summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--drivers/ide/ide-cs.c45
-rw-r--r--drivers/isdn/hardware/avm/avm_cs.c51
-rw-r--r--drivers/isdn/hisax/avma1_cs.c57
-rw-r--r--drivers/isdn/hisax/elsa_cs.c55
-rw-r--r--drivers/isdn/hisax/sedlbauer_cs.c84
-rw-r--r--drivers/isdn/hisax/teles_cs.c62
-rw-r--r--drivers/mtd/maps/pcmciamtd.c21
-rw-r--r--drivers/net/pcmcia/3c574_cs.c23
-rw-r--r--drivers/net/pcmcia/3c589_cs.c35
-rw-r--r--drivers/net/pcmcia/axnet_cs.c33
-rw-r--r--drivers/net/pcmcia/com20020_cs.c33
-rw-r--r--drivers/net/pcmcia/ibmtr_cs.c33
-rw-r--r--drivers/net/pcmcia/nmclan_cs.c28
-rw-r--r--drivers/net/pcmcia/pcnet_cs.c42
-rw-r--r--drivers/net/pcmcia/smc91c92_cs.c33
-rw-r--r--drivers/net/pcmcia/xirc2ps_cs.c53
-rw-r--r--drivers/net/wireless/airo_cs.c71
-rw-r--r--drivers/net/wireless/atmel_cs.c69
-rw-r--r--drivers/net/wireless/hostap/hostap_cs.c8
-rw-r--r--drivers/net/wireless/libertas/if_cs.c30
-rw-r--r--drivers/net/wireless/orinoco/orinoco_cs.c44
-rw-r--r--drivers/net/wireless/orinoco/spectrum_cs.c44
-rw-r--r--drivers/net/wireless/ray_cs.c35
-rw-r--r--drivers/net/wireless/wl3501_cs.c35
-rw-r--r--drivers/parport/parport_cs.c33
-rw-r--r--drivers/scsi/pcmcia/nsp_cs.c26
-rw-r--r--drivers/serial/serial_cs.c32
-rw-r--r--drivers/staging/comedi/drivers/cb_das16_cs.c5
-rw-r--r--drivers/staging/comedi/drivers/das08_cs.c68
-rw-r--r--drivers/staging/comedi/drivers/ni_daq_700.c61
-rw-r--r--drivers/staging/comedi/drivers/ni_daq_dio24.c61
-rw-r--r--drivers/staging/comedi/drivers/ni_labpc_cs.c75
-rw-r--r--drivers/staging/comedi/drivers/quatech_daqp_cs.c64
-rw-r--r--drivers/staging/wlags49_h2/wl_cs.c61
-rw-r--r--drivers/staging/wlags49_h2/wl_main.c19
35 files changed, 3 insertions, 1526 deletions
diff --git a/drivers/ide/ide-cs.c b/drivers/ide/ide-cs.c
index 54702cc8e0d4..404843e8611b 100644
--- a/drivers/ide/ide-cs.c
+++ b/drivers/ide/ide-cs.c
@@ -71,17 +71,6 @@ static int ide_config(struct pcmcia_device *);
static void ide_detach(struct pcmcia_device *p_dev);
-
-
-
-/*======================================================================
-
- ide_attach() creates an "instance" of the driver, allocating
- local data structures for one device. The device is registered
- with Card Services.
-
-======================================================================*/
-
static int ide_probe(struct pcmcia_device *link)
{
ide_info_t *info;
@@ -102,15 +91,6 @@ static int ide_probe(struct pcmcia_device *link)
return ide_config(link);
} /* ide_attach */
-/*======================================================================
-
- This deletes a driver "instance". The device is de-registered
- with Card Services. If it has been released, all local data
- structures are freed. Otherwise, the structures will be freed
- when the device is released.
-
-======================================================================*/
-
static void ide_detach(struct pcmcia_device *link)
{
ide_info_t *info = link->priv;
@@ -184,14 +164,6 @@ out_release:
return NULL;
}
-/*======================================================================
-
- ide_config() is scheduled to run after a CARD_INSERTION event
- is received, to configure the PCMCIA socket, and to make the
- ide device available to the system.
-
-======================================================================*/
-
static int pcmcia_check_one_config(struct pcmcia_device *pdev, void *priv_data)
{
int *is_kme = priv_data;
@@ -275,14 +247,6 @@ failed:
return -ENODEV;
} /* ide_config */
-/*======================================================================
-
- After a card is removed, ide_release() will unregister the net
- device, and release the PCMCIA configuration. If the device is
- still open, this will be postponed until it is closed.
-
-======================================================================*/
-
static void ide_release(struct pcmcia_device *link)
{
ide_info_t *info = link->priv;
@@ -308,15 +272,6 @@ static void ide_release(struct pcmcia_device *link)
} /* ide_release */
-/*======================================================================
-
- The card status event handler. Mostly, this schedules other
- stuff to run after an event is received. A CARD_REMOVAL event
- also sets some flags to discourage the ide drivers from
- talking to the ports.
-
-======================================================================*/
-
static struct pcmcia_device_id ide_ids[] = {
PCMCIA_DEVICE_FUNC_ID(4),
PCMCIA_DEVICE_MANF_CARD(0x0000, 0x0000), /* Corsair */
diff --git a/drivers/isdn/hardware/avm/avm_cs.c b/drivers/isdn/hardware/avm/avm_cs.c
index b172361bbef8..91f06a3ef002 100644
--- a/drivers/isdn/hardware/avm/avm_cs.c
+++ b/drivers/isdn/hardware/avm/avm_cs.c
@@ -38,38 +38,10 @@ MODULE_LICENSE("GPL");
/*====================================================================*/
-/*
- The event() function is this driver's Card Services event handler.
- It will be called by Card Services when an appropriate card status
- event is received. The config() and release() entry points are
- used to configure or release a socket, in response to card insertion
- and ejection events. They are invoked from the skeleton event
- handler.
-*/
-
static int avmcs_config(struct pcmcia_device *link);
static void avmcs_release(struct pcmcia_device *link);
-
-/*
- The attach() and detach() entry points are used to create and destroy
- "instances" of the driver, where each instance represents everything
- needed to manage one actual PCMCIA card.
-*/
-
static void avmcs_detach(struct pcmcia_device *p_dev);
-/*======================================================================
-
- avmcs_attach() creates an "instance" of the driver, allocating
- local data structures for one device. The device is registered
- with Card Services.
-
- The dev_link structure is initialized, but we don't actually
- configure the card at this point -- we wait until we receive a
- card insertion event.
-
-======================================================================*/
-
static int avmcs_probe(struct pcmcia_device *p_dev)
{
/* General socket configuration */
@@ -80,28 +52,12 @@ static int avmcs_probe(struct pcmcia_device *p_dev)
return avmcs_config(p_dev);
} /* avmcs_attach */
-/*======================================================================
-
- This deletes a driver "instance". The device is de-registered
- with Card Services. If it has been released, all local data
- structures are freed. Otherwise, the structures will be freed
- when the device is released.
-
-======================================================================*/
static void avmcs_detach(struct pcmcia_device *link)
{
avmcs_release(link);
} /* avmcs_detach */
-/*======================================================================
-
- avmcs_config() is scheduled to run after a CARD_INSERTION event
- is received, to configure the PCMCIA socket, and to make the
- ethernet device available to the system.
-
-======================================================================*/
-
static int avmcs_configcheck(struct pcmcia_device *p_dev, void *priv_data)
{
p_dev->resource[0]->end = 16;
@@ -185,13 +141,6 @@ static int avmcs_config(struct pcmcia_device *link)
} /* avmcs_config */
-/*======================================================================
-
- After a card is removed, avmcs_release() will unregister the net
- device, and release the PCMCIA configuration. If the device is
- still open, this will be postponed until it is closed.
-
-======================================================================*/
static void avmcs_release(struct pcmcia_device *link)
{
diff --git a/drivers/isdn/hisax/avma1_cs.c b/drivers/isdn/hisax/avma1_cs.c
index 62616c871c78..ac4dd7857cbd 100644
--- a/drivers/isdn/hisax/avma1_cs.c
+++ b/drivers/isdn/hisax/avma1_cs.c
@@ -39,39 +39,10 @@ module_param(isdnprot, int, 0);
/*====================================================================*/
-/*
- The event() function is this driver's Card Services event handler.
- It will be called by Card Services when an appropriate card status
- event is received. The config() and release() entry points are
- used to configure or release a socket, in response to card insertion
- and ejection events. They are invoked from the skeleton event
- handler.
-*/
-
static int avma1cs_config(struct pcmcia_device *link) __devinit ;
static void avma1cs_release(struct pcmcia_device *link);
-
-/*
- The attach() and detach() entry points are used to create and destroy
- "instances" of the driver, where each instance represents everything
- needed to manage one actual PCMCIA card.
-*/
-
static void avma1cs_detach(struct pcmcia_device *p_dev) __devexit ;
-
-/*======================================================================
-
- avma1cs_attach() creates an "instance" of the driver, allocating
- local data structures for one device. The device is registered
- with Card Services.
-
- The dev_link structure is initialized, but we don't actually
- configure the card at this point -- we wait until we receive a
- card insertion event.
-
-======================================================================*/
-
static int __devinit avma1cs_probe(struct pcmcia_device *p_dev)
{
dev_dbg(&p_dev->dev, "avma1cs_attach()\n");
@@ -84,15 +55,6 @@ static int __devinit avma1cs_probe(struct pcmcia_device *p_dev)
return avma1cs_config(p_dev);
} /* avma1cs_attach */
-/*======================================================================
-
- This deletes a driver "instance". The device is de-registered
- with Card Services. If it has been released, all local data
- structures are freed. Otherwise, the structures will be freed
- when the device is released.
-
-======================================================================*/
-
static void __devexit avma1cs_detach(struct pcmcia_device *link)
{
dev_dbg(&link->dev, "avma1cs_detach(0x%p)\n", link);
@@ -100,14 +62,6 @@ static void __devexit avma1cs_detach(struct pcmcia_device *link)
kfree(link->priv);
} /* avma1cs_detach */
-/*======================================================================
-
- avma1cs_config() is scheduled to run after a CARD_INSERTION event
- is received, to configure the PCMCIA socket, and to make the
- ethernet device available to the system.
-
-======================================================================*/
-
static int avma1cs_configcheck(struct pcmcia_device *p_dev, void *priv_data)
{
p_dev->resource[0]->end = 16;
@@ -180,14 +134,6 @@ static int __devinit avma1cs_config(struct pcmcia_device *link)
return 0;
} /* avma1cs_config */
-/*======================================================================
-
- After a card is removed, avma1cs_release() will unregister the net
- device, and release the PCMCIA configuration. If the device is
- still open, this will be postponed until it is closed.
-
-======================================================================*/
-
static void avma1cs_release(struct pcmcia_device *link)
{
unsigned long minor = (unsigned long) link->priv;
@@ -200,7 +146,6 @@ static void avma1cs_release(struct pcmcia_device *link)
pcmcia_disable_device(link);
} /* avma1cs_release */
-
static struct pcmcia_device_id avma1cs_ids[] = {
PCMCIA_DEVICE_PROD_ID12("AVM", "ISDN A", 0x95d42008, 0xadc9d4bb),
PCMCIA_DEVICE_PROD_ID12("ISDN", "CARD", 0x8d9761c8, 0x01c5aa7b),
@@ -216,8 +161,6 @@ static struct pcmcia_driver avma1cs_driver = {
.id_table = avma1cs_ids,
};
-/*====================================================================*/
-
static int __init init_avma1_cs(void)
{
return pcmcia_register_driver(&avma1cs_driver);
diff --git a/drivers/isdn/hisax/elsa_cs.c b/drivers/isdn/hisax/elsa_cs.c
index 2d439a79fd88..496d477af0f8 100644
--- a/drivers/isdn/hisax/elsa_cs.c
+++ b/drivers/isdn/hisax/elsa_cs.c
@@ -63,26 +63,8 @@ MODULE_LICENSE("Dual MPL/GPL");
static int protocol = 2; /* EURO-ISDN Default */
module_param(protocol, int, 0);
-/*====================================================================*/
-
-/*
- The event() function is this driver's Card Services event handler.
- It will be called by Card Services when an appropriate card status
- event is received. The config() and release() entry points are
- used to configure or release a socket, in response to card insertion
- and ejection events. They are invoked from the elsa_cs event
- handler.
-*/
-
static int elsa_cs_config(struct pcmcia_device *link) __devinit ;
static void elsa_cs_release(struct pcmcia_device *link);
-
-/*
- The attach() and detach() entry points are used to create and destroy
- "instances" of the driver, where each instance represents everything
- needed to manage one actual PCMCIA card.
-*/
-
static void elsa_cs_detach(struct pcmcia_device *p_dev) __devexit;
typedef struct local_info_t {
@@ -91,18 +73,6 @@ typedef struct local_info_t {
int cardnr;
} local_info_t;
-/*======================================================================
-
- elsa_cs_attach() creates an "instance" of the driver, allocatingx
- local data structures for one device. The device is registered
- with Card Services.
-
- The dev_link structure is initialized, but we don't actually
- configure the card at this point -- we wait until we receive a
- card insertion event.
-
-======================================================================*/
-
static int __devinit elsa_cs_probe(struct pcmcia_device *link)
{
local_info_t *local;
@@ -121,15 +91,6 @@ static int __devinit elsa_cs_probe(struct pcmcia_device *link)
return elsa_cs_config(link);
} /* elsa_cs_attach */
-/*======================================================================
-
- This deletes a driver "instance". The device is de-registered
- with Card Services. If it has been released, all local data
- structures are freed. Otherwise, the structures will be freed
- when the device is released.
-
-======================================================================*/
-
static void __devexit elsa_cs_detach(struct pcmcia_device *link)
{
local_info_t *info = link->priv;
@@ -142,14 +103,6 @@ static void __devexit elsa_cs_detach(struct pcmcia_device *link)
kfree(info);
} /* elsa_cs_detach */
-/*======================================================================
-
- elsa_cs_config() is scheduled to run after a CARD_INSERTION event
- is received, to configure the PCMCIA socket, and to make the
- device available to the system.
-
-======================================================================*/
-
static int elsa_cs_configcheck(struct pcmcia_device *p_dev, void *priv_data)
{
int j;
@@ -215,14 +168,6 @@ failed:
return -ENODEV;
} /* elsa_cs_config */
-/*======================================================================
-
- After a card is removed, elsa_cs_release() will unregister the net
- device, and release the PCMCIA configuration. If the device is
- still open, this will be postponed until it is closed.
-
-======================================================================*/
-
static void elsa_cs_release(struct pcmcia_device *link)
{
local_info_t *local = link->priv;
diff --git a/drivers/isdn/hisax/sedlbauer_cs.c b/drivers/isdn/hisax/sedlbauer_cs.c
index 9e5c4fd08671..360204bc2777 100644
--- a/drivers/isdn/hisax/sedlbauer_cs.c
+++ b/drivers/isdn/hisax/sedlbauer_cs.c
@@ -63,26 +63,9 @@ MODULE_LICENSE("Dual MPL/GPL");
static int protocol = 2; /* EURO-ISDN Default */
module_param(protocol, int, 0);
-/*====================================================================*/
-
-/*
- The event() function is this driver's Card Services event handler.
- It will be called by Card Services when an appropriate card status
- event is received. The config() and release() entry points are
- used to configure or release a socket, in response to card
- insertion and ejection events. They are invoked from the sedlbauer
- event handler.
-*/
-
static int sedlbauer_config(struct pcmcia_device *link) __devinit ;
static void sedlbauer_release(struct pcmcia_device *link);
-/*
- The attach() and detach() entry points are used to create and destroy
- "instances" of the driver, where each instance represents everything
- needed to manage one actual PCMCIA card.
-*/
-
static void sedlbauer_detach(struct pcmcia_device *p_dev) __devexit;
typedef struct local_info_t {
@@ -91,18 +74,6 @@ typedef struct local_info_t {
int cardnr;
} local_info_t;
-/*======================================================================
-
- sedlbauer_attach() creates an "instance" of the driver, allocating
- local data structures for one device. The device is registered
- with Card Services.
-
- The dev_link structure is initialized, but we don't actually
- configure the card at this point -- we wait until we receive a
- card insertion event.
-
-======================================================================*/
-
static int __devinit sedlbauer_probe(struct pcmcia_device *link)
{
local_info_t *local;
@@ -117,30 +88,9 @@ static int __devinit sedlbauer_probe(struct pcmcia_device *link)
local->p_dev = link;
link->priv = local;
- /*
- General socket configuration defaults can go here. In this
- client, we assume very little, and rely on the CIS for almost
- everything. In most clients, many details (i.e., number, sizes,
- and attributes of IO windows) are fixed by the nature of the
- device, and can be hard-wired here.
- */
-
- /* from old sedl_cs
- */
- /* The io structure describes IO port mapping */
-
return sedlbauer_config(link);
} /* sedlbauer_attach */
-/*======================================================================
-
- This deletes a driver "instance". The device is de-registered
- with Card Services. If it has been released, all local data
- structures are freed. Otherwise, the structures will be freed
- when the device is released.
-
-======================================================================*/
-
static void __devexit sedlbauer_detach(struct pcmcia_device *link)
{
dev_dbg(&link->dev, "sedlbauer_detach(0x%p)\n", link);
@@ -152,13 +102,6 @@ static void __devexit sedlbauer_detach(struct pcmcia_device *link)
kfree(link->priv);
} /* sedlbauer_detach */
-/*======================================================================
-
- sedlbauer_config() is scheduled to run after a CARD_INSERTION event
- is received, to configure the PCMCIA socket, and to make the
- device available to the system.
-
-======================================================================*/
static int sedlbauer_config_check(struct pcmcia_device *p_dev, void *priv_data)
{
if (p_dev->config_index == 0)
@@ -168,8 +111,6 @@ static int sedlbauer_config_check(struct pcmcia_device *p_dev, void *priv_data)
return pcmcia_request_io(p_dev);
}
-
-
static int __devinit sedlbauer_config(struct pcmcia_device *link)
{
int ret;
@@ -180,27 +121,10 @@ static int __devinit sedlbauer_config(struct pcmcia_device *link)
link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_CHECK_VCC |
CONF_AUTO_SET_VPP | CONF_AUTO_AUDIO | CONF_AUTO_SET_IO;
- /*
- In this loop, we scan the CIS for configuration table entries,
- each of which describes a valid card configuration, including
- voltage, IO window, memory window, and interrupt settings.
-
- We make no assumptions about the card to be configured: we use
- just the information available in the CIS. In an ideal world,
- this would work for any PCMCIA card, but it requires a complete
- and accurate CIS. In practice, a driver usually "knows" most of
- these things without consulting the CIS, and most client drivers
- will only use the CIS to fill in implementation-defined details.
- */
ret = pcmcia_loop_config(link, sedlbauer_config_check, NULL);
if (ret)
goto failed;
- /*
- This actually configures the PCMCIA socket -- setting up
- the I/O windows and the interrupt mapping, and putting the
- card and host interface into "Memory and IO" mode.
- */
ret = pcmcia_enable_device(link);
if (ret)
goto failed;
@@ -228,14 +152,6 @@ failed:
} /* sedlbauer_config */
-/*======================================================================
-
- After a card is removed, sedlbauer_release() will unregister the
- device, and release the PCMCIA configuration. If the device is
- still open, this will be postponed until it is closed.
-
-======================================================================*/
-
static void sedlbauer_release(struct pcmcia_device *link)
{
local_info_t *local = link->priv;
diff --git a/drivers/isdn/hisax/teles_cs.c b/drivers/isdn/hisax/teles_cs.c
index 82f09b864846..282a4467ef19 100644
--- a/drivers/isdn/hisax/teles_cs.c
+++ b/drivers/isdn/hisax/teles_cs.c
@@ -44,26 +44,8 @@ MODULE_LICENSE("GPL");
static int protocol = 2; /* EURO-ISDN Default */
module_param(protocol, int, 0);
-/*====================================================================*/
-
-/*
- The event() function is this driver's Card Services event handler.
- It will be called by Card Services when an appropriate card status
- event is received. The config() and release() entry points are
- used to configure or release a socket, in response to card insertion
- and ejection events. They are invoked from the teles_cs event
- handler.
-*/
-
static int teles_cs_config(struct pcmcia_device *link) __devinit ;
static void teles_cs_release(struct pcmcia_device *link);
-
-/*
- The attach() and detach() entry points are used to create and destroy
- "instances" of the driver, where each instance represents everything
- needed to manage one actual PCMCIA card.
-*/
-
static void teles_detach(struct pcmcia_device *p_dev) __devexit ;
typedef struct local_info_t {
@@ -72,18 +54,6 @@ typedef struct local_info_t {
int cardnr;
} local_info_t;
-/*======================================================================
-
- teles_attach() creates an "instance" of the driver, allocatingx
- local data structures for one device. The device is registered
- with Card Services.
-
- The dev_link structure is initialized, but we don't actually
- configure the card at this point -- we wait until we receive a
- card insertion event.
-
-======================================================================*/
-
static int __devinit teles_probe(struct pcmcia_device *link)
{
local_info_t *local;
@@ -98,27 +68,11 @@ static int __devinit teles_probe(struct pcmcia_device *link)
local->p_dev = link;
link->priv = local;
- /*
- General socket configuration defaults can go here. In this
- client, we assume very little, and rely on the CIS for almost
- everything. In most clients, many details (i.e., number, sizes,
- and attributes of IO windows) are fixed by the nature of the
- device, and can be hard-wired here.
- */
link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO;
return teles_cs_config(link);
} /* teles_attach */
-/*======================================================================
-
- This deletes a driver "instance". The device is de-registered
- with Card Services. If it has been released, all local data
- structures are freed. Otherwise, the structures will be freed
- when the device is released.
-
-======================================================================*/
-
static void __devexit teles_detach(struct pcmcia_device *link)
{
local_info_t *info = link->priv;
@@ -131,14 +85,6 @@ static void __devexit teles_detach(struct pcmcia_device *link)
kfree(info);
} /* teles_detach */
-/*======================================================================
-
- teles_cs_config() is scheduled to run after a CARD_INSERTION event
- is received, to configure the PCMCIA socket, and to make the
- device available to the system.
-
-======================================================================*/
-
static int teles_cs_configcheck(struct pcmcia_device *p_dev, void *priv_data)
{
int j;
@@ -204,14 +150,6 @@ cs_failed:
return -ENODEV;
} /* teles_cs_config */
-/*======================================================================
-
- After a card is removed, teles_cs_release() will unregister the net
- device, and release the PCMCIA configuration. If the device is
- still open, this will be postponed until it is closed.
-
-======================================================================*/
-
static void teles_cs_release(struct pcmcia_device *link)
{
local_info_t *local = link->priv;
diff --git a/drivers/mtd/maps/pcmciamtd.c b/drivers/mtd/maps/pcmciamtd.c
index 5df89e742a33..57a1acfe22c4 100644
--- a/drivers/mtd/maps/pcmciamtd.c
+++ b/drivers/mtd/maps/pcmciamtd.c
@@ -321,11 +321,6 @@ static void pcmciamtd_set_vpp(struct map_info *map, int on)
}
-/* After a card is removed, pcmciamtd_release() will unregister the
- * device, and release the PCMCIA configuration. If the device is
- * still open, this will be postponed until it is closed.
- */
-
static void pcmciamtd_release(struct pcmcia_device *link)
{
struct pcmciamtd_dev *dev = link->priv;
@@ -475,11 +470,6 @@ static void card_settings(struct pcmciamtd_dev *dev, struct pcmcia_device *p_dev
}
-/* pcmciamtd_config() is scheduled to run after a CARD_INSERTION event
- * is received, to configure the PCMCIA socket, and to make the
- * MTD device available to the system.
- */
-
static int pcmciamtd_config(struct pcmcia_device *link)
{
struct pcmciamtd_dev *dev = link->priv;
@@ -676,12 +666,6 @@ static int pcmciamtd_resume(struct pcmcia_device *dev)
}
-/* This deletes a driver "instance". The device is de-registered
- * with Card Services. If it has been released, all local data
- * structures are freed. Otherwise, the structures will be freed
- * when the device is released.
- */
-
static void pcmciamtd_detach(struct pcmcia_device *link)
{
struct pcmciamtd_dev *dev = link->priv;
@@ -699,11 +683,6 @@ static void pcmciamtd_detach(struct pcmcia_device *link)
}
-/* pcmciamtd_attach() creates an "instance" of the driver, allocating
- * local data structures for one device. The device is registered
- * with Card Services.
- */
-
static int pcmciamtd_probe(struct pcmcia_device *link)
{
struct pcmciamtd_dev *dev;
diff --git a/drivers/net/pcmcia/3c574_cs.c b/drivers/net/pcmcia/3c574_cs.c
index ba52b0b6d93b..ff824e11f0b6 100644
--- a/drivers/net/pcmcia/3c574_cs.c
+++ b/drivers/net/pcmcia/3c574_cs.c
@@ -287,16 +287,7 @@ static int tc574_probe(struct pcmcia_device *link)
dev->watchdog_timeo = TX_TIMEOUT;
return tc574_config(link);
-} /* tc574_attach */
-
-/*
-
- This deletes a driver "instance". The device is de-registered
- with Card Services. If it has been released, all local data
- structures are freed. Otherwise, the structures will be freed
- when the device is released.
-
-*/
+}
static void tc574_detach(struct pcmcia_device *link)
{
@@ -311,12 +302,6 @@ static void tc574_detach(struct pcmcia_device *link)
free_netdev(dev);
} /* tc574_detach */
-/*
- tc574_config() is scheduled to run after a CARD_INSERTION event
- is received, to configure the PCMCIA socket, and to make the
- ethernet device available to the system.
-*/
-
static const char *ram_split[] = {"5:3", "3:1", "1:1", "3:5"};
static int tc574_config(struct pcmcia_device *link)
@@ -463,12 +448,6 @@ failed:
} /* tc574_config */
-/*
- After a card is removed, tc574_release() will unregister the net
- device, and release the PCMCIA configuration. If the device is
- still open, this will be postponed until it is closed.
-*/
-
static void tc574_release(struct pcmcia_device *link)
{
pcmcia_disable_device(link);
diff --git a/drivers/net/pcmcia/3c589_cs.c b/drivers/net/pcmcia/3c589_cs.c
index 551759c25a74..a07e22295330 100644
--- a/drivers/net/pcmcia/3c589_cs.c
+++ b/drivers/net/pcmcia/3c589_cs.c
@@ -175,14 +175,6 @@ static const struct ethtool_ops netdev_ethtool_ops;
static void tc589_detach(struct pcmcia_device *p_dev);
-/*======================================================================
-
- tc589_attach() creates an "instance" of the driver, allocating
- local data structures for one device. The device is registered
- with Card Services.
-
-======================================================================*/
-
static const struct net_device_ops el3_netdev_ops = {
.ndo_open = el3_open,
.ndo_stop = el3_close,
@@ -224,16 +216,7 @@ static int tc589_probe(struct pcmcia_device *link)
SET_ETHTOOL_OPS(dev, &netdev_ethtool_ops);
return tc589_config(link);
-} /* tc589_attach */
-
-/*======================================================================
-
- This deletes a driver "instance". The device is de-registered
- with Card Services. If it has been released, all local data
- structures are freed. Otherwise, the structures will be freed
- when the device is released.
-
-======================================================================*/
+}
static void tc589_detach(struct pcmcia_device *link)
{
@@ -248,14 +231,6 @@ static void tc589_detach(struct pcmcia_device *link)
free_netdev(dev);
} /* tc589_detach */
-/*======================================================================
-
- tc589_config() is scheduled to run after a CARD_INSERTION event
- is received, to configure the PCMCIA socket, and to make the
- ethernet device available to the system.
-
-======================================================================*/
-
static int tc589_config(struct pcmcia_device *link)
{
struct net_device *dev = link->priv;
@@ -350,14 +325,6 @@ failed:
return -ENODEV;
} /* tc589_config */
-/*======================================================================
-
- After a card is removed, tc589_release() will unregister the net
- device, and release the PCMCIA configuration. If the device is
- still open, this will be postponed until it is closed.
-
-======================================================================*/
-
static void tc589_release(struct pcmcia_device *link)
{
pcmcia_disable_device(link);
diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c
index fb5a39ba4801..9e8b28b271ae 100644
--- a/drivers/net/pcmcia/axnet_cs.c
+++ b/drivers/net/pcmcia/axnet_cs.c
@@ -139,14 +139,6 @@ static const struct net_device_ops axnet_netdev_ops = {
.ndo_validate_addr = eth_validate_addr,
};
-/*======================================================================
-
- axnet_attach() creates an "instance" of the driver, allocating
- local data structures for one device. The device is registered
- with Card Services.
-
-======================================================================*/
-
static int axnet_probe(struct pcmcia_device *link)
{
axnet_dev_t *info;
@@ -175,15 +167,6 @@ static int axnet_probe(struct pcmcia_device *link)
return axnet_config(link);
} /* axnet_attach */
-/*======================================================================
-
- This deletes a driver "instance". The device is de-registered
- with Card Services. If it has been released, all local data
- structures are freed. Otherwise, the structures will be freed
- when the device is released.
-
-======================================================================*/
-
static void axnet_detach(struct pcmcia_device *link)
{
struct net_device *dev = link->priv;
@@ -246,14 +229,6 @@ static int get_prom(struct pcmcia_device *link)
return 1;
} /* get_prom */
-/*======================================================================
-
- axnet_config() is scheduled to run after a CARD_INSERTION event
- is received, to configure the PCMCIA socket, and to make the
- ethernet device available to the system.
-
-======================================================================*/
-
static int try_io_port(struct pcmcia_device *link)
{
int j, ret;
@@ -392,14 +367,6 @@ failed:
return -ENODEV;
} /* axnet_config */
-/*======================================================================
-
- After a card is removed, axnet_release() will unregister the net
- device, and release the PCMCIA configuration. If the device is
- still open, this will be postponed until it is closed.
-
-======================================================================*/
-
static void axnet_release(struct pcmcia_device *link)
{
pcmcia_disable_device(link);
diff --git a/drivers/net/pcmcia/com20020_cs.c b/drivers/net/pcmcia/com20020_cs.c
index a5d918ea5b13..b706a7249477 100644
--- a/drivers/net/pcmcia/com20020_cs.c
+++ b/drivers/net/pcmcia/com20020_cs.c
@@ -122,14 +122,6 @@ typedef struct com20020_dev_t {
struct net_device *dev;
} com20020_dev_t;
-/*======================================================================
-
- com20020_attach() creates an "instance" of the driver, allocating
- local data structures for one device. The device is registered
- with Card Services.
-
-======================================================================*/
-
static int com20020_probe(struct pcmcia_device *p_dev)
{
com20020_dev_t *info;
@@ -172,15 +164,6 @@ fail_alloc_info:
return -ENOMEM;
} /* com20020_attach */
-/*======================================================================
-
- This deletes a driver "instance". The device is de-registered
- with Card Services. If it has been released, all local data
- structures are freed. Otherwise, the structures will be freed
- when the device is released.
-
-======================================================================*/
-
static void com20020_detach(struct pcmcia_device *link)
{
struct com20020_dev_t *info = link->priv;
@@ -219,14 +202,6 @@ static void com20020_detach(struct pcmcia_device *link)
} /* com20020_detach */
-/*======================================================================
-
- com20020_config() is scheduled to run after a CARD_INSERTION event
- is received, to configure the PCMCIA socket, and to make the
- device available to the system.
-
-======================================================================*/
-
static int com20020_config(struct pcmcia_device *link)
{
struct arcnet_local *lp;
@@ -314,14 +289,6 @@ failed:
return -ENODEV;
} /* com20020_config */
-/*======================================================================
-
- After a card is removed, com20020_release() will unregister the net
- device, and release the PCMCIA configuration. If the device is
- still open, this will be postponed until it is closed.
-
-======================================================================*/
-
static void com20020_release(struct pcmcia_device *link)
{
dev_dbg(&link->dev, "com20020_release\n");
diff --git a/drivers/net/pcmcia/ibmtr_cs.c b/drivers/net/pcmcia/ibmtr_cs.c
index d3c9f016f791..bf7dff96d881 100644
--- a/drivers/net/pcmcia/ibmtr_cs.c
+++ b/drivers/net/pcmcia/ibmtr_cs.c
@@ -121,14 +121,6 @@ static irqreturn_t ibmtr_interrupt(int irq, void *dev_id) {
return tok_interrupt(irq, dev);
};
-/*======================================================================
-
- ibmtr_attach() creates an "instance" of the driver, allocating
- local data structures for one device. The device is registered
- with Card Services.
-
-======================================================================*/
-
static int __devinit ibmtr_attach(struct pcmcia_device *link)
{
ibmtr_dev_t *info;
@@ -161,15 +153,6 @@ static int __devinit ibmtr_attach(struct pcmcia_device *link)
return ibmtr_config(link);
} /* ibmtr_attach */
-/*======================================================================
-
- This deletes a driver "instance". The device is de-registered
- with Card Services. If it has been released, all local data
- structures are freed. Otherwise, the structures will be freed
- when the device is released.
-
-======================================================================*/
-
static void ibmtr_detach(struct pcmcia_device *link)
{
struct ibmtr_dev_t *info = link->priv;
@@ -194,14 +177,6 @@ static void ibmtr_detach(struct pcmcia_device *link)
kfree(info);
} /* ibmtr_detach */
-/*======================================================================
-
- ibmtr_config() is scheduled to run after a CARD_INSERTION event
- is received, to configure the PCMCIA socket, and to make the
- token-ring device available to the system.
-
-======================================================================*/
-
static int __devinit ibmtr_config(struct pcmcia_device *link)
{
ibmtr_dev_t *info = link->priv;
@@ -297,14 +272,6 @@ failed:
return -ENODEV;
} /* ibmtr_config */
-/*======================================================================
-
- After a card is removed, ibmtr_release() will unregister the net
- device, and release the PCMCIA configuration. If the device is
- still open, this will be postponed until it is closed.
-
-======================================================================*/
-
static void ibmtr_release(struct pcmcia_device *link)
{
ibmtr_dev_t *info = link->priv;
diff --git a/drivers/net/pcmcia/nmclan_cs.c b/drivers/net/pcmcia/nmclan_cs.c
index 8e5730c42ce6..1eca4f5a6e78 100644
--- a/drivers/net/pcmcia/nmclan_cs.c
+++ b/drivers/net/pcmcia/nmclan_cs.c
@@ -434,13 +434,6 @@ static const struct net_device_ops mace_netdev_ops = {
.ndo_validate_addr = eth_validate_addr,
};
-/* ----------------------------------------------------------------------------
-nmclan_attach
- Creates an "instance" of the driver, allocating local data
- structures for one device. The device is registered with Card
- Services.
----------------------------------------------------------------------------- */
-
static int nmclan_probe(struct pcmcia_device *link)
{
mace_private *lp;
@@ -472,14 +465,6 @@ static int nmclan_probe(struct pcmcia_device *link)
return nmclan_config(link);
} /* nmclan_attach */
-/* ----------------------------------------------------------------------------
-nmclan_detach
- This deletes a driver "instance". The device is de-registered
- with Card Services. If it has been released, all local data
- structures are freed. Otherwise, the structures will be freed
- when the device is released.
----------------------------------------------------------------------------- */
-
static void nmclan_detach(struct pcmcia_device *link)
{
struct net_device *dev = link->priv;
@@ -623,13 +608,6 @@ static int mace_init(mace_private *lp, unsigned int ioaddr, char *enet_addr)
return 0;
} /* mace_init */
-/* ----------------------------------------------------------------------------
-nmclan_config
- This routine is scheduled to run after a CARD_INSERTION event
- is received, to configure the PCMCIA socket, and to make the
- ethernet device available to the system.
----------------------------------------------------------------------------- */
-
static int nmclan_config(struct pcmcia_device *link)
{
struct net_device *dev = link->priv;
@@ -710,12 +688,6 @@ failed:
return -ENODEV;
} /* nmclan_config */
-/* ----------------------------------------------------------------------------
-nmclan_release
- After a card is removed, nmclan_release() will unregister the
- net device, and release the PCMCIA configuration. If the device
- is still open, this will be postponed until it is closed.
----------------------------------------------------------------------------- */
static void nmclan_release(struct pcmcia_device *link)
{
dev_dbg(&link->dev, "nmclan_release\n");
diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c
index 22987e6a685e..5d7d1d3088ae 100644
--- a/drivers/net/pcmcia/pcnet_cs.c
+++ b/drivers/net/pcmcia/pcnet_cs.c
@@ -237,14 +237,6 @@ static const struct net_device_ops pcnet_netdev_ops = {
#endif
};
-/*======================================================================
-
- pcnet_attach() creates an "instance" of the driver, allocating
- local data structures for one device. The device is registered
- with Card Services.
-
-======================================================================*/
-
static int pcnet_probe(struct pcmcia_device *link)
{
pcnet_dev_t *info;
@@ -266,15 +258,6 @@ static int pcnet_probe(struct pcmcia_device *link)
return pcnet_config(link);
} /* pcnet_attach */
-/*======================================================================
-
- This deletes a driver "instance". The device is de-registered
- with Card Services. If it has been released, all local data
- structures are freed. Otherwise, the structures will be freed
- when the device is released.
-
-======================================================================*/
-
static void pcnet_detach(struct pcmcia_device *link)
{
struct net_device *dev = link->priv;
@@ -461,14 +444,6 @@ static hw_info_t *get_hwired(struct pcmcia_device *link)
return &default_info;
} /* get_hwired */
-/*======================================================================
-
- pcnet_config() is scheduled to run after a CARD_INSERTION event
- is received, to configure the PCMCIA socket, and to make the
- ethernet device available to the system.
-
-======================================================================*/
-
static int try_io_port(struct pcmcia_device *link)
{
int j, ret;
@@ -665,14 +640,6 @@ failed:
return -ENODEV;
} /* pcnet_config */
-/*======================================================================
-
- After a card is removed, pcnet_release() will unregister the net
- device, and release the PCMCIA configuration. If the device is
- still open, this will be postponed until it is closed.
-
-======================================================================*/
-
static void pcnet_release(struct pcmcia_device *link)
{
pcnet_dev_t *info = PRIV(link->priv);
@@ -685,15 +652,6 @@ static void pcnet_release(struct pcmcia_device *link)
pcmcia_disable_device(link);
}
-/*======================================================================
-
- The card status event handler. Mostly, this schedules other
- stuff to run after an event is received. A CARD_REMOVAL event
- also sets some flags to discourage the net drivers from trying
- to talk to the card any more.
-
-======================================================================*/
-
static int pcnet_suspend(struct pcmcia_device *link)
{
struct net_device *dev = link->priv;
diff --git a/drivers/net/pcmcia/smc91c92_cs.c b/drivers/net/pcmcia/smc91c92_cs.c
index e4c4fb626572..0af2fc8ec164 100644
--- a/drivers/net/pcmcia/smc91c92_cs.c
+++ b/drivers/net/pcmcia/smc91c92_cs.c
@@ -299,14 +299,6 @@ static const struct net_device_ops smc_netdev_ops = {
.ndo_validate_addr = eth_validate_addr,
};
-/*======================================================================
-
- smc91c92_attach() creates an "instance" of the driver, allocating
- local data structures for one device. The device is registered
- with Card Services.
-
-======================================================================*/
-
static int smc91c92_probe(struct pcmcia_device *link)
{
struct smc_private *smc;
@@ -338,15 +330,6 @@ static int smc91c92_probe(struct pcmcia_device *link)
return smc91c92_config(link);
} /* smc91c92_attach */
-/*======================================================================
-
- This deletes a driver "instance". The device is de-registered
- with Card Services. If it has been released, all local data
- structures are freed. Otherwise, the structures will be freed
- when the device is released.
-
-======================================================================*/
-
static void smc91c92_detach(struct pcmcia_device *link)
{
struct net_device *dev = link->priv;
@@ -819,14 +802,6 @@ static int check_sig(struct pcmcia_device *link)
return -ENODEV;
}
-/*======================================================================
-
- smc91c92_config() is scheduled to run after a CARD_INSERTION event
- is received, to configure the PCMCIA socket, and to make the
- ethernet device available to the system.
-
-======================================================================*/
-
static int smc91c92_config(struct pcmcia_device *link)
{
struct net_device *dev = link->priv;
@@ -977,14 +952,6 @@ config_failed:
return -ENODEV;
} /* smc91c92_config */
-/*======================================================================
-
- After a card is removed, smc91c92_release() will unregister the net
- device, and release the PCMCIA configuration. If the device is
- still open, this will be postponed until it is closed.
-
-======================================================================*/
-
static void smc91c92_release(struct pcmcia_device *link)
{
dev_dbg(&link->dev, "smc91c92_release\n");
diff --git a/drivers/net/pcmcia/xirc2ps_cs.c b/drivers/net/pcmcia/xirc2ps_cs.c
index 18cdc84a84bf..1fece617c069 100644
--- a/drivers/net/pcmcia/xirc2ps_cs.c
+++ b/drivers/net/pcmcia/xirc2ps_cs.c
@@ -266,33 +266,11 @@ static unsigned mii_rd(unsigned int ioaddr, u_char phyaddr, u_char phyreg);
static void mii_wr(unsigned int ioaddr, u_char phyaddr, u_char phyreg,
unsigned data, int len);
-/*
- * The event() function is this driver's Card Services event handler.
- * It will be called by Card Services when an appropriate card status
- * event is received. The config() and release() entry points are
- * used to configure or release a socket, in response to card insertion
- * and ejection events. They are invoked from the event handler.
- */
-
static int has_ce2_string(struct pcmcia_device * link);
static int xirc2ps_config(struct pcmcia_device * link);
static void xirc2ps_release(struct pcmcia_device * link);
-
-/****************
- * The attach() and detach() entry points are used to create and destroy
- * "instances" of the driver, where each instance represents everything
- * needed to manage one actual PCMCIA card.
- */
-
static void xirc2ps_detach(struct pcmcia_device *p_dev);
-/****************
- * You'll also need to prototype all the functions that will actually
- * be used to talk to your device. See 'pcmem_cs' for a good example
- * of a fully self-sufficient driver; the other drivers rely more or
- * less on other parts of the kernel.
- */
-
static irqreturn_t xirc2ps_interrupt(int irq, void *dev_id);
typedef struct local_info_t {
@@ -500,16 +478,6 @@ static const struct net_device_ops netdev_ops = {
.ndo_validate_addr = eth_validate_addr,
};
-/****************
- * xirc2ps_attach() creates an "instance" of the driver, allocating
- * local data structures for one device. The device is registered
- * with Card Services.
- *
- * The dev_link structure is initialized, but we don't actually
- * configure the card at this point -- we wait until we receive a
- * card insertion event.
- */
-
static int
xirc2ps_probe(struct pcmcia_device *link)
{
@@ -539,13 +507,6 @@ xirc2ps_probe(struct pcmcia_device *link)
return xirc2ps_config(link);
} /* xirc2ps_attach */
-/****************
- * This deletes a driver "instance". The device is de-registered
- * with Card Services. If it has been released, all local data
- * structures are freed. Otherwise, the structures will be freed
- * when the device is released.
- */
-
static void
xirc2ps_detach(struct pcmcia_device *link)
{
@@ -733,11 +694,6 @@ static int pcmcia_get_mac_ce(struct pcmcia_device *p_dev,
};
-/****************
- * xirc2ps_config() is scheduled to run after a CARD_INSERTION event
- * is received, to configure the PCMCIA socket, and to make the
- * ethernet device available to the system.
- */
static int
xirc2ps_config(struct pcmcia_device * link)
{
@@ -861,10 +817,6 @@ xirc2ps_config(struct pcmcia_device * link)
if ((err=pcmcia_request_irq(link, xirc2ps_interrupt)))
goto config_error;
- /****************
- * This actually configures the PCMCIA socket -- setting up
- * the I/O windows and the interrupt mapping.
- */
link->config_flags |= CONF_ENABLE_IRQ;
if (do_sound)
link->config_flags |= CONF_ENABLE_SPKR;
@@ -980,11 +932,6 @@ xirc2ps_config(struct pcmcia_device * link)
return -ENODEV;
} /* xirc2ps_config */
-/****************
- * After a card is removed, xirc2ps_release() will unregister the net
- * device, and release the PCMCIA configuration. If the device is
- * still open, this will be postponed until it is closed.
- */
static void
xirc2ps_release(struct pcmcia_device *link)
{
diff --git a/drivers/net/wireless/airo_cs.c b/drivers/net/wireless/airo_cs.c
index b084278f36b7..df2484d45474 100644
--- a/drivers/net/wireless/airo_cs.c
+++ b/drivers/net/wireless/airo_cs.c
@@ -53,42 +53,15 @@ MODULE_SUPPORTED_DEVICE("Aironet 4500, 4800 and Cisco 340 PCMCIA cards");
/*====================================================================*/
-/*
- The event() function is this driver's Card Services event handler.
- It will be called by Card Services when an appropriate card status
- event is received. The config() and release() entry points are
- used to configure or release a socket, in response to card
- insertion and ejection events. They are invoked from the airo_cs
- event handler.
-*/
-
static int airo_config(struct pcmcia_device *link);
static void airo_release(struct pcmcia_device *link);
-/*
- The attach() and detach() entry points are used to create and destroy
- "instances" of the driver, where each instance represents everything
- needed to manage one actual PCMCIA card.
-*/
-
static void airo_detach(struct pcmcia_device *p_dev);
typedef struct local_info_t {
struct net_device *eth_dev;
} local_info_t;
-/*======================================================================
-
- airo_attach() creates an "instance" of the driver, allocating
- local data structures for one device. The device is registered
- with Card Services.
-
- The dev_link structure is initialized, but we don't actually
- configure the card at this point -- we wait until we receive a
- card insertion event.
-
- ======================================================================*/
-
static int airo_probe(struct pcmcia_device *p_dev)
{
local_info_t *local;
@@ -106,15 +79,6 @@ static int airo_probe(struct pcmcia_device *p_dev)
return airo_config(p_dev);
} /* airo_attach */
-/*======================================================================
-
- This deletes a driver "instance". The device is de-registered
- with Card Services. If it has been released, all local data
- structures are freed. Otherwise, the structures will be freed
- when the device is released.
-
- ======================================================================*/
-
static void airo_detach(struct pcmcia_device *link)
{
dev_dbg(&link->dev, "airo_detach\n");
@@ -129,14 +93,6 @@ static void airo_detach(struct pcmcia_device *link)
kfree(link->priv);
} /* airo_detach */
-/*======================================================================
-
- airo_config() is scheduled to run after a CARD_INSERTION event
- is received, to configure the PCMCIA socket, and to make the
- device available to the system.
-
- ======================================================================*/
-
static int airo_cs_config_check(struct pcmcia_device *p_dev, void *priv_data)
{
if (p_dev->config_index == 0)
@@ -158,20 +114,6 @@ static int airo_config(struct pcmcia_device *link)
link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_VPP |
CONF_AUTO_AUDIO | CONF_AUTO_SET_IO;
- /*
- * In this loop, we scan the CIS for configuration table
- * entries, each of which describes a valid card
- * configuration, including voltage, IO window, memory window,
- * and interrupt settings.
- *
- * We make no assumptions about the card to be configured: we
- * use just the information available in the CIS. In an ideal
- * world, this would work for any PCMCIA card, but it requires
- * a complete and accurate CIS. In practice, a driver usually
- * "knows" most of these things without consulting the CIS,
- * and most client drivers will only use the CIS to fill in
- * implementation-defined details.
- */
ret = pcmcia_loop_config(link, airo_cs_config_check, NULL);
if (ret)
goto failed;
@@ -179,11 +121,6 @@ static int airo_config(struct pcmcia_device *link)
if (!link->irq)
goto failed;
- /*
- This actually configures the PCMCIA socket -- setting up
- the I/O windows and the interrupt mapping, and putting the
- card and host interface into "Memory and IO" mode.
- */
ret = pcmcia_enable_device(link);
if (ret)
goto failed;
@@ -200,14 +137,6 @@ static int airo_config(struct pcmcia_device *link)
return -ENODEV;
} /* airo_config */
-/*======================================================================
-
- After a card is removed, airo_release() will unregister the
- device, and release the PCMCIA configuration. If the device is
- still open, this will be postponed until it is closed.
-
- ======================================================================*/
-
static void airo_release(struct pcmcia_device *link)
{
dev_dbg(&link->dev, "airo_release\n");
diff --git a/drivers/net/wireless/atmel_cs.c b/drivers/net/wireless/atmel_cs.c
index fabe91a8db2b..c96e19da2949 100644
--- a/drivers/net/wireless/atmel_cs.c
+++ b/drivers/net/wireless/atmel_cs.c
@@ -63,42 +63,15 @@ MODULE_SUPPORTED_DEVICE("Atmel at76c50x PCMCIA cards");
/*====================================================================*/
-/*
- The event() function is this driver's Card Services event handler.
- It will be called by Card Services when an appropriate card status
- event is received. The config() and release() entry points are
- used to configure or release a socket, in response to card
- insertion and ejection events. They are invoked from the atmel_cs
- event handler.
-*/
-
static int atmel_config(struct pcmcia_device *link);
static void atmel_release(struct pcmcia_device *link);
-/*
- The attach() and detach() entry points are used to create and destroy
- "instances" of the driver, where each instance represents everything
- needed to manage one actual PCMCIA card.
-*/
-
static void atmel_detach(struct pcmcia_device *p_dev);
typedef struct local_info_t {
struct net_device *eth_dev;
} local_info_t;
-/*======================================================================
-
- atmel_attach() creates an "instance" of the driver, allocating
- local data structures for one device. The device is registered
- with Card Services.
-
- The dev_link structure is initialized, but we don't actually
- configure the card at this point -- we wait until we receive a
- card insertion event.
-
- ======================================================================*/
-
static int atmel_probe(struct pcmcia_device *p_dev)
{
local_info_t *local;
@@ -116,15 +89,6 @@ static int atmel_probe(struct pcmcia_device *p_dev)
return atmel_config(p_dev);
} /* atmel_attach */
-/*======================================================================
-
- This deletes a driver "instance". The device is de-registered
- with Card Services. If it has been released, all local data
- structures are freed. Otherwise, the structures will be freed
- when the device is released.
-
- ======================================================================*/
-
static void atmel_detach(struct pcmcia_device *link)
{
dev_dbg(&link->dev, "atmel_detach\n");
@@ -134,14 +98,6 @@ static void atmel_detach(struct pcmcia_device *link)
kfree(link->priv);
}
-/*======================================================================
-
- atmel_config() is scheduled to run after a CARD_INSERTION event
- is received, to configure the PCMCIA socket, and to make the
- device available to the system.
-
- ======================================================================*/
-
/* Call-back function to interrogate PCMCIA-specific information
about the current existance of the card */
static int card_present(void *arg)
@@ -176,18 +132,6 @@ static int atmel_config(struct pcmcia_device *link)
link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_VPP |
CONF_AUTO_AUDIO | CONF_AUTO_SET_IO;
- /*
- In this loop, we scan the CIS for configuration table entries,
- each of which describes a valid card configuration, including
- voltage, IO window, memory window, and interrupt settings.
-
- We make no assumptions about the card to be configured: we use
- just the information available in the CIS. In an ideal world,
- this would work for any PCMCIA card, but it requires a complete
- and accurate CIS. In practice, a driver usually "knows" most of
- these things without consulting the CIS, and most client drivers
- will only use the CIS to fill in implementation-defined details.
- */
if (pcmcia_loop_config(link, atmel_config_check, NULL))
goto failed;
@@ -196,11 +140,6 @@ static int atmel_config(struct pcmcia_device *link)
goto failed;
}
- /*
- This actually configures the PCMCIA socket -- setting up
- the I/O windows and the interrupt mapping, and putting the
- card and host interface into "Memory and IO" mode.
- */
ret = pcmcia_enable_device(link);
if (ret)
goto failed;
@@ -223,14 +162,6 @@ static int atmel_config(struct pcmcia_device *link)
return -ENODEV;
}
-/*======================================================================
-
- After a card is removed, atmel_release() will unregister the
- device, and release the PCMCIA configuration. If the device is
- still open, this will be postponed until it is closed.
-
- ======================================================================*/
-
static void atmel_release(struct pcmcia_device *link)
{
struct net_device *dev = ((local_info_t*)link->priv)->eth_dev;
diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c
index ba645701179a..bd8a4134edeb 100644
--- a/drivers/net/wireless/hostap/hostap_cs.c
+++ b/drivers/net/wireless/hostap/hostap_cs.c
@@ -466,9 +466,6 @@ static void prism2_detach(struct pcmcia_device *link)
}
-/* run after a CARD_INSERTION event is received to configure the PCMCIA
- * socket and make the device available to the system */
-
static int prism2_config_check(struct pcmcia_device *p_dev, void *priv_data)
{
if (p_dev->config_index == 0)
@@ -530,11 +527,6 @@ static int prism2_config(struct pcmcia_device *link)
if (ret)
goto failed_unlock;
- /*
- * This actually configures the PCMCIA socket -- setting up
- * the I/O windows and the interrupt mapping, and putting the
- * card and host interface into "Memory and IO" mode.
- */
ret = pcmcia_enable_device(link);
if (ret)
goto failed_unlock;
diff --git a/drivers/net/wireless/libertas/if_cs.c b/drivers/net/wireless/libertas/if_cs.c
index c2bd2f0304bb..ff1280f41336 100644
--- a/drivers/net/wireless/libertas/if_cs.c
+++ b/drivers/net/wireless/libertas/if_cs.c
@@ -760,15 +760,6 @@ static int if_cs_host_to_card(struct lbs_private *priv,
}
-/********************************************************************/
-/* Card Services */
-/********************************************************************/
-
-/*
- * After a card is removed, if_cs_release() will unregister the
- * device, and release the PCMCIA configuration. If the device is
- * still open, this will be postponed until it is closed.
- */
static void if_cs_release(struct pcmcia_device *p_dev)
{
struct if_cs_card *card = p_dev->priv;
@@ -784,16 +775,6 @@ static void if_cs_release(struct pcmcia_device *p_dev)
}
-/*
- * This creates an "instance" of the driver, allocating local data
- * structures for one device. The device is registered with Card
- * Services.
- *
- * The dev_link structure is initialized, but we don't actually
- * configure the card at this point -- we wait until we receive a card
- * insertion event.
- */
-
static int if_cs_ioprobe(struct pcmcia_device *p_dev, void *priv_data)
{
p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
@@ -849,11 +830,6 @@ static int if_cs_probe(struct pcmcia_device *p_dev)
goto out1;
}
- /*
- * This actually configures the PCMCIA socket -- setting up
- * the I/O windows and the interrupt mapping, and putting the
- * card and host interface into "Memory and IO" mode.
- */
ret = pcmcia_enable_device(p_dev);
if (ret) {
lbs_pr_err("error in pcmcia_enable_device\n");
@@ -950,12 +926,6 @@ out:
}
-/*
- * This deletes a driver "instance". The device is de-registered with
- * Card Services. If it has been released, all local data structures
- * are freed. Otherwise, the structures will be freed when the device
- * is released.
- */
static void if_cs_detach(struct pcmcia_device *p_dev)
{
struct if_cs_card *card = p_dev->priv;
diff --git a/drivers/net/wireless/orinoco/orinoco_cs.c b/drivers/net/wireless/orinoco/orinoco_cs.c
index 2b1f554af0b2..71b3d68b9403 100644
--- a/drivers/net/wireless/orinoco/orinoco_cs.c
+++ b/drivers/net/wireless/orinoco/orinoco_cs.c
@@ -92,14 +92,6 @@ orinoco_cs_hard_reset(struct orinoco_private *priv)
/* PCMCIA stuff */
/********************************************************************/
-/*
- * This creates an "instance" of the driver, allocating local data
- * structures for one device. The device is registered with Card
- * Services.
- *
- * The dev_link structure is initialized, but we don't actually
- * configure the card at this point -- we wait until we receive a card
- * insertion event. */
static int
orinoco_cs_probe(struct pcmcia_device *link)
{
@@ -119,12 +111,6 @@ orinoco_cs_probe(struct pcmcia_device *link)
return orinoco_cs_config(link);
} /* orinoco_cs_attach */
-/*
- * This deletes a driver "instance". The device is de-registered with
- * Card Services. If it has been released, all local data structures
- * are freed. Otherwise, the structures will be freed when the device
- * is released.
- */
static void orinoco_cs_detach(struct pcmcia_device *link)
{
struct orinoco_private *priv = link->priv;
@@ -136,12 +122,6 @@ static void orinoco_cs_detach(struct pcmcia_device *link)
free_orinocodev(priv);
} /* orinoco_cs_detach */
-/*
- * orinoco_cs_config() is scheduled to run after a CARD_INSERTION
- * event is received, to configure the PCMCIA socket, and to make the
- * device available to the system.
- */
-
static int orinoco_cs_config_check(struct pcmcia_device *p_dev, void *priv_data)
{
if (p_dev->config_index == 0)
@@ -158,20 +138,6 @@ orinoco_cs_config(struct pcmcia_device *link)
int ret;
void __iomem *mem;
- /*
- * In this loop, we scan the CIS for configuration table
- * entries, each of which describes a valid card
- * configuration, including voltage, IO window, memory window,
- * and interrupt settings.
- *
- * We make no assumptions about the card to be configured: we
- * use just the information available in the CIS. In an ideal
- * world, this would work for any PCMCIA card, but it requires
- * a complete and accurate CIS. In practice, a driver usually
- * "knows" most of these things without consulting the CIS,
- * and most client drivers will only use the CIS to fill in
- * implementation-defined details.
- */
link->config_flags |= CONF_AUTO_SET_VPP | CONF_AUTO_CHECK_VCC |
CONF_AUTO_SET_IO | CONF_ENABLE_IRQ;
if (ignore_cis_vcc)
@@ -199,11 +165,6 @@ orinoco_cs_config(struct pcmcia_device *link)
hermes_struct_init(hw, mem, HERMES_16BIT_REGSPACING);
- /*
- * This actually configures the PCMCIA socket -- setting up
- * the I/O windows and the interrupt mapping, and putting the
- * card and host interface into "Memory and IO" mode.
- */
ret = pcmcia_enable_device(link);
if (ret)
goto failed;
@@ -228,11 +189,6 @@ orinoco_cs_config(struct pcmcia_device *link)
return -ENODEV;
} /* orinoco_cs_config */
-/*
- * After a card is removed, orinoco_cs_release() will unregister the
- * device, and release the PCMCIA configuration. If the device is
- * still open, this will be postponed until it is closed.
- */
static void
orinoco_cs_release(struct pcmcia_device *link)
{
diff --git a/drivers/net/wireless/orinoco/spectrum_cs.c b/drivers/net/wireless/orinoco/spectrum_cs.c
index 1314cf204f12..fb859a5ad2eb 100644
--- a/drivers/net/wireless/orinoco/spectrum_cs.c
+++ b/drivers/net/wireless/orinoco/spectrum_cs.c
@@ -153,14 +153,6 @@ spectrum_cs_stop_firmware(struct orinoco_private *priv, int idle)
/* PCMCIA stuff */
/********************************************************************/
-/*
- * This creates an "instance" of the driver, allocating local data
- * structures for one device. The device is registered with Card
- * Services.
- *
- * The dev_link structure is initialized, but we don't actually
- * configure the card at this point -- we wait until we receive a card
- * insertion event. */
static int
spectrum_cs_probe(struct pcmcia_device *link)
{
@@ -181,12 +173,6 @@ spectrum_cs_probe(struct pcmcia_device *link)
return spectrum_cs_config(link);
} /* spectrum_cs_attach */
-/*
- * This deletes a driver "instance". The device is de-registered with
- * Card Services. If it has been released, all local data structures
- * are freed. Otherwise, the structures will be freed when the device
- * is released.
- */
static void spectrum_cs_detach(struct pcmcia_device *link)
{
struct orinoco_private *priv = link->priv;
@@ -198,12 +184,6 @@ static void spectrum_cs_detach(struct pcmcia_device *link)
free_orinocodev(priv);
} /* spectrum_cs_detach */
-/*
- * spectrum_cs_config() is scheduled to run after a CARD_INSERTION
- * event is received, to configure the PCMCIA socket, and to make the
- * device available to the system.
- */
-
static int spectrum_cs_config_check(struct pcmcia_device *p_dev,
void *priv_data)
{
@@ -221,20 +201,6 @@ spectrum_cs_config(struct pcmcia_device *link)
int ret;
void __iomem *mem;
- /*
- * In this loop, we scan the CIS for configuration table
- * entries, each of which describes a valid card
- * configuration, including voltage, IO window, memory window,
- * and interrupt settings.
- *
- * We make no assumptions about the card to be configured: we
- * use just the information available in the CIS. In an ideal
- * world, this would work for any PCMCIA card, but it requires
- * a complete and accurate CIS. In practice, a driver usually
- * "knows" most of these things without consulting the CIS,
- * and most client drivers will only use the CIS to fill in
- * implementation-defined details.
- */
link->config_flags |= CONF_AUTO_SET_VPP | CONF_AUTO_CHECK_VCC |
CONF_AUTO_SET_IO | CONF_ENABLE_IRQ;
if (ignore_cis_vcc)
@@ -263,11 +229,6 @@ spectrum_cs_config(struct pcmcia_device *link)
hermes_struct_init(hw, mem, HERMES_16BIT_REGSPACING);
hw->eeprom_pda = true;
- /*
- * This actually configures the PCMCIA socket -- setting up
- * the I/O windows and the interrupt mapping, and putting the
- * card and host interface into "Memory and IO" mode.
- */
ret = pcmcia_enable_device(link);
if (ret)
goto failed;
@@ -296,11 +257,6 @@ spectrum_cs_config(struct pcmcia_device *link)
return -ENODEV;
} /* spectrum_cs_config */
-/*
- * After a card is removed, spectrum_cs_release() will unregister the
- * device, and release the PCMCIA configuration. If the device is
- * still open, this will be postponed until it is closed.
- */
static void
spectrum_cs_release(struct pcmcia_device *link)
{
diff --git a/drivers/net/wireless/ray_cs.c b/drivers/net/wireless/ray_cs.c
index b5a2c9e31de2..af5b17ce5a15 100644
--- a/drivers/net/wireless/ray_cs.c
+++ b/drivers/net/wireless/ray_cs.c
@@ -168,13 +168,6 @@ static int bc;
*/
static char *phy_addr = NULL;
-
-/* A struct pcmcia_device structure has fields for most things that are needed
- to keep track of a socket, but there will usually be some device
- specific information that also needs to be kept track of. The
- 'priv' pointer in a struct pcmcia_device structure can be used to point to
- a device-specific private data structure, like this.
-*/
static unsigned int ray_mem_speed = 500;
/* WARNING: THIS DRIVER IS NOT CAPABLE OF HANDLING MULTIPLE DEVICES! */
@@ -289,14 +282,6 @@ static const struct net_device_ops ray_netdev_ops = {
.ndo_validate_addr = eth_validate_addr,
};
-/*=============================================================================
- ray_attach() creates an "instance" of the driver, allocating
- local data structures for one device. The device is registered
- with Card Services.
- The dev_link structure is initialized, but we don't actually
- configure the card at this point -- we wait until we receive a
- card insertion event.
-=============================================================================*/
static int ray_probe(struct pcmcia_device *p_dev)
{
ray_dev_t *local;
@@ -351,12 +336,6 @@ fail_alloc_dev:
return -ENOMEM;
} /* ray_attach */
-/*=============================================================================
- This deletes a driver "instance". The device is de-registered
- with Card Services. If it has been released, all local data
- structures are freed. Otherwise, the structures will be freed
- when the device is released.
-=============================================================================*/
static void ray_detach(struct pcmcia_device *link)
{
struct net_device *dev;
@@ -379,11 +358,6 @@ static void ray_detach(struct pcmcia_device *link)
dev_dbg(&link->dev, "ray_cs ray_detach ending\n");
} /* ray_detach */
-/*=============================================================================
- ray_config() is run after a CARD_INSERTION event
- is received, to configure the PCMCIA socket, and to make the
- ethernet device available to the system.
-=============================================================================*/
#define MAX_TUPLE_SIZE 128
static int ray_config(struct pcmcia_device *link)
{
@@ -409,9 +383,6 @@ static int ray_config(struct pcmcia_device *link)
goto failed;
dev->irq = link->irq;
- /* This actually configures the PCMCIA socket -- setting up
- the I/O windows and the interrupt mapping.
- */
ret = pcmcia_enable_device(link);
if (ret)
goto failed;
@@ -771,11 +742,7 @@ static void join_net(u_long data)
local->card_status = CARD_DOING_ACQ;
}
-/*============================================================================
- After a card is removed, ray_release() will unregister the net
- device, and release the PCMCIA configuration. If the device is
- still open, this will be postponed until it is closed.
-=============================================================================*/
+
static void ray_release(struct pcmcia_device *link)
{
struct net_device *dev = link->priv;
diff --git a/drivers/net/wireless/wl3501_cs.c b/drivers/net/wireless/wl3501_cs.c
index d3ed38f558fa..ca3f8961fa27 100644
--- a/drivers/net/wireless/wl3501_cs.c
+++ b/drivers/net/wireless/wl3501_cs.c
@@ -77,13 +77,6 @@
#define WL3501_RESUME 0
#define WL3501_SUSPEND 1
-/*
- * The event() function is this driver's Card Services event handler. It will
- * be called by Card Services when an appropriate card status event is
- * received. The config() and release() entry points are used to configure or
- * release a socket, in response to card insertion and ejection events. They
- * are invoked from the wl24 event handler.
- */
static int wl3501_config(struct pcmcia_device *link);
static void wl3501_release(struct pcmcia_device *link);
@@ -1868,15 +1861,6 @@ static const struct net_device_ops wl3501_netdev_ops = {
.ndo_validate_addr = eth_validate_addr,
};
-/**
- * wl3501_attach - creates an "instance" of the driver
- *
- * Creates an "instance" of the driver, allocating local data structures for
- * one device. The device is registered with Card Services.
- *
- * The dev_link structure is initialized, but we don't actually configure the
- * card at this point -- we wait until we receive a card insertion event.
- */
static int wl3501_probe(struct pcmcia_device *p_dev)
{
struct net_device *dev;
@@ -1912,14 +1896,6 @@ out_link:
return -ENOMEM;
}
-/**
- * wl3501_config - configure the PCMCIA socket and make eth device available
- * @link - FILL_IN
- *
- * wl3501_config() is scheduled to run after a CARD_INSERTION event is
- * received, to configure the PCMCIA socket, and to make the ethernet device
- * available to the system.
- */
static int wl3501_config(struct pcmcia_device *link)
{
struct net_device *dev = link->priv;
@@ -1950,9 +1926,6 @@ static int wl3501_config(struct pcmcia_device *link)
if (ret)
goto failed;
- /* This actually configures the PCMCIA socket -- setting up the I/O
- * windows and the interrupt mapping. */
-
ret = pcmcia_enable_device(link);
if (ret)
goto failed;
@@ -2008,14 +1981,6 @@ failed:
return -ENODEV;
}
-/**
- * wl3501_release - unregister the net, release PCMCIA configuration
- * @arg - link
- *
- * After a card is removed, wl3501_release() will unregister the net device,
- * and release the PCMCIA configuration. If the device is still open, this
- * will be postponed until it is closed.
- */
static void wl3501_release(struct pcmcia_device *link)
{
pcmcia_disable_device(link);
diff --git a/drivers/parport/parport_cs.c b/drivers/parport/parport_cs.c
index 6f4c9560b2b9..787ebdeae310 100644
--- a/drivers/parport/parport_cs.c
+++ b/drivers/parport/parport_cs.c
@@ -80,14 +80,6 @@ static void parport_detach(struct pcmcia_device *p_dev);
static int parport_config(struct pcmcia_device *link);
static void parport_cs_release(struct pcmcia_device *);
-/*======================================================================
-
- parport_attach() creates an "instance" of the driver, allocating
- local data structures for one device. The device is registered
- with Card Services.
-
-======================================================================*/
-
static int parport_probe(struct pcmcia_device *link)
{
parport_info_t *info;
@@ -105,15 +97,6 @@ static int parport_probe(struct pcmcia_device *link)
return parport_config(link);
} /* parport_attach */
-/*======================================================================
-
- This deletes a driver "instance". The device is de-registered
- with Card Services. If it has been released, all local data
- structures are freed. Otherwise, the structures will be freed
- when the device is released.
-
-======================================================================*/
-
static void parport_detach(struct pcmcia_device *link)
{
dev_dbg(&link->dev, "parport_detach\n");
@@ -123,14 +106,6 @@ static void parport_detach(struct pcmcia_device *link)
kfree(link->priv);
} /* parport_detach */
-/*======================================================================
-
- parport_config() is scheduled to run after a CARD_INSERTION event
- is received, to configure the PCMCIA socket, and to make the
- parport device available to the system.
-
-======================================================================*/
-
static int parport_config_check(struct pcmcia_device *p_dev, void *priv_data)
{
p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
@@ -187,14 +162,6 @@ failed:
return -ENODEV;
} /* parport_config */
-/*======================================================================
-
- After a card is removed, parport_cs_release() will unregister the
- device, and release the PCMCIA configuration. If the device is
- still open, this will be postponed until it is closed.
-
-======================================================================*/
-
static void parport_cs_release(struct pcmcia_device *link)
{
parport_info_t *info = link->priv;
diff --git a/drivers/scsi/pcmcia/nsp_cs.c b/drivers/scsi/pcmcia/nsp_cs.c
index 07b73ca2a7e0..9326c2c14880 100644
--- a/drivers/scsi/pcmcia/nsp_cs.c
+++ b/drivers/scsi/pcmcia/nsp_cs.c
@@ -1530,15 +1530,6 @@ static int nsp_eh_host_reset(struct scsi_cmnd *SCpnt)
PCMCIA functions
**********************************************************************/
-/*======================================================================
- nsp_cs_attach() creates an "instance" of the driver, allocating
- local data structures for one device. The device is registered
- with Card Services.
-
- The dev_link structure is initialized, but we don't actually
- configure the card at this point -- we wait until we receive a
- card insertion event.
-======================================================================*/
static int nsp_cs_probe(struct pcmcia_device *link)
{
scsi_info_t *info;
@@ -1563,12 +1554,6 @@ static int nsp_cs_probe(struct pcmcia_device *link)
} /* nsp_cs_attach */
-/*======================================================================
- This deletes a driver "instance". The device is de-registered
- with Card Services. If it has been released, all local data
- structures are freed. Otherwise, the structures will be freed
- when the device is released.
-======================================================================*/
static void nsp_cs_detach(struct pcmcia_device *link)
{
nsp_dbg(NSP_DEBUG_INIT, "in, link=0x%p", link);
@@ -1581,12 +1566,6 @@ static void nsp_cs_detach(struct pcmcia_device *link)
} /* nsp_cs_detach */
-/*======================================================================
- nsp_cs_config() is scheduled to run after a CARD_INSERTION event
- is received, to configure the PCMCIA socket, and to make the
- ethernet device available to the system.
-======================================================================*/
-
static int nsp_cs_config_check(struct pcmcia_device *p_dev, void *priv_data)
{
nsp_hw_data *data = priv_data;
@@ -1697,11 +1676,6 @@ static int nsp_cs_config(struct pcmcia_device *link)
} /* nsp_cs_config */
-/*======================================================================
- After a card is removed, nsp_cs_release() will unregister the net
- device, and release the PCMCIA configuration. If the device is
- still open, this will be postponed until it is closed.
-======================================================================*/
static void nsp_cs_release(struct pcmcia_device *link)
{
scsi_info_t *info = link->priv;
diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c
index 5047224d2625..649ce543327b 100644
--- a/drivers/serial/serial_cs.c
+++ b/drivers/serial/serial_cs.c
@@ -262,13 +262,6 @@ static const struct serial_quirk quirks[] = {
static int serial_config(struct pcmcia_device * link);
-/*======================================================================
-
- After a card is removed, serial_remove() will unregister
- the serial device(s), and release the PCMCIA configuration.
-
-======================================================================*/
-
static void serial_remove(struct pcmcia_device *link)
{
struct serial_info *info = link->priv;
@@ -311,14 +304,6 @@ static int serial_resume(struct pcmcia_device *link)
return 0;
}
-/*======================================================================
-
- serial_attach() creates an "instance" of the driver, allocating
- local data structures for one device. The device is registered
- with Card Services.
-
-======================================================================*/
-
static int serial_probe(struct pcmcia_device *link)
{
struct serial_info *info;
@@ -339,15 +324,6 @@ static int serial_probe(struct pcmcia_device *link)
return serial_config(link);
}
-/*======================================================================
-
- This deletes a driver "instance". The device is de-registered
- with Card Services. If it has been released, all local data
- structures are freed. Otherwise, the structures will be freed
- when the device is released.
-
-======================================================================*/
-
static void serial_detach(struct pcmcia_device *link)
{
struct serial_info *info = link->priv;
@@ -631,14 +607,6 @@ static int serial_check_for_multi(struct pcmcia_device *p_dev, void *priv_data)
}
-/*======================================================================
-
- serial_config() is scheduled to run after a CARD_INSERTION event
- is received, to configure the PCMCIA socket, and to make the
- serial device available to the system.
-
-======================================================================*/
-
static int serial_config(struct pcmcia_device * link)
{
struct serial_info *info = link->priv;
diff --git a/drivers/staging/comedi/drivers/cb_das16_cs.c b/drivers/staging/comedi/drivers/cb_das16_cs.c
index a885cd7cfd7f..0345b4caba73 100644
--- a/drivers/staging/comedi/drivers/cb_das16_cs.c
+++ b/drivers/staging/comedi/drivers/cb_das16_cs.c
@@ -736,11 +736,6 @@ static void das16cs_pcmcia_config(struct pcmcia_device *link)
if (!link->irq)
goto failed;
- /*
- This actually configures the PCMCIA socket -- setting up
- the I/O windows and the interrupt mapping, and putting the
- card and host interface into "Memory and IO" mode.
- */
ret = pcmcia_enable_device(link);
if (ret)
goto failed;
diff --git a/drivers/staging/comedi/drivers/das08_cs.c b/drivers/staging/comedi/drivers/das08_cs.c
index def167eac1d8..0b32a2df7768 100644
--- a/drivers/staging/comedi/drivers/das08_cs.c
+++ b/drivers/staging/comedi/drivers/das08_cs.c
@@ -114,40 +114,15 @@ static void das08_pcmcia_release(struct pcmcia_device *link);
static int das08_pcmcia_suspend(struct pcmcia_device *p_dev);
static int das08_pcmcia_resume(struct pcmcia_device *p_dev);
-/*
- The attach() and detach() entry points are used to create and destroy
- "instances" of the driver, where each instance represents everything
- needed to manage one actual PCMCIA card.
-*/
-
static int das08_pcmcia_attach(struct pcmcia_device *);
static void das08_pcmcia_detach(struct pcmcia_device *);
-/*
- You'll also need to prototype all the functions that will actually
- be used to talk to your device. See 'memory_cs' for a good example
- of a fully self-sufficient driver; the other drivers rely more or
- less on other parts of the kernel.
-*/
-
struct local_info_t {
struct pcmcia_device *link;
int stop;
struct bus_operations *bus;
};
-/*======================================================================
-
- das08_pcmcia_attach() creates an "instance" of the driver, allocating
- local data structures for one device. The device is registered
- with Card Services.
-
- The dev_link structure is initialized, but we don't actually
- configure the card at this point -- we wait until we receive a
- card insertion event.
-
-======================================================================*/
-
static int das08_pcmcia_attach(struct pcmcia_device *link)
{
struct local_info_t *local;
@@ -168,15 +143,6 @@ static int das08_pcmcia_attach(struct pcmcia_device *link)
return 0;
} /* das08_pcmcia_attach */
-/*======================================================================
-
- This deletes a driver "instance". The device is de-registered
- with Card Services. If it has been released, all local data
- structures are freed. Otherwise, the structures will be freed
- when the device is released.
-
-======================================================================*/
-
static void das08_pcmcia_detach(struct pcmcia_device *link)
{
@@ -200,15 +166,6 @@ static int das08_pcmcia_config_loop(struct pcmcia_device *p_dev,
return pcmcia_request_io(p_dev);
}
-
-/*======================================================================
-
- das08_pcmcia_config() is scheduled to run after a CARD_INSERTION event
- is received, to configure the PCMCIA socket, and to make the
- device available to the system.
-
-======================================================================*/
-
static void das08_pcmcia_config(struct pcmcia_device *link)
{
int ret;
@@ -226,11 +183,6 @@ static void das08_pcmcia_config(struct pcmcia_device *link)
if (!link->irq)
goto failed;
- /*
- This actually configures the PCMCIA socket -- setting up
- the I/O windows and the interrupt mapping, and putting the
- card and host interface into "Memory and IO" mode.
- */
ret = pcmcia_enable_device(link);
if (ret)
goto failed;
@@ -242,32 +194,12 @@ failed:
} /* das08_pcmcia_config */
-/*======================================================================
-
- After a card is removed, das08_pcmcia_release() will unregister the
- device, and release the PCMCIA configuration. If the device is
- still open, this will be postponed until it is closed.
-
-======================================================================*/
-
static void das08_pcmcia_release(struct pcmcia_device *link)
{
dev_dbg(&link->dev, "das08_pcmcia_release\n");
pcmcia_disable_device(link);
} /* das08_pcmcia_release */
-/*======================================================================
-
- The card status event handler. Mostly, this schedules other
- stuff to run after an event is received.
-
- When a CARD_REMOVAL event is received, we immediately set a
- private flag to block future accesses to this device. All the
- functions that actually access the device should check this flag
- to make sure the card is still present.
-
-======================================================================*/
-
static int das08_pcmcia_suspend(struct pcmcia_device *link)
{
struct local_info_t *local = link->priv;
diff --git a/drivers/staging/comedi/drivers/ni_daq_700.c b/drivers/staging/comedi/drivers/ni_daq_700.c
index 9cc8401765bd..fc772a8a55c6 100644
--- a/drivers/staging/comedi/drivers/ni_daq_700.c
+++ b/drivers/staging/comedi/drivers/ni_daq_700.c
@@ -434,47 +434,20 @@ static int dio700_detach(struct comedi_device *dev)
return 0;
};
-/* PCMCIA crap -- watch your words, please! */
-
static void dio700_config(struct pcmcia_device *link);
static void dio700_release(struct pcmcia_device *link);
static int dio700_cs_suspend(struct pcmcia_device *p_dev);
static int dio700_cs_resume(struct pcmcia_device *p_dev);
-/*
- The attach() and detach() entry points are used to create and destroy
- "instances" of the driver, where each instance represents everything
- needed to manage one actual PCMCIA card.
-*/
-
static int dio700_cs_attach(struct pcmcia_device *);
static void dio700_cs_detach(struct pcmcia_device *);
-/*
- You'll also need to prototype all the functions that will actually
- be used to talk to your device. See 'memory_cs' for a good example
- of a fully self-sufficient driver; the other drivers rely more or
- less on other parts of the kernel.
-*/
-
struct local_info_t {
struct pcmcia_device *link;
int stop;
struct bus_operations *bus;
};
-/*======================================================================
-
- dio700_cs_attach() creates an "instance" of the driver, allocating
- local data structures for one device. The device is registered
- with Card Services.
-
- The dev_link structure is initialized, but we don't actually
- configure the card at this point -- we wait until we receive a
- card insertion event.
-
-======================================================================*/
-
static int dio700_cs_attach(struct pcmcia_device *link)
{
struct local_info_t *local;
@@ -497,15 +470,6 @@ static int dio700_cs_attach(struct pcmcia_device *link)
return 0;
} /* dio700_cs_attach */
-/*======================================================================
-
- This deletes a driver "instance". The device is de-registered
- with Card Services. If it has been released, all local data
- structures are freed. Otherwise, the structures will be freed
- when the device is released.
-
-======================================================================*/
-
static void dio700_cs_detach(struct pcmcia_device *link)
{
@@ -521,14 +485,6 @@ static void dio700_cs_detach(struct pcmcia_device *link)
} /* dio700_cs_detach */
-/*======================================================================
-
- dio700_config() is scheduled to run after a CARD_INSERTION event
- is received, to configure the PCMCIA socket, and to make the
- device available to the system.
-
-======================================================================*/
-
static int dio700_pcmcia_config_loop(struct pcmcia_device *p_dev,
void *priv_data)
{
@@ -559,11 +515,6 @@ static void dio700_config(struct pcmcia_device *link)
if (!link->irq)
goto failed;
- /*
- This actually configures the PCMCIA socket -- setting up
- the I/O windows and the interrupt mapping, and putting the
- card and host interface into "Memory and IO" mode.
- */
ret = pcmcia_enable_device(link);
if (ret != 0)
goto failed;
@@ -583,18 +534,6 @@ static void dio700_release(struct pcmcia_device *link)
pcmcia_disable_device(link);
} /* dio700_release */
-/*======================================================================
-
- The card status event handler. Mostly, this schedules other
- stuff to run after an event is received.
-
- When a CARD_REMOVAL event is received, we immediately set a
- private flag to block future accesses to this device. All the
- functions that actually access the device should check this flag
- to make sure the card is still present.
-
-======================================================================*/
-
static int dio700_cs_suspend(struct pcmcia_device *link)
{
struct local_info_t *local = link->priv;
diff --git a/drivers/staging/comedi/drivers/ni_daq_dio24.c b/drivers/staging/comedi/drivers/ni_daq_dio24.c
index b3f7c66e25c2..c9c28584db67 100644
--- a/drivers/staging/comedi/drivers/ni_daq_dio24.c
+++ b/drivers/staging/comedi/drivers/ni_daq_dio24.c
@@ -186,47 +186,20 @@ static int dio24_detach(struct comedi_device *dev)
return 0;
};
-/* PCMCIA crap -- watch your words! */
-
static void dio24_config(struct pcmcia_device *link);
static void dio24_release(struct pcmcia_device *link);
static int dio24_cs_suspend(struct pcmcia_device *p_dev);
static int dio24_cs_resume(struct pcmcia_device *p_dev);
-/*
- The attach() and detach() entry points are used to create and destroy
- "instances" of the driver, where each instance represents everything
- needed to manage one actual PCMCIA card.
-*/
-
static int dio24_cs_attach(struct pcmcia_device *);
static void dio24_cs_detach(struct pcmcia_device *);
-/*
- You'll also need to prototype all the functions that will actually
- be used to talk to your device. See 'memory_cs' for a good example
- of a fully self-sufficient driver; the other drivers rely more or
- less on other parts of the kernel.
-*/
-
struct local_info_t {
struct pcmcia_device *link;
int stop;
struct bus_operations *bus;
};
-/*======================================================================
-
- dio24_cs_attach() creates an "instance" of the driver, allocating
- local data structures for one device. The device is registered
- with Card Services.
-
- The dev_link structure is initialized, but we don't actually
- configure the card at this point -- we wait until we receive a
- card insertion event.
-
-======================================================================*/
-
static int dio24_cs_attach(struct pcmcia_device *link)
{
struct local_info_t *local;
@@ -249,15 +222,6 @@ static int dio24_cs_attach(struct pcmcia_device *link)
return 0;
} /* dio24_cs_attach */
-/*======================================================================
-
- This deletes a driver "instance". The device is de-registered
- with Card Services. If it has been released, all local data
- structures are freed. Otherwise, the structures will be freed
- when the device is released.
-
-======================================================================*/
-
static void dio24_cs_detach(struct pcmcia_device *link)
{
@@ -273,14 +237,6 @@ static void dio24_cs_detach(struct pcmcia_device *link)
} /* dio24_cs_detach */
-/*======================================================================
-
- dio24_config() is scheduled to run after a CARD_INSERTION event
- is received, to configure the PCMCIA socket, and to make the
- device available to the system.
-
-======================================================================*/
-
static int dio24_pcmcia_config_loop(struct pcmcia_device *p_dev,
void *priv_data)
{
@@ -310,11 +266,6 @@ static void dio24_config(struct pcmcia_device *link)
if (!link->irq)
goto failed;
- /*
- This actually configures the PCMCIA socket -- setting up
- the I/O windows and the interrupt mapping, and putting the
- card and host interface into "Memory and IO" mode.
- */
ret = pcmcia_enable_device(link);
if (ret)
goto failed;
@@ -334,18 +285,6 @@ static void dio24_release(struct pcmcia_device *link)
pcmcia_disable_device(link);
} /* dio24_release */
-/*======================================================================
-
- The card status event handler. Mostly, this schedules other
- stuff to run after an event is received.
-
- When a CARD_REMOVAL event is received, we immediately set a
- private flag to block future accesses to this device. All the
- functions that actually access the device should check this flag
- to make sure the card is still present.
-
-======================================================================*/
-
static int dio24_cs_suspend(struct pcmcia_device *link)
{
struct local_info_t *local = link->priv;
diff --git a/drivers/staging/comedi/drivers/ni_labpc_cs.c b/drivers/staging/comedi/drivers/ni_labpc_cs.c
index 6b7c5d043b0a..6facbc8bf776 100644
--- a/drivers/staging/comedi/drivers/ni_labpc_cs.c
+++ b/drivers/staging/comedi/drivers/ni_labpc_cs.c
@@ -152,59 +152,20 @@ static int labpc_attach(struct comedi_device *dev, struct comedi_devconfig *it)
return labpc_common_attach(dev, iobase, irq, 0);
}
-/*====================================================================*/
-
-/*
- The event() function is this driver's Card Services event handler.
- It will be called by Card Services when an appropriate card status
- event is received. The config() and release() entry points are
- used to configure or release a socket, in response to card
- insertion and ejection events. They are invoked from the dummy
- event handler.
-
- Kernel version 2.6.16 upwards uses suspend() and resume() functions
- instead of an event() function.
-*/
-
static void labpc_config(struct pcmcia_device *link);
static void labpc_release(struct pcmcia_device *link);
static int labpc_cs_suspend(struct pcmcia_device *p_dev);
static int labpc_cs_resume(struct pcmcia_device *p_dev);
-/*
- The attach() and detach() entry points are used to create and destroy
- "instances" of the driver, where each instance represents everything
- needed to manage one actual PCMCIA card.
-*/
-
static int labpc_cs_attach(struct pcmcia_device *);
static void labpc_cs_detach(struct pcmcia_device *);
-/*
- You'll also need to prototype all the functions that will actually
- be used to talk to your device. See 'memory_cs' for a good example
- of a fully self-sufficient driver; the other drivers rely more or
- less on other parts of the kernel.
-*/
-
struct local_info_t {
struct pcmcia_device *link;
int stop;
struct bus_operations *bus;
};
-/*======================================================================
-
- labpc_cs_attach() creates an "instance" of the driver, allocating
- local data structures for one device. The device is registered
- with Card Services.
-
- The dev_link structure is initialized, but we don't actually
- configure the card at this point -- we wait until we receive a
- card insertion event.
-
-======================================================================*/
-
static int labpc_cs_attach(struct pcmcia_device *link)
{
struct local_info_t *local;
@@ -225,15 +186,6 @@ static int labpc_cs_attach(struct pcmcia_device *link)
return 0;
} /* labpc_cs_attach */
-/*======================================================================
-
- This deletes a driver "instance". The device is de-registered
- with Card Services. If it has been released, all local data
- structures are freed. Otherwise, the structures will be freed
- when the device is released.
-
-======================================================================*/
-
static void labpc_cs_detach(struct pcmcia_device *link)
{
dev_dbg(&link->dev, "labpc_cs_detach\n");
@@ -252,14 +204,6 @@ static void labpc_cs_detach(struct pcmcia_device *link)
} /* labpc_cs_detach */
-/*======================================================================
-
- labpc_config() is scheduled to run after a CARD_INSERTION event
- is received, to configure the PCMCIA socket, and to make the
- device available to the system.
-
-======================================================================*/
-
static int labpc_pcmcia_config_loop(struct pcmcia_device *p_dev,
void *priv_data)
{
@@ -288,11 +232,6 @@ static void labpc_config(struct pcmcia_device *link)
if (!link->irq)
goto failed;
- /*
- This actually configures the PCMCIA socket -- setting up
- the I/O windows and the interrupt mapping, and putting the
- card and host interface into "Memory and IO" mode.
- */
ret = pcmcia_enable_device(link);
if (ret)
goto failed;
@@ -311,18 +250,6 @@ static void labpc_release(struct pcmcia_device *link)
pcmcia_disable_device(link);
} /* labpc_release */
-/*======================================================================
-
- The card status event handler. Mostly, this schedules other
- stuff to run after an event is received.
-
- When a CARD_REMOVAL event is received, we immediately set a
- private flag to block future accesses to this device. All the
- functions that actually access the device should check this flag
- to make sure the card is still present.
-
-======================================================================*/
-
static int labpc_cs_suspend(struct pcmcia_device *link)
{
struct local_info_t *local = link->priv;
@@ -340,8 +267,6 @@ static int labpc_cs_resume(struct pcmcia_device *link)
return 0;
} /* labpc_cs_resume */
-/*====================================================================*/
-
static struct pcmcia_device_id labpc_cs_ids[] = {
/* N.B. These IDs should match those in labpc_cs_boards (ni_labpc.c) */
PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0103), /* daqcard-1200 */
diff --git a/drivers/staging/comedi/drivers/quatech_daqp_cs.c b/drivers/staging/comedi/drivers/quatech_daqp_cs.c
index 32fecf57868d..ebba9bb47777 100644
--- a/drivers/staging/comedi/drivers/quatech_daqp_cs.c
+++ b/drivers/staging/comedi/drivers/quatech_daqp_cs.c
@@ -968,43 +968,14 @@ static int daqp_detach(struct comedi_device *dev)
======================================================================*/
-/*
- The event() function is this driver's Card Services event handler.
- It will be called by Card Services when an appropriate card status
- event is received. The config() and release() entry points are
- used to configure or release a socket, in response to card
- insertion and ejection events.
-
- Kernel version 2.6.16 upwards uses suspend() and resume() functions
- instead of an event() function.
-*/
-
static void daqp_cs_config(struct pcmcia_device *link);
static void daqp_cs_release(struct pcmcia_device *link);
static int daqp_cs_suspend(struct pcmcia_device *p_dev);
static int daqp_cs_resume(struct pcmcia_device *p_dev);
-/*
- The attach() and detach() entry points are used to create and destroy
- "instances" of the driver, where each instance represents everything
- needed to manage one actual PCMCIA card.
-*/
-
static int daqp_cs_attach(struct pcmcia_device *);
static void daqp_cs_detach(struct pcmcia_device *);
-/*======================================================================
-
- daqp_cs_attach() creates an "instance" of the driver, allocating
- local data structures for one device. The device is registered
- with Card Services.
-
- The dev_link structure is initialized, but we don't actually
- configure the card at this point -- we wait until we receive a
- card insertion event.
-
-======================================================================*/
-
static int daqp_cs_attach(struct pcmcia_device *link)
{
struct local_info_t *local;
@@ -1035,15 +1006,6 @@ static int daqp_cs_attach(struct pcmcia_device *link)
return 0;
} /* daqp_cs_attach */
-/*======================================================================
-
- This deletes a driver "instance". The device is de-registered
- with Card Services. If it has been released, all local data
- structures are freed. Otherwise, the structures will be freed
- when the device is released.
-
-======================================================================*/
-
static void daqp_cs_detach(struct pcmcia_device *link)
{
struct local_info_t *dev = link->priv;
@@ -1059,15 +1021,6 @@ static void daqp_cs_detach(struct pcmcia_device *link)
} /* daqp_cs_detach */
-/*======================================================================
-
- daqp_cs_config() is scheduled to run after a CARD_INSERTION event
- is received, to configure the PCMCIA socket, and to make the
- device available to the system.
-
-======================================================================*/
-
-
static int daqp_pcmcia_config_loop(struct pcmcia_device *p_dev, void *priv_data)
{
if (p_dev->config_index == 0)
@@ -1094,11 +1047,6 @@ static void daqp_cs_config(struct pcmcia_device *link)
if (ret)
goto failed;
- /*
- This actually configures the PCMCIA socket -- setting up
- the I/O windows and the interrupt mapping, and putting the
- card and host interface into "Memory and IO" mode.
- */
ret = pcmcia_enable_device(link);
if (ret)
goto failed;
@@ -1117,18 +1065,6 @@ static void daqp_cs_release(struct pcmcia_device *link)
pcmcia_disable_device(link);
} /* daqp_cs_release */
-/*======================================================================
-
- The card status event handler. Mostly, this schedules other
- stuff to run after an event is received.
-
- When a CARD_REMOVAL event is received, we immediately set a
- private flag to block future accesses to this device. All the
- functions that actually access the device should check this flag
- to make sure the card is still present.
-
-======================================================================*/
-
static int daqp_cs_suspend(struct pcmcia_device *link)
{
struct local_info_t *local = link->priv;
diff --git a/drivers/staging/wlags49_h2/wl_cs.c b/drivers/staging/wlags49_h2/wl_cs.c
index aa3cc516fe18..6555891e149c 100644
--- a/drivers/staging/wlags49_h2/wl_cs.c
+++ b/drivers/staging/wlags49_h2/wl_cs.c
@@ -163,27 +163,6 @@ static int wl_adapter_attach(struct pcmcia_device *link)
-/*******************************************************************************
- * wl_adapter_detach()
- *******************************************************************************
- *
- * DESCRIPTION:
- *
- * This deletes a driver "instance". The device is de-registered with Card
- * Services. If it has been released, then the net device is unregistered, and
- * all local data structures are freed. Otherwise, the structures will be
- * freed when the device is released.
- *
- * PARAMETERS:
- *
- * link - pointer to the dev_link_t structure representing the device to
- * detach
- *
- * RETURNS:
- *
- * N/A
- *
- ******************************************************************************/
static void wl_adapter_detach(struct pcmcia_device *link)
{
struct net_device *dev = link->priv;
@@ -207,26 +186,6 @@ static void wl_adapter_detach(struct pcmcia_device *link)
/*============================================================================*/
-/*******************************************************************************
- * wl_adapter_release()
- *******************************************************************************
- *
- * DESCRIPTION:
- *
- * After a card is removed, this routine will release the PCMCIA
- * configuration. If the device is still open, this will be postponed until it
- * is closed.
- *
- * PARAMETERS:
- *
- * arg - a u_long representing a pointer to a dev_link_t structure for the
- * device to be released.
- *
- * RETURNS:
- *
- * N/A
- *
- ******************************************************************************/
void wl_adapter_release(struct pcmcia_device *link)
{
DBG_FUNC("wl_adapter_release");
@@ -266,26 +225,6 @@ static int wl_adapter_resume(struct pcmcia_device *link)
return 0;
} /* wl_adapter_resume */
-/*******************************************************************************
- * wl_adapter_insert()
- *******************************************************************************
- *
- * DESCRIPTION:
- *
- * wl_adapter_insert() is scheduled to run after a CARD_INSERTION event is
- * received, to configure the PCMCIA socket, and to make the ethernet device
- * available to the system.
- *
- * PARAMETERS:
- *
- * link - pointer to the dev_link_t structure representing the device to
- * insert
- *
- * RETURNS:
- *
- * N/A
- *
- ******************************************************************************/
void wl_adapter_insert(struct pcmcia_device *link)
{
struct net_device *dev;
diff --git a/drivers/staging/wlags49_h2/wl_main.c b/drivers/staging/wlags49_h2/wl_main.c
index 88d0d472142f..8e3536acbf46 100644
--- a/drivers/staging/wlags49_h2/wl_main.c
+++ b/drivers/staging/wlags49_h2/wl_main.c
@@ -414,25 +414,6 @@ extern memimage fw_image; // firmware image to be downloaded
#endif /* HCF_STA */
-/*******************************************************************************
- * wl_insert()
- *******************************************************************************
- *
- * DESCRIPTION:
- *
- * wl_insert() is scheduled to run after a CARD_INSERTION event is
- * received, to configure the PCMCIA socket, and to make the ethernet device
- * available to the system.
- *
- * PARAMETERS:
- *
- * dev - a pointer to the net_device struct of the wireless device
- *
- * RETURNS:
- *
- * TRUE or FALSE
- *
- ******************************************************************************/
int wl_insert( struct net_device *dev )
{
int result = 0;