -994,6 +993,8 @@ static int init_dma_desc_rings(struct net_device *dev)
if (bfsize < BUF_SIZE_16KiB)
bfsize = stmmac_set_bfsize(dev->mtu, priv->dma_buf_sz);
+ priv->dma_buf_sz = bfsize;
+
if (netif_msg_probe(priv))
pr_debug("%s: txsize %d, rxsize %d, bfsize %d\n", __func__,
txsize, rxsize, bfsize);
@@ -1023,7 +1024,6 @@ static int init_dma_desc_rings(struct net_device *dev)
}
priv->cur_rx = 0;
priv->dirty_rx = (unsigned int)(i - rxsize);
- priv->dma_buf_sz = bfsize;
buf_sz = bfsize;
/* Setup the chained descriptor addresses */
@@ -1624,7 +1624,7 @@ static int stmmac_hw_setup(struct net_device *dev)
priv->plat->bus_setup(priv->ioaddr);
/* Initialize the MAC Core */
- priv->hw->mac->core_init(priv->ioaddr);
+ priv->hw->mac->core_init(priv->ioaddr, dev->mtu);
/* Enable the MAC Rx/Tx */
stmmac_set_mac(priv->ioaddr, true);
@@ -2274,6 +2274,9 @@ static int stmmac_change_mtu(struct net_device *dev, int new_mtu)
else
max_mtu = SKB_MAX_HEAD(NET_SKB_PAD + NET_IP_ALIGN);
+ if (priv->plat->maxmtu < max_mtu)
+ max_mtu = priv->plat->maxmtu;
+
if ((new_mtu < 46) || (new_mtu > max_mtu)) {
pr_err("%s: invalid MTU, max MTU is: %d\n", dev->name, max_mtu);
return -EINVAL;
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
index 9d4baa8b94ad..5884a7d2063b 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
@@ -102,6 +102,11 @@ static int stmmac_probe_config_dt(struct platform_device *pdev,
plat->force_sf_dma_mode = of_property_read_bool(np, "snps,force_sf_dma_mode");
+ /* Set the maxmtu to a default of JUMBO_LEN in case the
+ * parameter is not present in the device tree.
+ */
+ plat->maxmtu = JUMBO_LEN;
+
/*
* Currently only the properties needed on SPEAr600
* are provided. All other properties should be added
@@ -110,6 +115,14 @@ static int stmmac_probe_config_dt(struct platform_device *pdev,
if (of_device_is_compatible(np, "st,spear600-gmac") ||
of_device_is_compatible(np, "snps,dwmac-3.70a") ||
of_device_is_compatible(np, "snps,dwmac")) {
+ /* Note that the max-frame-size parameter as defined in the
+ * ePAPR v1.1 spec is defined as max-frame-size, it's
+ * actually used as the IEEE definition of MAC Client
+ * data, or MTU. The ePAPR specification is confusing as
+ * the definition is max-frame-size, but usage examples
+ * are clearly MTUs
+ */
+ of_property_read_u32(np, "max-frame-size", &plat->maxmtu);
plat->has_gmac = 1;
plat->pmt = 1;
}
diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h
index 1367974b7e84..6f27d4f957bd 100644
--- a/include/linux/stmmac.h
+++ b/include/linux/stmmac.h
@@ -111,6 +111,7 @@ struct plat_stmmacenet_data {
int force_thresh_dma_mode;
int riwt_off;
int max_speed;
+ int maxmtu;
void (*fix_mac_speed)(void *priv, unsigned int speed);
void (*bus_setup)(void __iomem *ioaddr);
void *(*setup)(struct platform_device *pdev);
generated by cgit v1.2.3 (git 2.39.1) at 2024-09-17 02:31:35 +0000