summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--MAINTAINERS2
-rw-r--r--arch/arm/Makefile2
-rw-r--r--arch/arm/boot/dts/armada-370-xp.dtsi6
-rw-r--r--arch/arm/boot/dts/armada-xp-mv78260.dtsi2
-rw-r--r--arch/arm/boot/dts/armada-xp-mv78460.dtsi2
-rw-r--r--arch/arm/boot/dts/armada-xp.dtsi2
-rw-r--r--arch/arm/boot/dts/msm8660-surf.dts4
-rw-r--r--arch/arm/boot/dts/msm8960-cdp.dts2
-rw-r--r--arch/arm/mach-at91/Kconfig1
-rw-r--r--arch/arm/mach-at91/at91rm9200.c8
-rw-r--r--arch/arm/mach-at91/at91sam9260.c4
-rw-r--r--arch/arm/mach-at91/at91sam9261.c4
-rw-r--r--arch/arm/mach-at91/at91sam9263.c2
-rw-r--r--arch/arm/mach-at91/at91sam9g45.c2
-rw-r--r--arch/arm/mach-at91/at91sam9rl.c2
-rw-r--r--arch/arm/mach-at91/at91x40.c7
-rw-r--r--arch/arm/mach-at91/board-dt-sama5.c3
-rw-r--r--arch/arm/mach-at91/clock.c30
-rw-r--r--arch/arm/mach-at91/cpuidle.c2
-rw-r--r--arch/arm/mach-at91/generic.h2
-rw-r--r--arch/arm/mach-at91/include/mach/at91_pmc.h3
-rw-r--r--arch/arm/mach-at91/irq.c9
-rw-r--r--arch/arm/mach-at91/pm.c2
-rw-r--r--arch/arm/mach-at91/setup.c4
-rw-r--r--arch/arm/mach-at91/soc.h1
-rw-r--r--arch/arm/mach-davinci/board-sffsdr.c1
-rw-r--r--arch/arm/mach-msm/clock-debug.c2
-rw-r--r--arch/arm/mach-mxs/Kconfig2
-rw-r--r--arch/arm/mach-mxs/pm.h4
-rw-r--r--arch/arm/mach-omap2/board-cm-t35.c3
-rw-r--r--arch/arm/mach-omap2/board-devkit8000.c1
-rw-r--r--arch/arm/mach-omap2/board-ldp.c3
-rw-r--r--arch/arm/mach-omap2/board-omap3pandora.c1
-rw-r--r--arch/arm/mach-omap2/board-rx51-peripherals.c1
-rw-r--r--arch/arm/mach-omap2/control.c1
-rw-r--r--arch/arm/mach-omap2/devices.c12
-rw-r--r--arch/arm/mach-omap2/id.c2
-rw-r--r--arch/arm/mach-omap2/serial.c3
-rw-r--r--arch/arm/mach-omap2/twl-common.c1
-rw-r--r--arch/arm/mach-omap2/usb-host.c106
-rw-r--r--arch/arm/mach-prima2/common.c17
-rw-r--r--arch/arm/mach-prima2/pm.c2
-rw-r--r--arch/arm/mach-tegra/pmc.c2
-rw-r--r--drivers/char/hw_random/bcm2835-rng.c2
-rw-r--r--drivers/clk/Makefile2
-rw-r--r--drivers/clocksource/bcm_kona_timer.c15
-rw-r--r--drivers/cpuidle/Kconfig1
-rw-r--r--drivers/gpio/gpio-msm-v1.c2
-rw-r--r--drivers/i2c/busses/Kconfig2
-rw-r--r--drivers/irqchip/irq-renesas-irqc.c4
-rw-r--r--drivers/mtd/nand/Kconfig2
-rw-r--r--drivers/scsi/nsp32.c2
-rw-r--r--drivers/spi/Kconfig2
-rw-r--r--drivers/ssbi/ssbi.c1
-rw-r--r--drivers/tty/serial/Kconfig2
-rw-r--r--include/linux/irqchip.h4
-rwxr-xr-xlib/build_OID_registry2
57 files changed, 170 insertions, 145 deletions
diff --git a/MAINTAINERS b/MAINTAINERS
index 7fab3298d745..8128b141b92b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -797,6 +797,7 @@ F: arch/arm/mach-gemini/
ARM/CSR SIRFPRIMA2 MACHINE SUPPORT
M: Barry Song <baohua.song@csr.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/baohua/linux.git
S: Maintained
F: arch/arm/mach-prima2/
F: drivers/dma/sirf-dma.c
@@ -1135,6 +1136,7 @@ L: linux-samsung-soc@vger.kernel.org (moderated for non-subscribers)
S: Maintained
F: arch/arm/mach-s5p*/
F: arch/arm/mach-exynos*/
+N: exynos
ARM/SAMSUNG MOBILE MACHINE SUPPORT
M: Kyungmin Park <kyungmin.park@samsung.com>
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 1ba358ba16b8..7ea15176d109 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -168,7 +168,7 @@ machine-$(CONFIG_ARCH_OMAP1) += omap1
machine-$(CONFIG_ARCH_OMAP2PLUS) += omap2
machine-$(CONFIG_ARCH_ORION5X) += orion5x
machine-$(CONFIG_ARCH_PICOXCELL) += picoxcell
-machine-$(CONFIG_ARCH_PRIMA2) += prima2
+machine-$(CONFIG_ARCH_SIRF) += prima2
machine-$(CONFIG_ARCH_PXA) += pxa
machine-$(CONFIG_ARCH_REALVIEW) += realview
machine-$(CONFIG_ARCH_RPC) += rpc
diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi
index 550eb772c30e..52a1f5efc086 100644
--- a/arch/arm/boot/dts/armada-370-xp.dtsi
+++ b/arch/arm/boot/dts/armada-370-xp.dtsi
@@ -80,7 +80,7 @@
sata@a0000 {
compatible = "marvell,orion-sata";
- reg = <0xa0000 0x2400>;
+ reg = <0xa0000 0x5000>;
interrupts = <55>;
clocks = <&gateclk 15>, <&gateclk 30>;
clock-names = "0", "1";
@@ -96,7 +96,7 @@
ethernet@70000 {
compatible = "marvell,armada-370-neta";
- reg = <0x70000 0x2500>;
+ reg = <0x70000 0x4000>;
interrupts = <8>;
clocks = <&gateclk 4>;
status = "disabled";
@@ -104,7 +104,7 @@
ethernet@74000 {
compatible = "marvell,armada-370-neta";
- reg = <0x74000 0x2500>;
+ reg = <0x74000 0x4000>;
interrupts = <10>;
clocks = <&gateclk 3>;
status = "disabled";
diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
index f4029f015aff..2d9335da210c 100644
--- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
@@ -92,7 +92,7 @@
ethernet@34000 {
compatible = "marvell,armada-370-neta";
- reg = <0x34000 0x2500>;
+ reg = <0x34000 0x4000>;
interrupts = <14>;
clocks = <&gateclk 1>;
status = "disabled";
diff --git a/arch/arm/boot/dts/armada-xp-mv78460.dtsi b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
index 6ab56bd35de9..488ca5eb9a55 100644
--- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
@@ -107,7 +107,7 @@
ethernet@34000 {
compatible = "marvell,armada-370-neta";
- reg = <0x34000 0x2500>;
+ reg = <0x34000 0x4000>;
interrupts = <14>;
clocks = <&gateclk 1>;
status = "disabled";
diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi
index 5b902f9a3af2..1ee8540b0eba 100644
--- a/arch/arm/boot/dts/armada-xp.dtsi
+++ b/arch/arm/boot/dts/armada-xp.dtsi
@@ -88,7 +88,7 @@
ethernet@30000 {
compatible = "marvell,armada-370-neta";
- reg = <0x30000 0x2500>;
+ reg = <0x30000 0x4000>;
interrupts = <12>;
clocks = <&gateclk 2>;
status = "disabled";
diff --git a/arch/arm/boot/dts/msm8660-surf.dts b/arch/arm/boot/dts/msm8660-surf.dts
index 9bf49b3826ea..d347082d28f3 100644
--- a/arch/arm/boot/dts/msm8660-surf.dts
+++ b/arch/arm/boot/dts/msm8660-surf.dts
@@ -15,7 +15,7 @@
< 0x02081000 0x1000 >;
};
- timer@2000004 {
+ timer@2000000 {
compatible = "qcom,scss-timer", "qcom,msm-timer";
interrupts = <1 0 0x301>,
<1 1 0x301>,
@@ -26,7 +26,7 @@
cpu-offset = <0x40000>;
};
- serial@19c400000 {
+ serial@19c40000 {
compatible = "qcom,msm-hsuart", "qcom,msm-uart";
reg = <0x19c40000 0x1000>,
<0x19c00000 0x1000>;
diff --git a/arch/arm/boot/dts/msm8960-cdp.dts b/arch/arm/boot/dts/msm8960-cdp.dts
index 2e4d87a125d6..7c9ef9b80c15 100644
--- a/arch/arm/boot/dts/msm8960-cdp.dts
+++ b/arch/arm/boot/dts/msm8960-cdp.dts
@@ -26,7 +26,7 @@
cpu-offset = <0x80000>;
};
- serial@19c400000 {
+ serial@16440000 {
compatible = "qcom,msm-hsuart", "qcom,msm-uart";
reg = <0x16440000 0x1000>,
<0x16400000 0x1000>;
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 02802386b894..699b71e7f7ec 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -163,6 +163,7 @@ config MACH_SAMA5_DT
bool "Atmel SAMA5 Evaluation Kits with device-tree support"
depends on SOC_SAMA5
select USE_OF
+ select PHYLIB if NETDEVICES
help
Select this if you want to experiment device-tree with
an Atmel Evaluation Kit.
diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c
index d193a409bc45..9eb574397ee1 100644
--- a/arch/arm/mach-at91/at91rm9200.c
+++ b/arch/arm/mach-at91/at91rm9200.c
@@ -332,10 +332,6 @@ static void __init at91rm9200_initialize(void)
{
arm_pm_idle = at91rm9200_idle;
arm_pm_restart = at91rm9200_restart;
- at91_extern_irq = (1 << AT91RM9200_ID_IRQ0) | (1 << AT91RM9200_ID_IRQ1)
- | (1 << AT91RM9200_ID_IRQ2) | (1 << AT91RM9200_ID_IRQ3)
- | (1 << AT91RM9200_ID_IRQ4) | (1 << AT91RM9200_ID_IRQ5)
- | (1 << AT91RM9200_ID_IRQ6);
/* Initialize GPIO subsystem */
at91_gpio_init(at91rm9200_gpio,
@@ -388,6 +384,10 @@ static unsigned int at91rm9200_default_irq_priority[NR_AIC_IRQS] __initdata = {
AT91_SOC_START(at91rm9200)
.map_io = at91rm9200_map_io,
.default_irq_priority = at91rm9200_default_irq_priority,
+ .extern_irq = (1 << AT91RM9200_ID_IRQ0) | (1 << AT91RM9200_ID_IRQ1)
+ | (1 << AT91RM9200_ID_IRQ2) | (1 << AT91RM9200_ID_IRQ3)
+ | (1 << AT91RM9200_ID_IRQ4) | (1 << AT91RM9200_ID_IRQ5)
+ | (1 << AT91RM9200_ID_IRQ6),
.ioremap_registers = at91rm9200_ioremap_registers,
.register_clocks = at91rm9200_register_clocks,
.init = at91rm9200_initialize,
diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c
index a8ce24538da6..5de6074b4f4f 100644
--- a/arch/arm/mach-at91/at91sam9260.c
+++ b/arch/arm/mach-at91/at91sam9260.c
@@ -348,8 +348,6 @@ static void __init at91sam9260_initialize(void)
{
arm_pm_idle = at91sam9_idle;
arm_pm_restart = at91sam9_alt_restart;
- at91_extern_irq = (1 << AT91SAM9260_ID_IRQ0) | (1 << AT91SAM9260_ID_IRQ1)
- | (1 << AT91SAM9260_ID_IRQ2);
/* Register GPIO subsystem */
at91_gpio_init(at91sam9260_gpio, 3);
@@ -400,6 +398,8 @@ static unsigned int at91sam9260_default_irq_priority[NR_AIC_IRQS] __initdata = {
AT91_SOC_START(at91sam9260)
.map_io = at91sam9260_map_io,
.default_irq_priority = at91sam9260_default_irq_priority,
+ .extern_irq = (1 << AT91SAM9260_ID_IRQ0) | (1 << AT91SAM9260_ID_IRQ1)
+ | (1 << AT91SAM9260_ID_IRQ2),
.ioremap_registers = at91sam9260_ioremap_registers,
.register_clocks = at91sam9260_register_clocks,
.init = at91sam9260_initialize,
diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c
index 25efb5ac30f1..0e0793241ab7 100644
--- a/arch/arm/mach-at91/at91sam9261.c
+++ b/arch/arm/mach-at91/at91sam9261.c
@@ -290,8 +290,6 @@ static void __init at91sam9261_initialize(void)
{
arm_pm_idle = at91sam9_idle;
arm_pm_restart = at91sam9_alt_restart;
- at91_extern_irq = (1 << AT91SAM9261_ID_IRQ0) | (1 << AT91SAM9261_ID_IRQ1)
- | (1 << AT91SAM9261_ID_IRQ2);
/* Register GPIO subsystem */
at91_gpio_init(at91sam9261_gpio, 3);
@@ -342,6 +340,8 @@ static unsigned int at91sam9261_default_irq_priority[NR_AIC_IRQS] __initdata = {
AT91_SOC_START(at91sam9261)
.map_io = at91sam9261_map_io,
.default_irq_priority = at91sam9261_default_irq_priority,
+ .extern_irq = (1 << AT91SAM9261_ID_IRQ0) | (1 << AT91SAM9261_ID_IRQ1)
+ | (1 << AT91SAM9261_ID_IRQ2),
.ioremap_registers = at91sam9261_ioremap_registers,
.register_clocks = at91sam9261_register_clocks,
.init = at91sam9261_initialize,
diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c
index f44ffd2105a7..6ce7d1850893 100644
--- a/arch/arm/mach-at91/at91sam9263.c
+++ b/arch/arm/mach-at91/at91sam9263.c
@@ -327,7 +327,6 @@ static void __init at91sam9263_initialize(void)
{
arm_pm_idle = at91sam9_idle;
arm_pm_restart = at91sam9_alt_restart;
- at91_extern_irq = (1 << AT91SAM9263_ID_IRQ0) | (1 << AT91SAM9263_ID_IRQ1);
/* Register GPIO subsystem */
at91_gpio_init(at91sam9263_gpio, 5);
@@ -378,6 +377,7 @@ static unsigned int at91sam9263_default_irq_priority[NR_AIC_IRQS] __initdata = {
AT91_SOC_START(at91sam9263)
.map_io = at91sam9263_map_io,
.default_irq_priority = at91sam9263_default_irq_priority,
+ .extern_irq = (1 << AT91SAM9263_ID_IRQ0) | (1 << AT91SAM9263_ID_IRQ1),
.ioremap_registers = at91sam9263_ioremap_registers,
.register_clocks = at91sam9263_register_clocks,
.init = at91sam9263_initialize,
diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c
index 8b7fce067652..fda502691686 100644
--- a/arch/arm/mach-at91/at91sam9g45.c
+++ b/arch/arm/mach-at91/at91sam9g45.c
@@ -374,7 +374,6 @@ static void __init at91sam9g45_initialize(void)
{
arm_pm_idle = at91sam9_idle;
arm_pm_restart = at91sam9g45_restart;
- at91_extern_irq = (1 << AT91SAM9G45_ID_IRQ0);
/* Register GPIO subsystem */
at91_gpio_init(at91sam9g45_gpio, 5);
@@ -425,6 +424,7 @@ static unsigned int at91sam9g45_default_irq_priority[NR_AIC_IRQS] __initdata = {
AT91_SOC_START(at91sam9g45)
.map_io = at91sam9g45_map_io,
.default_irq_priority = at91sam9g45_default_irq_priority,
+ .extern_irq = (1 << AT91SAM9G45_ID_IRQ0),
.ioremap_registers = at91sam9g45_ioremap_registers,
.register_clocks = at91sam9g45_register_clocks,
.init = at91sam9g45_initialize,
diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c
index f77fae5591bc..d4ec0d9a9872 100644
--- a/arch/arm/mach-at91/at91sam9rl.c
+++ b/arch/arm/mach-at91/at91sam9rl.c
@@ -293,7 +293,6 @@ static void __init at91sam9rl_initialize(void)
{
arm_pm_idle = at91sam9_idle;
arm_pm_restart = at91sam9_alt_restart;
- at91_extern_irq = (1 << AT91SAM9RL_ID_IRQ0);
/* Register GPIO subsystem */
at91_gpio_init(at91sam9rl_gpio, 4);
@@ -344,6 +343,7 @@ static unsigned int at91sam9rl_default_irq_priority[NR_AIC_IRQS] __initdata = {
AT91_SOC_START(at91sam9rl)
.map_io = at91sam9rl_map_io,
.default_irq_priority = at91sam9rl_default_irq_priority,
+ .extern_irq = (1 << AT91SAM9RL_ID_IRQ0),
.ioremap_registers = at91sam9rl_ioremap_registers,
.register_clocks = at91sam9rl_register_clocks,
.init = at91sam9rl_initialize,
diff --git a/arch/arm/mach-at91/at91x40.c b/arch/arm/mach-at91/at91x40.c
index 19ca79396905..bad94b84a46f 100644
--- a/arch/arm/mach-at91/at91x40.c
+++ b/arch/arm/mach-at91/at91x40.c
@@ -55,8 +55,6 @@ static void at91x40_idle(void)
void __init at91x40_initialize(unsigned long main_clock)
{
arm_pm_idle = at91x40_idle;
- at91_extern_irq = (1 << AT91X40_ID_IRQ0) | (1 << AT91X40_ID_IRQ1)
- | (1 << AT91X40_ID_IRQ2);
}
/*
@@ -86,9 +84,10 @@ static unsigned int at91x40_default_irq_priority[NR_AIC_IRQS] __initdata = {
void __init at91x40_init_interrupts(unsigned int priority[NR_AIC_IRQS])
{
+ u32 extern_irq = (1 << AT91X40_ID_IRQ0) | (1 << AT91X40_ID_IRQ1)
+ | (1 << AT91X40_ID_IRQ2);
if (!priority)
priority = at91x40_default_irq_priority;
- at91_aic_init(priority, at91_extern_irq);
+ at91_aic_init(priority, extern_irq);
}
-
diff --git a/arch/arm/mach-at91/board-dt-sama5.c b/arch/arm/mach-at91/board-dt-sama5.c
index 705305e62bbc..ad95f6a23a28 100644
--- a/arch/arm/mach-at91/board-dt-sama5.c
+++ b/arch/arm/mach-at91/board-dt-sama5.c
@@ -62,7 +62,8 @@ static int ksz9021rn_phy_fixup(struct phy_device *phy)
static void __init sama5_dt_device_init(void)
{
- if (of_machine_is_compatible("atmel,sama5d3xcm"))
+ if (of_machine_is_compatible("atmel,sama5d3xcm") &&
+ IS_ENABLED(CONFIG_PHYLIB))
phy_register_fixup_for_uid(PHY_ID_KSZ9021, MICREL_PHY_ID_MASK,
ksz9021rn_phy_fixup);
diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c
index da841885d01c..6b2630a92f71 100644
--- a/arch/arm/mach-at91/clock.c
+++ b/arch/arm/mach-at91/clock.c
@@ -75,7 +75,7 @@ EXPORT_SYMBOL_GPL(at91_pmc_base);
#define cpu_has_pllb() (!(cpu_is_at91sam9rl() \
|| cpu_is_at91sam9g45() \
|| cpu_is_at91sam9x5() \
- || cpu_is_at91sam9n12()))
+ || cpu_is_sama5d3()))
#define cpu_has_upll() (cpu_is_at91sam9g45() \
|| cpu_is_at91sam9x5() \
@@ -489,7 +489,7 @@ static int at91_clk_show(struct seq_file *s, void *unused)
seq_printf(s, "UCKR = %8x\n", uckr);
}
seq_printf(s, "MCKR = %8x\n", at91_pmc_read(AT91_PMC_MCKR));
- if (cpu_has_upll())
+ if (cpu_has_upll() || cpu_is_at91sam9n12())
seq_printf(s, "USB = %8x\n", at91_pmc_read(AT91_PMC_USB));
seq_printf(s, "SR = %8x\n", sr);
@@ -614,6 +614,8 @@ static u32 __init at91_usb_rate(struct clk *pll, u32 freq, u32 reg)
{
if (pll == &pllb && (reg & AT91_PMC_USB96M))
return freq / 2;
+ else if (pll == &utmi_clk || cpu_is_at91sam9n12())
+ return freq / (1 + ((reg & AT91_PMC_OHCIUSBDIV) >> 8));
else
return freq;
}
@@ -683,6 +685,8 @@ static struct clk *const standard_pmc_clocks[] __initconst = {
/* PLLB generated USB full speed clock init */
static void __init at91_pllb_usbfs_clock_init(unsigned long main_clock)
{
+ unsigned int reg;
+
/*
* USB clock init: choose 48 MHz PLLB value,
* disable 48MHz clock during usb peripheral suspend.
@@ -691,22 +695,35 @@ static void __init at91_pllb_usbfs_clock_init(unsigned long main_clock)
*/
uhpck.parent = &pllb;
- at91_pllb_usb_init = at91_pll_calc(main_clock, 48000000 * 2) | AT91_PMC_USB96M;
+ reg = at91_pllb_usb_init = at91_pll_calc(main_clock, 48000000 * 2);
pllb.rate_hz = at91_pll_rate(&pllb, main_clock, at91_pllb_usb_init);
if (cpu_is_at91rm9200()) {
+ reg = at91_pllb_usb_init |= AT91_PMC_USB96M;
uhpck.pmc_mask = AT91RM9200_PMC_UHP;
udpck.pmc_mask = AT91RM9200_PMC_UDP;
at91_pmc_write(AT91_PMC_SCER, AT91RM9200_PMC_MCKUDP);
} else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() ||
cpu_is_at91sam9263() || cpu_is_at91sam9g20() ||
cpu_is_at91sam9g10()) {
+ reg = at91_pllb_usb_init |= AT91_PMC_USB96M;
+ uhpck.pmc_mask = AT91SAM926x_PMC_UHP;
+ udpck.pmc_mask = AT91SAM926x_PMC_UDP;
+ } else if (cpu_is_at91sam9n12()) {
+ /* Divider for USB clock is in USB clock register for 9n12 */
+ reg = AT91_PMC_USBS_PLLB;
+
+ /* For PLLB output 96M, set usb divider 2 (USBDIV + 1) */
+ reg |= AT91_PMC_OHCIUSBDIV_2;
+ at91_pmc_write(AT91_PMC_USB, reg);
+
+ /* Still setup masks */
uhpck.pmc_mask = AT91SAM926x_PMC_UHP;
udpck.pmc_mask = AT91SAM926x_PMC_UDP;
}
at91_pmc_write(AT91_CKGR_PLLBR, 0);
- udpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init);
- uhpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init);
+ udpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, reg);
+ uhpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, reg);
}
/* UPLL generated USB full speed clock init */
@@ -725,8 +742,7 @@ static void __init at91_upll_usbfs_clock_init(unsigned long main_clock)
/* Now set uhpck values */
uhpck.parent = &utmi_clk;
uhpck.pmc_mask = AT91SAM926x_PMC_UHP;
- uhpck.rate_hz = utmi_clk.rate_hz;
- uhpck.rate_hz /= 1 + ((at91_pmc_read(AT91_PMC_USB) & AT91_PMC_OHCIUSBDIV) >> 8);
+ uhpck.rate_hz = at91_usb_rate(&utmi_clk, utmi_clk.rate_hz, usbr);
}
static int __init at91_pmc_init(unsigned long main_clock)
diff --git a/arch/arm/mach-at91/cpuidle.c b/arch/arm/mach-at91/cpuidle.c
index 69f9e3bbf4e5..4ec6a6d9b9be 100644
--- a/arch/arm/mach-at91/cpuidle.c
+++ b/arch/arm/mach-at91/cpuidle.c
@@ -51,7 +51,7 @@ static struct cpuidle_driver at91_idle_driver = {
.states[1] = {
.enter = at91_enter_idle,
.exit_latency = 10,
- .target_residency = 100000,
+ .target_residency = 10000,
.flags = CPUIDLE_FLAG_TIME_VALID,
.name = "RAM_SR",
.desc = "WFI and DDR Self Refresh",
diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h
index 78ab06548658..f6de36aefe85 100644
--- a/arch/arm/mach-at91/generic.h
+++ b/arch/arm/mach-at91/generic.h
@@ -85,4 +85,4 @@ extern void __init at91_gpio_irq_setup(void);
extern int __init at91_gpio_of_irq_setup(struct device_node *node,
struct device_node *parent);
-extern int at91_extern_irq;
+extern u32 at91_get_extern_irq(void);
diff --git a/arch/arm/mach-at91/include/mach/at91_pmc.h b/arch/arm/mach-at91/include/mach/at91_pmc.h
index 2bd7f51b0b82..c604cc69acb5 100644
--- a/arch/arm/mach-at91/include/mach/at91_pmc.h
+++ b/arch/arm/mach-at91/include/mach/at91_pmc.h
@@ -130,7 +130,10 @@ extern void __iomem *at91_pmc_base;
#define AT91_PMC_USBS (0x1 << 0) /* USB OHCI Input clock selection */
#define AT91_PMC_USBS_PLLA (0 << 0)
#define AT91_PMC_USBS_UPLL (1 << 0)
+#define AT91_PMC_USBS_PLLB (1 << 0) /* [AT91SAMN12 only] */
#define AT91_PMC_OHCIUSBDIV (0xF << 8) /* Divider for USB OHCI Clock */
+#define AT91_PMC_OHCIUSBDIV_1 (0x0 << 8)
+#define AT91_PMC_OHCIUSBDIV_2 (0x1 << 8)
#define AT91_PMC_SMD 0x3c /* Soft Modem Clock Register [some SAM9 only] */
#define AT91_PMC_SMDS (0x1 << 0) /* SMD input clock selection */
diff --git a/arch/arm/mach-at91/irq.c b/arch/arm/mach-at91/irq.c
index e0ca59171022..3d192c5aee66 100644
--- a/arch/arm/mach-at91/irq.c
+++ b/arch/arm/mach-at91/irq.c
@@ -232,7 +232,14 @@ static void __maybe_unused at91_aic5_eoi(struct irq_data *d)
at91_aic_write(AT91_AIC5_EOICR, 0);
}
-unsigned long *at91_extern_irq;
+static unsigned long *at91_extern_irq;
+
+u32 at91_get_extern_irq(void)
+{
+ if (!at91_extern_irq)
+ return 0;
+ return *at91_extern_irq;
+}
#define is_extern_irq(hwirq) test_bit(hwirq, at91_extern_irq)
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 530db304ec5e..15afb5d9271f 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -212,7 +212,7 @@ static int at91_pm_enter(suspend_state_t state)
(at91_pmc_read(AT91_PMC_PCSR)
| (1 << AT91_ID_FIQ)
| (1 << AT91_ID_SYS)
- | (at91_extern_irq))
+ | (at91_get_extern_irq()))
& at91_aic_read(AT91_AIC_IMR),
state);
diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c
index e2f4bdd146d6..b17fbcf4d9e8 100644
--- a/arch/arm/mach-at91/setup.c
+++ b/arch/arm/mach-at91/setup.c
@@ -48,7 +48,7 @@ void __init at91_init_irq_default(void)
void __init at91_init_interrupts(unsigned int *priority)
{
/* Initialize the AIC interrupt controller */
- at91_aic_init(priority, at91_extern_irq);
+ at91_aic_init(priority, at91_boot_soc.extern_irq);
/* Enable GPIO interrupts */
at91_gpio_irq_setup();
@@ -80,7 +80,7 @@ void __init at91_init_sram(int bank, unsigned long base, unsigned int length)
desc->pfn = __phys_to_pfn(base);
desc->length = length;
- desc->type = MT_DEVICE;
+ desc->type = MT_MEMORY_NONCACHED;
pr_info("AT91: sram at 0x%lx of 0x%x mapped at 0x%lx\n",
base, length, desc->virtual);
diff --git a/arch/arm/mach-at91/soc.h b/arch/arm/mach-at91/soc.h
index 43a225f9e713..a1e1482c6da8 100644
--- a/arch/arm/mach-at91/soc.h
+++ b/arch/arm/mach-at91/soc.h
@@ -6,6 +6,7 @@
struct at91_init_soc {
int builtin;
+ u32 extern_irq;
unsigned int *default_irq_priority;
void (*map_io)(void);
void (*ioremap_registers)(void);
diff --git a/arch/arm/mach-davinci/board-sffsdr.c b/arch/arm/mach-davinci/board-sffsdr.c
index 739be7e738fe..513eee14f77d 100644
--- a/arch/arm/mach-davinci/board-sffsdr.c
+++ b/arch/arm/mach-davinci/board-sffsdr.c
@@ -151,7 +151,6 @@ static __init void davinci_sffsdr_init(void)
}
MACHINE_START(SFFSDR, "Lyrtech SFFSDR")
- /* Maintainer: Hugo Villeneuve hugo.villeneuve@lyrtech.com */
.atag_offset = 0x100,
.map_io = davinci_sffsdr_map_io,
.init_irq = davinci_irq_init,
diff --git a/arch/arm/mach-msm/clock-debug.c b/arch/arm/mach-msm/clock-debug.c
index 4886404d42f5..b0fbdf1cbdd1 100644
--- a/arch/arm/mach-msm/clock-debug.c
+++ b/arch/arm/mach-msm/clock-debug.c
@@ -104,7 +104,7 @@ int __init clock_debug_add(struct clk *clock)
if (!debugfs_base)
return -ENOMEM;
- strncpy(temp, clock->dbg_name, ARRAY_SIZE(temp)-1);
+ strlcpy(temp, clock->dbg_name, ARRAY_SIZE(temp));
for (ptr = temp; *ptr; ptr++)
*ptr = tolower(*ptr);
diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig
index 4dc2fbba0ecd..3a66635e7d17 100644
--- a/arch/arm/mach-mxs/Kconfig
+++ b/arch/arm/mach-mxs/Kconfig
@@ -3,7 +3,6 @@ config SOC_IMX23
select ARM_AMBA
select ARM_CPU_SUSPEND if PM
select CPU_ARM926T
- select HAVE_PWM
select PINCTRL_IMX23
config SOC_IMX28
@@ -12,7 +11,6 @@ config SOC_IMX28
select ARM_CPU_SUSPEND if PM
select CPU_ARM926T
select HAVE_CAN_FLEXCAN if CAN
- select HAVE_PWM
select PINCTRL_IMX28
config ARCH_MXS
diff --git a/arch/arm/mach-mxs/pm.h b/arch/arm/mach-mxs/pm.h
index f57e7cdece2e..09d77b00a96b 100644
--- a/arch/arm/mach-mxs/pm.h
+++ b/arch/arm/mach-mxs/pm.h
@@ -9,6 +9,10 @@
#ifndef __ARCH_MXS_PM_H
#define __ARCH_MXS_PM_H
+#ifdef CONFIG_PM
void mxs_pm_init(void);
+#else
+#define mxs_pm_init NULL
+#endif
#endif
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index ee6218c74807..d4622ed26252 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -293,7 +293,8 @@ static struct regulator_consumer_supply cm_t35_vsim_supply[] = {
static struct regulator_consumer_supply cm_t35_vio_supplies[] = {
REGULATOR_SUPPLY("vcc", "spi1.0"),
REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
- REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
+ REGULATOR_SUPPLY("vdds_dsi", "omapdss_dpi.0"),
+ REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi.0"),
};
/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index 576420544178..f1d91ba5d1ac 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -222,6 +222,7 @@ static struct twl4030_gpio_platform_data devkit8000_gpio_data = {
static struct regulator_consumer_supply devkit8000_vpll1_supplies[] = {
REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
+ REGULATOR_SUPPLY("vdds_dsi", "omapdss_dpi.0"),
REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi.0"),
};
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index d0d17bc58d9b..62e4f701b63b 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -272,7 +272,8 @@ static struct regulator_init_data ldp_vaux1 = {
static struct regulator_consumer_supply ldp_vpll2_supplies[] = {
REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
- REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
+ REGULATOR_SUPPLY("vdds_dsi", "omapdss_dpi.0"),
+ REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi.0"),
};
static struct regulator_init_data ldp_vpll2 = {
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index 28133d5b4fed..b1547a0edfcd 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -343,6 +343,7 @@ static struct regulator_consumer_supply pandora_vmmc3_supply[] = {
static struct regulator_consumer_supply pandora_vdds_supplies[] = {
REGULATOR_SUPPLY("vdds_sdi", "omapdss"),
REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
+ REGULATOR_SUPPLY("vdds_dsi", "omapdss_dpi.0"),
REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi.0"),
};
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index 18ca61e300b3..9c2dd102fbbb 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -553,6 +553,7 @@ static struct regulator_consumer_supply rx51_vio_supplies[] = {
static struct regulator_consumer_supply rx51_vaux1_consumers[] = {
REGULATOR_SUPPLY("vdds_sdi", "omapdss"),
+ REGULATOR_SUPPLY("vdds_sdi", "omapdss_sdi.0"),
/* Si4713 supply */
REGULATOR_SUPPLY("vdd", "2-0063"),
/* lis3lv02d */
diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c
index 2adb2683f074..31e0dfe4a4ea 100644
--- a/arch/arm/mach-omap2/control.c
+++ b/arch/arm/mach-omap2/control.c
@@ -249,6 +249,7 @@ void omap_ctrl_write_dsp_boot_addr(u32 bootaddr)
u32 offset = cpu_is_omap243x() ? OMAP243X_CONTROL_IVA2_BOOTADDR :
cpu_is_omap34xx() ? OMAP343X_CONTROL_IVA2_BOOTADDR :
cpu_is_omap44xx() ? OMAP4_CTRL_MODULE_CORE_DSP_BOOTADDR :
+ soc_is_omap54xx() ? OMAP4_CTRL_MODULE_CORE_DSP_BOOTADDR :
0;
if (!offset) {
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index 4269fc145698..daa0ff65f599 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -374,10 +374,8 @@ static void __init omap_init_mcpdm(void)
struct platform_device *pdev;
oh = omap_hwmod_lookup("mcpdm");
- if (!oh) {
- printk(KERN_ERR "Could not look up mcpdm hw_mod\n");
+ if (!oh)
return;
- }
pdev = omap_device_build("omap-mcpdm", -1, oh, NULL, 0);
WARN(IS_ERR(pdev), "Can't build omap_device for omap-mcpdm.\n");
@@ -395,10 +393,8 @@ static void __init omap_init_dmic(void)
struct platform_device *pdev;
oh = omap_hwmod_lookup("dmic");
- if (!oh) {
- pr_err("Could not look up dmic hw_mod\n");
+ if (!oh)
return;
- }
pdev = omap_device_build("omap-dmic", -1, oh, NULL, 0);
WARN(IS_ERR(pdev), "Can't build omap_device for omap-dmic.\n");
@@ -421,10 +417,8 @@ static void __init omap_init_hdmi_audio(void)
struct platform_device *pdev;
oh = omap_hwmod_lookup("dss_hdmi");
- if (!oh) {
- printk(KERN_ERR "Could not look up dss_hdmi hw_mod\n");
+ if (!oh)
return;
- }
pdev = omap_device_build("omap-hdmi-audio-dai", -1, oh, NULL, 0);
WARN(IS_ERR(pdev),
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index 1272c41d4749..54e4c16ce539 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -601,7 +601,7 @@ void __init omap2_set_globals_tap(u32 class, void __iomem *tap)
#ifdef CONFIG_SOC_BUS
-static const char const *omap_types[] = {
+static const char * const omap_types[] = {
[OMAP2_DEVICE_TYPE_TEST] = "TST",
[OMAP2_DEVICE_TYPE_EMU] = "EMU",
[OMAP2_DEVICE_TYPE_SEC] = "HS",
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index f6601563aa69..a7cf8d783bd0 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -176,6 +176,9 @@ static char *cmdline_find_option(char *str)
static int __init omap_serial_early_init(void)
{
+ if (of_have_populated_dt())
+ return -ENODEV;
+
do {
char oh_name[MAX_UART_HWMOD_NAME_LEN];
struct omap_hwmod *oh;
diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c
index 51e138cc5398..c05898fbd634 100644
--- a/arch/arm/mach-omap2/twl-common.c
+++ b/arch/arm/mach-omap2/twl-common.c
@@ -140,6 +140,7 @@ static struct regulator_init_data omap3_vdac_idata = {
static struct regulator_consumer_supply omap3_vpll2_supplies[] = {
REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
+ REGULATOR_SUPPLY("vdds_dsi", "omapdss_dpi.0"),
REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi.0"),
};
diff --git a/arch/arm/mach-omap2/usb-host.c b/arch/arm/mach-omap2/usb-host.c
index aa27d7f5cbb7..609b330e5110 100644
--- a/arch/arm/mach-omap2/usb-host.c
+++ b/arch/arm/mach-omap2/usb-host.c
@@ -28,6 +28,7 @@
#include <linux/io.h>
#include <linux/gpio.h>
#include <linux/usb/phy.h>
+#include <linux/usb/nop-usb-xceiv.h>
#include "soc.h"
#include "omap_device.h"
@@ -560,7 +561,8 @@ static int usbhs_add_regulator(char *name, char *dev_id, char *dev_supply,
struct regulator_init_data *reg_data;
struct fixed_voltage_config *config;
struct platform_device *pdev;
- int ret;
+ struct platform_device_info pdevinfo;
+ int ret = -ENOMEM;
supplies = kzalloc(sizeof(*supplies), GFP_KERNEL);
if (!supplies)
@@ -571,7 +573,7 @@ static int usbhs_add_regulator(char *name, char *dev_id, char *dev_supply,
reg_data = kzalloc(sizeof(*reg_data), GFP_KERNEL);
if (!reg_data)
- return -ENOMEM;
+ goto err_data;
reg_data->constraints.valid_ops_mask = REGULATOR_CHANGE_STATUS;
reg_data->consumer_supplies = supplies;
@@ -580,39 +582,53 @@ static int usbhs_add_regulator(char *name, char *dev_id, char *dev_supply,
config = kmemdup(&hsusb_reg_config, sizeof(hsusb_reg_config),
GFP_KERNEL);
if (!config)
- return -ENOMEM;
+ goto err_config;
+
+ config->supply_name = kstrdup(name, GFP_KERNEL);
+ if (!config->supply_name)
+ goto err_supplyname;
- config->supply_name = name;
config->gpio = gpio;
config->enable_high = polarity;
config->init_data = reg_data;
/* create a regulator device */
- pdev = kzalloc(sizeof(*pdev), GFP_KERNEL);
- if (!pdev)
- return -ENOMEM;
+ memset(&pdevinfo, 0, sizeof(pdevinfo));
+ pdevinfo.name = reg_name;
+ pdevinfo.id = PLATFORM_DEVID_AUTO;
+ pdevinfo.data = config;
+ pdevinfo.size_data = sizeof(*config);
- pdev->id = PLATFORM_DEVID_AUTO;
- pdev->name = reg_name;
- pdev->dev.platform_data = config;
+ pdev = platform_device_register_full(&pdevinfo);
+ if (IS_ERR(pdev)) {
+ ret = PTR_ERR(pdev);
+ pr_err("%s: Failed registering regulator %s for %s : %d\n",
+ __func__, name, dev_id, ret);
+ goto err_register;
+ }
- ret = platform_device_register(pdev);
- if (ret)
- pr_err("%s: Failed registering regulator %s for %s\n",
- __func__, name, dev_id);
+ return 0;
+err_register:
+ kfree(config->supply_name);
+err_supplyname:
+ kfree(config);
+err_config:
+ kfree(reg_data);
+err_data:
+ kfree(supplies);
return ret;
}
+#define MAX_STR 20
+
int usbhs_init_phys(struct usbhs_phy_data *phy, int num_phys)
{
- char *rail_name;
- int i, len;
+ char rail_name[MAX_STR];
+ int i;
struct platform_device *pdev;
char *phy_id;
-
- /* the phy_id will be something like "nop_usb_xceiv.1" */
- len = strlen(nop_name) + 3; /* 3 -> ".1" and NULL terminator */
+ struct platform_device_info pdevinfo;
for (i = 0; i < num_phys; i++) {
@@ -627,25 +643,26 @@ int usbhs_init_phys(struct usbhs_phy_data *phy, int num_phys)
!gpio_is_valid(phy->vcc_gpio))
continue;
- /* create a NOP PHY device */
- pdev = kzalloc(sizeof(*pdev), GFP_KERNEL);
- if (!pdev)
- return -ENOMEM;
-
- pdev->id = phy->port;
- pdev->name = nop_name;
- pdev->dev.platform_data = phy->platform_data;
-
- phy_id = kmalloc(len, GFP_KERNEL);
- if (!phy_id)
+ phy_id = kmalloc(MAX_STR, GFP_KERNEL);
+ if (!phy_id) {
+ pr_err("%s: kmalloc() failed\n", __func__);
return -ENOMEM;
+ }
- scnprintf(phy_id, len, "nop_usb_xceiv.%d\n",
- pdev->id);
-
- if (platform_device_register(pdev)) {
- pr_err("%s: Failed to register device %s\n",
- __func__, phy_id);
+ /* create a NOP PHY device */
+ memset(&pdevinfo, 0, sizeof(pdevinfo));
+ pdevinfo.name = nop_name;
+ pdevinfo.id = phy->port;
+ pdevinfo.data = phy->platform_data;
+ pdevinfo.size_data = sizeof(struct nop_usb_xceiv_platform_data);
+
+ scnprintf(phy_id, MAX_STR, "nop_usb_xceiv.%d",
+ phy->port);
+ pdev = platform_device_register_full(&pdevinfo);
+ if (IS_ERR(pdev)) {
+ pr_err("%s: Failed to register device %s : %ld\n",
+ __func__, phy_id, PTR_ERR(pdev));
+ kfree(phy_id);
continue;
}
@@ -653,26 +670,15 @@ int usbhs_init_phys(struct usbhs_phy_data *phy, int num_phys)
/* Do we need RESET regulator ? */
if (gpio_is_valid(phy->reset_gpio)) {
-
- rail_name = kmalloc(13, GFP_KERNEL);
- if (!rail_name)
- return -ENOMEM;
-
- scnprintf(rail_name, 13, "hsusb%d_reset", phy->port);
-
+ scnprintf(rail_name, MAX_STR,
+ "hsusb%d_reset", phy->port);
usbhs_add_regulator(rail_name, phy_id, "reset",
phy->reset_gpio, 1);
}
/* Do we need VCC regulator ? */
if (gpio_is_valid(phy->vcc_gpio)) {
-
- rail_name = kmalloc(13, GFP_KERNEL);
- if (!rail_name)
- return -ENOMEM;
-
- scnprintf(rail_name, 13, "hsusb%d_vcc", phy->port);
-
+ scnprintf(rail_name, MAX_STR, "hsusb%d_vcc", phy->port);
usbhs_add_regulator(rail_name, phy_id, "vcc",
phy->vcc_gpio, phy->vcc_polarity);
}
diff --git a/arch/arm/mach-prima2/common.c b/arch/arm/mach-prima2/common.c
index 4f94cd87972a..e588c2152133 100644
--- a/arch/arm/mach-prima2/common.c
+++ b/arch/arm/mach-prima2/common.c
@@ -17,16 +17,6 @@
#include <linux/of_platform.h>
#include "common.h"
-static struct of_device_id sirfsoc_of_bus_ids[] __initdata = {
- { .compatible = "simple-bus", },
- {},
-};
-
-void __init sirfsoc_mach_init(void)
-{
- of_platform_bus_probe(NULL, sirfsoc_of_bus_ids, NULL);
-}
-
void __init sirfsoc_init_late(void)
{
sirfsoc_pm_init();
@@ -57,7 +47,6 @@ DT_MACHINE_START(ATLAS6_DT, "Generic ATLAS6 (Flattened Device Tree)")
.map_io = sirfsoc_map_io,
.init_irq = irqchip_init,
.init_time = sirfsoc_init_time,
- .init_machine = sirfsoc_mach_init,
.init_late = sirfsoc_init_late,
.dt_compat = atlas6_dt_match,
.restart = sirfsoc_restart,
@@ -66,8 +55,8 @@ MACHINE_END
#ifdef CONFIG_ARCH_PRIMA2
static const char *prima2_dt_match[] __initdata = {
- "sirf,prima2",
- NULL
+ "sirf,prima2",
+ NULL
};
DT_MACHINE_START(PRIMA2_DT, "Generic PRIMA2 (Flattened Device Tree)")
@@ -77,7 +66,6 @@ DT_MACHINE_START(PRIMA2_DT, "Generic PRIMA2 (Flattened Device Tree)")
.init_irq = irqchip_init,
.init_time = sirfsoc_init_time,
.dma_zone_size = SZ_256M,
- .init_machine = sirfsoc_mach_init,
.init_late = sirfsoc_init_late,
.dt_compat = prima2_dt_match,
.restart = sirfsoc_restart,
@@ -96,7 +84,6 @@ DT_MACHINE_START(MARCO_DT, "Generic MARCO (Flattened Device Tree)")
.map_io = sirfsoc_map_io,
.init_irq = irqchip_init,
.init_time = sirfsoc_init_time,
- .init_machine = sirfsoc_mach_init,
.init_late = sirfsoc_init_late,
.dt_compat = marco_dt_match,
.restart = sirfsoc_restart,
diff --git a/arch/arm/mach-prima2/pm.c b/arch/arm/mach-prima2/pm.c
index 8f595c0cc8d9..02cc34388b05 100644
--- a/arch/arm/mach-prima2/pm.c
+++ b/arch/arm/mach-prima2/pm.c
@@ -9,7 +9,7 @@
#include <linux/kernel.h>
#include <linux/suspend.h>
#include <linux/slab.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_device.h>
diff --git a/arch/arm/mach-tegra/pmc.c b/arch/arm/mach-tegra/pmc.c
index 32360e540ce6..eb3fa4aee0e4 100644
--- a/arch/arm/mach-tegra/pmc.c
+++ b/arch/arm/mach-tegra/pmc.c
@@ -234,7 +234,7 @@ static const struct of_device_id matches[] __initconst = {
{ }
};
-static void tegra_pmc_parse_dt(void)
+static void __init tegra_pmc_parse_dt(void)
{
struct device_node *np;
u32 prop;
diff --git a/drivers/char/hw_random/bcm2835-rng.c b/drivers/char/hw_random/bcm2835-rng.c
index eb7f14725ebd..43577ca780e3 100644
--- a/drivers/char/hw_random/bcm2835-rng.c
+++ b/drivers/char/hw_random/bcm2835-rng.c
@@ -110,4 +110,4 @@ module_platform_driver(bcm2835_rng_driver);
MODULE_AUTHOR("Lubomir Rintel <lkundrak@v3.sk>");
MODULE_DESCRIPTION("BCM2835 Random Number Generator (RNG) driver");
-MODULE_LICENSE("GPLv2");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index 137d3e730f86..f0e46997bb12 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -18,7 +18,7 @@ obj-$(CONFIG_ARCH_SOCFPGA) += socfpga/
obj-$(CONFIG_PLAT_SPEAR) += spear/
obj-$(CONFIG_ARCH_U300) += clk-u300.o
obj-$(CONFIG_COMMON_CLK_VERSATILE) += versatile/
-obj-$(CONFIG_ARCH_PRIMA2) += clk-prima2.o
+obj-$(CONFIG_ARCH_SIRF) += clk-prima2.o
obj-$(CONFIG_PLAT_ORION) += mvebu/
ifeq ($(CONFIG_COMMON_CLK), y)
obj-$(CONFIG_ARCH_MMP) += mmp/
diff --git a/drivers/clocksource/bcm_kona_timer.c b/drivers/clocksource/bcm_kona_timer.c
index 350f49356458..ba3d85904c9a 100644
--- a/drivers/clocksource/bcm_kona_timer.c
+++ b/drivers/clocksource/bcm_kona_timer.c
@@ -103,16 +103,10 @@ static const struct of_device_id bcm_timer_ids[] __initconst = {
{},
};
-static void __init kona_timers_init(void)
+static void __init kona_timers_init(struct device_node *node)
{
- struct device_node *node;
u32 freq;
- node = of_find_matching_node(NULL, bcm_timer_ids);
-
- if (!node)
- panic("No timer");
-
if (!of_property_read_u32(node, "clock-frequency", &freq))
arch_timer_rate = freq;
else
@@ -199,13 +193,12 @@ static struct irqaction kona_timer_irq = {
.handler = kona_timer_interrupt,
};
-static void __init kona_timer_init(void)
+static void __init kona_timer_init(struct device_node *node)
{
- kona_timers_init();
+ kona_timers_init(node);
kona_timer_clockevents_init();
setup_irq(timers.tmr_irq, &kona_timer_irq);
kona_timer_set_next_event((arch_timer_rate / HZ), NULL);
}
-CLOCKSOURCE_OF_DECLARE(bcm_kona, "bcm,kona-timer",
- kona_timer_init);
+CLOCKSOURCE_OF_DECLARE(bcm_kona, "bcm,kona-timer", kona_timer_init);
diff --git a/drivers/cpuidle/Kconfig b/drivers/cpuidle/Kconfig
index c4cc27e5c8a5..e21cdfa4002a 100644
--- a/drivers/cpuidle/Kconfig
+++ b/drivers/cpuidle/Kconfig
@@ -36,6 +36,7 @@ if CPU_IDLE
config CPU_IDLE_CALXEDA
bool "CPU Idle Driver for Calxeda processors"
depends on ARCH_HIGHBANK
+ select ARM_CPU_SUSPEND
help
Select this to enable cpuidle on Calxeda processors.
diff --git a/drivers/gpio/gpio-msm-v1.c b/drivers/gpio/gpio-msm-v1.c
index c798585a3fe5..fb2cc90d0134 100644
--- a/drivers/gpio/gpio-msm-v1.c
+++ b/drivers/gpio/gpio-msm-v1.c
@@ -630,7 +630,7 @@ static struct irq_chip msm_gpio_irq_chip = {
.irq_set_type = msm_gpio_irq_set_type,
};
-static int __devinit gpio_msm_v1_probe(struct platform_device *pdev)
+static int gpio_msm_v1_probe(struct platform_device *pdev)
{
int i, j = 0;
const struct platform_device_id *dev_id = platform_get_device_id(pdev);
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 631736e2e7ed..73e2e7db2b64 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -685,7 +685,7 @@ config I2C_SIMTEC
config I2C_SIRF
tristate "CSR SiRFprimaII I2C interface"
- depends on ARCH_PRIMA2
+ depends on ARCH_SIRF
help
If you say yes to this option, support will be included for the
CSR SiRFprimaII I2C interface.
diff --git a/drivers/irqchip/irq-renesas-irqc.c b/drivers/irqchip/irq-renesas-irqc.c
index 927bff373aac..2f404ba61c6c 100644
--- a/drivers/irqchip/irq-renesas-irqc.c
+++ b/drivers/irqchip/irq-renesas-irqc.c
@@ -248,8 +248,8 @@ static int irqc_probe(struct platform_device *pdev)
return 0;
err3:
- for (; k >= 0; k--)
- free_irq(p->irq[k - 1].requested_irq, &p->irq[k - 1]);
+ while (--k >= 0)
+ free_irq(p->irq[k].requested_irq, &p->irq[k]);
irq_domain_remove(p->irq_domain);
err2:
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index a60f6c17f57b..50543f166215 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -95,7 +95,7 @@ config MTD_NAND_OMAP2
config MTD_NAND_OMAP_BCH
depends on MTD_NAND && MTD_NAND_OMAP2 && ARCH_OMAP3
- bool "Enable support for hardware BCH error correction"
+ tristate "Enable support for hardware BCH error correction"
default n
select BCH
select BCH_CONST_PARAMS
diff --git a/drivers/scsi/nsp32.c b/drivers/scsi/nsp32.c
index 1e3879dcbdcc..0665f9cfdb02 100644
--- a/drivers/scsi/nsp32.c
+++ b/drivers/scsi/nsp32.c
@@ -2899,7 +2899,7 @@ static void nsp32_do_bus_reset(nsp32_hw_data *data)
* reset SCSI bus
*/
nsp32_write1(base, SCSI_BUS_CONTROL, BUSCTL_RST);
- udelay(RESET_HOLD_TIME);
+ mdelay(RESET_HOLD_TIME / 1000);
nsp32_write1(base, SCSI_BUS_CONTROL, 0);
for(i = 0; i < 5; i++) {
intrdat = nsp32_read2(base, IRQ_STATUS); /* dummy read */
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 92a9345d7a6b..10f99f45a29b 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -404,7 +404,7 @@ config SPI_SH_HSPI
config SPI_SIRF
tristate "CSR SiRFprimaII SPI controller"
- depends on ARCH_PRIMA2
+ depends on ARCH_SIRF
select SPI_BITBANG
help
SPI driver for CSR SiRFprimaII SoCs
diff --git a/drivers/ssbi/ssbi.c b/drivers/ssbi/ssbi.c
index f32da0258a8e..e561d3be54a5 100644
--- a/drivers/ssbi/ssbi.c
+++ b/drivers/ssbi/ssbi.c
@@ -350,6 +350,7 @@ static struct of_device_id ssbi_match_table[] = {
{ .compatible = "qcom,ssbi" },
{}
};
+MODULE_DEVICE_TABLE(of, ssbi_match_table);
static struct platform_driver ssbi_driver = {
.probe = ssbi_probe,
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 46dd1c72feda..5e3d68917ffe 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -251,7 +251,7 @@ config SERIAL_SAMSUNG_CONSOLE
config SERIAL_SIRFSOC
tristate "SiRF SoC Platform Serial port support"
- depends on ARCH_PRIMA2
+ depends on ARCH_SIRF
select SERIAL_CORE
help
Support for the on-chip UART on the CSR SiRFprimaII series,
diff --git a/include/linux/irqchip.h b/include/linux/irqchip.h
index e0006f1d35a0..14d79131f53d 100644
--- a/include/linux/irqchip.h
+++ b/include/linux/irqchip.h
@@ -11,6 +11,10 @@
#ifndef _LINUX_IRQCHIP_H
#define _LINUX_IRQCHIP_H
+#ifdef CONFIG_IRQCHIP
void irqchip_init(void);
+#else
+static inline void irqchip_init(void) {}
+#endif
#endif
diff --git a/lib/build_OID_registry b/lib/build_OID_registry
index dfbdaab81bc8..5d9827217360 100755
--- a/lib/build_OID_registry
+++ b/lib/build_OID_registry
@@ -50,8 +50,6 @@ my @indices = ();
my @lengths = ();
my $total_length = 0;
-print "Compiling ", $#names + 1, " OIDs\n";
-
for (my $i = 0; $i <= $#names; $i++) {
my $name = $names[$i];
my $oid = $oids[$i];